-
Design Manual Connectors:HVP connectors SPP connectors
-
Page 2
Fast, simple and precise: for the best result
PitzlMetallbauGmbH & Co. KG
DIN18800
For more information and technical details, downloads and helpful video tutorials: www.pitzl.de Alternatively, our competent staff are always available for advice:
+49 8703 9346-0 or via e-mail to [email protected]
Welcome to the world of PITZL
Connectors
ETA-11/0295 European Technical ApprovalAll HVP connectors of Pitzl GmbH & Co. KG have been appro-
ved through ETA -11/0295. Holder of approval:
Pitzl GmbH & Co. KG, Siemensstrae 26, DE-84051 Altheim
Tel.: +49 (0) 8703 9346-0, Telefax: +49 (0) 8703 9346-55,
Internet: www.pitzl.de Generic type and use of construction product:
Three-dimensional nailing plate (joist end connector for wood-
to-wood connections, wood-to-concrete and steel connections)
(Valid from: 2013-04-30 to: 2018-01-02)Manufacturing plant:
Pitzl GmbH & Co. KG, Siemensstrae 26, DE-84051 Altheim
This is Pitzl As a leading full-range supplier for wood connection systems, we are consistently trying to develop and optimise our products
further. The Pitzl range includes post bases, balcony and fence posts, plug-in connector systems as well as post-purlin connections.
Naturally, we also offer individual, custom-made solutions for your specific range of applications.
HVP connectors HVP connectors are two-part connectors made of anodised
aluminium (for the optimum gliding quality without the need
for lubricants). They are equally suitable for wood-to-wood,
wood-to-concrete and wood-to-steel connections.
SPP connectorsSPP post-purlin connectors the ideal solution for tensile con-
nections or wood connections with combined load types, such
as post-purlin connections.
ETA-10/0413European Technical ApprovalAll SPP connectors of Pitzl GmbH & Co. KG have been appro-
ved through ETA -10/0413. Holder of approval:
Pitzl GmbH & Co. KG, Siemensstrae 26, DE-84051 Altheim
Tel.: +49 (0) 8703 9346-0, Telefax: +49 (0) 8703 9346-55,
Internet: www.pitzl.de Generic type and use of construction product:
Three-dimensional nailing plate (Post bases for the support of
timber columns and posts as load-bearing elements and Con-
nectors for posts and purlins as load-bearing elements)
(Valid from: 2013-05-09 to: 2018-05-09)Manufacturing plant:
Pitzl GmbH & Co. KG, Siemensstrae 26, DE-84051 Altheim
-
Page 3
PitzlMetallbauGmbH & Co. KG
DIN18800
For more information and technical details, downloads and helpful video tutorials: www.pitzl.de Alternatively, our competent staff are always available for advice:
+49 8703 9346-0 or via e-mail to [email protected]
Connectors
THE CONNNECTORS DESIGN MANUAL The HVP plug-in connector system offers flexible and swift handling as well as fast planning and dimensioning of individual con-
nections. In addition to the comprehensive statics manual, we provide an easy-to-use pre-dimensioning tool. You will find the free
Design Manual for download here: www.pitzl.de/statikhandbuch.
Our pre-dimensioning tool can be found here: www.pitzl.de/bemessungstool
Contents A/ HVP Connectors
1. General points p.4
2. Design concept p.4
3. Formulas p.5
3.1. Materials p.6
3.2. Timber-to-timber connections p.7
3.3 Timber-to-concrete or timber-to-steel connections (HVP 8211B to 8460B) p.9
4. Resistance to fire p.10
5. Tables of load-carrying capacity for Spax screws p.11
5.1. Materials p.11
5.2. Characteristic load-carrying capacities p.11
6. Timber dimensions p.16
6.1. Minimal timber dimensions and distances to the edges p.16
6.2. Splitting capacity p.23
7. Connections to concrete p.26
B/ Post-purlin connectors
1. Characteristics p.27
2. Design load-carrying capacity p.28
3. Characteristic load-carrying capacity p.29
-
Page 4
Fast, simple and precise: for the best result
PitzlMetallbauGmbH & Co. KG
DIN18800
Design Manual connectors
For more information and technical details, downloads and helpful video tutorials: www.pitzl.de Alternatively, our competent staff are always available for advice:
+49 8703 9346-0 or via e-mail to [email protected]
A/ HVP concealed connectors1. General pointsPitzl HVP connectors are two-piece,face-fixed beam hangers for connections of joist to header (beam or column).
The load-carrying capacity of the Pitzl HVP connectors is determined by calculation assisted by tests.
In the following formulas are given to calculate the load-carrying ca-pacities according to the European Technical Approval ETA-11/0295.
Thanks to a timber or wood-based panel protection on all sides the Pitzl HVP connectors can verify a fire resistance up to 60min.The cal-culation concept is to find in Part 4,such as in the European Technical Approval ETA-11/0295.
For typical material combinations and geometry the characteristic load-carrying capacity is given in the tables of the Part 5 for Spax screws.
Pitzl HVP connectors can as well be used with screws from other manufacturers.Tables with load-carrying capacities for other screws are available on demand.
2. Design conceptPitzl HVP connectors shall be designed according to Eurocode 5 or a similar national Timber Code.The following formulas were deter-mined taking account of the European norm Eurocode 5: Design of timber structures (EN 1995-1-1) and take also into considera-tion the current state of technical development in terms of safety concept,dimensioning and design.
On the action side the characteristic loads are increased by the safety partial coefficients (G = 1,35 for permanent actions, Q= 1,5 for variable actions).
Whereas on the resistance side the characteristic load-carrying capaci-ties are reduced by division with the partial coefficient M.
For wood-based materials the influence of the service class and the load-duration class is additionally to take into account by the modifi-cation coefficient kmod.
2
2
2 2
2
2
2 2
mit
2
2
2 2
2
2
2 2
(Fundamental combination) according to EN 1990
2
2
2 2
2
2
2 2
M = 1,3 for solid timber according to EN 1995-1-1
M = 1,25 for glued laminated timber according to EN 1995-1-1
-
Page 5
Pfostentrger Stecksystemgalvanisch verzinkt zinip beschichtet
*In Einschubrichtung mit Schrauben 8 x 180 mm Vollgewinde, Holz GL 28h**Andere Holzklassen oder Schraubenlngen knnen Sie aus unserem Statik-Buch, das Sie unter [email protected] anfordern knnen, entnehmen.
Wichtige Informationen:tem acesti omnis adis re pratior atus. Ga. TaepelXerferorum et, corrovit ventiis sunt et lam este dentium as aliqui to que reiciis as desequiatem rem quae. Nem. Namus a non rectem ut di alique solupid ellest, anducit facilla niatus quatur? Neseni sapedipsam aspedita nonseca eperiossit aut ex etur sita dolupta tistis et aut ipidestior assunt, quos
PitzlMetallbauGmbH & Co. KG
DIN18800
Design Manual connectors
For more information and technical details, downloads and helpful video tutorials: www.pitzl.de Alternatively, our competent staff are always available for advice:
+49 8703 9346-0 or via e-mail to [email protected]
Modification coefficient kmod according to EN 1995-1-1
Material Service class Load-duration class
Permanent action Long term action Medium term action Short term action Instantaneous action
Solid timber and glued laminated timber
1 0,60 0,70 0,80 0,90 1,10
2 0,60 0,70 0,80 0,90 1,10
3 0,50 0,55 0,65 0,70 0,90
3. FormulasIn the following formulas are given to calculate the load-carrying capacities,such as they are also to find in the European Technical Approval ETA-11/0295. So the load-carrying capacity of the connec-tion can be calculated depending on the load-carrying capacity of the chosen wood-based material, such as the connection geometry (inclined joist).
Pitzl HVP connectors are designed for use in service classes 1 and 2.
The load-carrying capacities are given for loads in the direction of insertion (F2),against the direction of insertion (F3) and perpendicu-lar to the direction of insertion (F4) as well as perpendicular to the connector plane (F1).
The force in the direction of insertion (F2),the force against the direc-tion of insertion (F3) and the force perpendicular to connector plane (F1) are supposed to act in the joist axis.
The torsion moment from the joist connection must be taken into account for the design and the storage of the header.
