MicroscopeAccessories
Focus Drives 4
LEDrive | Microscope Carrier Economy 6 - 7
Lighting 8 - 9
Stands 10 - 15
Stages 16
Oblique View Module 17
Tilting Tables 18 - 19
Jointed Coupler | Microscope Accessories 20 - 21
Targets | Add Ons 22 - 23
Overview Chart 24 - 26
Content
A stable stand is indispensible!
When purchasing a microscope, there is another factor alongside image quality and resolution that should be carefully considered - the integrity of the mechanical mounting and the associated user experience. If the mechanism is not stable, any slight vibration of the table, or touching of the camera may be sufficient to alter the image or the focus.
Furthermore, with todays users often using micro-scopes for prolonged periods, ergonomics and user comfort have never been more important.
Here at Opto, we have been specialising in designing and manufacturing high quality, universal microscope mechanics and ergonomic accessories specifically for microscope users for over 30 years.
With German quality included ‚as standard‘, our products enable users to achieve a high performance microscope setup that is comfortable in use, versatile in application, and with mechanics that will last for many years.
Focus Drives
Focus drives are devices that enable optical devices to be effortlessly moved up and down with precision via a hand wheel. Coaxial drive knobs make the combine coarse and fine focus operations on one knob. Fine drives enable accurate positioning at high magnifications, whereas coarse drives enable rapid refocusing when required.
100-FB-OP Focus Drive OP - Coarse | Fine
Heavy duty with better than 1μm resolution and repeatabilitythrough 50 mm travel. Scale on knob with 100 sections.
Load 20 kg (adjustable to 50 kg) Dimensions 75 x 192,5 x 145 mm Travel range Fine 50 mm Coarse 50 mm Travel per knob rotation Fine 0.1 mm Coarse 4 mm
043-610022 Focus Drive OC - Coarse | Fine
For objectives with magnification up to 50x. One combined focus drive for coarse and fine alignment. Scale on knob with 100 sections.
Load 15 kg Dimensions 50 x 99 x 125 mm Travel range Fine 0.24 mm Coarse 80 mm Travel per knob rotation Coarse 2.9 mm
043-610004 Focus Drive C - Coarse
Focus Drive C with wide range of use, based onadaption to multiple columns and microscope carriers.
Load 10 kg Dimensions 51 x 129 x 105 mm Travel range Coarse 57 mm Travel per knob rotation Coarse 21 mm
4 5
043-643041 Focus Drive C - coarse with 5/8“
043-610004 Focus Drive C - coarse
050-502076126W12 LED-ring-light incl. clamp Ø 76 mm white 12 V
043-610920 Microscope Carrier - Ø 76 mm to Focus Drive C
043-610914 Clamp mini - Ø 35 mm for Focus Drive C
043-610904-002 Adapter plate to Focus Drive OC and C
043-610904-320-068 Clamp - Ø 32 mm to Focus Drive C
Focus Drive C - Accessories
Easy mounting of stereo microscopes and other options enable versatility to any inspection application.
043-643045 LEDrive - 5/8“
• 5/8“pinmountinginterface• IntegratedLEDringlight• MicroscopecarrierØ76mm• Horizontalextension204mm• JSTconnector2-pin
043-643047 LEDrive - 32 mm
• Ø32mmstandinterface• IntegratedLEDringlight• MicroscopecarrierØ76mm• Horizontalextension169mm• JSTconnector2-pin
050-70011220 TV Power Supply
• JSTconnector2-pin• Voltagelimited• Powerinput100Vto240V• Poweroutput12Vtomax.25W• 3-coreIECconnector
LEDrive
Key Features
• 57mmtravelwithFocusDriveC• 10kgmaximumload• Integratedringlightwithuniformillumination• LEDcolorwhiteapprox.6800K• 22500lxatworkingdistance245mm• 61000lxatworkingdistance110mm
Our latest ‚LEDrive‘ version features an integrated LED ringlight, enabling OEMs such as SMT wire bond and other PCB assembly machine manufacturers with a high quality ‚all-in-one‘ mounting option at a competitive price.
