Topic:
New Technological Solutions to ImproveThe Injection Moulding Process
POST
WEB
INAR
REP
ORT
www.plasticsandrubberindonesia.com Plastics & Rubber Indonesia Plastics & Rubber Indonesia
PLASTICS & RUBBER INDONESIA
Tech-Talk
Organised by: Webinar Sponsored by:
Tuesday, 15 September 2020 | 10.00 am (WIB/GMT+7)
REGISTRATION & ATTENDEES
495Registrant
266Attendees
54%Attendance Rate
REGISTRANT DEMOGRAPHIC8 Countries / Regions• Bangladesh • China
• India • Indonesia
• Japan • Portugal
• Singapore• Republic of Korea
TECH-TALK WEEK @PLASTICS & RUBBER INDONESIAInjection molding is a process used in manufacturing parts or mechanical components in a process that involves material injection into a mold. It’s a versatile process that has made production of low cost and high cost plastic parts easy.
There have been advancements in the world of injection molding and some of the new technologies in the world of injection molding, in this opportunity PT. Pamerindo Indonesia has successfully held a webinar with its estemmed speakers used this platform to cover all new advancements in Injection Molding- Injection using gas; Injection using foam; Thin-wall method and Multi-component method.
Taking the theme of New Technological Solutions to Improve The Injection Moulding Process, the webinar took place on Tuesday, 15 September 2020, at 10.00 WIB (am/GMT+7) and was run by key players in the industry:
Paulus B. NapitupuluSenior Advisor for Indonesia Mold and
Dies Industry Association (IMDIA)
Ir. Hendro Sat Setijo Tomo, M.SiSpecialist Injection Molding, Balai
Teknologi Polimer – BPPT
Tjen Khin YauDirector – PT. Catur Putra Makmur
Sejahtera
THE AGENDA
Tuesday, 15 September 2020 | 10.00 am (WIB/GMT+7)
10.00 – 10.05 Welcome and introduction hosted by PT Pamerindo Indonesia
10.10 – 10.25 Association Insight: Paulus B. Napitupulu - Senior Advisor, Indonesia Mold & Dies Industry Association (IMDIA)
10.30 – 10.35 First polling and general information
10.40 – 10.55 Industry View: Ir. Hendro Sat Setijo Tomo, M.Si – Specialist Injection Molding, Balai Teknologi Polimer – BPPT
11.00 – 11.05 Second polling and general information
11.10 – 11.25 Industry View: Tjen Khin Yau – Director, PT. Catur Putra Makmur Sejahtera
11.30 – 12.00 Q&A and wrap up
PLASTICS & RUBBER INDONESIA
Tech-Talk
PLASTICS & RUBBER INDONESIA
Tech-Talk
135 minutesDuration
91.8% AttendeesStay in 1 - 1,5 Hour Session
INTERACTION RATE (How long attendee stay on our session)
91.80%wish to get update onnext webinar
4.10%would like to join as speaker
4.10%wish to know more on sponsorship package
POLLING PARTICIPANTS
58 Questionsasked during the webinar
TOP CHARACTERISTIC QUESTIONS ASKED*:
• Injection new trend/drop injection molding: material polymer apa saja yang bisa diproses dan parameter proses mesin apa saja yang penting dalam kontrol tersebut?• Critical parameter apa yang sangat berpengaruh di Injection Moulding terhadap kekuatan product dalam uji hydrostatic pressure test?• Apakah ada ketentuan khusus untuk proses inject dengan menggunakan material PET selain hanya melihat diagram PvT? Apakah ada metode yang bisa digunakan untuk mencegah slip?• Mohon sharing diagram PvT pada polimer PPR dan PVC dan PvT setting.• Aplikasi supply chain sampah plastik daur ulang, apakah mesin Catur Putra Makmur Sejahtera bisa menggunakan material hasil daur ulang?• Dalam pemilihan mesin blow moulding, apa yang harus di perhatikan untuk membuat bioplastic - apakah mesinnya sama dengan membuat plastik biasa?
* Looking for more questions that relate to your current situation or curious about the above answers? Find it out from our recorded video www.plasticsandrubberindonesia.com
REGISTRANT BY JOB TITLE & POSITION8.6%
3.8%
6.4%
7.5%
16.5%
3.4%
1.1%1.5%
2.6%
2.6%
2.6%
2.3%
3.8%0.8%
1.9%
10.2%
12%
12.4%
Account and Admin
CEO
Director
Lecturer
Engineer (technical service, tool & die, material & recipe,
laboratory technician, product application, mold designer)
Executive Officer
Workshop, Maintenance, and Factory Manager
General Manager
Operational, Mechanic
Managing Director
Marketing
Other (student, consultant, government, media)
Owner
Packaging Development
Procurement
QA, QC, Production
R&D
Sales
PLASTICS & RUBBER INDONESIA
Tech-Talk
CALLING FOR SPEAKERS!JOIN US AND SHARE YOUR EXPERIENCEThe industry needs your experience and moreover it’s time for the industry to rise and shine together! We need your expertise and support to share the information. Contact our nearest sales representative and they will inform you of the next steps and the benefit of joining Plastics & Rubber Indonesia Tech-Talk Webinar.
See you on e-stage!
TECHNICAL INFOOur webinar will be conducted using a presentation with an audio format. After you complete your registration, you will receive an automatic confirmation email with details for joining our webinar. As you build your future information and experience, you can check the recording webinar video and download the presentation material, a minimum of 2 working days after the webinar is done.
For further information please contact your nearest office:
ORGANISERINDONESIA Wiwiek Roberto +62 21 2525 320 [email protected]
INTERNATIONAL SALES OFFICEASIA Jeffrey Au +65 6233 6688 [email protected]
INTERNATIONAL SALES OFFICELONDON Marek Szandrowski +44 20 7560 4321 [email protected]
www.plasticsandrubberindonesia.com/visiting/webinar/
WHAT’S NEXT*23 October 2020 | 10 AM (WIB/GMT+7) Technology Showcase
26 November 2020 | 10 AM (WIB/GMT+7) Opportunities and Challenges in The Increased Use of Recycled Plastics
11 December 2020 | 10 AM (WIB/GMT+7) The Innovation in Plastics & Rubber Processing
*Subject to change without prior notice.