Oper
atin
g In
stru
ctio
ns Excellence Precision BalancesXS Models – Part 1
www.mt.com/excellence
Overview
Power Supply Aux 1 Aux 2 RS 23
1
33
3
5
6
7
8
9
10
11
13 14
15
1617
4
6
6
8
11
1
11
11
6
10
10
10
Overview of your XS precision balance
1 Terminal (for details see Operating Instruction – Part 2) 2 Display (Touch-sensitive “Touch Screen”) 3 Operating keys 4 Type name 5 Glass draft shield 6 Weighing pan 7 Draft shield element 8 Level indicator 9 Fastening point for anti-theft device 10 Safety foots (10 mg, 0.1 g + 1 g models) 11 Levelling screw 12 RS232C serial interface 13 Slot for second interface (optional) 14 Socket for AC adapter 15 Aux 1 (connection for “ErgoSens”, manual switch, or foot switch) 16 Aux 2 (connection for “ErgoSens”, manual switch, or foot switch) 17 Fastening for auxiliary display stand or terminal stand (optional)
“S” and “M” weighing platforms
Overview
3
12
1
5
2
68
9
13
141516
1718
3
3
4
7
11
3
10
11 6
18
1 Terminal with terminal support (for details see Operating Instruction – Part 2) 2 Display (Touch-sensitive “Touch Screen”) 3 Operating keys 4 Type name 5 Weighing pan 6 Points of attachment for terminal or cover 7 Cover 8 Level indicator 9 Fastening point for anti-theft device 10 Cover plate for below-the-balance weighing (hook optional) 11 Levelling screw 12 RS232C serial interface 13 Slot for second interface (optional) 14 Connector for terminal cable 15 Aux 1 (connection for “ErgoSens”, manual switch, or foot switch) 16 Aux 2 (connection for “ErgoSens”, manual switch, or foot switch) 17 Power cable 18 Fastening for auxiliary display stand or terminal stand (optional)
“L” weighing platform
Contents
4
Contents
1 Getting to know your balance .......................................................................................................................... 6
1.1 Introduction ................................................................................................................................................................. 61.1.1 Operating Instructions Part 1, this document ................................................................................................................. 61.1.2 Operating Instructions Part 2, separate document .......................................................................................................... 61.1.3 Operating Instructions Part 3, separate document .......................................................................................................... 61.2 Introducing the XS precision balances ........................................................................................................................... 71.3 What you should know about these instructions ............................................................................................................ 71.4 Safety has priority ........................................................................................................................................................ 8
Setting up the balance ............................................................................................................ 92.1 Unpacking and checking the standard equipment ......................................................................................................... 92.1.1 Unpacking the “Magic Cube” draft shield ....................................................................................................................... 92.1.2 The following components are standard equipment ..................................................................................................... 102.2 Setting up the balance ............................................................................................................................................... 112.2.1 Installing the “Magic Cube” draft shield and weighing pan ........................................................................................... 112.2.2 Placing the terminal on the “L” weighing platform ........................................................................................................ 122.2.3 Setting options with the draft shield glass (1 mg models) ............................................................................................ 132.2.4 Using the additional draft shield door (1 mg models) .................................................................................................. 142.3 Selecting the location and level of the balance ........................................................................................................... 152.3.1 Selecting the location ................................................................................................................................................ 152.3.2 Leveling the balance .................................................................................................................................................. 152.4 Power supply ............................................................................................................................................................. 162.4.1 “S” and “M” weighing platforms .................................................................................................................................. 162.4.2 “L” weighing platforms ................................................................................................................................................ 162.5 Transporting the balance ............................................................................................................................................ 162.5.1 Transporting over short distances ................................................................................................................................ 162.5.2 Transporting over long distances ................................................................................................................................. 172.6 Weighing below the balance ...................................................................................................................................... 17
3 Cleaning and service .................................................................................................................................... 18
4 Technical data .............................................................................................................................................. 19
4.1 General data ............................................................................................................................................................. 19
4.1.1 XS precision balances with “S” or “M” weighing platform» ............................................................................................. 194.1.2 XS precision balances with “L” weighing plattform ........................................................................................................ 214.2 Model-specific data .................................................................................................................................................... 224.2.1 XS precision balances with readability 1 mg, “S” platform with draft shield .................................................................... 224.2.2 XS precision balances with readability 10 mg, “S” platform with draft shield element ..................................................... 234.2.3 XS precision balances with readability 0.1 g, “S” platform ............................................................................................. 244.2.4 XS precision balances with readability 0.1 g / 1 g, “M” platform .................................................................................... 254.2.5 XS precision balances with readability of 0.1 g / 1 g, “L” platform .................................................................................. 274.2.6 Procedure for certified balances ................................................................................................................................. 284.3 Dimensions ............................................................................................................................................................... 304.3.1 XS precision balances with readability 1 mg, “S” platform with draft shield .................................................................... 304.3.2 XS precision balances with readability 10 mg, “S” platform with draft shield element ..................................................... 314.3.3 XS precision balances with readability 0.1 g, “S” platform ............................................................................................. 324.3.4 XS precision balances with readability 0.1 g / 1 g, “M” platform .................................................................................... 334.3.5 Dimensions of XS precision balances with “L” weighing platform .................................................................................. 35
Contents
5
4.4 Specifications of the RS232C interface ........................................................................................................................ 364.5 Specification of the “Aux” connections ......................................................................................................................... 364.6 MT-SICS Interface commands and functions ................................................................................................................ 37
5 Accessories and spare parts .......................................................................................................................... 39
5.1 Accessories ............................................................................................................................................................... 395.1.1 Accessories for all weighing platforms “S”, “M” and “L” ................................................................................................. 395.2 Spare parts ................................................................................................................................................................ 44
6 Index ........................................................................................................................................................... 46
Getting to know your balance
6
1 Getting to know your balanceIn this section you will be given basic information about your balance. Please read right through this section carefully even if you already have experience with METTLER TOLEDO balances; please pay special attention to the safety warnings!
1.1 IntroductionThank you for choosing a METTLER TOLEDO balance.
The balances of the XS line combine a large number of weighing and adjustment possibilities with exceptionally convenient opera-tion.
However, the different models have different characteristics regarding equipment and performance. Special notes in the text indicate where this makes a difference to operation.
The Operating Instructions for the XS balances consist of 3 separate documents, whose contents are listed in the following subsections.
1.1.1 Operating Instructions Part 1, this document
Contents: XS precision balances– Introduction
– Safety notes
– Setting up the balance
– Leveling the balance
– Cleaning and service
– Technical data
– Interface commands and MT-SICS functions
– Accessories
– Spare parts
1.1. Operating Instructions Part , separate document
Content: XS terminal, system and applications– Basic principles for using the terminal and the firmware
– System settings
– Applications
– Firmware (Software) Updates
– Error and status messages
– Conversion table for weight units
– SOP - Standard Operating Procedure
– Recommended printer settings
1.1.3 Operating Instructions Part 3, separate document
Content: XS adjustments and tests– Adjustments
– Tests
Getting to know your balance
7
1. Introducing the XS precision balancesThe XS family of precision balances comprises a range of precision balances which differ from each other in relation to their weighing range and resolution.
The following features are common to all models of the XS lines:
– Fully automatic adjustment “FACT” using internal weight.
– Built-in applications for normal weighing, statistics, formulation, density, percent weighing, piece counting, dynamic weighing and LabX Client.
– Integral RS232C interface.
– Slot for second interface (optional).
– Touch-sensitive graphics terminal (“Touch Screen”) for easy, convenient operation.
A brief word about standards, guidelines, and methods of quality assurance: The XS balances comply with usual standards and guide-lines. They support standard procedures, specifications, working methods, and reports according to GLP (Good Laboratory Practice), and allow the creation of SOPs (Standard Operating Procedure). In this respect, records of working procedures and adjustments become very important; for this purpose we recommend you to use a printer from the METTLER TOLEDO range, since these are optimally adapted to your balance. The XS balances conform to the applicable standards and guidelines and possess an CE declaration of conformity. METTLER TOLEDO is certified as manufacturer according to ISO 9001 and ISO 14001.
1.3 What you should know about these instructionsThe following conventions apply to the Operating Instructions: Part 1, Part 2 and Part 3:
– Key designations are indicated by double angular parentheses (e.g. «On/Off» or «J»).These symbols indicate safety notes and hazard warnings which, if ignored, can cause personal danger to the user, damage to the balance or other equipment, or malfunction-ing of the balance.
This symbol indicates additional information and notes. These make working with your balance easier, as well as ensuring that you use it correctly and economically.
Getting to know your balance
1.4 SafetyhaspriorityAlways operate and use your balance only in accordance with the Operating Instructions Part 1, Part 2 and Part 3.
The instructions for setting up your new balance must be strictly observed.
Iftheinstrumentisnotusedaccordingtothemanufacturer'sOperatingInstructions(Part1,Part2andPart3),protectionoftheinstrumentmaybeimpaired.
