Download - Mini Circular Saw La The
Transcript
![Page 1: Mini Circular Saw La The](https://reader036.vdocuments.us/reader036/viewer/2022081821/55cf9993550346d0339e174e/html5/thumbnails/1.jpg)
Mini Circular Saw/Lathe
From an original contribution by Hubert Sicard (Bosco) at Model Ship World
The saw blade is normally held by a blade holder (approximately $50.00) which is useless to buy. To hold this blade on an axis, notch a little the opening of the center of the blade, then tighten the blade on its axis of support after having applied epoxy on the center of the blade.
![Page 2: Mini Circular Saw La The](https://reader036.vdocuments.us/reader036/viewer/2022081821/55cf9993550346d0339e174e/html5/thumbnails/2.jpg)
![Page 3: Mini Circular Saw La The](https://reader036.vdocuments.us/reader036/viewer/2022081821/55cf9993550346d0339e174e/html5/thumbnails/3.jpg)
I have no plans for this multi-jig. But I can give you the sections of woods used: - Main and other frames: 2 x 4 " - Secondary woods: 3/4 x 3/4 " - Positioning axes: 1/2 x 1/2 " - Rails for "sledges": 3/8 x 3/16 " Here are pictures taken with the first version of the jig. They show the groove for the positioning axes.