Download - PG6
-
THREADED CONNECTING ELEMENTS
PRODUCT GROUP
6
-
PRODUCTGROUP 6
0
1
2
3
4
5
7
8
9
0
1
2
3
4
5
7
8
96.0
CONNECTING ELEMENTS
Connecting elements ______________________________________________6.1
Eye nut type 60 __________________________________________________6.2
Clevis with pin type 61 __________________________________________ 6.2
Turnbuckle type 62 ______________________________________________6.3
Rod coupling type 64 ____________________________________________ 6.3
Connecting rods__________________________________________________ 6.4
Hexagon nut type 63 ______________________________________________6.5
Tie rod LR type 65 ________________________________________________6.5
Stud bolt type 67 ________________________________________________ 6.5
Tie rod type 66 __________________________________________________6.6
Threaded rod type 67 ____________________________________________ 6.6
CONTENTS PAGE
6
-
LISEGA connecting components offer special advantages:
universal application
load and connection compatibility with the LISEGA modular system
drop forged and heat treated
standard electrogalvanized or if required, hot dip galvanized finish
qualification by special type testing
CONNECTING ELEMENTSTYPE 60 TO 64
The components in Product Group 6 arespecially designed threaded elements forconnecting the attachment rods to othersupport components. In the load chains,they connect components that in part havedifferently designed connections such aslugs, clevises or eye nuts.
The connecting parts in Product Group 6form an independent group within themodular system and have been speciallydesigned for optimum suitability as pipesupport components.
The components are drop forged, and de-signed (apart from turnbuckles type 62) toallow slight length adjustments, despitetheir limited installation height.
The permissible loads correspond with theload table for statically determined pipesupports on page 0.5 of the Technical Specifications.
Eye nut Type 60 is used to join the rod to apin connection, the clevis Type 61 to join itto a lug connection.
Turnbuckle Type 62 is supplied with a right-hand thread at one end and a left-hand thread at the other. It is used togetherwith the tie rod Type 65 to provide lengthadjustment and presetting of the load chains.
Coupling Type 64 is used to produce rodlengths greater than 3m.
All threads (except in turnbuckles Type 62)are right-hand and available in metric or UNCstandard.
For corrosion protection, all components aresupplied complete with a standard electro-galvanized finish (zinc thickness approx. 15m, yellow chromatized for metric andwhite for UNC threads). For use in particularlyaggressive environments, the componentscan be supplied with a hot dip galvanizedfinish.
Material certification can be supplied for allcomponents if required.
6.1
In the connection compo-nent field, precision fitthreads, reliable materialgrades and designs withsafe load reserves are theprerequisite for the depen-dability of the entire loadchain.
Eye nut, type 60
Rod coupling, type 64
Turnbuckle, type 62
Clevis with pin, type 61
-
Order details:Eye nut type 60 .. 1.
Eye nuttype 60 D9 19 to 60 50 12Material: P250GHdrop forged
from load group 40:Welded designMaterial: S355J2G3
EYE NUT TYPE 60CLEVIS WITH PIN TYPE 61
6.2
Clevis with pintype 61 D9 19 to 61 50 12Material: P250GHfrom load group 10:S355J2G3drop forged
from load group 40:flame cut designMaterial: S355J2G3
PinC35E + QT complete withcotter pin DIN EN ISO 1234and washer DIN 1441
Order details:Clevis type 61 .. 1.
Shape type 614012, 615012
Type
60 D9 1960 29 1260 39 1260 49 1260 59 1260 69 1260 79 1260 89 1260 99 1260 10 1260 20 1260 30 1260 40 1260 50 12
A
243344597288
100110120135150160220250
B
40607590
110127140157180200230230250280
C
111520253037455260657070
120140
D
17243035445060708095
105110125140
d2
M10M12M16M20M24M30M36M42M48M56x4M64x4M68x4M72x4M80x4
d3
1317252935424752626272728292
E
254045556575758585
105130130100120
F
56
101015172025304040405060
G
15 1926354454627278808590
110125
x
15203035455265729595
100100150160
Weight(kg)0.050.100.200.400.801.202.002.904.707.708.809.30
27.0045.00
Type
61 D9 1961 29 1261 39 1261 49 1261 59 1261 69 1261 79 1261 89 1261 99 1261 10 1261 20 1261 30 1261 40 1261 50 12
A
23334255657285
100120130155155150165
B
50708090
110130150170180215230230240260
C
1115202530354050606570708090
D
17253340465161728390
110110
d2
M10M12M16M20M24M30M36M42M48M56x4M64x4M68x4M72x4M80x4
d1
1012162024334045506070708090
E
35505055658090
10095
120130125130140
F
1112172022273237425060605664
G
50607090
105125140165185210245245230240
H
25344457688093
110130150175175150165
K
2124324653648090
100120150150150180
L
5x98x12
11x1516x2119x2519x2922x3627x4033x4430x4535x5535x55
M
90
110
x
15203035455060708595
100105110120
Weight(kg)0.10.20.41.01.62.74.47.2
10.414.824.424.442.060.0
6
-
6.3
TURNBUCKLE TYPE 62ROD COUPLING TYPE 64
Turnbuckletype 62 D9 19 to 62 50 15Material: S235JRG2drop forgedfrom load group 10:S355J2G3Flame cut design
one end right-hand thread,the other left-hand.