The balance may only be used in enclosed interior rooms. It is not advised to use the balance in hazardous environments.
Use only the AC adapter delivered with your balance, and check that the voltage printed on it is the same as your local power supply voltage. Only plug the adapter into a socket which is grounded.Note: The L weighing platform has a built-in power supply unit.
Do not use sharp objects to operate the keyboard of your balance!
Although your balance is very ruggedly constructed, it is nevertheless a precision instru-ment. Treat it with appropriate care, and it will reward you with many years of trouble-free service.
Do not open the balance: It does not contain any parts which can be maintained, re-paired, or replaced by the user. If you ever have problems with your balance, contact your METTLER TOLEDO dealer.
Use only balance accessories and peripheral devices from METTLER TOLEDO; they are optimally adapted to your balance.
DisposalIn conformance with the European Directive 2002/96/CE on Waste Electrical and Elec-tronic Equipment (WEEE) this device may not be disposed of in domestic waste. This also applies to countries outside the EU, per their specific requirements.
Please dispose of this product in accordance with local regulations at the collecting point specified for electrical and electronic equipment.
If you have any questions, please contact the responsible authority or the distributor from which you purchased this device.
Should this device be passed on to other parties (for private or professional use), the content of this regulation must also be related.
Thank you for your contribution to environmental protection.
Setting up the balance
9
A
B
C
Setting up the balance
This section describes how to unpack your new balance, set it up and prepare it for operation. On completion of the steps described in this section, your balance is ready for operation.
Note: The balance must be disconnected from the power supply when carrying out all setup and mounting work, as well as when the housing of the weighing terminal is opened during everyday operation.
.1 Unpacking and checking the standard equipmentOpen the packaging and carefully remove all components.
.1.1 Unpacking the “Magic Cube” draft shield
– Place the draft shield horizontally on a clean surface.
– Remove the adhesive tape (A).
– Open the draft shield cover.
– Pull the cardboard (B) upwards out of the weighing chamber.
– Close the draft shield cover.
– Release the holding strip (C) and pull it upwards to remove it.
Note: When removing the cardboard (B), hold the U-shaped draft shield glass so that it is not pulled away with it.
Setting up the balance
10
.1. The following components are standard equipmentAll types of “S” and “M” weighing platforms– Weighing platform and terminal– AC adapter and country-specific power cable– RS232C interface– Slot for second interface (optional)– Feedthroughs for below-the-balance weighing and for antitheft device– Operating Instructions Part 1 (this document), Part 2 and Part 3– Production certificate– EC declaration of conformity
XS precision balances with readability of 1 mg (“S” platform)– Weighing platform– “Magic Cube” draft shield with an additional draft shield door– Bottom plate– Weighing pan support– Weighing pan 127 x 127 mm– Protective cover for terminal
XS precision balances with readability of 10 mg (“S” platform)– Weighing platform with protective cover– Weighing pan support– Weighing pan 170 x 205 mm– Draft shield element
XS precision balances with readability of 0.1 g (“S” platform) and 0.1 g / 1 g (“M” platform)– Weighing platform with protective cover– Weighing pan support– Weighing pan • S platform: 170 x 205 mm • M platform: 237 x 237 mm
All types with “L” weighing platformsXS precision balances with readability of 0.1 g and 1 g– Weighing platform– Weighing pan 280 x 360 mm– Terminal with terminal support and protective cover– Country-specific power cable– RS232C interface– Slot for second interface (optional)– Ready for below-the-balance weighing (hook optional)– Feedthrough for antitheft device– Operating Instructions Part 1 (this document), Part 2 and Part 3– Production certificate– EC declaration of conformity
Setting up the balance
11
1
2
3
4
3
2
1
1
2
. Setting up the balance
..1 Installing the “Magic Cube” draft shield and weighing pan
Note: The U-shaped draft shield glass is not permanently connected to the draft shield housing. Always close the cover before picking up the draft shield. Hold the entire draft shield by the housing at the back. Always hold the draft shield with both hands and keep in a horizontal position.
Note: For setting options for the draft shield, see section 2.2.3.
XS precision balances with readability of 10 mg, “S” platform with draft shield elementPlace the following components on the balance in the specified order:
– Pan support (1)
– Weighing pan (2)
– Draft shield element (3) .–>
XS precision balances with readability of 1 mg, “S” platform with draft shieldPlace the following components on the balance in the specified order:
– Place draft shield (1) with closed cover, and then open.
– Bottom plate (2)
– Pan support (3)
– Weighing pan (4)
Note: It is also possible to work without the draft shield element (3). However, depending on the ambient conditions, the display of the results may be slightly more unstable.
XS precision balances with readability of 0.1 g, “S” platformPlace the following components on the balance in the specified order:
– Pan support (1)
– Weighing pan (2)
Setting up the balance
1
1
2
XS precision balances with readability of 0.1 g / 1 g, “M” platformPlace the following components on the balance in the specified order:
– Pan support (1)
– Weighing pan (2)
.. Placing the terminal on the “L” weighing platformThe terminal can be attached to the long or short side of the balance.
– Mount the weighing pan.
– Carefully turn the weighing platform over onto the weighing pan.
Attaching the terminal to the long side:– Dismantle the cover (B) by removing the 2 screws (A).
B
A
A D
C
E
– Attach the terminal to the terminal support (C) as shown, using the screws (A) from the cover that was removed.
– Insert the terminal cable (D) into the cable channel, as shown.
– Screw the connector of the terminal cable into the socket (E).
– Turn the balance back over into position.
Setting up the balance
13
F
F
A
B
..3 Setting options with the draft shield glass (1 mg models)The U-shaped draft shield glass (A) supports different setting options. The draft shield housing contains an additional draft shield pane (B), which can be used as required (see section 2.2.4).
Attaching the terminal to the short side:– Dismantle the cover (G) by removing the 2 screws (F).
– Attach the terminal with terminal support to the points of attachment (H) with the screws (F).
– Insert the terminal cable (D) into the cable channel, as shown.
– Screw the connector of the terminal cable into the socket (E).
– Turn the balance back over into position.
F
G
H D E
Setting up the balance
14
B
1
2
..4 Using the additional draft shield door (1 mg models)– Open the draft shield cover.
– Pull the draft shield door (B) upwards out of the rear panel.
– Insert the draft shield door into the housing from the side (left or right).• First position the draft shield door at the bottom (1) and then swivel it upwards (2) until you feel it snap into place (see dia-
gram).
Note: Check that the draft shield door is inserted correctly. The door must close easily. When transporting the balance, except for the terminal, also hold the draft shield, as this is fitted and not permanently connected to the weighing platform.
Setting up the balance
15
A
B B
A
.3 Selecting the location and level of the balanceYour balance is a precision instrument and will thank you for an optimum location with high accuracy and dependability.
.3.1 Selecting the locationChoose a position which is stable, free from vibration, and as nearly horizontal as pos-sible. The supporting surface must be able to bear the weight of the fully loaded balance safely.
Pay attention to the environmental conditions (see section 4.1).
Avoid:
– Direct sunlight
– Draft (e.g. from fans or air conditioning)
– Excessive fluctuations in temperature.
Further information can be found in Weighing the Right Way.
.3. Leveling the balanceBalances with “S” platform and readability of 1 mg
Align the balance horizontally by turning both leveling screws on the front of the balance housing until the air bubble is in the inner circle of the level indicator.
The position of the air bubble illustrates which leveling screw you need to turn (L = left leveling screw, R = right leveling screw) and in which direction so that the air bubble moves to the center.
Example: In this example, turn the left leveling screw counterclockwise.
Balances with “L” platform
Align the balance horizontally by turning the leveling screws of the balance housing until the air bubble is in the inner circle of the level indicator.
Balances with “S” or “M” platform and readability of 10 mg, 0.1 g or 1 g
– Remove the clamps (A) for the safety feet by turning them outwards.
– Now level the balance by turning both leveling screws (B) until the air bubble is in the inner circle of the level indicator.
– Secure the safety feet by turning the clamps (A) inwards as far as they will go.
Note: Turn the clamps (A) outwards as far as they will go (~ 90°), so that the safety feet can move freely.
The balance must be leveled and adjusted each time it is moved to a new location.
Setting up the balance
16
2.4 Powersupply
2.4.1 “S”and“M”weighingplatformsYour balance is supplied with an AC adapter and a country-specific power cable. The AC adapter is suitable for all line voltages in the range:
100 - 240 VAC, 50/60 Hz (for exact specifications, see section 4).
Check whether the local line voltage is in this range. Ifthisisnotthecase,onnoac-countconnectthebalanceortheACadaptertothepowersupply, but contact the responsible METTLER TOLEDO dealer.
Connect the AC adapter to the connection socket on the back of your balance (see figure) and to the power supply. Secure the connection to your balance by screwing the plug tight.
