Orchestra Circle 2756LED Maxi Ceiling Mount
MODEL VOLT SHIELD DIFFUSER COLOR
2756 120*
208
240
277
347+
PF perforated liner
RF*
CL
frost
clearWT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsSupport Frame: Heavy aluminum plate. Hinge/Lock up: Pressure die cast aluminum. Ceiling canopy / Reflector disk: Aluminum sheet, die formed. Diffusers (side): Thermo-formed acrylic. Bottom lens: Acrylic. Fasteners: Stainless steel.
Electrical ComponentsDriver: Constant current 900mA, 84% efficiency. Light engine: COB 1208 24mm x 20mm with a 15mm LES.
This luminaire is designed to mount to a recessed 4" octagon j-box (by others). Remote mounted driver assemblies are standard (consult factory for lamp to ballast distance). Optional integral driver assemblies are offered. For wet locations luminaire must be restrained from wind action. Special hanger or restraint required (by others).
Luminaire has a choice of frost or clear lens and diffuser, with frost supplied as standard. The perforated liner is supplied if specified. The reflector disk is fixed in the top position. Standard optic, Type V square (130°).
The Orchestra ceiling mount is listed for use in damp locations to UL and CSA standards. An optional wet location label can be provided.
LEDs are rated for 50,000 hour life with lumen maintenance >70% (L70).
www.rebellelighting.com© 2015 REBELLE All rights reserved. R15 Specifications subject to change without notice.
INTERIOR
6" DIA.
17.75" 19.75"
OPTIONS
C86
WL
DIM
90
ball aligner hanger
wet location listing
dimmingdriver
90 CRI
*Standard configuration unless otherwise specified ¹Delivered lumens based on PF option and standard frost diffuser (4000K, 80CRI) +Consult factory
SAMPLE CATALOG NUMBER: 2756 - 32L40 - 120 - RF - REM - WTUsing this catalog number would order 1 model 2756 maxi circle ceiling mount luminaire with 4000K, 80 CRI LED light engine at 120 volts with frosted acrylic lens andremote driver, painted with white texture polyester powder coat.
10" 19"
13.125"
Integral driver option, shown without reflector disk
remote driver
integral driver
DRIVER LOCATION
REM*
INT
LEDWATTS
32L2612 lumens¹32w LED/38w system
COLOR TEMPERATURE
404000K
303000K
353500K
1
3
45
6
7
8
9
Driver - 900 ma. (Remote Mounted)
Recessed Octagon J-Box (By Others)
Canopy Assembly with Hangstraight Swivel
Frame Support .250" Aluminum
Downlight LED Light Engine with Silicone Optic and Heat Sink
Acrylic Lens .375" Thick
Diecast Aluminum Lock Up
Acrylic Cylinder (.125" Thick)
Reflector Disk .102" Aluminum(Fixed - Top Position)
1
2
3
4
5
6
7
8
9
Orchestra Circle 2756LED Detailed Product Description
Remote Driver Configuration
www.rebellelighting.com© 2015 REBELLE All rights reserved. R15 Specifications subject to change without notice.
2
14.69"
www.rebellelighting.com © 2015 REBELLE All rights reserved. R15 Specifications subject to change without notice.
3.87"
4.31"
3.75"
Ø11"
4"
Ø.25"(4)
6"
Integral Driver Canopy Dimensions
Orchestra Circle 2756LED Maxi Ceiling Mount
Remote Driver Dimensions
Orchestra Circle 2756ALED Maxi Single Streetscape Post Arm
MODEL VOLT SHIELD DIFFUSER COLOR
2756A 120*
208
240
277
347+
PF perforated liner RF*
CL
frost
clear
OPTIONS
DIM
T2
T3
90
dimming driver
type II optic
type IIIoptic
90 CRI
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsSupport frame: Heavy aluminum plate. Hinge/Lock up: Pressure die cast aluminum. Mounting arm bracket: Extruded aluminum. Reflector disks / Lampholder cover: Aluminum sheet, die formed. Diffusers (side): Thermo-formed acrylic. Bottom lens:Acrylic.
Electrical ComponentsDriver: Constant current 900 mA, 84% efficiency. Light engine: COB 1208 24mm x 20mm with a 15mm LES.
Luminaire is designed to slip fit a 4" OD pole top OD tenon (4" long). Three 1/4 - 20 stainless steel set screws lock ballast compartment to pole or tenon.
Luminaire has a choice of frost or clear lens and diffuser, with frost supplied as standard. The perforated liner is supplied if specified. The reflector disk is fixed in the top position. Standard optic, Type V square (130°).
The Orchestra maxi single post arm is listed for use in wet locations to UL and CSA Standards. Windloading EPA = 1.86 sq ft.
LEDs are rated for 50,000 hour life with lumen maintenance >70% (L70).
www.rebellelighting.com© 2015 REBELLE All rights reserved. R15 Specifications subject to change without notice.
EXTERIOR
17.75"
18.25"
24"
*Standard configuration unless otherwise specified ¹Delivered lumens based on PF option and standard frost diffuser (4000K, 80CRI) +Consult factory
SAMPLE CATALOG NUMBER: 2756A - 32L40 - 120 - RF - WTUsing this catalog number would order 1 model 2756A single post arm luminaire with 4000K, 80 CRI LED light engine at 120 volts with frosted acrylic lens, painted with white texture polyester powder coat. Poles are supplied separately.
25"
13.125"
LEDWATTS
32L2612 lumens¹32w LED/38w system
COLOR TEMPERATURE
404000K
303000K
353500K
1
2
4
5
7
8
9
3
Mounting Arm Bracket - 2" x 4" x .100" Thick Extruded AluminumFrame Support .250" AluminumLED Light Engine with Silicone Optic and Heat Sink Acrylic Lens .375" ThickDiecast Aluminum Lock Up
Driver - 900 mAPole (Not Included) Ø4.0"Reflector Disk .102" Aluminum (Top Position - Fixed)Acrylic Cylinder (.125" Thick)
12345
6789
Orchestra Circle 2756ALED Detailed Product Description
6
www.rebellelighting.com© 2015 REBELLE All rights reserved. R15 Specifications subject to change without notice.
Orchestra Circle 2756A2LED Maxi Twin Streetscape Post Arm
MODEL VOLT SHIELD DIFFUSER COLOR
2756A2 120*
208
240
277
347+
PF perforated liner RF*
CL
frost
clear
OPTIONS
DIM
T2
T3
90
dimming driver
type IIoptic
type IIIoptic
90 CRI
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsSupport frame: Heavy aluminum plate. Hinge/Lock up: Pressure die cast aluminum. Mounting arm bracket: Extruded aluminum. Reflector disks / Lampholder cover: Aluminum sheet, die formed. Diffusers (side): Thermo-formed acrylic. Bottom lens: Acrylic.
Electrical ComponentsDriver: Constant current 900mA, 84% efficiency. Light engine: COB 1208 24mm x 20mm with a 15mm LES.
Luminaire is designed to slip fit a 4" OD pole top OD tenon (4" long). Three 1/4 - 20 stainless steel set screws lock ballast compartment to pole or tenon.
Luminaire has a choice of frost or clear lens and diffuser, with frost supplied as standard. The perforated liner is supplied if specified. The reflector disk is fixed in the top position. Standard optic Type V square (130°).
The Orchestra maxi twin post arm is listed for use in wet locations to UL and CSA Standards. Windloading EPA = 3.72 sq ft.
LEDs are rated for 50,000 hour life with lumen maintenance >70% (L70).
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
EXTERIOR
17.75"
10" 24"
*Standard configuration unless otherwise specified ¹Delivered lumens per head based on PF option and standard frost diffuser (4000K, 80CRI) +Consult factory
SAMPLE CATALOG NUMBER: 2756A2 - 32L40 - 120 - RF - WTUsing this catalog number would order 1 model 2756A2 twin post arm luminaire with two 4000K, 80 CRI LED light engines at 120 volts with frosted acrylic lens, painted with white texture polyester powder coat. Poles are supplied separately.
18.25"
48.5"
13.125"
LEDWATTS
32L2612 lumens¹32w LED/38w system
COLOR TEMPERATURE
404000K
303000K
353500K
Orchestra Circle 2756A2LED Detailed Product Description
www.rebellelighting.com© 2015 REBELLE All rights reserved. R15 Specifications subject to change without notice.
1
2
4
5
7
8
9
3
6
Mounting Arm Bracket - 2" x 4" x .100" Thick Extruded AluminumFrame Support .250" AluminumLED Light Engine with Silicone Optic and Heat SinkAcrylic Lens .375" ThickDiecast Aluminum Lock Up
Driver - 900 mAPole (Not Included) Ø4.0"Reflector Disk .102" Aluminum (Fixed - Top Position)Acrylic Cylinder (.125" Thick)
12345
6789
Orchestra Circle 2756BLED Maxi Streetscape Bollard
MODEL VOLT SHIELD DIFFUSER COLOR
2756B 120*
208
240
277
347+
PF perforated liner RF* frost WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsFrame support: Aluminum plate. Bollard shaft: Extruded aluminum. Base plate: 0.500" aluminum plate welded to shaft. Diffusers (side): Thermo-formed polycarbonate. Internal reflector / Glare guard / Lampholder cover: Aluminum sheet, die formed. Fasteners: Stainless steel with nickel plated cap nuts. Anchor bolts: Hot dipped, galvanized nuts, bolts and washers.
Electrical ComponentsDriver: Constant current 900 mA, 84% efficiency, IP66 rated. LED: COB 1208 24mm x 20mm with a 15mm LES, 80 CRI standard.
Luminaire is designed to attach to a poured concrete foundation using anchor bolts, template and hardware provided. Design of concrete base is by others. A square base cover is provided as an optional extra.
The Orchestra maxi bollard is listed for use in wet locations to UL and CSA Standards.
LEDs are rated for 50,000 hour life with lumen maintenance >70% (L70).
www.rebellelighting.com© 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.
EXTERIOR
13.125"
16"
10" 12"
26"
OPTIONS
RD
BCS
DIM
90
reflector disk
base cover - square
dimming driver
90 CRI
*Standard configuration unless otherwise specified ¹Delivered lumens based on PF option and standard frost diffuser (4000K, 80 CRI) +Consult factory
SAMPLE CATALOG NUMBER: 2756B - 32L40 - 120 - RF - WTUsing this catalog number would order 1 model 2756B maxi streetscape bollard with a 4000K, 80 CRI LED light engine at 120 volts with frosted polycarbonate lens and painted with white texture polyester powder coat.
10"
12"
42"
10"
Luminaire has a frosted lens with an optional perforated liner. A silicone optic provides high optical efficiency, excellent transparency, type V distribution and a sealed (IP65) optical compartment protecting COB LED. The reflector disks are made as an optional extra on the bollard since the disk would be prone to vandalism on a bollard in a public space.
LED
32L2612 lumens¹32w LED/38w system
40*
35
30
4000K
3500K
3000K
COLOR TEMPERATUREWATTS
1
10"
2
3
4
.250" Aluminum Frame Support
LED Light Engine with Silicone Optic and Heatsink.125" Polycarbonate Lens
Driver - 900 mA
1
23
4
Orchestra Circle 2756BLED Detailed Product Description
www.rebellelighting.com© 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.
Orchestra Circle 2756PLED Maxi Pendant Mount
MODEL VOLT SHIELD DIFFUSER COLOR
2756P 120*
208
240
277
347+
PF perforated liner
RF*
CL
frost
clear
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsSupport Frame: Heavy aluminum plate. Hinge/Lock up: Pressure die cast aluminum. Glare guard / Ceiling canopy / Reflector disk: Aluminum sheet, die formed. Diffusers (side): Thermo-formed acrylic. Bottom lens: Acrylic. Fasteners: Stainless steel.
Electrical ComponentsDriver: Constant current 900mA, 84% efficiency. Light engine: COB 1208 24mm x 20mm with a 15mm LES.
This luminaire is designed to mount to a recessed 4" octagon j-box (by others). Remote mounted driver assemblies are standard (consult factory for lamp to driver distance). Optional integral driver assemblies are offered. For wet locations luminaire must be restrained from wind action. Special hanger or restraint required (by others).
Luminaire has a choice of frost or clear lens and diffuser, with frost supplied as standard. The perforated liner is supplied if specified. The reflector disk is fixed in top position.Standard optic, Type V square (130°).
The Orchestra maxi pendant is listed for use in damp locations to UL and CSA Standards. An optional wet location label can be provided.
LEDs are rated for 50,000 hour life with lumen maintenance >70% (L70).
www.rebellelighting.com© 2015 REBELLE All rights reserved. R15 Specifications subject to change without notice.
INTERIOR
6" dia.
17.75"
OPTIONS
P( __")
C86
WL
DIM
90
pendant length
ball aligner hanger
wet location listing
dimming driver
90 CRI
*Standard configuration unless otherwise specified ¹Delivered lumens based on PF option and standard frost diffuser (4000K, 80 CRI) +Consult factory
SAMPLE CATALOG NUMBER: 2756P - 32L40 - 120 - RF - REM - WTUsing this catalog number would order 1 model 2756P maxi circle pendant with 4000K, 80 CRI LED light engine at 120 volts with frosted acrylic lens and remote mounted driver, painted with white texture polyester powder coat.
10" 19"
13.125"
remote driver
integral driver
DRIVER LOCATION
REM*
INT
LEDWATTS
32L2612 lumens¹32w LED/38w system
COLOR TEMPERATURE
404000K
303000K
353500K
Orchestra Circle 2756PLED Detailed Product Description
Remote Driver Configuration
www.rebellelighting.com© 2015 REBELLE All rights reserved. R15 Specifications subject to change without notice.
Driver - 900 mA (Remote Mounted)
Canopy Assembly with Hangstraight Swivel
Frame Support .250" Aluminum
LED Light Engine with Silicone Optic and Heat Sink
Acrylic Lens .375" Thick
Diecast Aluminum Lock Up
Acrylic Cylinder (.125" Thick)
Reflector Disk .102" Aluminum(Fixed Top Position)
1
2
3
4
5
6
7
8
2
34
5
6
7
8
1
14.69"
www.rebellelighting.com © 2015 REBELLE All rights reserved. R15 Specifications subject to change without notice.
3.87"
4.31"
3.75"
Ø11"
4"
Ø.25"(4)
6"
Integral Driver Canopy Description
Orchestra Circle 2756PLED Maxi Pendant Mount
Remote Driver Description
Orchestra Circle 2756SLED Maxi Wall Sconce
MODEL LED VOLT SHIELD DIFFUSER COLOR
2756S 120*
208
240
277
347+
PF perforated liner RF* frost
OPTIONS
DIM
EM
dimmingdriver
emergency battery
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsSupport frame: Heavy aluminum plate. Hinge/Lock up: Pressure die cast aluminum. Reflector disk: Aluminum sheet, die formed. Diffusers (side): Thermo-formed acrylic. Bottom lens: Acrylic. Fasteners: Stainless steel.
Integral Driver: Constant current, 350ma. LED module: >82CRI.
Designed for wall mounting over a 4" octagonal j-box. A heavy gauge mounting plate is attached to the j-box. Unit hooks on to the mounting plate and is secured with two stainless steel set screws. Silicone seal is required across the top of the housing and down each side to exclude moisture in exterior applications.
Frosted outer diffuser, available with or without perforated metal liner to provide for glare control. The reflector disk re-directs stray light and can be adjusted in the field to three positions - top, middle and bottom. Lumen multiplier 3500K - 0.925, 3000K - 0.896.
The Orchestra maxi wall sconce is listed for use in wet locations to UL and CSA Standards. (LOC 4, wall surface)
LEDs are rated for 50,000 hour life with lumen maintenance >70% (L70).
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
EXTERIOR/INTERIOR
13.125"
17.75"
10"
15.5"
*Standard configuration unless otherwise specified ¹Delivered lumens, 4000K +Consult factory
SAMPLE CATALOG NUMBER: 2756S - 22L - 40 - 120 - RF - WTUsing this catalog number would order 1 model 2756S maxi wall sconce with 18 watt 4000K temperature LED module wired to 120 volts with a frosted acrylic lens painted with white texture polyester powder coat.
16"
COLOR TEMPERATURE
22L 40
35
30
4000K
3500K
3000K
LED module1800 lumens¹
2
3
4
5
6
7
9 Ø.375" (4)8"
10"
Ø.875"
Mounting Plate
1
8
LED Boards with Heat SinkFrame Support .250” Aluminum Acrylic Lens .375” ThickDiecast Aluminum Lock UpJ-Box (By Others)
Mounting Plate .102” AluminumDriver - Constant CurrentLight Frost or Clear Acrylic Lens .125" ThickReflector Disk .102" Aluminum (3 Position Adjustable)
12345
6789
Orchestra Circle 2756SLED Detailed Product Description
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Orchestra Circle 2756SL LED Maxi Linear Wall Sconce
MODEL LED VOLT DIFFUSER COLOUR
2756SL 44LLED module3800 lumens1
COLOR TEMPERATURE
120*
208
240
277
347+
RF frost WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsSupport frame: Heavy aluminum plate. Hinge/Lock up: Pressure die cast aluminum. Reflector disk: Aluminum sheet, die formed. Diffusers (side): Thermo-formed acrylic. Bottom lens: Acrylic. Fasteners: Stainless steel.
Electrical ComponentsDriver: Constant current high efficiency 700ma. LED module: >82CRI.
Designed for wall mounting over a 4" octagonal j-box. A heavy gauge mounting plate is attached to the j-box. Unit hooks on to the mounting plate and is secured with two stainless steel set screws. Silicone seal is required across the top of the housing and down each side to exclude moisture in exterior applications.
Frosted outer diffuser with an optional perforated metal liner to provide for glare control. The solid reflector disk can be positioned - top, middle or bottom to direct light appropriately for the intended use. Lumen multiplier for 3500K - 0.925, 3000K - 0.896.
The Orchestra maxi wall sconce is NRTL listed for use in wet locations to UL and CSA Standards.
LEDs are rated for 50,000 hour life with lumen maintenance >70% (L70).
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
EXTERIOR
SHIELD
PF perforated liner
OPTIONS
DIM
EM
dimming driver
emergency battery
*Standard configuration unless otherwise specified +Consult factory 1Delivered, 4000K
SAMPLE CATALOG NUMBER: 2756SL - 44L - 40 - 120 - RF - WTUsing this catalog number would order 1 model 2756SL maxi linear LED wall sconce with 44 watt, 4000K LED module wired to 120 volts with frosted acrylic lens, painted with white texture polyester powder coat.
13.125"
36"
10"
15.5"
16"
40*
35
30
4000K
3500K
3000K
1
2
3
4
5
9
6
7
8
Frame Support .250" Aluminum
LED Boards with Heat Sink
Reflector Disk .102" Aluminum (3 Position Adjustable)
Acrylic Lens .125" Thick
Acrylic Lens .375" Thick
Diecast Aluminum Lock Up
4" Recessed Octagon J-Box (By Others)
Mounting Plate .102” Aluminum
Driver - Constant Current
1
2
3
4
5
6
7
8
9
Orchestra Circle 2756SL Detailed Product Description
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Mounting Plate
8"
Ø2.0"
Ø.375"
13"
13"
Orchestra Circle 2756TLED Maxi Streetscape Post Top
MODEL VOLT SHIELD DIFFUSER COLOR
2756T 120*
208
240
277
347+
PF perforated liner RF*
CL
frost
clear
OPTIONS
DIM
T2
T3
90
dimmingdriver
type IIoptic
type IIIoptic
90 CRI
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsSupport frame: Heavy aluminum plate. Hinge/Lock up: Pressure die cast aluminum. Reflector disks / Reflector / Lampholder cover: Aluminum sheet, die formed. Diffusers (side): Thermo-formed acrylic. Pole fitter: 4.5" OD x 12" long, aluminum. Bottom plate: Aluminum.
Electrical ComponentsDriver: Constant current 900 mA, 84% efficiency. Light Engine: COB 1208 24mm x 20mm with a 15mm LES.
Unit is designed to fit a 4" OD, 1/8" wall pole with an inside diameter of 3.75" minimum. Three 1/4 - 20 stainless steel set screws lock the head to the pole.
Luminaire has a choice of frost or clear lens and diffuser, with frost supplied as standard. The perforated liner is supplied if specified. The reflector disk is fixed in top position.Standard optic, Type V square (130°).
The Orchestra maxi post top is listed for use in wet locations to UL and CSA Standards. (LOC 6)Windloading EPA = 1.35 Sq. Ft.IP54 Rated ingress protection.
LEDs are rated for 50,000 hour life with lumen maintenance >70% (L70).
www.rebellelighting.com© 2015 REBELLE All rights reserved. R15 Specifications subject to change without notice.
EXTERIOR
13.125"
17.75"
28"
10" 24"
*Standard configuration unless otherwise specified ¹Delivered lumens based on PF option and standard frost diffuser (4000K,80 CRI) +Consult factory
SAMPLE CATALOG NUMBER: 2756T - 32L40 - 120 - RF - WTUsing this catalog number would order 1 model 2756T post top luminaire with a 4000K, 80 CRI LED light engine at 120 volts with frosted acrylic lens, painted with white texture polyester powder coat. Poles are supplied separately.
LEDWATTS
32L2612 lumens¹32w LED/38w system
COLOR TEMPERATURE
404000K
303000K
353500K
1
2
3
4
5
6
.250" Aluminum Frame Support
LED Light Engine with Silicone Optic and Heat Sink
.125" Acrylic Lens
Driver - 900 mA
Pole Fitter 4.5" OD x 12" Long
Reflector Disk .102" Aluminum(Fixed - Top Position)
1
2
3
4
5
6
Orchestra Circle 2756TLED Detailed Product Description
www.rebellelighting.com© 2015 REBELLE All rights reserved. R15 Specifications subject to change without notice.
Orchestra Circle 2756WLED Maxi Wall Arm Mount
MODEL VOLT SHIELD DIFFUSER COLOR
2756W 120*
208
240
277
347+
PF perforated liner
RF*
CL
frost
clear
OPTIONS
DIM
T2
T3
90
dimmingdriver
type II optic
type IIIoptic
90 CRI
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsSupport Frame: Heavy aluminum plate. Arm assembly: Rectangular extruded aluminum. Hinge/Lock up: Pressure die cast aluminum. Glare guard / Wall canopy / Reflector disk: Aluminum sheet, die formed. Diffusers (side): Thermo-formed acrylic. Bottom lens: Acrylic. Fasteners: Stainless steel.
Electrical ComponentsDriver: Constant current 900 mA, 84% efficiency. Light engine: COB 1208 24mm x 20mm with a 15mm LES.
Luminaire is designed for mounting over a recessed 4" octagon j-box (by others). Holes (4) are provided in wall plate to attach to the wall outside of the j-box. Adequate backing is required inside the wall to support these fixtures. Arm assembly is shipped separately from the head for field attachment.
Luminaire has a choice of frost or clear lens and diffuser, with frost supplied as standard. The perforated liner is supplied if specified. The reflector disk is fixed in top position.Standard optic, Type V square (130°).
The Orchestra maxi wall arm mount is listed for use in wet locations to UL and CSA Standards.(LOC 4, wall mount)
LEDs are rated for 50,000 hour life with lumen maintenance >70% (L70).
www.rebellelighting.com© 2015 REBELLE All rights reserved. R15 Specifications subject to change without notice.
EXTERIOR
17.75"
10" 19"
*Standard configuration unless otherwise specified ¹Delivered lumens based on PF option and standard frost diffuser (4000K, 80 CRI) +Consult factory
SAMPLE CATALOG NUMBER: 2756W - 32L40 - 120 - RF - WTUsing this catalog number would order 1 model 2756W maxi circle wall arm mount luminaire with 4000K, 80 CRI LED light engine at 120 volts with frosted acrylic lens, painted with white texture polyester powder coat.
21"
10.5"
LED
32L2612 lumens¹32W led/38W system
404000K
303000K
353500K
HID model shown, glare band and center disk not available in LED model.
WATTS COLOR TEMPERATURE
13.125"
1
2
4
5
6
7
8
9
10
3
Wall Plate .188” Aluminum
4" Octagon J-Box (By Others)
Driver - 900 mA, Integrally Mounted in Arm
Mounting Arm Bracket 2.0" x 4.0" x .125" Aluminum
Frame Support .250" Aluminum
LED Light Engine with Silicone Optic and Heat Sink
.125" Acrylic Lens
Diecast Aluminum Lock Up
Acrylic Cylinder (.125" Thick)
Reflector Disk .102" Aluminum (Fixed - Top Position)
1
2
3
4
5
6
7
8
9
10
Orchestra Circle 2756WLED Detailed Product Description
www.rebellelighting.com© 2015 REBELLE All rights reserved. R15 Specifications suject to change without notice.
Orchestra Circle 2757LED Mini Ceiling Mount
MODELLED
VOLT SHIELD DIFFUSER COLOR
2757 120*
208
240
277
347+
PF perforated liner
RF*
CL
frost
clear
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsSupport Frame: Heavy aluminum plate. Hinge/Lock up: Pressure die cast aluminum. Ceiling canopy / Reflector disk: Aluminum sheet, die formed. Diffusers (side): Thermo-formed acrylic. Bottom lens: Acrylic. Fasteners: Stainless steel.
Electrical ComponentsDrivers: Constant current 550 mA, 84% efficiency. Light engine: COB 1205 24mm x 20mm with a 13mm LES.
This luminaire is designed to mount to a recessed 4" octagon j-box (by others). Remote mounted driver assemblies are standard (consult factory for lamp to driver distance). Optional integral driver assemblies are offered. For wet locations luminaire must be restrained from wind action. Special hanger or restraint required (by others).
Luminaire has a choice of frost or clear lens and diffuser, with frost supplied as standard. The reflector disk is set at the top position. Standard optic,Type V square (130°).
The Orchestra mini ceiling mount is listed for use in damp locations to UL and CSA standards. An optional wet location label can be provided.(LOC 1, covering ceiling)
LEDs are rated for 50,000 hour life with lumen maintenance >70% (L70).
www.rebellelighting.com© 2015 REBELLE All rights reserved. R15 Specifications subject to change without notice.
INTERIOR
5" dia.
12" 14"
6" 12"
OPTIONS
WL
DIM
90
wet location listing
dimmingdriver
90 CRI
*Standard configuration unless otherwise specified ¹Delivered lumens based on PF option and standard frost diffuser (4000K, 80 CRI) +Consult factory
SAMPLE CATALOG NUMBER: 2757 - 20L40 - 120 - RF - REM - WTUsing this catalog number would order 1 model 2757LED mini circle ceiling mount with LED light engine, 4000K, 80 CRI wired to 120 volts with frosted acrylic lens and painted with white texture polyester powder coat.
8"
Integral driver option shown less reflector disk
remote driverintegral driver
DRIVER LOCATION
REM*
INT
WATTS
20L1313 lumens¹20w LED/23w system
COLOR TEMPERATURE
404000K
303000K
353500K
23
4
5
8
6
7
9
1
Remote Driver Housing - 20 ga. CRS
4" Recessed Octagon J-Box (By Others)
Canopy Assembly
Frame Support .250" Aluminum
LED Light Engine with Silicone Optic and Heat Sink
Acrylic Lens .375" Thick
Diecast Aluminum Lock Up
Acrylic Cylinder (.125" Thick)
Reflector Disk .081" Aluminum (Fixed Top Position)
1
2
3
4
5
6
7
8
9
Orchestra Circle 2757LED Detailed Product Description
www.rebellelighting.com© 2015 REBELLE All rights reserved. R15 Specifications subject to change without notice.
Remote Driver Configuration
3.25"
Ø8"
14.69"
Ø.25"(2)
Backplate
6"
www.rebellelighting.com © 2015 REBELLE All rights reserved. R15 Specifications subject to change without notice.
3.87"
4.31"
Integral Driver Canopy Description
Orchestra Circle 2757LED Mini Ceiling Mount
Remote Driver Description
Orchestra Circle 2757BLED Mini Landscape Bollard
MODEL VOLT SHIELD DIFFUSER COLOR
2757B 120*
208
240
277
347+
PF perforated liner RF* frost WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsFrame support: Aluminum plate. Bollard shaft: Extruded aluminum. Base plate: 0.500" aluminum plate welded to shaft. Diffusers (side): Thermo-formed polycarbonate. Fasteners: Stainless steel. Anchor bolts: Hot dipped, galvanized nuts, bolts and washers.
Electrical ComponentsDriver: Constant current. 550mA, 120-277 volt input, IP66 rated. LED: COB 1205, 80 CRI standard.
Luminaire is designed to attach to a poured concrete foundation using anchor bolts, template and hardware provided. Design of concrete base is by others. A square base cover is provided as an optional extra.
Luminaire has a frosted lens with an optional perforated liner. A silicone optic provides high optical efficiency, excellent transparency, type V distribution and a sealed (IP65) optical compartment protecting COB LED. The reflector disks are made as an optional extra on the bollard since the disk would be prone to vandalism on a bollard in a public space.
The Orchestra mini bollard is listed for use in wet locations to UL and CSA Standards. (LOC 6)
LEDs are rated for 50,000 hour life with lumen maintenance >70% (L70).
www.rebellelighting.com© 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.
EXTERIOR
8"
10.3"
31.7"
OPTIONS
RD
BCS
DIM
90
reflector disk
base cover- square
dimming (0-10 volt)
90 CRI
*Standard configuration unless otherwise specified ¹Source lumens +Consult factory
SAMPLE CATALOG NUMBER: 2757B - 20L - 40 - 120 - RF - WTUsing this catalog number would order 1 model 2757BLED mini landscape bollard with a 20 watt LED light engine, 4000K, 80 CRI wired to 120 volts with frosted polycarbonate lens and painted with white texture polyester powder coat.
6"8"
8"6"
42"
6"
LED
20L2775 lumens¹20w LED/23w system
40*
35
30
4000K
3500K
3000K
COLOR TEMPERATUREWATTS
1
2
3
4
5
6"
6
.250" Aluminum Frame Support
LED Light Engine with Silicone Optic and Heatsink
.125" Polycarbonate Lens
Driver Constant Current
6" O.D. .125" Wall Aluminum Shaft c/w Mounting Base
(4) 1/2" Diameter x 12" Long Galvanized Anchor Bolts
1
2
3
4
5
6
Orchestra Circle 2757BLED Detailed Product Description
www.rebellelighting.com© 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.
Orchestra Circle 2757PLED Mini Pendant Mount
MODEL VOLT SHIELD DIFFUSER COLOR
2757P 120*
208
240
277
347+
PF perforated liner
RF*
CL
frost
clear
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsSupport Frame: Heavy aluminum plate. Hinge/Lock up: Pressure die cast aluminum. Ceiling canopy / Reflector disk: Aluminum sheet, die formed. Diffusers (side): Thermo-formed acrylic. Bottom lens: Acrylic. Fasteners: Stainless steel.
Electrical ComponentsDriver: Constant current 550 mA, 84% efficiency. Light engine: COB 1205 24mm x 20mm with a 13mm LES.
This luminaire is designed to mount to a recessed 4" octagon j-box (by others). Remote mounted driver assemblies are standard (consult factory for lamp to driver distance). Optional integral driver assemblies are offered. For wet locations luminaire must be restrained from wind action. Special hanger or restraint required (by others).
Luminaire has a choice of frost or clear lens and diffuser, with frost supplied as standard. The perforated liner is supplied if specified. Reflector disk is set at the top position. Standard optic is Type V square (130°).
The Orchestra mini pendant is listed for use in damp locations to UL and CSA Standards. An optional wet location label can be provided.(LOC 2, covering ceiling)
LEDs are rated for 50,000 hour life with lumen maintenance >70% (L70).
www.rebellelighting.com© 2015 REBELLE All rights reserved. R15 Specifications subject to change without notice.
INTERIOR
5" dia.
12"
6" 12"
OPTIONS
P( __")
C86
WL
DIM
90
pendant length
ball aligner hanger
wet location listing
dimming driver
90 CRI
*Standard configuration unless otherwise specified ¹Delivered lumens based on PF option and standard frost diffuser (4000K, 80 CRI) +Consult factory
SAMPLE CATALOG NUMBER: 2757P - 20L40 - 120 - RF - REM - P24 - WTUsing this catalog number would order 1 model 2757PLED mini circle pendant with LED light engine, 4000K, 80 CRI wired to 120 volts with frosted acrylic lens, remote driver, pendant length of 24" and painted with white texture polyester powder coat.
8"
remote driver
integral driver
DRIVER LOCATION
REM*
INT
LEDWATTS
20L1313 lumens¹20w LED/23w system
COLOR TEMPERATURE
404000K
303000K
353500K
2
3
4
5
6
7
8
9
1
Remote Driver Housing - 20 ga. CRS
4" Recessed Octagon J-Box (By Others)
Canopy Assembly With Hangstraight
Frame Support .250" Aluminum
Downlight LED Light Engine with Silicone Optic and Heatsink
Acrylic Lens .375" Thick
Diecast Aluminum Lock Up
Acrylic Cylinder .125" Thick
Reflector Disk .081" Aluminum (Fixed Top Position)
1
2
3
4
5
6
7
8
9
Orchestra Circle 2757PLED Detailed Product Description
www.rebellelighting.com© 2015 REBELLE All rights reserved. R15 Specifications subject to change without notice.
3.25"
Ø8"
14.69"
Ø.25"(2)
Backplate
6"
www.rebellelighting.com © 2015 REBELLE All rights reserved. R15 Specifications subject to change without notice.
3.87"
4.31"
Integral Driver Canopy Description
Orchestra Circle 2757PLED Mini Ceiling Mount
Remote Driver Description
Orchestra Circle 2757SLED Mini Wall Sconce
MODEL COLOUR
2757S WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsSupport frame: Heavy aluminum plate. Hinge/Lock up: Pressure die cast aluminum. Housing assembly / Reflector disk: Aluminum sheet, die formed. Diffusers (side): Thermo-formed acrylic. Bottom lens: Acrylic. Fasteners: Stainless steel. Mounting plate: Galvanized steel.
Integral Driver: Constant current 350 mA LEDs: > 82 CRI on a MCB with thermal interface to housing heat sink.
Designed for wall mounting over a recessed 4" octagonal j-box. A heavy gauge mounting plate is attached to the j-box. Unit hooks on to the mounting plate and is secured with two stainless steel set screws. Silicone seal is required across the top of the housing and down each side to exclude moisture in exterior applications.
Frosted outer diffuser, with or without perforated metal liner to provide glare control. The reflector disk is field adjustable to three positions- top, middle and bottom.
The Orchestra mini wall sconce is listed for use in damp locations to UL and CSA Standards. An optional wet location label can be provided. (LOC 4, wall surface)
LEDs are rated for 50,000 hour life with lumen maintenance >70% (L70).
www.rebellelighting.com© 2014 REBELLE All rights reserved. R14
INTERIOR/EXTERIOR
8"
12"
6"
10"
*Standard configuration unless otherwise specified ¹Delivered +Consult facory
SAMPLE CATALOG NUMBER: 2757S - 7L - 40 - 120 - RF - WTUsing this catalog number would order 1 model 2757S mini wall sconce with a 7 watt LED module with a color temperature of 4000K wired to 120 volts with frostedacrylic lens painted with white texture polyester powder coat.
10"
LED VOLT SHIELD DIFFUSER
120*
208
240
277
347
PF perforated liner RF* frost
OPTIONS
WL
DIM
wet location listingdimming driver
COLOR TEMPERATURE
7L 40*
30
35
4000KLumen Multiplier 1.000
3000KLumen Multiplier 0.896
3500KLumen Multiplier 0.925
LED module650 Lumens¹
1
2
3
4
5
6
7
Ø.875"
Mounting Plate
9
8
Frame Support .250" AluminumLED ModulesAcrylic Lens .375" ThickDiecast Aluminum Lock UpJ-Box (By Others)Sub Mounting Plate .063" Zinc Coated Steel
Driver - Constant Current 350 mALight Frost Acrylic Lens .125" ThickReflector Disk .081" Aluminum (3 Position Adjustable)
123456
789
Orchestra Circle 2757SLED Detailed Product Description
Ø.250"4"
5"
www.rebellelighting.com© 2014 REBELLE All rights reserved. R14
8"
24"
6"
10"
10"
Orchestra Circle 2757SL LED Mini Linear Wall Sconce
MODEL LED VOLT DIFFUSER COLOUR
2757SL 20LLED module1950 lumens1
COLOR TEMPERATURE
40*
35
30
120*
208
240
277
347+
RF frost4000K
3500K
3000K
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsSupport frame: Heavy aluminum plate. Hinge/Lock up: Pressure die cast aluminum. Reflector disk: Aluminum sheet, die formed. Diffusers (side): Thermo-formed acrylic. Bottom lens: Acrylic. Fasteners: Stainless steel.
Electrical ComponentsDriver: Constant current high efficiency 350ma. LED module: >82CRI.
Designed for wall mounting over a 4" octagonal j-box. A heavy gauge mounting plate is attached to the j-box. Unit hooks on to the mounting plate and is secured with two stainless steel set screws. Silicone seal is required across the top of the housing and down each side to exclude moisture in exterior applications.
Frosted outer diffuser with an optional perforated metal liner to provide for glare control. The solid reflector disk can be positioned - top, middle or bottom to direct light appropriately for the intended use. Lumen multiplier for 3500K - 0.925, 3000K - 0.896.
The Orchestra mini wall sconce is NRTL listed for use in wet locations to UL and CSA Standards.
LEDs are rated for 50,000 hour life with lumen maintenance >70% (L70).
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
EXTERIOR
SHIELD
PF perforated liner
OPTIONS
DIM
EM
dimming driver
emergency battery
*Standard configuration unless otherwise specified +Consult factory 1Delivered, 4000K
SAMPLE CATALOG NUMBER: 2757SL - 20L - 40 - 120 - RF - WTUsing this catalog number would order 1 model 2757SL mini linear LED wall sconce with 20 watt, 4000K LED module wired to 120 volts with frosted acrylic lens, painted with white texture polyester powder coat.
1
2
3
4
5
9
6
7
8
Frame Support .250" Aluminum
LED Metal Core Boards
Reflector Disk .081" Aluminum (3 Position Adjustable)
Acrylic Lens .125" Thick
Acrylic Lens .375" Thick
Diecast Aluminum Lock Up
4" Recessed Octagon J-Box (By Others)
Mounting Plate .064” Aluminum
Driver - Constant Current
1
2
3
4
5
6
7
8
9
Orchestra Circle 2757SL Detailed Product Description
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Mounting Plate
4"
Ø1.5"
Ø.25"
7.5"
7.5"
Orchestra Circle 2757TLED Mini Landscape Post Top
MODEL VOLT SHIELD DIFFUSER COLOR
2757T 120*
208
240
277
347+
PF perforated liner RF*
CL
frost
clear
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsSupport frame: Heavy aluminum plate. Hinge/Lock up: Pressure die cast aluminum. Reflector disks: Aluminum sheet, die formed. Diffusers (side): Thermo-formed acrylic. Pole fitter: Pressure die cast aluminum. Tenon member: Aluminum conduit. Bottom plate: Aluminum. Fasteners: Stainless steel.
Electrical ComponentsDriver: Constant current 550mA, 84% efficiency. Light engine: COB 1205 24mm x 20mm with a 13mm LES.
Unit is designed to fit a 3" OD pole (1/8" wall thickness or less). Luminaire head is attached with three stainless steel set screws. Driver bracket has 7/8" diameter hole to terminate flexible conduit supply and a ground screw assembly. Pole supplied separately.
Luminaire has a choice of frost or clear lens and diffuser, with frost supplied as standard. The perforated liner is supplied if specified. The reflector disk is set to top position.Standard optic is type V square (130°).
The Orchestra mini landscape post top is listed for use in wet locations to UL and CSA Standards. (LOC 6)Windloading EPA = 0.53 Sq. Ft.
LEDs are rated for 50,000 hour life with lumen maintenance >70% (L70).
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
EXTERIOR
8"
12"
6" 15"
*Standard configuration unless otherwise specified ¹Delivered lumens based on PF option and standard frost diffuser (4000K, 80 CRI) +Consult factory
SAMPLE CATALOG NUMBER: 2757T - 20L40 - 120 - RF - WTUsing this catalog number would order 1 model 2757T mini post top luminaire with LED light engine, 4000K, 80 CRI wired to 120 volts with frosted acrylic lens and painted with white texture polyester powder coat. Poles are supplied separately.
16"
LEDWATTS
20L1313 lumens¹20w LED/23w system
COLOR TEMPERATURE
404000K
303000K
353500K
OPTIONS
T2
T3
DIM
90
type IIoptic
type IIIoptic
0 - 10 volt dimming driver
90 CRI
.250" Aluminum Frame Support
LED Light Engine with Silicone Optic and Heatsink
Reflector Disk .081" Aluminum (Fixed Top Position)
.125" Acrylic Lens
Pole Fitter - Die Cast Aluminum with Set Screws
Driver
Pole (Not Included) Ø3.0"
1
2
3
4
5
6
7
Orchestra Circle 2757TLED Detailed Product Description
123
4
5
6
7
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Orchestra Circle 2757WLED Mini Wall Arm Mount
MODEL VOLT SHIELD DIFFUSER COLOR
2757W 120*
208
240
277
347+
PF perforated liner
RF*
CL
frost
clear
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsSupport Frame: Aluminum plate. Arm assembly: Rectangular extruded aluminum. Hinge/Lock up: Pressure die cast aluminum. Wall canopy / Reflector disk: Aluminum. Diffusers (side): Thermo-formed acrylic. Bottom lens: Acrylic. Fasteners: Stainless steel.
Electrical ComponentsDrivers: Constant current. 550 mA, 84% efficiency, integral mount standard. Light engine: COB 1205 24mm x 20mm with a 13mm LES.
Luminaire is designed for mounting over a recessed 4" octagon j-box (by others). Holes (4) are provided in wall plate to attach to the wall outside of the j-box. Adequate backing is required inside the wall to support these fixtures. Arm assembly is shipped separately from the head for field attachment.
Luminaire has a choice of frost or clear lens and diffuser, with frost supplied as standard. The perforated liner is supplied if specified. The reflector disk is set to the top position.Standard optic is type V square (130°).
The Orchestra mini wall mount is listed for use in damp locations to UL and CSA Standards. An optional wet location label can be provided (LOC 4, wall surface).
LEDs are rated for 50,000 hour life with lumen maintenance >70% (L70).
www.rebellelighting.com© 2015 REBELLE All rights reserved. R15 Specifications subject to change without notice.
INTERIOR
8"
12"
6" 12"
OPTIONS
WL
DIM
90
wet locationlisting
dimming driver
90 CRI
*Standard configuration unless otherwise specified ¹Delivered lumens based on PF option and standard frost diffuser (4000K, 80CRI) +Consult factory
SAMPLE CATALOG NUMBER: 2757W - 20L40 - 120 - RF - WTUsing this catalog number would order 1 model 2757WLED mini circle wall arm mount luminaire with LED light engine, 4000K, 80 CRI wired to 120 volts with frosted acrylic lens and painted with white texture polyester powder coat.
15"
7.5"
HID integral canopy option shown, LED version is supplied as standard integral, with the driver mounted in the arm.
LEDWATTS
20L1313 lumens¹20w LED/23w system
COLOR TEMPERATURE
404000K
303000K
353500K
1
2
4
5
6
78
9
10
3
Wall Plate .188” Aluminum
4" Recessed Octagon J-Box (By Others)
Driver
Mounting Arm Bracket 1.5" x 3.00" x .100" Wall Aluminum
Frame Support .250" Aluminum
Downlight LED Light Engine with Silicone Optic and Heatsink
Acrylic Lens .375" Thick
Diecast Aluminum Lock Up
Acrylic Cylinder (.125" Thick)
Reflector Disk .081" Aluminum (Fixed - Top Position)
1
2
3
4
5
6
7
8
9
10
Orchestra Circle 2757WLED Detailed Product Description
www.rebellelighting.com© 2015 REBELLE All rights reserved. R15 Specifications subject to change without notice.
Orchestra Ellipse 2809BLED Mini Landscape Bollard
MODEL VOLT SHIELD DIFFUSER COLOR
2809B 120*
208
240
277
347+
RF* frost WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsFrame support: Aluminum plate. Bollard shaft: Cast aluminum. Base plate: 0.500" aluminum plate welded to shaft. Diffusers (side): Thermo-formed polycarbonate. Fasteners: Stainless steel. Anchor bolts: Hot dipped, galvanized nuts, bolts and washers.
Electrical ComponentsDriver: Constant current. 550mA, 120-277 volt input, IP66 rated driver. LED: COB 1205, 80 CRI standard.
Luminaire is designed to attach to a poured concrete foundation using anchor bolts, template and hardware provided. Design of concrete base is by others. A rectangular base cover is provided as an optional extra.
Luminaire has a frosted lens with an optional perforated liner. A silicone optic provides high optical efficiency, excellent transparency, type V distribution and a sealed (IP65) optical compartment protecting COB LED. The reflector disks are made as an optional extra on the bollard since the disk would be prone to vandalism on a bollard in a public space.
The Orchestra Ellipse bollard is listed for use in wet locations to UL and CSA Standards. (LOC 6)
LEDs are rated for 50,000 hour life with lumen maintenance >70% (L70).
www.rebellelighting.com© 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.
EXTERIOR
8"
OPTIONS
F
90
RD
BCS
DIM
fusing
90 CRI
reflector disk
base cover- rectangle
dimming (0-10 volt)
SAMPLE CATALOG NUMBER: 2809B - 20L - 40 - 120 - RF - WTUsing this catalog number would order 1 model 2809BLED mini elliptical landscape bollard with with a 20 watt LED module with a color temperature of 4000K wired to 120 volts with frosted polycarbonate lens, painted with white texture polyester powder coat.
6"
9"
11"
6" 8"
6"
11"
42"
*Standard configuration unless otherwise specified ¹Source lumens +Consult factory
LED
20L2775 lumens¹20w LED/23w system
COLOR TEMPERATURE
PF perforated liner
4000K
3500K
3000K
40
35
30
WATTS
6"
6"
.250" Aluminum Frame Support
Downlight LED Light Engine and Heatsink
.125" Polycarbonate Lens
Driver Constant Current
6" x 9” Cast Aluminum Bollard Post
(4) 1/2" Diameter x 12" Long Galvanized Anchor Bolts
1
2
3
4
5
6
Orchestra Ellipse 2809BLED Detailed Product Description
www.rebellelighting.com© 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.