The verification of the connection of the HVP connector to concrete or steel elements must be led with the given shear force.
The given load-carrying capacities are valid on the condition that all designed fasteners are built in.The header connections to concrete or steel elements must be built with at least 2 fasteners in the upper holes.
-
Page 6
Fast, simple and precise: for the best result
PitzlMetallbauGmbH & Co. KG
DIN18800
Design Manual connectors
For more information and technical details, downloads and helpful video tutorials: www.pitzl.de Alternatively, our competent staff are always available for advice:
+49 8703 9346-0 or via e-mail to [email protected]
3.1. MaterialsWood-based materials: Solid timber from softwood according to EN 338 / EN 14081 Glued laminated timber classified to GL24-GL36 according to EN 1194 / EN 14038 LVL according to EN 14374 Wood-based materials according to Approval (for example cross laminated timber)
Fasteners: Wood screws from different manufacturers (according to EN 14592 or European Technical Approval)
HVP connector Length
8045 and 8075 4,5 50 - 80
8160 to 8320 5,0 60 - 80
8420 to 8460 8,0 120 - 180
Screws for protection against lifting (Order with A after the connector number)
HVP connector Lnge Typ
8075 to 8320 4,0 30 Self-tapping screws according to DIN 7500-1:2009-06
8420 to 8460 6,3 50 Self-tapping screws according to DIN 7500-1:2009-06
Metal anchors from different manufacturers 12 mm (or 16 mm according to structural requirement) in accordance with an ETA based on ETAG 001
HVP connector: Aluminium EN AW-6082 T651 according to EN 485 and EN AW-6005A T6 according to DIN EN 755,
geometric parameters according to Table 1
Table 1: HVP connectors; dimensions and number of screws
HVP No.
Width b[mm]
Height h[mm]
Screw diame-ter [mm]
Number of Screws elim[mm]
eM[mm]
eZ[mm]
e1,J[m]
e2,J[m]
e1,H[m]
e2,H[m]
Joist Header
n90,J n45,J n90,H n45,H
8045 25 45 4.5 1 1 2 0 11 - - 0,022 0,023
8075 25 75 4.5 1 3 3 0 14 - - 0,055 0,050
8160 45 60 5 6 1 7 0 15 - - 0,193 0,261 0,173 0,222
8211 55 110 5 8 6 11 0 18 40 - 0,370 0,676 0,360 0,757
8215 55 150 5 10 8 13 0 25 40 - 0,566 1,58 0,488 1,46
8315 75 150 5 10 9 15 0 25 60 - 0,675 1,33 0,676 1,50
8320 75 200 5 12 10 19 0 34 95 - 0,986 2,93 0,910 2,77
8420 120 200 8 3 4 4 4 82 - 330 0,319 1,28 0,564 0,978
8425 120 250 8 3 6 4 6 95 - 430 0,444 2,51 0,725 1,63
8430 120 300 8 3 8 4 8 113 - 530 0,610 4,47 0,930 2,56
8435 120 350 8 3 10 4 10 126 - 630 0,792 7,13 1,18 3,85
8440 120 400 8 3 12 4 12 145 - 730 1,01 10,8 1,47 5,54
8445 120 450 8 3 14 4 14 163 - 830 1,26 15,6 1,80 7,71
8450 120 500 8 3 16 4 16 181 - 930 1,54 21,6 2,17 10,4
8455 120 550 8 3 18 4 18 200 - 1030 1,85 29,0 2,58 13,7
8460 120 600 8 3 20 4 20 218 - 1130 2,91 37,9 3,04 17,7
www.pitzl.de/bemessungstool
-
Page 7
Pfostentrger Stecksystemgalvanisch verzinkt zinip beschichtet
*In Einschubrichtung mit Schrauben 8 x 180 mm Vollgewinde, Holz GL 28h**Andere Holzklassen oder Schraubenlngen knnen Sie aus unserem Statik-Buch, das Sie unter [email protected] anfordern knnen, entnehmen.
Wichtige Informationen:tem acesti omnis adis re pratior atus. Ga. TaepelXerferorum et, corrovit ventiis sunt et lam este dentium as aliqui to que reiciis as desequiatem rem quae. Nem. Namus a non rectem ut di alique solupid ellest, anducit facilla niatus quatur? Neseni sapedipsam aspedita nonseca eperiossit aut ex etur sita dolupta tistis et aut ipidestior assunt, quos
PitzlMetallbauGmbH & Co. KG
DIN18800
Design Manual connectors
For more information and technical details, downloads and helpful video tutorials: www.pitzl.de Alternatively, our competent staff are always available for advice:
+49 8703 9346-0 or via e-mail to [email protected]
3.2. Timber-to-timber connectionsLoading perpendicular to the connector plane
HVP connectors 8045 to 8320:
2
2
2 2
2
2
2 2
(1)
Loading in the direction of insertion for e2 elim
2
2
2 2
2
2
2 2
(3)
2
2
2 2
2
2
2 2
(4)
HVP connectors 8045 to 8320:
2
2
2 2
2
2
2 2
(5)
2
2
2 2
2
2
2 2
(6)
Loading in the direction of insertion for e2 > elim
(9)
(10)
Loading against the direction of insertion
(11)
HVP connectors 8420 to 8460:
2
2
2 2
2
2
2 2
(2)
HVP connectors 8420 to 8460:
(7)
(8)
The protection against lifting is ensured through a screw in the corresponding drilled hole.
Order with letter "A"
Example : "8211A"
-
Page 8
Fast, simple and precise: for the best result
PitzlMetallbauGmbH & Co. KG
DIN18800
Design Manual connectors
For more information and technical details, downloads and helpful video tutorials: www.pitzl.de Alternatively, our competent staff are always available for advice:
+49 8703 9346-0 or via e-mail to [email protected]
Loading perpendicular to the direction of insertion
(12)
Where:h Height of the connector plate Angle between screw axis and grain directionef,J Penetration depth of the threaded part of a joist screw ef,H Penetration depth of the threaded part of a header screwk,J Characteristic density of the joistk,H Characteristic density of the headern45,J Number of inclined screws in the joist plate of the HVP connector n45,H Number of inclined screws in the header plate of the HVP connector n90,J Number of screws perpendicular to the joist plate of the HVP connector n90,H Number of screws perpendicular to the header plate of the HVP connector Fla,J,Rk Lateral capacity of a joist screw,
Fla,H,Rk Lateral capacity of a header screw,
My,k Characteristic yield moment of a screwfh,k Characteristic embedding strength according to equation (8.15) of Eurocode 5d Outer thread diameter of a screwFax,,J,Rk Withdrawal capacity of an inclined joist screw,
Fax,,H,Rk Withdrawal capacity of an inclined header screw,
e2 Eccentricity of the force F2,Ed with regard to the joist end grain surfacee45 Eccentricity of the force F4,Ed with regard to the centre of the HVP connectorelim HVP connector dimension (see Table B.1)eM M2,Rk/F2,Rk (for types 8211 to 8320 see Table B.1)M2,Rk The lower characteristic moment capacity of the joist or header connection
Fax,Rk Withdrawal capacity of a moment screw arranged perpendicular to the connector plate (according to Eurocode 5 or corresponding European Technical Approval)
eZ HVP connector dimension (see Table 1)e1,J, e2,J, e1,H, e2,H HVP connector dimensions (see Table 1)
-
Page 9
Pfostentrger Stecksystemgalvanisch verzinkt zinip beschichtet
*In Einschubrichtung mit Schrauben 8 x 180 mm Vollgewinde, Holz GL 28h**Andere Holzklassen oder Schraubenlngen knnen Sie aus unserem Statik-Buch, das Sie unter [email protected] anfordern knnen, entnehmen.
