Two Preloaded 8.8" Wide Touch Screen UniversalReplacement Headrest Monitors Package
OWNER S MANUAL
HDVD-9BK
AV2SD USB
HDVD-9BG HDVD-9GR HDVD-9GRDK
Specifications
DC 12V
9W
8.8 TFT-LCD
16 :9 Wide
1440x234
DVD-AV1-AV2
Ac t i ve Ma t r i x TFT
Power Requirements
Power Consumption
Screen Size
Screen Format
Resolution Pixel
A/V Input
Dimensions(With shroud)
LCD Panel Type
Compatible video standard NTSC/PAL au to se lec t
Note : This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
11 .6 (L )X8 .7 (W)X4 .7 (H ) i nches
1 EAA/V Output
Caution
Please read and observe all warnings and instructions in this manualand those marked on the unit. Retain this booklet for future reference.
There are two kinds of alarm symbols as follows:
WARNING
WARNING
CAUTION
The lightning bolt with arrowhead inside in an equilateraltriangle is intended to alert the user to the presence of
dangerous voltage within the product s enclosure that may beof sufficient magnitude to constitute a risk of electric shock topeople.
The exclamation point inside an equilateral triangle is intendedto alert the user to the presence of important operating andmaintenance (servicing) instructions in the literature accompanyingthe product.
Installation of all TV monitorsmust be out of the driver sfield of vision.
Do not try and service theseproducts yourself, aqualified service center orfactory service center for allrepairs.
locale
Be careful not to drop orapply under pressure to thefront panel of your videomonitor. If the screen cracksdue to misuse, your warrantywill be void!
Do not mount the product whereit will obstruct the deployment ofthe airbag or in an area where itwould affect the driver s abilityto control the vehicle. Also becareful to avoid mounting theproduct where it can becomehazardous during sudden stopsor in the event of an accident.
Use extra caution with any liquidsin your car. If you or your childspills any liquid on these products,pull your vehicle to the roadsideand turn the key off to disconnect
or wipe the products with a towel. Do notoperate the equipment until all liquids haveeither evaporated or you have had the monitorinspected at a service center by a qualifiedtechnician. Severe harm or danger can result.
Use only a damp cloth to cleanthe screen and use only purifiedwater on the cloth. wring out allexcess water prior to wiping thescreen. Do not use any cleanersor chemicals to clean the screen.In most cases a dry cloth will do!
POWER AV MENU
,
,
Troubleshooting
Symptom Items to Check Actions to be Taken
Remote control doesnot work properly.
Is the power turned on?
Is the audio which is connected withthe audio cable set to receivethe DVD signal output?
Is audio cable connected securely?
Is the monitor which is connectedwith the audio cable turned on?
Is the audio output setin the correct position?
Is the remote control facingthe remote sensor?
Is the distance too far?
Is there any obstacle in the middle?
Is the battery weak?
Check the car battery capacity.
Select the correct input mode for the audio receiver.
Connect the audio cable into the jacks securely.
Turn on the monitor connected with the audio cable.
Set the Audio Output to the correct position,and then turn on the DVD player again by pressingthe POWER button.
Point the remote control toward the remote sensor ofthe product.
Use the remote control within 15 feet.
Remove the obstacle.
Replace with new battery.
Buttons do not work.
No sound
When a disc is brought from a cold environment to a warm one, there may be moistureon the the disc, or condensation on the pickup lens. It will affect disc playback.
1. Remove the disc from the DVD player.2. Turn on the power and leave it on for an hour to vaporize the condensation.
Moisture or condensation on lens
Quality installations are best
performed by qualified and
certified installers.
Don t touch the unit if there isa flash of lightning. You mayreceive an electric shock.
Do not cover or stop up heaterducts or vents. It may cause afire or receive an electric shock.
Watching the monitor for anextended period of timewithout the engine runningmay deplete the vehicle sbattery charge.
This product is designed foroperation with a 12 Volt DC,negative ground vehicle. Itis not suitable for operationunder other conditions orvoltages.
CAUTION
Operating Notes
Do not bring magnetic devicessuch as credit card or magneticcard near the magnets.
1. The operating temperature of this product is limited to 14 ~+140 F.
2. If your vehicle is extremely hot or cold you must allow time for your air
conditioner or heater to cool or heat the vehicle until operating temperatures
have returned to normal operating ranges.
3. Optimal picture quality is achieved when viewed from directly front of the
monitor (+/-30degrees).
4. Do not open the housing and attempt to make any repairs yourself. Refer
servicing to qualified personnel.
5. DVD Players use an invisible laser beam which can cause hazardous radiation
exposure. Be sure to operate the unit correctly as instructed.
6. Do not cut the car power supply off while a disc is playing. It can cause
damage to the DVD Player.
7. If the buttons get stuck, please try to press the up of buttons, it will get back.
It won't impact using normal.
8. If you cann't find the files name in list when playing, please reset units or
turn off/on over again.
9. If the unit cann't be change mode when playing some special files which the unit
didn't support, please reset units or turn off/on over again.