1
2
3
4
5
6
Saturna 4000LED Mini Ceiling Mount
MODEL LED VOLT OPTIC COLOUR
4000 120*
208
240
277
347
PR*
RF
clear prismaticfrost
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsLuminaire housing: Cast aluminum. Gasket: EPDM rubber. Strut assembly: Aluminum sheet, keyholed removal. Reflector disks: Aluminum sheet. Lens/diffuser: Threaded, 3.4" tempered prismatic glass. Fasteners: Stainless steel.
Luminaire is designed to mount over a recessed 4" octagon j-box. Backstrap mounts to the ears of the j-box. The integral driver option provides a driver compartment at the ceiling line. Additional mounting holes are provided to allow mounting independent of the junction box ears, if integral driver option is requested.
Threaded globe with prismatic linear prisms is standard with frosted globe optional. Strut and disk assembly shield light source. Top reflector disk controls upward light.
The Saturna mini ceiling mount is listed for use in damp locations to UL and CSA Standards. An optional wet location label can be provided. LED life: 50,000 hours minimum, L70 @ 25°C.
INTERIOR
OPTIONS
WL wet location label(covered ceilings only)
*Standard configuration unless otherwise specified 1Delivered lumens (4000K, 80 CRI)
SAMPLE CATALOG NUMBER: 4000 - 1x16L - 40 - 120 - PR - REM - WTUsing this catalog number would order 1 model 4000 surface ceiling mount luminaire with a 16 watt, 4000K, 1700 lumen light engine wired to 120 volts, with a clear prismatic globe and remote mounted driver, painted with white texture polyester powder coat.
11.5"
12"4.61"
5"
13.5"
remote driver
integral driver
DRIVER LOCATION
REM*
INT
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
1x16L
COLOR TEMPERATURE
40* 4000K 1700 lumens1
LED module16 watt
LED ComponentsDriver: Constant current, 450mA. Light Engine: Chip-on-Board 13mm LES. Zhaga Book 3 compliant socket.
1
2
3
4
5
6
7
8
4" Recessed Octagon J-Box (By Others)
Housing - Cast Aluminum
Gasket - E.P.D.M. Rubber
Heatsink
Reflector Disks - .102" Aluminum
Strut Assembly
Chip-on-Board 13mm LES, Zhaga Book 3 Compliant Socket
Lens/Diffuser - Prismatic Glass Threaded - Tempered
Driver (Remote Standard) 450 mA, 120-277 Volt Input
1
2
3
4
5
6
7
8
9
Saturna 4000LED Detailed Product Description
www.rebellelighting.com © 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
14.69"
www.rebellelighting.com © 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
3.87"
4.31"
Backplate
Ø6.25"
2.75"
Ø.25"(8)
4.76"
3"
Integral Driver Canopy Detail
Saturna 4000LED Mini Ceiling Mount
Remote Driver Detail
Saturna 4001LED Maxi Ceiling Mount
MODEL LED VOLT OPTIC COLOUR
4001 120*
208
240
277
347
PR*
RF
clear prismatic
frost
DRIVER LOCATION
REM*
INT
remote driver
integral driverWT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsLuminaire housing: Cast aluminum. Gasket: EPDM rubber. Strut assembly: Aluminum sheet, keyholed removal. Reflector disks: Aluminum sheet. Lens/diffuser: Threaded, 4.4" tempered prismatic glass. Fasteners: Stainless steel.
LED ComponentsDriver: Constant current, 450mA. Light Engine: Chip-on-Board 13mm LES. Zhaga Book 3 Compliant Socket.
Luminaire is designed to mount over a recessed 4" octagon j-box. Backstrap mounts to the ears of the j-box. Integral driver option provides a driver compartment at the ceiling line. Additional mounting holes are provided for mounting independent of the junction box ears.
Threaded globe with prismatic linear prisms is standard with frosted globe optional. Strut and disk assembly shield light source.
The Saturna maxi ceiling mount is listed for use in damp locations to UL and CSA Standards. An optional wet location label can be provided. LED life: 50,000 hours minimum, L70 @ 25°C.
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
INTERIOR
OPTIONS
WL wet location label(covered ceilings)
*Standard configuration unless otherwise specified 1Delivered lumens (4000K, 80CRI)
SAMPLE CATALOG NUMBER: 4001 - 1x16L - 40 - 120 - PR - REM - WTUsing this catalog number would order 1 model 4001 surface ceiling mount luminaire with a 16 watt, 4000K, 1700 lumen light engine wired to 120 volts, with a clear prismatic glass globe, painted with white texture polyester powder coat. Remote mounted driver.
14"
5"
16"5.75"
16"
1x16L
COLOR TEMPERATURE
40* 4000K 1700 lumens1
LED module16 watt
1
2
3
4
5
6
7
8
4" Recessed Octagon J-Box (By Others)
Housing - Cast Aluminum
Heatsink
Gasket - E.P.D.M. Rubber
Reflector Disks - .125" Aluminum
Strut Assembly - Keyholed Removal .125" Aluminum
Chip-on-Board 13mm LES, Zhaga Book 3 Compliant Socket
Lens/Diffuser - Clear Prismatic or Frosted Glass Threaded - Tempered
Driver (Remote Standard) 450mA, 120-277 Volt Input
1
2
3
4
5
6
7
8
9
Saturna 4001LED Detailed Product Description
www.rebellelighting.com © 2014 REBELLE All rights reserved. R17 Specifications subject to change without notice.
14.69"
www.rebellelighting.com © 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
3.87"
4.31"
Backplate
Ø6.25"
2.75"
Ø.25"(8)
4.76"
3"
Integral Driver Canopy Detail
Saturna 4001LED Maxi Ceiling Mount
Remote Driver Detail
Saturna 4002LED Mini Pendant Mount
MODEL LED VOLT OPTIC COLOUR
4002 120*
208
240
277
347
PR*
RF
clear prismaticfrost
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsLuminaire housing: Cast aluminum. Gasket: EPDM rubber. Strut assembly: Aluminum sheet, keyholed removal. Reflector disks: Aluminum sheet. Lens/diffuser: Threaded, 3.4" tempered prismatic glass. Stem: Steel tubing with hangstraight swivel. Fasteners: Stainless steel.
Luminaire is designed to mount over a recessed 4" octagon j-box. Backstrap mounts to the ears of the j-box. The integral driver option provides a driver compartment at the ceiling line. Additional mounting holes are provided to allow mounting independent of the junction box ears if integral driver option is requested. For wet locations luminaire must be restrained from wind action. Special hanger or restraint required.A +/- 5° hangstraight is provided. Optional 45° ball aligner is offered.
Threaded globe with prismatic linear prisms is standard with frosted globe optional. Strut and disk assembly shield light source. Top reflector disk controls upward light.
The Saturna mini pendant is listed for use in damp locations to UL and CSA Standards. An optional wet location label can be provided. LED life: 50,000 hours minimum, L70 @ 25°C.
INTERIOR
OPTIONS
WL
C86
P( _ ")
wet location label(covered ceilings)
45° ball aligner hanger
pendant length
*Standard configuration unless otherwise specified
SAMPLE CATALOG NUMBER: 4002 - 1x16L - 40 - 120 - PR - REM - P24 - WTUsing this catalog number would order 1 model 4002 pendant mount luminaire with a 16 watt, 4000K, 1700 lumen light engine wired to 120 volts, a remote mounted driver, a clear prismatic globe, a pendant length of 24" and painted with white texture polyester powder coat.
11.5"
5"
12"4.61"
Length as specified
remote driver
integral driver
DRIVER LOCATION
REM*
INT
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17
1x16L
COLOR TEMPERATURE
40* 4000K1700 lumens
LED module16 watt
LED ComponentsDriver: Constant current, 450ma. Light Engine: Chip-on-Board 13mm LED Zhaga Book 3 Compliant Socket
1
3
2
4
5
6
7
8
9
4" Recessed Octagon J-Box (By Others)
Stem - 1/2" Steel Tubing with Hangstraight Swivel
Housing - Cast Aluminum
Gasket - E.P.D.M. Rubber
Heatsink
Reflector Disks - .102" Aluminum
Strut Assembly - Keyholed Removal .102" Aluminum
Chip-on-Board 13mm LES, Zhaga Book 3 Compliant Socket
Lens/Diffuser - Prismatic Glass Threaded - Tempered
Driver (Remote Mounted) 450mA, 120-277 Volt Input
1
2
3
4
5
6
7
8
9
10
Saturna 4002LED Detailed Product Description
www.rebellelighting.com © 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
14.69"
www.rebellelighting.com © 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
3.87"
4.31"
Backplate
Ø6.25"
2.75"
Ø.25"(8)
4.76"
3"
Integral Driver Canopy Detail
Saturna 4002LED Mini Pendant Mount
Remote Driver Detail
Saturna 4003LED Maxi Pendant Mount
MODEL LED VOLT OPTIC COLOUR
4003 120*
208
240
277
347
PR*
RF
clear prismatic
frost
DRIVER LOCATION
REM*
INT
remotedriver
integraldriver
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsLuminaire housing: Cast aluminum. Gasket: EPDM rubber. Strut assembly: Aluminum sheet, keyholed removal. Reflector disks: Aluminum sheet. Lens/diffuser: Threaded, 4.4" tempered prismatic glass. Stem: Steel tubing with hangstraight swivel. Fasteners: Stainless steel.
Luminaire is designed to mount over a recessed 4" octagon j-box. Backstrap mounts to the ears of the j-box. For wet locations luminaire must be restrained from wind action. Special hanger or restraint required.A +/- 5° hangstraight is provided. Optional 45° ball aligner is offered.
Threaded globe with prismatic linear prisms is standard with frosted globe optional. Strut and disk assembly shield light source. Top reflector disk controls upward light.
The Saturna maxi pendant is listed for use in damp locations to UL and CSA Standards. An optional wet location label can be provided. LED life: 50,000 hours minimum, L70 @ 25°C.
INTERIOR
OPTIONS
WL
C86
P( _ ")
wet location label(covered ceilings)
45° ball aligner hanger
pendant length
*Standard configuration unless otherwise specified 1Delivered lumens (4000K, 80 CRI)
Using this catalog number would order 1 model 4003 pendant mount luminaire with a 16 watt, 4000K, 1700 lumen light engine wired to 120 volts, with a clear prismatic globe, a pendant length of 24" and painted with white texture polyester powder coat. Remote mounted driver.
14"
5"
16"5.75"
Length as specified
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
SAMPLE CATALOG NUMBER: 4003 - 1x16L - 40 - 120 - PR - REM - P24 - WT
1x16L
COLOR TEMPERATURE
40* 4000K1700 lumens1
LED module16 watt
LED ComponentsDriver: Constant current, 450mA. Light Engine: Chip-on-Board 13mm LES, Zhaga Book 3 Compliant Socket
1
3
2
4
5
6
7
8
9
4" Recessed Octagon J-Box (By Others)
Stem - 1/2" Steel Tubing with Hangstraight Swivel
Housing - Cast Aluminum
Heatsink
Gasket - E.P.D.M. Rubber
Reflector Disks - .125" Aluminum
Strut Assembly - Keyholed Removal .125" Aluminum
Chip-on-Board 13mm LES, Zhaga Book 3 Compliant Socket
Lens/Diffuser - Clear Prismatic or Frosted Glass Threaded - Tempered
Driver, (Remote Mounted) 450mA, 120-277 Volt Input
1
2
3
4
5
6
7
8
9
10
Saturna 4003LED Detailed Product Description
www.rebellelighting.com © 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
14.69"
www.rebellelighting.com © 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
3.87"
4.31"
Backplate
Ø6.25"
2.75"
Ø.25"(8)
4.76"
3"
Integral Driver Canopy Detail
Saturna 4003LED Maxi Pendant Mount
Remote Driver Detail
Saturna 4004LED Mini Wall Arm Shepherd's Hook
MODEL LED VOLT OPTIC COLOUR
4004 120*
208
240
277
347
PR*
RF
clear prismatic
frost
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsLuminaire housing: Cast aluminum. Gasket: EPDM rubber. Strut assembly: Aluminum sheet, keyholed removal. Reflector disks: Aluminum sheet. Lens/diffuser: Threaded, tempered prismatic glass. Shepherd's hook arm: Aluminum tubing. Driver compartment and arm spacer: Aluminum sheet (seam welded and ground). Fasteners: Stainless steel.
Luminaire is designed to hook onto a heavy gauge mounting plate. Mounting plate is fixed to the wall surface independent of recessed 4" j-box. Silicone seal is required along the top and down the sides of the driver compartment to exclude moisture.
Threaded clear prismatic or frosted globe with strut and disk assembly to shield light source. Top reflector disk controls upward light.
The Saturna mini wall arm mount luminaire is listed for use in wet locations to UL and CSA Standards. LED life: 50,000 hours minimum, L70 @ 25°C.
EXTERIOR
24"11.5"
OPTIONS
PC button type photocell
*Standard configuration unless otherwise specified 1Delivered lumens (4000K, 80 CRI)
SAMPLE CATALOG NUMBER: 4004 - 1x16L - 40 - 120 - PR - WTUsing this catalog number would order 1 model 4004 wall arm luminaire with a 16 watt, 4000K, 1700 lumen light engine wired to 120 volts, with a clear prismatic globe, painted with white texture polyester powder coat.
18"
12"
6"
12"
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
1x16L
COLOR TEMPERATURE
40* 4000K1700 lumens1
LED module16 watt
LED ComponentsDriver: Constant current, 450mA. Light Engine: Chip-on-Board 13mm LES, Zhaga Book 3 Compliant Socket.
11
1
2
3
4
5
6
7
8
3.0"
8.0"
Ø.313"(4)
Ø2"
9
10
Housing - Cast Aluminum
Heatsink
Gasket - E.P.D.M. Rubber
Reflector Disks - .102" Aluminum
Strut Assembly - Keyholed Removal .102" Aluminum
Chip-on-Board 13mm LES, Zhaga Book 3 Compliant Socket
Lens/Diffuser - Threaded, Tempered Glass
Driver, 450 mA, 120-277 Volt Input
Mounting Plate .102" Aluminum
Shepherd’s Hook Arm 1 - 1/16" x 1/8" Wall Aluminum Tube
4" Recessed Octagon J-Box (By Others)
1
2
3
4
5
6
7
8
9
10
11
Saturna 4004LED Detailed Product Description
www.rebellelighting.com © 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Saturna 4005LED Maxi Wall Arm Shepherd's Hook
MODEL LED VOLT OPTIC COLOUR
4005 120*
208
240
277
347
PR*
RF
clear prismatic
frostWT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsLuminaire housing: Cast aluminum. Gasket: EPDM rubber. Strut assembly: Aluminum sheet, keyholed removal. Reflector disks: Aluminum sheet. Lens/diffuser: Threaded, tempered prismatic glass. Shepherd's hook arm: Aluminum tubing.
Luminaire is designed to hook onto a heavy gauge mounting plate. Mounting plate is fixed to the wall surface independent of recessed 4" j-box. Silicone seal is required along the top and down the sides of the driver compartment to exclude moisture.
Threaded globe with prismatic linear prisms or optional frost. Strut and disk assembly shield light source. Top reflector disk controls upward light.
The Saturna maxi wall arm luminaire is listed for use in wet locations to UL and CSA Standards. LED life: 50,000 hours minimum, L70 @ 25°C.
EXTERIOR
34"
15"
OPTIONS
PC button type photocell
*Standard configuration unless otherwise specified 1Delivered lumens (4000K, 80 CRI)
SAMPLE CATALOG NUMBER: 4005 - 1x16L - 40 - 120 - PR - WTUsing this catalog number would order 1 model 4005 wall arm luminaire with a 16 watt, 4000K, 1700 lumen light engine wired to 120 volts, with a clear prismatic globeand painted with white texture polyester powder coat.
27"
14"
10"
16"
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
1x16L
COLOR TEMPERATURE
40* 4000K1700 lumens1
LED module16 watt
LED ComponentsDriver: Constant current, 450mA. Light Engine: Chip-on-Board 13mm LES, Zhaga Book 3 Compliant Socket.
11
1
2
3
4
5
6
7
8
9
10
Housing - Cast Aluminum
Heatsink
Gasket - E.P.D.M. Rubber
Reflector Disk - .125" Aluminum
Strut Assembly - Keyholed Removal .125" Aluminum
Chip-on-Board 13mm LES, Zhaga Book 3 Compliant Socket
Lens/Diffuser - Prismatic or Frosted Glass Threaded - Tempered
Driver, 450mA, 120-277 Volt Input
Mounting Plate .125" Aluminum
Shepherd’s Hook Arm 1 5/8" x 1/8" Wall Aluminum Tube
4" Recessed Octagon J-Box (By Others)
1
2
3
4
5
6
7
8
9
10
11
Saturna 4005LED Detailed Product Description
4.0"
12"
Ø.313"(4)
Ø2"
www.rebellelighting.com © 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Saturna 4006LED Mini Post Arm Landscape Shepherd's Hook
MODEL LED VOLT OPTIC COLOUR
4006 120*
208
240
277
347
PR*
RF
clear prismatic
frostWT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsHousing: Cast aluminum. Gasket: EPDM rubber. Strut assembly: Aluminum sheet, keyholed removal. Reflector disks: Aluminum sheet. Lens/diffuser: Threaded, tempered prismatic glass. Shepherd's hook arm: Aluminum tube. Post top slip fitter: 3.5" aluminum tube.
LED ComponentsDriver: Constant current, 450mA. Light Engine: Chip-on-Board 13mm LES, Zhaga Book 3 Compliant Socket
The Saturna 4006 luminaire is designed to slip fit a 3" OD pole or tenon (2.875" ID minimum). Top cap is removable for driver access. Stainless steel set screws lock head to pole.
Threaded globe with prismatic linear prisms or optional frost. Strut and disk assembly shield light source. Top reflector disk controls upward light.
The Saturna mini post arm luminaire is listed for use in wet locations to UL and CSA Standards.Windloading EPA = 0.80 Sq. Ft. LED life: 50,000 hours minimum, L70 @25°C.
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
EXTERIOR
12"
24"
4" top of pole tobottom of arm assembly
*Standard configuration unless otherwise specified 1Delivered lumens (4000K, 80 CRI)
SAMPLE CATALOG NUMBER: 4006 - 1x16L - 40 - 120 - PR - WTUsing this catalog number would order 1 model 4006 post arm luminaire with a 16 watt, 4000K, 1700 lumen light engine wired to 120 volts, with a clear prismatic globe and painted white texture. Poles are supplied separately.
16"
12"
6"
3"
1x16L
COLOR TEMPERATURE
40* 4000K1700 lumens1
LED module16 watt
1
2
3
4
5
6
7
8
9
10
11
Housing - Cast Aluminum
Gasket - E.P.D.M Rubber
Heatsink
Strut Assembly - Keyholed Removal .102" Aluminum
Reflector Disks - .102" Aluminum
Chip-on-Board 13mm LES, Zhaga Book 3 Compliant Socket
Lens/Diffuser - Prismatic Glass Threaded - Tempered
Driver - 450mA, 120-277 Volt Input
Shepherd’s Hook Arm 1 1/16" x 1/8" Wall Aluminum Tube
Post Top Slip Fitter 3.5" Aluminum Tube
Pole (Not Included - Order Separately) Ø3.0"
1
2
3
4
5
6
7
8
9
10
11
Saturna 4006LED Detailed Product Description
www.rebellelighting.com © 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Saturna 4007LED Maxi Post Arm Streetscape Shepherd's Hook
MODEL LED VOLT OPTIC COLOUR
4007 120*
208
240
277
347
PR*
RF
clear prismatic
frostWT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsHousing: Cast aluminum. Gasket: EPDM rubber. Strut assembly: Aluminum sheet, keyholed removal. Reflector disks: Aluminum sheet. Lens/diffuser: Threaded, tempered prismatic glass. Shepherd's hook arm: Aluminum tube. Post top slip fitter: 4.5" aluminum tube.
LED ComponentsDriver: Constant current, 450mA. Light Engine: Chip-on-Board 13mm LES, Zhaga Book 3 Compliant Socket
The Saturna 4007 luminaire incorporates a 4.5" diameter driver housing that slips over a 4.0" diameter pole. The assembly is locked onto the pole with three 1/4 - 20 socket set screws. The driver tray is removable and the wiring is connected to the internal pole wiring that is supplied by others.
The 4007 series is a Type V distribution, non-cut-off classified product. The optional frosted glass diffuser softens the light. Strut and disk assembly shield light source. Top reflector disk controls upward light.
The Saturna maxi post arm is listed for use in wet locations to UL and CSA Standards.Windloading EPA = 1.25 Sq. Ft. LED life: 50,000 hours minimum, L70 @ 25°C.
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
EXTERIOR
18"
34"
5" top of pole to bottom of arm assembly
*Standard configuration unless otherwise specified 1Delivered lumens (4000K, 80 CRI)
SAMPLE CATALOG NUMBER: 4007 - 1x16L - 40 - 120 - PR - WTUsing this catalog number would order 1 model 4007 post arm luminaire with a 16 watt, 4000K, 1700 lumen light engine wired to 120 volts, with a clear prismatic globe and painted white texture. Poles are supplied separately.
16"
10"
14"
4"
1x16L
COLOR TEMPERATURE
40* 4000K1700 lumens1
LED module16 watt
7
8
9
10
1
2
3
4
5
6
Housing - Cast Aluminum
Gasket - E.P.D.M Rubber
Chip-on-Board 13mm LES, Zhaga Book 3 Compliant Socket
Strut Assembly - Keyholed Removal .125" Aluminum
Reflector Disks - .125" Aluminum
Lens/Diffuser - Prismatic Glass Threaded - Tempered
Driver - 450mA, 120-277 Volt Supply
Shepherd’s Hook Arm 1 5/8" x 1/8" Wall Aluminum Tube
Post Top Slip Fitter 4.5" Aluminum Tube
Pole (Not Included - Order Separately) Ø4.0"
1
2
3
4
5
6
7
8
9
10
Saturna 4007LED Detailed Product Description
www.rebellelighting.com © 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Saturna 4007ALED Maxi Cantilevered Arm Streetscape Post Mount
MODEL LED VOLT OPTIC COLOUR
4007A 120*
208
240
277
347
PR*
RF
clear prismatic
frost
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsDriver housing / Arm assembly / Mast: Heavy aluminum tubing. Luminaire housing: Cast aluminum. Gasket: EPDM rubber. Strut assembly: Aluminum plate, keyholed removal. Reflector disks: Aluminum plate. Lens/diffuser: Threaded, tempered prismatic glass.
This luminaire is designed to mount to a bottleneck pole catalog number 3031 with a 3.5" diameter x 4.5" tall tenon. Driver is mounted in the base of the pole. Arm assembly and head are locked to the pole with three stainless set screws.
The 4007A series is a Type V area distribution, non-cutoff classified product. Standard refractor is prismatic clear. The optional frosted glass diffuser softens the light. Strut and disk assembly shield light source. Top reflector disk controls upward light.
The Saturna maxi cantilevered arm mount post luminaire is listed for use in wet locations to UL and CSA Standards.Windloading EPA = 1.63 Sq. Ft. LED life: 50,000 hours minimum, L70 @ 25°C.
EXTERIOR
OPTIONS
FS fusing
*Standard configuration unless otherwise specified 1Delivered lumens (4000K, 80 CRI)
SAMPLE CATALOG NUMBER: 4007A - 1x16L - 40 - 120 - PR - WTUsing this catalog number would order 1 model 4007A post arm luminaire with a 16 watt, 4000K, 1700 lumen light engine wired to 120 volts, with a clear prismatic globe, painted white texture. Poles are supplied separately.
30"
43"
27"
16"
16"
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
1x16L
COLOR TEMPERATURE
40* 4000K1700 lumens1
LED module16 watt
LED ComponentsDriver: Constant current, 450mA. Light Engine: Chip-on-Board 13mm LES, Zhaga Book 3 Compliant Socket
1
2
3
4
5
6
7
8
9
Cantilevered Arm Assembly - Aluminum 4.5" Fitter
Housing - Cast Aluminum
Gasket - E.P.D.M. Rubber
Reflector Disks .125" Aluminum
Chip-on-Board 13mm LES, Zhaga Book 3 CompliantSocket
Lens/Diffuser - Prismatic Glass Threaded - Tempered
Strut Assembly - Keyholed Removal .125" Aluminum
Driver, 450mA, 120-277 Volt Input
Pole (Not Included - Order Separately) Ø4.0"
1
2
3
4
5
6
7
8
9
Saturna 4007ALED Detailed Product Description
www.rebellelighting.com © 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Saturna 4007x2LED Maxi Post Arm Twin Streetscape Shepherd's Hook
MODEL LED VOLT OPTIC COLOUR
4007x2 120*
208
240
277
347
PR*
RF
clear prismatic
frostWT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsHousing: Cast aluminum. Gasket: EPDM rubber. Strut assembly: Aluminum sheet, keyholed removal. Reflector disks: Aluminum sheet. Lens/diffuser: Threaded, tempered prismatic glass. Shepherd's hook arm: Aluminum tube. Post top slip fitter: 4.5" aluminum tube.
The Saturna 4007x2 luminaire incorporates a 4.5" diameter ballast housing that slips over a 4.0" diameter pole. The assembly is locked onto the pole with three 1/4 - 20 socket set screws. The electrical tray is removable and the wiring is connected to the internal pole wiring that is supplied by others.
The 4007x2 series is a Type V distribution, non-cut-off classified product. The optional frosted glass diffuser softens the light. Strut and disk assembly shields light source. Top reflector disk controls upward light.
The Saturna maxi twin post arm luminaire is listed for use in wet locations to UL and CSA Standards.Windloading EPA = 2.5 sq. ft. LED life: 50,000 hours minimum, L70 @ 25°C.
EXTERIOR
36"
*Standard configuration unless otherwise specified 1Delivered lumens (4000K, 80 CRI)
SAMPLE CATALOG NUMBER: 4007x2 - 2x16L - 40 - 120 - PR - WTUsing this catalog number would order 1 model 4007x2 twin post arm luminaire with two 16 watt, 4000K, 1700 lumen light engines wired to 120 volts, with clear prismatic globes and painted white texture. Poles are supplied separately.
10"
14"
4"16"
34"
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
2x16L
COLOR TEMPERATURE
40* 4000K2x1700 lumens1
LED module2x16 watt
LED ComponentsDriver: Constant current, 450mA. Light engine: Chip-on-Board 13mm LES, Zhaga Book 3 Compliant Socket.
1
2
3
4
5
6
7
8
9
10
11
Housing - Cast Aluminum
Gasket - E.P.D.M Rubber
Heatsink
Strut Assembly - Keyholed Removal .125" Aluminum
Reflector Disks - .125" Aluminum
Chip-on-Board 13mm LES, Zhaga Book 3 Compliant Socket
Lens/Diffuser - Prismatic Glass Threaded - Tempered
Driver, 450mA, 120-277 Volt Input
Shepherd’s Hook Arm 1 5/8" x 1/8" Wall Aluminum Tube
Post Top Slip Fitter 4.5" Aluminum Tube
Pole (Not Included - Order Separately) Ø4.0"
1
2
3
4
5
6
7
8
9
10
11
Saturna 4007x2LED Detailed Product Description
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications suject to change without notice
Saturna 4009LED Maxi Landscape Bollard
MODEL LAMP VOLT DIFFUSER COLOUR
4009 25L 120*
277
CLR* polycarbonate
COLOUR TEMPERATURE
40*
35
30
4000K
3500K
3000K
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsTop cap: Cast aluminum. Reflector disks / vertical ribs: Machined aluminum plate. Lens / diffuser: .125" clear UV stabilized polycarbonate. Glare guard: Aluminum. Fitter: Die formed aluminum. Post: 5.6" diameter seamless aluminum.
Electrical ComponentsDriver: Constant current, 700 mA, 120 - 277 Volt. LED module: Lumileds COB 1208, 80 CRI.
Luminaire is designed to mount to a concrete base (by others). Four anchor bolts are provided in hot dipped galvanized finish. Base plate is welded to bollard shaft. Base cover is offered as an option.
Fully sealed (IP65) silicone optic with 70° beam angle and 93% efficiency.
The Saturna bollard is listed for use in wet locations to UL and CSA Standards. L70 minimum at 50,000 hours @ 25°C ambient.
www.rebellelighting.com© 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.
EXTERIOR
OPTIONS
BCR
DIM
90
base cover - round
dimming (0-10 volt)
90 CRI
*Standard configuration unless otherwise specified
SAMPLE CATALOG NUMBER: 4009 - 25L - 40 - 120 - CLR - WTUsing this catalog number would order 1 model 4009LED maxi bollard with a 25 watt LED light module with a color temperature of 4000K wired to 120 volts, with a clear polycarbonate lens, painted white texture polyester powder coat.
10"
42"
14"
8"
10"
1 x 25 watts13532 lumens2
¹Nominal LED Power ²Source lumens
Top cap & guard assembly with locking set screws• Top cap - cast aluminum - marine grade• Reflector disks - .188" aluminum• Vertical ribs - .375"aluminum
Luxeon COB 1208 LED with Silicone Optic
Clear Polycarbonate Cylinder
Fitter/Holder - aluminum
Driver - 120 or 277V constant voltage mountedto ground termination bracket.
Post & Base Assembly• Post - seamless aluminum• Base plate - .500" thick• Cast aluminum
Optional base cover
Anchor bolt set4 x .500" Ø x 12" long hot dip galvanized
Conduits (by others)
Locking screw
Ø 10.5" aluminum base cover
1
2
3
4
5
6
7
8
9
10
11
Saturna 4009LED Detailed Product Description
1
2
3
4
6
7
8
9
Optional Base Cover Detail
5
1011
2.63"
Base DetailØ 8" BCD
1.75" max
www.rebellelighting.com© 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.
Saturna 4012LED Mini Wall Back Mount Sconce
MODEL LED VOLT OPTIC COLOUR
4012 120*
208
240
277
347
PR*
RF
clear prismatic
frost
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsDriver housing with LED assembly: Heavy gauge aluminum. Gasket: EPDM rubber. Strut and disk assembly: Heavy gauge aluminum. Globe fitter: Die cast aluminum. Lens/diffuser: Threaded, tempered prismatic glass. Fasteners: Stainless steel.
Luminaire is designed to mount over a centrally located recessed 4" octagon j-box. Four mounting holes are provided to attach luminaire to the wall. Sealant should be applied across the top of the backplate and down the sides to exclude water entrance. Mounting bracket attaches to the wall and strut/disk assembly hooks on top and is secured with stainless steel set screws.
Luminaire features frosted, tempered glass threaded globes. Strut and disk assembly provide a decorative appearance while providing glare control and light direction.
The Saturna mini wall sconce is listed for use in wet locations to UL and CSA Standards. LED life: 50,000 hours minimum, L70 @ 25°C.
EXTERIOR
19"
OPTIONS
PC button type photocell
*Standard configuration unless otherwise specified 1Delivered lumens each side (4000K, 80CRI)
SAMPLE CATALOG NUMBER: 4012 - 2x16L - 40 - 120 - RF - WTUsing this catalog number would order 1 model 4012 wall back mount sconce with 2 x 16 watt, 4000K, 1700 lumen light engines wired to 120 volts, with frosted glass globes and painted with white texture polyester powder coat.
9.37"
12"
7.25"
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
2x16L
COLOR TEMPERATURE
40* 4000K2 x 1700 lumens1
LED module2 x 16 watt
LED ComponentsDriver: Constant current, 450mA. Light Engine: Chip-on-Board 13mm LES , Zhaga Book 3 Compliant Socket.
1
2
3
4
5
6
7
8
9
4" Recessed Octagon J-Box (By Others)(Located On Center Line)
Mounting Plate .081" Aluminum
Gasket - E.P.D.M. Rubber
Reflector Disks .102" Aluminum
Strut Assembly .102" Aluminum
Chip-on-Board 13mm LES, Zhaga Book 3 Compliant Socket
Lens/Diffuser - Frosted Glass Threaded - Tempered
Fitter Assembly .081" Aluminum and Heatsink
Driver, 450mA, 120-277 Volt Input
1
2
3
4
5
6
7
8
9
Saturna 4012LED Detailed Product Description
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Backplate
4.0"
Ø1.563"(1)
5.0"
Ø.281"(6) Mounting Holes
4.0"
Saturna 4013LED Maxi Wall Back Mount Sconce
MODEL LED VOLT OPTIC COLOUR
4013 120*
208
240
277
347
PR*
RF
clear prismatic
frost
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsBallast housing with lampholder assembly: Heavy gauge aluminum. Gasket: EPDM rubber. Strut and disk assembly: Heavy gauge aluminum. Globe fitter: Die cast aluminum. Lens/diffuser: Threaded, tempered prismatic glass. Fasteners: Stainless steel.
Luminaire is designed to mount over a centrally located recessed 4" octagon j-box. Four mounting holes are provided to attach luminaire to the wall. Sealant should be applied across the top of the backplate and down the sides to exclude water entrance. Mounting bracket attaches to the wall and strut/disk assembly hooks on top and is secured with stainless steel set screws.
Luminaire features frosted, tempered glass globes. Strut and disk assembly provides a decorative appearance while providing glare control and light direction.
The Saturna maxi wall sconce is listed for use in wet locations to UL and CSA Standards. LED life: 50,000 hours minimum, L70 @ 25°C.
EXTERIOR
25"
OPTIONS
PC button type photocell
*Standard configuration unless otherwise specified
SAMPLE CATALOG NUMBER: 4013 - 2x16L - 40 - 120 - RF - WTUsing this catalog number would order 1 model 4013 wall back mount sconce with two 16 watt 4000K, 1700 lumen light engines wired to 120 volts, with frosted glass globes and painted with white texture polyester powder coat.
8.6"
14"
16"
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
2x16L
COLOR TEMPERATURE
40* 4000K2 x 1700 lumens1
LED module2 x 16 watt
LED ComponentsDriver: Constant current, 450mA. Light Engine: Chip-on-Board 13mm LES, Zhaga Book 3 Compliant Socket.
¹Delivered lumens each side (4000K, 80CRI)
1
2
4
5
6
7
8
9
Backplate
3
4" Recessed Octagon J-Box (By Others)(Located On Center Line)
Mounting Plate .102" Aluminum
Drivers, 450mA, 120-277 Volt Input
Gasket - E.P.D.M. Rubber
Reflector Disks .125" Aluminum
Strut Assembly .125" Aluminum
Light Engine - Chip-on-Board 13mm, Zhaga Book 3 Compliant Socket
Lens/Diffuser - Clear Prismatic or Frosted Glass Threaded - Tempered
Fitter Assembly .081" Aluminum and Heatsink
1
2
3
4
5
6
7
8
9
Saturna 4013LED Detailed Product Description
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
7.0"
Ø.875"(1)
7.0"
Ø.281"(6) Mounting Holes
7.0"
Saturna 4014LED Mini Wall Mount
MODEL LED VOLT OPTIC COLOUR
4014 120*
208
240
277
347
PR*
RF
clear prismatic
frost
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsLuminaire housing: Cast aluminum. Gasket: EPDM rubber. Strut assembly: Aluminum sheet, keyholed removal. Reflector disks: Aluminum sheet. Lens/diffuser: Threaded, tempered prismatic glass. Arm: Extruded aluminum, round. Wall plate: Aluminum. Exposed fasteners: Stainless steel.
Luminaire is designed for mounting over a recessed j-box. Mounting plate is mounted to wall independent of j-box. Adequate backing must be provided. Sealant is required around circumference of wall plate leaving a void at bottom for drainage. Remote mounted driver assemblies are standard. (Consult factory for lamp to driver distance.)
Luminaire is a non-cutoff decorative luminaire. Optional frosted glass is offered.
The Saturna mini wall mount is listed for use in wet locations to UL and CSA Standards. LED life: 50,000 hours minimum, L70 @ 25°C.
EXTERIOR
OPTIONS
FS fusing
*Standard configuration unless otherwise specified 1Delivered lumens (4000K, 80 CRI)
SAMPLE CATALOG NUMBER: 4014 - 1x16L - 40 - 120 - PR - REM - WTUsing this catalog number would order 1 model 4014 wall mount luminaire with a 16 watt, 4000K, 1700 lumen light engine wired to 120 volts, with a clear prismatic globe and painted with white texture polyester powder coat. Remote mounted driver.
13"
8"
17.5"
11.5"
12"
Integral driver option shown
remote driver
integral driver
DRIVER LOCATION
REM*
INT
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
1x16L
COLOR TEMPERATURE
40* 4000K1700 lumens1
LED module16 watt
LED ComponentsDriver: Constant current, 450mA. Light Engine: Chip-on-Board 13mm LES, Zhaga Book 3 Compliant Socket.
1
2
3
4
5
6
7
8
9
4" Recessed Octagon J-Box (By Others)
Arm and Mounting Bracket - .188" ThickMounting Bracket and Round AluminumExtruded Arm
Housing - Cast Aluminum
Gasket - E.P.D.M. Rubber
Heatsink
Chip-on-Board 13mm LES, Zhaga Book 3 Compliant Socket
Lens/Diffuser - Prismatic Glass Threaded - Tempered
Strut Assembly - Keyholed
Reflector Disk - .102" Aluminum
Driver (Remote Standard) 450mA, 120-277 Volt Input
1
2
3
4
5
6
7
8
9
10
Saturna 4014LED Detailed Product Description
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Saturna 4015LED Maxi Wall Mount
MODEL LED VOLT OPTIC COLOUR
4015 120*
208
240
277
347
PR*
RF
clear prismatic
frost
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsLuminaire housing: Cast aluminum. Gasket: EPDM rubber. Strut assembly: Aluminum sheet, keyholed removal. Reflector disks: Aluminum sheet. Lens/diffuser: Threaded, tempered prismatic glass. Arm: Extruded aluminum, round. Wall plate: Aluminum. Exposed fasteners: Stainless steel.
Luminaire is designed for mounting over a recessed j-box. Mounting plate is mounted to wall independent of j-box. Adequate backing must be provided. Sealant is required around circumference of wall plate leaving a void at bottom for drainage. Remote mounted driver assemblies are standard.
Luminaire is a non-cutoff decorative luminaire. Optional frosted glass is offered.
The Saturna maxi wall mount is listed for use in wet locations to UL and CSA Standards. LED life: 50,000 hours minimum, L70 @ 25°C.
EXTERIOR
16"
10.25"
*Standard configuration unless otherwise specified 1Delivered lumens (4000K, 80 CRI)
SAMPLE CATALOG NUMBER: 4015 - 1x16L - 40 - 120 - PR - REM - WTUsing this catalog number would order 1 model 4015 wall mount luminaire with a 16 watt, 4000K, 1700 lumen light engine wired to 120 volts, with a clear prismatic globe and painted with white texture polyester powder coat, remote mounted driver.
23"
16"
15"
Integral driver option shown
remote driver
integral driver
DRIVER LOCATION
REM*
INT
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
1x16L
COLOR TEMPERATURE
40* 4000K1700 lumens1
LED module16 watt
LED ComponentsDriver: Constant current, 450mA. Light Engine: Chip-on-Board 13mm LES, Zhaga Book 3 Compliant Socket.
1
2
3
4
5
6
7
8
9
4" Recessed Octagon J-Box (By Others)
Arm and Mounting Bracket - .188" ThickMounting Bracket and Round AluminumExtruded Arm
Housing - Cast Aluminum
Heatsink
Gasket - E.P.D.M. Rubber
Chip-on-Board 13mm LES, Zhaga Book 3 Compliant Socket
Lens/Diffuser - Prismatic or Frosted Glass Threaded - Tempered
Reflector Strut Assembly - 0.125" Aluminum
Reflector Disk - .102" Aluminum
Driver (Remote Standard) 450mA, 120-277 Volt Input
1
2
3
4
5
6
7
8
9
10
Saturna 4015LED Detailed Product Description
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
14.69"
www.rebellelighting.com © 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
3.87"
4.31"
11"6"
Ø.25(4)"
Backplate
17"
3.75"4"
Integral Driver Canopy Detail
Saturna 4015LED Maxi Wall Mount
Remote Driver Detail
Saturna 4020LED Mini Landscape Post Top
MODEL LAMP VOLT COLOUR
4020 25L 1 x 25 watts
COLOUR TEMPERATURE
3532 lumens (source)WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
NOITCETORPLACITPOGNITNUOMNOITCURTSNOC
MaterialsPole fitter and top cap: Cast aluminum. Reflector disk: Heavy aluminum. Protective lens: Clear UV stabilized polycarbonate. Vertical ribs: Heavy aluminum.
Electrical ComponentsDriver: Constant Current output, 120 - 277 Volt AC input. Light Engine: Chip-on-Board LED with Silicone Optic, 80 CRI standard.
Luminaire is designed to slip fit a 4” OD pole or tenon. Inside diameter should be no less than 3.75”. Fitter casting is locked to pole by three stainless steel cup point socket set screws with allen drive.
Luminaire uses chip-on-board LEDtechnology with a fully sealed silicone optic. Optic provides 70° beamangle and 93% efficiency. IP65 rated optical compartment.
The Saturna mini post top is listed for use in wet locations to UL and CSA Standards.
Windloading EPA = 0.95 Sq. Ft.
LED life = 50,000 hours L70 @ 25°C ambient.
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
EXTERIOR
OPTIONS
*Standard configuration unless otherwise specified
SAMPLE CATALOG NUMBER: 4020 - 25L - 40 - 120 - CLR - WTUsing this catalog number would order 1 model 4020LED mini landscape post top with 25 watt LED light engine in 4000K wired to 120 volts, with a clear polycarbonatelens and painted white texture.
19.5"
12"6"
12"
Model shown includes optional reflector disk.
CLR*
DIM
RD
90
polycarbonate
dimming (0-10 volt)
24” reflector disk
90 CRI
120*
208
240
277
40*
30
4000K
3000K
Saturna 4020TLED Mini Wall Arm
MODEL LAMP VOLT COLOUR
4020T 25L 1 x 25 watts
COLOUR TEMPERATURE
3532 lumens (source)WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
NOITCETORPLACITPOGNITNUOMNOITCURTSNOC
Luminaire uses chip-on-board LEDtechnology with a fully sealed silicone optic. Optic provides 70° beamangle and 93% efficiency. IP65 rated optical compartment.
The Saturna mini wall arm is listed for use in wet locations to UL and CSA Standards.
LED life = 50,000 hours L70 @ 25°C ambient.
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
EXTERIOR
OPTIONS
*Standard configuration unless otherwise specified
SAMPLE CATALOG NUMBER: 4020T - 25L - 40 - 120 - CLR - WTUsing this catalog number would order 1 model 4020TLED mini wall arm with a 25 watt LED lighting engine in 4000K wired to 120 volts with a clear polycarbonate lens,painted white texture polyester powder coat.
12" 6"
27.8"
10"Post top model shown with reflector disk
CLR*
DIM
90
polycarbonate
dimming (0-10 volt)
90 CRI
120*
208
240
277
40*
30
4000K
3000K
Luminaire is designed to mount to an exterior wall surface. The mounting plate is attached to the wall using appropriate bolts and anchors (by others). Unit is designed to cover a recessed 4" octagon j-box. Wall canopy hooks on to mounting plate and is locked by two set screws at bottom. Chaulking is required (by others) across top and down sides of wall canopy to exclude moisture.
MaterialsArm fitter and top cap: Cast aluminum. Protective lens: Clear UV stabilized polycarbonate. Vertical ribs: Heavy aluminum. Arm: Extruded aluminum.
Electrical ComponentsDriver: Constant current, 120 - 277 volt AC input. Light engine: Chip-on-Board LED with silicone optic, 80 CRI standard.
Saturna 5008LED Wall Mount with Cross Guard
MODEL LAMP VOLT COLOUR
5008 9L
13L
120*
277
3472
COLOUR TEMPERATURE
40*
30
9 watt LED module1
13 watt LED module1
4000K
3000K
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsHousing base / Cross guard: Die cast, heavy wall, marine grade aluminum. Lens gasket: Extruded EPDM, fully gasketted around glassware and housing perimeter. Exposed fasteners: Stainless steel allen drive cap screws.
Electrical ComponentsDriver: 350mA or 250 mA. LED’s: COB with Zhaga compliant socket, 80 CRI standard.
The Saturna 5008 is designed for wall mounting over a 4" recessed octagonal junction box (by others). To maintain wet location listing the housing should have a bead of sealant around the perimeter where the housing meets the wall. A continuous gasket is provided between housing back and wall surface. Unit may be mounted to ceiling surface.
The sodalime glass diffuser incorporates inner prisms with a ceramic fired frost coating to softly diffuse the light output. Glassware is North American made and is tempered to resist heat and promote toughness in high vandalism prone areas. A perimeter channel gasket of EPDM rubber seals glass between cross guard and housing.
The Saturna wall mount is CSA/UL listed for wet locations more than four feet from the ground. Units are fully gasketted and utilize aluminum castings and glass diffusers for increased weatherability and resistance to corrosion and UV radiation. Life = 50,000 hours. Mimimum L70 @ 25°C ambient.
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18
EXTERIOR
OPTIONS
OPC
PC
DIM
polycarbonate diffuser
photocell 120-277V only, button-type
0-10 volt dimming driver
*Standard configuration unless otherwise specified
SAMPLE CATALOG NUMBER: 5008 - 13L - 40 - 120 - WT
8.25"
11" DIA.
Using this catalog number would order 1 model 5008LED wall mount luminaire with cross guard and 13 watt LED module at 4000K wired to 120 volts, painted with white texture polyester powder coat.
1LED Power 2Only available in 13L version
1
2
3
45
6
7
8
9
10
Cast Aluminum Cross Guard (Marine Grade)4" Octagon J-Box (By Others) (Recessed)Cast Aluminum Housing (Marine Grade)#10 -24 Stainless Steel Flat Head Cap Screws (4) Flush MountHousing Gasket - E.P.D.M.
Driver (Constant Current)Electrical TrayGlass Diffuser - Inside FrostedLED COB ModuleLens Gasket - Extruded E.P.D.M.