Wichtige Informationen:tem acesti omnis adis re pratior atus. Ga. TaepelXerferorum et, corrovit ventiis sunt et lam este dentium as aliqui to que reiciis as desequiatem rem quae. Nem. Namus a non rectem ut di alique solupid ellest, anducit facilla niatus quatur? Neseni sapedipsam aspedita nonseca eperiossit aut ex etur sita dolupta tistis et aut ipidestior assunt, quos
PitzlMetallbauGmbH & Co. KG
DIN18800
Design Manual connectors
For more information and technical details, downloads and helpful video tutorials: www.pitzl.de Alternatively, our competent staff are always available for advice:
+49 8703 9346-0 or via e-mail to [email protected]
www.pitzl.de/video/verbinder/hvp-lehren
For combined loading of the HVP connector,the following condition should be fulfilled:
(13)
Where:F1,Ed Design load F1 (perpendicular to the connector plate)F1,Rd Design load-carrying capacity in loading case F1 (perpendicular to the connector plate)F2,Ed Design load F2 (in the direction of insertion)F2,Rd Design load-carrying capacity in loading case F2 (in the direction of insertion)F3,Ed Design load F3 (against the direction of insertion)F3,Rd Design load-carrying capacity in loading case F3 (against the direction of insertion)F4,Ed Design load F4 (perpendicular to the direction of insertion)F4,Rd Design load-carrying capacity in loading case F4 (perpendicular to the direction of insertion)3.3. Timber-to-concrete or timber-to-steel connections (HVP 8211B to 8460B)Loading in the direction of insertion
(14)
2
2
2 2
2
2
2 2
(15)
(16)
Where:n90,H Number of fasteners (metal anchors or screws), n90,H 2 Fla,H,Rk Lateral capacity of a header metal anchor or screwNB: The load-carrying capacity of concrete must be also verified.
Figure 1: Definition of e2 und e45
-
Page 10
Fast, simple and precise: for the best result
PitzlMetallbauGmbH & Co. KG
DIN18800
Design Manual connectors
For more information and technical details, downloads and helpful video tutorials: www.pitzl.de Alternatively, our competent staff are always available for advice:
+49 8703 9346-0 or via e-mail to [email protected]
If a fire resistance is required,the HVP connector plates shall be protected on all sides by timber or by a wood-based panel of the thickness afi:
in mm
Where:afi Required thickness of the timber or the wood-based
panel protection
n Design notional charring rate under standard fireexposure according to EN 1995-1-2treq Required time of fire resistance in min, treq 60 min
The laterally loaded screws of the HVP connectors should be designed according to section 6.3.2 of EN 1995-1-2 Eurocode 5 - Design of timber structures - Part 1-2: General - Structural fire design as protected connections with steel plates as side members.
The axially loaded screws should be designed according to section 6.4 of EN 1995-1-2 Eurocode 5 - Design of timber structures - Part 1-2: General - Structural fire design.
4. Resistance to fire
Fire tests at the Technical University Munich (TUM) 60 minutes
Header connector plate Joist connector plate
Joist connector plateHeader connector plate
HVP: Fire resistance up to 60min
-
Page 11
Pfostentrger Stecksystemgalvanisch verzinkt zinip beschichtet
*In Einschubrichtung mit Schrauben 8 x 180 mm Vollgewinde, Holz GL 28h**Andere Holzklassen oder Schraubenlngen knnen Sie aus unserem Statik-Buch, das Sie unter [email protected] anfordern knnen, entnehmen.
Wichtige Informationen:tem acesti omnis adis re pratior atus. Ga. TaepelXerferorum et, corrovit ventiis sunt et lam este dentium as aliqui to que reiciis as desequiatem rem quae. Nem. Namus a non rectem ut di alique solupid ellest, anducit facilla niatus quatur? Neseni sapedipsam aspedita nonseca eperiossit aut ex etur sita dolupta tistis et aut ipidestior assunt, quos
PitzlMetallbauGmbH & Co. KG
DIN18800
Design Manual connectors
For more information and technical details, downloads and helpful video tutorials: www.pitzl.de Alternatively, our competent staff are always available for advice:
+49 8703 9346-0 or via e-mail to [email protected]
In the following are given characteristic load-carrying capacities for a connection where the joist beam is horizontally and vertically perpen-dicular to the header beam for definite material combinations.
As fasteners are used full threaded Spax-screws made of carbon steel with countersunk head according to ETA-12/0114.
Their dimensions and the wood-based materials with them they are used are as below:
4,5 x 50 mm or 4.5 x 60 mm (HVP 8045 and 8075) 5 x 60 mm or 5 x 80 (or 70) mm (HVP 8160 to 8320) in timber elements classified C24 or GL24h
8 x 160 mm or 8 x 180 mm or 8 x 120 mm in timber elements classified GL24h or GL28h.
NB:
Tables of load-carrying capacity for screws from other manufacturers are available on demand.
Pitzl HVP connectors are designed for use in service classes 1 and 2
The load-carrying capacities are given for loads in the direction of insertion (F2),against the direction of insertion (F3) and perpendicu-lar to the direction of insertion (F4) as well as perpendicular to the connector plane (F1).
The force in the direction of insertion (F2),the force against the direc-tion of insertion (F3) and the force perpendicular to connector plane (F1) are supposed to act in the joist axis.
The torsion moment from the joist connection has to be taken into account for the design and the storage of the header.
If the HVP connector is connected to concrete or steel elements,the load-carrying capacity of the header metal anchors or screws shall be additionally verified (cf.Part 3.3).The connection to concrete or steel elements must be built with at least 2 fasteners in the upper holes.
The given load-carrying capacities are valid on the condition that all designed fasteners are built in.
Wood-based materials:
Solid timber classified C24 minimum according to EN 338:2010-02,
Glued laminated timber classified GL24h or GL28h minimum according to EN 1194:1999-05
Fasteners:
Spax full threaded screws 4.5 x 50mm (lef= 44mm) or 4.5 x 60mm (lef= 54mm) (according to ETA-12/0114)
Spax full threaded screws 5 x 60mm (lef= 54mm) or 5 x 80 or 70mm (lef= 61mm) (according to ETA-12/0114)
Spax full threaded screws 8 x 160mm (lef= 145mm) or 8 x 180mm (lef= 165mm) or 8 x 120mm (lef= 80mm) (nach ETA-12/0114)
The load-carrying capacity of the HVP connectors are given for the following combinations:
Combination 1: HVP 8045 to 8075: C24, 4.5 x 50 mm HVP 8160 to 8320: C24, 5 x 60 mm HVP 8420 to 8460: GL24h, 8 x 160 mm
Combination 2: HVP 8045 to 8075: GL24h, 4.5 x 50 mm HVP 8160 to 8320: GL24h, 5 x 60 mm HVP 8420 to 8460: GL28h, 8 x 160 mm
Combination 3: HVP 8045 to 8075: C24, 4.5 x 60 mm HVP 8160 to 8320: C24, 5 x 80 (or 70) mm HVP 8420 to 8460: GL24h, 8 x 180 mm
Combination 4: HVP 8045 to 8075: GL24h, 4.5 x 60 mm HVP 8160 to 8320: GL24h, 5 x 80 (or 70) mm HVP 8420 to 8460: GL28h, 8 x 180 mm
Combination 5: HVP 8420 to 8460: GL24h, 8 x 180 + 8 x 120 mm
Combination 6: HVP 8420 to 8460: GL28h, 8 x 180 + 8 x 120 mm
5. Tables of load-carrying capacity for Spax screws
5.1 Materials
5.2. Characteristic load-carrying capacities
-
Page 12
Fast, simple and precise: for the best result
PitzlMetallbauGmbH & Co. KG
DIN18800
Design Manual connectors
For more information and technical details, downloads and helpful video tutorials: www.pitzl.de Alternatively, our competent staff are always available for advice:
+49 8703 9346-0 or via e-mail to [email protected]
The eccentricities e2 and e45 for the determination of the load-carrying capacity in the direction of insertion (F2) and the load-carrying capa-city perpendicular to the direction of insertion (F4) are assumed as follows: e2 elim and e45= 0.If the force (F2) acts with an eccentricity e2 > elim,the load-carrying capacity is to calculate according to the formula (9) (cf.Part 3.2).
If the force (F4) does not act in the centre of the HVP connector (for example,for a front transom) with an eccentricity e2 > elim, the load-carrying capacity is to calculate according to the formula (12) (cf.Part 3.2).
For this the load-carrying capacities of the single screws according to Table 2 can be used.
The combinations 5 and 6 allow to reduce the minimal timber sec-tions (cf.Minimal timber sections).
The both upper inclined screws of the header plate and the both lower inclined screws of the joist plate are 120mm long.