Once connected to the power supply, the balance performs a self-test and is then ready for operation.
Once connected to the power supply, the balance performs a self-test and is then ready for operation.
Note: If the display area remains dark, even though the power connection is working, disconnect the balance from the power supply, then check that the terminal cable is inserted correctly (see section 2.2.2).
2.5 TransportingthebalanceSwitch off the balance and remove the power cable and any interface cable from the balance.
2.5.1 TransportingovershortdistancesObserve the following instructions to transport your balance over a short distance to a new location.
Important:Guidethecablessothattheycannotbecomedamagedorinterferewiththeweighingprocess!TakecarethattheACadaptercannotcomeintocontactwithliquids!EnsurethattheACpowerpackforthebalanceisonlyusedinac-cordancewiththespecificationslistedinsection4.1.
2.4.2 “L”weighingplatformsYour balance has been supplied with a country-specific power cable.
First, check to see whether the power plug fits your local power supply connection. Ifthisisnotthecase,onnoaccountconnectthebalancetothepowersupply, but contact the responsible METTLER TOLEDO dealer.
Donotconnectthebalancetooutletsthatarenotgrounded!DonotuseextensioncordswithoutPEconduc-tors!Important:Guidethecablessothattheycannotbecomedamagedorinterferewiththeweighingprocess!Ensurethattheconnectorscannevercomeintocontactwithliquids!
Forbalanceswithadraftshield:Never lift the balance using the glass draft shield. Thedraftshieldisnotfas-tenedtothebalance.
Setting up the balance
17
A
B
Hold the weighing platform with both hands and lift. Carry the balance to the new location.
Note: Models with a glass draft shield: Carefully lift the draft shield from the weighing platform and put it aside.
– Remove the 2 screws (A) and the cover plate (B). The hanger is now accessible.
Then return the balance to its normal position and simply reinstall all components in the reverse order.
– Tilt the weighing platform backwards until the cover plate (B) is visible.Note: Do not place the weighing platform of 1 mg models on the location bolt for the pan support.
XS16001M / XS16000M / “L” platforms
B
A
Refer to the notes in section 2.3 regarding selection of an optimum location.
.5. Transporting over long distancesIf you would like to transport or send your balance over long distances, or if the balance may not be transported in an upright position, use the complete original packaging.
.6 Weighing below the balanceYour balance is equipped with a hanger for carrying out weighings below the work surface (weighing below the balance).
– Switch off the balance and remove the power cable and any interface cable from the balance.
– Remove the draft shield element (10 mg models).
– Remove the weighing pan and pan support.
– Remove the bottom plate (1 mg models with draft shield).
Note: For below-the-balance weighing with the M model (XS16001M/XS16000M) and all L models, you will need hook 11132565 from the accessories range.
Cleaning and service
18
3 Cleaning and serviceEvery now and then, clean the weighing pan, draft shield element, draft shield (depending on the model), housing and terminal of your balance using a damp cloth.
Please observe the following notes– On no account use cleaning agents, which contain solvents or abrasive ingredients, as this can result in
damage to the terminal overlay.
– Ensure that no liquid comes into contact with the balance, the terminal or the AC adapter.• The balance is protected against dust and water when it is fully set up (with pan support and weighing
pan).
– Never open the balance, terminal or AC adapter - they contain no components, which can be cleaned, repaired or replaced by the user.
Note: This also applies to the built-in clock battery in the balance.
Please contact your METTLER TOLEDO dealer for details of the available service options. Regular servicing by an authorized service engineer ensures constant accuracy for years to come and prolongs the service life of your balance.
Your balance is made from high-quality, durable materials and can therefore be cleaned with a standard, mild cleaning agent.
To thoroughly clean the U-shaped draft shield glass, carefully remove it from the draft shield.
Place it on a clean, soft surface, as illustrated in the diagram.
When reinserting the glass, ensure that it is in the correct position (see section 2).
Your balance is made from high-quality, durable materials and can therefore be cleaned with a standard, mild cleaning agent.
Technical data
19
4 Technical dataIn this section you will find the most important technical data for your balance.
4.1 General data
4.1.1 XS precision balances with “S” or “M” weighing platform»
Power supply• Power supply connector with AC/DC adapter:
11107909,Primary: 100-240 VAC, -15%/+10%, 50/60 HzSecondary: 12 VDC ±/-3%, 2.0 A (with electronic overload protection)
• Cable to AC adapter: 3-core, with country-specific plug
• Power supply to the balance: 12 VDC ±/-3%, 2.0 A, maximum ripple: 80 mVDCppUse only with a tested AC adapter with SELV output current.Ensure correct polarity
Protection and standards• Overvoltage category: Class II• Degree of pollution: 2• Protection: IP54, in use with weighing pan inserted, protected against dust and water• Standards for safety and EMC: See Declaration of Conformity• Range of application: For use only in closed interior rooms
Environmental conditions• Height above mean sea level: Up to 4000 m• Ambient temperature: 5-40 °C• Relative air humidity: Max. 80% at 31 °C, linearly decreasing to 50% at 40 °C, noncondensing
Materials• Housing: Die-cast aluminum, laquered, plastic and chrome steel• Terminal: Die-cast zinc, chromed and plastics• Weighing pan: Chrome-nickel steel X2CrNiMo-17-12-2• Wind shield: Plastic, chrome steel and glas• Wind shield element: Die-cast zinc, chromed
Technical data
20
4.1.1.1 ExplanatorynotesfortheMETTLERTOLEDOACadapterThe certified external power supply which conforms to the requirements for Class II double insulated equipment and it is not provided with a protective earth connection but with a functional earth connection for EMC purposes. Information about conformance of our products can be found in the brochure “Declaration of Conformity” which is coming with each product or can be downloaded from www.mt.com.
In case of testing with regard to the directive 2001/95/CE the power supply and the balance has to be handled as Class II double insulated equipment.
Consequently an earth bonding test is not required. Similarly it is not necessary to carry out an earth bonding test between the supply earth conductor and any exposed metalwork on the balance.
Because balances can be sensitive to static charges a leakage resistor, typically 10 kΩ, is connected between the earth connector and the power supply output terminals. The arrangement is shown in Fig. 1. This resistor is not part of the electrical safety arrangement and does not require testing at regular intervals.
Equivalentcircuitdiagram:
10 kΩ coupling resistor for electrostatic discharge
Input 100…240V AC Output 12V DC
Double Insulation
Plastic Housing
P
N
E
AC
DC
Technicaldata
21
4.1.2 XSprecisionbalanceswith“L”weighingplattformPowersupply• Powersupply: 115-240VAC,-15%/+10%,50/60Hz,0.4A• Powercable: 3-core,withcountry-specificplug
Protectionandstandards• Overvoltagecategory: ClassII• Degreeofpollution: 2• Protection: IP54,inusewithweighingpaninserted,protectedagainstdustandwater• StandardsforsafetyandEMC: SeeDeclarationofConformity• Rangeofapplication: Foruseonlyinclosedinteriorrooms
Environmentalconditions• Heightabovemeansealevel: Upto4000m• Ambienttemperature: 5-40°C• Relativeairhumidity: Max.80%at31°C,linearlydecreasingto50%at40°C,noncondensing
Materials• Housing: Sheetaluminum,diecast,laquered,plasticandchromesteel• Terminal: Die-castzinc,chromedandplastics• Weighingpan: Chrome-nickelsteelX5CrNi18-10
Technical data
4. Model-specific data
4..1 XS precision balances with readability 1 mg, “S” platform with draft shieldTechnical data (limit values)
Model XS03S XS403S XS603S XS603SDR XS1003S
Maximum capacity 210 g 410 g 610 g 610 g 1010 g
Maximum capacity, fine range – – – 120 g –
Readability 1 mg 1 mg 1 mg 10 mg 1 mg
Readability, fine range – – 1 mg –
Taring range 0…210 g 0…410 g 0…610 g 0…610 g 0…1010 g
Repeatability (at nominal load) sd 0.9 mg 0.9 mg 0.9 mg 6 mg 0.8 mg
Repeatability fine range (at nominal load) sd – – – 1 mg –
Linearity deviation 2 mg 2 mg 2 mg 6 mg 2 mg
Eccentricity deviation (test load) 3 mg (100 g) 3 mg (200 g) 3 mg (200 g) 10 mg (200 g) 3 mg (500 g)
Sensitivity offset (test load) 5 mg (200 g) 6 mg (400 g) 4.5 mg (600 g) 9 mg (600 g) 5 mg (1000 g)
Sensitivity temperature drift 1) 0.0005 %/°C 0.0005 %/°C 0.0002 %/°C 0.0002 %/°C 0.0002 %/°C
Sensitivity stability 2) 0.0025 %/a 0.0025 %/a 0.001 %/a 0.001 %/a 0.001 %/a
Settling time 1.5 s 1.5 s 1.5 s 1.5 s 1.5 s
Interface update rate 23 /s 23 /s 23 /s 23 /s 23 /s
Internal adjustment weights 3) 1 1 1 1 1
Balance dimensions (W x D x H) [mm] 194 x 366 x 276 194 x 366 x 276 194 x 366 x 276 194 x 366 x 276 194 x 366 x 276
Usable height of draft shield [mm] 175 175 175 175 175
Weighing pan dimensions (W x D) [mm] 127 x 127 127 x 127 127 x 127 127 x 127 127 x 127
Weight of balance [kg] 7.6 7.6 7.6 7.6 7.6
Typical data for determination of the measurement uncertainty
Model XS03S XS403S XS603S XS603SDR XS1003S
Repeatability sd 0.5mg+0.00015%·Rgr 0.5mg+0.00008%·Rgr 0.5mg+0.00005%·Rgr 4mg+0.00015%·Rgr 0.4mg+0.00002%·Rgr
Repeatability fine range sd – – – 0.6mg+0.00015%·Rgr –
Differential linearity deviation sd √(6x10-7mg·Rnt) √(3×10-7mg·Rnt) √(2×10-7mg·Rnt) √(2×10-7mg·Rnt) √(1.2×10-7mg·Rnt)
Differential eccentric load deviation sd 0.00015%·Rnt 0.00015%·Rnt 0.00015%·Rnt 0.00015%·Rnt 0.00006%·Rnt
Sensitivity offset sd 0.0008%·Rnt 0.0004%·Rnt 0.00025%·Rnt 0.0005%·Rnt 0.00015%·Rnt
Minimum weight 4) (according to USP) 1.5g+0.45%·Rgr 1.5g+0.24%·Rgr 1.5g+0.15%·Rgr 12g+0.45%·Rgr 1.2g+0.06%·Rgr
Minimum weight 4) (according to USP) fine range, – – – 1.8g+0.45%·Rgr –
Minimum weight 4) (@ U=1%, 2 sd) t 100mg+0.03%·Rgr 100mg+0.016%·Rgr 100mg+0.01%·Rgr 800mg+0.03%·Rgr 80mg+0.004%·Rgr
Minimum weight 4) (@ U=1%, 2 sd) fine range – – – 120mg+0.03%·Rgr –
Rgr = Gross weightRnt = Net weight (sample weight)sd = Standard deviationa = Year (annum)1) In the temperature range 10…30 °C2) Sensitivity drift/year after putting into operation for the first time , with the FACT self-calibration function activated3) The adjustment weights of the XS precision balances are made from stainless antimagnetic chrome-nickel steel.