1234
5
678910
Saturna Surface 5008LED Detailed Product Description
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18
Saturna 5008CLED Wall Mount Cut Off Face
MODEL LAMP VOLT COLOUR
5008C 9L
13L
120*
277
3472
9 watt LED module1
13 watt LED module1
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsHousing base / Guard: Die cast, heavy wall, marine grade aluminum. Lens gasket: Extruded EPDM, Fully gasketted around glassware and housing perimeter. Exposed fasteners: Stainless steel allen drive cap screws.
Electrical ComponentsDriver: Constant current, 350mA or 250 mA. LEDs: COB with Zhaga compliant socket, 80CRI standard.
The Saturna 5008C is designed for wall mounting over a 4" recessed octagonal junction box (by others). To maintain wet location listing the housing should have a bead of sealant around the perimeter where the housing meets the wall. A continuous gasket is provided between housing back and wall surface.
Luminaire provides a cutoff lighting distribution. The LED compartment is contained in the upper hemisphere of the hood guard. A gasketted, prismatic tempered glass lens seals the LED compartment from contamination.
The Saturna wall mount is CSA/UL listed for wet locations more than four feet from the ground. Units are fully gasketted and utilize aluminum castings and glass diffusers for increased weatherability and resistance to corrosion and UV radiation. Life = 50,000 hours. Mimimum L70 @ 25°C ambient.
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18
OPTIONS
PC
DIM
photocell 120-277V only, button type
0-10 volt dimming driver
COLOR TEMPERATURE
40*
30
4000K
3000K
*Standard configuration unless otherwise specified
SAMPLE CATALOG NUMBER: 5008C - 13L - 40 - 120 - WT
8.25"
11" DIA.
Using this catalog number would order 1 model 5008CLED wall mount luminaire with cut-off face with 13 watt LED module at 4000K wired to 120 volts, painted with white texture polyester powder coat.
EXTERIOR
1LED Power 2Only available in 13L version
1
2
3
4
7
5
6
8
9
Cast Aluminum Cut Off Face Guard (Marine Grade)4" Octagon J-Box (By Others) (Recessed)Cast Aluminum Housing (Marine Grade)#10 -24 Stainless Steel Flat Head Cap Screws (4) Flush MountElectrical Tray with LED COB Module
Glass Diffuser - Tempered Prismatic GaskettedDriver (Constant Current)Cast Concave Face (Marine Grade)Housing Gasket - E.P.D.M.
1234
5
6789
Saturna Surface 5008CLED Detailed Product Description
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18
Saturna 5008HLED Wall Mount with Hood Face
MODEL LAMP VOLT COLOUR
5008H 9L
13L
120*
277
3472
9 watt LED module1
13 watt LED module1
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsHousing base / Hood guard: Die cast, heavy wall, marine grade aluminum. Lens gasket: Extruded EPDM, fully gasketted around glassware and housing perimeter. Exposed fasteners: Stainless steel allen drive cap screws.
Electrical ComponentsDriver: 350mA or 250 mA. LED’s: COB with Zhaga compliant socket, 80 CRI standard.
The Saturna 5008H is designed for wall mounting over a 4" recessed octagonal junction box (by others). To maintain wet location listing the housing should have a bead of sealant around the perimeter where the housing meets the wall. A continuous gasket is provided between housing back and wall surface.
The soda lime glass diffuser incorporates inner prisms with an integral ceramic fired frost coating to softly diffuse the lamp output. Glassware is North American made and is tempered to resist heat and promote toughness in high vandalism prone areas. A perimeter channel gasket of EPDM rubber seals glass between hood guard and housing.
The Saturna wall mount is CSA/UL listed for wet locations more than four feet from the ground. Units are fully gasketted and utilize aluminum castings and glass diffusers for increased weatherability and resistance to corrosion and UV radiation. Life = 50,000 hours. Mimimum L70 @ 25°C ambient.
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18
EXTERIOR
OPTIONS
OPC
PC
DIM
polycarbonate diffuser max.
photocell 120-277V only, button type
0-10 volt dimming driver
COLOR TEMPERATURE
40*
30
4000K
3000K
*Standard configuration unless otherwise specified
SAMPLE CATALOG NUMBER: 5008H - 13L - 40 - 120 - WT
8.25"
11" DIA.
Using this catalog number would order 1 model 5008H wall mount luminaire with hood face and 13 watt LED module at 4000K wired to 120 volts, painted with white texture polyester powder coat.
1LED Power 2Only available in 13L version
1
2
3
4
5
6
7
8
9
10
4" Octagon J-Box (By Others) (Recessed)Cast Aluminum Hood Guard (Marine Grade)Cast Aluminum Housing (Marine Grade)#10 -24 Stainless Steel Flat Head Cap Screws (4) Flush MountDriver (Constant Current)
Glass Diffuser - Inside FrostedElectrical TrayLED COB ModuleLens Gasket - Extruded E.P.D.M.Housing Gasket - E.P.D.M.
1234
5
678910
Saturna Surface 5008HLED Detailed Product Description
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18
Saturna 5008NGLED Wall Mount without Guard
MODEL LAMP VOLT COLOUR
5008NG 120*
277
3472
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsHousing base / Lens trim: Die cast, heavy wall, marine grade aluminum. Lens gasket: Extruded EPDM, fully gasketted around glassware and housing perimeter. Exposed fasteners: Stainless steel allen drive cap screws.
Electrical ComponentsDriver: 350mA or 250 mA. LED’s: COB with Zhaga compliant socket, 80 CRI standard.
The Saturna 5008NG is designed for wall mounting over a 4" recessed octagonal junction box (by others). To maintain wet location listing the housing should have a bead of sealant around the perimeter where the housing meets the wall. A continuous gasket is provided between housing back and wall surface. Unit may be mounted to ceiling surface.
The sodalime glass diffuser incorporates inner prisms with a ceramic fired frost coating to softly diffuse the light output. Glassware is North American made and is tempered to resist heat and promote toughness in high vandalism prone areas. A perimeter channel gasket of EPDM rubber seals glass between hood trim and housing.
The Saturna wall mount is CSA/UL listed for wet locations more than four feet from the ground. Units are fully gasketted and utilize aluminum castings and glass diffusers for increased weatherability and resistance to corrosion and UV radiation. Life = 50,000 hours. Mimimum L70 @ 25°C ambient.
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18
EXTERIOR
OPTIONS
OPC
PC
DIM
polycarbonate diffuser
photocell 120-277V only, button type
0-10 volt dimming driver
*Standard configuration unless otherwise specified
SAMPLE CATALOG NUMBER: 5008NG - 13L - 40 - 120 - WT
7.5"
11" DIA.
Using this catalog number would order 1 model 5008NGLED wall mount luminaire with no guard and 13 watt LED module at 4000K wired to 120 volts, painted with white texture polyester powder coat.
9L
13L
9 watt LED module1
13 watt LED module1
COLOR TEMPERATURE
40*
30
4000K
3000K
1LED Power 2Only available in 13L version
1
2
3
45
6
7
8
9
10
Glass with No Guard
4" Octagon J-Box (By Others) (Recessed)
Cast Aluminum Housing (Marine Grade)
#10 -24 Stainless Steel Flat Head Cap Screws (4) Flush Mount
Housing Gasket - E.P.D.M.
Driver (Constant Current)
Electrical Tray
Glass Diffuser - Inside Frosted
LED COB Module
Lens Gasket - Extruded E.P.D.M.
1
2
3
4
5
6
7
8
9
10
Saturna Surface 5008NGLED Detailed Product Description
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18
Saturna 5009LED Recessed Wall with Cross Guard
MODEL LAMP VOLT COLOUR
5009 120*
277
3472
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsConcrete pour housing: Polyester powder coated .064" aluminum. Splay trim: Aluminum. Cross guard: Die cast, heavy wall, marine grade aluminum. Lens gasket: Extruded EPDM, fully gasketted around glassware. Exposed fasteners: Stainless steel allen drive cap screws, captivated.
Electrical ComponentsDriver: Constant current 350mA or 250 mA. LEDs: COB with Zhaga compliant socket, 80 CRI standard.
The Saturna 5009 is designed for concrete pour wall installations. (See installation instructions on www.rebellelighting.com for further details). Consult factory for concrete block, masonry or hollow wall constructions. Thru wiring approved for 12ga wire - 4 in / 4 out plus ground. Complies with ADA requirement for less than 4 inch protrusion.
The sodalime glass diffuser incorporates inner prisms with a ceramic fired frost coating to softly diffuse the LED output. The substantial glassware is North American made and is tempered to resist heat and promote toughness in high vandalism prone areas. A perimeter channel gasket of EPDM rubber seals glass between cross guard and housing.
The Saturna recessed wall is CSA/UL listed for wet locations less than four feet from the ground - ADA Compliant. Units are fully gasketted and utilize aluminum castings and glass diffusers for increased weatherability and resistance to corrosion and UV radiation. Life = 50,000 hours. Minimum L70 @ 25°C ambient.
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18
EXTERIOR
OPTIONS
OPC
DIM
polycarbonate diffuser
0-10 volt dimming driver
*Standard configuration unless otherwise specified
SAMPLE CATALOG NUMBER: 5009 - 13L - 40 - 120 - WT
3.9"
Using this catalog number would order 1 model 5009 recessed wall luminaire with cross guard with 13 watt LED module at 4000K wired to 120 volts, painted with white texture polyester powder coat.
13.5"
12.5"
9L
13L
9 watt LED module1
13 watt LED module1
COLOR TEMPERATURE
40*
30
4000K
3000K
1LED Power 2Only available in 13L version
15.4" 3.2"
2
3
4
5
6
7
8
9
Lens Gasket - Extruded E.P.D.M.Concrete Pour Box Assembly Polyester PowderCoat .064" AluminumElectrical Tray with LED COB ModuleDriver (Constant Current)Splay Trim - .081" Aluminum
External “Thru-Wire” J-Box: (4IN / 4OUT)Die Cast Aluminum (3) 1/2" NPT Openings
#10 -24 Stainless Steel Flat Head Cap Screws Captive (4) Flush Mount
Glass Diffuser - Inside Frosted
Cast Aluminum Cross Guard (Marine Grade)
12
345
6
7
8
9
Saturna Recessed 5009LED Detailed Product Description
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18
Saturna 5009CLED Recessed Wall Cut Off Face
MODEL LAMP VOLT COLOUR
5009C 9L
13L
120*
277
3472
9 watt LED module1
13 watt LED module1
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsConcrete pour housing: Polyester powder coated .064" aluminum. Splay trim: Aluminum. Frame: Die cast, heavy wall, marine grade aluminum. Lens gasket: Extruded EPDM, fully gasketted around glassware. Exposed fasteners: Stainless steel allen drive cap screws, captivated.
Electrical ComponentsDriver: Constant current 350mA or 250 mA. LEDs: COB with Zhaga compliant socket, 80 CRI standard.
The Saturna 5009C is designed for concrete pour wall installations. (See installation instructions on www.rebellelighting.com for further details). Consult factory for concrete block, masonry or hollow wall constructions. Thru wiring approved for 12ga wire - 4 in / 4 out plus ground. Complies with ADA requirement for less than 4 inch protrusion.
Luminaire provides a cut-off lighting distribution. The LED compartment is contained in the upper hemisphere of the hood guard. A gasketted, prismatic tempered glass lens seals the LED compartment from contamination.
The Saturna recessed wall is CSA/UL listed for wet locations less than four feet from the ground - ADA Compliant. Units are fully gasketted and utilize aluminum castings and glass diffusers for increased weatherability and resistance to corrosion and UV radiation. Life = 50,000 hours. Mimimum L70 @ 25°C ambient.
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18
EXTERIOR
OPTIONS
OPC
DIM
polycarbonate diffuser
0-10 volt dimming driver
*Standard configuration unless otherwise specified
SAMPLE CATALOG NUMBER: 5009C - 13L - 40 - 120 - WT
3.9"
12.5"
Using this catalog number would order 1 model 5009CLED recessed wall cutoff face luminaire with cutoff guard and a 13 watt LED module at 4000K wired to 120 volts, painted with white texture polyester powder coat.
13" DIA.
13.5"
COLOR TEMPERATURE
40*
30
4000K
3000K
1LED Power 2Only available in 13L version
1
2
3
4
5
6
7
8
9
Lens Gasket - Extruded E.P.D.M.Concrete Pour Box Assembly Polyester PowderCoat .064" AluminumElectrical Tray with LED COB ModuleGlass Diffuser - Tempered Prismatic GasketedDriver - Constant Current
Cast Concave Face (Marine Grade)Splay Trim - .081" AluminumExternal “Thru-Wire” J-Box: (4IN / 4OUT) Die CastAluminum (3) 1/2" NPT OpeningsCast Aluminum Cut Off Face Guard (Marine Grade)
12
345
67
89
Saturna Recessed 5009CLED Detailed Product Description
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18
5.4" 3.9"
Saturna 5009HLED Recessed Wall with Hood Guard
MODEL LAMP VOLT COLOUR
5009H 9L
13L
120*
277
3472
9 watt LED module1
13 watt LED module1
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsConcrete pour housing: Polyester powder coated .064" aluminum. Splay trim: Aluminum. Hood guard: Die cast, heavy wall, marine grade aluminum. Lens gasket: Extruded EPDM, fully gasketted around glassware. Exposed fasteners: Stainless steel allen drive cap screws, captivated.
Electrical ComponentsDriver: Constant current 350mA or 250 mA. LEDs: COB with Zhaga compliant socket, 80 CRI standard.
The Saturna 5009H is designed for concrete pour wall installations. (See installation instructions on www.rebellelighting.com for further details). Consult factory for concrete block, masonry or hollow wall constructions. Thru wiring approved for 12ga wire - 4 in / 4 out plus ground. Complies with ADA requirement for less than 4 inch protrusion.
The soda lime glass diffuser incorporates inner prisms with a internal ceramic fired frost coating to softly diffuse the lamp output. The substantial glassware is North American made and is tempered to resist heat and promote toughness in high vandalism prone areas. A perimeter channel gasket of EPDM rubber seals glass between hood guard and housing.
The Saturna recessed wall is CSA/UL listed for wet locations less than four feet from the ground - ADA Compliant. Units are fully gasketted and utilize aluminum castings and glass diffusers for increased weatherability and resistance to corrosion and UV radiation. Life = 50,000 hours. Minimum L70 @ 25°C ambient.
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18
EXTERIOR
OPTIONS
OPC
DIM
polycarbonate diffuser
0-10 volt dimming driver
COLOR TEMPERATURE
40*
30
4000K
3000K
*Standard configuration unless otherwise specified
SAMPLE CATALOG NUMBER: 5009H - 13L - 40 - 120 - WT
3.9"
12.5"
Using this catalog number would order 1 model 5009H recessed wall luminaire with hood guard with 13 watt LED module at 4000K wired to 120 volts, painted with white texture polyester powder coat.
13" DIA.
13.5"
1LED Power 2Only available in 13L version
1
2
3
4
5
6
8
9
10
7
Lens Gasket - Extruded E.P.D.M.
Concrete Pour Box Assembly Polyester PowderCoat .064" Aluminum
Electrical Tray
LED COB Module
Driver (Constant Current)
Splay Trim - .081" Aluminum
External “Thru-Wire” J-Box: (4IN / 4OUT)Die Cast Aluminum (3) 1/2" NPT Openings
#10 -24 Stainless Steel Flat Head Cap Screws Captive (4) Flush Mount
Cast Aluminum Hood Guard (Marine Guard)
Glass Diffuser - Inside Frosted
1
2
3
4
5
6
7
8
9
10
Saturna Recessed 5009HLED Detailed Product Description
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18
5.4" 3.9"
Saturna 5009NGLED Recessed Wall with No Guard
MODEL LAMP VOLT COLOUR
5009NG 9L
13L
120*
277
3472
9 watt LED module1
13 watt LED module1
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsConcrete pour housing: Polyester powder coated .064" aluminum. Splay trim: Aluminum. Lens trim: Die cast, heavy wall, marine grade aluminum. Lens gasket: Extruded EPDM, fully gasketted around glassware. Exposed fasteners: Stainless steel allen drive cap screws, captivated.
Electrical ComponentsDriver: Constant current 350mA or 250 mA. LEDs: COB with Zhaga compliant socket, 80 CRI standard.
The Saturna 5009NG is designed for concrete pour wall installations. (See installation instructions on www.rebellelighting.com for further details). Consult factory for concrete block, masonry or hollow wall constructions. Thru wiring approved for 12ga wire - 4 in / 4 out plus ground. Complies with ADA requirement for less than 4 inch protrusion.
The soda lime glass diffuser incorporates inner prisms with a internal ceramic fired frost coating to softly diffuse the lamp output. Glassware is North American made and is tempered to resist heat and promote toughness in high vandalism prone areas. A perimeter channel gasket of EPDM rubber seals glass between trim and housing.
The Saturna recessed wall is CSA/UL listed for wet locations less than four feet from the ground - ADA Compliant. Units are fully gasketted and utilize aluminum castings and glass diffusers for increased weatherability and resistance to corrosion and UV radiation. Life = 50,000 hours. Mimimum L70 @ 25°C ambient.
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18
EXTERIOR
OPTIONS
OPC
DIM
polycarbonate diffuser
0-10 volt dimming driver
*Standard configuration unless otherwise specified
SAMPLE CATALOG NUMBER: 5009NG - 13L - 40 - 120 - WT
3.1"
13" DIA.
Using this catalog number would order 1 model 5009NG recessed wall luminaire with no guard with 13 watt LED module at 4000K wired to 120 volts, painted with white texture polyester powder coat.
12.5" 13.5"
COLOR TEMPERATURE
40*
30
4000K
3000K
1LED Power 2Only available in 13L version
1
2
3
4
5
6
7
8
Lens Gasket - Extruded E.P.D.M.Concrete Pour Box Assembly Polyester PowderCoat .064" AluminumLED COB ModuleDriver (Constant Current)Splay Trim - .081" Aluminum
External “Thru-Wire” J-Box: (4IN / 4OUT)Die Cast Aluminum (3) 1/2" NPT Openings#10 -24 Stainless Steel Flat Head Cap Screws Captive (4) Flush MountGlass Diffuser - Inside Frosted
12
345
6
7
8
Saturna Recessed 5009NGLED Detailed Product Description
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18
5.4" 3.2"
Streamline 6000LED Mini Indirect Ceiling Wash
MODEL COLOR
6000 WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAdjustable lamp housing: Cast aluminum. Driver enclosure: Cast aluminum with top cover plate. Lens: Solite, tempered glass in captive frame.
Electrical ComponentsLight engine: Aluminum core PCB each with 4 Luxeon M emitters and Ledil Strata - SQ optics.Driver: High efficiency, <20% THD, >90% PF
The 6000LED series is designed for wall mounting over a recessed FS junction box which is located parallel to the luminaire back on the center line. The luminaire mounting plate is secured to the mounting surface outside of the FS box location and the luminaire is hooked on the plate and secured with set screws on the bottom. The supply wires are connected to the luminaire leads and contained in the FS box cavity.Maxiumum fixture weight 11 lbs.
The 6000LED optical system is optimized to provide an asymmetric indirect distribution. Head is adjustable (+/- 15°) to customize aiming upon installation, if required.
The 6000LED is normally provided for indoor dry or damp locations to UL and CSA standards but, if ordered, can be made suitable for wet locations to UL and CSA standards. (LOC 4 > 4 FEET)
All units have a protective tempered glass cover and are completely gasketted to exclude any contaminants.
LEDs are rated for 50,000 hour life with lumen maintenance > 70% (L70).
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
INTERIOR/EXTERIOR
10"
12"
3"
*Standard configuration unless otherwise specified ¹Consult factory ²Delivered lumens (4000K)
SAMPLE CATALOG NUMBER: 6000 - 32L - 4K - 120 - WTUsing this catalog number would order 1 model 6000 mini indirect ceiling wash luminaire with a 32 watt, 4000K light engine wired to 120 volts, painted white texture polyester powder coat.
+/- 15°
VOLT
120*
208
240
277
347¹
32L
OPTIONS
WL
CV
DIM
DF
wet location
cut off visor for downward tilt
dimming driver 0 - 10V control
micro-diffusion film
WATTS COLOR TEMPERATURE
3000K
3500K
4000K
5000K
3K
35K
4K
5K
1 x 32 watts3,100 lumens2
Adjustable Housing (+/-15°) - Cast Aluminum
Driver Enclosure - Cast Aluminum with Top Cover Plate
Light Engine, 4 x Luxeon 'M' Emitters with Optics
FS Box 2" x 4" Rectangle (By Others)Mount Horizontally
Glass - Solite,Tempered 5/32" Thick in Captive Frame
Driver, High Efficiency <20% THD, >90% PF
Heatsink Plate
1
2
3
4
5
6
7
Streamline Indirect 6000LED Detailed Product Description
1
2
3
4
5
7
6
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
8"
Ø1.063"
Ø.281" (2)
Mounting Plate
Streamline 6001LED Midi Indirect Wall Mount
6001 120*
208
240
277
347+
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
The 6001LED series is designed for wall mounting over a 4" octagonal j-box. A heavy gauge mounting plate attaches to the wall surface. Head hooks on to the mounting plate and locks in place with two stainless steel set screws.Maximum fixture weight 32 lbs.
The 6001LED optical system is optimized to provide an asymmetric indirect distribution. Head is adjustable (+/- 15°) to customize aiming upon installation, if required.
The 6001LED is listed for use in dry/damp locations to UL and CSA standards. Optional 'wet location' labelled unit can be provided as an option. (LOC 4 > 4 FEET)
All units have a protective, tempered, glass shield to protect the LED compartment. The wet location units are totally sealed for wet location usage. (IP65)
LEDs are rated for 50,000 hour life with lumen maintenance > 70% (L70).
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
INTERIOR/EXTERIOR
*Standard configuration unless otherwise specified +Consult factory ¹Delivered lumens (4000K)
SAMPLE CATALOG NUMBER: 6001 - 134L - 4K - 120 - WTUsing this catalog number would order 1 model 6001LED midi indirect wall mount luminaire with 134 watt, 4000K light engine wired to 120 volts, painted white texture polyester powder coat.
18"
4.5"+/- 15°
WL
CV
DIM
NAT
wet location
cut off visor for downward tilt
dimming driver 0 - 10V control
natatorium construction
MaterialsAdjustable lamp housing: Cast aluminum. Driver enclosure: Cast aluminum with top cover plate. Glass frame: Cast aluminum. Lens: Clear, tempered glass.
Electrical ComponentsLight engine: Aluminum core PCB each with 4 Luxeon M emitters and Ledil Strata - SQ optics.Driver: High efficiency, <20% THD, >90% PF
14"
MODEL COLOR VOLT OPTIONSWATTS COLOR TEMPERATURE
134L
101L
3000K
3500K
4000K
5000K
3K
35K
4K
5K
1 x 134 watts12,400 lumens1
1 x 101 watts9,300 lumens1
Adjustable Lamp Housing (+/-15°) - Cast Aluminum
Driver Enclosure - Cast Aluminum with Top Cover Plate
Enclosed LED Glass Frame and Heat Sink Assembly
Driver
Recessed 4" Octagon J-Box (By Others)
LED Boards 4 x Luxeon 'M' Emitters Each
Housing Assembly
1
2
3
4
5
6
7
Streamline Indirect 6001LED Detailed Product Description
1
2
3
4
5
7
6
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Cut-off Visor Option +/- 15° Field Adjustable Head
Mounting Plate
10" Ø.250"(4)
Ø1.563" Center Hole
2.38"
Streamline 6002LED Maxi Indirect Ceiling Wash
MODEL VOLT OPTIONS COLOR
6002 120*
208
240
277
347+
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAdjustable lamp housing: Cast aluminum. Driver enclosure: Cast aluminum with top cover plate. Lens: Clear, tempered glass in captive cast aluminum gasketted frame.
Electrical ComponentsLight engine: Aluminum core PCB each with 4 Luxeon M emitters and Ledil Strata - SQ optics.Driver: High efficiency, <20% THD, >90% PF
The 6002LED series is designed for wall mounting over a recessed j-box. Wall must have sufficient strength to support luminaire. The mounting plate is secured to wall and the luminaire is hooked on to the plate and locked in place with captive set screws.Maximum fixture weight 63 lbs.
The 6002LED optical system is optimized to provide an asymmetric indirect distribution. Head is adjustable (+/- 15°) to customize aiming upon installation, if required.
The 6002LED is normally provided for indoor dry or damp locations to UL and CSA standards but, if ordered, can be made suitable for wet locations to UL and CSA standards. (LOC 4)
All units have a protective, tempered, glass shield to protect the LED compartment. The wet location units are totally sealed for wet location usage (IP65).
LEDs are rated for 50,000 hour life with lumen maintenance > 70% (L70).
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
INTERIOR/EXTERIOR
18.5"
24"
6"
*Standard configuration unless otherwise specified +Consult factory ¹Delivered lumens (4000K)
SAMPLE CATALOG NUMBER: 6002 - 200L - 4K - 120 - WTUsing this catalog number would order 1 model 6002LED maxi indirect ceiling wash luminaire with a 200 watt, 4000K light engine wired to 120 volts, painted white texture polyester powder coat.
+/- 15°
WATTS
200L
167L
134L
3000K
3500K
4000K
5000K
3K
35K
4K
5K
COLOR TEMPERATURE
WL
CV
DIM
NAT
wet location
cut-off visor for downward tilt
0 - 10 volt dimmable driver
natatorium construction
1 x 200 watts18,600 lumens1
1 x 167 watts15,500 lumens1
1 x 134 watts12,400 lumens1
Adjustable Lamp Housing (+/-15°) - Cast Aluminum
Driver Enclosure - Cast Aluminum with Top Cover Plate
Enclosed LED Glass Frame and Heat Sink Assembly
Driver
Recessed 4" Octagon J-Box (By Others)
LED Boards
Housing Assembly
1
2
3
4
5
6
7
Streamline Indirect 6002LED Detailed Product Description
1
2
3
4
5
7
6
Mounting Plate
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Cut-off Visor Option +/- 15° Field Adjustable Head
12"Ø.343"(4)
Ø2.5"
3.25"
Streamline 6003LED Mini Direct Wall Mount Downlight
6003 WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAdjustable lamp housing: Cast aluminum. Driver enclosure: Cast aluminum with top cover plate. Lens: Solite, tempered glass in captive frame.
Electrical ComponentsLight engine: Aluminum core PCB each with 4 Luxeon 'M' emitters and Ledil Strata - SQ optics. Driver: High efficiency, <20% THD, >90% PF
The 6003LED series is designed for wall mounting over a recessed FS junction box which is located parallel to the luminaire back on the center line. The luminaire mounting plate is secured to the mounting surface outside of the FS box location and the luminaire is hooked on the plate and secured with set screws on the bottom. Silicone sealant is required in wet locations along back and down sides to keep moisture out of wiring compartment.Maximum fixture weight 11 lbs.
The 6003LED optical system is optimized to provide an asymmetric area light distribution with full cutoff classification.
The 6003LED is CSA/UL listed for use in wet locations.
LEDs are rated for 50,000 hour life with lumen maintenance > 70% (L70).
INTERIOR/EXTERIOR
10"
12"
3"
*Standard configuration unless otherwise specified ¹Delivered lumens (4000K) +Consult factory
SAMPLE CATALOG NUMBER: 6003 - 32L - 4K - 120 - T2 - WTUsing this catalog number would order 1 model 6003 mini direct wall mount downlight with a 32 watt, 4000K light engine wired to 120 volts, with type 2 distribution,painted white texture polyester powder coat.
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
120*
208
240
277
347+
DIM 0 - 10 volt dimmable driver
T2
T3
T4
type II distribution
type III distribution
type IV distribution
MODEL COLOR VOLT OPTIONSWATTS COLOR TEMPERATURE
32L 3000K
3500K
4000K
5000K
3K
35K
4K
5K
1 x 32 watts3,100 lumens1
DISTRIBUTION
LED Housing - Cast Aluminum
FS Box 2" x 4" Rectangle (By Others) Mount Horizontally
Heatsink - .188" Aluminum
Light Engine - 4 Luxeon 'M' Emitters with Optics
Glass - Solite, Tempered 5/32" Thick in Captive Frame
Driver Compartment - Cast Aluminum
Driver - High Efficiency, <20% THD and <90% PF
1
2
3
4
5
6
7
Streamline Direct 6003LED Detailed Product Description
1
2
3
4
5
6
Mounting
Ø.281" (2)
Ø1.063"
7
8”
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Streamline 6003ULED Mini Direct Wall Mount Downlight
6003U WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAdjustable lamp housing: Cast aluminum. Driver enclosure: Cast aluminum with top cover plate. Lens: Solite, tempered glass in captive frame.
Electrical ComponentsLight engine: Aluminum core PCB each with 4 Luxeon 'M' emitters and Ledil Strata - SQ optics. Driver: High efficiency, <20% THD, >90% PF
The 6003ULED series is designed for wall mounting over a recessed FS junction box which is located parallel to the luminaire back on the center line. The luminaire mounting plate is secured to the mounting surface outside of the FS box location and the luminaire is hooked on the plate and secured with set screws on the bottom. Silicone sealant is required in wet locations along back and down sides to keep moisture out of wiring compartment.Maximum fixture weight 15 lbs.
The 6003ULED optical system is optimized to provide an asymmetric area light distribution with full cutoff classification.
The 6003ULED is CSA/UL listed for use in wet locations.
LEDs are rated for 50,000 hour life with lumen maintenance > 70% (L70).
INTERIOR/EXTERIOR
10"
12"
3"
*Standard configuration unless otherwise specified ¹Delivered lumens (4000K) +Consult factory
SAMPLE CATALOG NUMBER: 6003U - 32L - 4K - 120 - T2 - WTUsing this catalog number would order 1 model 6003U mini direct wall mount downlight with a 32 watt, 4000K light engine with type II distribution, wired to 120 volts, painted white texture polyester powder coat.
2.25"
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
120*
208
240
277
347+
DIM 0 - 10 volt dimmable driver
T2
T3
T4
type II distribution
type III distribution
type IV distribution
MODEL COLOR VOLT OPTIONSWATTS COLOR TEMPERATURE DISTRIBUTION
32L 3000K
3500K
4000K
5000K
3K
35K
4K
5K
1 x 32 watts3,100 lumens1
LED Housing - Cast Aluminum
FS Box 2" x 4" Rectangle (By Others) Mount Horizontally
Heatsink - .188" Aluminum
Light Engine - 4 Luxeon 'M' Emitters with Optics
Glass - Solite, Tempered 5/32" Thick in Captive Frame
Driver Compartment - Cast Aluminum
Driver - High Efficiency, <20% THD and <90% PF
Cantilever Support Arm - Cast Aluminum
1
2
3
4
5
6
7
8
Streamline Direct 6003ULED Detailed Product Description
1
2
3
4
5
6
Mounting
Ø.281" (2)
Ø1.063"
7
8
8”
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Streamline 6003ZLED Mini Direct Wall Mount Downlight
6003Z WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAdjustable lamp housing: Cast aluminum. Driver enclosure: Cast aluminum with top cover plate. Lens: Solite, tempered glass in captive frame.
Electrical ComponentsLight engine: Aluminum core PCB each with 4 Luxeon 'M' emitters and Ledil Strata - SQ optics. Driver: High efficiency, <20% THD, >90% PF
The 6003ZLED series is designed for wall mounting over a recessed FS junction box which is located parallel to the luminaire back on the center line. The luminaire mounting plate is secured to the mounting surface outside of the FS box location and the luminaire is hooked on the plate and secured with set screws on the bottom. Silicone sealant is required in wet locations along back and down sides to keep moisture out of wiring compartment.Maximum fixture weight 15 lbs.
The 6003ZLED optical system is optimized to provide an asymmetric area light distribution with full cutoff classification.
The 6003ZLED is CSA/UL listed for use in wet locations.
LEDs are rated for 50,000 hour life with lumen maintenance > 70% (L70).
INTERIOR/EXTERIOR
10"
12"
3"
*Standard configuration unless otherwise specified ¹Delivered lumens (4000K) +Consult factory
SAMPLE CATALOG NUMBER: 6003Z - 32L - 4K - 120 - T2 - WTUsing this catalog number would order 1 model 6003Z mini direct wall mount downlight with a 32 watt, 4000K light engine with type II distribution, wired to 120 volts, painted white texture polyester powder coat.
2.25"
2.5"
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
120*
208
240
277
347+
DIM 0 - 10 volt dimmable driver
T2
T3
T4
type II distribution
type III distribution
type IV distribution
MODEL COLOR VOLT OPTIONSWATTS COLOR TEMPERATURE DISTRIBUTION
32L 3000K
3500K
4000K
5000K
3K
35K
4K
5K
1 x 32 watts3,100 lumens1
LED Housing - Cast Aluminum
FS Box 2" x 4" Rectangle (By Others) Mount Horizontally
Heatsink - .188" Aluminum
Light Engine - 4 Luxeon 'M' Emitters with Optics
Glass - Solite, Tempered 5/32" Thick in Captive Frame
Driver Compartment - Cast Aluminum
Driver - High Efficiency, <20% THD and <90% PF
Cantilever Support Arm - Cast Aluminum
1
2
3
4
5
6
7
8
Streamline Direct 6003ZLED Detailed Product Description
1
2
3
4
5
6
Mounting
Ø.281" (2)
Ø1.063"
7
8
8”
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Streamline 6004LED Midi Direct Wall Mount
DISTRIBUTION
6004 120*
208
240
277
347+
T2
T3
T4
type II distribution
type III distribution
type IV distribution
DIM 0 - 10 volt dimmable driver
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAdjustable lamp housing: Cast aluminum. Driver enclosure: Cast aluminum with top cover plate. Light engine enclosure: Cast aluminum sealed to lens frame. Lens: Clear, tempered glass in cast aluminum gasketed frame.
Electrical ComponentsLight engine: Aluminum core PCB each with 4 Luxeon 'M' emitters and Ledil Strata - SQ optics. Driver: High efficiency, <20% THD, >90% PF
The 6004LED series is designed for wall mounting over a 4" octagonal j-box. A heavy gauge mounting plate attaches to the wall surface. Head hooks on to the mounting plate and locks in place with two stainless steel set screws. Silicone seal is required along the top of the driver compartment and down sides to exclude moisture from entering driver compartment.Maximum fixture weight is 32 lbs.
The 6004LED optical system is type II, III or IV with a full cutoff classification.
The 6004LED is listed for use in wet locations to UL and CSA standards.
LEDs are rated for 50,000 hour life with lumen maintenance > 70% (L70).
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
EXTERIOR
14"
18"
4.5"
*Standard configuration unless otherwise specified +Consult factory ¹Delivered lumens (4000K)
SAMPLE CATALOG NUMBER: 6004LED - 134L - 4K - 120 - T2 - WTUsing this catalog number would order 1 model 6004LED midi direct wall mount luminaire with a 134 watt, 4000K light engine with type II distribution, wired to 120 volts, painted white texture polyester powder coat.
MODEL COLOR VOLT OPTIONSWATTS COLOR TEMPERATURE
134L
101L
3000K
3500K
4000K
5000K
3K
35K
4K
5K
1 x 134 watts12,400 lumens1
1 x 101 watts9,300 lumens1
Adjustable Lamp Housing - Cast Aluminum
Driver Enclosure - Cast Aluminum with Top Cover Plate
Enclosed LED Glass Frame and Heat Sink Assembly
Driver
Recessed 4" Octagon J-Box (By Others)
LED Boards 4 x Luxeon 'M' Emitters Each
Housing Assembly
1
2
3
4
5
6
7
Streamline Direct 6004LED Detailed Product Description
1
2
3
4
5
7
6
Mounting Plate
10" Ø.250"(4)
Ø1.563" Center Hole
2.38"
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Streamline 6004ULED Midi Direct Wall Mount
6004U WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAdjustable lamp housing: Cast aluminum. Driver enclosure: Cast aluminum with top cover plate. Light engine enclosure: Cast aluminum sealed to lens frame. Lens: Clear, tempered glass in cast aluminum gasketed frame.
Electrical ComponentsLight engine: Aluminum core PCB each with 4 Luxeon 'M' emitters and Ledil Strata - SQ optics. Driver: High efficiency, <20% THD, >90% PF
The 6004ULED series is designed for wall mounting over a 4" octagonal j-box. A heavy gauge mounting plate attaches to the wall surface. Head hooks on to the mounting plate and locks in place with two stainless steel set screws. Silicone seal is required along the top of the ballast compartment and down sides to exclude moisture from entering ballast compartment.Maximum fixture weight 42 lbs.
The 6004ULED optical system is type II, III or IV with a full cutoff classification.
The 6004ULED is listed for use in wet locations to UL and CSA standards.
LEDs are rated for 50,000 hour life with lumen maintenance > 70% (L70).
EXTERIOR
14"
18"
4.5"
*Standard configuration unless otherwise specified +Consult factory ¹Delivered lumens (4000K)
SAMPLE CATALOG NUMBER: 6004U - 134L - 4K - 120 - T2 - WTUsing this catalog number would order 1 model 6004U midi direct wall mount luminaire with a 134 watt, 4000K light engine, with type II distribution, wired to 120 volts, painted white texture polyester powder coat.
3.3"
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
120*
208
240
277
347+
T2
T3
T4
type II distribution
type III distribution
type IV distribution
DIM 0 - 10 volt dimmable driver
DISTRIBUTIONMODEL COLOR VOLT OPTIONSWATTS COLOR TEMPERATURE
134L
101L
3000K
3500K
4000K
5000K
3K
35K
4K
5K
1 x 134 watts12,400 lumens1
1 x 101 watts9,300 lumens1
Streamline Direct 6004ULED Detailed Product Description
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Adjustable LED Housing - Cast Aluminum
Driver Enclosure - Cast Aluminum with Top Cover Plate
Enclosed LED Glass Frame and Heat Sink Assembly
Driver
Recessed 4" Octagon J-Box (By Others)
LED Boards 4 x Luxeon 'M' Emitters Each
Housing Assembly
Cantilever Support Arm - Cast Aluminum
Mounting Plate
1
2
3
4
5
6
7
8
9
1
2
3
4
5
7
6
8
910"
Ø.250"(4)
Ø1.563"
2.38"
Mounting Plate
Streamline 6004ZLED Midi Direct Wall Mount
6004Z WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAdjustable lamp housing: Cast aluminum. Driver enclosure: Cast aluminum with top cover plate. Light engine enclosure: Cast aluminum sealed to lens frame. Lens: Clear tempered glass in cast aluminum gasketed frame.
Electrical ComponentsLight engine: Aluminum core PCB each with 4 Luxeon 'M' emitters and Ledil Strata - SQ optics. Driver: High efficiency, <20% THD, >90% PF
The 6004ZLED series is designed for wall mounting over a 4" octagonal j-box. A heavy gauge mounting plate attaches to the wall surface. Head hooks on to the mounting plate and locks in place with two stainless steel set screws. Silicone seal is required along the top of the ballast compartment and down sides to exclude moisture from entering ballast compartment.Maximum fixture weight 42 lbs.
The 6004ZLED optical system is type II, III or IV with a full cutoff classification.
The 6004ZLED is listed for use in wet locations to UL and CSA standards.
LEDs are rated for 50,000 hour life with lumen maintenance > 70% (L70).
EXTERIOR
14"
18"
4.5"
*Standard configuration unless otherwise specified +Consult factory ¹Delivered lumens (4000K)
SAMPLE CATALOG NUMBER: 6004Z - 134L - 4K - 120 - T2 - WTUsing this catalog number would order 1 model 6004Z midi direct wall mount luminaire with a 134 watt, 4000K light engine wired to 120 volts, with type II distribution, painted white texture polyester powder coat. Type II distribution.
3.3"
3.6"
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
120*
208
240
277
347+
T2
T3
T4
type II distribution
type III distribution
type IV distribution
DIM 0 - 10 volt dimmable driver
DISTRIBUTIONMODEL COLOR VOLT OPTIONSWATTS COLOR TEMPERATURE
134L
101L
3000K
3500K
4000K
5000K
3K
35K
4K
5K
1 x 134 watts12,400 lumens1
1 x 101 watts9,300 lumens1
Streamline Direct 6004ZLED Detailed Product Description
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Adjustable LED Housing - Cast Aluminum
Driver Enclosure - Cast Aluminum with Top Cover Plate
Enclosed LED Glass Frame and Heat Sink Assembly
Driver
Recessed 4" Octagon J-Box (By Others)
LED Boards 4 x Luxeon 'M' Emitters Each
Housing Assembly
Cantilever Support Arm - Cast Aluminum
Mounting Plate
1
2
3
4
5
6
7
8
9
1
2
3
4
5
7
6
8
910"Ø.250"(4)
Ø1.5"
2.38"
Mounting Plate
Streamline 6005LED Maxi Direct Wall Mount Area Light
6005 WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAdjustable lamp housing: Cast aluminum. Driver enclosure: Cast aluminum with top cover plate. Light engine enclosure: Cast aluminum sealed to lens frame. Lens: Clear tempered glass in cast aluminum gasketed frame.
Electrical ComponentsLight engine: Aluminum core PCB each with 4 Luxeon 'M' emitters and Ledil Strata - SQ optics. Driver: High efficiency, <20% THD, >90% PF
The 6005LED series is designed for wall mounting over a 4" octagonal recessed j-box. Wall must have sufficient strength to support luminaire. A heavy gauge mounting plate attaches to the wall surface. Head hooks on to plate and locks in place with two stainless steel set screws. Silicone seal is required along top of driver compartment and down sides to keep moisture from entering driver compartment.Maximum fixture weight 63 lbs.
The 6005LED optical system is type II, III or IV with a full cutoff classification.
The 6005LED is listed for use in wet locations to UL and CSA standards. LEDs are rated for 50,000 hour life with lumen maintenance > 70% (L70).
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
EXTERIOR
18.5"
24"
6"
*Standard configuration unless otherwise specified +Consult factory ¹Delivered lumens (4000K)
SAMPLE CATALOG NUMBER: 6005 - 200L - 4K - 120 - T2 - WTUsing this catalog number would order 1 model 6005LED maxi direct wall mount luminaire with 200 watt, 4000K light engine wired to 120 volts, with a type II distribution, painted white texture polyester powder coat.
120*
208
240
277
347+
T2
T3
T4
type II distribution
type III distribution
type IV distribution
DIM 0 - 10 volt dimmable driver
DISTRIBUTIONMODEL COLOR VOLT OPTIONSWATTS COLOR TEMPERATURE
200L
167L
134L
3000K
3500K
4000K
5000K
3K
35K
4K
5K
1 x 200 watts18,600 lumens1
1 x 167 watts15,500 lumens1
1 x 134 watts12,400 lumens1
Adjustable Lamp Housing (+/-15°) - Cast Aluminum
Driver Enclosure - Cast Aluminum with Top Cover Plate
Enclosed LED Glass Frame and Heat Sink Assembly
Driver
Recessed 4" Octagon J-Box (By Others)
LED Boards 4 x Luxeon 'M' Emitters Each
Housing Assembly
1
2
3
4
5
6
7
Streamline Direct 6005LED Detailed Product Description
1
2
3
4
5
7
6
Mounting Plate
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
12"Ø.343"(4)
Ø2.5"
3.25"
Streamline 6005ULED Maxi Direct Wall Mount Area Light
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAdjustable lamp housing: Cast aluminum. Driver enclosure: Cast aluminum with top cover plate. Light engine enclosure: Cast aluminum sealed to lens frame. Lens: Clear tempered glass in cast aluminum gasketed frame.
Electrical ComponentsLight engine: Aluminum core PCB each with 4 Luxeon 'M' emitters and Ledil Strata - SQ optics. Driver: High efficiency, <20% THD, >90% PF
The 6005ULED series is designed for wall mounting over a 4" octagonal recessed j-box. Wall must have sufficient strength to support luminaire. A heavy gauge mounting plate attaches to the wall surface. Head hooks on to plate and locks in place with two stainless steel set screws. Silicone seal is required along top of driver compartment and down sides to keep moisture from entering driver compartment.Maximum fixture weight 83 lbs.
The 6005ULED optical system is type II, III or IV with a full cutoff classification.
The 6005ULED is listed for use in wet locations to UL and CSA standards.
LEDs are rated for 50,000 hour life with lumen maintenance > 70% (L70).
EXTERIOR
18.5"
24"
6"
*Standard configuration unless otherwise specified +Consult factory ¹Delivered lumens (4000K)
SAMPLE CATALOG NUMBER: 6005U - 200L - 4K - 120 - T2 - WTUsing this catalog number would order 1 model 6005U maxi direct wall mount luminaire with a 200 watt, 4000K light engine wired to 120 volts, with type II distribution, painted whitetexture polyester powder coat.
4.5"
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
6005U WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
120*
208
240
277
347+
T2
T3
T4
type II distribution
type III distribution
type IV distribution
DIM 0 - 10 volt dimmable driver
DISTRIBUTIONMODEL COLOR VOLT OPTIONSWATTS COLOR TEMPERATURE
200L
167L
134L
3000K
3500K
4000K
5000K
3K
35K
4K
5K
1 x 200 watts18,600 lumens1
1 x 167 watts15,500 lumens1
1 x 134 watts12,400 lumens1
Streamline Direct 6005ULED Detailed Product Description
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Adjustable LED Housing - Cast Aluminum
Driver Enclosure - Cast Aluminum with Top Cover Plate
Enclosed LED Glass Frame and Heat Sink Assembly
Driver
Recessed 4" Octagon J-Box (By Others)
LED Boards 4 x Luxeon 'M' Emitters Each
Housing Assembly
Cantilever Support Arm - Cast Aluminum
Mounting Plate
1
2
3
4
5
6
7
8
9
1
2
3
4
5
7
6
8
9
Mounting Plate
12"Ø.343"(4)
Ø2.5"
3.25"
Streamline 6005ZLED Maxi Direct Wall Mount Area Light
CONSTRUCTION MOUNTING OPTICAL PROTECTION
The 6005ZLED series is designed for wall mounting over a 4" octagonal recessed j-box. Wall must have sufficient strength to support luminaire. A heavy gauge mounting plate attaches to the wall surface. Head hooks on to plate and locks in place with two stainless steel set screws. Silicone seal is required along top of driver compartment and down sides to keep moisture from entering driver compartment.Maximum fixture weight 83 lbs.