Table 2: Combinations,load-carrying capacity of Spax screws
HVP-No. Combination Nr. Screws Material Characteristic load-carrying capacity of a screw
Joist Header
[mm] l [mm] Fla,J,Rk[N]
inclined screw Fax,J,Rk[N]
Fla,H,Rk[N]
When =90Fax,H,Rk[N]
8045-8075
1 4.5 50 C24 1251 3135 1977
2 4.5 50 GL24h 1303 3348 2060
3 4.5 60 C24 1251 3770 1977
4 4.5 60 GL24h 1303 4026 2060
8160-8320
1 5 60 C24 1488 4154 2353
2 5 60 GL24h 1551 4437 2452
3 5 80 C24 1488 4636 2353
4 5 80 GL24h 1551 4951 2452
8420-8460
1 8 160 GL24h 3367 13653 5324 15018
2 8 160 GL28h 3498 14508 5530 15959
3 8 180 GL24h 3367 15336 5324 16870
4 8 180 GL28h 3498 16297 5530 17927
5 8 180 GL24h 3367 15336 5324 16870
8 120 GL24h 3367 7089 5324 7798
6 8 180 GL28h 3498 16297 5530 17927
8 120 GL28h 3498 7533 5530 8286
-
Page 13
Pfostentrger Stecksystemgalvanisch verzinkt zinip beschichtet
*In Einschubrichtung mit Schrauben 8 x 180 mm Vollgewinde, Holz GL 28h**Andere Holzklassen oder Schraubenlngen knnen Sie aus unserem Statik-Buch, das Sie unter [email protected] anfordern knnen, entnehmen.
Wichtige Informationen:tem acesti omnis adis re pratior atus. Ga. TaepelXerferorum et, corrovit ventiis sunt et lam este dentium as aliqui to que reiciis as desequiatem rem quae. Nem. Namus a non rectem ut di alique solupid ellest, anducit facilla niatus quatur? Neseni sapedipsam aspedita nonseca eperiossit aut ex etur sita dolupta tistis et aut ipidestior assunt, quos
PitzlMetallbauGmbH & Co. KG
DIN18800
Design Manual connectors
For more information and technical details, downloads and helpful video tutorials: www.pitzl.de Alternatively, our competent staff are always available for advice:
+49 8703 9346-0 or via e-mail to [email protected]
Table 3: Combination 1 ( 4.5 x 50 / C24; 5 x 60 / C24 ; 8 x 160 / GL24h)
HVP No. Width b[mm]
Height h[mm]
Number and dimensions of screws Material F1,Rk[kN]
F2,Rk[kN]
F3,Rk[kN]
F4,Rk [kN]
[mm]Joist Header l [mm]
n90,J n45,J n90,H n45,H8045 25 45 4.5 1 1 2 0 50 C24 2,82 2,77 - 2,50
8075 25 75 4.5 1 3 3 0 50 C24 2,82 5,93 0,59 5,00
8160 45 60 5 6 1 7 0 60 C24 12,0 8,93 0,89 10,4
8211 55 110 5 8 6 11 0 60 C24 22,0 22,0 2,20 20,8
8215 55 150 5 10 8 13 0 60 C24 30,0 29,4 2,94 26,8
8315 75 150 5 10 9 15 0 60 C24 30,0 33,0 3,30 28,3
8320 75 200 5 12 10 19 0 60 C24 40,0 36,7 3,67 32,7
8420 120 200 8 3 4 4 4 160 GL24h 37,4 48,3 4,83 23,6
8425 120 250 8 3 6 4 6 160 GL24h 37,4 72,4 7,24 30,3
8430 120 300 8 3 8 4 8 160 GL24h 37,4 96,5 9,65 37,0
8435 120 350 8 3 10 4 10 160 GL24h 37,4 120,7 12,1 43,8
8440 120 400 8 3 12 4 12 160 GL24h 37,4 144,8 14,5 50,5
8445 120 450 8 3 14 4 14 160 GL24h 37,4 168,9 16,9 57,2
8450 120 500 8 3 16 4 16 160 GL24h 37,4 193,1 19,3 64,0
8455 120 550 8 3 18 4 18 160 GL24h 37,4 217,2 21,7 70,7
8460 120 600 8 3 20 4 20 160 GL24h 37,4 241,3 24,1 77,4
Table 4: Combination 2 ( 4.5 x 50 / GL24h; 5 x 60 / GL24h ; 8 x 160 / GL28h)
HVP Nr. Width b[mm]
Height h[mm]
Number and dimensions of screws Material F1,Rk[kN]
F2,Rk[kN]
F3,Rk[kN]
F4,Rk [kN]
[mm]Joist Header l [mm]
n90,J n45,J n90,H n45,H8045 25 45 4.5 1 1 2 0 50 GL24h 3,01 2,96 - 2,61
8075 25 75 4.5 1 3 3 0 50 GL24h 3,01 6,18 0,62 5,21
8160 45 60 5 6 1 7 0 60 GL24h 12,0 9,30 0,93 10,9
8211 55 110 5 8 6 11 0 60 GL24h 22,0 23,5 2,35 21,7
8215 55 150 5 10 8 13 0 60 GL24h 30,0 31,4 3,14 27,9
8315 75 150 5 10 9 15 0 60 GL24h 30,0 35,3 3,53 29,5
8320 75 200 5 12 10 19 0 60 GL24h 40,0 39,2 3,92 34,1
8420 120 200 8 3 4 4 4 160 GL28h 39,8 51,3 5,13 24,5
8425 120 250 8 3 6 4 6 160 GL28h 39,8 76,9 7,69 31,5
8430 120 300 8 3 8 4 8 160 GL28h 39,8 102,6 10,3 38,5
8435 120 350 8 3 10 4 10 160 GL28h 39,8 128,2 12,8 45,5
8440 120 400 8 3 12 4 12 160 GL28h 39,8 153,9 15,4 52,5
8445 120 450 8 3 14 4 14 160 GL28h 39,8 179,5 18,0 59,5
8450 120 500 8 3 16 4 16 160 GL28h 39,8 205,2 20,5 66,5
8455 120 550 8 3 18 4 18 160 GL28h 39,8 230,8 23,1 73,5
8460 120 600 8 3 20 4 20 160 GL28h 39,8 256,5 25,6 80,5
-
Page 14
Fast, simple and precise: for the best result
PitzlMetallbauGmbH & Co. KG
DIN18800
Design Manual connectors
For more information and technical details, downloads and helpful video tutorials: www.pitzl.de Alternatively, our competent staff are always available for advice:
+49 8703 9346-0 or via e-mail to [email protected]
Table 5: Combination 3 ( 4.5 x 60 / C24; 5 x 80 / C24 ; 8 x 180 / GL24h)
HVP No. Width b[mm]
Height h[mm]
Number and dimensions of screws Material F1,Rk[kN]
F2,Rk[kN]
F3,Rk[kN]
F4,Rk [kN]
[mm]Joist Header l [mm]
n90,J n45,J n90,H n45,H8045 25 45 4.5 1 1 2 0 60 C24 3,43 3,33 - 2,50
8075 25 75 4.5 1 3 3 0 60 C24 3,43 5,93 0,59 5,00
8160 45 60 5 6 1 7 0 80 C24 12,0 8,93 0,89 10,4
8211 55 110 5 8 6 11 0 80 C24 22,0 24,6 2,46 20,8
8215 55 150 5 10 8 13 0 80 C24 30,0 30,6 3,06 26,8
8315 75 150 5 10 9 15 0 80 C24 30,0 35,3 3,53 28,3
8320 75 200 5 12 10 19 0 80 C24 40,0 41,0 4,10 32,7
8420 120 200 8 3 4 4 4 180 GL24h 42,1 54,2 5,42 23,6
8425 120 250 8 3 6 4 6 180 GL24h 42,1 81,3 8,13 30,3
8430 120 300 8 3 8 4 8 180 GL24h 42,1 108,4 10,8 37,0
8435 120 350 8 3 10 4 10 180 GL24h 42,1 135,6 13,6 43,8
8440 120 400 8 3 12 4 12 180 GL24h 42,1 162,7 16,3 50,5
8445 120 450 8 3 14 4 14 180 GL24h 42,1 189,8 19,0 57,2
8450 120 500 8 3 16 4 16 180 GL24h 42,1 216,9 21,7 64,0
8455 120 550 8 3 18 4 18 180 GL24h 42,1 244,0 24,4 70,7
8460 120 600 8 3 20 4 20 180 GL24h 42,1 271,1 27,1 77,4
NB: 70mm Spax screws with lef= 61mm (such as 80mm Spax screws) can be as well used without diminution of the load-carrying capacity.
