Download - P. Martin Mai Institute of Geophysics, ETH Zurich [email protected] and the SPICE Local Scale Group
MTR meeting, Tutzing, FEB 2006 1
P. Martin MaiInstitute of Geophysics, ETH Zurich
and the SPICE Local Scale Group
(Ampuero, Delouis, Festa, Holden, Madariaga, Moczo, Vilotte, Zarahdnik …)
Blindtest onBlindtest onKinematic Source InversionKinematic Source Inversion
Initial (sobering) resultsInitial (sobering) results
MTR meeting, Tutzing, FEB 2006 2
► ► Goal:Goal: perform accurate kinematic finite-source perform accurate kinematic finite-source inversion to estimate the rupture process during inversion to estimate the rupture process during earthquake faultingearthquake faulting
► ► Approach:Approach: test various source-inversion methods, test various source-inversion methods, and assess their resolution, strength and weaknesses to and assess their resolution, strength and weaknesses to finally “design” the optimal inversion strategyfinally “design” the optimal inversion strategy
► ► Method:Method: generate synthetic near-source motions for generate synthetic near-source motions for some source rupture model (with increasing complexity some source rupture model (with increasing complexity as the project progresses) that is known to only one as the project progresses) that is known to only one person (M. Mai), while interested researchers can then person (M. Mai), while interested researchers can then apply their source-imaging technique “blindly”apply their source-imaging technique “blindly”
OUTLINEOUTLINE
MTR meeting, Tutzing, FEB 2006 3
The Model SetupThe Model Setup
• Earthquake source geometry and station distribution chosen to be reminiscent of the 2000 Tottori earthquake (M = 6.9), but the details of the rupture process are not known.
MTR meeting, Tutzing, FEB 2006 4
The Model SetupThe Model Setup
• Synthetic seismograms are then computed, assuming (unknown to modelers) constant rupture velocity, constant rise time, simple slip-velocity function, and heterogeneous slip.
• A discrete wave-number integration method (0.01 < f < 3 .0 Hz) is used for wavefield calculations.
• In the first step, no noise is added to the synthetics; later, also the above conditions on vr, tr will be relaxed. • The modelers are given;
• seismic moment: 1.43 1019
Nm• dip = 90o
• rake = 150o
• hypocentral depth = 12.5 km• velocity-density structure
MTR meeting, Tutzing, FEB 2006 5
INITIAL RESULTSINITIAL RESULTS
• So far, four researchers have sent in their inversion solution to this initial problem:
the results are remarkably diverse !!!!!
In alphabetical order …
Betrand Delouis: Non linear inversion by simulated annealing
Gaetano Festa: back-projection of the S -amplitudes along the rays
Catherine Holden: non linear inversion using the neighbourhood algorithm
Jiri Zahradnik: iterative moment-tensor deconvolution, combined with forward modeling
MTR meeting, Tutzing, FEB 2006 6
INITIAL RESULTSINITIAL RESULTS
Betrand Delouis: Non linear inversion by simulated annealing
vr = 3.1 km/s, tr = 1.0 s
NOTE THE GOOD DATA FITTING !!!
MTR meeting, Tutzing, FEB 2006 7
INITIAL RESULTSINITIAL RESULTS
Gaetano Festa: back-projection of the S -amplitudes along the rays
vr = 2.8 km/s, tr = 1.0 s
NOTE THE GOOD DATA FITTING !!!
MTR meeting, Tutzing, FEB 2006 8
INITIAL RESULTSINITIAL RESULTS
Catherine Holden: non linear inversion using the neighbourhood algorithm
vr = 2.15 km/s, tr = ?? s
NOTE THE GOOD DATA FITTING !!!
MTR meeting, Tutzing, FEB 2006 9
INITIAL RESULTSINITIAL RESULTS
Jiri Zahradnik: iterative moment-tensor deconvolution, combined with forward
modelingvr = 2.6 km/s, tr = 1.0 s
NOTE THE GOOD DATA FITTING !!!
MTR meeting, Tutzing, FEB 2006 10
THE SOLUTIONTHE SOLUTION
… and here comes the long awaited answer ….
• vr = 2.7 km/s and tr = 0.8, using an isosceles triangle as SVF;• max. displacement ~ 2.5m, about 15 km north-west of the hypocenter• the rupture expanded primarily in the NW-direction
MTR meeting, Tutzing, FEB 2006 11
CONCLUSIONSCONCLUSIONS
► Can we conclude anything from this exercise yet??
► First of all: work is needed to make this solutions agree
-- consistent definition which stations to use and how to perform the data preparation, to eliminate any bias coming from there-- differences due to Green’s function calculations ??-- differences due to inversion approach (linear vs. non-linear, parameterization, smoothing, misfit function, etc) ??
► Next step: quantitative comparison of inverted slip models:-- cross-correlation analysis with respect to input model-- slip values at selected points-- overall slip distribution-- ….