CautionDisc Information
DVD features
DVD discs provide high-resolution images with high-quality sound. This DVD playercan play not only DVD discs of various versions, but also S-VCD, VCD, audio CD andMp3 discs.
Discs that cannot be played
DVD-RW, DVD-REM, CD-ROM, CD-EXTRA discs cannot be played on this unit. Inaddition, a CD or a CD-RW which was recorded on special software cannot be played.
Region code
Your DVD player is designed and manufactured to region management informationthat is recorded on a DVD disc. Please check the region code.1: North America 2: Japan 3: Korea and Southeast Asia4: Australia, Mid & South America 5: Russia 6: China
How to handle the disc
Don t touch the shiny side of the disc (the side with the embedded information).Don t stick a label or a glue-based note on either side of the disc.Don t use discs that have glue or a damaged label with exposed adhesive residue.It might result in damage to your DVD player.Don t put discs in the sunshine.Park your car in the shade.
How to handle the discs
Only use round discs. Discs with other shapes like a star, a heart, etc. may causedamage to the player. If a disc is dirty, wipe softly with a wet cloth and then with a dryone. Before playback, wipe the disc outward from the center with a clean cloth. Do notuse any type of solvent such as thinner, benzene, commercially available cleaners orantistatic spray. To avoid damaging your DVD player, don t use a scratched disc.
How To Control The Monitor
AV2SD USB
1. Power On/Off
<Unit>
To power on the unit, press POWER button on the monitor;or press POWER button on the remote control.
AV2SD USB
To power the off unit, press MPWR or PWR on the monitor;or press POWER button on the remote control.
2. Mode Change
MENU MODE MPWR
AV2SD USB AV2
SD USB
PLAY
MENU
STOP
PREV
NEXT PWR
VOL-
MODE
VOL+
(1) Press any place on the monitor screen with your finger softly ,and you will see the MODE button on the monitor .
(2) Press the MODE button to change an Input Mode.(AV1-AV2-DVD)
AV2SD USB
PLAY
MENU
STOP
PREV
NEXT PWR
VOL-
MODE
VOL+
AV2SD USB
MODEMENU MPWR
1
2
Installation
Product installed
AV2
1. Remove the existing headrest from the seat.
2. Adjust the posts of the new headrest to fit the holes in the seat where theheadrest will be installed. The post can be moved together or apartgrasp one post in each hand, move the posts in opposing directions(like they were walking) while pushing them toward each other or awayfrom each other.
3. Insert the cable in the proper hole. Insert the posts into the holes in theseat and carefully work the headrest into position. Make sure the cableis not pinched.
4. Run the cable down the seat and out to the location of the video sourceunit (such as a DVD player).
5. See the picture on the right and you can adjustthe distance between the tubes to requiredspace(pole width adjustments 4 ~ 8.2 .)
How to use the Adapter tubes
Since the spacing of the mounting holes
can vary on different veicles we supply
two adapter tubes. Use these tubes when
the headrest mounting holes in your seat
are too large for the posts of the headrest
monitor.
AV2SD USB
SDUSB
AV2SD USB
MENU MODE MPWR
How To Control The Monitor
3. Picture Control Menu
AV2SD USB
MODEMENU
MENU
CONTRASTBRIGHTNESSCOLORFMRESET
50
(1) When the MENU button on the monitor screen is
pressed, the picture setting menu will be shown.
(2) Use to achieve the desired settings for
CONTRAST,BRIGHTNESS, COLOR,
FM and RESET.
CONTRAST : Contrast between light and shade
BRIGHTNESS : Dim Bright
COLOR : Control of color
SHARPNESS : Sharpness of view
FM : 87.7 89.1MHz
RESET : Brings its factory defaults
(3) Press the button continuously to highlight
the desired picture setting menu to control, and
adjust the values with the left /right arrow buttons
while menu OSD is still displayed on the screen for
changing the values.
(4) When using a Remote Controller, press MENU button
on the Remote Controller to bring out the menu, and
adjust the values.
MENU
If there is no more touch control for 5 secondswhile any buttons or the Picture Control Menuare being shown on the monitor, all buttons &menu will be disappeared automatically.
Note
AV2SD USB
3. Description of Remoto Control Menu for DVD Player
PLAYPlay DVD
STOPStop DVD play
PREVMove to the previous
chapter or track
NEXTMove to the nextchapter or track
PLAY
STOP
PREV
NEXT PWR
VOL-
MODE
VOL+
VOL-Volume Down
VOL+Volume Up
MODE
PWRDVD PlayerPower On/Off
MENU
MENUBrightness
ContrastTint
ColorSharpnss
Reset
Use these buttons to select either fastforward or fast reverse playback.
Connection Diagram
Connect the wires as indicated:
a. Red: Connect to a switched(+) 12 volt source (ACC). Use a lead that has(+) 12Vwhen the ignition on or in the ACC position so the monitors turns off when the key isin the off position. Wiring the monitors hot could cause your battery to run downwhen the engine is not running.b. Black: Connect to a good chassis ground.c. Reversing the polarity of the red and black leads will damage the monitor.d. Connect the video input connector to the video output from the source unit(i.e. DVD player)e. Test the syetem.