6 7
Microscope Carrier Economy
043-643046 Focus Drive C - 5/8“
• 5/8“pinmountinginterface• MicroscopecarrierØ76mm• Horizontalextension206mm• M6x1threadsforjointedcouplerattachment (see page 20)
043-643048 Focus Drive C - 32 mm
• Ø32mmstandinterface• MicroscopecarrierØ76mm• Horizontalextension171mm• M6x1threadsforjointedcouplerattachment (see page 20)
043-643045 LEDrive - 5/8“
043-643047 LEDrive - 32 mm
043-643046 Focus Drive C - 5/8“
043-643048 Focus Drive C - 32 mm
050-70011220TV Power Supply
Our new Eco range of microscope carriers are designed to combine the benefits of a low cost OEM style focusing device with the quality compa-rable to the big microscope brands. With the Eco range products, you have the best of both worlds – the performance, look and feel of a premium, high end focusing device, but at a competitive price!
Lighting
Our range of long working distance ring lights have been designed to deliver optimised illumination that enhances the inspection of objects with a video or stereo microscope system.
050-502076126W12 LEDRingLightincl.clampØ76mm
Diameter outer 125.6 mm | inner 76 mmWorking distance 110 mm - 245 mmNumberofLEDs 108in3ringsIlluminance 22500 lx at working distance 245 mm 61000 lx at working distance 110 mmLEDcolor whiteapprox.6800KHeight | Weight 47 mm | 660 g
050-70011220TV Power Supply
• JSTconnector2-pin• Voltagelimited• Powerinput100Vto240V• Poweroutput12Vtomax.25W• 3-coreIECconnector
045-500084 LEDRingLightØ35mm,white
Diameter outer 90 mm | inner 35 mmWorking distance 35 mm - 230 mmNumberofLEDs 128in4rings
Illuminance 60000 lx at working distance 35 - 42 mmLEDcolor whiteapprox.6800KHeight | Weight 47 mm | 220 g
043-700020 Power Supply
• Binderconnector5-pin• Currentlimited• Powerinput115Vto230VAC• Poweroutput0mAto350mA(2Vto12V)• Nopowercordincluded,2-coreIECconnector
8 9
100-SP-H-W HomogeneousLEDSpot,white 4000K100-SP-H-R HomogeneousLEDSpot,red 625nm100-SP-H-G HomogeneousLEDSpot,green 525nm100-SP-H-B HomogeneousLEDSpot,blue 460nm
Theseuniquespotsuseabeamhomogenizerbasedonchirpedmicrolens technology to generate extremely homogeneous and sharplydelimited spot illumination.
For image processing in time-critical applications this feature can eliminate the need for additional shading correction. They are available in white, red, green and blue and have a working distance from 200 mm (80 mm Spot) to 300 mm (110 mm Spot).
• Binderconnector5-pin• Cablelength3m
Easypositioningcanbeachievedusingourjointedcouplers.
043-502253-W CoaxialLED-illumination,white4000k(3000K)
• Binderconnector5-pin,cablelength3m• Forpowerssupply043-700020(notincluded)• Currentmax.800mA
043-502260-W CoaxialKoehlerLED-illumination,white4000k
• Formicroobjectives20xandhigher• Binderconnector5-pin,cablelength3m• Forpowersupply043-700020(notincluded)• Currentmax.800mA
Koehler allows homogeneous illumination and increased control over the contrast and depth of field of the image. This is achived by a system of lenses and irises, which give precise control over the shape of the light entering the microscope.
Track Stand
045-600130-101 Column - 50 x 50 x 340 mm
045-600130-102 Column - 50 x 50 x 500 mm
045-600130-103 Column - 50 x 50 x 1000 mm
043-610904-002 Adapter Plate to Focus Drive OC and C
043-610004 Focus Drive C - Coarse
043-610914 Clamp Mini for Focus Drive C - Ø 35 mm
043-610022 Focus Drive OC - Coarse/Fine
043-610911 Clamp for Focus Drive OC - Ø 35 mm
045-100130-01 Manual Stage, Travel range 75 x 55 mm
043-600150-02 Alu Platform Base, 300 x 300 mm
Your Benefit
• Trackbasedstandsystem• Rocksolidforreliableopticalmeasurements• Easilyadjustable• Modular,withcompactfootprint
Key Features
• Basedon50x50mmcolumnformat• Columnheightsupto1000mm• Focustravelupto80mm• Aluminiumbase• Withmountingdia35mmforTVmicroscopes• Highprecisiondesign• CanbefittedwithXYstage
This simple stand solution enables precise vertical movement for highmagnification microscopic solutions or other measurement setups. Thecombined coarse/fine focus mechanism and the robust stand enablesthe use of micro objectives up to max. 50x.
