Fittings, Materials and Tubing GuideInstrumentation Products
Parker Hannifin Manufacturing Ltd. Instrumentation Products Division Europe Riverside Road, Pottington Business Park,Barnstaple, Devon, EX31 1NPUnited Kingdom Tel.: +44 (0) 1271 31 31 31 Fax: +44 (0) 1271 37 36 36www.parker.com/ipd Catalogue 4190 FMTG
2011 Parker Hannifin Corporation. All rights reserved. Parker Hannifin Corporation Instrumentation Products Division 1005 A Cleaner WayHuntsville, AL 358050Tel.: +1 (256) 881-2040Fax: +1 (256) 881-5072www.parker.com/ipdus
AE UAE, Dubai Tel: +971 4 8127100 [email protected]
AR Argentina, Buenos Aires Tel: +54 3327 44 4129
AT Austria, Wiener Neustadt Tel: +43 (0)2622 23501-0 [email protected]
AT Eastern Europe, Wiener Neustadt Tel: +43 (0)2622 23501 970 [email protected]
AU Australia, Castle Hill Tel: +61 (0)2-9634 7777
AZ Azerbaijan, Baku Tel: +994 50 2233 458 [email protected]
BE/LU Belgium, Nivelles Tel: +32 (0)67 280 900 [email protected]
BR Brazil, Cachoeirinha RS Tel: +55 51 3470 9144
BY Belarus, Minsk Tel: +375 17 209 9399 [email protected]
CA Canada, Grimsby, Ontario Tel +1 [email protected]
CH Switzerland, Etoy Tel: +41 (0) 21 821 02 30 [email protected]
CN China, Shanghai Tel: +86 21 5031 2525
CZ Czech Republic, Klecany Tel: +420 284 083 111 [email protected]
DE Germany, Kaarst Tel: +49 (0)2131 4016 0 [email protected]
DK Denmark, Ballerup Tel: +45 43 56 04 00 [email protected]
ES Spain, Madrid Tel: +34 902 33 00 01 [email protected]
FI Finland, Vantaa Tel: +358 (0)20 753 2500 [email protected]
FR France, Contamine s/Arve Tel: +33 (0)4 50 25 80 25 [email protected]
GR Greece, Athens Tel: +30 210 933 6450 [email protected]
HK Hong Kong Tel: +852 2428 8008
HU Hungary, Budapest Tel: +36 1 220 4155 [email protected]
IE Ireland, Dublin Tel: +353 (0)1 466 6370 [email protected]
IN India, Mumbai Tel: +91 22 6513 7081-85
IT Italy, Corsico (MI) Tel: +39 02 45 19 21 [email protected]
JP Japan, Tokyo Tel: +(81) 3 6408 3901
KR South Korea, Seoul Tel: +82 2 559 0400
KZ Kazakhstan, Almaty Tel: +7 7272 505 800 [email protected]
LV Latvia, Riga Tel: +371 6 745 2601 [email protected]
MX Mexico, Apodaca Tel: +52 81 8156 6000
MY Malaysia, Shah Alam Tel: +603-78490800
NL The Netherlands, Oldenzaal Tel: +31 (0)541 585 000 [email protected]
NO Norway, Stavanger Tel: +47 (0)51 826 300 [email protected]
NZ New Zealand, Mt Wellington Tel: +64 9 574 1744
PL Poland, Warsaw Tel: +48 (0)22 573 24 00 [email protected]
PT Portugal, Leca da Palmeira Tel: +351 22 999 7360 [email protected]
RO Romania, Bucharest Tel: +40 21 252 1382 [email protected]
RU Russia, Moscow Tel: +7 495 645-2156 [email protected]
SE Sweden, Spnga Tel: +46 (0)8 59 79 50 00 [email protected]
SG Singapore Tel: +65 6887 6300
SK Slovakia, Bansk Bystrica Tel: +421 484 162 252 [email protected]
SL Slovenia, Novo Mesto Tel: +386 7 337 6650 [email protected]
TH Thailand, Bangkok Tel: +662 717 8140
TR Turkey, Istanbul Tel: +90 216 4997081 [email protected]
TW Taiwan, Taipei Tel: +886 2 2298 8987
UA Ukraine, Kiev Tel +380 44 494 2731 [email protected]
UK United Kingdom, Barnstaple Tel: +44 (0)1271 31 31 31 [email protected]
US USA, Cleveland Tel: +1 216 896 3000
VE Venezuela, Caracas Tel: +58 212 238 5422
ZA South Africa, Kempton Park Tel: +27 (0)11 961 0700 [email protected]
Parker Worldwide
European Product Information Centre
Free phone: 00 800 27 27 5374
(from AT, BE, CH, CZ, DE, EE, ES, FI, FR, IE,
IT, PT, SE, SK, UK)Fittings, M
aterials and Tubing Guide
Private and Confidential177
Medium
Pressure Instrum
ent Fittings
MPI Medium Pressure Fittings
1. Front ferrule with corrosion-resistant Parker Suparcase forms a tight pressure seal between the body and ferrule in a second strong mechanical hold on the tube.
2. Rear ferrule with corrosion-resistant Parker Suparcase provides a strong mechanical hold on the tube.
3. Longer thread area for improved resistance to pressure and load on the ferrules.
4. Molybdenum disulfide-coated inverted nut helps prevent galling, provides easier assembly, and permits multiple remakes.