The 6005ZLED optical system is type II, III or IV with a full cutoff classification.
The 6005ZLED is listed for use in wet locations to UL and CSA standards. LEDs are rated for 50,000 hour life with lumen maintenance > 70% (L70).
EXTERIOR
18.5"
24"
6"
*Standard configuration unless otherwise specified +Consult factory ¹Delivered lumens (4000K)
SAMPLE CATALOG NUMBER: 6005Z - 200L - 4K - 120 - T2 - WTUsing this catalog number would order 1 model 6005Z maxi direct wall mount luminaire with a 200 watt, 4000K light engine wired to 120 volts, with type II distribution, painted white texture polyester powder coat.
4.5"
4"
MaterialsAdjustable lamp housing: Cast aluminum. Driver enclosure: Cast aluminum with top cover plate. Light engine enclosure: Cast aluminum sealed to lens frame. Lens: Clear tempered glass in cast aluminum gasketed frame.
Electrical ComponentsLight engine: Aluminum core PCB each with 4 Luxeon 'M' emitters and Ledil Strata - SQ optics. Driver: High efficiency, <20% THD, >90% PF
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
120*
208
240
277
347+
T2
T3
T4
type II distribution
type III distribution
type IV distribution
DIM 0 - 10 volt dimmable driver
DISTRIBUTIONMODEL COLOR VOLT OPTIONSWATTS COLOR TEMPERATURE
200L
167L
134L
3000K
3500K
4000K
5000K
3K
35K
4K
5K
1 x 200 watts18,600 lumens1
1 x 167 watts15,500 lumens1
1 x 134 watts12,400 lumens1
6005Z
Streamline Direct 6005ZLED Detailed Product Description
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Adjustable LED Housing - Cast Aluminum
Driver Enclosure - Cast Aluminum with Top Cover Plate
Enclosed LED Glass Frame and Heat Sink Assembly
Driver
Recessed 4" Octagon J-Box (By Others)
LED Boards 4 x Luxeon 'M' Emitters Each
Housing Assembly
Cantilever Support Arm - Cast Aluminum
Mounting Plate
1
2
3
4
5
6
7
8
9
1
2
3
4
5
7
6
8
9
Mounting Plate
12"Ø.343"(4)
Ø2.5"
3.25"
Streamline 6006LED Mini Indirect Ceiling Wash
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAdjustable lamp housing: Cast aluminum. Driver enclosure: Cast aluminum with top cover plate. Lens: Solite, tempered glass in captive frame.
Electrical ComponentsLight engine: Aluminum core PCB each with 4 Luxeon M emitters and Ledil Strata - SQ optics.Driver: High efficiency, <20% THD, >90% PF
The 6006LED series is designed for wall mounting over a recessed FS junction box which is located parallel to the luminaire back on the center line. The luminaire mounting plate is secured to the mounting surface outside of the FS box location and the luminaire is hooked on the plate and secured with set screws on the bottom. The supply wires are connected to the luminaire leads and contained in the FS box cavity.Maximum fixture weight 15 lbs.
The 6006LED optical system is optimized to provide an asymmetric indirect distribution. Head is adjustable (+/- 15°) to customize aiming upon installation, if required.
The 6006LED is normally provided for indoor dry or damp locations to UL and CSA standards but, if ordered, can be made suitable for wet locations to UL and CSA standards. (LOC 4 > 4 FEET)
All units have a protective tempered glass cover and are completely gasketted to exclude any contaminants.
LEDs are rated for 50,000 hour life with lumen maintenance > 70% (L70).
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
INTERIOR/EXTERIOR
10"
12"
3"
*Standard configuration unless otherwise specified ¹Consult factory ²Delivered lumens (4000K)
SAMPLE CATALOG NUMBER: 6006 - 32L - 4K - 120 - WTUsing this catalog number would order 1 model 6006 mini indirect ceiling wash luminaire with a 32 watt, 4000K light engine wired to 120 volts, painted white texture polyester powder coat.
+/- 15°
2.5"
2.25"
MODEL COLOR
6006 WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
VOLT
120*
208
240
277
347¹
32L
OPTIONS
WL
CV
DIM
DF
wet location
cut off visor for downward tilt
dimming driver 0 - 10V control
micro-diffusion film
WATTS COLOR TEMPERATURE
3000K
3500K
4000K
5000K
3K
35K
4K
5K
1 x 32 watts3,100 lumens2
Streamline Indirect 6006LED Detailed Product Description
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
1
2
3
4
5
7
6
88"
Ø1.063"
Ø.281" (2)
Adjustable Housing (+/-15°) - Cast Aluminum
Driver Enclosure - Cast Aluminum with Top Cover Plate
Light Engine, 4 x Luxeon 'M' Emitters with Optics
FS Box 2" x 4" Rectangle (By Others)Mount Horizontally
Glass - Solite, Tempered 5/32" Thick in Captive Frame
Driver, High Efficiency <20% THD, >90% PF
Heatsink Plate
Cantilever Support Arm - Cast Aluminum
1
2
3
4
5
6
7
8
Mounting Plate
Streamline 6007LED Midi Indirect Ceiling Wash
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAdjustable lamp housing: Cast aluminum. Driver enclosure: Cast aluminum with top cover plate. Lens: Clear, tempered glass in captive cast aluminum gasketted frame. Cantilever support arm: Cast aluminum.
Electrical ComponentsLight engine: Aluminum core PCB each with 4 Luxeon M emitters and Ledil Strata - SQ optics.Driver: High efficiency, <20% THD, >90% PF
The 6007LED series is designed for wall mounting over a recessed j-box. Wall must have sufficient strength to support luminaire. The mounting plate is secured to wall and the luminaire is hooked on to the plate and locked in place with set screws.Maximum fixture weight 42 lbs.
The 6007LED optical system is optimized to provide an asymmetric indirect distribution. Head is adjustable (+/- 15°) to customize aiming upon installation, if required.
The 6007LED is normally provided for indoor dry or damp locations to UL and CSA standards but, if ordered, can be made suitable for wet locations to UL and CSA standards. (LOC 4 > 4 FEET)
All units have a protective, tempered, glass shield to protect the LED compartment. The wet location units are totally sealed for wet location usage (IP65).
LEDs are rated for 50,000 hour life with lumen maintenance > 70% (L70).
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
INTERIOR
14"
18"
*Standard configuration unless otherwise specified ¹Delivered lumens (4000K) +Consult factory
SAMPLE CATALOG NUMBER: 6007 - 134L - 4K - 120 - WTUsing this catalog number would order 1 model 6007 midi indirect ceiling wash luminaire with 134 watt, 4000K light engine wired to 120 volts, painted white texture polyester powder coat.
+/- 15° 4.5"
3.6"
3.3"
6007 120*
208
240
277
347+
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
WL
CV
DIM
NAT
wet location
cut off visor for downward tilt
dimming driver 0 - 10V control
natatorium construction
MODEL COLOR VOLT OPTIONSWATTS COLOR TEMPERATURE
134L
101L
3000K
3500K
4000K
5000K
3K
35K
4K
5K
1 x 134 watts12,400 lumens1
1 x 101 watts9,300 lumens1
Streamline Indirect 6007LED Detailed Product Description
Shown with optional cut-off visor Shown with +/-15° adjustment
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Adjustable Lamp Housing (+/-15°) - Cast Aluminum
Driver Enclosure - Cast Aluminum with Top Cover Plate
Enclosed LED Glass Frame and Heat Sink Assembly
Driver
Recessed 4" Octagon J-Box (By Others)
LED Boards 4 x Luxeon 'M' Emitters Each
Housing Assembly
Cantilever Support Arm - Cast Aluminum
Mounting Plate
1
2
3
4
5
6
7
8
9
1
2
3
4
5
7
6
8
9
Mounting Plate
10" Ø.250"(4)
Ø1.563" Center Hole
2.38"
Streamline 6008LED Maxi Indirect Ceiling Wash
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAdjustable lamp housing: Cast aluminum. Driver enclosure: Cast aluminum with top cover plate. Lens: Clear, tempered glass in captive cast aluminum gasketted frame. Cantilever support arm: Cast aluminum.
Electrical ComponentsLight engine: Aluminum core PCB each with 4 Luxeon M emitters and Ledil Strata - SQ optics.Driver: High efficiency, <20% THD, >90% PF
The 6008LED series is designed for wall mounting over a recessed j-box. Wall must have sufficient strength to support luminaire. The mounting plate is secured to wall and the luminaire is hooked on to the plate and locked in place with set screws.Maximum fixture weight 83 lbs.
The 6008LED optical system is optimized to provide an asymmetric indirect distribution. Head is adjustable (+/- 15°) to customize aiming upon installation, if required.
The 6008LED is normally provided for indoor dry or damp locations to UL and CSA standards but, if ordered, can be made suitable for wet locations to UL and CSA standards. (LOC 4)
All units have a protective, tempered, glass shield to protect the LED compartment. The wet location units are totally sealed for wet location usage (IP65).
LEDs are rated for 50,000 hour life with lumen maintenance > 70% (L70).
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
INTERIOR
18.5"
24"
6"
*Standard configuration unless otherwise specified ¹Delivered lumens (4000K) +Consult factory
SAMPLE CATALOG NUMBER: 6008 - 200L - 4K - 120 - WTUsing this catalog number would order 1 model 6008 maxi indirect ceiling wash luminaire with 200 watt, 4000K light engine wired to 120 volts, painted white texture polyester powder coat.
+/- 15°
4"
4.5"
MODEL VOLT OPTIONS COLOR
6008 120*
208
240
277
347+
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
WATTS
200L
167L
134L
3000K
3500K
4000K
5000K
3K
35K
4K
5K
COLOR TEMPERATURE
WL
CV
DIM
NAT
wet location
cut-off visor for downward tilt
0 - 10 volt dimmable driver
natatorium construction
1 x 200 watts18,600 lumens1
1 x 167 watts15,500 lumens1
1 x 134 watts12,400 lumens1
Streamline Indirect 6008LED Detailed Product Description
Shown with optional cut-off visor Shown with +/-15° adjustment
12"Ø.343"(4)
Ø2.5"
3.25"
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Adjustable Lamp Housing (+/-15°) - Cast Aluminum
Driver Enclosure - Cast Aluminum with Top Cover Plate
Enclosed LED Glass Frame and Heat Sink Assembly
Driver
Recessed 4" Octagon J-Box (By Others)
LED Boards 4 x Luxeon 'M' Emitters Each
Housing Assembly
Cantilever Support Arm - Cast Aluminum
Mounting Plate
1
2
3
4
5
6
7
8
9
1
2
3
4
5
7
6
8
9
Mounting Plate
Streamline 6009LED Mini Indirect Ceiling Wash
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAdjustable lamp housing: Cast aluminum. Driver enclosure: Cast aluminum with top cover plate. Lens: Solite, tempered glass in captive frame.
Electrical ComponentsLight engine: Aluminum core PCB each with 4 Luxeon M emitters and Ledil Strata - SQ optics.Driver: High efficiency, <20% THD, >90% PF
The 6009LED series is designed for wall mounting over a recessed FS junction box which is located parallel to the luminaire back on the center line. The luminaire mounting plate is secured to the mounting surface outside of the FS box location and the luminaire is hooked on the plate and secured with set screws on the bottom. The supply wires are connected to the luminaire leads and contained in the FS box cavity.Maximum fixture weight 15 lbs.
The 6009LED optical system is optimized to provide an asymmetric indirect distribution. Head is adjustable (+/- 15°) to customize aiming upon installation, if required.
The 6009LED is normally provided for indoor dry or damp locations to UL and CSA standards but, if ordered, can be made suitable for wet locations to UL and CSA standards. (LOC 4 > 4 FEET)
All units have a protective tempered glass cover and are completely gasketted to exclude any contaminants.
LEDs are rated for 50,000 hour life with lumen maintenance > 70% (L70).
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change wthout notice.
INTERIOR/EXTERIOR
10"
12"
3"
*Standard configuration unless otherwise specified ¹Consult factory ²Delivered lumens (4000K)
SAMPLE CATALOG NUMBER: 6009 - 32L - 4K - 120 - WTUsing this catalog number would order 1 model 6009 mini indirect ceiling wash luminaire with a 32 watt, 4000K light engine wired to 120 volts, painted white texture polyester powder coat.
+/- 15°
2.25"
MODEL COLOR
6009 WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
VOLT
120*
208
240
277
347¹
32L
OPTIONS
WL
CV
DIM
DF
wet location
cut off visor for downward tilt
dimming driver 0 - 10V control
micro-diffusion film
WATTS COLOR TEMPERATURE
3000K
3500K
4000K
5000K
3K
35K
4K
5K
1 x 32 watts3,100 lumens2
Streamline Indirect 6009LED Detailed Product Description
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
1
2
3
4
5
7
6
88"
Ø1.063"
Ø.281" (2)
Mounting Plate
Adjustable Housing (+/-15°) - Cast Aluminum
Driver Enclosure - Cast Aluminum with Top Cover Plate
Light Engine, 4 x Luxeon 'M' Emitters with Optics
FS Box 2" x 4" Rectangle (By Others)Mount Horizontally
Glass - Solite, Tempered 5/32" Thick in Captive Frame
Driver, High Efficiency <20% THD, >90% PF
Heatsink Plate
Cantilever Support Arm - Cast Aluminum
1
2
3
4
5
6
7
8
Streamline 6010LED Midi Indirect Ceiling Wash
CONSTRUCTION MOUNTING OPTICAL PROTECTIONMaterialsAdjustable lamp housing: Cast aluminum. Driver enclosure: Cast aluminum with top cover plate. Lens: Clear, tempered glass in captive cast aluminum gasketted frame. Cantilever support arm: Cast aluminum.
Electrical ComponentsLight engine: Aluminum core PCB each with 4 Luxeon M emitters and Ledil Strata - SQ optics.Driver: High efficiency, <20% THD, >90% PF
The 6010LED series is designed for wall mounting over a recessed j-box. Wall must have sufficient strength to support luminaire. The mounting plate is secured to wall and the luminaire is hooked on to the plate and locked in place with set screws.Maximum fixture weight 42 lbs.
The 6010LED optical system is optimized to provide an asymmetric indirect distribution. Head is adjustable (+/- 15°) to customize aiming upon installation, if required.
The 6010LED is normally provided for indoor dry or damp locations to UL and CSA standards but, if ordered, can be made suitable for wet locations to UL and CSA standards. (LOC 4 > 4 FEET)
All units have a protective, tempered, glass shield to protect the LED compartment. The wet location units are totally sealed for wet location usage (IP65).
LEDs are rated for 50,000 hour life with lumen maintenance > 70% (L70).
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
INTERIOR
14"
18"
4.5"
*Standard configuration unless otherwise specified ¹Delivered lumens (4000K) +Consult factory
SAMPLE CATALOG NUMBER: 6010 - 134L - 4K - 120 - WTUsing this catalog number would order 1 model 6010 midi indirect ceiling wash luminaire with 134 watt, 4000K light engine wired to 120 volts, painted white texture polyester powder coat.
+/- 15°
3.3"
6010 120*
208
240
277
347+
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
WL
CV
DIM
NAT
wet location
cut off visor for downward tilt
dimming driver 0 - 10V control
natatorium construction
MODEL COLOR VOLT OPTIONSWATTS COLOR TEMPERATURE
134L
101L
3000K
3500K
4000K
5000K
3K
35K
4K
5K
1 x 134 watts12,400 lumens1
1 x 101 watts9,300 lumens1
Streamline Indirect 6010LED Detailed Product Description
Shown with optional cut-off visor Shown with +/-15° adjustment
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Adjustable Lamp Housing (+/-15°) - Cast Aluminum
Driver Enclosure - Cast Aluminum with Top Cover Plate
Enclosed LED Glass Frame and Heat Sink Assembly
Driver
Recessed 4" Octagon J-Box (By Others)
LED Boards 4 x Luxeon 'M' Emitters Each
Housing Assembly
Cantilever Support Arm - Cast Aluminum
Mounting Plate
1
2
3
4
5
6
7
8
9
1
2
3
4
5
7
6
8
9
Mounting Plate
10" Ø.250"(4)
Ø1.563" Center Hole
2.38"
Streamline 6011LED Maxi Indirect Ceiling Wash
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAdjustable lamp housing: Cast aluminum. Driver enclosure: Cast aluminum with top cover plate. Lens: Clear, tempered glass in captive cast aluminum gasketted frame. Cantilever support arm: Cast aluminum.
Electrical ComponentsLight engine: Aluminum core PCB each with 4 Luxeon M emitters and Ledil Strata - SQ optics.Driver: High efficiency, 20% THD, >90% PF
The 6011LED series is designed for wall mounting over a recessed j-box. Wall must have sufficient strength to support luminaire. The mounting plate is secured to wall and the luminaire is hooked on to the plate and locked in place with set screws.Maximum fixture weight 83 lbs.
The 6011LED optical system is optimized to provide an asymmetric indirect distribution. Head is adjustable (+/- 15°) to customize aiming upon installation, if required.
The 6011LED is normally provided for indoor dry or damp locations to UL and CSA standards but, if ordered, can be made suitable for wet locations to UL and CSA standards. (LOC 4)
All units have a protective, tempered, glass shield to protect the LED compartment. The wet location units are totally sealed for wet location usage (IP65).
LEDs are rated for 50,000 hour life with lumen maintenance > 70% (L70).
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
INTERIOR
18.5"
24"
6"
*Standard configuration unless otherwise specified ¹Delivered lumens (4000K) +Consult factory
SAMPLE CATALOG NUMBER: 6011 - 200L - 4K - 120 - WTUsing this catalog number would order 1 model 6011 maxi indirect ceiling wash luminaire with a 200 watt, 4000K light engine wired to 120 volts, painted white texture polyester powder coat.
+/- 15°
4.5"
MODEL VOLT OPTIONS COLOR
6011 120*
208
240
277
347+
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
WATTS
200L
167L
134L
3000K
3500K
4000K
5000K
3K
35K
4K
5K
COLOR TEMPERATURE
WL
CV
DIM
NAT
wet location
cut-off visor for downward tilt
0 - 10 volt dimmable driver
natatorium construction
1 x 200 watts18,600 lumens1
1 x 167 watts15,500 lumens1
1 x 134 watts12,400 lumens1
Streamline Indirect 6011LED Detailed Product Description
Shown with optional cut-off visor Shown with +/-15° adjustment
12"Ø.343"(4)
Ø2.5"
3.25"
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Adjustable Lamp Housing (+/-15°) - Cast Aluminum
Driver Enclosure - Cast Aluminum with Top Cover Plate
Enclosed LED Glass Frame and Heat Sink Assembly
Driver
Recessed 4" Octagon J-Box (By Others)
LED Boards 4 x Luxeon 'M' Emitters Each
Housing Assembly
Cantilever Support Arm - Cast Aluminum
Mounting Plate
1
2
3
4
5
6
7
8
9
1
2
3
4
5
7
6
8
9
Mounting Plate
Streamline 6013LED Midi Indirect Pendant
CONSTRUCTION MOUNTING OPTICAL PROTECTIONMaterialsAdjustable lamp housing: Cast aluminum. Driver enclosure: Cast aluminum with top cover plate. Lens: Clear, tempered glass in captive cast aluminum gasketted frame. Mounting stem: Aluminum tubing.
Electrical ComponentsLight engine: Aluminum core PCB each with 4 Luxeon M emitters and Ledil Strata - SQ optics.Driver: High efficiency, <20% THD, >90% PF
The 6013LED luminaire is designed for pendant mounting. The rectangular canopy is designed to mount over a recessed 4" octagon j-box. The stem is 1-1/8" steel tubing with an offset to accommodate the luminaire center of gravity. The canopy is fastened to the ceiling separately from the j-box. Ceiling strength needs to be substantial enough to handle the weight (70 lbs.).
The 6013LED optical system is optimized to provide an asymmetric indirect distribution. Head is adjustable (+/- 15°) to customize aiming upon installation, if required.
The 6013LED is normally provided for indoor dry or damp locations to UL and CSA standards but, if ordered, can be made suitable for wet locations to UL and CSA standards. (LOC 2, covered ceiling)
All units have a protective, tempered, glass shield to protect the LED compartment. The wet location units are totally sealed for wet location usage (IP65).
LEDs are rated for 50,000 hour life with lumen maintenance > 70% (L70).
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
INTERIOR
14"
21.7"
4.5"
*Standard configuration unless otherwise specified ¹Delivered lumens (4000K) +Consult factory
SAMPLE CATALOG NUMBER: 6013 - 134L - 4K - 120 - P24 - WTUsing this catalog number would order 1 model 6013 midi indirect ceiling wash pendant luminaire with a 134 watt, 4000K light engine wired to 120 volts with a pendantlength of 24" and painted white texture polyester powder coat.
+/- 15°
Pendant Length P( __”)
6013 120*
208
240
277
347+
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
P(_”)
WL
CV
DIM
NAT
pendant length
wet location
cut off visor for downward tilt
dimming driver 0 - 10V control
natatorium construction
MODEL COLOR VOLT OPTIONSWATTS COLOR TEMPERATURE
134L
101L
3000K
3500K
4000K
5000K
3K
35K
4K
5K
1 x 134 watts12,400 lumens1
1 x 101 watts9,300 lumens1
Streamline Indirect 6013LED Detailed Product Description
1
2
3
4
5
6
7
8
9Ceiling CanopyAssembly
Cut-off Visor Option +/- 15° Field Adjustable Head
14" x 8"
3"
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Adjustable Lamp Housing (+/-15°) - Cast Aluminum
Driver Enclosure - Cast Aluminum with Top Cover Plate
Enclosed LED Glass Frame and Heat Sink Assembly
Driver
LED Boards 4 x Luxeon 'M' Emitters Each
Mounting Stem - 1 1/8" Tubing
Pendant Mount Bracket - Cast Aluminum
Cantilever Support Arm - Cast Aluminum
Housing Assembly
1
2
3
4
5
6
7
8
9
Streamline 6014LED Maxi Indirect Pendant
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAdjustable lamp housing: Cast aluminum. Driver enclosure: Cast aluminum with top cover plate. Lens: Clear, tempered glass in captive cast aluminum gasketted frame. Mounting stem: Aluminum tubing.
Electrical ComponentsLight engine: Aluminum core PCB each with 4 Luxeon M emitters and Ledil Strata - SQ optics.Driver: High efficiency, <20% THD, >90% PF
The 6014LED luminaire is designed for pendant mounting. The rectangular canopy is designed to mount over a recessed 4" octagon j-box. The stem is 1-1/8" steel tubing with an offset to accommodate the luminaire center of gravity. The canopy is fastened to the ceiling separately from the j-box. Ceiling strength needs to be substantial enough to handle the weight (70 lbs.).
The 6014LED optical system is optimized to provide an asymmetric indirect distribution. Head is adjustable (+/- 15°) to customize aiming upon installation, if required.
The 6014LED is normally provided for indoor dry or damp locations to UL and CSA standards but, if ordered, can be made suitable for wet locations to UL and CSA standards. (LOC 2, covered ceiling)
All units have a protective, tempered, glass shield to protect the LED compartment. The wet location units are totally sealed for wet location usage (IP65).
LEDs are rated for 50,000 hour life with lumen maintenance > 70% (L70).
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
INTERIOR
18.5"
29"
6"
*Standard configuration unless otherwise specified ¹Delivered lumens (4000K) +Consult factory
SAMPLE CATALOG NUMBER: 6014 - 200L - 4K - 120 - P24 - WTUsing this catalog number would order 1 model 6014 maxi indirect ceiling wash pendant luminaire with a 200 watt, 4000K light engine wired to 120 volts with a pendant length of 24" and painted white texture polyester powder coat.
+/- 15°
Pendant Length P( __")
MODEL VOLT OPTIONS COLOR
6014 120*
208
240
277
347+
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
WATTS
200L
167L
134L
3000K
3500K
4000K
5000K
3K
35K
4K
5K
COLOR TEMPERATURE
P(_”)
WL
CV
DIM
NAT
pendant length
wet location
cut-off visor for downward tilt
0 - 10 volt dimmable driver
natatorium construction
1 x 200 watts18,600 lumens1
1 x 167 watts15,500 lumens1
1 x 134 watts12,400 lumens1
Streamline Indirect 6014LED Detailed Product Description
1
2
3
4
5
6
7
8
9Ceiling CanopyAssembly
Cut-off Visor Option +/- 15° Field Adjustable Head
16.5" x 8"
3"
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Adjustable Lamp Housing (+/-15°) - Cast Aluminum
Driver Enclosure - Cast Aluminum with Top Cover Plate
Enclosed LED Glass Frame and Heat Sink Assembly
Driver
LED Boards 4 x Luxeon 'M' Emitters Each
Mounting Stem - 1 1/8" Tubing
Pendant Mount Bracket - Cast Aluminum
Cantilever Support Arm - Cast Aluminum
Housing Assembly
1
2
3
4
5
6
7
8
9
8”
3”
12.2"
6"
Streamline 6016LED Midi Twin Indirect Pendant
CONSTRUCTION MOUNTING OPTICAL PROTECTIONMaterialsAdjustable lamp housing: Cast aluminum. Driver enclosure: Cast aluminum with top cover plate. Lens: Clear, tempered glass in captive cast aluminum gasketted frame. Mounting stem: Aluminum tubing.
Electrical ComponentsLight engine: Aluminum core PCB each with 4 Luxeon M emitters and Ledil Strata - SQ optics.Driver: High efficiency, <20% THD, >90% PF
The 6016LED luminaire is designed for pendant mounting in a twin, back to back configuration. Luminaire heads are coupled to a cast aluminum plate that also terminates the 1-1/8" steel stem. A decorative, rectangular ceiling canopy mounts over a 4" octagon, recessed j-box. Mounting holes are provided to attach to ceiling. Stem length varies. Ceiling strength must be sufficient to support 125 lbs.
The 6016LED optical system is optimized to provide an asymmetric indirect distribution. Head is adjustable (+/- 15°) to customize aiming upon installation, if required.
The 6016LED is normally provided for indoor dry or damp locations to UL and CSA standards but, if ordered, can be made suitable for wet locations to UL and CSA standards. (LOC 2, covered ceiling)
All units have a protective, tempered, glass shield to protect the LED compartment. The wet location units are totally sealed for wet location usage (IP65).
LEDs are rated for 50,000 hour life with lumen maintenance > 70% (L70).
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
INTERIOR
*Standard configuration unless otherwise specified ¹Delivered lumens (4000K) +Consult factory
SAMPLE CATALOG NUMBER: 6016 - 134L - 4K - 120 - P24 - WTUsing this catalog number would order 1 model 6016 midi twin indirect ceiling wash pendant luminaire with 134 watt, 4000K light engines wired to 120 volts with a pendant length of 24" and painted white texture polyester powder coat.
14"
18.3"
4.5"+/- 15°
40"
6016 120*
208
240
277
347+
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
P(_”)
WL
CV
DIM
NAT
pendant length
wet location
cut off visor for downward tilt
dimming driver 0 - 10V control
natatorium construction
MODEL COLOR VOLT OPTIONSWATTS COLOR TEMPERATURE
134L
101L
3000K
3500K
4000K
5000K
3K
35K
4K
5K
2 x 134 watts2 x 12,400 lumens1
2 x 101 watts2 x 9,300 lumens1
Streamline Indirect 6016LED Detailed Product Description
1
2
3
4
5
6
7
8
Ceiling Canopy Assembly
14" x 8"
3"
Cut-off Visor Option +/- 15° Field Adjustable Head
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Adjustable Lamp Housing (+/-15°) - Cast Aluminum
Driver Enclosure - Cast Aluminum with Top Cover Plate
Enclosed LED Glass Frame and Heat Sink Assembly
Driver
LED Boards 4 x Luxeon 'M' Emitters Each
Mounting Stem - 1 1/8" Tubing
Housing AssemblyPendant Mount Bracket - Cast Aluminum
1
2
3
4
5
6
7
8
Streamline 6017LED Maxi Twin Indirect Pendant
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAdjustable lamp housing: Cast aluminum. Driver enclosure: Cast aluminum with top cover plate. Lens: Clear, tempered glass in captive cast aluminum gasketted frame. Mounting stem: Aluminum tubing.
Electrical ComponentsLight engine: Aluminum core PCB each with 4 Luxeon M emitters and Ledil Strata - SQ optics.Driver: High efficiency, <20% THD, >90% PF
The 6017LED luminaire is designed for pendant mounting in a twin, back to back configuration. Luminaire heads are coupled to a cast aluminum plate that also terminates the 1-1/8" stem. A decorative, rectangular ceiling canopy mounts over a 4" octagon, recessed j-box. Mounting holes are provided to attach to ceiling. Stem length varies. Ceiling strength must be sufficient to support 125 lbs.
The 6017LED optical system is optimized to provide an asymmetric indirect distribution. Head is adjustable (+/- 15°) to customize aiming upon installation, if required.
The 6017LED is normally provided for indoor dry or damp locations to UL and CSA standards but, if ordered, can be made suitable for wet locations to UL and CSA standards. (LOC 2, covered ceiling)
All units have a protective, tempered, glass shield to protect the LED compartment. The wet location units are totally sealed for wet location usage (IP65).
LEDs are rated for 50,000 hour life with lumen maintenance > 70% (L70).
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
INTERIOR
*Standard configuration unless otherwise specified ¹Delivered lumens (4000K) +Consult factory
SAMPLE CATALOG NUMBER: 6017 - 200L - 4K - 120 - P24 - WTUsing this catalog number would order 1 model 6017 maxi twin indirect ceiling wash pendant luminaire with a 200 watt, 4000K light engine wired to 120 volts in each luminaire head with a pendant length of 24" and painted white texture polyester powder coat.
18.5"
24"
6"+/- 15°
53"
MODEL VOLT OPTIONS COLOR
6017 120*
208
240
277
347+
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
WATTS
200L
167L
134L
3000K
3500K
4000K
5000K
3K
35K
4K
5K
COLOR TEMPERATURE
P(_”)
WL
CV
DIM
NAT
pendant length
wet location
cut-off visor for downward tilt
0 - 10 volt dimmable driver
natatorium construction
2 x 200 watts2 x 18,600 lumens1
2 x 167 watts2 x 15,500 lumens1
2 x 134 watts2 x 12,400 lumens1
Streamline Indirect 6017LED Detailed Product Description
1
2
3
4
5
6
7
8
Ceiling Canopy Assembly
16.5" x 8"
3"
Cut-off Visor Option +/- 15° Field Adjustable Head
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Adjustable Lamp Housing (+/-15°) - Cast Aluminum
Driver Enclosure - Cast Aluminum with Top Cover Plate
Enclosed LED Glass Frame and Heat Sink Assembly
Driver
LED Boards 4 x Luxeon 'M' Emitters Each
Mounting Stem - 1 1/8" Tubing
Housing AssemblyPendant Mount Bracket - Cast Aluminum
1
2
3
4
5
6
7
8
8”
3”
12.2"
6"
Streamline 6018LED Midi Single Post Top
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAdjustable lamp housing: Cast aluminum. Driver enclosure: Cast aluminum with top cover plate. Light engine enclosure: Cast aluminum sealed to lens frame. Lens: Clear tempered glass in cast aluminum gasketed frame.
Electrical ComponentsLight engine: Aluminum core PCB each with 4 Luxeon 'M' emitters and Ledil Strata - SQ optics. Driver: High efficiency, <20% THD, >90% PF
The 6018LED luminaire is designed for pole top mounting. A cast aluminum pole/luminaire transition is provided to adapt to a 3" diameter tenon or pole. A heavy gauge mounting plate attached to the transition carries the luminaire weight and allows it to be locked to the transition with stainless steel set screws.
The 6018LED optical system is type II, III, IV or V with a full cutoff classification.
The 6018LED is listed for use in wet locations to UL and CSA standards.Windloading EPA = 0.70 sq. ft.
LEDs are rated for 50,000 hour life with lumen maintenance > 70% (L70).
EXTERIOR
14"
20"
4.5"
*Standard configuration unless otherwise specified +Consult factory ¹Delivered lumens (4000K)
SAMPLE CATALOG NUMBER: 6018 - 134L - 4K - 120 - T2 - WTUsing this catalog number would order 1 model 6018 midi single post top luminaire with a 134 watt, 4000K light engine wired to 120 volts, with a type II distribution, painted white texture polyester powder coat.
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
DISTRIBUTION
6018 120*
208
240
277
347+
T2
T3
T4
T5
type II distribution
type III distribution
type IV distribution
type V distribution
DIM 0 - 10 volt dimmable driver
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
MODEL COLOR VOLT OPTIONSWATTS COLOR TEMPERATURE
134L
101L
3000K
3500K
4000K
5000K
3K
35K
4K
5K
1 x 134 watts12,400 lumens1
1 x 101 watts9,300 lumens1
Streamline Direct 6018LED Detailed Product Description
1
2
3
4
5
6
7
8
9
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
LED Housing - Cast Aluminum
Driver Enclosure - Cast Aluminum with Top Cover Plate
Enclosed LED Glass Frame and Heat Sink Assembly
Driver
LED Boards 4 x Luxeon 'M' Emitters Each
Housing Assembly
Pole/Luminaire Transition - Cast Aluminum
Post Top Fitter - Cast Aluminum
3" Diameter Pole or 4" Diameter Pole with 3" Diameter x 4.5" Long Tenon (By Others)
1
2
3
4
5
6
7
8
9
Streamline 6019LED Maxi Single Post Top
CONSTRUCTION MOUNTING OPTICAL PROTECTION
The 6019LED luminaire is designed for pole top mounting. A cast aluminum pole/luminaire transition is provided to adapt to a 4" diameter pole or tenon. A heavy gauge mounting plate attached to the transition carries the luminaire weight and allows it to be locked to the transition with stainless steel set screws.
The 6019LED optical system is type II, III, IV or V with a full cutoff classification.
The 6019LED is listed for use in wet locations to UL and CSA standards.Windloading EPA = 1.14 sq. ft.
LEDs are rated for 50,000 hour life with lumen maintenance > 70% (L70).
EXTERIOR
*Standard configuration unless otherwise specified +Consult factory ¹Delivered lumens (4000K)
SAMPLE CATALOG NUMBER: 6019 - 200L - 4K - 120 - T2 - WTUsing this catalog number would order 1 model 6019 maxi single post top luminaire with a 200 watt, 4000K light engine wired to 120 volts, with a type II distribution, painted white texture polyester powder coat.
28"
18.5"
6"
MaterialsAdjustable lamp housing: Cast aluminum. Driver enclosure: Cast aluminum with top cover plate. Light engine enclosure: Cast aluminum sealed to lens frame. Lens: Clear tempered glass in cast aluminum gasketed frame.
Electrical ComponentsLight engine: Aluminum core PCB each with 4 Luxeon 'M' emitters and Ledil Strata - SQ optics. Driver: High efficiency, <20% THD, >90% PF
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
6019 WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
120*
208
240
277
347+
T2
T3
T4
T5
type II distribution
type III distribution
type IV distribution
type V distribution
DIM 0 - 10 volt dimmable driver
DISTRIBUTIONMODEL COLOR VOLT OPTIONSWATTS COLOR TEMPERATURE
200L
167L
134L
3000K
3500K
4000K
5000K
3K
35K
4K
5K
1 x 200 watts18,600 lumens1
1 x 167 watts15,500 lumens1
1 x 134 watts12,400 lumens1
Streamline Direct 6019LED Detailed Product Description
1
2
3
4
5
6
7
8
9
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
LED Housing - Cast Aluminum
Driver Enclosure - Cast Aluminum with Top Cover Plate
Enclosed LED Glass Frame and Heat Sink Assembly
Driver
LED Boards 4 x Luxeon 'M' Emitters Each
Housing Assembly
Pole/Luminaire Transition - Cast Aluminum
Post Top Fitter - Cast Aluminum
4" Diameter Pole or 5" Diameter Pole with 4" Diameter x 5" Long Tenon (By Others)
1
2
3
4
5
6
7
8
9
Streamline 6020LED Midi Twin Post Top
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAdjustable lamp housing: Cast aluminum. Driver enclosure: Cast aluminum with top cover plate. Light engine enclosure: Cast aluminum sealed to lens frame. Lens: Clear tempered glass in cast aluminum gasketed frame.
Electrical ComponentsLight engine: Aluminum core PCB each with 4 Luxeon 'M' emitters and Ledil Strata - SQ optics. Driver: High efficiency, 20% THD, >90% PF
The 6020LED luminaire is designed for pole top mounting. A cast aluminum pole/luminaire transition is provided to adapt to a 3" diameter tenon or pole. A heavy gauge mounting plate attached to the transition carries the luminaire weight and allows it to be locked to the transition with stainless steel set screws.
The 6020LED optical system is type II, III, IV or V with a full cutoff classification.
The 6020LED is listed for use in wet locations to UL and CSA standards.Windloading EPA = 1.25 sq. ft.
LEDs are rated for 50,000 hour life with lumen maintenance > 70% (L70).
EXTERIOR
14"
40"
4.5"
*Standard configuration unless otherwise specified +Consult factory ¹Delivered lumens (4000K)
SAMPLE CATALOG NUMBER: 6020 - 134L - 4K - 120 - T2 - WTUsing this catalog number would order 1 model 6020 midi twin post top luminaire with a 134 watt, 4000K light engine wired to 120 volts with type II distribution in each luminaire head, painted white texture polyester powder coat.
17.75"
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
DISTRIBUTION
6020 120*
208
240
277
347+
T2
T3
T4
T5
type II distribution
type III distribution
type IV distribution
type V distribution
DIM 0 - 10 volt dimmable driver
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
MODEL COLOR VOLT OPTIONSWATTS COLOR TEMPERATURE
134L
101L
3000K
3500K
4000K
5000K
3K
35K
4K
5K
2 x 134 watts2 x 12,400 lumens1
2 x 101 watts2 x 9,300 lumens1
Streamline Direct 6020LED Detailed Product Description
1
2
3
4
5
6
7
8
9
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
LED Housing - Cast Aluminum
Driver Enclosure - Cast Aluminum with Top Cover Plate
Enclosed LED Glass Frame and Heat Sink Assembly
Driver
LED Boards 4 x Luxeon 'M' Emitters Each
Housing Assembly
Pole/Luminaire Transition - Cast Aluminum
Post Top Fitter - Cast Aluminum
3" Diameter Pole or 4" Diameter Pole with 3" Diameter x 4.5" Long Tenon (By Others)
1
2
3
4
5
6
7
8
9
Streamline 6021LED Maxi Twin Post Top
CONSTRUCTION MOUNTING OPTICAL PROTECTION
The 6021LED luminaire is designed for pole top mounting. A cast aluminum pole/luminaire transition is provided to adapt to a 4" diameter pole or tenon. A heavy gauge mounting plate attached to the transition carries the luminaire weight and allows it to be locked to the transition with stainless steel set screws.
The 6021LED optical system is type II, III, IV or V with a full cutoff classification.
The 6021LED is listed for use in wet locations to UL and CSA standards.Windloading EPA = 2.07 sq. ft.
LEDs are rated for 50,000 hour life with lumen maintenance > 70% (L70).
EXTERIOR
*Standard configuration unless otherwise specified +Consult factory ¹Delivered lumens (4000K)
SAMPLE CATALOG NUMBER: 6021 - 200L - 24 - 4K - 120 - T2 - WTUsing this catalog number would order 1 model 6021 maxi twin post top luminaire with two 200 watt, 4000K light engine wired to 120 volts, with a type II distribution,painted white texture polyester powder coat.
24"
53"
6"
18.5"
MaterialsAdjustable lamp housing: Cast aluminum. Driver enclosure: Cast aluminum with top cover plate. Light engine enclosure: Cast aluminum sealed to lens frame. Lens: Clear tempered glass in cast aluminum gasketed frame.
Electrical ComponentsLight engine: Aluminum core PCB each with 4 Luxeon 'M' emitters and Ledil Strata - SQ optics. Driver: High efficiency, <20% THD, >90% PF
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
6021 WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
120*
208
240
277
347+
T2
T3
T4
T5
type II distribution
type III distribution
type IV distribution
type V distribution
DIM 0 - 10 volt dimmable driver
DISTRIBUTIONMODEL COLOR VOLT OPTIONSWATTS COLOR TEMPERATURE
200L
167L
134L
3000K
3500K
4000K
5000K
3K
35K
4K
5K
2 x 200 watts2 x 18,600 lumens1
2 x 167 watts2 x 15,500 lumens1
2 x 134 watts2 x 12,400 lumens1
Streamline Direct 6021LED Detailed Product Description
1
2
3
4
5
6
7
8
9
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
LED Housing - Cast Aluminum
Driver Enclosure - Cast Aluminum with Top Cover Plate
Enclosed LED Glass Frame and Heat Sink Assembly
Driver
LED Boards 4 x Luxeon 'M' Emitters Each
Housing Assembly
Pole/Luminaire Transition - Cast Aluminum
Post Top Fitter - Cast Aluminum
4" Diameter Pole or 5" Diameter Pole with 4" Diameter x 5" Long Tenon (By Others)
1
2
3
4
5
6
7
8
9
Streamline 6022LED Midi Quad Indirect Pendant
CONSTRUCTION MOUNTING OPTICAL PROTECTIONMaterialsAdjustable lamp housing: Cast aluminum. Driver enclosure: Cast aluminum with top cover plate. Lens: Clear, tempered glass in captive cast aluminum gasketted frame. Mounting stem: Aluminum tubing. Center housing: 12 ga. steel, welded and ground.
Electrical ComponentsLight engine: Aluminum core PCB each with 4 Luxeon M emitters and Ledil Strata - SQ optics.Driver: High efficiency, <20% THD, >90% PF
The 6022LED luminaire is designed for pendant mounting in a quad cluster. The substantial mounting canopy and 1-1/8" stem supports a center housing to which four 6002 luminaire heads are fastened. The canopy covers a recessed 4" octagon j-box. Total luminaire weight is 270 lbs, which must be accommodated by the ceiling construction. Connection of stem is rigid and includes an aircraft cable safety cable. Consult factory for sloped ceiling and earthquake resistant mounting.
The 6022LED optical system is optimized to provide an asymmetric indirect distribution. Head is adjustable (+/- 15°) to customize aiming upon installation, if required.
The 6022LED is normally provided for indoor dry or damp locations to UL and CSA standards but, if ordered, can be made suitable for wet locations to UL and CSA standards. (LOC 2, covered ceiling)
All units have a protective, tempered, glass shield to protect the LED compartment. The wet location units are totally sealed for wet location usage (IP65).
LEDs are rated for 50,000 hour life with lumen maintenance > 70% (L70).
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
INTERIOR
14"
18.3"
4.5"
*Standard configuration unless otherwise specified ¹Delivered lumens per head (4000K) +Consult factory
SAMPLE CATALOG NUMBER: 6022 - 134L - 4K - 120 - P24 - WTUsing this catalog number would order 1 model 6022 midi quad indirect ceiling wash pendant luminaire with 134 watt, 4000K light engines wired to 120 volts in each of the luminaire heads and a pendant length of 24" and painted white texture polyester powder coat.
+/- 15°
52"
6022 120*
208
240
277
347+
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
P(_”)
WL
CV
DIM
NAT
pendant length
wet location
cut off visor for downward tilt
dimming driver 0 - 10V control
natatorium construction
MODEL COLOR VOLT OPTIONSWATTS COLOR TEMPERATURE
134L
101L
3000K
3500K
4000K
5000K
3K
35K
4K
5K
4 x 134 watts4 x 12,400 lumens1
4 x 101 watts4 x 9,300 lumens1
Mounting Stem - 1 1/8" Tubing with Internal 0.125"Aircraft Safety Cable (Length TBA)
Housing Assembly
Quad Mounting Bracket - Heavy Gauge Steel
6
7
8
Streamline Indirect 6022LED Detailed Product Description
1
2
3
4
5
6
Ceiling Canopy
8"
8"
Cut-off Visor Option +/- 15° Field Adjustable Head
7
8
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Adjustable Lamp Housing (+/-15°) - Cast Aluminum
Driver Enclosure - Cast Aluminum with Top Cover Plate
Enclosed LED Glass Frame and Heat Sink Assembly
Driver
LED Boards 4 x Luxeon 'M' Emitters Each
1
2
3
4
5
Streamline 6023LED Maxi Quad Indirect Pendant
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAdjustable lamp housing: Cast aluminum. Driver enclosure: Cast aluminum with top cover plate. Lens: Clear, tempered glass in captive cast aluminum gasketted frame. Mounting stem: Aluminum tubing. Center housing: 12 ga. steel, welded and ground.
Electrical ComponentsLight engine: Aluminum core PCB each with 4 Luxeon M emitters and Ledil Strata - SQ optics.Driver: High efficiency, <20% THD, >90% PF
The 6023LED luminaire is designed for pendant mounting in a quad cluster. The substantial mounting canopy and 1-1/8" stem supports a center housing to which four 6002 luminaire heads are fastened. The canopy covers a recessed 4" octagon j-box. Total luminaire weight is 270 lbs, which must be accommodated by the ceiling construction. Connection of stem is rigid and includes an aircraft cable safety cable. Consult factory for sloped ceiling and earthquake resistant mounting.
The 6023LED optical system is optimized to provide an asymmetric indirect distribution. Head is adjustable (+/- 15°) to customize aiming upon installation, if required.
The 6023LED is normally provided for indoor dry or damp locations to UL and CSA standards but, if ordered, can be made suitable for wet locations to UL and CSA standards. (LOC 2, covered ceiling)
All units have a protective, tempered, glass shield to protect the LED compartment. The wet location units are totally sealed for wet location usage (IP65).
LEDs are rated for 50,000 hour life with lumen maintenance > 70% (L70).
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
INTERIOR
18.5"
24"
6"
*Standard configuration unless otherwise specified ¹Delivered lumens (4000K) +Consult factory
SAMPLE CATALOG NUMBER: 6023 - 200L - 4K - 120 - P24 - WTUsing this catalog number would order 1 model 6023 maxi quad indirect ceiling wash pendant luminaire with a 200 watt, 4000K light engine wired to 120 volts in each of the luminaire heads and a pendant length of 24", painted white texture polyester powder coat.