10 11
Post Stand
Your Benefit
• Postbasedstandsystem• Rocksolidforreliableopticalmeasurements• Easilyadjustable• Modular,withcompactfootprint
Key Features
• Basedon32mmdiacolumnformat• Columnheightsupto700mm• Focustravelupto80mm• Aluminiumbase• Withmountingdia35mmforTVmicroscopes• Highprecisiondesign• CanbefittedwithXYstage
043-601039 Column - Ø 32 mm - 500 mm
043-601040 Column - Ø 32 mm - 700 mm
100-JCA-03-32 Column Clamp - Ø 32 mm (M6x1 threads for jointed coupler attachment)
043-610004 Focus Drive C - Coarse
043-610914 Clamp Mini for Focus Drive C - Ø 35 mm
043-610904-320-068 Clamp to Focus Drive C - Ø 32 mm
043-610022 Focus Drive OC - Coarse/Fine
043-610904-320 Clamp for Focus Drive OC - Ø 32 mm
043-610911 Clamp for Focus Drive OC - Ø 35 mm
045-100130-01 Manual Stage, Travel range 75 x 55 mm
043-600150-02 Alu Platform Base, 300 x 300 mm
Similar to the Track Stand our Post Stands are robust enough for high resolution microscopy. It is based on the 32 mm diameter column principle that most of the microscope manufacturers use to generate compatibilly to existing standards on the market.
Tilting Stand
043-600235 Granite Stand - 400 x 550 x 20 mm - height 440 mm
043-600235-02 Column adapter for Leica Focus Drive 010-450171
043-600235-03 Tilting column adapter - Ø 32 mm to Drive C
043-643047 LEDrive C - 32 mm - carrier 76 mm with LED-ring-light
043-600225-54 Tray - 200 x 200 mm for Granite Stand
050-70011220 TV Power Supply
043-631006 Tilting Table Ø300 mm - Vacuum
043-631003 Tilting Table Ø450 mm - Vacuum
043-631005 Tilting Table Ø400 mm - Granite
Your Benefit
• Highlyergonomicinspectionstand• Quickandeasyfull360°inspection• Compatiblewithallmajormicroscopebrands• IdealforSMT&PCBreworkenvironments
Three dimensional objects often benefit from a specific angle of view in order to reveal key details. With our Tilting Stand, it is possible to position and view your sample at an angle or to tilt and fix at the desired positions.
12 13
For very large samples, or where samples cannot be easily moved, the Microscope needs to be portable. Our Mobile Floor Stand perfectly combines mobility and stability even at high magnifications and longworking distances.
Mobile Floor Stand
043-603020 Mobile Floor Stand Advanced, Mount for Extensions
043-603008 Height Adjustable Swivel Arm; 5/8“-Hole
043-643045 LEDrive - 5/8“ - carrier 76 mm with LED-ring-light
043-530114 Tray 210x210 with Velcro strip for light sources
050-70011220TV Power Supply
Your Benefit
• Flexibleandsafehandlingofthemicroscope• Usesameequipmentatdifferentlocations• Mountingplateforlightsource• Compatiblewithmoststereoand video microscopes
Key Features
• Stablemobilestandfordifficultinspectiontasks• Quickandeasy360°positioningof the microscope• Lockablewheelsandarms• 6-axesadjustablemicroscopemount enabling any orientation
Extended Arm Stand
Your Benefit
• Useablewithhighmagnificationmicroscopes• HeavyDutyFocushandlessafelyequipment up to 20 kg• Modularsetupforlaboratoriesandteststations• Abilitytopositionmicroscopeanywhere over bench area
Key Features
• Table,wallorcolumnmounting• Extremelyrobustconstruction• Easyheightadjustment
Our unique Extended Arm Stands serve two main purposes. Firstly, in combination with the folding extension arms, they enable a completely clear bench to be maintained, and secondly it gives the user the ability to position their microscope anywhere over their bench area.