Tabelle 6: Kombination 4 ( 4.5 x 60 / GL24h; 5 x 80 / GL24h ; 8 x 180 / GL28h)
HVP No. Width b[mm]
Height h[mm]
Number and dimensions of screws Material F1,Rk[kN]
F2,Rk[kN]
F3,Rk[kN]
F4,Rk [kN]
[mm]Joist Header l [mm]
n90,J n45,J n90,H n45,H8045 25 45 4.5 1 1 2 0 60 GL24h 3,66 3,56 - 2,61
8075 25 75 4.5 1 3 3 0 60 GL24h 3,66 6,18 0,62 5,21
8160 45 60 5 6 1 7 0 80 GL24h 12,0 9,30 0,93 10,9
8211 55 110 5 8 6 11 0 80 GL24h 22,0 26,3 2,63 21,7
8215 55 150 5 10 8 13 0 80 GL24h 30,0 31,9 3,19 27,9
8315 75 150 5 10 9 15 0 80 GL24h 30,0 36,8 3,68 29,5
8320 75 200 5 12 10 19 0 80 GL24h 40,0 43,8 4,38 34,1
8420 120 200 8 3 4 4 4 180 GL28h 44,7 57,6 5,76 24,5
8425 120 250 8 3 6 4 6 180 GL28h 44,7 86,4 8,64 31,5
8430 120 300 8 3 8 4 8 180 GL28h 44,7 115,2 11,5 38,5
8435 120 350 8 3 10 4 10 180 GL28h 44,7 144,1 14,4 45,5
8440 120 400 8 3 12 4 12 180 GL28h 44,7 172,9 17,3 52,5
8445 120 450 8 3 14 4 14 180 GL28h 44,7 201,7 20,2 59,5
8450 120 500 8 3 16 4 16 180 GL28h 44,7 230,5 23,0 66,5
8455 120 550 8 3 18 4 18 180 GL28h 44,7 259,3 25,9 73,5
8460 120 600 8 3 20 4 20 180 GL28h 44,7 288,1 28,8 80,5
NB: 70mm Spax screws with lef= 61mm (such as 80mm Spax screws) can be as well used without diminution of the load-carrying capacity.
-
Page 15
Pfostentrger Stecksystemgalvanisch verzinkt zinip beschichtet
*In Einschubrichtung mit Schrauben 8 x 180 mm Vollgewinde, Holz GL 28h**Andere Holzklassen oder Schraubenlngen knnen Sie aus unserem Statik-Buch, das Sie unter [email protected] anfordern knnen, entnehmen.
Wichtige Informationen:tem acesti omnis adis re pratior atus. Ga. TaepelXerferorum et, corrovit ventiis sunt et lam este dentium as aliqui to que reiciis as desequiatem rem quae. Nem. Namus a non rectem ut di alique solupid ellest, anducit facilla niatus quatur? Neseni sapedipsam aspedita nonseca eperiossit aut ex etur sita dolupta tistis et aut ipidestior assunt, quos
PitzlMetallbauGmbH & Co. KG
DIN18800
Design Manual connectors
For more information and technical details, downloads and helpful video tutorials: www.pitzl.de Alternatively, our competent staff are always available for advice:
+49 8703 9346-0 or via e-mail to [email protected]
Table 7: Combination 5 ( 8 x 180 + 8 x 120 / GL24h)
HVP No. Width b[mm]
Height h[mm]
Number and dimensions of screws Material F1,Rk[kN]
F2,Rk[kN]
F3,Rk[kN]
F4,Rk [kN]
[mm]Joist Header l [mm]
n90,J n45,J n90,H n45,H8420 120 200 8 3 4 4 4 180/120 GL24h 42,1 39,6 3,96 23,6
8425 120 250 8 3 6 4 6 180/120 GL24h 42,1 66,8 6,68 30,3
8430 120 300 8 3 8 4 8 180/120 GL24h 42,1 93,9 9,39 37,0
8435 120 350 8 3 10 4 10 180/120 GL24h 42,1 121,0 12,1 43,8
8440 120 400 8 3 12 4 12 180/120 GL24h 42,1 148,1 14,8 50,5
8445 120 450 8 3 14 4 14 180/120 GL24h 42,1 175,2 17,5 57,2
8450 120 500 8 3 16 4 16 180/120 GL24h 42,1 202,3 20,2 64,0
8455 120 550 8 3 18 4 18 180/120 GL24h 42,1 229,4 22,9 70,7
8460 120 600 8 3 20 4 20 180/120 GL24h 42,1 256,5 25,7 77,4
Table 8: Combination 6 ( 8 x 180 + 8 x 120 / GL28h)
HVP No. Width b[mm]
Height h[mm]
Number and dimensions of screws Material F1,Rk[kN]
F2,Rk[kN]
F3,Rk[kN]
F4,Rk [kN]
[mm]Joist Header l [mm]
n90,J n45,J n90,H n45,H8420 120 200 8 3 4 4 4 180/120 GL28h 44,7 42,1 4,21 24,5
8425 120 250 8 3 6 4 6 180/120 GL28h 44,7 70,9 7,09 31,5
8430 120 300 8 3 8 4 8 180/120 GL28h 44,7 99,7 10,0 38,5
8435 120 350 8 3 10 4 10 180/120 GL28h 44,7 128,6 12,9 45,5
8440 120 400 8 3 12 4 12 180/120 GL28h 44,7 157,4 15,7 52,5
8445 120 450 8 3 14 4 14 180/120 GL28h 44,7 186,2 18,6 59,5
8450 120 500 8 3 16 4 16 180/120 GL28h 44,7 215,0 21,5 66,5
8455 120 550 8 3 18 4 18 180/120 GL28h 44,7 243,8 24,4 73,5
8460 120 600 8 3 20 4 20 180/120 GL28h 44,7 272,6 27,3 80,5
-
Page 16
PitzlMetallbauGmbH & Co. KG
DIN18800
Design Manual connectors
For more information and technical details, downloads and helpful video tutorials: www.pitzl.de Alternatively, our competent staff are always available for advice:
+49 8703 9346-0 or via e-mail to [email protected]
Fast, simple and precise: for the best result
6. Timber dimensions6.1. Minimal timber dimensions and distances to the edgesJoist horizontally and vertically perpendicular to header:
In the following the minimal timber dimensions and distances to the edges are given for a connection with Spax screws of different lengths where the joist is horizontally and vertically perpendicular to the header.
The minimal timber dimensions and distances to the edges are valid for the HVP connectors 8045 to 8320 for a loading in the direction of insertion (F2).
For the HVP connectors high loads (8420 to 8460) they are valid for the loadings: in the direction of insertion (F2) and perpendicular to connector plane (F1).
For other loadings and connection geometries the indications of the screws manufacturer and of the page 23 must be respected.
-
Page 17
Pfostentrger Stecksystemgalvanisch verzinkt zinip beschichtet
*In Einschubrichtung mit Schrauben 8 x 180 mm Vollgewinde, Holz GL 28h**Andere Holzklassen oder Schraubenlngen knnen Sie aus unserem Statik-Buch, das Sie unter [email protected] anfordern knnen, entnehmen.