The masses of the adjustment weights are traceable to the prototype kilogram which is the standard unit of mass kept in Paris.4) The minimum weight can be improved by the following measures:
– Selecting suitable weighing parameters – Choosing a better location – Using smaller taring containers
Technical data
3
4.. XS precision balances with readability 10 mg, “S” platform with draft shield elementTechnical data (limit values)
Model XS80S XS00S XS400S XS400SDR XS600S XS600SDR
Maximum capacity 810 g 2.1 k g 4.1 kg 4.1 kg 6.1 kg 6.1 kg
Maximum capacity, fine range – – – 0.8 kg – 1200 g
Readability 10 mg 10 mg 10 mg 100 mg 10 mg 100 mg
Readability, fine range – – – 10 mg – 10 mg
Taring range 0…810 g 0…2100 g 0…4100 g 0…4100 g 0…6100 g 0…6100 g
Repeatability (at nominal load) sd 8 mg 8 mg 8 mg 60 mg 8 mg 60 mg
Repeatability fine range (at nominal load) sd – – – 8 mg – 8 mg
Linearity deviation 20 mg 20 mg 20 mg 60 mg 20 mg 60 mg
Eccentricity deviation (test load) 20 mg (500 g) 30 mg (1 kg) 30 mg (2 kg) 100 mg (2 kg) 30 mg (2 kg) 100 mg (2 kg)
Sensitivity offset (test load) 60 mg (800 g) 50 mg (2 kg) 60 mg (4 kg) 60 mg (4 kg) 60 mg (6 kg) 150 mg (6 kg)
Sensitivity temperature drift 1) 0.0003 %/°C 0.0003 %/°C 0.0003 %/°C 0.0003 %/°C 0.0003 %/°C 0.0003 %/°C
Sensitivity stability 2) 0.0025 %/a 0.0025 %/a 0.0015 %/a 0.0015 %/a 0.0015 %/a 0.0015 %/a
Settling time 1.2 s 1.2 s 1.2 s 1.2 s 1.2 s 1.2 s
Interface update rate 23 /s 23 /s 23 /s 23 /s 23 /s 23 /s
Internal adjustment weights 3) 1 1 1 1 1 1
Balance dimensions (W x D x H) [mm] 194 x 366 x 96 194 x 366 x 96 194 x 366 x 96 194 x 366 x 96 194 x 366 x 96 194 x 366 x 96
Weighing pan dimensions (W x D) [mm] 170 x 205 170 x 205 170 x 205 170 x 205 170 x 205 170 x 205
Weight of balance [kg] 6.9 6.9 6.9 6.9 6.9 6.9
Typical data for determination of the measurement uncertainty
Model XS80S XS00S XS400S XS400SDR XS600S XS600SDR
Repeatability sd 4mg+0.00025%·Rgr 4mg+0.0001%·Rgr 4mg+0.00005%·Rgr 40mg+0.00025%·Rgr 4mg+0.00003%·Rgr 40mg+0.00015%·Rgr
Repeatability fine range sd – – – 40mg+0.00025%·Rgr – 40mg+0.00015%·Rgr
Differential linearity deviation sd √(1.5x10-5mg·Rnt) √(6x10-6mg·Rnt) √(3x10-6mg·Rnt) √(3x10-6mg·Rnt) √(2x10-6mg·Rnt) √(2x10-6mg·Rnt)
Differential eccentric load deviation sd 0.0003%·Rnt 0.00015%·Rnt 0.00015%·Rnt 0.00015%·Rnt 0.00015%·Rnt 0.00015%·Rnt
Sensitivity offset sd 0.002%·Rnt 0.0008%·Rnt 0.0004%·Rnt 0.0004%·Rnt 0.00025%·Rnt 0.00025%·Rnt
Minimum weight 4) (according to USP) 12g+0.75%·Rgr 12g+0.3%·Rgr 12g+0.15%·Rgr 120g+0.75%·Rgr 12g+0.09%·Rgr 120g+0.45%·Rgr
Minimum weight 4) (according to USP) fine range – – – 12g+0.75%·Rgr – 12g+0.45%·Rgr
Minimum weight 4) (@ U=1%, 2 sd) 800mg+0.05%·Rgr 800mg+0.02%·Rgr 800mg+0.01%·Rgr 8g+0.05%·Rgr 800mg+0.006%·Rgr 8g+0.03%·Rgr
Minimum weight 4) (@ U=1%, 2 sd) fine range – – – 0.8g+0.05%·Rgr – 0.8g+0.03%·Rgr
Rgr = Gross weightRnt = Net weight (sample weight)sd = Standard deviationa = Year (annum)1) In the temperature range 10…30 °C2) Sensitivity drift/year after putting into operation for the first time , with the FACT self-calibration function activated3) The adjustment weights of the XS precision balances are made from stainless antimagnetic chrome-nickel steel.
The masses of the adjustment weights are traceable to the prototype kilogram which is the standard unit of mass kept in Paris.4) The minimum weight can be improved by the following measures:
– Selecting suitable weighing parameters – Choosing a better location – Using smaller taring containers
Technical data
4
4..3 XS precision balances with readability 0.1 g, “S” platformTechnical data (limit values)
Model XS4001S XS6001S XS8001S
Maximum capacity 4.1 kg 6.1 kg 8.1 kg
Maximum capacity, fine range – – –
Readability 100 mg 100 mg 100 mg
Readability, fine range – – –
Taring range 0…4100 g 0…6100 g 0…8100 g
Repeatability (at nominal load) sd 80 mg 80 mg 80 mg
Repeatability fine range (at nominal load) sd – – –
Linearity deviation 60 mg 60 mg 100 mg
Eccentricity deviation (test load) 200 mg (2 kg) 200 mg (2 kg) 200 mg (5 kg)
Sensitivity offset (test load) 240 mg (4 kg) 240 mg (6 kg) 600 mg (8 kg)
Sensitivity temperature drift 1) 0.0015 %/°C 0.0015 %/°C 0.0015 %/°C
Sensitivity stability 2) 0.005 %/a 0.005 %/a 0.005 %/a
Settling time 0.8 s 0.8 s 1.0 s
Interface update rate 23 /s 23 /s 23 /s
Internal adjustment weights 3) 1 1 1
Balance dimensions (W x D x H) [mm] 194 x 366 x 96 194 x 366 x 96 194 x 66 x 96
Weighing pan dimensions (W x D) [mm] 190 x 223 190 x 223 190 x 223
Weight of balance [kg] 6.4 6.4 6.4
Typical data for determination of the measurement uncertainty
Model XS4001S XS6001S XS8001S
Repeatability sd 40mg+0.0005%·Rgr 40mg+0.0003%·Rgr 40mg+0.00025%·Rgr
Repeatability fine range sd – – –
Differential linearity deviation sd √(2.5×10-5g·Rnt) √(1.5×10-5g·Rnt) √(4x10-5mg·Rnt)
Differential eccentric load deviation sd 0.0008%·Rnt 0.0008%·Rnt 0.0003%·Rnt
Sensitivity offset sd 0.002%·Rnt 0.0012%·Rnt 0.002%·Rnt
Minimum weight 4) (according to USP) 120g+1.5%·Rgr 120g+0.9%·Rgr 120g+0.75%·Rgr
Minimum weight 4) (according to USP) fine range – – –
Minimum weight 4) (@ U=1%, 2 sd) 8g+0.1%·Rgr 8g+0.06%·Rgr 8g+0.05%·Rgr
Minimum weight 4) (@ U=1%, 2 sd) fine range – – –
Rgr = Gross weightRnt = Net weight (sample weight)sd = Standard deviationa = Year (annum)1) In the temperature range 10…30 °C2) Sensitivity drift/year after putting into operation for the first time , with the FACT self-calibration function activated3) The adjustment weights of the XS precision balances are made from stainless antimagnetic chrome-nickel steel.