AV2SD USB
RF Wireless Stereo Headphone
(A CH:914MHz B CH:915MHz)
VIDEO OUTPUT
AUDIO OUTPUT
AUDIO OUTPUT
VIDEO INPUT
AUDIO INPUT
AUDIO INPUT
AV1 AV2 DVD
How To Control The Monitor
1 2 3 4 5 6 7
88
AV2SD USB
Headphone output
Adjustable steel Pipe
PIPE
AV2 Inputs
HEADPHONE JACK
STOP
When this button is pressed,playback is stopped.
9 10
SD Inputs
USB Inputs
9
10
SD/USB Functions
1. When USB or SD is inputed, the monitor will be displayed as shown below. But whenyou input USB that the function can not change into SD state (only the SD ismoving). And you can select the desired menu by
2.
pressing the MODE button on theremote control of monitor.
Use the (arrow and ENTER) buttons to select and set desired settings.
00:00
000/003
00:00 kbps
S
\
..
..
REMOTE IR SENSOR11
11
Remote ControDVD Functions
PBC
[DVD]/[AUDIO]/[MP3]
[VCD]
You can turn the PBC (Play Back Control) function on or off by pressing this button.When PBC is loaded, the PBC function is enabled automatically. This function issimilar to selection of DVD title. Please note that this function does not work withMP3 dics.
Zoom
[DVD]
Some DVDs are programmed to allow you to zoom intothe image, magnifying it. Pressing the ZOOM buttondoes this in steps, according to the chart to the right.
[VCD]/[AUDIO]/[MP3]
GO TO
The GO TO function allows you to begin playback at a specific location on the disc. Todo this, press GO TO and navigate the screen which follows to select this playbacklocation.
TitleMove to the desired title.
Chapter
Move to the desired chapter.
AudioSelects the desired audio output.
SubtitleSelect the desired subtitle.
Angle
Watch the different view angle.
TT TimeTotal time.
CH TimeChapter time.
Repeat
Sets the repeat play.
Time Display
Watch play time.
OSD
2 X
3 X
4 X
1 / 2
1 / 3
1 / 4
ZOOM X 2
CONDITION
ZOOM X 3
ZOOM X 4
ZOOM X 1 / 2
ZOOM X 1 / 3
ZOOM X 1 / 4
Off
Menu
Title
Chapter
Audio
Subtitle
01 / 0201 / 02
06 / 6106 / 61
5.1CH Chinese5.1CH Chinese
OFF
Bitrate 31Bitrate 31 Title Elapsed 0:20:02Title Elapsed 0:20:02
This button does not function in PBC mode.
This button does not function in this mode.
Remote Control
Turns the DVD Player/Monitor on or off.
(IPOD) (not function in this unit)
DVD AV1 AV2
AV SELECT
P/N
This button permits you to chooseamong Multi, PAL and NTSC.
Use to move to the desired menu.
DISPLAY
Press to show elapsed or remainingtime of a chapter or a title.
NUMERIC button
Use when making a selection on themenu screen.
MODE
DVD SD USB
POWER1
2 MUTE
Press this button to switch off theaudio during playback. Press againto restore the audio.
3
VOL-/VOL+ (not function in this unit)
MENU (OSD on monitor)
Press this button to open the on-screen menu system to setup andcontrol various parameters of themonitor and DVD player.
UP/DOWN
MENU (DVD menu)
This button permits you to view themenu on the DVD.
SUBTITLEUse this button to select the menufor choosing a subtitle language.
TITLE (Title menu)
When a DVD is playing, press thisbutton to view the Title Menu.
PBC (Video CD only)
Press this button to access the specialPlayback Control functions for VCD2.0 format Video CD S.
Use this button to switch betweenthree modes
To start playback of iPOD, pressthis button. Press again to pausethe playback. If playback is paused,press this button to resumeplayback.
RIGHT( )/LEFT( ) ARROWS(not function in this unit)
Use to incease or decreasevolume level.
Use these buttons(press once)to skip to the next or last track,chapter or file on the iPOD inthe player. But if you use thesebuttons (press continuous) toselect either fast forward or fastreverse playback.
MONITORiPOD
Vol+
Vol-
Remote Control DVD Functions
Repeat
Pressing REPEAT button changesthe play mode as follows:
[DVD]
OSD CONDITION
Chapter
Title
All
Repeat chapter
Repeat title
All
Repeat off
[VCD]
The REPEAT button does not functionwhen a VCD disc is being played.
Pressing REPEAT button changesthe play mode as follows:
[AUDIO]
OSD CONDITION
Track
All
Repeat single
All
Repeat off
[MP3]
Pressing REPEAT button changesthe play mode as follows:
OSD CONDITION
Repeat One
Repeat Folder
Folder
Single
Repeat folder
All
Random play
Shuffle
Random
Single
Repeat folder one time
Single play
NTSC/PAL
This button is used to select the video standard for the DVD mode between NTSCand PAL formats.