+/- 15°
69"
MODEL VOLT OPTIONS COLOR
6023 120*
208
240
277
347+
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
WATTS
200L
167L
134L
3000K
3500K
4000K
5000K
3K
35K
4K
5K
COLOR TEMPERATURE
P(_”)
WL
CV
DIM
NAT
pendant length
wet location
cut-off visor for downward tilt
0 - 10 volt dimmable driver
natatorium construction
4 x 200 watts4 x 18,600 lumens1
4 x 167 watts4 x 15,500 lumens1
4 x 134 watts4 x 12,400 lumens1
Mounting Stem - 1 1/8" Tubing with Internal 0.125"Aircraft Safety Cable (Length TBA)
Housing Assembly
Quad Mounting Bracket - Heavy Gauge Steel
6
7
8
Streamline Indirect 6023LED Detailed Product Description
1
2
3
4
5
6
Ceiling Canopy
8"
8"
Cut-off Visor Option +/- 15° Field Adjustable Head
7
8
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Adjustable Lamp Housing (+/-15°) - Cast Aluminum
Driver Enclosure - Cast Aluminum with Top Cover Plate
Enclosed LED Glass Frame and Heat Sink Assembly
Driver
LED Boards 4 x Luxeon 'M' Emitters Each
1
2
3
4
5
Streamline 6030DLED Mini Wall Mount Sconce - Downlight
MODEL LED VOLT OPTIONS COLOR
6030D 7L 120*
277
3 x 2.4w390 lumens+
COLOR TEMPERATURE
30
35
40
3000K
3500K
4000K
WL
DIM
DL
wet location listing
dimming driver (0-10v)
downlight only (4.8w, 353 lumens)
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsLED housing: Pressure die cast aluminum. Light reveal: Frost acrylic. Lens: Prismatic glass.
Electrical ComponentsDriver: Constant current 350mA integral driver. LED boards >82CRI.
The 6030D luminaire is designed to mount over a recessed 4" j-box. A universal mounting plate allows leveling. The unit attaches to a mounting plate that is fixed to the j-box. Two stainless steel set screws lock the luminaire to the mounting plate.
The 6030D luminaire is designed to provide even downlight illumination and soft illumination of the uplight reveal strip.
The 6030D luminaire is listed for use damp/dry locations to UL and CSA standards. ADA compliant. An optional wet location label can be provided.
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
INTERIOR
9.5"
*Standard configuration unless otherwise specified +delivered (353 lumens down/37 lumens up, 4000K)
SAMPLE CATALOG NUMBER: 6030D - 7L - 30 - 120 - WTUsing this catalog number would order 1 model 6030D mini wall mount sconce with 3 x 2.4 watt LED boards with a color temperature of 3000K wired to 120 volts, painted white texture polyester powder coat.
2.9"
9.8"
Light output (lumens)
Watts
Luminaire Efficacy Rating
Color accuracy (CRI)Correlated color temperature (CCT)
390 7.2
54
82 4000K
Rebelle Architectural Lighting
Streamline Sconce 6030DLED Detailed Product Description
Detailed Module Description
Mounting Plate
7"
Ø.25"(4)
7"
1
3
2
4
5
6
7
8
Ø3.5" B.C.DØ2.75" B.C.DØ2.0"
Acrylic Light Reveal
LED Module
4" Octagonal J-Box Recessed (By Others)
Driver - Constant Current
Prismatic Glass Lens
Mounting Plate
Housing - Die Cast Aluminum
Stainless Steel Set Screws
1
2
3
4
5
6
7
8
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Lumen Multipliers
4000K - 1.00
3500K - 0.967
3000K - 0.938
Streamline 6030DSLED Mini Wall Mount Downlight Signage Illuminator
CONSTRUCTION MOUNTING OPTICAL PROTECTION
The 6030DS luminaire is designed to mount over a recessed 4" j-box. A universal mounting plate allows leveling. The unit attaches to a mounting plate that is fixed to the j-box. Two stainless steel set screws lock the luminaire to the mounting plate.Sign mounting kit is supplied to mount in conjunction with the luminaire to provide mounting for sign face. Hardware is supplied.
The 6030DS luminaire is designed to provide even downlight illumination and soft illumination of the uplight reveal strip.
The 6030DS luminaire is listed for use in damp/dry locations to UL and CSA standards. ADA compliant.
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
INTERIOR
9.5"
3"
9.8"
13.5"
Note: Sign panel by others. Sign mounting kit by Rebelle
MODEL LED VOLT COLOR COLOR TEMPERATURE
*Standard configuration unless otherwise specified +delivered (353 lumens down/37 lumens up, 4000K)
SAMPLE CATALOG NUMBER: 6030DSLED - 7L - 30 - 120 - WTUsing this catalog number would order 1 model 6030DS mini wall mount sconce with 3 x 2.4 watt LED boards with a color temperature of 3000K wired to 120 volts, painted white texture polyester powder coat.
MaterialsLamp housing: Pressure die cast aluminum. Light reveal: Frost acrylic. Lens: Prismatic glass.
Electrical ComponentsDriver: Constant current 350mA integral driver. LED boards >82CRI.
6030DS 7L 120*
277
3 x 2.4w390 lumens+
30
35
40
3000K
3500K
4000K
WL
DIM
DL
wet location listing
dimming driver (0-10v)
downlight only (4.8w, 353 lumens)
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
OPTIONS
Rebelle Architectural Lighting
Streamline Sconce 6030DSLED Detailed Product Description
Detailed Module Description
7"
Ø.25"(4)
7"
1
3
2
4
5
6
9
8
Ø3.5" B.C.DØ2.75" B.C.DØ2.0"
Acrylic Light Reveal
LED Module
4" Octagonal J-Box Recessed (By Others)
Driver - Constant Current
Prismatic Glass Lens
Mounting Plate Suitable for mounting over 4" J-Box
Sign Mounting Plate - By Rebelle with Sign MountingFittings, Paint to Match
Housing - Die Cast Aluminum
Stainless Steel Set Screws
1
2
3
4
5
6
7
8
9
SIGN AREA
Sign Panel Detail
1.75"
7"8"
Ø.375"(holes)
2.5"
9.5"
7.500"
.188" .500"
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Light output (lumens)
Watts
Luminaire Efficacy Rating
Color accuracy (CRI)Correlated color temperature (CCT)
390 7.2
54
82 4000K
Lumen Multipliers
4000K - 1.00
3500K - 0.967
3000K - 0.938
Streamline 6030ULED Mini Wall Mount Sconce - Uplight
MODEL LED VOLT COLOR COLOR TEMPERATURE
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsLamp housing: Pressure die cast aluminum. Light reveal: Frost acrylic. Lens: Prismatic glass.
Electrical ComponentsDriver: Constant current 350mA integral driver. LED boards >82CRI.
The 6030U luminaire is designed to mount over a recessed 4" j-box. A universal mounting plate allows leveling. The unit attaches to a mounting plate that is fixed to the j-box. Two stainless steel set screws lock the luminaire to the mounting plate.
The 6030U luminaire is designed to provide even upward light and soft illumination of the downlight reveal strip.
The 6030U luminaire is listed for use damp/dry locations to UL and CSA standards. ADA compliant.
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
INTERIOR
9.5"
*Standard configuration unless otherwise specified +delivered (37 lumens down/353 lumens up, 4000K)
SAMPLE CATALOG NUMBER: 6030U - 7L - 30 - 120 - WTUsing this catalog number would order 1 model 6030U mini wall mount sconce with 3 x 2.4 watt LED boards with a color temperature of 3000K wired to 120 volts, painted white texture polyester powder coat.
2.9"
9.8"
6030U 7L 120*
277
3 x 2.4w390 lumens+
30
35
40
3000K
3500K
4000K
DIM
UL
dimming driver (0-10v)
uplight only (4.8w, 353 lumens)
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
OPTIONS
Rebelle Architectural Lighting
Streamline Sconce 6030ULED Detailed Product Description
Detailed Module Description
Mounting Plate
7"
Ø.25"(4)
7"
1
3
2
4
5
6
7
8
Ø3.5" B.C.DØ2.75" B.C.DØ2.0"
Stainless Steel Set Screws
Mounting Plate
Prismatic Glass Lens
Driver - Constant Current
4" Octagonal J-Box Recessed (By Others)
LED Module
Acrylic Light Reveal
Housing - Die Cast Aluminum
1
2
3
4
5
6
7
8
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Light output (lumens)
Watts
Luminaire Efficacy Rating
Color accuracy (CRI)Correlated color temperature (CCT)
390 7.2
54
82 4000K
Lumen Multipliers
4000K - 1.00
3500K - 0.967
3000K - 0.938
Streamline 6032ZLED Mini Wall Arm Uplight Sconce
MODEL LAMP VOLT COLOUR
6032Z 10L 120*
277
8 x 1.2w285 lumens+
COLOR TEMPERATURE
30 3000K WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsHousing: Pressure die cast aluminum. Light reveal: Frost acrylic.Lens: Prismatic glass - industrex.
Electrical ComponentsLED - 120 volt supply integral drive. Constant current LED board: Aluminum core with thermal interface heat sink.
The 6032ZLED is meant for wall surface mounting over a recessed FS box that is horizontally oriented.
The 6032ZLED luminaire provides uplight with a backsplash of light behind unit on wall. An evenly lighted nose reveal provides a unique feature.
The 6032ZLED is listed for use in damp/dry locations to UL and CSA standards.
www.rebellelighting.com© 2014 REBELLE All rights reserved. R14
INTERIOR
*Standard configuration unless otherwise specified +absolute
SAMPLE CATALOG NUMBER: 6032Z - 10L - 30 - 120 - WTUsing this catalog number would order 1 model 6032Z mini wall arm uplight sconce with 10 watt LED at 3000K wired to 120 volts, painted white texture polyester powder coat.
9.5"
10.5"
3"
5.3"
Light output (lumens)
Projected Life Date - based on LM - 80 data published by Philips Lumileds - Luxeon Rebel LEDs
Recommended Ambient Temperature Range - 40°C to +35°C
L70 = > 70,000 hours @ 35°C ambient.
Driver Case Temperature @ 35°C ambient, 78°C (Max. 90°C)
WattsLumens per watt (Efficacy)
Color accuracy (CRI)
Correlated color temperature (CCT)
Registration NumberModel NumberType
K3AG-8LAWPQ6032ZLEDInterior Wall Mount
9.6
313
33
90
3000K
Ratings are IESNA LM - 79 - 2008
Rebelle Architectural Lighting Lighting Facts
Top Lens Locking Thumb Screws
Chassis - Die Cast Aluminun
Mounting Plate
Single Gang FS J-Box Recessed, Horizontal Mount (By Others)
Top Cover Plate
Top Lens - Tempered Industrex Glass
Light Reveal Element - Machined Acrylic
LED Module with Spread Lens (3)
Rear Lens - Tempered Industrex Glass
Driver - Constant Current
Housing - Die Cast Aluminum
123
456
7891011
Streamline Sconce 6032ZLED Detailed Product Description
Detailed Module Description
2
1
34
5
6
7
8
10
11
9Mounting
7"
Ø.875"
Ø.250"
www.rebellelighting.com© 2014 REBELLE All rights reserved. R14
Streamline 6032Z2PLED Mini Twin Pendant Uplight Sconce INTERIOR
96" max(Field adjustable)
2.9"
21"
9.5"
2.4" 7.5"
MODEL LAMP VOLT COLOUR
6032Z2P 2x10L 120*
277
8 x 1.2w285 lumens+per head
COLOR TEMPERATURE
30 3000K WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsHousing: Pressure die cast aluminum. Light reveal: Frost acrylic.Lens: Prismatic glass - industrex.
Electrical ComponentsLED - 120 volt supply integral drive. Constant current LED board: Aluminum core with thermal interface heat sink.
The 6032Z2PLED luminaire provides mainly uplight. An evenly lighted nose reveal provides a unique feature. Downlight spill is provided by center vertical apertures.
The 6032Z2PLED is listed for use in damp/dry locations to UL and CSA standards.
www.rebellelighting.com© 2014 REBELLE All rights reserved. R14
*Standard configuration unless otherwise specified +absolute
SAMPLE CATALOG NUMBER: 6032Z2PLED - 2x10L - 30 - 120 - WTUsing this catalog number would order 1 model 6032Z2PLED mini twin pendant uplight sconce with two 10 watt LED modules at 3000K wired to 120 volts, painted white texture polyester powder coat.
The 6032Z2PLED is designed for aircraft cable and cabtire suspension - twin aircraft cable is terminated in gripper with safety nut.
Light output (lumens)
Projected Life Date - based on LM - 80 data published by Philips Lumileds - Luxeon Rebel LEDsRecommended Ambient Temperature Range - 40°C to +35°CL70 = > 70,000 hours @ 35°C ambient.Driver Case Temperature @ 35°C ambient, 78°C (Max. 90°C)
WattsLumens per watt (Efficacy)Color accuracy (CRI)Correlated color temperature (CCT)
9.6 313
33
90 3000K
Ratings are IESNA LM - 79 - 2008
Rebelle Architectural Lighting
Detailed Module Description
4" Recessed Octagon J-Box (By Others)
Surface Wiring Canopy
Aircraft Cable Ø.063"
Flexible Power Cable
Cable Hangers
Thumb Screws
Light Reveal - Acrylic
LED Module with Spread Lens (3)
Driver - Constant Current Rear Glass Lens - Industrex
Top Cover with Captive Hardware
Glass - Top, Industrex Lens
123456
789101112
Streamline Sconce 6032Z2PLED Detailed Product Description
21
3
4
5
6
78
91011
12
Ø3.5" B.C.D
5"
Ø2.75" B.C.DØ2.0"
Ø.250"Mounting Plate
Front View
www.rebellelighting.com© 2014 REBELLE All rights reserved. R14
CYL-003 7010LED Wall Up/Down Light
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsHousing / ballast arm: Die formed aluminum. Top / bottom plates: Machined aluminum. Lenses: Solite, tempered glass shield.
Electrical ComponentsDriver/Power Supply: 350 mA, Luxeon 1204 COB, TE collar with interchangable optics (excluding pencil beam option).
The 7010LED uses Chip-on-Board LED modules with Zhaga Book 3 compliant socket and field changeable, high efficiency twist lock reflector.
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18 Specifications subject to change without notice.
INTERIOR/EXTERIOR
SAMPLE CATALOG NUMBER: 7010 - 2x12L - 40 - 120 - SP/FL - WTUsing this catalog number would order 1 model 7010 wall mount up/down luminaire, with two 12 watt LED modules with a color temperature of 4000K wired to 120 volts with a spot optic up and flood optic down painted white texture powder coat.
MODEL SINGLE MODULE VOLT COLOUR
7010 1x12L 120*
208
240
277
347¹
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
OPTIONS OPTICS DOWN
SP
FL
WFL
VWFL
PB4
spot (8°)
flood (15°)
wide flood (33°)
very wide flood (72°)
pencil beam (8 watts)3000K or 4000K only
COLOR TEMPERATURE
40*
30
27
4000K
3000K
2700K
DIM³
90¹
INV
EM
dimming driver (0-10 volt)
high CRI
inverted mount
emergency battery
1 x 12W 1500 lumens²
The 7010LED series is designed for wall mounting. A heavy gauge mounting plate is secured to the wall and mounted independently of the recessed 4" octagon j-box (by others). The main housing hooks on to the mounting plate and is secured by two stainless steel set screws. Silicone seal is required to seal across the back of the ballast arm and down the sides to exclude moisture from entering the ballast compartment.
The 7010LED series is listed for use in wet locations to UL and CSA Standards. L70 minimum at 50,000 hours.
6.5"
5.8"
10.8"
8.2"
8.6”
MODEL DOUBLE MODULE VOLT OPTICS UP OPTIONS OPTICS DOWNCOLOR TEMPERATURE
2x12L 2 x 12W 2 x 1500 lumens²
40*
30
27
4000K
3000K
2700K
120*
208
240
277
347¹
7010 DIM³
90¹
EM
dimming driver (0-10 volt)
high CRI
emergency battery (down module only)
SP
FL
WFL
VWFL
PB4
spot (8°)
flood (15°)
wide flood (33°)
very wide flood (72°)
pencil beam (8 watts)3000K or 4000K only
SP
FL
WFL
VWFL
PB4
spot (8°)
flood (15°)
wide flood (33°)
very wide flood
pencil beam (8 watts)3000K or 4000K only
*Standard configuration unless otherwise specified
¹Consult factory ²Delivered(4000K, 80CRI), not applicable to PB ³Dimming not available with pencil beam optic 4Pencil beam LED module has a nominal LED power of 8 watts, replaces COB module watts. Not available in 347 volt.
CYL-003 7010LED Detailed Description
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18 Specifications subject to change without notice.
1x12L Single Module Options
PB
2 x 12L Double Module Options
Beam Type SP FL WFL
Beam UPOptic
DOWNOptic
15°8° 33°
VWFL
Beam 15°8° 33° 72°
PB
Pending
Pending
72°
BeamOptions
BeamConfigurations
SPFL
WFLVWFL
SPFL
WFLVWFL
SPFL
WFLVWFL
SPFL
WFLVWFL
SPFL
WFLVWFL
PB
PB
PB
SPFL
WFLVWFL
INVERTED MOUNTING(ADD -INV)
PB PB
8.6”
Machined Aluminum Top Plate
Die Formed Aluminum Housing
Tempered, Solite Glass Lens
Luxeon COB LED with Zhaga Book 3 Compliant Socket
Driver (1 or 2, not shown) Constant Current, 350mA. 120-277VOutput Over-Voltage, Output Over-Current and Output ShortCircuit Protection with Auto Recovery
All stainless steel hardware
Mounting Plate
Twist Lock Reflector
Driver Housing
CYL-003 7010LR LED Wall Up/Down Light
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsHousing / ballast arm: Die formed aluminum. Top / bottom plates: Machined aluminum. Lenses: Solite, tempered glass shield. Light reveal: Frosted, machined acrylic.
Electrical ComponentsDriver/Power Supply: 350 mA, Luxeon 1204 COB, TE collar with interchangable optics (excluding pencil beam option). Light Reveal illuminated by a 2 watt (300 source lumen) LED board powered by a 350mA constant current driver.
The 7010LR LED uses Chip-on-Board LED modules with Zhaga Book 3 compliant socket and field changeable, high efficiency twist lock reflector. Pencil beam module has a nominal LED power of 8 watts, replaces 12 watt COB module.
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18 Specifications subject to change without notice.
INTERIOR/EXTERIOR
¹Delivered (80CRI, 4000K) ²Not applicable to PB *Standard configuration unless otherwise specified
SAMPLE CATALOG NUMBER: 7010LR - 2x12L - 40 - 120 - SP/FL - WTUsing this catalog number would order 1 model 7010LR wall mount up/down luminaire, with two 12 watt LED modules with a color temperature of 4000K wired to 120 volts with a spot optic up and flood optic down painted white texture powder coat.
MODEL SINGLE MODULE VOLT COLOUR
7010LR+ 1x12L 120*
208
240
277
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
OPTIONS OPTICS DOWNCOLOR TEMPERATURE
40*
30
4000K
3000K
DIM²
90²
INV
EM
dimming driver (0-10 volt)
high CRI
inverted mount
emergency battery
1 x 12W 1500 lumens1,2
The 7010LR LED series is designed for wall mounting. A heavy gauge mounting plate is secured to the wall and mounted independently of the recessed 4" octagon j-box (by others). The main housing hooks on to the mounting plate and is secured by two stainless steel set screws. Silicone seal is required to seal across the back of the ballast arm and down the sides to exclude moisture from entering the ballast compartment.
The 7010LR LED series is listed for use in wet locations to UL and CSA Standards. L70 minimum at 50,000 hours.
8.6”
MODEL DOUBLE MODULE VOLT OPTICS UP OPTIONS OPTICS DOWNCOLOR TEMPERATURE
2x12L 2 x 12W 2 x 1500 lumens1,2
40*
30
4000K
3000K
120*
208
240
277
7010LR+ DIM²
90²
EM
dimming driver (0-10 volt)
high CRI
emergency battery (down module only)
6.5"
5.8"
10.9"
8"
Light Reveal Feature
+Light Reveal uses a 2 watt LED, when specified with dimming option light reveal is not dimmed
SP
FL
WFL
VWFL
PB3
spot (8°)
flood (15°)
wide flood (33°)
very wide flood (72°)
pencil beam (8 watts)3000K or 4000K only
SP
FL
WFL
VWFL
PB3
spot (8°)
flood (15°)
wide flood (33°)
very wide flood (72°)
pencil beam (8 watts)3000K or 4000K only
SP
FL
WFL
VWFL
PB3
spot (8°)
flood (15°)
wide flood (33°)
very wide flood
pencil beam (8 watts)3000K or 4000K only
CYL-003 7010LR LED Detailed Description
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18 Specifications subject to change without notice.
1x12L Single Module Options
PB
2 x 12L Double Module Options
Beam Type SP FL WFL
Beam UPOptic
DOWNOptic
15°8° 33°
VWFL
Beam 15°8° 33° 72°
PB
Pending
Pending
72°
BeamOptions
BeamConfigurations
SPFL
WFLVWFL
SPFL
WFLVWFL
SPFL
WFLVWFL
SPFL
WFLVWFL
SPFL
WFLVWFL
PB
PB
PB
SPFL
WFLVWFL
INVERTED MOUNTING(ADD -INV)
PB PB
8.6”
Machined Aluminum Top Plate
Die Formed Aluminum Housing
Tempered, Solite Glass Lens
Luxeon COB LED with Zhaga Book 3 Compliant Socket
Driver (1 or 2, not shown) Constant Current, 350mA. 120-277VOutput Over-Voltage, Output Over-Current and Output ShortCircuit Protection with Auto Recovery
All stainless steel hardware
Mounting Plate
Twist Lock Reflector
Driver Housing
Frosted Acrylic Light Reveal .250” Thick
CYL-003 7100LED Wall Mount Up/Down Light
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsHousing / ballast arm: Die formed aluminum. Top / bottom plates: Machined aluminum. Lenses: Solite, tempered glass shield.
Electrical ComponentsDriver/Power Supply: 620mA or 450mA driver with Luxeon 1205 COB, 350mA driver with Luxeon 1204 COB or 900mA driver with Luxeon 1208 COB. TE collar with interchangeable optics.
The 7100LED utilizes Zhaga Book 3 compliant socket with twist lock optics. Optical reflectors lock to modules for various distributions.
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18 Specifications subject to change without notice.
INTERIOR/EXTERIOR
13"
5.8"
10.6"
¹Consult factory ²Delivered (4000K, 80CRI) ³ For 2x**L specify UP optic/specify DOWN optic eg. SP/FL*Standard configuration unless otherwise specified
SAMPLE CATALOG NUMBER: 7100 - 2x23L - 40 - 120 - SP/FL - WTUsing this catalog number would order 1 model 7100 wall mount luminaire, with two 4000K 23 watt LED modules wired to 120 volts, 8° spot beam angle up optic and 15° flood beam angle down optic, painted white texture polyester powder coat.
8"
15"
MODEL LED VOLT COLOUR
7100 1x12L
2x12L
1x16L
2x16L
1x23L
2x23L
1x32L
2x32L
120*
208
240
277
347¹
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
OPTICS DOWN OPTIONS
SP
FL
WFL
VWFL
spot8° beam angleflood15° beam anglewide flood33° beam anglevery wide flood72° beam angle
SP
FL
WFL
VWFL
spot8° beam angleflood15° beam anglewide flood33° beam anglevery wide flood72° beam angle
COLOR TEMPERATURE
40*
30
27
4000K
3000K
2700K
DIM
PC
90
EM
dimmingdriver
photocellcontrol
90 CRI
integralemergencybattery(downlightonly)
1x12W 1500 Lumens²2x12W 1500 Lumens²1x16W 1900 Lumens²2x16W 1900 Lumens²1x23W 2400 Lumens²2x23W 2400 Lumens²1x32W 3550 Lumens²2x32W 3550 Lumens²
The 7100LED series is designed for wall mounting. A heavy gauge mounting plate is secured to the wall and mounted independently of the recessed 4" octagon j-box (by others). The main housing hooks on to the mounting plate and is secured by two stainless steel set screws. Silicone seal is required to seal across the back of the ballast arm and down the sides to exclude moisture from entering the ballast compartment.
The 7100LED series is listed for use in wet locations to UL and CSA Standards. L70 - 70% lumen maintenance @ 50,000 hours. IP53 ingress protection class.Protected against thermal overload, reversed polarity and incorrect power supply condition.
1x**LDOWN
2x**LUP/DOWN
COB with Twist Lock Optics
OPTICS UP(2x**L)3
CYL-003 7100LED Detailed Description
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18 Specifications subject to change without notice.
Die Formed Aluminum Housing
Tempered, Solite Glass Lens
Luxeon COB LED with Zhaga Book 3 Compliant Socket
Driver, 1 (single module) or 2 (double module), Constant Current, 620mA, 450mA or 350mA. 120-277V, Output Over-Voltage, Output Over-Current and Output ShortCircuit Protection with Auto Recovery
All stainless steel hardware
Mounting Plate
Twist Lock Reflector
Driver Housing
10191
20383
30574
40765
1
2
WFL (33° Wide Flood Optic)*FL (15° Flood Optic)*SP (8° Spot Optic)* VWFL (72° Very Wide Flood Optic)*
2588
5176
7765
10353
1
2
1085
2171
3256
4342
1
2
421
841
1262
1683
1
2
+Based on system power.
Lumen Multipliers 3000K - 0.905 2700K - 0.874 90 CRI - 0.873
Product CCT CRI Delivered Lumens Nominal LED Power System Power Lumens per Watt+
7100 - 1 x 12L
7100 - 2 x 12L
7100 - 1 x 16L
7100 - 2 x 16L
7100 - 1 x 23L
7100 - 2 x 23L
7100 - 1 x 32L
7100 - 2 x 32L
4000
4000
4000
4000
4000
4000
4000
4000
80
80
80
80
80
80
80
80
1500
3000
1900
3800
2400
4800
3550
7100
1 x 12 watts
2 x 12 watts
1 x 16 watts
2 x 16 watts
1 x 23 watts
2 x 23 watts
1 x 32 watts
2 x 32 watts
16 watts
29 watts
19 watts
38 watts
27 watts
52 watts
39 watts
78 watts
94
103
100
100
89
92
91
91
*Typical output based on a single 23 watt LED module (down), 4000K
CYL-003 7100LR LED Wall Mount Up/Down Light
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsHousing / ballast arm: Die formed aluminum. Top / bottom plates: Machined aluminum. Lenses: Solite, tempered glass shield. Light reveal: Frosted, machined acrylic.
Electrical ComponentsDriver/Power Supply: 620mA or 450mA driver with Luxeon 1205 COB or 350mA driver with Luxeon 1204 COB. TE collar with interchangeable optics. Light Reveal illuminated by 4 watt (600 source lumens) LED board powered by 350mA constant current driver.
The 7100LR LED utilizes Zhaga Book 3 compliant socket with twist lock optics. Optical reflectors lock to modules for various distributions.
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18 Specifications subject to change without notice.
INTERIOR/EXTERIOR
¹Delivered (80 CRI, 4000K) 2For 2x**L specify UP optic/specify DOWN optic eg. SP/FL*Standard configuration unless otherwise specified
SAMPLE CATALOG NUMBER: 7100LR - 2x23L - 40 - 120 - SP/FL - WTUsing this catalog number would order 1 model 7100LR wall mount luminaire, with two 4000K 23 watt LED modules wired to 120 volts, 8° spot beam angle up optic and 15° flood beam angle down optic, painted white texture polyester powder coat.
MODEL LED VOLT COLOUR
7100LR+ 1x12L
2x12L
1x16L
2x16L
1x23L
2x23L
120*
208
240
277
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
OPTICS DOWN OPTIONS
SP
FL
WFL
VWFL
spot8° beam angleflood15° beam anglewide flood33° beam anglevery wide flood72° beam angle
SP
FL
WFL
VWFL
spot8° beam angleflood15° beam anglewide flood33° beam anglevery wide flood72° beam angle
COLOR TEMPERATURE
40*
30
4000K
3000K
DIM
PC
90
EM
dimmingdriver(0-10 volt)
photocellcontrol
90 CRI
emergencybattery(downlightonly)
1x12W 1500 Lumens1
2x12W 1500 Lumens1
1x16W 1900 Lumens1
2x16W 1900 Lumens1
1x23W 2400 Lumens1
2x23W 2400 Lumens1
The 7100LR LED series is designed for wall mounting. A heavy gauge mounting plate is secured to the wall and mounted independently of the recessed 4" octagon j-box (by others). The main housing hooks on to the mounting plate and is secured by two stainless steel set screws. Silicone seal is required to seal across the back of the ballast arm and down the sides to exclude moisture from entering the ballast compartment.
The 7100LR LED series is listed for use in wet locations to UL and CSA Standards. L70 - 70% lumen maintenance @ 50,000 hours. IP53 ingress protection class.Protected against thermal overload, reversed polarity and incorrect power supply condition.
1x**LDOWN
2x**LUP/DOWN
Light Reveal Feature
OPTICS UP(2x**L)2
5.8"
10.6"
8"
13" 15"
+Light Reveal uses a 4 watt LED
CYL-003 7100LR LED Detailed Description
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18 Specifications subject to change without notice.
Die Formed Aluminum Housing
Tempered, Solite Glass Lens
Luxeon COB LED with Zhaga Book 3 Compliant Socket
Driver, 1 (single module) or 2 (double module), Constant Current, 620mA, 450mA or 350mA. 120-277V, Output Over-Voltage, Output Over-Current and Output ShortCircuit Protection with Auto Recovery
All stainless steel hardware
Mounting Plate
Twist Lock Reflector
Driver Housing
10191
20383
30574
40765
1
2
WFL (33° Wide Flood Optic)*FL (15° Flood Optic)*SP (8° Spot Optic)* VWFL (72° Very Wide Flood Optic)*
2588
5176
7765
10353
1
2
1085
2171
3256
4342
1
2
421
841
1262
1683
1
2
+Based on system power.
Lumen Multipliers 3000K - 0.905 2700K - 0.874 90 CRI - 0.873
Product CCT CRI Delivered Lumens Nominal LED Power System Power Lumens per Watt+
7100LR - 1 x 12L
7100LR - 2 x 12L
7100LR - 1 x 16L
7100LR - 2 x 16L
7100LR - 1 x 23L
7100LR - 2 x 23L
4000
4000
4000
4000
4000
4000
80
80
80
80
80
80
1500
3000
1900
3800
2400
4800
1 x 12 watts
2 x 12 watts
1 x 16 watts
2 x 16 watts
1 x 23 watts
2 x 23 watts
16 watts
29 watts
19 watts
38 watts
27 watts
52 watts
94
103
100
100
89
92
*Typical output based on a single 23 watt LED module (down), 4000K
Frosted Acrylic Light Reveal .250” Thick
CYL-003 7200LED Ceiling Mount Downlight
MODEL LED COLOR TEMPERATURE VOLT COLOUR
7200 120*
208
240
277
347¹
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18 Specifications subject to change without notice.
INTERIOR
15"
8.5"
MOUNTING
SW*
C86
hangstraight swivel mount +/- 5°
ball aligner hanger mount +/-45°
*Standard configuration unless otherwise specified
2.5"
5"
OPTIONS
WL
DIM
90
EM3
wet location listing
dimmingdriver
high CRI
integral emergencybattery
MaterialsSide panels: Die formed aluminum. Top / bottom plates: Machined aluminum. Lens: Solite, tempered glass shield. Hangstraight swivel: Nickel plated, +/- 5°. Canopy: Aluminum.
Electrical ComponentsDriver/Power Supply: 620 mA or 450 mA Luxeon 1205 COB or 900mA Luxeon 1208 COB. TE collar with interchangable optics. 80 CRI, standard.
The 7200LED is designed for ceiling surface mounting. Canopy covers a recessed 4" octagon j-box. A swivel hanger is provided as standard. A 45° hanger is optional. For integral emergency battery the test switch indicator light is mounted to canopy at ceiling. For wet locations luminaire must be restrained from wind action. Special hanger or restraint required (by others).
The 7200LED utilizes "twist and lock" Zhaga collars and modules. Optical reflectors lock to modules for various distributions.
The 7200LED series is listed for use in indoor dry/damp locations to UL and CSA standards. Wet location listing is available as an option.
1x16L
1x23L
1x32L
40*
30
27
4000K
3000K
2700K
SAMPLE CATALOG NUMBER: 7200 - 1x16L - 40 - 120 - FL - SW - WTUsing this catalog number would order 1 model 7200 ceiling mount downlight luminaire, with a 4000K, 16 watt LED module wired to 120 volts, 15° flood beam and a +/-5° hangstraight swivel, painted white texture polyester powder coat.
OPTICS
SP
FL
WFL
VWFL
spot8° beam angleflood15° beam anglewide flood33° beam anglevery wide flood72° beam angle
¹Consult factory ²Delivered (4000K, 80 CRI) 3Must be specified with C86 option
COB with Twist Lock Optics
1x16W 1900 Lumens²
1x23W 2400 Lumens²
1x32W 3550 Lumens²
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18 Specifications subject to change without notice.
CYL-003 7200LED Detailed Description
+Based on system power.
Lumen Multipliers 3000K - 0.905 2700K - 0.874 90 CRI - 0.873
Product CCT CRI Delivered Lumens Nominal LED Power System Power Lumens per Watt+
7200 - 1 x 16L
7200 - 1 x 23L
7200 - 1 x 32L
4000
4000
4000
80
80
80
1900
2400
3550
1 x 16 watts
1 x 23 watts
1 x 32 watts
19 watts
27 watts
39 watts
100
89
91
*Typical output based on a single 23 watt LED module, 4000K
Die Formed Aluminum Housing
Tempered, Solite Glass Lens
Luxeon COB LED with Zhaga Book 3 Compliant Socket
Driver (not shown), Constant Current, 620mA or 450mA. 120-277V, Output Over-Voltage, Output Over-Current and Output ShortCircuit Protection with Auto Recovery
All stainless steel hardware
Canopy
Twist Lock Reflector
10191
20383
30574
40765
1
2
WFL (33° Wide Flood Optic)*FL (15° Flood Optic)*SP (8° Spot Optic)* VWFL (72° Very Wide Flood Optic)*
2588
5176
7765
10353
1
2
1085
2171
3256
4342
1
2
421
841
1262
1683
1
2
CYL-003 7200PLED Pendant Mount Downlight
MODEL LED VOLT COLOUR
7200P 1x16L
1x23L
1x32L
120*
208
240
277
347¹
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
The 7200PLED is designed for pendant stem mounting. Canopy covers a recessed 4" octagon j-box. A swivel hanger is provided as standard. A 45° hanger is optional. For integral emergency battery option test switch is located on canopy at ceiling. For wet locations luminaire must be restrained from wind action. Special hanger or restraint required (by others).
The 7200PLED utilizes "twist and lock" Zhaga collars and modules. Optical reflectors lock to modules for various distributions.
The 7200PLED series is listed for use in indoor dry/damp locations to UL and CSA standards. Wet location listing is available as an option.
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18 Specifications subject to change without notice.
INTERIOR
15"
8.5"
MOUNTING
SW*
C86
hangstraight swivelmount +/- 5°
ball aligner hanger mount+/-45°
COLOR TEMPERATURE
40*
30
27
4000K
3000K
2700K
1x16W 1900 Lumens²
1x23W 2400 Lumens²
1x32W 3550 Lumens²
*Standard configuration unless otherwise specified ¹Consult factory ²Delivered (4000K, 80 CRI) 3Must be specified with C86 option
SAMPLE CATALOG NUMBER: 7200P - 1x16L - 40 - 120 - FL - SW - P24 - WTUsing this catalog number would order 1 model 7200P pendant mount downlight luminaire, with a 4000K, 16 watt LED module wired to 120 volts, 15° flood beam optic with a +/-5° hangstraight swivel and a pendant length of 24", painted white texture polyester powder coat.
variable P( _")
5"
OPTIONS
WL
P( _")
DIM
90
EM3
wet location listing
pendant length
dimmingdriver
high CRI
integralemergencybattery
OPTICS
SP
FL
WFL
VWFL
spot8° beam angleflood15° beam anglewide flood33° beam anglevery wide flood72° beam angle
MaterialsSide panels: Die formed aluminum. Top / bottom plates: Machined aluminum. Lens: Solite, tempered glass shield. Hangstraight swivel: Nickel plated, +/- 5°. Canopy: Aluminum.
Electrical ComponentsDriver/Power Supply: 600 mA or 450 mA Luxeon 1205 COB or 900mA Luxeon 1208 COB. 80 CRI, standard. TE collar with interchangable optics.
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18 Specifications subject to change without notice.
CYL-003 7200PLED Detailed Description
+Based on system power.
Lumen Multipliers 3000K - 0.905 2700K - 0.874 90 CRI - 0.873
Product CCT CRI Delivered Lumens Nominal LED Power System Power Lumens per Watt+
7200P - 1 x 16L
7200P - 1 x 23L
7200P - 1 x 32L
4000
4000
4000
80
80
80
1900
2400
3550
1 x 16 watts
1 x 23 watts
1 x 32 watts
19 watts
27 watts
39 watts
100
89
91
*Typical output based on a single 23 watt LED module, 4000K
Die Formed Aluminum Housing
Tempered, Solite Glass Lens
Luxeon COB LED with Zhaga Book 3 Compliant Socket
Driver (not shown), Constant Current, 620mA or 450mA. 120-277V, Output Over-Voltage, Output Over-Current and Output ShortCircuit Protection with Auto Recovery
All stainless steel hardware
Canopy
Twist Lock Reflector
10191
20383
30574
40765
1
2
WFL (33° Wide Flood Optic)*FL (15° Flood Optic)*SP (8° Spot Optic)* VWFL (72° Very Wide Flood Optic)*
2588
5176
7765
10353
1
2
1085
2171
3256
4342
1
2
421
841
1262
1683
1
2
CYL-003 7600LED Indirect Streetscape Post Top - Asymmetric Distribution
MODEL LED COLOR TEMPERATURE COLOUR
7600LED 40*
35
30
VOLT
120*
208
240
277
347¹
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsShade: One piece, marine grade cast aluminum. Reflector: White powder coated, aluminum. Arms: Brushed stainless steel tube. Housing: Die formed aluminum. Reflector: Embossed, specular high reflectance aluminum. Lens: IP65 rated silicone optic. Pole fitter: One piece, marine grade, cast aluminum.
Electrical ComponentsIntegral Driver, IP66 rated, Input surge protection: 4kV line-line, 6kV line-earth.
The 7600LED is designed to mount to a 4" overall diameter pole or tenon. Tenon to be 4" long or more. Six 1/4 - 20 stainless steel set screws are provided.
Directional LED module with a large IP65 rated silicone optic. Light is redirected asymmetrically by the high gloss white polyester powder coat reflector on the under side of the decorative shade. B1-U4-G3
The 7600LED is listed for use in wet locations to UL and CSA standards. Windloading EPA = 3.73 sq. ft.
www.rebellelighting.com 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.C
EXTERIOR
17"24"
*Standard configuration unless otherwise specified ¹Consult factory 2Delivered
SAMPLE CATALOG NUMBER: 7600LED - 60L - 40 - 120 - WTUsing this catalog number would order 1 model 7600LED indirect asymmetric post top with a single 60 watt LED COB module with a color temperature of 4000Kwired to a 120 volt, painted white texture polyester powder coat. Poles supplied separately.
35"
36"
35"
4000K
3500K
3000K
OPTIONS
DIM
SP
dimming (0-10 volt)
surge protector 20kV
60L
50L
40L
60 watts5055 lumens2
50 watts4000 lumens2
40 watts3000 lumens2
Shade - One Piece Marine Grade Cast AluminumReflector - High Gloss White Powder Coated AluminumArms - (3) #4 Brushed Finish 3/4" Diameter Stainless Steel Bar with Aluminum Universal Mount HingesIP65 Rated Silicone OpticChip-On-Board LED
Triangular Cylinder Housing - .064” AluminumIntegral DriverPole Fitter - One Piece Marine Grade Cast AluminumSix 1/4 - 20 Stainless Steel Set ScrewsPole (Not Included - Order Separately) Ø4.0"
12
3
45
678910
CYL-003 7600LED Detailed Product Description
1
2
3
4
5
6
78
9
10
www.rebellelighting.com© 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.
CYL-003 7600TLED Indirect Wall Arm - Asymmetric Distribution
MODEL LED COLOR TEMPERATURE COLOUR
7600TLED 40*
35
30
VOLT
120*
208
240
277
347¹
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsShade: One piece, marine grade cast aluminum. Reflector: White powder coated, aluminum. Arms: Brushed stainless steel tube. Housing: Die formed aluminum. Wall arm: Extruded aluminum arm. Lens: IP65 rated silicone optic.
Electrical ComponentsIntegral Driver, IP66 rated, Input surge protection: 4kV line-line, 6kV line-earth.
The 7600TLED is a wall mounting base down indirect luminaire. Luminaire is mounted to a wall surface with a recessed 4" j-box. A heavy gauge mounting plate is utilized to allow unit to hook over the top flange and lock to the bottom using stainless steel set screws.
Directional LED module with a large IP65 rated silicone optic. Light is redirected asymmetrically by the high gloss white polyester powder coat reflector on the under side of the decorative shade. B1-U4-G3
The 7600TLED is listed for use in wet locations to UL and CSA standards.
www.rebellelighting.com 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.C
EXTERIOR
*Standard configuration unless otherwise specified ¹Consult factory 2Delivered
SAMPLE CATALOG NUMBER: 7600TLED - 60L - 40 - 120 - WTUsing this catalog number would order 1 model 7600TLED indirect asymmetric wall arm luminaire with a single 60 watt LED COB module with a color temperature of 4000K wired to a 120 volt, painted white texture polyester powder coat.
35"
4000K
3500K
3000K
OPTIONS
DIM
SP
dimming (0-10 volt)
surge protector 20kV
60L
50L
40L
60 watts5055 lumens2
50 watts4000 lumens2
40 watts3000 lumens2
17"24"
36"
15"
43"
22.5"
Shade - One Piece Marine Grade Cast AluminumReflector - High Gloss White Powder Coated AluminumArms - (3) #4 Brushed Finish 3/4" Diameter Stainless Steel Bar with Aluminum Universal Mount HingesIP65 Rated Silicone OpticChip-On-Board LED
Triangular Cylinder Housing - .064” AluminumIntegral DriverFitter - One Piece Marine Grade Cast AluminumSix 1/4 - 20 Stainless Steel Set ScrewsWall Arm - Extruded Aluminum
12
3
45
678910
CYL-003 7600TLED Detailed Product Description
1
2
3
4
5
6
78
9
10
www.rebellelighting.com© 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsShade: One piece, marine grade cast aluminum. Reflector: White powder coated, aluminum. Arms: Brushed stainless steel tube. Housing: Die formed aluminum. Reflector: Embossed, specular high reflectance aluminum. Lens: IP65 rated silicone optic. Pole fitter: One piece, marine grade, cast aluminum.
Electrical ComponentsIntegral Driver, IP66 rated, Input surge protection: 4kV line-line, 6kV line-earth.
The 7601LED is designed to mount to a 4" overall diameter pole or tenon. Tenon to be 4" long or more. Six 1/4 - 20 stainless steel set screws are provided.
The 7601LED offers a directional LED module with large IP65 rated silicone optic. Light is redirected symmetrically by the high gloss white polyester powder coat reflector on the under side of the decorative shade.
The 7601LED is listed for use in wet locations to UL and CSA standards. Windloading EPA = 3.73 sq. ft.
www.rebellelighting.com 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice. C
EXTERIOR
*Standard configuration unless otherwise specified ¹Consult factory 2Delivered
SAMPLE CATALOG NUMBER: 7601LED - 60L - 40 - 120 - WTUsing this catalog number would order 1 model 7601LED indirect symmetric post top with a single 60 watt LED COB module with a color temperature of 4000K wired to a 120 volts, painted white texture polyester powder coat. Poles supplied separately.
17"
32"
35"
35"
7601LED 40*
35
30
120*
208
240
277
347¹
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
4000K
3500K
3000K
DIM
SP
dimming (0-10 volt)
surge protector 20kV
CYL-003 7601LED Indirect Streetscape Post Top - Symmetric Distribution
MODEL LED COLOR TEMPERATURE COLOUR VOLT OPTIONS
60L
50L
40L
60 watts5038 lumens2
50 watts4000 lumens2
40 watts3000 lumens2
Shade - One Piece Marine Grade Cast AluminumReflector - High Gloss White Powder Coated AluminumArms - (3) #4 Brushed Finish 3/4" Diameter Stainless Steel Bar with Aluminum Universal Mount HingesIP65 Rated Silicone OpticChip-On-Board LED
Triangular Cylinder Housing - .064” AluminumIntegral DriverPole Fitter - One Piece Marine Grade Cast AluminumSix 1/4 - 20 Stainless Steel Set ScrewsPole (Not Included - Order Separately) Ø4.0"
12
3
45
678910
CYL-003 7601LED Detailed Product Description
1
2
3
4
5
6
78
9
10
www.rebellelighting.com© 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.
Sightlines 1185LED Maxi Step/Path Low Level Area Light
MODEL LED VOLT COLOR
1185 15L
7L
120*
208
240
277
347
40 x 0.28 watts1580 lumens1
20 x 0.30 watts825 lumens1
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsFaceplate: Cast aluminum. Housing: .064" aluminum protected with high gloss white polyester powder coat. Lens: Tempered, sealed prismatic (#73) glass. Junction box: Gasketted, die cast aluminum, bottom mounted (field adjustable to rear mount), suitable for through branch circuit conductors, suitable for 90°C. (3) - 1/2 NPT plugs, neoprene rubber gaskets.
Electrical componentsConstants current driver, 460mA (15L), 500mA (7L). LED boards >82CRI.
The Sightlines 1185LED series is designed for concrete pour installations and hollow wall construction. Units are non IC rated so the insulation, if any, must be kept 3" away from the housing and the housing should have 1/2" clearance all around except at the mounting points/surface. See Installation Instructions on the Rebelle website for further details. Conduits must be sealed against water entry into the fixture housing as outlined in the National Electric Code.