The masses of the adjustment weights are traceable to the prototype kilogram which is the standard unit of mass kept in Paris.4) The minimum weight can be improved by the following measures:
– Selecting suitable weighing parameters – Choosing a better location – Using smaller taring containers
Technical data
5
4..4 XS precision balances with readability 0.1 g / 1 g, “M” platformTechnical data (limit values)
Model XS6001M XS6001MDR XS10001M XS1001MDR XS16001M
Maximum capacity 6.1 kg 6.1 kg 10.1 kg 12.1 kg 16.1 kg
Maximum capacity, fine range – 1.2 kg – 2.4 kg –
Readability 0.1 g 1 g 0.1 g 1 g 0.1 g
Readability, fine range – 0.1 g – 0.1 g –
Taring range 0…6100 g 0…6100 g 0…10100 g 0…12100 g 0…16100 g
Repeatability (at nominal load) sd 0.08 g 0.6 g 0.08 g 0.6 g 0.08 g
Repeatability fine range (at nominal load) sd – 0.08 g – 0.08 g –
Linearity deviation 0.06 g 0.6 g 0.1 g 0.6 g 0.2 g
Eccentricity deviation (test load) 0.2 g (2 kg) 1 g (2 kg) 0.2 g (5 kg) 1 g (5 kg) 0.2 g (5 kg)
Sensitivity offset (test load) 0.24 g (6 kg) 0.3 g (6 kg) 0.5 g (10 kg) 0.6 g (12 kg) 0.8 g (16 kg)
Sensitivity temperature drift 1) 0.0015 %/°C 0.0015 %/°C 0.0015 %/°C 0.0015 %/°C 0.0015 %/°C
Sensitivity stability 2) 0.005 %/a 0.005 %/a 0.005 %/a 0.005 %/a 0.005 %/a
Settling time 1 s 1 s 1.2 s 1 s 1 s
Interface update rate 23 /s 23 /s 23 /s 23 /s 23 /s
Internal adjustment weights 3) 1 1 1 1 1
Balance dimensions (W x D x H) [mm] 240 x 393 x 110 240 x 393 x 110 240 x 393 x 110 240 x 393 x 110 240 x 393 x 110
Weighing pan dimensions (W x D) [mm] 237 x 237 237 x 237 237 x 237 237 x 237 237 x 237
Weight of balance [kg] 8 8 8 8 9.5
Typical data for determination of the measurement uncertainty
Model XS6001M XS6001MDR XS10001M XS1001MDR XS16001M
Repeatability sd 0.04g+0.0003%·Rgr 0.4g+0.0015%·Rgr 0.04g+0.0002%·Rgr 0.4g+0.0008%·Rgr 0.04g+0.00012%·Rgr
Repeatability fine range sd – 0.04g+0.0015%·Rgr – 0.04g+0.0008%·Rgr –
Differential linearity deviation sd √(1.5×10-8g·Rnt) √(1.5×10-8g·Rnt) √(3×10-8g·Rnt) √(2.5×10-8g·Rnt) √(2.5×10-7g·Rnt)
Differential eccentric load deviation sd 0.0008%·Rnt 0.0008%·Rnt 0.0003%·Rnt 0.0003%·Rnt 0.0012%·Rnt
Sensitivity offset sd 0.0015%·Rnt 0.0015%·Rnt 0.0015%·Rnt 0.0012%·Rnt 0.0008%·Rnt
Minimum weight 4) (according to USP) 120g+0.9%·Rgr 1200g+4.5%·Rgr 120g+0.6%·Rgr 1200g+2.4%·Rgr 120g+0.36%·Rgr
Minimum weight 4) (according to USP) fine range – 120g+4.5%·Rgr – 120g+2.4%·Rgr –
Minimum weight 4) (@ U=1%, 2 sd) 8g+0.06%·Rgr 80g+0.3%·Rgr 8g+0.04%·Rgr 80g+0.16%·Rgr 8g+0.024%·Rgr
Minimum weight 4) (@ U=1%, 2 sd) fine range – 8g+0.3%·Rgr – 8g+0.16%·Rgr –
Rgr = Gross weightRnt = Net weight (sample weight)sd = Standard deviationa = Year (annum)1) In the temperature range 10…30 °C2) Sensitivity drift/year after putting into operation for the first time, with the FACT self-calibration function activated3) The adjustment weights of the XS precision balances are made from stainless antimagnetic chrome-nickel steel.
The masses of the adjustment weights are traceable to the prototype kilogram which is the standard unit of mass kept in Paris.4) The minimum weight can be improved by the following measures:
– Selecting suitable weighing parameters – Choosing a better location – Using smaller taring containers
Technical data
6
Technical data (limit values)
Model XS10000M * XS16000M *
Maximum capacity 10.1 kg 16.1 kg
Maximum capacity, fine range – –
Readability 1 g 1 g
Readability, fine range – –
Taring range 0…10100 g 0…16100 g
Repeatability (at nominal load) sd 0.6 g 0.6 g
Repeatability fine range (at nominal load) sd – –
Linearity deviation 0.6 g 0.6 g
Eccentricity deviation (test load) 1 g (5 kg) 1 g (5 kg)
Sensitivity offset (test load) 0.5 g (10 kg) 0.8 g (16 kg)
Sensitivity temperature drift 1) 0.0015 %/°C 0.0015 %/°C
Sensitivity stability 2) 0.005 %/a 0.005 %/a
Settling time 1 s 1 s
Interface update rate 23 /s 23 /s
Internal adjustment weights 3) 1 1
Balance dimensions (W x D x H) [mm] 240 x 393 x 110 240 x 393 x 110
Weighing pan dimensions (W x D) [mm] 237 x 237 237 x 237
Weight of balance [kg] 8 9.5
Typical data for determination of the measurement uncertainty
Model XS10000M * XS16000M *
Repeatability sd 0.4g+0.001%·Rgr 0.4g+0.0006%·Rgr
Repeatability fine range sd – –
Differential linearity deviation sd √(3×10-8g·Rnt) √(2.5×10-6g·Rnt)
Differential eccentric load deviation sd 0.0003%·Rnt 0.006%·Rnt
Sensitivity offset sd 0.0015%·Rnt 0.0008%·Rnt
Minimum weight 4) (according to USP) 1200g+3%·Rgr 1200g+1.8%·Rgr
Minimum weight 4) (according to USP) fine range – –
Minimum weight 4) (@ U=1%, 2 sd) 80g+0.2%·Rgr 80g+0.12%·Rgr
Minimum weight 4) (@ U=1%, 2 sd) fine range – –
Rgr = Gross weightRnt = Net weight (sample weight)sd = Standard deviationa = Year (annum)1) In the temperature range 10…30 °C2) Sensitivity drift/year after putting into operation for the first time , with the FACT self-calibration function activated3) The adjustment weights of the XS precision balances are made from stainless antimagnetic chrome-nickel steel.