Angle
Some DVD s are recorded with additional footage which allows you to view a scenefrom a different camera angle. If the ANGLE feature is enabled in the Setup Menu(see page 14) and the disc has this option,an angle mark will be displayed onthe screen. When that occurs, press the ANGLE button to see these alternate viewingangles.
A-B (repeat from A to B)
VOL-/+ button
AUDIO
ENTER
ZOOM
UP/DOWN/RIGHT/LEFT ARROWS
PLAY/PAUSE
GO TO
STOP
SKIP FORWARD/BACK
FAST FORWARD/REVERSE PLAY
Use these buttons to select either fastforward or fast reverse playback.
Use this button to select the beginningand end of a track which you wish to haverepeat in playback.
Use to incease or decrease volume level.
Use this button to select one of theaudio soundtracks programmed on aDVD disc. It is alse used to select theaudio output mode for the DVDplayback.
Press this button to confirm the itemyou have found and highlighted usingthe arrow buttons. Usually this is doneto confirm a selection or item to beplayed on the DVD.
If your DVD disc supports zooming into see the program differently, pressingthis button will enable you to changethe amount of zoom.
Use thes buttons to navigate thevarious menus and screens for themonitor and DVD systems.
To start playback of a disc, press thisbutton. Press again to pause theplayback. If playback is paused, pressthis button to resume playback.
Use to search for a title or a chapter onyour DVD disc.
Press this button to stop the playbackof the current disc.
Use these buttons to skip to the nextor last track, chapter or file on thedisc in the player.
RETURN
SETUP
Press this button to display the Setupmenu. The Setup menu enables youto enter the settings required for theunit to work properly.
REPEAT
Press this button to change the playbackmode to repeat.
Press this button to return to the root menu.
Power And Mode Selection
How to Swivel The Monitor
You can adjust the swive l angle as shown below.
How to Watch The Monitor
UNIT REMOTE CONTROLLER
1. Connect the monitor to the external devices.
2. Press the button on either the remote control or the unit once to turnthe power on.Press the same button to turn the power off.
POWER
POWER
3. Turn on the external devices and view.
DVD Functions
Prev( )
Press this button to advance the player from the current chapter.
to the previouschapter
[DVD]/[VCD]
[AUDIO]/[MP3]
Press this button to move to the previous track.
Next( )
Press this button to advance the player from the current chapter .to the next chapter
[DVD]/[VCD]
[AUDIO]/[MP3]
Press this button to move from the current track .to the next track
Repeat(A-B)
You can set the player to repeat a segment over and over until you cancel it. To dothis, you mark the beginning of the desired segment (A) and the end of segment (B).The selected segment will berepeated automatically until canceled.
[DVD]/[VCD]/[AUDIO]
OSD CONDITION
A
A B
Start point of repeat
Ending point repeat function
Make this arrow to swivel the monitor
AV2
SDUSB
Power and Mode Selection
Selecting an AV mode
1. Turn the power ON on the unit and on the external devices.
2. Select the DVD, AV1 or AV2 mode by pressing the AV Select button onthe unit or on the remote control.
3. Play the external device.
DVD Functions
Fast Reverse Searching( )
Pressing FR button repeatedly changesthe play mode as follow:
[DVD]
OSD CONDITION
FR 2X
FR 4X
FR 8X
2X rewind search
4X rewind search
Pressing FR buttonchanges the play mode as follow:
repeatedly
[AUDIO]
[MP3]Pressing FR buttonchanges the play mode as follows:
repeatedly
FR 16X
FR 32X
PLAY
8X rewind search
16X rewind search
32X rewind search
Play
OSD CONDITION
FR 2X
FR 4X
FR 8X
2X rewind search
4X rewind search
FR 16X
FR 32X
PLAY
8X rewind search
16X rewind search
32X rewind search
Play
OSD CONDITION
FR 2X
FR 4X
FR 8X
2X rewind search
4X rewind search
FR 16X
FR 32X
PLAY
8X rewind search
16X rewind search
32X rewind search
Play
Fast Forward Searching( )
Pressing FF button changesthe play mode as follow:
repeatedly
[DVD]
OSD CONDITION
FF 2X
FF 4X
FF 8X
2X forward search
4X searchforward
Pressing FF buttonchanges the play mode as follow:
repeatedly
[AUDIO]/[VCD]
[MP3]Pressing FF buttonchanges the play mode as follows:
repeatedly
FF 16X
FF 32X
PLAY
8X searchforward
16X searchforward
32X searchforward
Play
OSD CONDITION
FF 2X
FF 4X
FF 8X
2X forward search
4X searchforward
FF 16X
FF 32X
PLAY
8X searchforward
16X searchforward
32X searchforward
Play
OSD CONDITION
FF 2X
FF 4X
FF 8X
2X forward search
4X searchforward
FF 16X
8X searchforward
16X searchforward
FF 32X
PLAY
32X searchforward
Play
Picture Control
FM
87.7
(FM function added 87.7 87.9 88.1 88.3 88.588.7 88.9 89.1MHz)
To adjust CONTRAST, BRIGHTNESS, COLOR or FM press the MENU button untilyou arrive at the screen for that item. Use the arrow buttons to adjust the value.Press the MENU button to make another adjustment or leave the MENU system.