Order details:Turnbuckle type 62 .. 1.
SW
Order details:Rod coupling 64 .. 1.
Rod couplingtype 64 D9 19 to 64 50 15Material: S235JRG2drop forgedfrom load group 10:S355J2G3Flame cut design
Type
62 D9 1962 29 1262 39 1962 49 1962 59 1962 69 1262 79 1262 89 1262 99 1262 10 1562 20 1562 30 1562 40 1562 50 15
A
30344252627486
104130110130140150165
B
125125150170240255295330355300320330390410
C
1821273339455563756070758090
SW
1618243036465565758090
100100120
d2
M10M12M16M20M24M30M36M42M48M56x4M64x4M68x4M72x4M80x4
E
35355060808595
1001058080809090
L
9x 811x 914x1117x1422x1723x2028x2332x2740x3580x2390x28
100x30100x33120x37
x
454550558085
100115125110120125150160
Weight(kg)0.150.200.400.701.201.803.004.807.80
10.0015.0018.0022.0032.00
Type
64 D9 1964 29 1864 39 1864 49 1864 59 1864 69 1864 79 1864 89 1864 99 1864 10 1564 20 1564 30 1564 40 1564 50 15
A
34344252627486
104130110130140150165
B
4545607590
105120150180190220240250280
C
1515202530354050606070758090
D
2121273239455563758090
100100120
d2
M10M12M16M20M24M30M36M42M48M56x4M64x4M68x4M72x4M80x4
L
11x 911x 914x1117x1422x1723x2028x2332x2740x3580x2390x28100x30100x33120x37
Weight(kg)
0.10.10.20.50.71.21.62.65.17.0
11.014.015.023.0
-
CONNECTING RODSTYPE 63 TO 67
6.4
constant hanger. The longer one is the fit-ting length and can be cut on site accordingto installation length.
Standard lengthsIn general, larger tolerance ranges in thebuilding structure of plants frequently leadto problems when lengths cut to measurefor the connecting rods are used; they oftenprove to be too short. Offering more flexibilityin application, connecting rods in standardlengths have come into increasing use.Fitting can be simply carried out with hang-ing rods already mounted at the upper end.Awkward measurement involving the risk oferrors is thereby avoided. Structural toleran-ces can be favorably compensated.
Length adjustmentTie rods type 65 with left/right hand threadsare always used together with turnbuckletype 62 and form standard lengths. They aredesigned for length adjustment and load-actuated presetting of load chains. All otherthread connections are exclusively right-hand and have to be locked using hexagonnut type 63.
Corrosion protectionAll rods are electrogalvanized as standard(coat thickness 15m, chromatized yellowfor metric and white for UNC standards).Hot dip galvanizing is available on request.
CertificationMaterial certification can be supplied for allcomponents on request.
Piping systems are embedded in load chainswhere connecting rods form an indispensablecomponent. When selecting them, specialattention must be paid to quality to preventthese seemingly simple units from becom-ing the weakest link in the chain. Decisivefactors for their loading capacity are, besideadequate dimensions, material quality anddesign.
ApplicationsThreaded rods and tie rods connect supportcomponents to each other to bridge instal-lation heights. In conjunction with connec-ting components they can be used as rigidsupports, and in elastic load chains can beused with spring and constant hangers.
Materials and loadingsFor the attachment rods, only materials withguaranteed mechanical properties, with goodhomogeneity and sufficient cold ductility areused. The permissible loads correspond tothe load sufficient table for statically definedcomponents (see Technical specificationspage 0.5).
Rolled threadsAll threads are manufactured using a rollingprocess. Thread rolling does not sever mil-ling fibres as in thread cutting. By means ofthis thread rolling process the material ismade to flow and thereby plastically formed.In this way, additional strengthening of thesurface is achieved, free of notches and offering high surface quality.
In this way, frictional resistance is reduced, with a favorable effect on theadjustment of the rods under loading. In addition, additional reserves for thebending and tensile strength propertiesresult from this by comparison with thedesign calculations.
TypesFully threaded rods type 67 up to M48 andtie rods type 66 (from M20) are available in500mm length increments from 500mm upto 3000mm. Tie rods are threaded 300mmat one end and 600mm at the other. The shorter thread is for adjustment and,for example, for connection to a variable or
Special advantages:
materials with guaranteed properties
rolled threads
notch-free surfaces
electrogalvanized finish
standard lengths
in-house manufacture
6
Manufacturing process for threadedrods.
