Download - MSI S425 (1022) Kurulum Rehberi
-
7/30/2019 MSI S425 (1022) Kurulum Rehberi
1/8
Installation Guide
Index
Overview
Step 1: Installing CPU
Step 2: Installing CPU Heat Sink
Step 3: Installing Notebook Memory
Step 4: Installing Mini PCI WLAN Card
Step 5: Installing Notebook Hard Drive (HDD)
Step 6: Installing the Battery
Step 7: Final Check
Step 8: Entering BIOS
p. 1
p. 3
p. 3
p. 6
p. 7
p. 8
p. 11
p. 11
p. 12
-
7/30/2019 MSI S425 (1022) Kurulum Rehberi
2/8
OverviewMS-1022 is shipped out as a bare bone. Some of the components are
equipped while some are not. This installation guide provides you with the
information of notebook hardware setup. Before assembling your Notebook,
please prepare for the installation tools and appropriate items. If you are not
clear about the items, please contact your dealer for more information.
Package check listOptional Hardware Devices:
HDD, Mini PCI WLAN card, CPU, Memory
Before you install your Notebook
Warning!
The peripheral devices contained herein depend on your actual system
configuration.
Third-party trademarks and names are the properties of their respective
owners.The information contained herein relevant to software and hardware are for
reference only and in accordance with actual system configuration. All
information are subject to change without notice.
Ensure power is turned off and Notebook Battery is removed before you
install any hardware devices.
Use a grounded wrist strap before handling computer components such as
CPU, Memory, HDD, mini-PCI Card, etc.
Place components (CPU, Memory, HDD, mini-PCI Card, etc) on a groundedantistatic pad or on the bed that came with the components whenever the
components are separated from the Notebook.
If there are any difficulties installing hardware devices, please contact your
dealer for further information.
Open View
1. Cover latch
2. Display Panel
3. Quick Launch Buttons and Power button
4. Status LEDs
5. Keyboard6. Touchpad
7. Stereo Speakers
Front View Rear View
Right View Left View
Bottom View1. CPU Compartment
2. Mini PCI Drive Compartment
3. Memory Compartment
4. Hard Disk Drive Compartment
5. Battery Unlock Button
6. Battery Pack
p. 1 p. 2
-
7/30/2019 MSI S425 (1022) Kurulum Rehberi
3/8
2-2 a.b.c.d. Assemble the Copper Heat Sink Pipe (B) to the CPU Heat Sink (A) by
placing the Copper Heat Sink Pipe sideways. Drop the Copper Heat Sink Pipe (B)
through the CPU Heat Sink (A). Turn the Copper Heat Sink Pipe sideways again
until it rest on the CPU Heat Sink. !! Be Careful. Do not use excessive force. Do
not bend Pipe or may cause damage to the CPU or the Notebook !!
2-3 Slide the Copper Heat Sink Pipe and CPU Head Sink over the CPU !! Be Sure that
there are no wire underneath the Heat Sink !!
2-4 a.b. Align the three screws with the screw holes next to the CPU. May need to
slide the Heat Sink to the side to align.
Step 1 : Installing CPU
1-1 Prepare a proper size flat head screw driver. Un-screw the screw until it can not
go any further
1-2 Locate the golden cut edge on the CPUs upper right-hand corner. Then insert the
CPU into the socket. !! The CPU will only fit in the coorect orientation !!
1-3 Adjust the CPU socket by turning the screw. Make sure the CPU is properly
installed. Then press the CPU evenly by hand and turn the screw using a flat head
screw driver to lock the CPU in place. !! Please make sure the golden cut edgelocation is aligned with the notch of the CPU socket. If the CPU does not align with
the CPU socket, it will damage the CPU !!
Step 2 : Installing CPU Heat Sink and Fan
2-1 Use the Heat Sink and Fan that is provided
p. 3 p. 4
a. b.
c. d.
A
A
B
B
B
A A
B
a. b.
-
7/30/2019 MSI S425 (1022) Kurulum Rehberi
4/8
2-8 a.b.c. Tighten the three screws that are provided.
Step 3 : Installing Notebook Memory
3-1Align the Memory Module to the DIMM socket 1. !! Memory module can only fit in
one direction due to the keyed notch. Wrong orientation will cause improper
installation and may damage the memory modules or DIMM sockets !!
3-2 Push down the memory module gently until the metal-locking levers aside from the
DIMM socket 1 is fastened.