5. Long tube-support area improves resistance to vibration and line loads.
IntroductionParker Hannifin MPI Fittings are engineered and manufactured to provide secure, tight, and leak-resistant connections throughout industry, including off-shore oil and gas exploration platforms, research labs, and other facilities that require operating pressures in the range of 6,000 to 15,000 psi.
MPI Fittings are ideally suited to handle liquids, gases, or chemicals and can be used on a wide variety of tubing materials including cold drawn 1/8 hard (unannealed) tubing or instrument grade thick-walled annealed stainless steel. Every Parker MPI Fitting is supplied complete and ready to install.
1 2 4
Advanced FeaturesEvery MPI Fitting has the features shown below:
Dedication to Quality Our resources and vast product line, is available through our worldwide distribution network.
For more information regarding our products and services, please contact your authorized Parker Instrumentation Distributor.
Materials and Identification Standard MPI Fittings are made of Heat Code Traceable 316 stainless steel. Tubing and fitting materials should be selected based on compatibility with the fluid or gas media.
MPI Fittings Pressure Ratings Part numbers for MPI Fittings use symbols that identify their style, size, and composition.The maximum pressure rating is marked on each fitting. MPI working pressures to be determined by selected tubing. Please see tables on page 3 for specific working pressures.
Size 4 MPI end to 15,000 psi Size 6 MPI end to 15,000 psi Size 8 MPI end to 15,000 psi Size 9 MPI end to 15,000 psi Size 12 MPI end to 15,000 psi Size 16 MPI end to 12,500 psi
AssemblyMPI Fittings are installed with standard hand tools. Each size can be preset with a Parker hydraulic preset tool. Tube preparation does not require cutting of threads or tube end coning.
Private and Confidential178
Med
ium
Pre
ssur
e In
stru
men
t Fitt
ings
MPI Medium Pressure Fittings
High Pressure to MPI Tube StubX41HT7 Page 190
Medium Pressure Port Connector to MPI Tube StubX47HT7 Page 190
Medium Pressure to MPI Tube StubX42HT7 Page 191
MPI Male ConnectorFBMP7 Page 183
37 Flare to MPI ConnectorXHBMP7Page 183
37 Flare Bulkhead to MPI ConnectorMP7H2BX Page 184
High Pressure to MPI ConnectorX41HBMP7 Page 184
Medium Pressure to MPI ConnectorX42HBMP7 Page 185
MPI to Female NPT ConnectorGBMP7 Page 185
MPI to SAE Male O-ring ConnectorMP7HBA Page 186
Type M High Pressure Hose to MPI ConnectorM40HBMP7 Page 186
MPI Bulkhead to Female NPTGH2BMP7 Page 187
Visual Index
MPI Fittings MPI Union ConnectorHBMP7Page 187
MPI Bulkhead Union ConnectorWBMP7 Page 188
MPI Male End to Female NPTGM7 Page 188
MPI Male End to High Pressure C&T PortGM7 Page 188
MPI Tube Port ConnectorT7HBT7 Page 189
MPI Tube Stub to Male NPT PipeT7HF Page 189
37 Flare to MPI Tube StubXHT7 Page 190
MPI Tube Stub to Male SAE O-ringT7HOA Page 191
Type M High Pressure Hose Adapter to MPI Tube Stub M40HT7 Page 191
MPI Tube Stub ReduceTRBMP7 Page 192
MPI Tube Stub to Female NPT PipeT7HG Page 192
MPI Port Connector MP7PCPage 193
45 MPI Union ElbowNBMP7 Page 193
45 MPI Tube Stub ElbowT7NBT7 Page 194
MPI Union ElbowEBMP7 Page 194
MPI Tube ElbowT7EBT7 Page 195
MPI to Male NPT ElbowCBMP7 Page 195
MPI Union TeeJBMP7 Page 196
X44 Male by MPI ConnectorX44HBMP7 Page 197
X44 Male by MPI Tube StubX44HT7 Page 197
Type M Male by X44 MaleM40HX44 Page 197
Adapter AssemblyX44 Page 197
MPI to NPT Male Run TeeRBMP7 Page 198
Private and Confidential179
Medium
Pressure Instrum
ent Fittings
MPI Medium Pressure Fittings
MPI to NPT Male Branch TeeSBMP7 Page 198
MPI to NPT Female Branch TeeOBMP7 Page 199
MPI Union CrossKBMP7 Page 199
MPI PlugFNMP7 Page 200
MPI PlugFNM7 Page 200
MPI CapPNBMP7 Page 200
MPI Front FerruleMPFF Page 200
MPI Back FerruleMPBF Page 201
MPI NutBMP7 Page 201
Gap GaugePage 201
Visual Index (Continued)
Private and Confidential180
Med
ium
Pre
ssur
e In
stru
men
t Fitt
ings
MPI Medium Pressure Fittings
(1) If additional information, including heat code traceability, is required, contact Parker Hannifin or your nearest MPI Fitting distributor.
(2) Parker MPI Fittings work reliably on cold drawn - 1/8 hard tubing (both MPI and Cone & Thread), and fully annealed, heavy wall type 316 tubing. See page 182 for more information about tubing.
Typical Raw Material Specifications
How To Order MPI FittingsDimensions in inches are for reference only, subject to change.
Parker MPI Fittings should be ordered using the part number as listed in this catalog.
Part numbers are developed as follows:1. A combination