830
700
600
305
305
14 15
044-941005 Column - travel 300 mm - 500 mm
044-941009 Column - travel 570 mm - 800 mm
045-600159-01-500 Octagonal Column - 500 mm
045-600159-01-700 Octagonal Column - 800 mm
045-600159-01-1000 Octagonal Column - 1000 mm
043-603004 Column mount for swivel arms
043-603001 Double Swivel Arm; 5/8“-Hole; L=600 mm
043-603005 Height Adjustable Double Swivel Arm; 5/8“-Hole
043-603008 Height Adjustable Swivel Arm; 5/8“-Hole
043-643045 LEDrive - 5/8“
043-643046 Focus Drive C - 5/8“
043-530114-W Tray - 210 x 210 mm for light sources
044-620102-C Breadboard - 600 x 450 x 50 mm
045-600159-02-1 Counter Plate for Table Mount
043-609049 Table clamp - M10 - clamp distance 20-58 mm
Manual Stages
Our measuring stages are compact and very flexible in use. With accuracyup to 0.01 mm, all stages are black hard coated and feature 4 M5 threads to mount the stages onto flat surfaces or tables. For the control of large flat samples, e.g. large electronic boards, we recommend the use of gliding stages.
045-100130-01 Manual Stage | 75 x 55 mm travel range
Load 5 kg Travel range 75 x 55 mm Travel per knob rotation x-25 mm y-40 mm Graduation 1 mm Dimensions 180 x 155 x 27 mm Weight 1.54 kg
100-MS25-GAN Measuring Stage | 25 x 25 mm travel range100-MS50-GAN Measuring Stage | 50 x 50 mm travel range
Load 10 kg Travel range 25 x 25 mm 50 x 50 mm Travel per knob rotation x-0.5 mm y-0.5 mm Graduation 0.01 mm Dimensions 135 x 135 x 35 mm Weight 1.25 kg
100-GS100-01 Gliding Stage | 100 x 100 mm travel range100-GS200-01 Gliding Stage | 200 x 200 mm travel range
Load 10 kg Travel range 100 x 100 mm 200 x 200 mm Dimensions 300 x 250 x 58 mm 450 x 370 x 95 mm Weight 3 kg 9 kg
The gliding stage is lockable in both directions with integrated screws. The construction is solid and the movement is smooth and precise. The tables are delivered with rubber feet for stable positioning even on slippery surfaces. The tables have threads on the underside also, to enable mounting directly onto flat surfaces.
16 17
Oblique View Module
043-112108 Oblique and Direct View Module with LED Ring Light
043-112108-201 Adapter Ring for Leica M50-M60-M80
043-112108-202 Adapter Ring for Leica M205-M160-M125 and Olympus SZX16
043-112108-203 Adapter Ring for Zeiss Discovery
043-112108-204 Adapter Ring for Leica M3-MS5-MZ6
043-112108-205 Adapter Ring for Olympus SZX7-SZX10
043-112108-206 Adapter Ring for SMZ800n-SMZ1270i
Your Benefit
• Compact,easytousefullyintegratedunit• 360°inspectionwithoutmovingtheobject• Adaptstoallmajormicroscopebrands• PerfectforSMT-RepairWorks
Key Features
• Includesintegrated0.3xobjective• HighperformancevariableLEDringlight• Largeworkingdistanceof100/115mm (oblique/straightview)• Switchableobliqueanddirectviewmode• Lightpointpositioninginobliqueview• PowercordEU2mincluded
Together with our tilting stand featured on page 12, the tilting table enables you to create a highly ergonomic inspection workstation that provides freely tilting inspection or angled and locked inspection.
The Vacuum locking tilting tables come with a magnetic fixation to place and fasten PCB boards and magnetic hand support plates. A vacuum pump and a foot switch enable the table to be positioned and locked to any angle.
Your Benefit
• Highlyergonomicinspectionstand• Quickandeasyfull360°inspection• Compatiblewithallmajormicroscopebrands• PerfectforElectronicBoardRepair
Key Features
• Rocksolidstandformanytypesofinspection• Perfectinclinedviewing• Easypositioningofobjects• IdealforSMTreworkenvironments
Tilting Tables
Three dimensional objects often benefit from a specific angle of view in order to reveal key details. With our Tilting Table, it is possible to position your specimen securely at an angle or to tilt and fix your samples at the desired position without moving the part or the Lens, like with our oblique viewing solution on page 17.