The masses of the adjustment weights are traceable to the prototype kilogram which is the standard unit of mass kept in Paris.4) The minimum weight can be improved by the following measures:
– Selecting suitable weighing parameters – Choosing a better location – Using smaller taring containers
* no certified models available
Technical data
7
4..5 XS precision balances with readability of 0.1 g / 1 g, “L” platformTechnical data (limit values)
Model XS8001L XS16001L XS3001L XS3001LDR XS16000L XS3000L
Maximum capacity 8.1 kg 16.1 kg 32.1 kg 32.1 kg 16.1 kg 32.1 kg
Maximum capacity, fine range – – – 6400 g – –
Readability 0.1 g 0.1 g 0.1 g 1 g 1 g 1 g
Readability, fine range – – – 0.1 g – –
Taring range 0…8100 g 0…16100 g 0…32100 g 0…32100 g 0…16100 g 0…32100 g
Repeatability (at nominal load) sd 0.08 g 0.08 g 0.08 g 0.6 g 0.6 g 0.6 g
Repeatability fine range (at nominal load) sd – – – 0.1 g – –
Linearity deviation 0.2 g 0.2 g 0.3 g 0.3 g 0.6 g 0.6 g
Eccentricity deviation (test load) 0.3 g (5 kg) 0.3 g (5 kg) 0.3 g (10 kg) 1 g (10 kg) 1 g (5 kg) 1 g (10 kg)
Sensitivity offset (test load) 0.64 g (8 kg) 0.8 g (16 kg) 0.96 g (32 kg) 0.96 g (32 kg) 1.28 g (16 kg) 1.92 g (32 kg)
Sensitivity temperature drift 1) 0.0015 %/°C 0.0015 %/°C 0.001 %/°C 0.001 %/°C 0.0015 %/°C 0.0015 %/°C
Sensitivity stability 2) 0.005 %/a 0.005 %/a 0.003 %/a 0.003 %/a 0.005 %/a 0.005 %/a
Settling time 1.5 s 1.5 s 1.5 s 1.5 s 1.2 s 1.2 s
Interface update rate 23 /s 23 /s 23 /s 23 /s 23 /s 23 /s
Internal adjustment weights 3) 2 2 2 2 2 2
Weighing balance dimensions (W x D) [mm]• Terminal attached to the long side• Terminal attached to the short side
360 x 404 x 130280 x 484 x 130
360 x 404 x 130280 x 484 x 130
360 x 404x 130280 x 484 x 130
360 x 404 x 130280 x 484 x 130
360 x 404 x 130280 x 484 x 130
360 x 404 x 130280 x 484 x 130
Weighing platform dimensions (W x D) [mm] 280 x 360 x 130 280 x 360 x 130 280 x 360 x 130 280 x 360 x 130 280 x 360 x 130 280 x 360 x 130
Weighing pan dimensions (W x D) [mm] 280 x 360 280 x 360 280 x 360 280 x 360 280 x 360 280 x 360
Weight of balance [kg] 12.4 12.4 12.4 12.4 12.4 12.4
Typical data for determination of the measurement uncertainty
Model XS8001L XS16001L XS3001L XS3001LDR XS16000L XS3000L
Repeatability sd 0.04g+0.00025%·Rgr 0.04g+0.00012%·Rgr 0.04g+0.00006%·Rgr 0.4g+0.0003%·Rgr 0.4g+0.0006%·Rgr 0.4g+0.0003%·Rgr
Repeatability fine range sd – – – – 0.04g+0.0003%·Rgr –
Differential linearity deviation sd √(5x10-7g·Rnt) √(2.5x10-7g·Rnt) √(3x10-7g·Rnt) √(3x10-7g·Rnt) √(2.5x10-6g·Rnt) √(1.2x10-6g·Rnt)
Differential eccentric load deviation sd 0.002%·Rnt 0.002%·Rnt 0.001%·Rnt 0.003%·Rnt 0.006%·Rnt 0.003%·Rnt
Sensitivity offset sd 0.0012%·Rnt 0.0008%·Rnt 0.0005%·Rnt 0.0005%·Rnt 0.0012%·Rnt 0.001%·Rnt
Minimum weight 4) (according to USP) 120g+0.75%·Rgr 120g+0.36%·Rgr 120g+0.18%·Rgr 1200g+0.9%·Rgr 1200g+1.8%·Rgr 1200g+0.9%·Rgr
Minimum weight 4) (according to USP) fine range – – – 120g+0.9%·Rgr – –
Minimum weight 4) (@ U=1%, 2 sd) 8g+0.05%·Rgr 8g+0.024%·Rgr 8g+0.012%·Rgr 80g+0.06%·Rgr 80g+0.12%·Rgr 80g+0.06%·Rgr
Minimum weight 4) (@ U=1%, 2 sd) fine range – – – 8g+0.06%·Rgr –
Rgr = Gross weightRnt = Net weight (sample weight)sd = Standard deviationa = Year (annum)1) In the temperature range 10…30 °C2) Sensitivity drift/year after putting into operation for the first time , with the FACT self-calibration function activated3) The adjustment weights of the XS precision balances are made from stainless antimagnetic chrome-nickel steel.
The masses of the adjustment weights are traceable to the prototype kilogram which is the standard unit of mass kept in Paris.4) The minimum weight can be improved by the following measures:
– Selecting suitable weighing parameters – Choosing a better location – Using smaller taring containers
Technical data
8
4..6 Procedure for certified balancesPrefaceCertified balances are subject to the national, legal requirements of “non-automatic balances”.
Switching on the balance • Switching on
• Immediately after being switched on, the balance displays 0.000.. g on.• The balance is always started up with the “Factory setting” unit.
• Switch-on range• A maximum 20 % of the type load, otherwise overload is displayed (OIML R76 4.5.1).
• Stored value as switch-on zero point• It is not permissible to use a stored value as a switch-on zero point; the MT-SICS M35 command is not available (OIML R76
T.5.2).
Display • Display of the weight value
• The “e” certification value is always shown in the display and is specified at the model designation plate (OIML R76 T.3.2.3 and 7.1.4).
• If the display increment is lower than the “e” certification value, this is variably displayed for the net, gross and weighed tare. (Graying of the digits or certification brackets) (OIML R76 T.2.5.4 and 3.4.1).
• In accordance with guidelines, the tested display increment (certification value) is never lower than 1 mg (OIML R76 T.3.4.2).
• At balances with d = 0.1 mg, the digits below 1 mg are displayed in gray. These digits in brackets are printed. In accordance with legal metrology requirements, this illustration does not affect the accuracy of the weighing results.
• Units of measurement• The display and info unit are firmly set to g or mg (depending on the model).• The following applies for the “Custom unit”: • no certification brackets. • The following names are blocked, this applies to upper and lower case letters. - all official units (g, kg, ct etc.). - c, ca, car, cm, crt, cart, kt, gr, gra, gram, grm, k, kilo, to, ton. - all names with “o” which can be replaced by a zero (0z, 0zt etc.).
• Identification of the weight display• Gross, net, tare and other weight values are accordingly marked (OIML R76 4.6.5). • Net for net when a tare value has been used. • B or G for gross. • T for the weighed tare. • PT for the specified tare. • * or diff for the difference between the net or gross.
• Info field• The info weight value is handled metrologically in the same way as the weight value in the main display.
Technical data
9
Printout (OIML R76 4.6.11)
• If a tare value is entered manually (PreTare), the PreTare value is always printed along with the net value (PT 123.45 g).• The printed weight values are identified in the same way as the weight value on the display. I.e. N, B or G, T, PT, diff or *, with differentiation.
Example: Single-range balance. N 123.4[5] g PT 10.00 g for PreTare G 133.4[5] g
DR balance with 100.00 g fine range. N 80.4[0] g T 22.5[6] g for weighed tare G 102.9[ ] g
Balance functions • Reset to zero
• The zero range is limited to a maximum of ± 2 % of the full load (OIML R76 4.5.1).
• Tare• No negative tare values are permitted.• Tare immediate (TI) is not permitted, the MT-SICS TI command is not available (OIML R76 4.6.4).
• 1/xd• e = d The 1/xd switchover is not permitted (OIML R76 3.1.2).• e = 10d This is only permitted in the case of the 1/10d switchover.• e = 100d Only the 1/10d and 1/100d switchover are permitted.
Technical data
30
4.3 Dimensions
4.3.1 XS precision balances with readability 1 mg, “S” platform with draft shield
Models: XS203SXS403SXS603SXS603SDRXS1003S
127
156
176
194
82
251
182
72
197128
115
366
178
58
77 95
175
276
127
257
Technical data
31
4.3. XS precision balances with readability 10 mg, “S” platform with draft shield element
Models: XS802SXS2002SXS4002SXS4002SDRXS6002SXS6002DR
170
156
194
257
226
72
22197128
115
366
178
263
168
58
77 88 96
205
251
25
Technical data
3
4.3.3 XS precision balances with readability 0.1 g, “S” platform
Models: XS4001SXS6001SXS8001S
190
156
194
226
72
22197128
115
366
178
263
168
58
77
96
223
257
251
25
Technical data
33
4.3.4 XS precision balances with readability 0.1 g / 1 g, “M” platform
Models: XS6001MXS6001MDRXS10001MXS12001MDRXS10000M
214
77.8
178
58
77
110
202
240
278
393
237
206.5135 3423
7
115
309
32
Technical data
34
Models: XS16001MXS16000M
214
33
178
58
77
110
202
240
278
393
237
206.5135 3423
7
115
39
309
32
Technical data
35
4.3.5 Dimensions of XS precision balances with “L” weighing platform
280124
410
296
194 15
360
68
130
46
216156
124
77
174
Models:XS8001LXS16001LXS32001LXS32001LDRXS16000LXS32000L
Technical data
36
Connection contact
Do not connect!
