Download - Mpo brochure 150324a
MPO Cables in Data Center
MITS Component & System Corp.Tel : +886-2-66215899 E-mail: [email protected]
Our Experience in Data Center
MITS Component & System Corp.Tel : +886-2-66215899 E-mail: [email protected]
The System in Data Center
Due to the IT rapids implement, the new Data Center
standard speed will migrate from 10Gb to 40Gb/100Gb.
Our solution in Data Center :
� Using the solution with plug-n-play, high density,
expandable and Pre-terminated cable system. Also
modulate to have system management and pre-
terminated parts that reduce the installation time and
give the Data Center more flexible to migrate to high
speed, or adding/changing the cable system.
� We are using the low loss connectors and bend insensitive
fibers (bending radius < 7.5mm). This gives trucking
cable with smaller loss and bending capability. It can fulfill
the <79ns delay spec. & link attenuation for 40G/100G
transmission.
MITS Component & System Corp.Tel : +886-2-66215899 E-mail: [email protected]
MPO Truck CableMPO-MPO Truck Cables are good for the quick cabling between
Data Center and optical infrastructure. Interfacing between the
MDA (Main Distribution Area), HDA (Horizontal Distribution
Area), & EDA (Equipment Distribution Area) with plug-n-play
structure gives the lower maintain cost and initial installation
cost.
Product Series : • 40G/100G SR4 MPO Trunk cable
• 120G/100G CXP/SR10 MPO Trunk Cable
MPO Break-out CableMPO-LC Break-out cable means one side is MPO 12/24
connector, the other side is Duplex LC type connector. Most
of cases is using this kind of cable to connect the core side
to the system side directly. Also it can used for system
expansion.
Product Series : • 40G/100G QSFP-LC MPO Cable
• 120G/100G SR-10/CXP to LC optical Cable
• 120G CXP to QSFP MPO Cables
MITS Component & System Corp.Tel : +886-2-66215899 E-mail: [email protected]
MPO Cassette Module
The MPO/MTP Cassette modules
provide the interface between the
MPO/MTP on the trunk and the LC
duplex and jumpers and that will then
connect directly into the electronics.
MPO Cassette Management Panels
The rack-mounted patch panel is designed to manage and
house easy-plug MPO to LC fiber cassette modules. For
connecting plug-and-play pre-terminated high density MPO
Fiber cabling system. Our solution contributes to greater
network availability that especially suitable for SAN, LAN and
Data Center applications, Like MDA, IDA & HAD. Each easy-
plug MPO to LC cassette is accommodated with a 12/24-fiber
MPO based fiber assemblies, and pre-loaded with LC adapters
in different fiber modes for your choices.
MITS Component & System Corp.Tel : +886-2-66215899 E-mail: [email protected]
LC Duplex Uniboot Optical Harness
Cable
A unique dual-core standard duplex patchcore integrated one-
tailed jacket and duplex LC connector (uniboot optical harness
cable). It is using the miniaturized a single tube 3.0mm round
cable. Using this bend-insensitive fiber which with superior
bending properties. Compared with the conventional LC
duplex patchcore, our LC patchcore is reducing cabling
space/cable congestion, improve cabling management/
installation efficiency and also to improved air circulation for
the equipment.
Features/Benefits:
• Duplex uniboot optical harness
cable is using a unique
miniaturized round two-core
cable• Let the connectors easier for the installation and
maintenance in high density Data Center application.
• Low Insertion loss and high Return loss
• Using the bend-insensitive multimode/Single mode fiber
which design for small bend radius fiber cabling installation
environment
MITS Component & System Corp.Tel : +886-2-66215899 E-mail: [email protected]