Contrast/Brightness/Color/FM
CONTRAST
BRIGHTNESS
COLOR
50
1. Bring up the on-screen function menu by pressing the MENU button on the unitor the remote control.
2. Press the MENU button on the unit or the remote control of monitor until you seethe item you wish to adjust.
3. Use the arrow buttons to adjust the value.
4. Press the MENU button to make another adjustment or leave the MENU system.
DVD Functions
Subtitle(SUB-T)
This button is used to select the language for the on-screen display system.(This title menu may vary, depending on the particular DVD.)
[DVD]
OSD
1 / 2
Title
Slow( )
Used to display the title menu of the loaded DVD disc.This function is only present on discs which support it.
[DVD]
[DVD]/[VCD] CONDITION
1 / 4
1 / 8
2X slow forward
4X slow forward
8X slow forward
Use this button to play a disc in slow-forward orslow-reverse. Slow playback can be done at fivedifferent speeds. Pressing this button repeatedlydecreases the speed in steps. Pressing a sixthtime returns playback to the normal speed. 1 / 16
1 / 2
1 / 4
1 / 8
1 / 16
Play
16X slow forward
2X slow rewind
4X slow rewind
8X slow rewind
16X slow rewind
Play
1 / 32 32X slow forward
1 / 32 32X slow rewind
50
50
DVD Functions
Display
Pressing the DISPLAY on theremote control changes the play mode asfollows:
button
[DVD]
OSD CONDITION
Title Elapsed
Title Remain
Chapter Elapsed
Display the Title Elapsed
Display the Title Remain
Display the Chapter Elapsed
[VCD]
Whenever press the button,title chapterwill be displayed as follows:
Pressing the display button displaysinformation about the current CD on thescreen as follows:
[AUDIO]
OSD CONDITION
Single Elapsed
Single Remain
Display the single elapsed
Display the single remain
Display the total elapsed
[MP3]Your DVD player will display the counterautomatically when you play the MP3 disc.
Number Buttons
The 0 through 9 number buttons are used to enter the number of the track, the numberof the DVD chapter, the time, the date, etc.
OSD CONDITION
Single Elapsed
Single Remain
Display time
Left display time
No sign
Chapter Remain
Display Off
Display the Chapter Remaining
No sign
Display Off
Total Elapsed
Total Remain Display the total remaining
[DVD]
Select a track by pressing thecorresponding number button.
[AUDIO]
You can select a track in the folder bypressing the corresponding number button.
[DVD]
OSD CONDITION
Select Track:__ Select track no
OSD CONDITION
__:__ Select track no
DVD Setup
Setup Menu-Main PageWhen the button is pressed, the setup menu will be displayed as shownbelow. Select the menu category and make changes according to your preferences.
SETUP
1. Press the button if the disc is playing.STOP
2. Press the button to display setup menu.SETUP
3. Use the (arrow and ENTER) buttons to select and set desired settings.
4. Press the button again to turn off the setup menu.SETUP
TV DisplayTV DisplayAngle MarkAngle MarkOSD LangOSD Lang
Screen SaverScreen Saver
PSOnENG
On
Go To General Setup PageGo To General Setup Page
General Setup PageGeneral Setup Page
DVD Functions
Stop( )
In DVD mode, Press STOP to stop playback.To resume playback, press PLAY/PAUSE. Ifyou press STOP and then PLAY/PAUSE twice,the player will begin playback at the firstscene of the movie.
[DVD]/[AUDIO]
In MP3 mode, Pressing STOP will stopaudio playback. Press PLAY/PAUSE to beginplayback of the first title on the disc.
the
[MP3]
Menu
Pressing the SETUP brings up the DVD disc menu. The content of this menu varies,depending on the programming of the disc.
[DVD]
OSD CONDITION
1 Time Press Play Key To Continue Stop
OSD CONDITION
1 Time Stop Stop
Arrows( / / / )
In addition to navigating the various menus, you can use the arrow buttons to define the areaof the screen you want to enlarge in ZOOM mode.
[DVD]
After pressing STOP button, select the desired folder and set the condition by pressingENTER button.
Disc Stop2 Time
Setup
Pressing the SETUP button opens the Setup Menu, where you can make and adjust DVDsettings to suit your equipment and preferences.
[MP3]
DVD Setup
General Setup1. TV Aspect RatioIn the Setup function called TV Display, you set the player to output the video signal at thesame aspect ratio as your monitor. If the monitor is widescreen format, select WIDE.If it is as normal screen (4:3), choose NORMAL/PS (Pan and Scan) or NORMAL L/B(Letterbox).
Normal / PS 4:3 PAN SCANChoose this setting if you want the movie to fill the entire screen.(This might mean that the left and right edges won t be seen)
Normal / LB 4:3Choose this setting if you want to see the movie in its original aspect ratio.(The movie might appear with black bars at the top and bottom of the screen.)