The Sightlines 1185LED series is a large scale recessed pathway light. Mounting heights vary but 3' to 4' from grade is normal. LED boards are recessed in the faceplate with integral louvers shielding the source.
The Sightlines 1185LED series is listed for use in wet locations within four feet of the ground to CSA and UL standards. Conduit must be sealed to exclude water from entering the housing.
EXTERIOR
*Standard configuration unless otherwise specified
SAMPLE CATALOG NUMBER: 1185 - 15L - 40 - 120 - WTUsing this catalog number would order 1 model 1185 low level area light with 40 x 0.28 watt LEDs at 4000K wired to 120 volts with standard bottom mount junction box with 1/2 NPT threads and a faceplate painted with white texture.
9.75"
12"
SIDE VIEW
BOTTOM VIEW
OPTIONS
DIM
EM
dimming driver0 - 10 volts
emergency battery
COLOR TEMPERATURE
40*
30
4000K
3000K
5.5"
11.2"
2"
2"
9"
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
1 Source lumens
Housing .064" Aluminum Protected with White Polyester Powder Coat
Heatsink
LED Modules
Cast Aluminum Louvered, Gasketed Faceplate
Tempered and Sealed Prismatic Glass Lens
(2) 1/4 - 20 Stainless Steel Hex Socket Cap Screws - Captive
Driver - Constant Current, IP66
Junction Box - Suitable for 4 No. 12 AWG Through Branch Circuit Conductors Suitable for 90°C. (3) - 1/2 NPT Plugs, Neoprene Rubber Gaskets, Bottom Mount Standard(Field Adjustable to Rear Mount)
1
2
3
4
5
6
7
8
Sightlines 1185LED Detailed Product Description
1
2
3
4
5
6
7
8
Concrete Pouror
Hollow Wall
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Sightlines 1573LED Maxi Step/Path Low Level Area Light
MODEL LED VOLT COLOR
1573 120*
208
240
277
COLOR TEMPERATURE
40*
30
4000K
3000K
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsFaceplate: Cast aluminum. Housing: .064" aluminum protected with high gloss white polyester powder coat. Lens: Tempered, sealed prismatic glass. Junction box: Gasketted, die cast aluminum, bottom mounted (field adjustable to rear mount) suitable for through branch circuit conductors, suitable for 90°C. (3) - 1/2 NPT plugs, neoprene rubber gaskets.
Electrical componentsLED driver constant current, 460mA (15L) or 550mA (7L). LED boards >82CRI.
The Sightlines 1573LED series is designed for concrete pour installations and hollow wall construction in compact fluorescent versions. Units are non IC rated so the insulation, if any, must be kept 3" away from the housing and the housing should have 1/2" clearance all around except at the mounting points/surface. See Installation Instructions on the Rebelle website for further details. Conduits must be sealed against water entry into the fixture housing as outlined in the National Electric Code.
The 1573LED units are designed to be mounted within 1' to 2' feet of the ground or floor level. The faceplate is provided in a louvered style to eliminate glare and provide illumination on paths, aisles and stairs. An open face with a prismatic glass lens is available for areas that require higher intensity levels. The reflector system is sealed against the ingress of water and other contaminants.
The Sightlines 1573LED series is listed for usage in wet locations within four feet of the ground to CSA and UL standards. Conduit must be sealed to exclude water from entering the housing.
www.rebellelighting.com© 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.
EXTERIOR
FACEPLATE
LV*
PR
louvered
open
*Standard configuration unless otherwise specified
SAMPLE CATALOG NUMBER: 1573 - 15L - 40 - 120 - LV - WT
8"
9"
Using this catalog number would order 1 model 1573 low level area light with 40 x 0.28 watt LEDs with a color temperature of 4000K wired to 120 volts and a louvered faceplate painted with white texture.
2"
10"
12"
OPTIONS
DIM dimming driver0 - 10 volts
SIDE VIEW
BOTTOM VIEW
9"
9"
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
15L
7L
40 x 0.28 watts1580 lumens1
20 x 0.30 watts825 lumens1
1 Source lumens
Gasketed Faceplate - Cast Aluminum
Housing .064" Aluminum Protected with White Polyester Powder Coat
Thermal Heat Sink Panel
LED Module
Tempered and Sealed Prismatic Glass Lens
(4) #10 - 24 Flat HD Cap Screws - Stainless
LED Driver - Constant Current IP66
Junction Box - Suitable for 4 No. 12 AWG Through Branch Circuit Conductors Suitable for 90°C. (3) - 1/2 NPT Plugs, Neoprene Rubber Gaskets, Bottom Mount Standard (Back mount is field adjustable)
1
2
3
4
5
6
7
8
Sightlines 1573LED Detailed Product Description
1
2
3
4
5
6
7
8
Concrete Pour & HollowWall Applications
www.rebellelighting.com© 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.
Sightlines 1573RLED Maxi Step/Path Low Level Area Light
MODEL LED VOLT COLOR
1573R 120*
208
240
277
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsFaceplate: Cast aluminum. Housing: .064" aluminum protected with high gloss white polyester powder coat. Lens: Tempered, sealed prismatic glass. Junction box: Gasketted, die cast aluminum, bottom mounted (field adjustable to rear mount) suitable for through branch circuit conductors, suitable for 90°C. (3) - 1/2 NPT plugs, neoprene rubber gaskets.
Electrical componentsLED driver constant current, integral mounted, 460mA (15L) or 500mA (7L). LED boards >82 CRI.
The Sightlines 1573R series is designed for concrete pour installations and hollow wall construction. Units are non IC rated so the insulation, if any, must be kept 3" away from the housing and the housing should have 1/2" clearance all around except at the mounting points/surface. See Installation Instructions on the Rebelle website for further details. Conduits must be sealed against water entry into the fixture housing as outlined in the National Electric Code.
The 1573R units are designed to be mounted within 1' to 2' feet of the ground or floor level. The faceplate is provided in a louvered style to eliminate glare and provide illumination on paths, aisles and stairs. An open face with a prismatic glass lens is available for areas that require higher intensity levels. The reflector system is sealed against the ingress of water and other contaminants.
The Sightlines 1573R series is listed for usage in wet locations within four feet of the ground to CSA and UL standards. Conduit must be sealed to exclude water from entering the housing.
www.rebellelighting.com © 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.
EXTERIOR
FACEPLATE
LV*
PR
louvered
open
*Standard configuration unless otherwise specified
SAMPLE CATALOG NUMBER: 1573R - 15L - 40 - 120 - LV - WT
8"
9.5" DIA.
Using this catalog number would order 1 model 1573R low level area light with 40 x 0.28 watt LEDs with a color temperature of 4000K wired to 120 volts and a louvered faceplate painted with white texture polyester powder coat.
2"
10"
12"
OPTIONS
DIM dimming driver0 - 10 volts
COLOR TEMPERATURE
40*
30
4000K
3000K
SIDE VIEW
BOTTOM VIEW
9.5" DIA.
15L
7L
40 x 0.28 watts1580 lumens1
20 x 0.30 watts825 lumens1
1 Source lumens
Gasketed Faceplate - Cast Aluminum
Housing .064" Aluminum Protected with White Polyester Powder Coat
Thermal Heat Sink Panel
LED Module
Tempered and Sealed Prismatic Glass Lens
(2) #10 - 24 Flat HD Cap Screws - Stainless - Captive
LED Driver - Constant Current IP66
Junction Box - Suitable for 4 No. 12 AWG Through Branch Circuit Conductors Suitable for 90°C. (3) - 1/2 NPT Plugs, Neoprene Rubber Gaskets, Bottom Mount Standard (Back Mount is Field Adjustable)
1
2
3
4
5
6
7
8
Sightlines 1573RLED Detailed Product Description
www.rebellelighting.com © 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.
1
2
3
4
5
6
7
8
Concrete Pour & HollowWall Applications
Sightlines 1573RSSLED Maxi Step/Path Low Level Area Light
MODEL LED VOLT COLOR
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsFaceplate: Stainless steel, #4 brushed finish. Housing: .064" aluminum protected with high gloss white polyester powder coat. Lens: Tempered, sealed prismatic glass. Junction box: Gasketted, die cast aluminum, bottom mounted (field adjustable to rear mount) suitable for through branch circuit conductors, suitable for 90°C. (3) - 1/2 NPT plugs, neoprene rubber gaskets.
Electrical componentsLED driver constant current, integral mounted, 460mA (15L) or 500mA (7L). LED boards >82 CRI.
The Sightlines 1573RSSLED series is designed for concrete pour installations and hollow wall construction. Units are non IC rated so the insulation, if any, must be kept 3" away from the housing and the housing should have 1/2" clearance all around except at the mounting points/surface. See Installation Instructions on the Rebelle website for further details. Conduits must be sealed against water entry into the fixture housing as outlined in the National Electric Code.
The 1573RSSLED units are designed to be mounted within 1' to 2' feet of the ground or floor level. The faceplate is provided in a slotted style to eliminate glare and provide illumination on paths, aisles and stairs. An open face with a prismatic glass lens is available for areas that require higher intensity levels. The reflector system is sealed against the ingress of water and other contaminants.
The Sightlines 1573RSSLED series is listed for use in wet locations within four feet of the ground to CSA and UL standards. Conduit must be sealed to exclude water from entering the housing.
www.rebellelighting.com © 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.
EXTERIOR
FACEPLATE
8"
9.5" DIA.
2"
10"
12"
OPTIONSCOLOR TEMPERATURE
SIDE VIEW
BOTTOM VIEW
9.5" DIA.
1573RSS 120*
208
240
277
40*
30
4000K
3000K
LV*
PR
slotted
open
*Standard configuration unless otherwise specified
SAMPLE CATALOG NUMBER: 1573RSS - 15L - 40 - 120 - LV - WTUsing this catalog number would order 1 model 1573RSS low level area light with 40 x 0.28 watt LEDs with a color temperature of 4000K wired to 120 volts with a slotted stainless steel faceplate.
DIM dimming driver0 - 10 volts
SS Stainless steelrequires periodicmaintenance toremove dirt and contaiminants, similar to householdstainless steel.
15L
7L
40 x 0.28 watts1580 lumens1
20 x 0.30 watts825 lumens1
1 Source lumens
Gasketed Faceplate - Stainless Steel with Enclosure Trim
Housing Aluminum Protected with White Polyester Powder Coat
Thermal Heat Sink Panel
LED Module
Tempered and Sealed Prismatic Glass Lens
(2) #10 - 24 Flat HD Cap Screws - Stainless - Captive
LED Driver - Constant Current IP66
Junction Box - Suitable for 4 No. 12 AWG Through Branch Circuit Conductors Suitable for 90°C. (3) - 1/2 NPT Plugs, Neoprene Rubber Gaskets, Bottom Mount Standard (Back Mount is Field Adjustable)
1
2
3
4
5
6
7
8
Sightlines 1573RSSLED Detailed Product Description
www.rebellelighting.com © 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.
1
2
3
4
5
6
7
8
Concrete Pour & HollowWall Applications
Sightlines 1573SSLED Maxi Step/Path Low Level Area Light
MODEL LED VOLT COLOR
1573SS 120*
208
240
277
COLOR TEMPERATURE
40*
30
4000K
3000K
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsFaceplate: Stainless steel, #4 brushed finish. Housing: .064" aluminum protected with high gloss white polyester powder coat. Lens: Tempered, sealed prismatic glass. Junction box: Gasketted, die cast aluminum, bottom mounted (field adjustable to rear mount) suitable for through branch circuit conductors, suitable for 90°C. (3) - 1/2 NPT plugs, neoprene rubber gaskets.
Electrical componentsLED driver constant current, integral mounted, 460mA (15L) or 500mA (7L). LED boards >82CRI.
The Sightlines 1573SSLED series is designed for concrete pour installations and hollow wall construction in compact fluorescent versions. Units are non IC rated so the insulation, if any, must be kept 3" away from the housing and the housing should have 1/2" clearance all around except at the mounting points/surface. See Installation Instructions on the Rebelle website for further details. Conduits must be sealed against water entry into the fixture housing as outlined in the National Electric Code.
The 1573SSLED units are designed to be mounted within 1' to 2' feet of the ground or floor level. The faceplate is provided in a slotted style to eliminate glare and provide illumination on paths, aisles and stairs. An open face with a prismatic glass lens is available for areas that require higher intensity levels. The reflector system is sealed against the ingress of water and other contaminants.
The Sightlines 1573SSLED series is listed for use in wet locations within four feet of the ground to CSA and UL standards. Conduit must be sealed to exclude water from entering the housing.
www.rebellelighting.com© 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.
EXTERIOR
FACEPLATE
LV*
PR
slotted
open
*Standard configuration unless otherwise specified
SAMPLE CATALOG NUMBER: 1573SS - 15L - 40 - 120 - LV - WT
8"
9"
Using this catalog number would order 1 model 1573SS low level area light with 40 x 0.28 watt LEDs with a color temperature of 4000K wired to 120 volts and a slotted stainless steel faceplate.
2"
10"
12"
OPTIONS
DIM dimming driver0 - 10 volts
SIDE VIEW
BOTTOM VIEW
9"
9"
SS Stainless steelrequires periodicmaintenance toremove dirt and contaiminants, similar to householdstainless steel.
15L
7L
40 x 0.28 watts1580 lumens1
20 x 0.30 watts825 lumens1
1 Source lumens
Gasketed Faceplate - Stainless Steel with Enclosure Trim
Housing .064" Aluminum Protected with White Polyester Powder Coat
Thermal Heat Sink Panel
LED Module
Tempered and Sealed Prismatic Glass Lens
(4) #10 - 24 Flat HD Cap Screws - Stainless
LED Driver - Constant Current, IP66
Junction Box - Suitable for 4 No. 12 AWG Through Branch Circuit Conductors Suitable for 90°C. (3) - 1/2 NPT Plugs, Neoprene Rubber Gaskets, Bottom Mount Standard (Back mount is field adjustable)
1
2
3
4
5
6
7
8
Sightlines 1573SSLED Detailed Product Description
1
2
3
4
5
6
7
8
Concrete Pour & HollowWall Applications
www.rebellelighting.com© 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.
Sightlines 1635LED Mini Step/Path Low Level Area Light
MODEL LED VOLT COLOR
1635 120*
208
240
277
COLOR TEMPERATURE
40*
30
4000K
3000K
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsFaceplate: Cast aluminum. Housing: .064" aluminum protected with high gloss white polyester powder coat. Reflector: High gloss white, formed aluminum. Lens: Open - Tempered, sealed prismatic glass. Louvered - Prismatic polycarbonate. Junction box: Gasketted, die cast aluminum, rear mounted, suitable for through branch circuit conductors, suitable for 90°C. (3) - 1/2 NPT plugs, neoprene rubber gaskets.
LED driver: Constant current, 350mA. LED boards >82 CRI.
The Sightlines 1635LED series is designed for concrete pour installations and hollow wall construction in compact fluorescent versions. Units are non IC rated so the insulation, if any, must be kept 3" away from the housing and the housing should have 1/2" clearance all around except at the mounting points/surface. See Installation Instructions on the Rebelle website for further details. Conduits must be sealed against water entry into the fixture housing as outlined in the National Electric Code.
The Sightlines 1635LED units are offered with louvered or open faceplates. A white polyester powder coated reflector directs light output. Reflector is sealed behind faceplate assembly so that water and other contaminants are excluded.
The Sightlines 1635LED series is listed for use in wet locations within four feet of the ground to CSA and UL standards. Conduit must be sealed to exclude water from entering the housing.
www.rebellelighting.com 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.C
EXTERIOR
*Standard configuration unless otherwise specified
SAMPLE CATALOG NUMBER: 1635 - 7L - 40 - 120 - LV - RJB - WTUsing this catalog number would order 1 model 1635 low level area light with 20 x 0.21 watt LEDs with a color temperature of 4000K wired to 120 volts with a standard rear mount junction box and a louvered faceplate painted with white texture polyester powder coat.
3.3"
7.9"
SIDE VIEW
BOTTOM VIEW
FACEPLATE
LV*
PR
louvered
open
J-BOX LOCATION
RJB*
BJB
rear mount j-box
bottom mount j-box
3.5"
5.5"
8.75"
4.25"
4.25"
7L 20 x 0.21 watts600 lumens1
1 Source lumens
OPTIONS
DIM dimming(0-10V)
Junction Box - Suitable for 4 No. 12 AWG Through Branch Circuit Conductors Suitable for 90°C. (3) -1/2 NPT Plugs, Neoprene Rubber Gaskets, Rear Mount Standard
Recessed Housing - .064" Aluminum Protected with White Polyester Powder Coat
Cast Aluminum Face Plate - Gasketed
Lens - Prismatic Polycarbonate Standard or Prismatic Tempered Glass “PR” Option
LED Module
LED Driver - Constant Current
(2) Stainless Steel, Cap Screw - Captive
1
2
3
4
5
6
7
Sightlines 1635LED Detailed Product Description
1
2
3
4
5
6
7
Concrete Pour & Hollow Wall Applications
www.rebellelighting.com 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.C
Sightlines 1635SSLED Mini Step/Path Low Level Area Light
MODEL LED VOLT COLOR
1635SS 120*
208
240
277
COLOR TEMPERATURE
40*
30
4000K
3000K
SS Stainless steel requiresperiodic maintenance toremove dirt and contaminants, similarto householdstainless items.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsFaceplate: Stainless steel, #4 brushed finish. Housing: .064" aluminum protected with high gloss white polyester powder coat. Reflector: High gloss white, formed aluminum. Lens: Open - Tempered, sealed prismatic glass. Louvered - Prismatic polycarbonate. Junction box: Gasketted, die cast aluminum, rear mounted, suitable for through branch circuit conductors, suitable for 90°C. (3) - 1/2 NPT plugs, neoprene rubber gaskets.
LED driver. Constant current, 350mA. LED boards >82 CRI.
The Sightlines 1635SSLED series is designed for concrete pour installations and hollow wall construction in compact fluorescent versions. Units are non IC rated so the insulation, if any, must be kept 3" away from the housing and the housing should have 1/2" clearance all around except at the mounting points/surface. See Installation Instructions on the Rebelle website for further details. Conduits must be sealed against water entry into the fixture housing as outlined in the National Electric Code.
The Sightlines 1635SSLED units are offered with slotted or open faceplates. A white polyester powder coated reflector directs light output. Reflector is sealed behind faceplate assembly so that water and other contaminants are excluded.
The Sightlines 1635SSLED seriesis listed for use in wet locations within four feet of the ground to CSA and UL standards. Conduit must be sealed to exclude water from entering the housing.
www.rebellelighting.com 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.C
EXTERIOR
*Standard configuration unless otherwise specified
SAMPLE CATALOG NUMBER: 1635SS - 7L - 40 - 120 - LV - RJB Using this catalog number would order 1 model 1635SS low level area light with 20 x 0.21 watt LEDs with a color temperature of 4000K wired to 120 volts with a standard rear mount junction box and a slotted stainless steel faceplate.
3.3"
7.9"
SIDE VIEW
BOTTOM VIEW
FACEPLATE
LV*
PR
slotted
open
J-BOX LOCATION
RJB*
BJB
rear mount j-box
bottom mount j-box
3.5"
5.5"
8.75"
4.25"
4.25"
7L 20 x 0.21 watts600 lumens1
1 Source lumens
DIM dimming(0-10V)
OPTIONS
Junction Box - Suitable for 4 No. 12 AWG Through Branch Circuit Conductors Suitalbe for 90°C. (3) -1/2 NPT Plugs, Neoprene Rubber Gaskets, Back Mount StandardRecessed Housing - .064" Aluminum Protected with White Polyester Powder CoatStainless Steel Face Plate - Gasketed with Enclosure TrimLens - Prismatic Polycarbonate Standard or Prismatic Tempered Glass “PR” Option
(2) Stainless Steel, Cap Screw - CaptiveLED ModuleLED Driver - Constant Current
1
2
3
4
567
Sightlines 1635SSLED Detailed Product Description
1
2
3
4
5
6
7
Concrete Pour & Hollow Wall Applications
www.rebellelighting.com© 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.
Sightlines 1645LED Midi Step/Path Low Level Area Light
MODEL LED VOLT COLOR
1645 120*
208
240
277
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsFaceplate: Cast aluminum. Housing: .064" aluminum protected with high gloss white polyester powder coat. Reflector: High gloss white, formed aluminum. Lens: Prismatic polycarbonate. Junction box: Gasketted, die cast aluminum, bottom mounted (field adjustable to rear mount) suitable for through branch circuit conductors, suitable for 90°C. (3) - 1/2 NPT plugs, neoprene rubber gaskets.
LED driver: constant current, 460mA (15L) or 500mA (7L). LED boards > 82 CRI.
The Sightlines 1645LED series is designed for concrete pour installations and hollow wall construction. Units are non IC rated so the insulation, if any, must be kept 3" away from the housing and the housing should have 1/2" clearance all around except at the mounting points/surface. See Installation Instructions on the Rebelle website for further details. Conduits must be sealed against water entry into the fixture housing as outlined in the National Electric Code.
The Sightlines 1645LED are designed to be mounted within 1' to 2' of the ground or floor level. The faceplate is provided in a louvered style to eliminate glare and provide illumination on paths, aisles and stairs. An open face with a prismatic glass lens is available for areas that require higher intensity levels. LED output is maximized with a reflector system. The reflector system is sealed against the ingress of water and other contaminants.
The Sightlines 1645LED series is listed for use in wet locations within four feet of the ground to CSA and UL standards. Conduit must be sealed to exclude water from entering the housing.
www.rebellelighting.com 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.C
EXTERIOR
*Standard configuration unless otherwise specified
SAMPLE CATALOG NUMBER: 1645 - 15L - 40 - 120 - LV - WTUsing this catalog number would order 1 model 1645 low level area light with 40 x 0.28 watt LEDs with a color temperature of 4000K wired to 120 volts and a louvered faceplate painted with white texture polyester powder coat.
10.38"
OPTIONS
FS
DIM
EM
fuse kit
dimming driver(0-10 volt)
emergency battery
SIDE VIEW
BOTTOM VIEW
FACEPLATE
LV*
PR
louvered
open
COLOR TEMPERATURE
40*
30
4000K
3000K
5.25"
2"
4.0"
6"
6"
11"
15L
7L
40 x 0.28 watts1580 lumens1
20 x 0.30 watts825 lumens1
1 Source lumens
Housing .064" Aluminum Protected with White Polyester Powder CoatReflector - High Gloss White - .036" ThickLED ModuleCast Aluminum, Gasketed Face PlateSealed Prismatic Polycarbonate Lens - .125" Thick or Prismatic Tempered Glass Lens “PR” Option
LED Driver - Constant Current IP66 Junction Box - Suitable for 4 No. 12 AWG Through Branch Circuit Conductors Suitable for 90°C. (3) -1/2 NPT Plugs, Neoprene Rubber Gaskets, Bottom Mount Standard (Field adjustable to rear mount)(4) Stainless Steel, Cap Screws - Captive
1
234
5
67
8
Sightlines 1645LED Detailed Product Description
1
2
3
4
5
6
7
8
Concrete Pour & Hollow WallApplications
www.rebellelighting.com© 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.
Sightlines 1645SSLED Midi Step/Path Low Level Area Light
MODEL LED VOLT COLOR
1645SS 120*
208
240
277
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsFaceplate: Stainless steel, #4 brushed finish. Housing: .064" aluminum protected with high gloss white polyester powder coat. Reflector: High gloss white, formed aluminum. Lens: Prismatic polycarbonate. Junction box: Gasketted, die cast aluminum, bottom mounted (field adjustable to rear mount) suitable for through branch circuit conductors, suitable for 90°C. (3) - 1/2 NPT plugs, neoprene rubber gaskets.
LED driver: Constant current, 460mA (15L) or 500mA (7L) LEDs boards >82 CRI.
The Sightlines 1645SSLED series is designed for concrete pour installations and hollow wall construction. Units are non IC rated so the insulation, if any, must be kept 3" away from the housing and the housing should have 1/2" clearance all around except at the mounting points/surface. See Installation Instructions on the Rebelle website for further details. Conduits must be sealed against water entry into the fixture housing as outlined in the National Electric Code.
The Sightlines 1645SSLED are designed to be mounted within 1' to 2' of the ground or floor level. The faceplate is provided in a slotted style to eliminate glare and provide illumination on paths, aisles and stairs. An open face with a prismatic glass lens is available for areas that require higher intensity levels. The reflector system is sealed against the ingress of water and other contaminants.
The Sightlines 1645SSLED seriesis listed for use in wet locations within four feet of the ground to CSA and UL standards.Conduit must be sealed to exclude water from entering the housing.
www.rebellelighting.com 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice. C
EXTERIOR
*Standard configuration unless otherwise specified
SAMPLE CATALOG NUMBER: 1645SS - 15L - 40 - 120 - LVUsing this catalog number would order 1 model 1645SS low level area light with 40 x 0.28 watt LEDs with a color temperature of 4000K wired to 120 volts and a slotted stainless steel faceplate.
10.38"
OPTIONS
FS
DIM
fuse kit
dimming driver(0-10 volt)
SIDE VIEW
BOTTOM VIEW
FACEPLATE
LV*
PR
slotted
open
COLOR TEMPERATURE
40*
30
4000K
3000K
5.25"
2"
4.0"
6"
6"
11"
SS Stainless steel requiresperiodic maintenance toremove dirt and contaminants, similarto householdstainless items.
15L
7L
40 x 0.28 watts1580 lumens1
20 x 0.30 watts825 lumens1
1 Source lumens
Housing .064" Aluminum Protected with White Polyester Powder Coat
Reflector - High Gloss White - .036" Thick
LED Module
Stainless Steel, Gasketed Face Plate with Enclosure Trim
Sealed Prismatic Polycarbonate Lens - .125" Thick or Prismatic Tempered Glass Lens “PR” Option
LED Driver - Constant current IP66
Junction Box - Suitable for 4 No. 12 AWG Through Branch Circuit Conductors Suitable for 90°C. (3) -1/2 NPT Plugs, Neoprene Rubber Gaskets, Bottom Mount Standard (Field adjustable to rear mount)
(4) Stainless Steel, Cap Screws - Captive
1
2
3
4
5
6
7
8
Sightlines 1645SSLED Detailed Product Description
Concrete Pour & Hollow WallApplications
www.rebellelighting.com© 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.
1
2
3
4
5
6
7
8
Sightlines 1645VLED Midi Step/Path Low Level Area Light
MODEL LED VOLT COLOUR
1645V 120*
208
240
277
COLOR TEMPERATURE
40*
30
4000K
3000K
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsFaceplate: Cast aluminum. Housing: .064" aluminum protected with high gloss white polyester powder coat. Reflector: High gloss white, formed aluminum. Lens: Tempered, sealed prismatic glass or prismatic polycarbonate. Suitable for through branch circuit conductors suitable for 90°C. (2) - 1/2 NPT plugs neoprene rubber gaskets.
Driver: Constant current, 460 mA (15L) or 500mA (7L). LED boards >82 CRI.
The Sightlines 1645VLED series is designed for concrete pour installations or hollow wall construction. Units are non IC rated so the insulation, if any, must be kept 3" away from the housing and the housing should have 1/2" clearance all around except at the mounting points/surface. See Installation Instructions on the Rebelle website for further details. Conduits must be sealed against water entry into the fixture housing as outlined in the National Electric Code.
The Sightlines 1645VLED features a vertical orientation louvered or open faceplate. Reflector is high gloss white polyester powder coat. The reflector system is sealed against the ingress of water and other contaminants.
The Sightlines 1645VLED series is listed for use in wet locations within four feet of the ground to CSA and UL standards. Conduit must be sealed to exclude water from entering the housing.
www.rebellelighting.com© 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.
EXTERIOR
*Standard configuration unless otherwise specified
SAMPLE CATALOG NUMBER: 1645V - 15L - 40 - 120 - LV - WTUsing this catalog number would order 1 model 1645V low level area light with 40 X 0.28 watt LEDs with a color temperature of 4000K wired to 120 volts with a louvered faceplate painted with white texture polyester powder coat.
11"
11"
SIDE VIEW
BOTTOM VIEW
FACEPLATE
LV*
PR
louvered
open
10.4"
3.8"
5.2"
6"
15L
7L
40 x 0.28 watts1580 lumens1
20 x 0.30 watts825 lumens1
1 Source lumens
FS
DIM
fuse kit
dimming driver(0-10 volt)
OPTIONS
Housing .064" Aluminum Protected with White Polyester Powder Coat
Reflector - High Gloss White - .036" Thick
LED Light Engine
Cast Aluminum, Gasketed Face Plate
Sealed Prismatic Polycarbonate Lens - .125" Thickor Prismatic Tempered Glass Lens “PR” Option
Driver - Constant Current IP66
(4) Stainless Steel, Cap Screws - Captive
1
2
3
4
5
6
7
Sightlines 1645VLED Detailed Product Description
1
2
3
4
5
6
7
Concrete Pour & Hollow Wall Applications
www.rebellelighting.com© 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.
Sightlines 2400LED Mini Step/Path Low Level Area Light
MODEL LED VOLT COLOR
2400 120*
208
240
277
COLOR TEMPERATURE
40*
30
4000K
3000K
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsFaceplate: Cast aluminum. Housing: .064" aluminum protected with high gloss white polyester powder coat. Reflector: High gloss white, formed aluminum. Lens: Open - Tempered, sealed prismatic glass. Louvered face: Prismatic polycarbonate. Suitable for through branch circuit conductors, suitable for 90°C. (2) - 1/2 NPT plugs, neoprene rubber gaskets.
LED driver: Constant current, 350mA. LED boards >82 CRI.
The Sightlines 2400LED series is designed for concrete pour installations and hollow wall construction. Units are non IC rated so the insulation, if any, must be kept 3" away from the housing and the housing should have 1/2" clearance all around except at the mounting points/surface. See Installation Instructions on the Rebelle website for further details. Conduits must be sealed against water entry into the fixture housing as outlined in the National Electric Code.
The Sightlines 2400LED units are offered with slotted or open faceplates. A white polyester powder coated reflector directs light output. Reflector is sealed behind faceplate assembly so that water and other contaminants are excluded.
The Sightlines 2400LED series is listed for use in wet locations within four feet of the ground to CSA and UL standards. Conduit must be sealed to exclude water from entering the housing.
www.rebellelighting.com 2016 REBELLE All rights reserved. R16 Specifications subject to changed without notice.C
EXTERIOR
*Standard configuration unless otherwise specified
SAMPLE CATALOG NUMBER: 2400 - 7L - 40 - 120 - LV - WTUsing this catalog number would order 1 model 2400 low level area light with 20 x 0.21 watt LEDs with a color temperature of 4000K wired to 120 volts and a slotted faceplate painted with white texture polyester powder coat.
3.6"
2.8"
SIDE VIEW
BOTTOM VIEW
FACEPLATE
LV*
PR
slotted
open
1"
10.5"
3"
3"
11"
7L 20 x 0.21 watts600 lumens1
1 Source lumens
OPTIONS
DIM dimming driver(0-10 volt)
Housing .064" Aluminum Protected with White Polyester Powder CoatReflector - High Gloss White - .036" ThickLED ModuleCast Aluminum, Gasketted Face Plate(2) Stainless Steel, Cap Screws - Captive
Sealed Prismatic Polycarbonate Lens - .125" Thick or Prismatic Tempered Glass Lens “PR” Option1/2 NPT Plugs (2) - Suitable for 4 No. 12 AWG ThroughBranch Circuit Conductors Suitable for 90°C.LED Driver - Constant Current
1
2345
6
7
8
Sightlines 2400LED Detailed Product Description
1
2
3
4
5
6
7
8
Concrete Pour & Hollow Wall Applications
www.rebellelighting.com 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.C
Sightlines 2400SSLED Mini Step/Path Low Level Area Light
MODEL LED VOLT COLOR
2400SS 120*
277
COLOR TEMPERATURE
40*
30
4000K
3000K
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsFaceplate: Stainless steel, #4 brushed finish. Housing: .064" aluminum protected with high gloss white polyester powder coat. Reflector: High gloss white, formed aluminum. Lens: Open - Tempered, sealed prismatic glass. Louvered face: Prismatic polycarbonate. Suitable for through branch circuit conductors, suitable for 90°C. (2) - 1/2 NPT plugs, neoprene rubber gaskets.
LED driver: Constant current 350mA.LED boards > 82 CRI.
The Sightlines 2400SSLED series is designed for concrete pour installations and hollow wall construction. Units are non IC rated so the insulation, if any, must be kept 3" away from the housing and the housing should have 1/2" clearance all around except at the mounting points/surface. See Installation Instructions on the Rebelle website for further details. Conduits must be sealed against water entry into the fixture housing as outlined in the National Electric Code.
The Sightlines 2400SSLED units are offered with slotted or open faceplates. A white polyester powder coated reflector directs light output. Reflector is sealed behind faceplate assembly so that water and other contaminants are excluded.
The Sightlines 2400SSLED series is listed for use in wet locations within four feet of the ground to CSA and UL standards. Conduit must be sealed to exclude water from entering the housing.
www.rebellelighting.com 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.C
EXTERIOR
*Standard configuration unless otherwise specified
SAMPLE CATALOG NUMBER: 2400 - 7L - 40 - 120 - LVUsing this catalog number would order 1 model 2400SS low level area light with a slotted face and a 7.2 watt LED at 4000K wired to 120 volts and a stainless steel faceplate.
3.6"
2.8"
SIDE VIEW
BOTTOM VIEW
FACEPLATE
LV*
PR
slotted
open
1"
10.5"
3"
3"
11"
SS Stainless steel requiresperiodic maintenance toremove dirt and contaminants, similarto householdstainless items.
7L 20 x 0.21 watts600 lumens1
1 Source lumens
OPTIONS
DIM dimming driver(0-10 volt)
Housing .064" Aluminum Protected with White Polyester Powder CoatReflector - High Gloss White - .036" ThickLED ModuleStainless Steel, Gasketed Face Plate with Enclosure Trim1/2 NPT Plugs (2) - Suitable for 4 No. 12 AWG ThroughBranch Circuit Conductors Suitable for 90°C.
(2) Stainless Steel. Cap Screws - Captive
Sealed Prismatic Polycarbonate Lens - .125" Thick or Tempered Prismatic Glass Lens “PR” Option
LED Driver - Constant current
1
234
5
6
7
8
Sightlines 2400SSLED Detailed Product Description
1
2
3
4
6
7
5
8
Concrete Pour & Hollow Wall Applications
www.rebellelighting.com 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.C
Sightlines Sentry 2868LED Maxi Bollard
MODEL LED VOLT COLOR
2868 32L 120*
208
240
277
347+
COLOR TEMPERATURE
40
35
30
4000K
3500K
3000K
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsCast aluminum (.188" wall) marine grade top cap, reflector, heat sink and base plate. Shaft and housing: .250" thick cold rolled steel seamless tube. Anchorage: Galvanized (hot dipped) steel.
LED ComponentsDriver: Electronic, constant current, 120-277 Volt. LEDs: 4 x Luxeon M Emitters, 70 CRI standard.
The 2868LED maxi bollard is designed to attach to a poured concrete foundation (by others) using anchor bolts, template and hardware provided. Standard mounting locks shaft to a cast aluminum base plate. Vandal resisting mount is provided by an optional internally fastened tenon assembly (BM Option).
A sealed optical compartment provides high optical efficiency, excellent transparency and protects the LED modules. Side shield provides asymmetric distribution by reducing the number of LEDs.
The 2868LED sightlines bollard is listed for use in wet locations to UL and CSA Standards.
LED life 50,000 hours minimum at 70% lumen maintenance.
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
EXTERIOR
OPTIONS
HO
BM
180°
PT
80
90
head only (20" O.A.)
barricade mounting tenon
asymmetric distribution with house side shield 16 watts, half output
polished aluminum topcap
80 CRI
90 CRI
HEIGHT
42" *
36"
30"
*Standard configuration unless otherwise specified +Consult factory 1Source Lumens (4000K, 70CRI)
SAMPLE CATALOG NUMBER: 2868LED - 32L - 40 - 120 - 42 - BTUsing this catalog number would order 1 model 2868LED maxi illuminated bollard with 32 watt LED light engine with a color temperature of 4000K wired to 120 volts with a 42" height, painted with black texture polyester powder coat. Anchor bolt set is provided.
Ø8"
42"or 36"30"
20"HEADONLY
VERSION 'HO'
HEAVY .250" THICK COLD ROLLED STEEL SHAFT AND CAST ALUMINUM CONSTRUCTION
32 watts 4300 lumens1
5/16 - 18 S/S Cap HD Screw with Seal Washer
Top Casting - Aluminum
Heat Sink
Luxeon M Emitter (x 4, 1 per quadrant)
Cast Aluminum Reflector1
2
3
4
5
6
7
8
Sightlines Sentry™ 2868LED Detailed Product Description
MOUNTING DETAILS
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
1
2
3
4
5
6
7
Driver (Dimming)
Ø8" .250" Thick Steel Shaft
Cast Aluminum Base Plate with (4) Ø1/2 Anchor Bolts
Barricade Mount - 'BM'
Bollard/Tenon Hardware
*Barricade Tenon, 10" H, Corrosion Resistant
(4) Corrosion Resistant Anchor Bolts - 12" Long
*Standard LED fixture weight 75 lbs*Anchor bolt template provided
Cast Base with Aligning Plate(4) Corrosion Resistant AnchorBolts - 12" Long
(4) Stainless Steel Set Screws
8
Sightlines Sentry 2868U Unlit Bollard
MODEL COLOR
2868U WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTIONS
MaterialsCast aluminum (.188" wall) marine grade top cap. Shaft: .250" thick cold rolled steel seamless tube. Anchorage: See page 2 for details.
The 2868U unlit bollard is designed to attach to a poured concrete foundation (by others) using anchor bolts, template and hardware provided. Standard mounting locks shaft to a cast aluminum base plate.
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
EXTERIOR
OPTIONS
BM
PT
REM
barricade mounting tenon
polished aluminum topcap
removable construction
HEIGHT
42" *
36"
30"
*Standard configuration unless otherwise specified
SAMPLE CATALOG NUMBER: 2868U - 42” - BTUsing this catalog number would order 1 model 2868U unlit bollard with a 42" height, painted with black texture polyester powder coat. Anchor bolt set is provided.
Ø8"
42"or 36"30"
HEAVY .250" THICK COLD ROLLED STEEL SHAFT AND CAST ALUMINUM CONSTRUCTION
Vandal resisting mount is provided by an optional internally fastened tenon assembly (BM). Optional removable construction is also available, when the bollard is removed the inground mounting hardware is flush with grade (REM).
5/16 - 18 S/S Cap HD Screw with Seal Washer
Top Casting - Aluminum
Ø8" .250" Thick Steel Shaft
Cast Aluminum Base Plate with (4) Ø1/2 Anchor Bolts
1
2
3
4
Sightlines Sentry™ 2868U Detailed Product Description
MOUNTING DETAILS
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
1
2
3
4
*Anchor bolt template provided
Cast Base with Aligning Plate(4) Corrosion Resistant AnchorBolts - 12" Long
(4) Stainless Steel Set Screws
Barricade Mount - 'BM'
Bollard/Tenon Hardware
*Barricade Tenon, 10" H, Corrosion Resistant
(4) Corrosion Resistant Anchor Bolts - 12" Long
Removable Version - 'REM'Installation Example
Grade
Standard Mounting Removable ConstructionFlush with grade when bollard removed.
Grade
Drain Rock
New Concrete8” Dia.
14” Min.
10.25”18”
Aligner Pin Removable
Cast AluminumBase PlateHex Head Bolts - Removable
Tenon AssemblyIn-GroundHousing Assembly withDrain Hole
Sightlines 8000LED Vandal Resistant Recessed Downlight
MODEL LED MODULE COLOR TEMPERATURE VOLT LENS TRIM COLOUR
8000 120*
208
240
277
32L
22L
16L
32 watts
22 watts
16 watts
CPC*
CTG
PR
.188" clear polycarbonate
.156" clear tempered glass
solite prismatic .156"tempered glass
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsHousing: Wiped, galvanized steel sheet. Trim: Pressure die cast aluminum. Reflector: Spun aluminum with diffuse ALZAK finish. Junction Box: Zinc plated steel. Lens: Clear polycarbonate, clear glass or prismatic (Solite) glass. Heat sink: cast aluminum. Fasteners: Hex drive, standard.
Electrical ComponentsDriver: Electronic, constant current, integral, 120-277V. LED Module: COB 1208 or 1205, includes control leads for 0 - 10V dimming, 70 CRI standard.
The 8000 series is for hollow ceilings, T-bar drywall or plaster. Units are provided with adjustable mounting hangers and are for non-insulated ceilings (non-IC). Insulation materials, if present, must be kept 3" away from housing. Junction box is suitable for thru-wiring with 4 no. 12 AWG through branch circuit conductors, suitable for 90°C (4IN / 4OUT). Fixture weight 15lbs.
The 8000 series reflectors are precision formed from high purity aluminum. Finish is diffuse ALZAK as provided by Alux - Luxar.
The 8000 series is listed for use in wet locations to UL and CSA Standards.
Trims are double gasketed to exclude contaminants from the reflector cavity to ensure longevity of optical performance.
The standard tamper resistant or optional tamper proof stainless steel fasteners secure trim to housing. Impact resistant polycarbonate or tempered glass lenses are provided and a cast guard is an optional extra.
LED life 50,000 hours, L70 @ 25°C ambient.
www.rebellelighting.com© 2020 REBELLE All rights reserved. R20 Specifications subject to change without notice.
EXTERIOR
OPTIONS
CG
BH
PH
TP
80
90
EM+
cast guard
bar hanger, set of 4# 1287
paintedhousing
tamper proofhex drive - center pinfasteners
80 CRI
90 CRI
emergencybattery
40K*
30K
35K
4000K LED module
3000K LED module
3500K LED module
*Standard configuration unless otherwise specified
SAMPLE CATALOG NUMBER: 8000 - HC - 32L - 40K - 120 - CPC - WTUsing this catalog number would order 1 model 8000 recessed exterior luminaire for a hollow ceiling application with a COB LED light engine in 4000K and 70 CRI wired to 120 volts with a .188" clear polycarbonate lens and white texture paint on the trim.
'PR' TRIM
'CTG' OR ‘CPC’ TRIM
'CG' CAST GUARD (OPTIONAL)
MOUNTING
HC* hollow ceilingnon I.C.
7.4”
9.75” Dia.
11”
14.5”1.8”
1
1
1
1Source nominal power +Remote mounted test switch
Housing - .036" (20ga) Wiped Galvanized Steel
Heat Sink - Cast Aluminum
LED Module Luxeon COB
Reflector - Spun Aluminum with Diffuse ALZAK Finish - Gasketed
Driver 120-277 Volts
Adjustable Mounting Brackets - .048 Zinc Plated Steel (Mounting Bars Optional) Hollow Wall Only
Pressure Die Cast Aluminum Trim - Double Gasket With Three Point Lock Up, Stainless Steel Fasteners - Vandal Resistant Hex Drive
Lens - .156" Solite or .156" Thick Clear Tempered Glass, Standard Lens is .188" Clear UV Stabilized Polycarbonate
1.75" max. ceiling thickness Junction Box - Suitable for 4 No. 12 AWG Through Branch Circuit
Conductors Suitable for 90°C.
www.rebellelighting.com© 2020 REBELLE All rights reserved. R20 Specifications subject to change without notice.
Sightlines 8000LED Detailed Product Description
*Lumen Multiplier for CRI 80 use 0.91, CRI 90 use 0.78
Product CCT CRI* Source Lumens Delivered Lumens LED Power (W) System Power (W) Lumens/Watt8000-32L 3000/3500 70 4608 3456 31.65 37.68 928000-32L 4000 70 4921 3691 31.68 37.71 988000-22L 3000/3500 70 3180 2385 21.93 26.10 918000-22L 4000 70 3389 2542 21.94 26.12 978000-16L 3000/3500 70 2492 1869 15.61 18.58 1018000-16L 4000 70 2638 1978 15.56 18.52 107
rebellelighting.com© 2014 REBELLE All rights reserved.
Poles 3015 Steel Straight 4" Diameter .120" Wall EXTERIOR
MATERIAL
PROTECTION
MODEL HEIGHT WEIGHT COLOR
8 standard powder paints,RAL and custom available
High strength electric welded steel tubing welded to the top and bottom of a steel base plate. Maintenance opening is provided with ground lug and cover.
Hot etch chemical bath with polyester powder coat with UV and salt spray resistance.
8101214161820
56708090
100110120
80 90 100EPA RATING
24.019.115.012.2
9.67.66.0
19.215.011.89.47.45.74.4
15.112.2
9.57.65.94.53.4
ANCHOR BOLTS
3/4 - 17
OPTIONS
DR
GFI
TP
LS
PCB
PCQ
BCR
BCS
BCH
GLV
duplex receptacleweather tightground fault interrupting duplex receptacletamper proof hand hole screwsprovision for loud speaker outletbutton type photocell(specify voltage)quarter turn photocell(specify voltage)two piece round base cover - steeltwo piece square base cover - steelhinged base design consult factorygalvanized under paint
3015
OPTIONAL ROUND BASE COVER
BCD 8"12"
18"
14'
16'
18'
20'
10'
8'
4"
2" x 4" Handhole
12'
OPTIONAL SQUARE BASE COVER
3015
rebellelighting.com© 2014 REBELLE All rights reserved.
Poles 3018 Steel Straight 5" Diameter .120" Wall EXTERIOR
MATERIAL
PROTECTION
MODEL HEIGHT WEIGHT COLOR
8 standard powder paints,RAL and custom available
High strength electric welded steel tubing welded to the top and bottom of a steel base plate. Maintenance opening is provided with ground lug and cover.
Hot etch chemical bath with polyester powder coat with UV and salt spray resistance.