∅ 3
.5 m
m
GND
4.4 SpecificationsoftheRS232Cinterface
Interface type: Voltage interface according to EIA RS-232C/DIN 66020 (CCITT V24/V.28)
Max. cable length: 15 m
Signal level: Outputs: Inputs:
+5 V ... +15 V (RL = 3 – 7 kΩ) +3 V ... 25 V
–5 V ... –15 V (RL = 3 – 7 kΩ) –3 V ... 25 V
Connector: Sub-D, 9-pole, female
Operating mode: Full duplex
Transmission mode: Bit-serial, asynchronous
Transmission code: ASCII
Baud rates: 600, 1200, 2400, 4800, 9600, 19200, 384001) (firmware selectable)
Bits/parity: 7-bit/even, 7-bit/odd, 7-bit/none, 8-bit/none (firmware selectable)
Stop bits: 1 stop bit
Handshake: None, XON/XOFF, RTS/CTS (firmware selectable)
End-of-line: <CR><LF>, <CR>, <LF> (firmware selectable)
6
15
9
DataGND
Handshake
Pin 2: Balance transmit line (TxD)
Pin 3: Balance receive line (RxD))
Pin 5: Ground signal (GND)
Pin 7: Clear to send (hardware handshake) (CTS)
Pin 8: Request to send (hardware handshake) (RTS)
1) 38400 baud is only possible in special cases, such as:
• Weighing platform without terminal, or
• Weighing platform with terminal, only via the optional RS232C interface.
4.5 Specificationofthe“Aux”connectionsYou can connect the METTLER TOLEDO “ErgoSens” or an external switch to sockets Aux 1 and Aux 2. This allows you to start functions such as taring, zeroing, printing and others.
Externalconnection:
Connector: 3.5 mm stereo jack connector
Electrical data: Max. voltage 12 V Max. current 150 mA
Technical data
37
4.6 MT-SICS Interface commands and functionsMany of the balances and scales used have to be capable of integration in a complex computer or data acquisition system.
To enable you to integrate balances in your system in a simple manner and utilize their capabilities to the full, most balance functions are also available as appropriate commands via the data interface.
All new METTLER TOLEDO balances launched on the market support the standardized command set “METTLER TOLEDO Standard Interface Command Set” (MT-SICS). The commands available depend on the functionality of the balance.
Basic information on data interchange with the balanceThe balance receives commands from the system and acknowledges the command with an appropriate response.
Command formatsCommands sent to the balance comprise one or more characters of the ASCII character set. Here, the following must be noted:
• Enter commands only in uppercase.
• The possible parameters of the command must be separated from one another and from the command name by a space (ASCII 32 dec., in this description represented as /).
• The possible input for “text” is a sequence of characters of the 8-bit ASCII character set from 32 dec to 255 dec. Note: For language-specific characters, please see the information in the “Operating Instructions – Part 2”, section 3.6.
• Each command must be closed by CRLF (ASCII 13 dec., 10 dec.).
The characters CRLF, which can be inputted using the Enter or Return key of most entry keypads, are not listed in this description, but it is essential they be included for communication with the balance.
Example
S – Send stable weight valueCommand S Send the current stable net weight value.
Response S/S/WeightValue/Unit
Current stable weight value in unit actually set under unit 1.
S/I Command not executable (balance is currently executing another command, e.g. taring, or timeout as stability was not reached).
S/+ Balance in overload range.
S/- Balance in underload range.
ExampleCommand S Send a stable weight value.
Response S/S/////100.00/g The current, stable weight value is 100.00 g.
Technical data
38
The MT-SICS commands listed below is a selected list of available commands. For additional commands and further information please refer to the Reference Manual MT-SICS downloadable from the Internet under mt.com.
S – Send stable weight valueCommand S Send the current stable net weight value.
SI – Send value immediatelyCommand SI Send the current net weight value, irrespective of balance stability.
SIR – Send weight value immediately and repeatCommand SIR Send the net weight values repeatedly, irrespective of balance stability.
Z – ZeroCommand Z Zero the balance.
@ – ResetCommand @ Resets the balance to the condition found after switching on, but
without a zero setting being performed.
SR – Send weight value on weight change (Send and Repeat)Command SR Send the current stable weight value and then send continuously the stable weight
value after every weight change. The weight change must be at least 12.5 % of the last stable weight value, mini-mum = 30d.
ST – Send stable weight after pressing «F» keyCommand ST/1 Send the current stable net weight value each time when F is pressed.
SU – Send stable weight value with currently displayed unitCommand SU As the “S” command, but with the currently displayed unit.
Accessories and spare parts
39
5 Accessories and spare parts
5.1 Accessories
5.1.1 Accessories for all weighing platforms “S”, “M” and “L”You can increase the functionality of your balance with accessories from the METTLER TOLEDO range. The following options are avail-able:
Description Part No.
PrintersBT-P42 printer with wireless Bluetooth connection to balance 11132540
RS-P42 printer with RS232C connection to balance 00229265
RS-P25 compact printer RS232C (for Japanese, Chinese and Russian language) 12122627
RS-P26 compact printer RS232C 11124303
LC-P45 application printer with additional functions 00229119
Optional interfacesBT option: Interface Bluetooth, multipoint connection for up to 6 Bluetooth devices 11132530
BTS option: Interface Bluetooth, single-point connection 11132535
Ethernet option: Interface Ethernet for connection to Ethernet network 11132515
PS/ option: Interface for connecting commercial keyboards and barcode readers 11132520
RS3C option: Interface for connection of a printer (RS232C), computer or titrator 11132500
LocalCAN option: Interface for connection of up to 5 LC (LocalCAN) instruments 11132505
MiniMettler option: Interface MiniMettler, for connection to older (legacy) METTLER TOLEDO systems 11132510
USB – RS3 converter cable 11103691
e-Link IP65 EBO1: Ethernet connection to the e-link network with IP65 protection 11120003
Cables for RS3C InterfaceRS9 – RS9 (m/f): Connection cable for PC or printer RS232C, length = 1 m 11101051
RS9 – RS5 (m/f): Connection cable for PC (IBM XT or compatible), length = 2 m 11101052
RS9 – RS9 (m/m): Connection cable for devices with DB9 socket (f), length = 1 m 21250066
Cables for LocalCAN InterfaceLC – RS9: Cable for connecting a PC with RS232C, 9-pin (f), lenght = 2 m 00229065
LC – RS5: Cable for connecting a printer or PC with RS232C, 25-pin (m/f), lenght = 2 m 00229050
LC – RS open: Cable for connecting to a MT ComBus system, length = 4 m 21900640
LC – CL: Cable for connecting a device with METTLER TOLEDO CL interface (5-pin), length = 2 m 00229130
LC – LC03: Extension cable for LocalCAN, length = 0.3 m 00239270
LC – LC: Extension cable for LocalCAN, length = 2 m 00229115
LC – LC5: Extension cable for LocalCAN, length = 5 m 00229116
LC – LCT: Cable branch (T-connector) for LocalCAN 00229118
Cables for MiniMettler InterfaceMM – RS9f: RS232C connection cable to MiniMettler interface, length = 1.5 m 00229029
Terminal cableTerminal extension cable, length = 4.5 m 11600517
Accessories and spare parts
40
Description Part No.
Cable, one-sided open (-pin)Cable between balance and AC adapter, length = 4 m 11132037
Auxiliary displaysBT-BLD Bluetooth auxiliary display for table mounting, 168 mm, LCD display with backlighting 11132555
RS/LC-BLDS auxiliary display for table or balance mounting, 480 mm, LCD display with backlighting 11132630
RS/LC-BLD auxiliary display for table mounting, 168 mm, LCD display with backlighting 00224200
SensorsErgoSens, optical sensor for hands-free operation 11132601
LC-I/O boxRelay interface for control of up to 8 external instruments from the balance 21202217
LC-switchboxFor connection of up to 3 balances with LocalCAN interface to a printer 00229220
FootswitchesAuxiliary footswitch with selectable function for balances (Aux 1, Aux 2) 11106741
LC-FS foot switch with selectable function for balances with LocalCAN interface 00229060
Filling-process controlLV11 automatic feeder for automatic loading of small items on the balance 21900608
Draft shield door for “Pro” Draft shield with opening for LV11 11132711
SQC14 filling process controlCompact instrument with printer for control of up to 16 articles 00236210
Compact instrument with printer for control of up to 60 articles 00236211
Accessoriesandspareparts
41
Description Part No.