Wide 16:9 WIDE SCREENChoose this setting if your DVD Player is connected to a widescreen TV.(This opition is available only if the disc has a 16:9 display aspect ratio.)
2. Angle ViewingSome DVD discs contain programming which allows youto view a scene from a few different camera angles. Youcan tell when a scene is so recorded when an Angle Markis displayed on the screen. This mark will only appear if youhave enabled the Angle Mark featurein the DVD Setup menu.
On: When selected, the screen will be shown withangle mark.
Off: When selected, no angle mark is shown onthe screen.
3. OSD Language
Use this option to set the OSD language.When selected, change to set the on-screen displaylanguage.
Angle MarkAngle MarkOSD LangOSD Lang
Screen SaverScreen Saver
OnENG
On
Set TV Display ModeSet TV Display Mode
General Setup PageGeneral Setup Page
Normal/LBWide
TV DisplayTV Display PS Normal/PS
OSD LangOSD LangScreen SaverScreen Saver
ENGOn
Set Angle MarkSet Angle Mark
General Setup PageGeneral Setup Page
Off
TV DisplayTV Display PSAngle MarkAngle Mark On On
Screen SaverScreen Saver On
Set OSD LanguageSet OSD Language
General Setup PageGeneral Setup Page
TV DisplayTV Display PSAngle MarkAngle Mark OnOSD LangOSD Lang ENG
English
Korean
French
German
Italian
Spanish
Portuguese
Dutch
English
Korean
French
German
Italian
Spanish
Portuguese
Dutch
DVD Functions
Eject
Audio
Change the audio output format.(A the disc supports available audiotype.)
vailable only if
[DVD]
Changes the audio output format.(Available only of the disc supports available audiotype.)
[VCD]/[AUDIO]
OSD CONDITION
Mute Mute
Mute offMute off
Vol+/Vol-
Use these buttons to adjust the audio output level of the speaker from 0 to 20.
Mute
Press MUTE to turn off the audio part of thecurrently playing program. Press it again toreturn the audio volume to the level at whichyou were last listening.
OSD CONDITION
Play Disc
Pause
Play or Pause( )
When this button is pressed, the disc is ejected. When this button is pressed for morethan 3 seconds, the disc is unconditionally ejected. Use this function if you encounterdifficultly ejecting a disc.
An invalid button press.
[MP3]
OSD CONDITION
2 Channel
5.1 Channel
1 / 2 : Ac3 2CH English
2 / 2 : Ac3 5.1CH English
OSD CONDITION
Stereo
Mono Left
Stereo
Mono Left
Mono Right
Mix Mono
Mono Right
Mix Mono
Whenever this button is pressed, the modeswitches from pause to play or play to pause.
DVD Setup
Audio Setup
4. Screen Saver
The screen saver is useful to prevent your displayfrom becoming damaged. The screen saver pictureappears when you leave the DVD player in stop modefor about two minutes.
Angle MarkAngle MarkOSD LangOSD Lang
OnENG
Screen SaverScreen Saver
General Setup PageGeneral Setup Page
TV DisplayTV Display PS
Go To Speaker Setup PageGo To Speaker Setup Page
Audio Setup PageAudio Setup Page
Speaker Setup
SPDIF Setup
Dolby Digital Setup
Channel Delay
Equalizer
3D Processing
Speaker Setup
SPDIF Setup
Dolby Digital Setup
Channel Delay
Equalizer
3D Processing
OffScreen SaverScreen Saver On On
Dual MonoUse this function to set the input audiosignal to match your speaker setup.
DynamicUse this function to change the settingfrom the factory.
Set DRC OffSet DRC Off
Dual MonoDual Mono STR
Dynamic
Dolby Digital SetupDolby Digital Setup
L-MonoR-Mono
Dual MonoDual Mono Stereo
Mix-Mono
Dolby Digital SetupDolby Digital Setup
Dynamic
FULL
3 / 4
1 / 2
1 / 4
OFF
1. Dolby Digital Setup
Dynamic
Dual Mono (1 + 1) SetupDual Mono (1 + 1) Setup
Dolby Digital SetupDolby Digital Setup
L-MonoR-Mono
Dual MonoDual Mono STR Stereo
Mix-Mono
DVD Setup
Show below are two examples of Audio Setups.
Go To Dolby Digital SetupGo To Dolby Digital Setup
Audio Setup PageAudio Setup Page
Speaker Setup
SPDIF Setup
Dolby Digital Setup
Channel Delay
Equalizer
3D Processing
Speaker Setup
SPDIF Setup
Dolby Digital Setup
Channel Delay
Equalizer
3D Processing
Set Stereo SetupSet Stereo Setup
STR
Go To Equalizer PageGo To Equalizer Page
Audio Setup PageAudio Setup Page
Speaker Setup
Spdif Setup
Dolby Digital Setup
Channel Delay
Equalizer
3D Processing
Speaker Setup
Spdif Setup
Dolby Digital Setup
Channel Delay
Equalizer
3D Processing
2. Equalizer Settings
Bass BoostBass BoostSuper BassSuper BassTreble BoostTreble Boost
OffOffOff
Select Equalizer TypeSelect Equalizer Type
Equalizer PageEqualizer Page
RockPopLiveDanceTechno
ClassicSoft
EQ TypeEQ Type None None
DVD Setup
Password Setup1. Password Mode
In the Password setup, you must first enter the current 6-digit passcode, andthen you have the opportunity to change it. The factory default passcode is .Once you have changed and confirmed the password, press the ENTER button.