1416182022
105116130145160
80 90 100EPA RATING
N/AN/A
10.511.77.2
N/AN/A8.29.15.5
N/AN/A6.57.24.2
ANCHOR BOLTS
3/4 - 17
OPTIONS
DR
GFI
TP
LS
PCB
PCQ
BCR
BCS
BCH
GLV
duplex receptacleweather tightground fault interrupting duplex receptacletamper proof hand hole screwsprovision for loud speaker outletbutton type photocell(specify voltage)quarter turn photocell(specify voltage)two piece round base cover - steeltwo piece square base cover - steelhinged base design consult factorygalvanized under paint
3018
OPTIONAL ROUND BASE COVER
BCD 8"14"
18"
14'
16'
18'
20'
22'
4"
2" x 4" Handhole
OPTIONAL SQUARE BASE COVER
3018
rebellelighting.com© 2014 REBELLE All rights reserved.
Poles 3021 Steel Straight 4" Square .120" Wall EXTERIOR
MATERIAL
PROTECTION
MODEL HEIGHT WEIGHT COLOR
8 standard powder paints,RAL and custom available
High strength electric welded steel tubing welded to the top and bottom of a steel base plate. Maintenance opening is provided with ground lug and cover.
Hot etch chemical bath with polyester powder coat with UV and salt spray resistance.
8101214161820
657590
100115125140
80 90 100EPA RATING
N/A30.624.419.915.912.6
9.6
N/A23.818.815.111.89.26.7
N/A18.914.811.78.96.74.5
ANCHOR BOLTS
3/4 - 17
OPTIONS
DR
GFI
TP
LS
PCB
PCQ
BCS
BCH
GLV
duplex receptacleweather tightground fault interrupting duplex receptacletamper proof hand hole screwsprovision for loud speaker outletbutton type photocell(specify voltage)quarter turn photocell(specify voltage)two piece square base cover - steelhinged base design consult factorygalvanized under paint
3021
BCD 8.5"10.375"
18"
14'
12'
10'
8'
16'
18'
20'
3.5"
2" x 4" HandholeOPTIONAL SQUARE BASE COVER
3021
rebellelighting.com© 2014 REBELLE All rights reserved.
Poles 3024 Steel Straight 5" Square .120" Wall EXTERIOR
MATERIAL
PROTECTION
MODEL HEIGHT WEIGHT COLOR
8 standard powder paints,RAL and custom available
High strength electric welded steel tubing welded to the top and bottom of a steel base plate. Maintenance opening is provided with ground lug and cover.
Hot etch chemical bath with polyester powder coat with UV and salt spray resistance.
18202530
165185225265
80 90 100EPA RATING
N/A17.7
9.84.7
N/A12.7
6.32.0
N/A9.43.7N/A
ANCHOR BOLTS
3/4 - 17
OPTIONS
DR
GFI
TP
LS
PCB
PCQ
BCS
BCH
GLV
duplex receptacleweather tightground fault interrupting duplex receptacletamper proof hand hole screwsprovision for loud speaker outletbutton type photocell(specify voltage)quarter turn photocell(specify voltage)two piece square base cover - steelhinged base design consult factorygalvanized under paint
3024
BCD 11"12.5"
18"
18'
20'
25'
30'
4"
2" x 4" Handhole
3024
OPTIONAL SQUARE BASE COVER
rebellelighting.com© 2014 REBELLE All rights reserved.
Poles 3027 Steel Straight 3" Diameter .120" Wall EXTERIOR
MODEL HEIGHT WEIGHT COLOR
8 standard powder paints,RAL and custom available
810121416
4055607080
80 90 100EPA RATING
14.310.0
7.76.04.6
9.07.75.84.43.2
7.76.04.43.32.3
ANCHOR BOLTS
3/4 - 17
OPTIONS
DR
GFI
TP
BCR
GLV
duplex receptacleweather tightground fault interrupting duplex receptacletamper proof hand hole screwstwo piece round base cover - steelgalvanized under paint
3027
3027
OPTIONAL ROUND BASE COVER
BCD 8"12"
18"
16'
14'
10'
8'
3.5"
2" x 4" Handhole
12'
MATERIAL
PROTECTION
High strength electric welded steel tubing that is welded to the top and bottom of a steel base plate. Maintenance opening is provided with ground lug and cover.
Hot etch chemical bath with polyester powder coat with UV and salt spray resistance.
rebellelighting.com© 2017 REBELLE All rights reserved.
Poles 3030 Aluminum Bottleneck 4" x 8" Diameter .156" Wall EXTERIOR
MODEL HEIGHT WEIGHT COLOR
8 standard powder paints,RAL and custom available
80 90 100EPA RATING
17.117.114.211.99.67.7
ANCHOR BOLTS
3/4 - 173/4 - 173/4 - 173/4 - 171 - 361 - 36
3030
3030
12” BCD
16'
18'
20'
12'
10'
14'
MATERIAL
PROTECTION
Pole is a tapered seamless 6063 aluminum alloy spun shaft, provided with a clamshell type design collar and base cover.Shaft is welded to top and bottom of a cast base plate. Maintenance opening is provided with ground lug cover.
Hot etch chemical bath with polyester powder coat with UV and salt spray resistance.
36"
101214161820
444954596469
13.413.411.09.17.25.7
10.710.78.87.25.74.4
16.13" Dia.
12.05" Dia.
rebellelighting.com© 2016 REBELLE All rights reserved. R16 Specifications subject to change without notice.
Poles 3031 Bottleneck 4" x 6" Diameter .125" Wall EXTERIOR
MODEL HEIGHT WEIGHT COLOR
8 standard powder paints,RAL and custom available
81012141618
273134384245
80 90 100EPA RATING
16.912.4
9.67.45.64.1
12.89.67.25.53.92.7
10.37.65.74.22.91.9
ANCHOR BOLTS
3/4 - 17
OPTIONS
3031
3031
BCD9.5"
3.5" ABPROJECTION
10.32"
10.32"
18'
16'
12'
10'
8'
14'
MATERIAL
PROTECTION
4" diameter upper shaft aluminum alloy with 6" diameter lower section, 2 piece clam shell cast aluminum alloy transitioncollar and base cover. Maintenance opening is provided with provision for ground lug.
.
Hot etch chemical bath with polyester powder coat with UV and salt spray resistance.
16"
18"
36"
DR
GFI
TP
duplex receptacleweather tightground fault interrupting duplex receptacletamper proof hand hole screws
Tessera 3100LED Wall MountMODEL VOLTCOLOR TEMPERATURELED MODULE DISTRIBUTION COLOR
3100 12L 120*
208
240
277
SP
FL
WFL
VWFL
PB⁴
19° spot
30° flood
45° wide flood
94° very wide flood
pencil beam8 watts1
3000K or 4000K only
OPTIONS
90
SC
SC1
DIM³
NAT
WP( _”)
90 CRI
surface wiringconduit feed canopy
surface wiringcanopy
dimming (0-10V)
natatoriumconstruction
wall plate(specify 6, 8 or 10”)
40*
35
30
27
4000K
3500K
3000K
2700K
1 x 12 watts1219 lumens
1 x 9 watts930 lumens2
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAll aluminum construction, stainless steel tamper resistant hardware, acrylic lens.
Electrical ComponentsConstant current driver 350mA or 250mA, -30°C starting temperature, Luxeon COB LED with Zhaga compliant socket, 80 CRI standard. Pencil beam uses a proprietary PCB with constant current driver 2080mA.Optional dimming driver compatible with IEC60929:2006 0-10V ballast controls.
The 3100LED series is designed for wall mounting. The design allows for mounting in the uplight or downlight position. The LED driver is integrally fixed to a mounting plate and designed to fit into a 4” octagon j-box (by others). The LED driver supplied with the fixture uses 4.5 cubic inches of J-Box volume, pencil beam driver uses 6.8 cubic inches of J-Box volume. A suitable J-Box example is 15 cubic inch capacity Iberville 54151 (not included). Optional surface wiring box suitable for 1/2” conduit feed. Optional wall plate available to cover mounting surface, 6, 8 or 10” square. Maximum fixture weight 4 lbs.
The 3100LED luminaire uses Chip-on-Board technology with Zhaga Book 3 compliant socket, field changeable high efficiency twist lock reflector and clear acrylic lens. Pencil beam distribution uses a fixed optic (FWHM 7° x 55°) mounted to a proprietary PCB.
The 3100LED series is listed for use in wet locations to UL and CSA Standards. Reported L70 (10k) >55,000 hours per TM-21. Calculated L70 >100,000 hours at 45°C ambient. IP65 rated.
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18 Specifications subject to change without notice.
INTERIOR/EXTERIOR
SAMPLE CATALOG NUMBER: 3100 - 12L - 40 - 120 - SP - WTUsing this catalog number would order 1 model 3100 wall mount luminaire using spot optics and a 12 watt LED module with a color temperature of 4000K wired to 120 volts, painted white texture polyester powder coat.
*Standard configuration unless otherwise specified
4"4.5"
4"
4"
1
2
9L 1
¹Nominal LED Power ²Delivered(4000K, 80CRI), not applicable to PB ³Not available with pencil beam optic 4Pencil beam LED module has a nominal LED power of 8 watts, replaces COB module watts. Not available in 347 volt.
Tessera 3100LED
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18 Specifications subject to change without notice.
*Based on system power+Not applicable with PB optic
335
670
1004
1339
1
2
WFL (45° Wide Flood Optic)*
Machined Aluminum Top Plate
Extruded Aluminum Housing 6063 T5 Aluminum Alloy, high corrosion resistance and low copper content (<0.1%)
Machined Aluminum Lens Frame with Clear Acrylic Lens
Luxeon COB LED with Zhaga Book 3 Compliant Socket
Driver (not shown) constant current, 350mA or 250mA. 120-277VOutput Over-Voltage, Output Over-Current and Output ShortCircuit Protection with Auto RecoveryPencil Beam - Constant Current Driver 2080mA
All stainless steel hardware
FL (30° Flood Optic)* SP (19° Spot Optic)*
Mounting Plate
Product CCT CRI Delivered Lumens Nominal LED Power System Power Lumens per Watt*
3100-12L
3100-9L
4000
4000
80
80
1219+
930+
12 watts
9 watts
13.63 watts
9.64 watts
89.4
96.5
Twist Lock Reflector
576
1151
1727
2303
1
2
993
1986
2979
3973
1
2
155
310
465
620
1
2
VWFL (94° Very Wide Flood Optic)*
Lumen Multipliers 3500K - 0.962 3000K - 0.944 2700K - 0.923 90 CRI - 0.842
*Based on 3100-12L
Tessera 3100LED Wall Mount Light
MODEL VOLT DISTRIBUTION COLOR
3100 120*
208
240
277
SP
FL
15° spot
30° flood
OPTIONS
SC
SC1
NAT
WP( _”)
CV
surface wiringconduit feedcanopy
surface wiring canopy
natatoriumconstruction
wall plate(specify 6, 8 or 10”)
cut off visor
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAll aluminum construction, stainless steel tamper resistant hardware, acrylic lens.
Electrical ComponentsConstant current driver 350mA or 250mA, -30°C starting temperature.
The 3100LED series is designed for wall mounting. The LED driver is integrally fixed to a mounting plate and designed to fit into a 4” octagon j-box (by others). The LED driver supplied with the fixture uses 4.5 cubic inches of J-Box volume. A suitable J-Box example is 15 cubic inch capacity Iberville 54151 (not included). Optional surface wiring conduit feed canopy suitable for 1/2” conduit feed. Optional wall plate available to cover mounting surface, 6, 8 or 10” square. Maximum fixture weight 4 lbs.
The 3100LED luminaire uses a precision molded lens to direct the light, either spot or flood distributions are available.
The 3100LED series is listed for use in wet locations to UL and CSA Standards. L70 (minimum) >50,000 hours. IP65 rated.
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18 Specifications subject to change without notice.
INTERIOR/EXTERIOR
SAMPLE CATALOG NUMBER: 3100 - 10L - AM - 120 - SP - WTUsing this catalog number would order 1 model 3100 wall mount luminaire using a spot optic and a 10 watt amber LED module wired to 120 volts, painted white texture polyester powder coat.
*Standard configuration unless otherwise specified
4"4.5"
4"
4"
¹Nominal LED Power ²Source lumens
LED MODULE
10L
7L
10 watts1 887 lumens2
7 watts1 633 lumens2
COLOR TEMPERATURE
AM amber LEDturtle friendly585-595nm
Wildlife Lighting Certification Number 2018-040
Turtle Friendly
Tessera 3100LED Turtle Friendly Wall Mount
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18 Specifications subject to change without notice.
Machined Aluminum Top Plate
Extruded Aluminum Housing 6063 T5 Aluminum Alloy, high corrosion resistance and low copper content (<0.1%)
Machined Aluminum Lens Frame with Clear Acrylic Lens
SinkPAD-II PCB Technology with Amber LEDs
Driver (not shown) constant current, 350mA or 250mA. 120-277V Output Over-Voltage, Output Over-Current and Output Short Circuit Protection with Auto Recovery
All stainless steel hardware
FL (30° Flood Optic) SP (15° Spot Optic)
Mounting Plate
576
1151
1727
2303
1
2
993
1986
2979
3973
1
2
Precision Moulded Lens with Flood or Spot Optics
7"
3"33.6°
‘CV’ Cut-Off Visor Option
Tessera Surface Canopy Option (For Use with 3100, 3101, 3103, 3121)
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Surface Wiring Conduit Feed Canopy (-SC)Extruded Aluminum, Painted to MatchSuitable for 1/2” Conduit Feed (No J-Box Required)2 Locations, Opposing SidesDriver HousingSuitable for Ceiling and Wall Mount Installations
Surface Wiring Canopy (-SC1)Extruded Aluminum, Painted to MatchDriver Housing, for mounting installationswith no J-Box or incorrect size J-BoxSuitable for Ceiling and Wall Mount Installations
4”3.3”
Ø.188”(4)
Ø.219”(4)
3.5”
4”
Wall Surface Mounting Plate Detail
6.0”
4.5” 1.5”
4.0”
Only provided withconduit feed surface canopy (-SC)
Surface Canopy
Tessera 3101LED Wall Mount Lighting
MODEL VOLTCOLOR TEMPERATURELED MODULE DISTRIBUTION COLOR
3101 12L 120*
208
240
277
T3* type III optic40*
30
4000K
3000K
1 x 12 watts1585 lumens WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAll aluminum construction, stainless steel tamper resistant hardware, PMMA lens.
Electrical ComponentsConstant current driver 250mA, 80CRI standard.
The 3101LED series is designed for wall mounting. The LED driver is integrally fixed to a mounting plate and designed to fit into a 4” octagon j-box (by others). The LED driver supplied with the fixture uses 4.5 cubic inches of J-Box volume. A suitable J-Box example is 15 cubic inch capacity Iberville 54151 (not included). Optional surface wiring box for 1/2” conduit feed. Optional wall plate available to cover mounting surface, 6, 8 or 10”. For outdoor applications silicone seal is required across the top and down the sides between the housing and mounting surface.
The 3101LED luminaire uses a 4 up, high efficiency PCB and a 94% PMMA asymmetric distribution lens.
The 3101LED series is listed for use in wet locations above 4 feet to UL and CSA Standards. L70 minimum at 50,000 hours. IP65 rated.
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
INTERIOR/EXTERIOR
SAMPLE CATALOG NUMBER: 3101 - 12L - 40 - 120 - T3 - WTUsing this catalog number would order 1 model 3101 wall mount luminaire using type III optic and a 12 watt LED module with a color temperature of 4000K wired to 120 volts, painted white texture polyester powder coat.
*Standard configuration unless otherwise specified
4"4.5"
4"
4"
4.34"
1
2
¹Nominal LED Power ²Delivered lumens (4000K, 70CRI)
OPTIONS
70
SC
SC1
WP (_”)
70 CRI
surface wiringconduit feedcanopy
surface wiring canopy
wall plate(specify 6,8 or 10”)
Tessera 3101LED
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
*Based on system power.
3101-12L with Type 3 Optic
Machined Aluminum Top Plate
Extruded Aluminum Housing 6063 T5 Aluminum Alloy, high corrosion resistance and low copper content (<0.1%)
Sealed Optical Assembly
Driver (not shown) constant current, 250mA. 120-277VOutput Over-Voltage, Output Over-Current and Output ShortCircuit Protection with Auto Recovery
All stainless steel hardware
Tessera 3101-12L-40-T3-70Luminaire Lumens 1585Luminaire Watts 12.77Luminaire Efficacy Rating 125BUG Rating B1-U1-G1CCT/CRI 4000K/70
Mounting Plate
Product CCT CRI Delivered Lumens Nominal LED Power System Power Lumens per Watt*
3101-12L
3101-12L
3101-12L
3101-12L
3000
4000
3000
4000
70
70
80
80
1472
1585
1209
1287
12
12
12
12
12.77
12.77
12.77
12.77
115.3
124.1
94.7
100.8
233
466
699
932
1
2
SinkPAD-II PCB Technology with Luxeon M LEDs
Tessera Surface Canopy Option (For Use with 3100, 3101, 3103, 3121)
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Surface Wiring Conduit Feed Canopy (-SC)Extruded Aluminum, Painted to MatchSuitable for 1/2” Conduit Feed (No J-Box Required)2 Locations, Opposing SidesDriver HousingSuitable for Ceiling and Wall Mount Installations
Surface Wiring Canopy (-SC1)Extruded Aluminum, Painted to MatchDriver Housing, for mounting installationswith no J-Box or incorrect size J-BoxSuitable for Ceiling and Wall Mount Installations
4”3.3”
Ø.188”(4)
Ø.219”(4)
3.5”
4”
Wall Surface Mounting Plate Detail
6.0”
4.5” 1.5”
4.0”
Only provided withconduit feed surface canopy (-SC)
Surface Canopy
Tessera 3103LED Up/Down Wall Mount Light
MODEL VOLTCOLOR TEMPERATURELED MODULE DISTRIBUTION - UP COLOR
3103 2 x 6L 120*
208
240
277
SP
FL
WFL
OVAL
20° spot
34° flood
48° wide flood
63° x 24°
OPTIONS
SC
SC1
DIM
NAT
WP( _”)
surface wiringconduit feedcanopy
surface wiring canopy
dimming (0-10V)
natatoriumconstruction
wall plate(specify 6, 8 or 10”)
40*
35
30
27
4000K
3500K
3000K
2700K
2 x 6 watts11400 lumens2
2 x 4.5 watts11000 lumens2
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAll aluminum construction, stainless steel tamper resistant hardware, acrylic lens.
Electrical ComponentsConstant current driver 350mA or 250mA, -30°C starting temperature, Luxeon COB LED with Zhaga compliant socket, 80 CRI standard.Optional dimming driver compatible with IEC60929:2006 0-10V ballast controls.
The 3103LED series is designed for wall mounting. The LED driver is integrally fixed to a mounting plate and designed to fit into a 4” octagon j-box (by others). The LED driver supplied with the fixture uses 4.5 cubic inches of J-Box volume. A suitable J-Box example is 15 cubic inch capacity Iberville 54151 (not included). Optional surface wiring box suitable for 1/2” conduit feed. Optional wall plate available to cover mounting surface, 6, 8 or 10” square. Maximum fixture weight 4 lbs.
The 3103LED luminaire uses Chip-on-Board technology with Zhaga Book 3 compliant socket, high efficiency TIR optic and clear acrylic lens.
The 3103LED series is listed for use in wet locations to UL and CSA Standards. Reported L70 (10k) >55,000 hours per TM-21. Calculated L70 >100,000 hours at 45°C ambient. IP65 rated.
www.rebellelighting.com© 2019 REBELLE All rights reserved. R19 Specifications subject to change without notice.
INTERIOR/EXTERIOR
SAMPLE CATALOG NUMBER: 3103 - 2 x 6L - 40 - 120 - SP - FL - WTUsing this catalog number would order 1 model 3103 wall mount luminaire with 2 x 6 watt LED modules with a color temperature of 4000K with a spot distribution up and a flood distribution down, wired to 120 volts, painted white texture polyester powder coat.
*Standard configuration unless otherwise specified
4"4.5"
4"
4"
¹Nominal LED Power ²Total delivered lumens (4000K, 80CRI)
2 x 4.5L
DISTRIBUTION - DOWN
SP
FL
WFL
OVAL
20° spot
34° flood
48° wide flood
63° x 24°
Tessera 3103LED
www.rebellelighting.com© 2019 REBELLE All rights reserved. R19 Specifications subject to change without notice.
*Based on system power.
1
2
WFL (48° Wide Flood Optic)*
Extruded Aluminum Housing 6063 T5 Aluminum Alloy, high corrosion resistance and low copper content (<0.1%)
Machined Aluminum Lens Frame with Clear Acrylic Lens
Luxeon COB LED
Driver (not shown) constant current, 350mA or 250mA. 120-277VOutput Over-Voltage, Output Over-Current and Output ShortCircuit Protection with Auto Recovery
All stainless steel hardware
FL (34° Flood Optic)* SP (20° Spot Optic)*
Mounting Plate
Product CCT CRI Delivered Lumens Nominal LED Power System Power Lumens per Watt*
3103-2 x 6L
3103-2 x 4.5L
4000
4000
80
80
700/700
500/500
12 watts
9 watts
13.63 watts
9.64 watts
102.7
103.7
TIR Optic, Zhaga Book 3 Compliant
1
2
1
2
Lumen Multipliers 3500K - 0.962 3000K - 0.944 2700K - 0.923 90 CRI - 0.842
Machined Aluminum Lens Frame with Clear Acrylic Lens
1
2
OVAL (63° x 24°)
Tessera Surface Canopy Option (For Use with 3100, 3101, 3103, 3121)
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Surface Wiring Conduit Feed Canopy (-SC)Extruded Aluminum, Painted to MatchSuitable for 1/2” Conduit Feed (No J-Box Required)2 Locations, Opposing SidesDriver HousingSuitable for Ceiling and Wall Mount Installations
Surface Wiring Canopy (-SC1)Extruded Aluminum, Painted to MatchDriver Housing, for mounting installationswith no J-Box or incorrect size J-BoxSuitable for Ceiling and Wall Mount Installations
4”3.3”
Ø.188”(4)
Ø.219”(4)
3.5”
4”
Wall Surface Mounting Plate Detail
6.0”
4.5” 1.5”
4.0”
Only provided withconduit feed surface canopy (-SC)
Surface Canopy
Tessera 3121LED Surface Ceiling Mount Lighting
MODEL VOLTCOLOR TEMPERATURELED MODULE DISTRIBUTION COLOR
3121 12L 120*
208
240
277
SP
FL
WFL
VWFL
19° spot
30° flood
45° wide flood
94° very wide flood
OPTIONS
90
DIM
1
2
3
SC
SC1
CP( _”)
NAT
90 CRI
dimming (0-10V)
painted accent plate
copper accent plate
stainless steel accentplate
surface wiring conduit feed canopy
surface wiring canopy
ceiling plate(specify 6, 8 or 10”)
natatoriumconstruction
40*
35
30
27
4000K
3500K
3000K
2700K
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAll aluminum construction, stainless steel tamper resistant hardware, acrylic lens.
Electrical ComponentsConstant current driver 350mA or 250mA, Luxeon COB LED with Zhaga compliant socket. 80 CRI standard. Optional dimming driver compatible with IEC60929:2006 0-10V ballast controls.
The 3121LED series is designed for ceiling mounting. The LED driver is integrally fixed to a mounting plate and designed to fit into a 4” octagon j-box (by others). The LED driver supplied with the fixture uses 4.5 cubic inches of J-Box volume. A suitable J-Box example is 15 cubic inch capacity Iberville 54151 (not included). Optional surface wiring canopy suitable for 1/2” conduit feed (no j-box required). Optional ceiling plate available to cover mounting surface, 6, 8 or 10” square. For outdoor applications silicone seal is required. Maximum fixture weight is 4 lbs.
The 3121LED luminaire uses Chip-on-Board technology with Zhaga Book 3 compliant socket, field changeable high efficiency twist lock reflectors and clear acrylic lens.
The 3121LED series is listed for use in wet locations to UL and CSA Standards, covered ceiling mount only. Reported L70 (10k) > 55,000 hours per TM-21. Calculated L70 >100,000 hours at 45°C ambient. IP65 rated.
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
INTERIOR/EXTERIOR
SAMPLE CATALOG NUMBER: 3121 - 12L - 40 - 120 - SP - 1 - WTUsing this catalog number would order 1 model 3121 ceiling mount luminaire using spot optics and a 12 watt LED module with a color temperature of 4000K wired to 120 volts with a decorative accent plate painted to match the luminaire in white texture polyester powder coat.
*Standard configuration unless otherwise specified
Luminaire shown with optional accent plate
4"
4.75"4" 4" 4"
6.25"
4.5"4.75"
4.8" 4.8"
4.8" 4.8"
4" 4" 4"
1 x 12 watts11219 lumens2
1 x 9 watts1930 lumens2
¹Nominal LED Power ²Delivered lumens (4000K, 80CRI)
9L
Tessera 3121LED
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Extruded Aluminum Housing 6063 T5 Aluminum Alloy, high corrosion resistance and low copper content (<0.1%)
Machined Aluminum Lens Frame with Clear Acrylic Lens
Luxeon COB LED with Zhaga Book 3 Compliant Socket
Driver (not shown) constant current, 350mA or 250mA. 120-277VOutput Over-Voltage, Output Over-Current and Output ShortCircuit Protection with Auto Recovery
All stainless steel hardware
Mounting Plate
Twist Lock Reflector
335
670
1004
1339
1
2
WFL (45° Wide Flood Optic)* FL (30° Flood Optic)* SP (19° Spot Optic)*
576
1151
1727
2303
1
2
993
1986
2979
3973
1
2
155
310
465
620
1
2
VWFL (94° Very Wide Flood Optic)*
*Based on system power.
Product CCT CRI Delivered Lumens Nominal LED Power System Power Lumens per Watt*
3121-12L
3121-9L
4000
4000
80
80
1219
930
12 watts
9 watts
13.63 watts
9.64 watts
89.4
96.5
Lumen Multipliers 3500K - 0.962 3000K - 0.944 2700K - 0.923 90 CRI - 0.842
*Based on 3121-12L
Tessera Surface Canopy Option (For Use with 3100, 3101, 3103, 3121)
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Surface Wiring Conduit Feed Canopy (-SC)Extruded Aluminum, Painted to MatchSuitable for 1/2” Conduit Feed (No J-Box Required)2 Locations, Opposing SidesDriver HousingSuitable for Ceiling and Wall Mount Installations
Surface Wiring Canopy (-SC1)Extruded Aluminum, Painted to MatchDriver Housing, for mounting installationswith no J-Box or incorrect size J-BoxSuitable for Ceiling and Wall Mount Installations
4”3.3”
Ø.188”(4)
Ø.219”(4)
3.5”
4”
Wall Surface Mounting Plate Detail
6.0”
4.5” 1.5”
4.0”
Only provided withconduit feed surface canopy (-SC)
Surface Canopy
Tessera 3121LED Surface Ceiling Mount
MODEL VOLTCOLOR TEMPERATURELED MODULE DISTRIBUTION COLOR
3121 120*
208
240
277
SP
FL
19° spot
30° flood
OPTIONS
1(_)
2
3
CV
SC
SC1
CP( _”)
painted accent plate,specify finish, std.paint to match
copper accent plate
stainless steel accentplate
cut off visor
surface wiring conduit feed canopy
surface wiring canopy
ceiling plate(specify 6, 8 or 10”)
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAll aluminum construction, stainless steel tamper resistant hardware, acrylic lens.
Electrical ComponentsConstant current driver 350mA or 250mA, -30°C starting temperature.
The 3121LED series is designed for ceiling mounting. The LED driver is integrally fixed to a mounting plate and designed to fit into a 4” octagon j-box (by others). The LED driver supplied with the fixture uses 4.5 cubic inches of J-Box volume. A suitable J-Box example is 15 cubic inch capacity Iberville 54151 (not included). Optional surface wiring canopy suitable for 1/2” conduit feed or surface wiring canopy (no j-box required). Optional ceiling plate available to cover mounting surface, 6, 8 or 10” square. For outdoor applications silicone seal is required. Maximum fixture weight is 4 lbs.
The 3121LED luminaire uses a precision molded lens to direct the light, either spot or flood distributions are available. Luminaire comes standard with a honeycomb louver.
The 3121LED series is listed for use in wet locations to UL and CSA Standards, covered ceiling mount only. IP65 rated.
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18 Specifications subject to change without notice.
INTERIOR/EXTERIOR
SAMPLE CATALOG NUMBER: 3121 - 10L - AM - 120 - SP - 1 - WTUsing this catalog number would order 1 model 3121 ceiling mount luminaire using spot optics and a 10 watt amber LED module wired to 120 volts with a decorative accent plate painted to match the luminaire in white texture polyester powder coat.
*Standard configuration unless otherwise specified
Luminaire shown with optional accent plate
4"
4.75"4" 4" 4"
6.25"
4.5"4.75"
4.8" 4.8"
4.8" 4.8"
4" 4" 4"
¹Nominal LED Power ²Source lumens
10L
7L
10 watts1 887 lumens2
7 watts1 633 lumens2
AM amber LEDturtle friendly585-595nm
Shown with optional accent plate
Shown with optional accent plate
Wildlife Lighting Certification Number 2018-040
Turtle Friendly
Tessera 3121LED Turtle Friendly Ceiling Mount
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18 Specifications subject to change without notice.
Extruded Aluminum Housing 6063 T5 Aluminum Alloy, high corrosion resistance and low copper content (<0.1%)
Machined Aluminum Lens Frame with Clear Acrylic Lens
SinkPAD-II PCB Technology with Amber LEDs
Driver (not shown) constant current, 350mA or 250mA. 120-277V Output Over-Voltage, Output Over-Current and Output Short Circuit Protection with Auto Recovery
All stainless steel hardware
FL (30° Flood Optic) SP (15° Spot Optic)
Mounting Plate
576
1151
1727
2303
1
2
993
1986
2979
3973
1
2
Precision Moulded Lens with Flood or Spot Optics
‘CV’ Cut-Off Visor Option
7.75"
33.6°
0.5"
0.25"
3"
Tessera Surface Canopy Option (For Use with 3100, 3101, 3103, 3121)
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Surface Wiring Conduit Feed Canopy (-SC)Extruded Aluminum, Painted to MatchSuitable for 1/2” Conduit Feed (No J-Box Required)2 Locations, Opposing SidesDriver HousingSuitable for Ceiling and Wall Mount Installations
Surface Wiring Canopy (-SC1)Extruded Aluminum, Painted to MatchDriver Housing, for mounting installationswith no J-Box or incorrect size J-BoxSuitable for Ceiling and Wall Mount Installations
4”3.3”
Ø.188”(4)
Ø.219”(4)
3.5”
4”
Wall Surface Mounting Plate Detail
6.0”
4.5” 1.5”
4.0”
Only provided withconduit feed surface canopy (-SC)
Surface Canopy
Tessera 3121LED Type III Surface Ceiling Mount
MODEL VOLTCOLOR TEMPERATURELED MODULE DISTRIBUTION COLOR
3121 12L 120*
208
240
277
T3* type III optic
OPTIONS
70
1
2
3
SC
SC1
CP(_”)
70 CRI
painted accent plate
copper accent plate
stainless steel accentplate
surface wiring conduit feed canopy
surface wiring canopy
ceiling plate(specify 6, 8 or 10”)
40*
30
4000K
3000K
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAll aluminum construction, stainless steel tamper resistant hardware, polycarbonate lens.
Electrical ComponentsConstant current driver 250mA, LED Module 80CRI standard.
The 3121LED series is designed for ceiling mounting. The LED driver is integrally fixed to a mounting plate and designed to fit into a 4” octagon j-box (by others), except in surface wiring canopy mounting applications. The LED driver supplied with the fixture uses 4.5 cubic inches of J-Box volume. A suitable J-Box example is 15 cubic inch capacity Iberville 54151 (not included). For outdoor applications silicone seal is required. Maximum weight 4 lbs.
The 3121LED luminaire uses a 4 up, high efficiency PCB and a 94% PMMA asymmetric distribution lens.
The 3121LED series is listed for use in wet locations to UL and CSA Standards, covered ceiling mount only. L70 minimum at 50,000 hours. IP65 rated.
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
INTERIOR/EXTERIOR
SAMPLE CATALOG NUMBER: 3121 - 12L - 40 - 120 - T3 - 1 - SC - WTUsing this catalog number would order 1 model 3121 ceiling mount luminaire using a type III optic and a 12 watt LED module with a color temperature of 4000K wired to 120 volts with a surface wiring canopy, painted white texture polyester powder coat with an accent plate painted to match the luminaire.
*Standard configuration unless otherwise specified
Luminaire shown with decorative accent plate
4"4.8" 4.8"
4.8" 4.8"
1 x 12 watts1287 lumens
1
2
¹Nominal LED Power ²Delivered lumens (4000K, 80CRI)
4.75"4" 4" 4"
6.25"
4.5"4.75"
4" 4" 4"
Tessera 3121LED with Type 3 Optic
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
3121-12L with Type 3 Optic
Extruded Aluminum Housing 6063 T5 Aluminum Alloy, high corrosion resistance and low copper content (<0.1%)
IP67 Sealed Optical Assembly
Driver (not shown) constant current, 250mA. 120-277VOutput Over-Voltage, Output Over-Current and Output ShortCircuit Protection with Auto Recovery
All stainless steel hardware
Tessera 3121-12L-40-T3-70Luminaire Lumens 1585Luminaire Watts 12.77Luminaire Efficacy Rating 125BUG Rating B1-U1-G1CCT/CRI 4000/70
Mounting Plate
Product CCT CRI Delivered Lumens Nominal LED Power System Power Lumens per Watt*
233
466
699
932
1
2
SinkPAD-II PCB Technology with Luxeon M LEDs
*Based on system power.
3121-12L
3121-12L
3121-12L
3121-12L
3000
4000
3000
4000
70
70
80
80
1472
1585
1209
1287
12
12
12
12
12.77
12.77
12.77
12.77
115.3
124.1
94.7
100.8
Tessera Surface Canopy Option (For Use with 3100, 3101, 3103, 3121)
www.rebellelighting.com© 2017 REBELLE All rights reserved. R17 Specifications subject to change without notice.
Surface Wiring Conduit Feed Canopy (-SC)Extruded Aluminum, Painted to MatchSuitable for 1/2” Conduit Feed (No J-Box Required)2 Locations, Opposing SidesDriver HousingSuitable for Ceiling and Wall Mount Installations
Surface Wiring Canopy (-SC1)Extruded Aluminum, Painted to MatchDriver Housing, for mounting installationswith no J-Box or incorrect size J-BoxSuitable for Ceiling and Wall Mount Installations
4”3.3”
Ø.188”(4)
Ø.219”(4)
3.5”
4”
Wall Surface Mounting Plate Detail
6.0”
4.5” 1.5”
4.0”
Only provided withconduit feed surface canopy (-SC)
Surface Canopy
Tessera 3151LED Bollard
MODEL VOLTLED MODULE DISTRIBUTION COLOR 3151 120*
208
240
277
T2
T3
T4
T5
type II
type III
type IV
type V
OPTIONSDIM
CV
PC
TN
BCS
CF
0-10 volt dimming
cut off visor
photocontrol
tenon mount
base cover
provision for 1/2” conduit feed
1x12L
2x12L
12 watts1 1287 lumens2
2 x 12 watts1 2 x 1287 lumens2
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAll aluminum construction, stainless steel tamper resistant hardware, sealed optical assembly.
Electrical ComponentsConstant current driver 250mA, -30°C starting temperature, 80CRI standard.
The 3151LED series is designed to mount to a concrete base (by others). Anchor bolts are provided in hot dipped galvanized finish for new construction build. For optional retrofit builds, no anchor bolts would be provided and bollard can be mounted with hilti type fasteners (hilti anchors and hardware by others). Base plate is welded to bollard shaft. Base cover is offered as an option. Tenon mount is offered as an option for concealed mounting hardware.
The 3151LED luminaire uses a highly efficient silicone-sealed optical lens assembly with excellent temperature and UV stability to ensure long optical life clarity. Three standard distribution optics are available, type II, III, IV and V.
The 3151LED series is listed for use in wet locations to UL and CSA Standards. L70 (minimum) >50,000 hours.
www.rebellelighting.com© 2018 REBELLE All rights reserved. R20 Specifications subject to change without notice.
EXTERIOR
SAMPLE CATALOG NUMBER: 3151 - 1x12L - 40 - 120 - T2 - WTUsing this catalog number would order 1 single head model 3151 bollard luminaire with a 12 watt LED module, 4000K color temperature, type II distribution optic, wired to 120 volts, painted white texture polyester powder coat.
*Standard configuration unless otherwise specified
7"
4.5"
4"
¹Nominal LED Power ²Delivered lumens (4000K, 80CRI)
COLOR TEMPERATURE40*
30
4000K
3000K
7"
4"
36.5"
10"
4.5"
4" 10"
Single1 x LED module
Double2 x LED module
Tessera 3151LED
www.rebellelighting.com© 2018 REBELLE All rights reserved. R20 Specifications subject to change without notice.
*Based on system power
Product CCT CRI Delivered Lumens Nominal LED Power System Power Lumens per Watt*
3151-12L 4000 80 1287 12 watts 12.77 watts 100.78
Lumen Multipliers 3000K - 0.939
Extruded Aluminum Housing 6063 T5 Aluminum Alloy, high corrosion resistance and low copper content (<0.1%)
SinkPAD-II PCB Technology with Luxeon M LED’s
Driver (not shown) constant current, 350mA or 250mA. 120-277V Output Over-Voltage, Output Over-Current and Output Short Circuit Protection with Auto Recovery
All stainless steel hardware
Sealed (IP 65 Rated) Optical Assembly
Standard Mount Single Head
Standard Mount Double Head
Tenon Mount Option
Provision for1/2” Conduit Entry
Ø .406 (4)
Ø .406 (4)
Ø .406 (4)
10” x 4.5”7” x 4.5”
3.5”
.906”
2.438”
3.5”
6.0”9.0”
Base Cover10.5” x 5” x 1”
Base Cover7.5” x 5” x 1”
Tessera 3151LED Bollard
MODEL VOLTLED MODULE DISTRIBUTION COLOR
3151 120*
208
240
277
FL 30° flood
OPTIONS
CV
PC
TN
BCS
CF
cut off visor
photocontrol
tenon mount
base cover
provision for 1/2” conduit feed
1x10L
1x7L
2x10L
2x7L
10 watts1 887 lumens2
7 watts1 633 lumens2
2 x 10 watts1 2 x 887 lumens2
2 x 7 watts1 2 x 633 lumens2
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAll aluminum construction, stainless steel tamper resistant hardware, precision molded lens.
Electrical ComponentsConstant current driver 350mA or 250mA, -30°C starting temperature.
The 3151LED series is designed to mount to a concrete base (by others). Anchor bolts are provided in hot dipped galvanized finish for new construction build. For optional retrofit builds, no anchor bolts would be provided and bollard can be mounted with hilti type fasteners (hilti anchors and hardware by others). Base plate is welded to bollard shaft. Base cover is offered as an option. Tenon mount is offered as an option for concealed mounting hardware.
The 3151LED luminaire uses a precision molded lens to direct the light with a flood distribution. The luminaire comes standard with honeycomb louver.
The 3151LED series is listed for use in wet locations to UL and CSA Standards. L70 (minimum) >50,000 hours. IP65 rated optical compartment.
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18 Specifications subject to change without notice.
EXTERIOR
SAMPLE CATALOG NUMBER: 3151 - 1x10L - AM - 120 - FL - WTUsing this catalog number would order 1 single head model 3151 bollard luminaire with a 10 watt amber LED module, flood optic, wired to 120 volts, painted white texture polyester powder coat.
*Standard configuration unless otherwise specified
7"
4.5"
4"
¹Nominal LED Power ²Source lumens
COLOR TEMPERATURE
AM amber LEDturtle friendly585-595nm
7"
4"
36.5"
10"
4.5"
4" 10"
Single1 x LED module
Double2 x LED module
Turtle Friendly
Wildlife Lighting Certification Number 2018-040
Tessera 3151LED Turtle Friendly Bollard
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18 Specifications subject to change without notice.
Extruded Aluminum Housing 6063 T5 Aluminum Alloy, high corrosion resistance and low copper content (<0.1%)
Machined Aluminum Lens Frame with Clear Acrylic Lens
SinkPAD-II PCB Technology with Amber LEDs
Driver (not shown) constant current, 350mA or 250mA. 120-277V Output Over-Voltage, Output Over-Current and Output Short Circuit Protection with Auto Recovery
All stainless steel hardware
FL (30° Flood Optic)
576
1151
1727
2303
1
2
Precision Molded Lens with Flood Optics
‘CV’ Cut-Off Visor Option
7"
33.6°
3"
Tessera 3203LED Up/Down Wall Mount Lighting
MODEL VOLTCOLOR TEMPERATURELED MODULE DISTRIBUTION - UP COLOR
3203 1 x 12L5
2 x 12L
1 x 9L5
2 x 9L
120*
208
240
277
SP
FL
WFL
VWFL
PB
19° spot
30° flood
45° wide flood
94° very wideflood
pencil beam5
8 watts1
3000K and4000K only
OPTIONS
DIM⁴
90
0 - 10 volt dimming
90 CRI
40*
35
30
27
4000K
3500K
3000K
2700K
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAll aluminum construction, stainless steel tamper resistant hardware, acrylic lens.
Electrical ComponentsConstant current driver 350mA or 250mA, Luxeon COB with Zhaga compliant socket, 80 CRI standard. Pencil beam uses a proprietary PCB with constant current driver 2080mA. Optional dimming driver compatible with IEC60929:2006 0-10V ballast controls.
The 3203LED series is designed for wall mounting. A heavy gauge mounting plate is secured to the wall and mounted independently of the recessed 4" octagon j-box (by others). The main housing hooks on to the mounting plate and is secured by two stainless steel set screws. For outdoor applications silicone seal is required across the top and down the sides between the housing and mounting surface. Maximum fixture weight 9 lbs.
The 3203LED luminaire uses Chip-on-Board technology with Zhaga Book 3 compliant socket, field changeable high efficiency twist lock reflectors and clear acrylic lens. Pencil beam optic is a fixed optic (FWHM 7° x 55°) mounted to a proprietary PCB.
The 3203LED series is listed for use in wet locations to UL and CSA Standards. Reported L70 (10k) >55,000 hours per TM-21. Calculated L70 >100,000 hours at 45°C ambient. IP65 rated.
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18.1 Specifications subject to change without notice.
INTERIOR/EXTERIOR
4"
8.25"
SAMPLE CATALOG NUMBER: 3203 - 2 x 12L - 40 - 120 - SP - SP - 1(WT) - WTUsing this catalog number would order 1 model 3203 wall mount luminaire using 2 - 12 watt LED modules with spot optics for the up and down distribution with a colortemperature of 4000K wired to 120 volts, painted white texture polyester powder coat with the decorative accent plate painted to match the luminaire.
5.71"
*Standard configuration unless otherwise specified
4.75"
4"5.33"
DISTRIBUTION - DOWN
SP
FL
WFL
VWFL
T3
PB
¹Nominal LED Power ²Delivered lumens (4000K, 80CRI), not applicable to PB 3See Tessera 3101 specification sheet for details ⁴Not available with pencil beam optic5Pencil beam LED module has a nominal LED power of 8 watts, replaces COB LED module watts. Not available in 347 volt.**If ordering single module specify whether up(U) or down(D) distribution is desired ie. 3203-1x12L-40-120-FL(D)-0-WT
19° spot
30° flood
45° wide flood
94° very wideflood
type III optic3
pencil beam5
8 watts1
3000K and 4000K only
ACCENT PLATE
0
1(_)
2
3
no accentplate painted plate (specifyfinish, std paint to match)
copper plate
stainless steel plate
1 x 12 watts11219 lumens2
2 x 12 watts12438 lumens2
1 x 9 watts1930 lumens2
2 x 9 watts11860 lumens2
Tessera 3203LED
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18.1 Specifications subject to change without notice.
Machined Aluminum Top Plate
Extruded Aluminum Housing 6063 T5 Aluminum Alloy, high corrosion resistance and low copper content (<0.1%)
Machined Aluminum Lens Frame with Clear Acrylic Lens
Luxeon COB LED with Zhaga Book 3 Compliant Socket
Drivers (1 or 2) constant current, 350mA or 250mA. 120-277VOutput Over-Voltage, Output Over-Current and Output ShortCircuit Protection with Auto RecoveryPencil Beam - Constant Current Driver 2080mA
Mounting Plate
Twist Lock Reflector
335
670
1004
1339
1
2
WFL (45° Wide Flood Optic)* FL (30° Flood Optic)* SP (19° Spot Optic)*
576
1151
1727
2303
1
2
993
1986
2979
3973
1
2
155
310
465
620
1
2
VWFL (94° Very Wide Flood Optic)*
*Based on 12L down only
*Based on system power.
Product CCT CRI Delivered Lumens Nominal LED Power System Power Lumens per Watt*
3203-2x12L
3203-1x12L
3203-2x9L
3203-1x9L
4000
4000
4000
4000
80
80
80
80
2438
1219
1860
930
2 x 12 watts
1 x 12 watts
2 x 9 watts
1 x 9 watts
27.26 watts
13.63 watts
19.28 watts
9.64 watts
89.4
89.4
96.5
96.5
Lumen Multipliers 3500K - 0.962 3000K - 0.944 2700K - 0.923 90 CRI - 0.842
All stainless steel hardware
Decorative Accent Plate (optional)
Tessera 3204LED Wall Mount Lighting
MODEL VOLTCOLOR TEMPERATURELED MODULE DISTRIBUTION COLOR
3204 2 x 12L 120*
208
240
277
SP
FL
WFL
VWFL
T3
19° spot
30° flood
45° wide flood
94° very wide flood
type III optic3
OPTIONS
DIM
90
0 - 10 volt dimming
90 CRI
40*
35
30
27
4000K
3500K
3000K
2700K
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAll aluminum construction, stainless steel tamper resistant hardware, acrylic lens.
Electrical ComponentsConstant current driver 350mA or 250mA, Luxeon COB with Zhaga compliant socket, 80 CRI standard. Optional dimming driver compatible with IEC60929:2006 0-10V ballast controls.