3-3 If you have more than one memory module, please align the 2nd memory module
to the DIMM socket 2. Repeat steps 3-1 and 3-2. !! Memory module can only fit in
one direction due to the keyed notch. Wrong orientation will cause improperinstallation and may damage the memory modules or DIMM sockets !!
2-5 a.b.c. Tighten the three screws. !! Improper connection of the CPU Heat Sink will
damage the notebook and CPU !!
2-6 Plug the CPU fan connector before positioning the fan. !! Connect the wires
correctly. There is only one way to connect. DO NOT force in. !! Warning: Failure
to connect the fan may cause damage to the notebook and CPU !!
2-7 a.b. Gently slide the CPU fan into position until it drops into place. !! Be sure that
there are no wires underneath the CPU fan !!
p. 5 p. 6
a. b.
c.
a. b.
a. b.
c.
-
7/30/2019 MSI S425 (1022) Kurulum Rehberi
5/8
4-5 a.b.c.d.e. After installing the CPU, Memory, and Mini PCI Card, gently slide the
cover until it locks into position. Lock down the cover by applying 4 screws.
Step 5 : Installing Notebook Hard Drive (HDD)
5-1 Please use the given HDD shielding tray. !! Hard Drive may not be included !!
Step 4 : Installing Mini PCI WLAN Card
4-1Align the Mini PCI Card to the Mini PCI socket.
4-2Adjust the attached antennas and push down the Mini PCI Card gently until the
metal locking levers aside from the Mini PCI socket is fastened. !! Mini PCI Card
can only fit in one direction due to the keyed notch. Wrong orientation will cause
improper installation and may damage the Mini PCI Card or Mini PCI socket !!
4-3 Connect the black wire to the main connector.
4-4After connecting the black wire, connect the gray wire to the AUX connector.
p. 7 p. 8
a. b.
c.
e.
d.
-
7/30/2019 MSI S425 (1022) Kurulum Rehberi
6/8
5-4 a.b. After installing the shield, slide the HDD into the HDD bay. !! Be sure to have
HDD plastic puller face up !!
5-5 Gently push the HDD towards the side until HDD can go no further. !! Make sure to
align the HDD pins and its connector before HDD is secured down !!
5-6 Push HDD down into the HDD bay.
5-7 a.b. After installing the HDD, slide the cover then gently press down. Lock down
the cover by applying 2 screws. !! Failure to apply 2 scres may cause HDD
assembly to fall off in notebook HDD area and will damage the notebook and
HDD !!
5-2 Insert the HDD into the given HDD shielding tray. !! Improper alignment will cause
damage to the notebook and HDD !!
5-3 a.b.c.d.e. After inserting the shield over the HDD, fasten the screw that are
provided.
p. 9 p. 10
a. b.
c.
e.
d.
a. b.
a. b.
-
7/30/2019 MSI S425 (1022) Kurulum Rehberi
7/8
Step 8 : Entering BIOS
Before powering on the notebook, plug in notebook power adapter into the notebook.
After pressing the power button, press immediately which will take you to the
BIOS CMOS Setup Screen.
8-1Adjust proper TIME by pressing . Use or to configure SystemTime.
8-2 Under BOOT menu in the BIOS Setup Utility, press to select the first
boot device.
Step 6 : Installing the Battery
6-1 a.b.c. Align battery to the battery slot and push down teh battery gently. Hint: If
you wish to remove the battery, make sure the battery locking mechanism is in
Unlock position.
Step 7 : Final Check
7-1 Check all steps and make sure to fasten all the components and screws before
powering on your notebook. !! Improper installtion of any device(s) adn loosenscrews may damage teh notebook after powering on teh notebook !!Hint: If you
are unable to power on your notebook after following the above procedures, or if
there are any other issues, please contact your local retailer or national distributor
for help.
p. 11 p. 12
a. b.
c.
-
7/30/2019 MSI S425 (1022) Kurulum Rehberi
8/8
8-3 Insert a Bootable OS CD into the OSD tray.
8-4 To save/exit the BIOS Setup Screen, press Y to save/exit.
8-5 After seeing the Intel Logo, immediately press Enter in order to install OS and
follow the given setup messages.
8-6 After installing OS, insert the given Driver CD to install the appropriate drivers in
order. Hint: If you have any questions related to the BIOS Setup procedure or if
there are any other issues, please contact your local retailers or nationaldistributors for further support.
p. 13