136900
2. Password Change
Password
Password ModePassword Mode
Password Setup PagePassword Setup Page
OffPassword Mode OnPassword Mode On On
Change PasswordChange Password
Password Setup PagePassword Setup Page
Password Mode OnPassword Mode On OnPassword Change Old Password
New Password
Confirm PWD
OK
Password Setup, which is required for using the Parental Controls settings,is divided into two modules: Turning on the Password function, and settinga Password. The first step is to turn it on in the Password Mode setting.
Please Enter Old PasswordPlease Enter Old Password
DVD Setup
EQ Equalizer TypeIn this menu you can choose the desired presetequalizer mode.
(Choose from Rock, Pop, Live, Dance, Techno,Classic or Soft)
Bass BoostThe Bass Boost function increases the volumelevel of the bass frequencies.
Super BassSuper Bass Boost further increases the volumelevel of the bass frequencies.
Treble BoostTreble Boost increases the volume level of the upperfrequencies.
Bass BoostBass BoostSuper BassSuper BassTreble BoostTreble Boost
OffOffOff
Select Equalizer TypeSelect Equalizer Type
Equalizer PageEqualizer Page
RockPopLiveDanceTechno
ClassicSoft
EQ TypeEQ Type None None
Super BassSuper BassTreble BoostTreble Boost
OffOff
Boss BoostBoss Boost
Equalizer PageEqualizer Page
EQ TypeEQ Type None
OffBass BoostBass Boost Off On
Treble BoostTreble Boost Off
Super BassSuper Bass
Equalizer PageEqualizer Page
EQ TypeEQ Type None
Off
Bass BoostBass Boost OffOnSuper BassSuper Bass Off
Treble BoostTreble Boost
Equalizer PageEqualizer Page
EQ TypeEQ Type None
Off
Bass BoostBass Boost Off
OnSuper BassSuper Bass OffTreble BoostTreble Boost Off
DVD Setup
Use the Disc Menu option to select the displaylanguage for a DVD s disc menu display language.(not the same as the players menu)
1. Press the SETUP button during stop mode.2. Press the / buttons to move to Preference.3. Press the / buttons to move to Disc Menu.4. Press the ENTER button.5. Press the / buttons to select Disc Menu.
5. Disc Menu
The Parental Control settings limit the player to only play content at or below a certainmovie rating. The ratings systems in different countries vary. In the USA, the MotionPicture Association of America(MPAA) rates movies as G, PG, PG-13, etc.In this menu item, you can set what is the highest level of rating you wish to allow theunit to play.
1. Press the SETUP button when stop mode.2. Press the / buttons to move to Preference.3. Press the / buttons to move to Parental.4. Press the ENTER button.5. Press the / buttons to select desired
parental level.
6. Parental
If you select RESET when in the DEFAULT settingsmode, all the settings of the Setup Menu will bereturned to the factory defaut settings, except forParental Level, Region and Password values.
1. Press the SETUP button when stop mode.2. Press the / buttons to move to Preference.3. Press the / buttons to move to Default.4. Press the ENTER button to select Reset.
7. Default
PBCAudioSubtitle
OnENG
Preferred Menu LanguagePreferred Menu Language
Preference PagePreference Page
FrenchSpanish
TV TypeTV Type Ntsc English
ParentalDefault
JapaneseKorean
Chinese
ThaiRussian
Disc MenuDisc Menu ENG
PBCAudioSubtitle
OnENG
Load Factory SettingLoad Factory Setting
Preference PagePreference Page
TV TypeTV Type Ntsc
Disc MenuDisc Menu ENGParental
ResetDefault
PBCAudioSubtitle
OnENG
Set Parental ControlSet Parental Control
Preference PagePreference Page
TV TypeTV Type Ntsc 1 KID SAF
2 G
3 PG
4 PG 13
5 PGR
6 R
7 NC17
8 ADULT
1 KID SAF
2 G
3 PG
4 PG 13
5 PGR
6 R
7 NC17
8 ADULT
ParentalDefault
Disc MenuDisc Menu ENG
DVD Setup
Video Setup
Sharpness can be adjusted by highlighting it in the menu and then using theUP/DOWN arrow buttons to increase or decrease the sharpness.
In the Video Setup, you can make adjustments to various elements of the picture quality.