Universal anti-static kitUniversalanti-statickitcomplete(U-shaped),includingelectrodeandpowersupply 11107767
Optional:SecondU-electrode*foruniversalanti-statickit 11107764
Optional:Point-electrode*foruniversalanti-statickit(fordischargingsmallsamples) 11107765
* Powersupplyforoptional,secondU-elektrode(11107764), orforoptionalpoint-electrode(11107765)
11107766
Barcode readersRS232C barcode reader (without power supply and cables) 21901297
RS232C barcode reader – cordless (without power supply and cables) 21901299Thefollowingitemsneedsforoperation: Powersupply5V(for21901297) 21901311 Powersupply12V(for21901299) 21901312 RS232Fcable 21901305 Nullmodemadapter 21900924plus1ofthefollowing:cables PowercableEU* 21901313 PowercableUK* 21901314 PowercableUS* 21901315*accordingtoregionofuse PowercableAUS* 21901316Bluetooth barcode reader 21901298Oneofthefollowingneedsforoperation: PowercableEU* 21901313 PowercableUK* 21901314 PowercableUS* 21901315*accordingtoregionofuse PowercableAUS* 21901316PS/2 barcode reader 21901297Thefollowingitemsneedsforoperation: PS/2wedgesinglecable 21901307PS/2Y barcode reader 21901297
Thefollowingitemsneedsforoperation: PS/2wedgetwin(Y)cable 21901308
Anti-theft deviceSteelcord 11600361
SoftwareLabX balance,PCSoftwareforinstrumentcontrolanddatamanagement–LabXprobalance(upto30balancesconnectedtoanetwork) english german french
111203041112030511120306
–LabXlightbalance(singlebalance) english german french
111203071112030811120309
–Validationmanual1 11120332
–Validationmanual2 11120333
LabXdirectbalance,PCsoftwareforeasydatatransferinopenapplications 11120340
Freeweigh.Net 21900895
Production certificateProductionCertificate“PRO”forXSBalances 11106895
Accessories and spare parts
4
Description Part No. Platform “S”
Platform “M”
Platform “L”
Weighing panMPS (Magnetic Protection Shield) weighing pan for 0.1 g models 190 x 223 mm
11132625 x — —
MPS (Magnetic Protection Shield) weighing pan for 10 mg models 170 x 205 mm
11132626 x — —
Weighing pan 190 x 223 mm, incl. pan support 11132655 x — —
Weighing pan 170 x 205 mm, incl. pan support and draft shield element
11132660 x — —
Stands and wall mountingsTerminal stand for placement of the terminal 30 cm above the weighing pan, (“S” and “M” platform)
11132636 x x —
Terminal stand for placement of the terminal 30 cm above the weighing pan, (“L” platform)
11132653 — — x
Terminal wall mounting 11132665 x x x
Draft shields“Pro” Draft shield glass free for 1 mg models (food indus-try), usable height 248 mm
11131652 x — —
“Pro” Draft shield for 1 mg models, usable height 248 mm 11131651 x — —
“MagicCube” Draft shield for 1 mg models, usable height 175 mm
11131650 x — —
Draft shield 0.1 g* and 10 mg models, usable height 175 mm * for the 0.1 g model the weighing pan set “11132660” must be ordered additionally
11131653 x — —
Draft shield to cover the entire balance “MC W12” 300 x 450 x 450 mm (W x D x H)
11134430 x x —
Draft shield to cover the entire balance “MC W64” 550 x 470 x 580 mm (W x D x H)
11134470 — x x
Density determination kitKit for density determination of solids and liquids (for 1 mg and 0.1 mg models)
11132680 x — —
Sinker 10 ml: To density determination of solids and liquids 00210260 x — —
Sinker 10 ml: Calibrated, with certificate 00210672 x — —
Recalibration of your 10 ml sinker and new certificate 00210674 x — —
Calibrated thermometer: Certified model 11132685 x — —
Accessoriesandspareparts
43
Description Part No. Platform “S”
Platform “M”
Platform “L”
Weighing kit for dynamic weighingDynamicweighingkitfor0.1and10mgmodels,4litrebowlandcontactmat
11132657 x — —
IP54 AC adapter protectionIP54ACadapterprotection 11132550 x x —
Hook for weighing below the balanceHookforthehanger(XS16001MandXS16000Mmodelsand“L”platform)
11132565 — x x
Protective coversProtectivecoverforXSterminal(“S”and“M”platform) 11106870 x x —
ProtectivecoverforXSterminal(“L”platform) 11132573 — — x
Protectivecoverforweighingplatform“S”10mg/0.1gmodels(platformonly)
11133034 x — —
Protectivecoverforweighingplatform“M”,(platformonly) 11132574 — x —
ProtectivecoverforXSbalanceswith“S”platform10mg/0.1gmodels
11132571 x — —
ProtectivecoverforXSbalanceswith“M”platform 11132572 — x —
Transport casesTransportcaseforXSbalances,10mgand0.1gmodels“S”platform
11132595 x — —
Accessories and spare parts
44
5. Spare parts
Pos Description Part No.
1
2
Draft shield “Magic Cube”1 U-Glass 11133035
2 Side door 11133037
1
4
3
2
5
Weighing pansfor weighing platform “S”
1 1 mg Weighing pan 127 x 127 mm 11131022
2 10 mg Weighing pan 170 x 205 mm 11131030
3 10 mg Draft shield element 11131040
4 0.1 g Weighing pan 190 x 223 mm 11131031
for weighing platform “M”
2 Weighing pan 237 x 237 mm 11131173
for weighing platform “L”
2 Weighing pan 280 x 360 mm 00239105
Weighing pan support
4 from 10 mg for weighing platform “S” and “M” 11131029
4 for weighing platform “L” 00239104
Levelling foot
5 for weighing platform “S” and “M” 11106323
Accessoriesandspareparts
45
Pos Description Part No.
AC Adapter for weighing platform “S” and “M”1 ACAdapter(withoutpowercable) 11107909
2 PowercableCH 00087920
2 PowercableEU(Schuko) 00087925
2 PowercableUSA 00088668
2 PowercableIT 00087457
2 PowercableDK 00087452
2 PowercableGB 00089405
2 PowercableAUS 00088751
2 PowercableSA 00089782
TransportWeighing platform “S”, Type XSxx3S (1 mg)
1 Packagingcompl. 11133053
2 Exportcarton 11132834
Weighing platform “S”, Type XSxx2S (10 mg)
1 Packagingcompl. 11133050
2 Exportcarton 11132839
Weighing platform “S”, Type XSxx1S (0.1 g)
1 Packagingcompl. 11133051
2 Exportcarton 11132839
Weighing platform “M”, Type XSxxxM
1 Packagingcompl. 11133056
2 Exportcarton 11132879
Weighing platform “L”, Type XSxxxxL
1 Packagingcompl. 11133057
2 Exportcarton 11132912
Draft shield “MagicCube”
1 Packagingcompl. 11133049
2 Exportcarton 11132824
1
2
1
2
Index
46
6 Index
A“Aux” connections 36AC adapter 8, 16, 19, 20Accessories 8, 39
BBattery 18
CCertified balances 28Cleaning 18Cleaning agents 18
DDimensions 30Display area remains dark 16Disposal 8Draft shield door 14Draft shield glass 13
EEnvironmental conditions 19
FFeatures 7
GGLP 7Good Laboratory Practice 7
IInstalling the “Magic Cube” draft shield 11ISO 14001 7ISO 9001 7
LLevel indicator 15Leveling the balance 15Line voltages 16Local line voltage 16Location 15
MMaterials 19Model-specific data 22MT-SICS 37
OOptional interfaces 39
PPeripheral devices 8Placing the terminal on the “L” weighing platform 12Power supply 16, 19Power supply voltage 8Protection and standards 19Protection of the instrument 8
RRS232C interface 36
SSafety has priority 8Selecting the location 15Self-test 16Service 18Setting up 9Setting up the balance 11SOP 7Spare parts 44Standard equipment 10Standard Operating Procedure 7Symbols 7
TTechnical data 19Transporting the balance 16
UUnpacking the “Magic Cube” draft shield 9
WWeighing below the balance 17Weighing pan 11
Leer
Mettler-Toledo AGLaboratory & Weighing TechnologiesCH-8606 Greifensee, Switzerland
Subject to technical changes © Mettler-Toledo AG 2010 11781088 1003/2.12
To protect your METTLER TOLEDO product’s future: METTLER TOLEDO Service assures the quality, measuring accuracy and preservation of value of all METTLER TOLEDO products for years to come.
Please send for full details about our attractive terms of service. Thank you.
*11781088*www.mt.com
For more information
The global weighing guideline GWP® reduces risks associated with your weighing processes and helps to• choose the appropriate balance• reduce costs by optimizing testing procedures• comply with the most common regulatory requirements
www.mt.com/GWP
GWP®
Good Weighing Practice™