Wichtige Informationen:tem acesti omnis adis re pratior atus. Ga. TaepelXerferorum et, corrovit ventiis sunt et lam este dentium as aliqui to que reiciis as desequiatem rem quae. Nem. Namus a non rectem ut di alique solupid ellest, anducit facilla niatus quatur? Neseni sapedipsam aspedita nonseca eperiossit aut ex etur sita dolupta tistis et aut ipidestior assunt, quos
PitzlMetallbauGmbH & Co. KG
DIN18800
Design Manual connectors
For more information and technical details, downloads and helpful video tutorials: www.pitzl.de Alternatively, our competent staff are always available for advice:
+49 8703 9346-0 or via e-mail to [email protected]
Art. No. Connector Header beam (mm) Joist (mm) Minimal total timber height: E (mm)
Minimal timber dimensions
Minimal distance to the edges
Minimal timber dimensions
Minimal timber dimensions
Width(mm)
Height(mm)
HWidth
HHeight
Lateral Up:A
Down:B
JWidth
JHeight
Lateral Up:C
Down:D
8045 25 45 60 60 42 4 11 50 80 10 0 30 80
8075 25 75 60 90 42 5 10 50 110 10 0 35 120
8160 45 60 60 100 55 5 30 70 90 10 5 25 100
8211 55 110 60 140 55 4 26 100 150 20* 10 25 150
8215 55 150 60 180 55 3 27 100 190 20* 10 25 190
8315 75 150 60 180 55 4 26 120 180 20* 10 20 190
8320 75 200 60 230 55 3 27 120 230 20* 10 15 240
* For a loading in the direction of insertion (F2) with e2
-
Page 18
Fast, simple and precise: for the best result
PitzlMetallbauGmbH & Co. KG
DIN18800
Design Manual connectors
For more information and technical details, downloads and helpful video tutorials: www.pitzl.de Alternatively, our competent staff are always available for advice:
+49 8703 9346-0 or via e-mail to [email protected]
Art. No. Connector Header beam (mm) Joist (mm) Minimal total timber height: E (mm)
Minimal timber dimensions
Minimal distance to the edges
Minimal timber dimensions
Minimal timber dimensions
Width(mm)
Height(mm)
HWidth
HHeight
Lateral Up:A
Down:B
JWidth
JHeight
Lateral Up:C
Down:D
8045 25 45 70 60 42 4 11 50 90 10 0 40 90
8075 25 75 70 90 42 5 10 50 120 10 0 40 120
8160 45 60 80 100 55 5 30 70 90 10 5 25 100
8211 55 110 80 140 55 4 26 100 160 20* 10 40 160
8215 55 150 80 180 55 3 27 100 200 20* 10 40 200
8315 75 150 80 180 55 4 26 120 200 20* 10 35 200
8320 75 200 80 230 55 3 27 120 240 20* 10 25 240
* For a loading in the direction of insertion (F2) with e2
-
Page 19
HVP-Verbinder
Pfostentrger Stecksystemgalvanisch verzinkt zinip beschichtet
Wichtige Informationen:tem acesti omnis adis re pratior atus. Ga. TaepelXerferorum et, corrovit ventiis sunt et lam este dentium as aliqui to que reiciis as desequiatem rem quae. Nem. Namus a non rectem ut di alique solupid ellest, anducit facilla niatus quatur? Neseni sapedipsam aspedita nonseca eperiossit aut ex etur sita dolupta tistis et aut ipidestior assunt, quos
PitzlMetallbauGmbH & Co. KG
DIN18800
Design Manual connectors
For more information and technical details, downloads and helpful video tutorials: www.pitzl.de Alternatively, our competent staff are always available for advice:
+49 8703 9346-0 or via e-mail to [email protected]
HVP connectors 8420 to 8460
Screws length : 160mm ( 8 mm)
Art. No. Connector Header beam (mm) Joist (mm) Minimal total timber height: E (mm)
Minimal timber dimensions
Minimal distance to the edges
Minimal timber dimensions
Minimal timber dimensions
Width(mm)
Height(mm)
HWidth
HHeight
Lateral Up:A
Down:B
JWidth
JHeight
Lateral Up:C
Down:D
8420 120 200 160 270 30 60 9 120 270 10 20 50 310
8425 120 250 160 320 30 61 9 120 320 10 20 50 370
8430 120 300 160 380 30 65 9 120 370 10 20 45 410
8435 120 350 160 430 30 70 9 120 420 10 20 45 470
8440 120 400 160 480 30 70 9 120 460 10 20 40 510
8445 120 450 160 530 30 71 9 120 510 10 20 35 560
8450 120 500 160 590 30 75 9 120 550 10 20 30 610
8455 120 550 160 640 30 80 9 120 600 10 20 25 660
8460 120 600 160 690 30 80 9 120 640 10 20 20 700
Art. No. Connector Column (mm)
Minimal timber dimensions
Minimal distance to the edges
Width(mm)
Height(mm)
CWidth
CHeight
Lateral Up:A
Down:B
8420 120 200 160 150 15 60 -
8425 120 250 160 150 15 61 -
8430 120 300 160 150 15 65 -
8435 120 350 160 150 15 70 -
8440 120 400 160 150 15 70 -
8445 120 450 160 150 15 71 -
8450 120 500 160 150 15 80 -
8455 120 550 160 150 15 80 -
8460 120 600 160 150 15 80 -
NB:
The screws perpendicular to the connector plane (and also the header width) can be reduce to the following value: 120mm
-
Page 20
Fast, simple and precise: for the best result
PitzlMetallbauGmbH & Co. KG
DIN18800
Design Manual connectors
For more information and technical details, downloads and helpful video tutorials: www.pitzl.de Alternatively, our competent staff are always available for advice:
+49 8703 9346-0 or via e-mail to [email protected]
HVP connectors 8420 to 8460
Screws length : 180mm
Art. No. Connector Header beam (mm) Joist (mm) Minimal total timber height: E (mm)
Minimal timber dimensions
Minimal distance to the edges
Minimal timber dimensions
Minimal timber dimensions
Width(mm)
Height(mm)
HWidth
HHeight
Lateral Up:A
Down:B
JWidth
JHeight
Lateral Up:C
Down:D
8420 120 200 180 290 30 75 9 120 280 10 20 60 340
8425 120 250 180 340 30 75 9 120 330 10 20 60 390
8430 120 300 180 390 30 80 9 120 380 10 20 55 440
8435 120 350 180 440 30 80 9 120 430 10 20 55 490
8440 120 400 180 500 30 85 9 120 470 10 20 50 540
8445 120 450 180 550 30 85 9 120 520 10 20 45 580
8450 120 500 180 600 30 90 9 120 560 10 20 40 630
8455 120 550 180 650 30 90 9 120 610 10 20 35 680
8460 120 600 180 710 30 95 9 120 650 10 20 30 730
Art. No. Connector Column (mm)
Minimal timber dimensions
Minimal distance to the edges
Width(mm)
Height(mm)
CWidth
CHeight
Lateral Up:A
Down:B
8420 120 200 180 150 15 75 -
8425 120 250 180 150 15 75 -
8430 120 300 180 150 15 80 -
8435 120 350 180 150 15 80 -
8440 120 400 180 150 15 85 -
8445 120 450 180 150 15 85 -
8450 120 500 180 150 15 90 -
8455 120 550 180 150 15 90 -
8460 120 600 180 150 15 95 -
NB:
The screws perpendicular to the connector plane (and also the header width) can be reduce to the following value : 120mm
-
Page 21
HVP-Verbinder
Pfostentrger Stecksystemgalvanisch verzinkt zinip beschichtet
Wichtige Informationen:tem acesti omnis adis re pratior atus. Ga. TaepelXerferorum et, corrovit ventiis sunt et lam este dentium as aliqui to que reiciis as desequiatem rem quae. Nem. Namus a non rectem ut di alique solupid ellest, anducit facilla niatus quatur? Neseni sapedipsam aspedita nonseca eperiossit aut ex etur sita dolupta tistis et aut ipidestior assunt, quos
PitzlMetallbauGmbH & Co. KG
DIN18800
Design Manual connectors
For more information and technical details, downloads and helpful video tutorials: www.pitzl.de Alternatively, our competent staff are always available for advice:
+49 8703 9346-0 or via e-mail to [email protected]
HVP connectors 8420 to 8460
Screws length: 180 mm + 2x120 mm ( 8 mm)
in the header (upper part) and in the joist (lower part)
Art. No. Connector Header beam (mm) Joist (mm) Minimal total timber height: E (mm)
Minimal timber dimensions
Minimal distance to the edges
Minimal timber dimensions
Minimal timber dimensions
Width(mm)
Height(mm)
HWidth
HHeight
Lateral Up:A
Down:B
JWidth
JHeight
Lateral Up:C
Down:D
8420 120 200 180 240 30 31 9 140 240 10 20 20 260
8425 120 250 180 300 30 35 9 140 290 10 20 20 310
8430 120 300 180 350 30 40 9 140 340 10 20 15 360
8435 120 350 180 400 30 40 9 140 390 10 20 15 410
8440 120 400 180 450 30 41 9 140 430 10 20 10 460
8445 120 450 180 510 30 45 9 140 480 10 20 5 510
8450 120 500 180 560 30 50 9 140 520 10 20 0 560
8455 120 550 180 610 30 50 9 140 570 10 20 0 610
8460 120 600 180 660 30 51 9 140 620 10 20 0 660
Art. No. Connector Column (mm)
Minimal timber dimensions
Minimal distance to the edges
Width(mm)
Height(mm)
CWidth
CHeight
Lateral Up:A
Down:B
8420 120 200 180 150 15 31 -
8425 120 250 180 150 15 35 -
8430 120 300 180 150 15 40 -
8435 120 350 180 150 15 40 -
8440 120 400 180 150 15 41 -
8445 120 450 180 150 15 45 -
8450 120 500 180 150 15 50 -
8455 120 550 180 150 15 50 -
8460 120 600 180 150 15 51 -
NB:
The screws perpendicular to the connector plane (and also the header width) can be reduce to the following value : 120mm
-
Page 22
Fast, simple and precise: for the best result
PitzlMetallbauGmbH & Co. KG
DIN18800
Design Manual connectors
For more information and technical details, downloads and helpful video tutorials: www.pitzl.de Alternatively, our competent staff are always available for advice:
+49 8703 9346-0 or via e-mail to [email protected]
Other connection geometries:For other connection geometries the following indications must be respected.