BrightnessContrastGamma
0000None
Color
Video Quality SetupVideo Quality Setup
MediumLow
Color MID High
HueSaturationLuma DelayLuma Delay
00001 T1 T
Picture Quality
Video Setup PageVideo Setup Page
Component YUV
Quality
Divx VOD
Component YUV
Quality
Divx VOD
Go TO Video Quality Setup PageGo TO Video Quality Setup Page
BrightnessContrastGamma
0000None
Color
Video Quality SetupVideo Quality Setup
MediumLow
Color MID High
HueSaturationLuma DelayLuma Delay
00001 T1 T
BrightnessUse this option to adjust the display brightness. When you reach desiredbrightness level, use the / buttons and press the ENTER button.
Video Quality SetupVideo Quality Setup
HueSaturationLuma DelayLuma Delay
00001 T1 T
Brightness
Brightness 0
BrightnessContrastGamma
0000None
Color MID
Brightness
DVD Setup
Preference1. TV TypeChoose the proper TV format appropriate to themonitor you have connected to the player fromthe following: NTSC, PAL or Multi type.
1. Press the SETUP button during stop mode.2. Press the / buttons to move to Preference.3. Press the / buttons to move to TV Type.4. Press the ENTER button.5. Press the / buttons to select TV Type.
2. PBC (Play Back Control)This feature is only available when a SVCD discis loaded. It allows you to disable or enable thePBC (Play Back Control) menu of VCD discs.
1. Press the SETUP button during stop mode.2. Press the / buttons to move to Preference.3. Press the / buttons to move to PBC.4. Press the ENTER button.5. Press the / buttons to select TV TypeOn/Off.
3. AudioUse the audio language menu to select the subtitlelanguage that you prefer. If the disc you are playinghas that language available, it will display subtitlesin that language.
1. Press the SETUP button during stop mode.2. Press the / buttons to move to Preference.3. Press the / buttons to move to Audio.4. Press the ENTER button.5. Press the / buttons to select desired
audio language.
4. SubtitleIn the Subtitle menu, you can select a subtitlelanguage. Please note that subtitle will onlyappear in this language if the disc programminghas included it.
1. Press the SETUP button during stop mode.2. Press the / buttons to move to Preference.3. Press the / buttons to move to Subtitle.4. Press the ENTER button.5. Press the / buttons to select desired
subtitle.
PBC
Subtitle
On
Preferred Audio LanguagePreferred Audio Language
Preference PagePreference Page
FrenchSpanish
TV TypeTV Type Ntsc English
ParentalDefault
JapaneseKorean
Chinese
ThaiRussian
Disc MenuDisc Menu ENG
Audio ENG
PBCAudio
OnENG
Preferred Subtitle LanguagePreferred Subtitle Language
Preference PagePreference Page
FrenchSpanish
TV TypeTV Type Ntsc
ParentalDefault
JapaneseKorean
Chinese
RussianDisc MenuDisc Menu ENG
Subtitle
Thai
Others
Thai
Others
AudioSubtitle
ENG
Set PBC StateSet PBC State
Preference PagePreference Page
TV TypeTV Type NtscOn
ParentalDefault
Disc MenuDisc Menu ENG
Off
PBC On
PBCAudioSubtitle
OnENG
Set TV StandardSet TV Standard
Preference PagePreference Page
ParentalDefault
Disc MenuDisc Menu ENG
PALMultiNTSC
TV TypeTV Type Ntsc
Contrast
Use this option to adjust the contrast level.Use the / buttons and press the ENTER button, when you reach thedesired contrast level. The contrast control increases or decreases the ratio ofbright and dark screen sections.
Brightness
Gamma
00
None
Contrast
Video Quality SetupVideo Quality Setup
Color MID
HueSaturationLuma DelayLuma Delay
00001 T1 T
Contrast 00
Contrast
Contrast 0
DVD Setup
Gamma
HueSelect screen hue level using the direction / buttons and press the ENTER button.
BrightnessContrast
0000
Gamma
Video Quality SetupVideo Quality Setup
MediumLow
Color MID
HueSaturationLuma DelayLuma Delay
00001 T1 T None
Gamma None High
BrightnessContrast
0000
Hue
Video Quality SetupVideo Quality Setup
Color MID
SaturationLuma DelayLuma Delay
001 T1 T
Gamma NoneHue 00
Hue
Hue 0
In some systems, you might experience a loss in the strength of the dark sections ofthe displayed picture. This can be helped by changing the Gamma setting, whichboosts the dark level but leaves the other levels unchanged.
DVD Setup
SaturationSelect screen saturation level using the direction / buttons and press theENTER button.
Luma DelaySelect the Luma Delay menu and select the preferred video image quality.
BrightnessContrast
0000
Saturation
Video Quality SetupVideo Quality Setup
Color MID
Luma DelayLuma Delay 1 T1 T
Gamma NoneHue 00Saturation 00
Saturation
Saturation 0
BrightnessContrast
0000
Luma DelayLuma Delay
Video Quality SetupVideo Quality Setup
Color MID
Gamma NoneHue 00Saturation 00Luma DelayLuma Delay 1 T1 T 0T
1 T1 T
POWER ACOUSTIK AUDIO ACCESSORIES CAR AUDIO ACCESSORIES