The 3204LED series is designed for wall mounting. A heavy gauge mounting plate is secured to the wall and mounted independently of the recessed 4" octagon j-box (by others). The main housing hooks on to the mounting plate and is secured by two stainless steel set screws. For outdoor applications silicone seal is required across the top and down the sides between the housing and mounting surface. Maximum fixture weight 9 lbs.
The 3204LED luminaire uses Chip-on-Board technology with Zhaga Book 3 compliant socket, field changeable high efficiency twist lock reflectors and clear acrylic lens.
The 3204LED series is listed for use in wet locations to UL and CSA Standards. Reported L70 (10k) >55,000 hours per TM-21. Calculated L70 >100,000 hours at 45°C ambient. IP65 rated.
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18 Specifications subject to change without notice.
INTERIOR/EXTERIOR
4"4.75"
8.25"
SAMPLE CATALOG NUMBER: 3204 - 2 x 12L - 40 - 120 - SP - 1 - WTUsing this catalog number would order 1 model 3204 wall mount luminaire using spot optics and 2 - 12 watt LED modules with a color temperature of 4000K wired to 120 volts, painted white texture polyester powder coat with the accent plate painted to match.
5.33"
*Standard configuration unless otherwise specified
5.71"
4"
¹Nominal LED Power ²Delivered lumens (4000K, 80CRI) 3See Tessera 3101 specification sheet for details
2 x 12 watts12438 lumens2
2 x 9 watts11860 lumens2
2 x 9L
ACCENT PLATE
1*
2
3
painted plate (std)
copper plate
stainless steel plate
Tessera 3204LED
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18 Specifications subject to change without notice.
Machined Aluminum Top Plate
Extruded Aluminum Housing 6063 T5 Aluminum Alloy, high corrosion resistance and low copper content (<0.1%)
Machined Aluminum Lens Frame with Clear Acrylic Lens
Luxeon COB LED with Zhaga Book 3 Compliant Socket
Drivers (2) constant current, 350mA or 250mA. 120-277VOutput Over-Voltage, Output Over-Current and Output ShortCircuit Protection with Auto Recovery
Mounting Plate
Twist Lock Reflector
335
670
1004
1339
1
2
WFL (45° Wide Flood Optic) FL (30° Flood Optic) SP (19° Spot Optic)
576
1151
1727
2303
1
2
993
1986
2979
3973
1
2
155
310
465
620
1
2
VWFL (94° Very Wide Flood Optic)
*Based on system power.
Product CCT CRI Delivered Lumens Nominal LED Power System Power Lumens per Watt*
3204-12L
3204-9L
4000
4000
80
80
2438
1860
2 x 12 watts
2 x 9 watts
27.26 watts
19.28 watts
89.4
96.5
Lumen Multipliers 3500K - 0.962 3000K - 0.944 2700K - 0.923 90 CRI - 0.842
Accent Plate - Machined Aluminum(painted to match), Stainless Steel or Copper
All stainless steel hardware
Tessera 3303LED Wall Mount Up/Down Light
MODEL VOLTCOLOR TEMPERATURELED MODULE DISTRIBUTION - UP COLOR
3303 120*
208
240
277
347
SP
FL
WFL
VWFL
PB
19° spot
30° flood
45° wide flood
94° very wideflood
pencil beam4
8 watts1
3000K or 4000K only
OPTIONS
DIM³
90
0 - 10 volt dimming
90 CRI
40*
35
30
27
4000K
3500K
3000K
2700K
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAll aluminum construction, stainless steel tamper resistant hardware, acrylic lens.
Electrical ComponentsConstant current driver 620mA, 350mA or 250mA, Luxeon COB with Zhaga compliant socket, 80 CRI standard. Pencil beam uses a proprietary PCB with constant current driver 2080mA. Optional dimming driver compatible with IEC60929:2006 0-10V ballast controls.
The 3303LED series is designed for wall mounting and when specified without the optional accent plate is ADA compliant. A heavy gauge mounting plate is secured to the standard ears of a junction box or independently through holes provided in the mounting plate. The main housing body is secured on to the mounting plate by flat head screws on the side of the housing. For single distribution the luminaire can be mounted in the up or down position except using the type III optic which can be mounted in the down position only. Maximum fixture weight 9 lbs.
The 3303LED luminaire uses Chip-on-Board technology with Zhaga Book 3 compliant socket, field changeable high efficiency twist lock reflectors and clear acrylic lens. Pencil beam distribution uses a fixed optic (FWHM 7° x 55°) mounted to a proprietary PCB.
The 3303LED series is listed for use in wet locations to UL and CSA Standards. Reported L70 (10k) >55,000 hours per TM-21. Calculated L70 >100,000 hours at 45°C ambient. IP65 rated.
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18 Specifications subject to change without notice.
INTERIOR/EXTERIOR
4"
12"
SAMPLE CATALOG NUMBER: 3303 - 2 x 12L - 40 - 120 - PB - FL - 1(BT) - WTUsing this catalog number would order 1 model 3303 wall mount luminaire using two 12 watt LED modules with pencil beam up and flood down distribution, a color temperature of 4000K wired to 120 volts, painted white texture polyester powder coat with the decorative accent plate painted black texture polyester powder coat.
*Standard configuration unless otherwise specified
4.75"
DISTRIBUTION - DOWN
SP
FL
WFL
VWFL
PB
T3
¹Nominal LED Power ²Delivered(4000K, 80CRI), not applicable to PB ³Not available with pencil beam distribution 4Pencil beam LED module has a nominal LED power of 8 watts, replaces COB module watts. Not available in 347 volt.
19° spot
30° flood
45° wide flood
94° very wideflood
pencil beam4
8 watts1
3000K or 4000K only
type III optic(12L down only)
1 x 12L
1 x 23 watts12271 lumens2
2 x 23 watts14542 lumens2
1 x 12 watts11219 lumens2
2 x 12 watts12438 lumens2
1 x 9 watts1930 lumens2
2 x 9 watts11860 lumens2
2 x 12L
1 x 9L
2 x 9L
0
1(_)
2
3
no accent plate
painted plate (specifyfinish - std. painted to match)
copper plate
stainless steel plate
ACCENT PLATE
12"
4"4.375"
ADA Compliant Version(no accent plate)
Accent Plate Version
1 x 23L
2 x 23L
Tessera 3303LED
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18 Specifications subject to change without notice.
Extruded Aluminum Housing 6063 T5 Aluminum Alloy, high corrosion resistance and low copper content (<0.1%)
Machined Aluminum Lens Frame with Clear Acrylic Lens
Luxeon COB LED with Zhaga Book 3 Compliant Socket
Drivers (1 or 2) Constant Current, 620mA, 350mA or 250mA. 120-277VOutput Over-Voltage, Output Over-Current and Output ShortCircuit Protection with Auto RecoveryPencil Beam - Constant Current Driver 2080mA
Mounting Plate
Twist Lock Reflector
WFL (45° Wide Flood Optic)* FL (30° Flood Optic)* SP (19° Spot Optic)*VWFL
(94° Very Wide Flood Optic)*
*Based on 12L down only +12 watt, Lumen output of type III optic varies from standard COB modules - see Tessera 3101 specification sheet for details.
*Based on system power.
Lumen Multipliers 3500K - 0.962 3000K - 0.944 2700K - 0.923 90 CRI - 0.842
All stainless steel hardware
Type III Optic Down Only (1585 lumens+)
335
670
1004
1339
1
2
576
1151
1727
2303
1
2
993
1986
2979
3973
1
2
155
310
465
620
1
2
233
466
699
932
1
2
Product CCT CRI Delivered Lumens Nominal LED Power System Power Lumens per Watt*
3303 - 1 x 23L
3303 - 2 x 23L
3303 - 1 x 12L
3303 - 2 x 12L
3303 - 1 x 9L
3303 - 2 x 9L
4000
4000
4000
4000
4000
4000
80
80
80
80
80
80
2271
4542
1219
2438
930
1860
1 x 23 watts
2 x 23 watts
1 x 12 watts
2 x 12 watts
1 x 9 watts
2 x 9 watts
26.00 watts
52.00 watts
13.63 watts
27.26 watts
9.64 watts
19.28 watts
87.0
87.0
89.4
89.4
96.5
96.5
Tessera 3313LED Wall Mount Up/Down Light
MODEL VOLTCOLOR TEMPERATURELED MODULE DISTRIBUTION - UP COLOR
3313 120*
208
240
277
347
SP
FL
WFL
VWFL
PB⁴
19° spot
30° flood
45° wide flood
94° very wideflood
pencil beam8 watts1
3000K or 4000K only
OPTIONS
DIM³
90
WP
0 - 10 volt dimming
90 CRI
wall plate (6, 8 or 10”)
40*
35
30
27
4000K
3500K
3000K
2700K
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAll aluminum construction, stainless steel tamper resistant hardware, acrylic lens.
Electrical ComponentsConstant current driver 620mA, 350mA or 250mA, Luxeon COB with Zhaga compliant socket, 80 CRI standard. Pencil beam uses a proprietary PCB with constant current driver 2080mA. Optional dimming driver compatible with IEC60929:2006 0-10V ballast controls.
The 3313LED series is designed for wall mounting. A mounting plate is provided to secure to a recessed 4” octagon junction box (by others). The main housing body and shallow canopy attach to the mounting plate through the sides of the canopy by flat head screws. Maximum fixture weight 9 lbs.
The 3313LED luminaire uses Chip-on-Board technology with Zhaga Book 3 compliant socket, field changeable high efficiency twist lock reflectors and clear acrylic lens. Pencil beam distribution uses a fixed optic (FWHM 7° x 55°) mounted to a proprietary PCB.
The 3313LED series is listed for use in wet locations to UL and CSA Standards. Reported L70 (10k) >55,000 hours per TM-21. Calculated L70 >100,000 hours at 45°C ambient. IP65 rated.
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18 Specifications subject to change without notice.
INTERIOR/EXTERIOR
4"
12"
SAMPLE CATALOG NUMBER: 3313 - 2 x 12L - 40 - 120 - PB - FL - 1(BT) - WTUsing this catalog number would order 1 model 3313 wall mount luminaire using 2 - 12 watt LED modules with pencil beam up and flood down distribution, a color temperature of 4000K wired to 120 volts, painted white texture polyester powder coat with the decorative accent plate painted black texture polyester powder coat.
4.75"
4"
DISTRIBUTION - DOWN
SP
FL
WFL
VWFL
PB4
T3
19° spot
30° flood
45° wide flood
94° very wideflood
pencil beam8 watts1
3000K or 4000K only
type III optic(12L down only)
1 x 12L
1 x 23 watts12271 lumens2
2 x 23 watts14542 lumens2
1 x 12 watts11219 lumens2
2 x 12 watts12438 lumens2
1 x 9 watts1930 lumens2
2 x 9 watts11860 lumens2
2 x 12L
1 x 9L
2 x 9L
0
1(_)
2
3
no accent plate
painted plate (specifyfinish - std. painted to match)
copper plate
stainless steel plate
ACCENT PLATE
4.875"
12" 4"
4"
4.5"
Accent Plate Version
1 x 23L
2 x 23L
*Standard configuration unless otherwise specified
¹Nominal LED Power ²Delivered(4000K, 80CRI), not applicable to PB ³Not available with pencil beam distribution 4Pencil beam LED module has a nominal LED power of 8 watts, replaces COB module watts. Not available in 347 volt.
Tessera 3313LED
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18 Specifications subject to change without notice.
Extruded Aluminum Housing 6063 T5 Aluminum Alloy, high corrosion resistance and low copper content (<0.1%)
Machined Aluminum Lens Frame with Clear Acrylic Lens
Luxeon COB LED with Zhaga Book 3 Compliant Socket
Drivers (1 or 2) Constant Current, 620 mA, 350mA or 250mA. 120-277VOutput Over-Voltage, Output Over-Current and Output ShortCircuit Protection with Auto RecoveryPencil Beam - Constant Current Driver 2080mA
Mounting Plate
Twist Lock Reflector
WFL (45° Wide Flood Optic)* FL (30° Flood Optic)* SP (19° Spot Optic)*VWFL
(94° Very Wide Flood Optic)*
*Based on 12L down only +Lumen output of type III optic varies from standard COB modules - see Tessera 3101 specification sheet for details.
All stainless steel hardware
Type III Optic Down Only (1585 lumens+)
335
670
1004
1339
1
2
576
1151
1727
2303
1
2
993
1986
2979
3973
1
2
155
310
465
620
1
2
233
466
699
932
1
2
Mounting Canopy
Accent Plate (optional)
*Based on system power.
Lumen Multipliers 3500K - 0.962 3000K - 0.944 2700K - 0.923 90 CRI - 0.842
Product CCT CRI Delivered Lumens Nominal LED Power System Power Lumens per Watt*
3313 - 1 x 23L
3313 - 2 x 23L
3313 - 1 x 12L
3313 - 2 x 12L
3313 - 1 x 9L
3313 - 2 x 9L
4000
4000
4000
4000
4000
4000
80
80
80
80
80
80
2271
4542
1219
2438
930
1860
1 x 23 watts
2 x 23 watts
1 x 12 watts
2 x 12 watts
1 x 9 watts
2 x 9 watts
26.00 watts
52.00 watts
13.63 watts
27.26 watts
9.64 watts
19.28 watts
87.0
87.0
89.4
89.4
96.5
96.5
Tessera 3403LED Wall Mount Up/Down Light
MODEL VOLTCOLOR TEMPERATURELED MODULE DISTRIBUTION - UP COLOR
3403 120*
208
240
277
347
SP
FL
WFL
VWFL
PB⁴
19° spot
30° flood
45° wide flood
94° very wideflood
pencil beam8 watts1
3000K or 4000K only
OPTIONS
DIM³
90
0 - 10 volt dimming
90 CRI
40*
35
30
27
4000K
3500K
3000K
2700K
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAll aluminum construction, stainless steel tamper resistant hardware, acrylic lens.
Electrical ComponentsConstant current driver 620 mA, 350mA or 250mA, Luxeon COB with Zhaga compliant socket, 80 CRI standard. Pencil beam uses a proprietary PCB with constant current driver 2080mA. Optional dimming driver compatible with IEC60929:2006 0-10V ballast controls.
The 3403LED series is designed for wall mounting and when specified without the optional accent plates is ADA compliant. A heavy gauge mounting plate is secured to the standard ears of a junction box or independently through holes provided in the mounting plate. The main housing body is secured on to the mounting plates by flat head screws on the side of the housing. Maximum fixture weight 10 lbs.
The 3403LED luminaire uses Chip-on-Board technology with Zhaga Book 3 compliant socket, field changeable high efficiency twist lock reflectors and clear acrylic lens. Pencil beam distribution uses a fixed optic (FWHM 7° x 55°) mounted to a proprietary PCB.
The 3403LED series is listed for use in wet locations to UL and CSA Standards. Reported L70 (10k) >55,000 hours per TM-21. Calculated L70 >100,000 hours at 45°C ambient. IP65 rated.
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18 Specifications subject to change without notice.
INTERIOR/EXTERIOR
4"
18"
SAMPLE CATALOG NUMBER: 3403 - 2 x 12L - 40 - 120 - PB - FL - 1(BT) - WTUsing this catalog number would order 1 model 3403 wall mount luminaire using 2 - 12 watt LED modules with pencil beam up and flood down distribution, a color temperature of 4000K wired to 120 volts, painted white texture polyester powder coat with the decorative accent plates painted black texture polyester powder coat.
4.75"
DISTRIBUTION - DOWN
SP
FL
WFL
VWFL
PB⁴
T3
19° spot
30° flood
45° wide flood
94° very wideflood
pencil beam8 watts1
3000K or 4000K only
type III optic(12L down only)
0
1(_)
2
3
no accent plates
painted plates (specifyfinish - std. painted to match)
copper plates
stainless steel plates
ACCENT PLATE
18"
4"
4.375"
ADA Compliant Version
4"
Accent Plate Version
1 x 12L
1 x 23 watts12271 lumens2
2 x 23 watts14542 lumens2
1 x 12 watts11219 lumens2
2 x 12 watts12438 lumens2
1 x 9 watts1930 lumens2
2 x 9 watts11860 lumens2
2 x 12L
1 x 9L
2 x 9L
1 x 23L
2 x 23L
*Standard configuration unless otherwise specified
¹Nominal LED Power ²Delivered(4000K, 80CRI), not applicable to PB ³Not available with pencil beam distribution 4Pencil beam LED module has a nominal LED power of 8 watts, replaces COB module watts. Not available in 347 volt.
Tessera 3403LED
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18 Specifications subject to change without notice.
Extruded Aluminum Housing 6063 T5 Aluminum Alloy, high corrosion resistance and low copper content (<0.1%)
Machined Aluminum Lens Frame with Clear Acrylic Lens
Luxeon COB LED with Zhaga Book 3 Compliant Socket
Drivers (1 or 2) Constant Current, 620mA, 350mA or 250mA. 120-277VOutput Over-Voltage, Output Over-Current and Output ShortCircuit Protection with Auto RecoveryPencil Beam - Constant Current Driver 2080mA
Mounting Plate
Twist Lock Reflector
All stainless steel hardware
Accent Plate (optional)
WFL (45° Wide Flood Optic)* FL (30° Flood Optic)* SP (19° Spot Optic)*VWFL
(94° Very Wide Flood Optic)*
*Based on 12L down only +Lumen output of type III optic varies from standard COB modules - see Tessera 3101 specification sheet for details.
Type III Optic Down Only (1585 lumens+)
335
670
1004
1339
1
2
576
1151
1727
2303
1
2
993
1986
2979
3973
1
2
155
310
465
620
1
2
233
466
699
932
1
2
*Based on system power.
Product CCT CRI Delivered Lumens Nominal LED Power System Power Lumens per Watt*
3403 - 1 x 23L
3403 - 2 x 23L
3403 - 1 x 12L
3403 - 2 x 12L
3403 - 1 x 9L
3403 - 2 x 9L
4000
4000
4000
4000
4000
4000
80
80
80
80
80
80
2271
4542
1219
2438
930
1860
1 x 23 watts
2 x 23 watts
1 x 12 watts
2 x 12 watts
1 x 9 watts
2 x 9 watts
26.00 watts
52.00 watts
13.63 watts
27.26 watts
9.64 watts
19.28 watts
87.0
87.0
89.4
89.4
96.5
96.5
Lumen Multipliers 3500K - 0.962 3000K - 0.944 2700K - 0.923 90 CRI - 0.842
Tessera 3413LED Wall Mount Up/Down Light
MODEL VOLTCOLOR TEMPERATURELED MODULE DISTRIBUTION - UP COLOR
3413 120*
208
240
277
347
SP
FL
WFL
VWFL
PB⁴
19° spot
30° flood
45° wide flood
94° very wideflood
pencil beam8 watts1
3000K or 4000K only
OPTIONS
DIM³
90
WP
0 - 10 volt dimming
90 CRI
wall plate(6, 8 or 10”)
40*
35
30
27
4000K
3500K
3000K
2700K
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAll aluminum construction, stainless steel tamper resistant hardware, acrylic lens.
Electrical ComponentsConstant current driver 620mA, 350mA or 250mA, Luxeon COB with Zhaga compliant socket, 80 CRI standard. Pencil beam uses a proprietary PCB with constant current driver 2080mA. Optional dimming driver compatible with IEC60929:2006 0-10V ballast controls.
The 3413LED series is designed for wall mounting. A mounting plate is provided to secure to a recessed 4” octagon junction box (by others). The main housing body and shallow canopy attach to the mounting plate through the sides of the canopy by flat head screws. Maximum fixture weight 10 lbs.
The 3413LED luminaire uses Chip-on-Board technology with Zhaga Book 3 compliant socket, field changeable high efficiency twist lock reflectors and clear acrylic lens. Pencil beam distribution uses a fixed optic (FWHM 7° x 55°) mounted to a proprietary PCB.
The 3413LED series is listed for use in wet locations to UL and CSA Standards. Reported L70 (10k) >55,000 hours per TM-21. Calculated L70 >100,000 hours at 45°C ambient. IP65 rated.
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18 Specifications subject to change without notice.
INTERIOR/EXTERIOR
4"
18"
SAMPLE CATALOG NUMBER: 3413 - 2 x 12L - 40 - 120 - PB - FL - 1(BT) - WTUsing this catalog number would order 1 model 3413 wall mount luminaire using 2 - 12 watt LED modules with pencil beam up and flood down distribution, a color temperature of 4000K wired to 120 volts, painted white texture polyester powder coat with the decorative accent plates painted black texture polyester powder coat.
4.75"
4"
DISTRIBUTION - DOWN
SP
FL
WFL
VWFL
PB⁴
T3
19° spot
30° flood
45° wide flood
94° very wideflood
pencil beam8 watts1
3000K or 4000K only
type III optic(12L down only)
1 x 23L 1 x 23 watts12271 lumens2
2 x 23 watts14542 lumens2
1 x 12 watts11219 lumens2
2 x 12 watts12438 lumens2
1 x 9 watts1930 lumens2
2 x 9 watts11860 lumens2
2 x 23L
1 x 9L
2 x 9L
0
1(_)
2
3
no accent plates
painted plates (specifyfinish - std. painted to match)
copper plates
stainless steel plates
ACCENT PLATE
4.875"
4"
4.5"
18"4"
Accent Plate Version
1 x 12L
2 x 12L
*Standard configuration unless otherwise specified
¹Nominal LED Power ²Delivered(4000K, 80CRI), not applicable to PB ³Not available with pencil beam distribution 4Pencil beam LED module has a nominal LED power of 8 watts, replaces COB module watts. Not available in 347 volt.
Tessera 3413LED
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18 Specifications subject to change without notice.
Extruded Aluminum Housing 6063 T5 Aluminum Alloy, high corrosion resistance and low copper content (<0.1%)
Machined Aluminum Lens Frame with Clear Acrylic Lens
Luxeon COB LED with Zhaga Book 3 Compliant Socket
Drivers (1 or 2) Constant Current, 620 mA, 350mA or 250mA. 120-277V or 347V, Output Over-Voltage, Output Over-Current and Output Short Circuit Protection with Auto RecoveryPencil Beam - Constant Current Driver 2080mA
Mounting Plate
Twist Lock Reflector
WFL (45° Wide Flood Optic)* FL (30° Flood Optic)* SP (19° Spot Optic)*VWFL
(94° Very Wide Flood Optic)*
*Based on 12L down only +Lumen output of type III optic varies from standard COB modules - see Tessera 3101 specification sheet for details.
All stainless steel hardware
Type III Optic Down Only (1585 lumens+)
335
670
1004
1339
1
2
576
1151
1727
2303
1
2
993
1986
2979
3973
1
2
155
310
465
620
1
2
233
466
699
932
1
2
Accent Plate (optional)
Canopy
*Based on system power.
Product CCT CRI Delivered Lumens Nominal LED Power System Power Lumens per Watt*
3413 - 1 x 23L
3413 - 2 x 23L
3413 - 1 x 12L
3413 - 2 x 12L
3413 - 1 x 9L
3413 - 2 x 9L
4000
4000
4000
4000
4000
4000
80
80
80
80
80
80
2271
4542
1219
2438
930
1860
1 x 23 watts
2 x 23 watts
1 x 12 watts
2 x 12 watts
1 x 9 watts
2 x 9 watts
26.00 watts
52.00 watts
13.63 watts
27.26 watts
9.64 watts
19.28 watts
87.0
87.0
89.4
89.4
96.5
96.5
Lumen Multipliers 3500K - 0.962 3000K - 0.944 2700K - 0.923 90 CRI - 0.842
Tessera 3931LED Pendant
MODEL VOLTCOLOR TEMPERATURELED MODULE DISTRIBUTION COLOR
3931 120*
208
240
277
347
OPTIONS
DIM
90
P( _”)
0 - 10 volt dimming
90 CRI
pendant length
40*
35
30
27
4000K
3500K
3000K
2700K
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAll aluminum construction, stainless steel tamper resistant hardware, acrylic lens.
Electrical ComponentsConstant current driver 900mA, 620mA, 350mA or 250mA, Luxeon COB with Zhaga compliant socket, 80 CRI standard. Optional dimming driver compatible with IEC60929:2006 0-10V ballast controls.
The 3931LED series is designed to mount to a recessed 4” octagon j-box (by others). Integral driver, mounted in the canopy, is standard with remote mounted driver as an option. Canopy is supplied with a 45 degree swivel as standard.
The 3931LED luminaire uses Chip-on-Board technology with Zhaga Book 3 compliant socket, field changeable high efficiency twist lock reflectors and clear acrylic lens.
The 3931LED series is listed for use in dry/damp locations to UL and CSA Standards. Reported L70 (10k) >55,000 hours per TM-21. Calculated L70 >100,000 hours at 45°C ambient.
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18 Specifications subject to change without notice.
INTERIOR
SAMPLE CATALOG NUMBER: 3931 - 12” - 1 x 12L - 40 - 120 - FL - INT - WTUsing this catalog number would order 1 model 3931 pendant mount luminaire with a length of 12” using one 12 watt LED modules with flood down distribution, a color temperature of 4000K wired to 120 volts, integral driver mounted in the canopy, painted white texture polyester powder coat.
*Standard configuration unless otherwise specified
6.4"
SP
FL
WFL
VWFL
¹Nominal LED Power ²Delivered(4000K, 80CRI) 3Not available in 347 volt
19° spot
30° flood
45° wide flood
94° very wide flood
1 x 32 watts1 3459 lumens2
1 x 23 watts12271 lumens2
1 x 12 watts11219 lumens2
1 x 9 watts1930 lumens2
12"18”30”
4"
3"
1 x 32L
1 x 23L
1 x 12L
1 x 9L3
Variable P( _”)
DRIVER LOCATION
INT*
REM
integral
remote
LENGTH
12”
18”
30”
Tessera 3931LED
www.rebellelighting.com© 2018 REBELLE All rights reserved. R18 Specifications subject to change without notice.
Extruded Aluminum Housing 6063 T5 Aluminum Alloy, high corrosion resistance and low copper content (<0.1%)
Machined Aluminum Lens Frame with Clear Acrylic Lens
Luxeon COB LED with Zhaga Book 3 Compliant Socket
Driver (1) Constant Current, 900mA, 620mA, 350mA or 250mA. 120-277V Output Over-Voltage, Output Over-Current and Output Short Circuit Protection with Auto Recovery
Twist Lock Reflector
All stainless steel hardware
WFL (45° Wide Flood Optic)* FL (30° Flood Optic)* SP (19° Spot Optic)*VWFL
(94° Very Wide Flood Optic)*
*Based on 12L
335
670
1004
1339
1
2
576
1151
1727
2303
1
2
993
1986
2979
3973
1
2
155
310
465
620
1
2
*Based on system power.
Product CCT CRI Delivered Lumens Nominal LED Power System Power Lumens per Watt*
3931 - 1 x 32L
3931- 1 x 23L
3931 - 1 x 12L
3931 - 1 x 9L
4000
4000
4000
4000
80
80
80
80
3459
2271
1219
930
1 x 32 watts
1 x 23 watts
1 x 12 watts
1 x 9 watts
38.00 watts
26.00 watts
13.63 watts
9.64 watts
91.0
87.0
89.4
96.5
Lumen Multipliers 3500K - 0.962 3000K - 0.944 2700K - 0.923 90 CRI - 0.842
A
B
DETAIL A
DETAIL B
Canopy Ball Suitable for up to 45° Sloped Ceilings
0.5” Stem, Length Varies Per Order
Encore ENC0 Wall Mount
MODEL VOLTCOLOR TEMPERATURELENGTH OPTIC - UP (U) COLOR
ENC0 120*
208
240
277
347+
SP
NF
FL
WF
20° spot
30° narrow
50° flood
80° wide
OPTIONS
DIM
WP
0 - 10 volt dimming
wall plate
40*
35
30
27
4000K
3500K
3000K
2700K
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAll aluminum construction, stainless steel tamper resistant hardware, acrylic lens.
Electrical ComponentsConstant current driver 350mA or 250mA, COB with Zhaga compliant socket, 80 CRI standard. Optional dimming driver compatible with IEC60929:2006 0-10V ballast controls.
The ENC0 series is designed for wall mounting over a recessed standard 2”x4” rectangular device/utility box (by others) which is located parallel to the luminaire. The mounting plate is secured directly to the rectangular device/switch box and the luminaire is hooked on the plate and secured with set screws. For mounting over a 4” octagon junction box the wall plate option should be ordered.
The ENC0 luminaire uses Chip-on-Board technology with Zhaga Book 3 compliant socket and high efficiency twist lock optics with clear acrylic lens.
The ENC0 series is listed for use in wet locations to UL and CSA Standards. Reported L70 > 50,000 hours. IP65 rated.
www.rebellelighting.com© 2021 REBELLE All rights reserved. R21 Specifications subject to change without notice.
INTERIOR/EXTERIOR
SAMPLE CATALOG NUMBER: ENC0 - 12” - S - 13L - 40 - 120 - SP(D) - INT - WTUsing this catalog number would order 1 model ENC0 12” wall mount luminaire with a single 13 watt LED module with a spot optic, downlight orientation, a color temperature of 4000K wired to 120 volts, integral driver, painted white texture polyester powder coat.
OPTIC - DOWN (D)
13 watts11535 lumens2
9 watts11123 lumens2
*Standard configuration unless otherwise specified¹Nominal LED Power ²Delivered (4000K, 80CRI), lumens per module +Remote driver only³For single module specify whether up (U) or down (D) orientation is required
12”
18”
24”
30”
MODULES
D
S
double
single³
WATTS
13L
9L
DRIVER LOCATION
REM
INT
remote
integral
SP
NF
FL
WF
20° spot
30° narrow
50° flood
80° wide
Remote Canopy ADA Compliant
Integral Canopy
12"18”24”30”
5.5"
3.5"
3"
5.4"4"
3"
Encore ENC0
www.rebellelighting.com© 2021 REBELLE All rights reserved. R21 Specifications subject to change without notice.
*Based on system power
FL (50° Flood Optic)*
Machined Aluminum Aperture Trim
Wall Canopy
Internal LED Heatsink
High Efficiency LED Driver(s), 1 or 2, Constant Current350mA or 250mA Universal Input Voltage 120-277VOver Voltage, Short Circuit and Over Temperature Protection
Chip-on-Board LED with Zhaga Book 3 Compliant Socket
Twist Lock Reflector
Clear Acrylic PMMA Lens
All stainless steel hardware
Remote Driver Box (-REM) is suitable for interior, dry locationsonly. Box dimensions 13.7” L x 4.3” W x 2.8” H
Extruded Aluminum Housing 6061 Alloy
Product CCT CRI Delivered Lumens Nominal LED Power System Power Lumens per Watt*
ENC0-13L
ENC0-9L
4000
4000
80
80
1535
1123
13 watts
9 watts
12.9 watts
10.7 watts
118.9
104.9
Mounting Plate
*Based on ENC0-13L
446
891
1337
1782
1
2
701
1402
2103
2804
1
2
NF (30° Flood Optic)* SP (20° Flood Optic)*
1854
3708
5561
7415
1
2
210
420
630
841
1
2
WF (80° Wide Flood Optic)*
Encore ENC1 Wall Arm Mount
MODEL VOLTCOLOR TEMPERATURELENGTH COLOR
ENC1 120*
208
240
277
347+
OPTIONS
DIM 0 - 10 volt dimming40*
35
30
27
4000K
3500K
3000K
2700K
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAll aluminum construction, stainless steel tamper resistant hardware, acrylic lens.
Electrical ComponentsConstant current driver 500mA, 350mA or 250mA, COB with Zhaga compliant socket, 80 CRI standard. Optional dimming driver compatible with IEC60929:2006 0-10V ballast controls.
The ENC1 series is designed for wall mounting. A heavy gauge mounting plate is secured to the wall and mounted independently of the recessed 4” octagon j-box (by others). Integrally mounted driver uses 4.5 or 5.0 cubic inches of J-Box volume. A suitable J-Box example is 15 cubic inch capacity Iberville 54151 or 21 cubic inch capacity Iberville 54171 (not included). For ease of installation a 2.125” deep 21 inch cubic capacity J-Box is recommended when possible.
The ENC1 luminaire uses Chip-on-Board technology with Zhaga Book 3 compliant socket and high efficiency twist lock optics with clear acrylic lens.
The ENC1 series is listed for use in wet locations to UL and CSA Standards. Reported L70 > 50,000 hours. IP65 rated.
www.rebellelighting.com© 2021 REBELLE All rights reserved. R21 Specifications subject to change without notice.
INTERIOR/EXTERIOR
SAMPLE CATALOG NUMBER: ENC1 - 12” - 19L - 40 - 120 - SP - INT - WTUsing this catalog number would order 1 model ENC1 12” wall arm mount luminaire with 1 - 19 watt LED modules with a spot optic, a color temperature of 4000K wired to 120 volts, integral driver, painted white texture polyester powder coat.
OPTIC
19 watts12115 lumens2
13 watts11535 lumens2
9 watts11123 lumens2
*Standard configuration unless otherwise specified ¹Nominal LED Power ²Delivered (4000K, 80CRI), lumens per module +Remote driver only
8”
12”
18”
SP
NF
FL
WF
20° spot
30° narrow
50° flood
80° wide
WATTS
19L
13L
9L
DRIVER LOCATION
REM
INT
remote
integral
3.5"
5"
8"12”18”
6"
2.6"
Encore ENC1
www.rebellelighting.com© 2021 REBELLE All rights reserved. R21 Specifications subject to change without notice.
Wall Canopy
Machined Aluminum Aperture Trim
Internal LED Heatsink
Mounting Plate
Chip-on-Board LED with Zhaga Book 3 Compliant Socket
Twist Lock Reflector
Clear Acrylic PMMA Lens
All stainless steel hardware
High Efficiency LED Driver (not shown), Constant Current500mA, 350mA or 250mA Universal Input Voltage 120-277VOuput Over Voltage, Output Over Current and Short Circuit with Auto-Recovery Protection
Remote Driver Box (-REM) is suitable for interior, dry locationsonly. Box dimensions 13.7” L x 4.3” W x 2.8” H
Machined Aluminum Arm Extension and Hub
Extruded Heavy Wall Aluminum Housing 6061 Alloy
*Based on ENC1-13L
*Based on system power
Product CCT CRI Delivered Lumens Nominal LED Power System Power Lumens per Watt*
ENC1-19L
ENC1-13L
ENC1-9L
4000
4000
4000
80
80
80
2115
1535
1123
19 watts
13 watts
9 watts
19.4 watts
12.9 watts
10.7 watts
109.0
118.9
104.9
FL (50° Flood Optic)*
446
891
1337
1782
1
2
701
1402
2103
2804
1
2
NF (30° Flood Optic)* SP (20° Flood Optic)*
1854
3708
5561
7415
1
2
210
420
630
841
1
2
WF (80° Wide Flood Optic)*
Encore ENC2 Ceiling Mount
MODEL VOLTCOLOR TEMPERATURELENGTH COLOR
ENC2 120*
208
240
277
347+
OPTIONS
DIM 0 - 10 volt dimming40*
35
30
27
4000K
3500K
3000K
2700K
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAll aluminum construction, stainless steel tamper resistant hardware, acrylic lens.
Electrical ComponentsConstant current driver 500mA, 350mA or 250mA, COB with Zhaga compliant socket, 80 CRI standard. Optional dimming driver compatible with IEC60929:2006 0-10V ballast controls.
The ENC2 series is designed for ceiling mounting. A heavy gauge mounting plate is secured independently of the J-Box through holes provided. Integrally mounted driver uses 4.5 or 5.0 cubic inches of J-Box volume. A suitable J-Box example is 15 cubic inch capacity Iberville 54151 or 21 cubic inch capacity Iberville 54171 (not included). For ease of installation a 2.125” deep 21 inch cubic capacity J-Box is recommended when possible.
The ENC2 luminaire uses Chip-on-Board technology with Zhaga Book 3 compliant socket and high efficiency twist lock optics with clear acrylic lens.
The ENC2 series is listed for use in wet locations to UL and CSA Standards, suitable for covered ceilings only. Reported L70 > 50,000 hours. IP65 rated.
www.rebellelighting.com© 2021 REBELLE All rights reserved. R21 Specifications subject to change without notice.
INTERIOR/EXTERIOR
6.5”12.5"18.5”24.5”30.5”
SAMPLE CATALOG NUMBER: ENC2 - 12” - 19L - 40 - 120 - SP - REM - WTUsing this catalog number would order 1 model ENC2 12” ceiling mount luminaire with 19 watt LED module with a spot optic and a color temperature of 4000K wired to 120 volts, driver is remote mounted, luminaire is painted white texture polyester powder coat.
OPTIC
3.5"
5"
19 watts12115 lumens2
13 watts11535 lumens2
9 watts11123 lumens2
*Standard configuration unless otherwise specified ¹Nominal LED Power ²Delivered (4000K, 80CRI), lumens per module +Remote driver only
6”
12”
18”
24”
30”
SP
NF
FL
WF
20° spot
30° narrow
50° flood
80° wide
WATTS
19L+
13L
9L
DRIVER LOCATION
REM
INT
remote
integral
Encore ENC2
www.rebellelighting.com© 2021 REBELLE All rights reserved. R21 Specifications subject to change without notice.
*Based on system power
Ceiling Canopy
Machined Aluminum Aperture Trim
Internal LED Heatsink
Chip-on-Board LED with Zhaga Book 3 Compliant Socket
Twist Lock Reflector
Clear Acrylic PMMA Lens
All stainless steel hardware
High Efficiency LED Driver (not shown), Constant Current500mA, 350mA or 250mA Universal Input Voltage 120-277VOuput Over Voltage, Output Over Current and Short Circuit with Auto-Recovery Protection
Remote Driver Box (-REM) is suitable for interior, dry locationsonly. Box dimensions 13.7” L x 4.3” W x 2.8” H
Mounting Plate
Product CCT CRI Delivered Lumens Nominal LED Power System Power Lumens per Watt*
ENC2-19L
ENC2-13L
ENC2-9L
4000
4000
4000
80
80
80
2115
1535
1123
19 watts
13 watts
9 watts
19.4 watts
12.9 watts
10.7 watts
109.0
118.9
104.9
Extruded Heavy Wall Aluminum Housing 6061 Alloy
*Based on ENC2-13L
FL (50° Flood Optic)*
446
891
1337
1782
1
2
701
1402
2103
2804
1
2
NF (30° Flood Optic)* SP (20° Flood Optic)*
1854
3708
5561
7415
1
2
210
420
630
841
1
2
WF (80° Wide Flood Optic)*
Encore ENC2S Ceiling Mount
MODEL VOLTCOLOR TEMPERATURELENGTH COLOR
ENC2S 120*
208
240
277
347+
OPTIONS
DIM 0 - 10 volt dimming40*
35
30
27
4000K
3500K
3000K
2700K
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAll aluminum construction, stainless steel tamper resistant hardware, acrylic lens.
Electrical ComponentsConstant current driver 500mA, 350mA or 250mA, COB with Zhaga compliant socket, 80 CRI standard. Optional dimming driver compatible with IEC60929:2006 0-10V ballast controls.
The ENC2S series is designed for ceiling mounting. A heavy gauge mounting plate is secured independently of the recessed octagon J-Box (by others) through holes provided. Integrally mounted driver uses 4.5 or 5.0 cubic inches of J-Box volume. A suitable J-Box example is 15 cubic inch capacity Iberville 54151 or 21 cubic inch capacity Iberville 54171 (not included). For ease of installation a 2.125” deep 21 inch cubic capacity J-Box is recommended when possible.
The ENC2S luminaire uses Chip-on-Board technology with Zhaga Book 3 compliant socket and high efficiency twist lock optics with clear acrylic lens.
The ENC2S series is listed for use in wet locations to UL and CSA Standards, suitable for covered ceilings only. Reported L70 > 50,000 hours. IP65 rated.
www.rebellelighting.com© 2021 REBELLE All rights reserved. R21 Specifications subject to change without notice.
INTERIOR/EXTERIOR
SAMPLE CATALOG NUMBER: ENC2S - 3” - 13L - 40 - 120 - SP - INT - WTUsing this catalog number would order 1 model ENC2S 3” ceiling mount luminaire with a 13 watt LED module with a spot optic and a color temperature of 4000K wired to 120 volts, integral mount driver, luminaire is painted white texture polyester powder coat.
OPTIC
19 watts¹ 2115 lumens2
13 watts11535 lumens2
9 watts11123 lumens2
*Standard configuration unless otherwise specified ¹Nominal LED Power ²Delivered (4000K, 80CRI), lumens per module +Remote driver only
3” SP
NF
FL
WF
20° spot
30° narrow
50° flood
80° wide
WATTS
19L+
13L
9L
DRIVER LOCATION
REM
INT
remote
integral
5"
3"
3.5"
Encore ENC2S Ceiling Mount
www.rebellelighting.com© 2021 REBELLE All rights reserved. R21 Specifications subject to change without notice.
*Based on system power
Ceiling Canopy
Internal LED Heatsink
Chip-on-Board LED with Zhaga Book 3 Compliant Socket
Twist Lock Reflector
Machined Aluminum LED Module Aperture Trim
Clear Acrylic PMMA Lens
All stainless steel hardware
High Efficiency LED Driver (not shown), Constant Current500mA, 350mA or 250mA Universal Input Voltage 120-277VOuput Over Voltage, Output Over Current and Short Circuit with Auto-Recovery Protection
Remote Driver Box (-REM) is suitable for interior, dry locationsonly. Box dimensions 13.7” L x 4.3” W x 2.8” H
Mounting Plate
Product CCT CRI Delivered Lumens Nominal LED Power System Power Lumens per Watt*
ENC2S-19L
ENC2S-13L
ENC2S-9L
4000
4000
4000
80
80
80
2115
1535
1123
19 watts
13 watts
9 watts
19.4 watts
12.7 watts
10.7 watts
109.0
118.9
104.9
Extruded Heavy Wall Aluminum Housing 6061 Alloy
*Based on ENC2S-13L
FL (50° Flood Optic)*
446
891
1337
1782
1
2
701
1402
2103
2804
1
2
NF (30° Flood Optic)* SP (20° Flood Optic)*
1854
3708
5561
7415
1
2
210
420
630
841
1
2
WF (80° Wide Flood Optic)*
Encore ENC3 Pendant Mount
MODEL VOLTCOLOR TEMPERATURELENGTH COLOR
ENC3 120*
208
240
277
347+
OPTIONS
DIM
WL
0 - 10 volt dimming
wet location
40*
35
30
27
4000K
3500K
3000K
2700K
WT
BT
SM
AN
BZ
GM
WS
BM
RAL
white texture
black texture
silver metallic
aluminum natural
bronze
gunmetal
white satin
black matte
specify no.
CONSTRUCTION MOUNTING OPTICAL PROTECTION
MaterialsAll aluminum construction, stainless steel tamper resistant hardware, acrylic lens.
Electrical ComponentsConstant current driver 500mA, 350mA or 250mA, COB with Zhaga compliant socket, 80 CRI standard. Optional dimming driver compatible with IEC60929:2006 0-10V ballast controls.
The ENC3 series is designed for ceiling mounting. A heavy gauge mounting plate is secured independently of the recessed octagon J-Box (by others) through holes provided. Integrally mounted driver uses 4.5 or 5.0 cubic inches of J-Box volume. A suitable J-Box example is 15 cubic inch capacity Iberville 54151 or 21 cubic inch capacity Iberville 54171 (not included). For ease of installation a 2.125” deep 21 inch cubic capacity J-Box is recommended when possible.
The ENC3 luminaire uses Chip-on-Board technology with Zhaga Book 3 compliant socket and high efficiency twist lock reflector with clear acrylic lens.
The ENC3 series is listed for use in dry/damp locations to UL and CSA Standards. Optional wet location listing available. Reported L70 > 50,000 hours. IP65 rated.
www.rebellelighting.com© 2021 REBELLE All rights reserved. R21 Specifications subject to change without notice.
INTERIOR/EXTERIOR
SAMPLE CATALOG NUMBER: ENC3 - 12” - 19L - 40 - 120 - SP - REM - WTUsing this catalog number would order 1 model ENC3 12” pendant mount luminaire with 19 watt LED module with a spot optic and a color temperature of 4000K wired to 120 volts, driver is remote mounted, luminaire is painted white texture polyester powder coat.
OPTIC
19 watts12115 lumens2
13 watts11535 lumens2
9 watts11123 lumens2
*Standard configuration unless otherwise specified ¹Nominal LED Power ²Delivered (4000K, 80CRI), lumens per module +Remote driver only
12”
18”
24”
30”
SP
NF
FL
WF
20° spot
30° narrow
50° flood
80° wide
WATTS
19L
13L
9L
DRIVER LOCATION
REM
INT
remote
integral
vario
us
3.5"
5"
12"18”24”30”
Encore ENC3
www.rebellelighting.com© 2021 REBELLE All rights reserved. R21 Specifications subject to change without notice.
*Based on system power
Ceiling Canopy
1/2” Diameter Stem - Length Varies per Order
Internal LED Heatsink
Chip-on-Board LED with Zhaga Book 3 Compliant Socket
Twist Lock Reflector
Clear Acrylic PMMA Lens
All stainless steel hardware
High Efficiency LED Driver (not shown), Constant Current500mA, 350mA or 250mA Universal Input Voltage 120-277VOuput Over Voltage, Output Over Current and Short Circuit with Auto-Recovery Protection
Remote Driver Box (-REM) is suitable for interior, dry locationsonly. Box dimensions 13.7” L x 4.3” W x 2.8” H
Mounting Plate
Product CCT CRI Delivered Lumens Nominal LED Power System Power Lumens per Watt*
ENC3-19L
ENC3-13L
ENC3-9L
4000
4000
4000
80
80
80
2115
1535
1123
19 watts
13 watts
9 watts
19.4 watts
12.9 watts
10.7 watts
109.0
118.9
104.9
Extruded Heavy Wall Aluminum Housing 6061 Alloy
*Based on ENC3-13L
Hangstraight Swivel +/- 5 Degrees
Machined Aluminum Aperture Trim
FL (50° Flood Optic)*
446
891
1337
1782
1
2
701
1402
2103
2804
1
2
NF (30° Flood Optic)* SP (20° Flood Optic)*
1854
3708
5561
7415
1
2
210
420
630
841
1
2
WF (80° Wide Flood Optic)*