25 < 155or 0 or 180
Top viewElevation
(Eccentricity between the center connector
and secondary beam axis)
35 < 145or 0 or 180
-
Page 23
HVP-Verbinder
Pfostentrger Stecksystemgalvanisch verzinkt zinip beschichtet
Wichtige Informationen:tem acesti omnis adis re pratior atus. Ga. TaepelXerferorum et, corrovit ventiis sunt et lam este dentium as aliqui to que reiciis as desequiatem rem quae. Nem. Namus a non rectem ut di alique solupid ellest, anducit facilla niatus quatur? Neseni sapedipsam aspedita nonseca eperiossit aut ex etur sita dolupta tistis et aut ipidestior assunt, quos
PitzlMetallbauGmbH & Co. KG
DIN18800
Design Manual connectors
For more information and technical details, downloads and helpful video tutorials: www.pitzl.de Alternatively, our competent staff are always available for advice:
+49 8703 9346-0 or via e-mail to [email protected]
The design of the connections shall be in accordance with Eurocode 5 or a similar national Timber Code.
For softwoods,the characteristic splitting capacity should be taken as:
according toEN 1995-1-1:2010-12
and:
F90,Rk is the characteristic splitting capacity,in N
w is a modification factor; (w = 1 for the HVP connectors)
he s the loaded edge distance to the centre of the most distant fastener,in mm;
h is the timber member height,in mm;
b is the member thickness,in mm;
The value of he can be determinated as following:In header:
he = hv + distance between the connector plate and the lower edge
In joist:
he = hv + distance between the connector plate and the upper edge
6.2. Splitting capacity
-
Page 24
Fast, simple and precise: for the best result
PitzlMetallbauGmbH & Co. KG
DIN18800
Design Manual connectors
For more information and technical details, downloads and helpful video tutorials: www.pitzl.de Alternatively, our competent staff are always available for advice:
+49 8703 9346-0 or via e-mail to [email protected]
HVP connectors 8045 to 8320
HVP 8160 to 8320Screws length
60 mm 70 mm 80 mm
HVP No. Header Joist Header Joist Header Joist
8160 50 50 50 50 50 50
8211 99 103 99 106 99 110
8215 137 142 137 145 137 149
8315 139 139 139 142 139 146
8320 188 181 188 184 188 188
Value of hv in mm:
HVP 8045 and 8075Screws length
50 mm 60 mm
HVP No. Header Joist Header Joist
8045 35 47 35 51
8075 65 79 65 83
HT NT
HT
NT
he
he
hv
Fv,Ed
Fv,Ed
hvh
h
-
Page 25
HVP-Verbinder
Pfostentrger Stecksystemgalvanisch verzinkt zinip beschichtet
Wichtige Informationen:tem acesti omnis adis re pratior atus. Ga. TaepelXerferorum et, corrovit ventiis sunt et lam este dentium as aliqui to que reiciis as desequiatem rem quae. Nem. Namus a non rectem ut di alique solupid ellest, anducit facilla niatus quatur? Neseni sapedipsam aspedita nonseca eperiossit aut ex etur sita dolupta tistis et aut ipidestior assunt, quos
PitzlMetallbauGmbH & Co. KG
DIN18800
Design Manual connectors
For more information and technical details, downloads and helpful video tutorials: www.pitzl.de Alternatively, our competent staff are always available for advice:
+49 8703 9346-0 or via e-mail to [email protected]
Value of hv in mm:
HVP 8420 to 8460Screws length
160 mm 180 mm 180 mm + 2 x 120 mm
HVP No. Header Joist Header Joist Header Joist
8420 192 179 199 187 178 165
8425 244 229 252 237 230 215
8430 297 274 304 282 283 260
8435 349 324 357 332 335 310
8440 402 369 409 377 388 355
8445 454 414 462 422 440 400
8450 507 459 514 467 493 445
8455 559 504 567 512 545 490
8460 612 549 619 557 598 535
HVP connectors 8420 to 8460
HT
NT
he hv
Fv,Ed
h
hehvh
Fv,Ed
-
Page 26
Fast, simple and precise: for the best result
PitzlMetallbauGmbH & Co. KG
DIN18800
Design Manual connectors
For more information and technical details, downloads and helpful video tutorials: www.pitzl.de Alternatively, our competent staff are always available for advice:
+49 8703 9346-0 or via e-mail to [email protected]
7. Connections to concreteThe load-carrying capacity of the concrete part (anchors and concrete) and the distance between the anchors and the edges must be calcula-ted according to the corresponding current standards.
Fasteners of the concrete part per HVP connector:HVP 8211B to 8320B:
4 x 12 mm high performance anchors with countersunk head,for example Fischer FH II 12/15 SKHVP 8420B to 8440B:
4 x internal threaded anchors M12,for example Fischer RG 18 x 125 M 12 I
4 x screws with countersunk head M 12,steel quality 8.8 (inclusive in the delivery content)HVP 8445B to 8460B:
6 x internal threaded anchors with M12 (or M16 according to static requirement),for example Fischer RG 18 x 125 M 12 I
6 x screws with countersunk head M12 (or M16 according to static requirement),steel quality 8.8 (inclusive in the delivery content)
The header-plates of HVP 8445 to 8460 comprise injection drilled holes in order to fill the gap between the screws and the connector-plate and thus ensure an equal and simultaneous loading transmission of all screws and screw anchors.
NB:
HVP 8425B, 8435B, 8445B, 8450B, 8455B und 8460B are no carry articles.
Construction:
The construction instructions of the anchors manufacturer must be observed.
The anchors with internal screw thread can be fixed either with boreholes in the concrete wall and injection mortar or by embedded anchor plates in concrete.
Anchor plates with welded internal threaded anchors ensure a precise and quick fixation of the HVP connectors.
By the way the distances to the concrete edges can be reduced.
These anchor plates will be manufactured according to your requirement (structural engineering calculation).
-
Page 27
Pfostentrger Stecksystemgalvanisch verzinkt zinip beschichtet
*In Einschubrichtung mit Schrauben 8 x 180 mm Vollgewinde, Holz GL 28h**Andere Holzklassen oder Schraubenlngen knnen Sie aus unserem Statik-Buch, das Sie unter [email protected] anfordern knnen, entnehmen.