-
Order details:Tie rod LR type 65 .. 1.
Tie rod left/right type 65 D1 19 to 65 50 13Material:M10 - M16: S235JRG2from M20: S355JO
LISEGA threaded rod shouldonly be replaced in kind
TIE ROD LR, TYPE 65STUD BOLT, TYPE 67HEXAGON NUTS, TYPE 63
6.5
right left
Stud bolttype 67 D1 19 to 67 91 13Material:M10 - M16: S235JRG2from M20: S355JO
LISEGA threaded rod should only be replaced in kind
Order details:Stud bolt type 67 .. 1.
Hexagon nuttype 63 D9 29 to 63 50 28Material: grade 8Hexagon nuts as counternuts for tie rods and threadedrods M10 to M80x4.
Order details:Hexagon nuttype 63 .. 2.
L
303550607590
110125145
Weight(kg)0.020.030.070.120.220.420.751.171.77
d2
M10M12M16M20M24M30M36M42M48
Type
67 D1 1967 21 1367 31 1367 41 1367 51 1367 61 1367 71 1367 81 1367 91 13
Type
63 D9 29 63 29 2863 39 2863 49 2863 59 2863 69 2863 79 2863 89 2863 99 2863 10 2863 20 2863 30 2863 40 2863 50 28
Size
M10M12M16M20M24M30M36M42M48M56x4M64x4M68x4M72x4M80x4
Weight(kg)0.010.020.030.060.110.220.390.650.981.401.902.252.603.40
Type
65 D1 1965 21 1365 31 1365 41 1365 51 1365 61 1365 71 1365 81 1365 91 1365 10 1365 20 1365 30 1365 40 1365 50 13
d
8.7510.7414.5418.2021.8527.5533.1538.9144.5353.2261.2065.2069.2077.20
d2
M10M12M16M20M24M30M36M42M48M56x4M64x4M68x4M72x4M80x4
L
250250250250350350350450450550550550600600
Weight(kg)
0.10.20.30.51.01.62.44.25.59.6
12.714.417.722.1
L1right
80808080
120120120160160200200200220220
L2left130130130130190190190220220270270270300300
-
66.6
TIE ROD, TYPE 66THREADED ROD, TYPE 67
Material: M10 - M16: S235JRG2from M20: S355JO
LISEGA threaded rod shouldonly be replaced in kind
Order details:Threaded rod / Tie rodtype ...
(at M56x4:)Threaded rod / Tie rod type ...L = ... L1= ...L2= ...
Threaded rod type 67
Tie rod type 66
Connecting rods fromM56x4 upwards can beordered both as threadedrods type 67 or as tie rodstype 66 with individualrolled thread lengths.
L = max 6000mm, longer lengths on request
L1 L2
Standard lengths avoidproblems from undersizedinstallation lengths andallow flexibility by cuttingto length on site if required.
Weight(kg/m)0.50.71.32.02.94.76.89.3
12.2
100067 D3 1967 23 1367 33 1367 43 1367 53 1367 63 1367 73 1367 83 1367 93 13
150067 D4 1967 24 1367 34 1367 44 1367 54 1367 64 1367 74 1367 84 1367 94 13
200067 D5 1967 25 1367 35 1367 45 1367 55 1367 65 1367 75 1367 85 1367 95 13
250067 D6 1967 26 1367 36 1366 46 1366 56 1366 66 1366 76 1366 86 1366 96 13
300067 D7 1967 27 1367 37 1366 47 1366 57 1366 67 1366 77 1366 87 1366 97 13
Type at L=
Type (L / L1 / L2 please note at order)
50067 D2 1967 22 1367 32 1367 42 1367 52 1367 62 1367 72 1367 82 1367 92 13
d2
M 10M 12M 16M 20M 24M 30M 36M 42M 48
Weight(kg/m)17.523.126.229.536.8
d2
M 56x4M 64x4M 68x4M 72x4M 80x4
66 10 1366 20 1366 30 1366 40 1366 50 13
67 10 1367 20 1367 30 1367 40 1367 50 13
600300
Standard Supports 2010IntroProductsProduct Group 0Product Group 1Product Group 2Product Group 3Product Group 4Product Group 5Product Group 6ContentsRod connecting elements, type 60 to 64Eye nut type 60 Clevis with pin, type 61Turnbuckle type 62Rod coupling, type 64Connecting rods, type 63 to 67Tie rod LR, type 65Stud bolt, type 67Hexagon nuts, type 63Tie rod, type 66Threaded rod, type 67
Product Group 7Product Group 8Product Group 9
Contact