Wichtige Informationen:tem acesti omnis adis re pratior atus. Ga. TaepelXerferorum et, corrovit ventiis sunt et lam este dentium as aliqui to que reiciis as desequiatem rem quae. Nem. Namus a non rectem ut di alique solupid ellest, anducit facilla niatus quatur? Neseni sapedipsam aspedita nonseca eperiossit aut ex etur sita dolupta tistis et aut ipidestior assunt, quos
Design Manual connectors
For more information and technical details, downloads and helpful video tutorials: www.pitzl.de Alternatively, our competent staff are always available for advice:
+49 8703 9346-0 or via e-mail to [email protected]
PitzlMetallbauGmbH & Co. KG
DIN18800
B/ Post-purlin connectors1. Characteristics European Technical Approval: ETA-10/0413 Material:
Timber: Solid timber from softwood classified C24 minimum according to EN 338:2010-02,
Fasteners: Wood screws with countersunk head 10 x min.120mm (Thread length > 100 mm) according to EN 14592 or with ETA; Threaded rod
Steel quality of the connectors: Steel grade S235JR according to EN 10025-2:2005-04 ReH > 235 N/mm, Rm > 360 N/mm
Technical information of the post-purlin connectors
Post-purlin connectors Metal Fasteners Post [mm] Purlin [mm]
Type Dimension Art.-No. Screws Threaded rod min b/h min b/h
8710 M10 8710 4x F 10x120mm M10 4.8+ washer 58 mm
120/120 120/90
8712 M12 8712 4x F 10x120mm M12 4.8+ washer 58 mm
120/120 120/90
8716 M16 8716 4x F 10x120mm M16 4.8+ washer 68 mm
120/120 120/90
* F = full-thread wood screw
Metal fasteners:
- 4 full-thread wood screws with countersunk head 10 x min.120mm (thread length: min.100mm)
-Threaded rod: M10,M12 oder M16 according to post-purlin connector
Combined forces:
If a vertical force F (compression or tension) and horizontal forces H act at the same time,the following inequality shall be fulfilled:
Where:
EF,d Design value of stress in the load cases F (compression) or F (tension) in N
RF,d Design value of load-carrying capacity in the load cases F (compression) or F (tension) in N
EH,d Design value of stress in the load cases H1 or H2 in N
RH,d Design value of load-carrying capacity in the load cases H1 or H2 in N
Increase of the tension load-carrying capacity:
The load-carrying capacity of the fasteners in timber was calculated for screws with a thread length of 100mm.
By use of screws with longer thread lengths the tension load-carrying capacity can be calculated with the following equation:
and
with:
RFd, (Tension) Design value of the load-carrying capacity in the load case F (Tension) for the thread length lef in kN
lef effective thread length of the screws in mm
Rd,(Tension),steel failure Design value of the load-carrying capacity due to steel failure in kN
-
Page 28
Fast, simple and precise: for the best resultDesign Manual connectors
For more information and technical details, downloads and helpful video tutorials: www.pitzl.de Alternatively, our competent staff are always available for advice:
+49 8703 9346-0 or via e-mail to [email protected]
PitzlMetallbauGmbH & Co. KG
DIN18800
Application example
2. Design load-carrying capacityPost-purlin connectors 8710,8712 and 8716:
Design values of the load-carrying capacity in kN per connector
Load direction Type Load-duration class, kmodPermanent 0,6 Long 0,7 Medium 0,8 Short 0,9 Instantaneous 1,1
Fd (compression) all types To calculate according to EC5
Fd (tension) all types - 11,3 13,8
H1,d(parallel to the purlin)
all types 3,4 3,9 4,5 5,1 6,2
H2,d(perpendicular to the purlin)
8710 2,9 3,4 3,9 4,4 5,3
8712like H1,d8716
Timber or fasteners failure:
In service class 3 (outdoors) the values of the table must be reduced in relationship to the modification coefficient to apply kmodFd (Tension) in service class 3, load-duration class short: Fd = 11,3 x 0,7/0,9
-
Page 29
Pfostentrger Stecksystemgalvanisch verzinkt zinip beschichtet
*In Einschubrichtung mit Schrauben 8 x 180 mm Vollgewinde, Holz GL 28h**Andere Holzklassen oder Schraubenlngen knnen Sie aus unserem Statik-Buch, das Sie unter [email protected] anfordern knnen, entnehmen.
Wichtige Informationen:tem acesti omnis adis re pratior atus. Ga. TaepelXerferorum et, corrovit ventiis sunt et lam este dentium as aliqui to que reiciis as desequiatem rem quae. Nem. Namus a non rectem ut di alique solupid ellest, anducit facilla niatus quatur? Neseni sapedipsam aspedita nonseca eperiossit aut ex etur sita dolupta tistis et aut ipidestior assunt, quos
Design Manual connectors
For more information and technical details, downloads and helpful video tutorials: www.pitzl.de Alternatively, our competent staff are always available for advice:
+49 8703 9346-0 or via e-mail to [email protected]
PitzlMetallbauGmbH & Co. KG
DIN18800
3. Characteristic load-carrying capacityPost-purlin connector F1 (Compression) F1 (Tension) F2/F3 F4/F5Type Art.No. Timber Steel Timber Steel Timber Steel Timber Steel
8710 8710 To calculate according to EC5
- 16,3 16,7 - 7,3 - - 6,3 - -
- m(C) m,0 - m - - m(C) - -
8712 8712 To calculate according to EC5
- 16,3 - - 7,3 - - 7,3 - -
- m(C) - - m - - m - -
8716 8716 To calculate according to EC5
- 16,3 - - 7,3 - - 7,3 - -
- m(C) - - m - - m - -
-
Page 30
Fast, simple and precise: for the best resultDesign Manual connectors
For more information and technical details, downloads and helpful video tutorials: www.pitzl.de Alternatively, our competent staff are always available for advice:
+49 8703 9346-0 or via e-mail to [email protected]
PitzlMetallbauGmbH & Co. KG
DIN18800
Notes, drafts, reminders
Pitzl GmbH & Co. KG, Siemensstrae 26, DE-84051 AltheimTel.: +49 08703 9346-0, Telefax: +49 08703 9346-55, Infos, Downloads, technische Informationen und hilfreiche Montagevideos: www.pitzl.de
PitzlMetallbauGmbH & Co. KG
DIN18800
Date
-
Page 31
Pfostentrger Stecksystemgalvanisch verzinkt zinip beschichtet
*In Einschubrichtung mit Schrauben 8 x 180 mm Vollgewinde, Holz GL 28h**Andere Holzklassen oder Schraubenlngen knnen Sie aus unserem Statik-Buch, das Sie unter [email protected] anfordern knnen, entnehmen.
Wichtige Informationen:tem acesti omnis adis re pratior atus. Ga. TaepelXerferorum et, corrovit ventiis sunt et lam este dentium as aliqui to que reiciis as desequiatem rem quae. Nem. Namus a non rectem ut di alique solupid ellest, anducit facilla niatus quatur? Neseni sapedipsam aspedita nonseca eperiossit aut ex etur sita dolupta tistis et aut ipidestior assunt, quos
Design Manual connectors
For more information and technical details, downloads and helpful video tutorials: www.pitzl.de Alternatively, our competent staff are always available for advice:
+49 8703 9346-0 or via e-mail to [email protected]
PitzlMetallbauGmbH & Co. KG
DIN18800
Notes, drafts, reminders
Pitzl GmbH & Co. KG, Siemensstrae 26, DE-84051 AltheimTel.: +49 08703 9346-0, Telefax: +49 08703 9346-55, Infos, Downloads, technische Informationen und hilfreiche Montagevideos: www.pitzl.de
Date
PitzlMetallbauGmbH & Co. KG
DIN18800
-
Fast, simple and precise: for the best result
Timberconnectors Post bases Balcony posts / fence posts always up to date with www.pitzl.de
Manufacturer:
Pitzl GmbH & Co. KGSiemensstrae 26
DE-84051 Altheim - Germany
Tel.: +49 8703 9346-0
Telefax: +49 8703 9346-55
www.pitzl.de
We recommend our distributor:
PitzlMetallbauGmbH & Co. KG
DIN18800
Mod
ifica
tions
and
erro
rs re
serv
ed. I
mag
es a
re s
imila
r. Ver
sion
as o
f 05/
2013
, v50
00/fo
-DE
All r
ight
s re
serv
ed. R
eprin
t in
part
or w
hole
onl
y w
ith e
xpre
ss p
erm
issio
n of
Pitz
l Gm
bH
For more information and technical details, downloads and helpful video tutorials: www.pitzl.de Alternatively, our competent staff are always available for advice:
+49 (0) 8703 9346-0 or via e-mail to [email protected]