18 19
Vacuum locking Tilting Table
043-631003 Tilting Table - Ø 450 mm043-631006 Tilting Table - Ø 300 mm
• Steelplatediameter Ø450mm Ø300mm• Tiltingangle <21° <24°• Weight 7.8kg 6.0kg• Vacuumadjustmentwithfootswitch• With2magnetichandsupportplates• With8PCBboardholdingmagnets
Granite Tilting Table
043-631005 Tilting Table - Granite
• GraniteplatediameterØ400mm• Tiltingangle<21°• WithØ300mmnon-sliprubberESDsurface• Weight9kg
045-600161 Tilting Table for stage insert
• 160x160mmplatefortableusage• MountingplatediameterØ120mm• Tiltingangle±20°adjustableandclampable• Withscaleforadjustment• Opendiameter78mmfortransmittedlight• Weight1,2kg
043-631003 Vacuum locking Tilting Table - Ø 450 mm
043-631006 Vacuum locking Tilting Table - Ø 300 mm
043-631005 Tilting Table - Granite
045-600161 Tilting Table for base mount
Its heavy weight and theESDsurfacearethehighlights of this version.
Your Benefit
• Easytomount• Easytoposition• Ultimatelockingstrength
Applications&Markets
• Mountingofcameraswith1/4“threadfor e.g. surveillance, code readers or in automations• Mountingofilluminationcomponentssuchas LED’sorfibreopticsinMachineVisionand Microscopy• Finepositioningofsensorsinrough environments such as soldering or outdoor applications
Jointed Coupler
Our Kniegelenke (German for knee joint or jointed coupler) are used for precise and reliable fixation of cameras, illuminations, sensors or optical accessories. They come with M6, M8 or 1/4“ threads usually in length from one link (72 mm), two links (132 mm), three links (191 mm) or even longer. You can find all available standard versions on our website.
100-JC1-63 Jointed Coupler, 1 link, M6-1/4“, L=72 mm
100-JC1-66 Jointed Coupler, 1 link, M6-M6 L= 72 mm
100-JC2-63 Jointed Coupler, 2 links, M6-1/4“ L=132 mm
100-JC2-66 Jointed Coupler, 2 links, M6-M6 L=132 mm
100-JC3-63 Jointed Coupler, 3 links, M6-1/4“ L=191 mm
100-JC3-66 Jointed Coupler, 3 links, M6-M6 L=191 mm
100-JCA-03-32 Clamp - Ø 32 mm with 2 x M6
043-320008 Guard plate for Stereo Microscopes
100-JCA-06 Base D = 100 mm (3 x M6)
100-JCA-18 Universal Clamp; Inner Threads: 1/4“, 3/8“
100-JCA-13 Adapter plate for Jointed Coupler on flat surfaces
100-JCA-02 Focussing Lens for fibers with diameter 6 mm
100-JCA-05 Holder for focussing lens
100-JCA-01 Universal Clamp 6 mm, M6
044-300183 Adapter to M5 thread
100-JCA-04 Holder for flexible light guide 6 mm
100-JCA-07 Holder for flexible light guide 10 mm
20 21
100-JC1-63 Jointed Coupler, 1 link, M6-1/4“, L=72 mm
100-JC1-66 Jointed Coupler, 1 link, M6-M6 L= 72 mm
100-JC2-63 Jointed Coupler, 2 links, M6-1/4“ L=132 mm
100-JC2-66 Jointed Coupler, 2 links, M6-M6 L=132 mm
100-JC3-63 Jointed Coupler, 3 links, M6-1/4“ L=191 mm
100-JC3-66 Jointed Coupler, 3 links, M6-M6 L=191 mm
100-JCA-03-32 Clamp - Ø 32 mm with 2 x M6
043-320008 Guard plate for Stereo Microscopes
100-JCA-06 Base D = 100 mm (3 x M6)
100-JCA-18 Universal Clamp; Inner Threads: 1/4“, 3/8“
100-JCA-13 Adapter plate for Jointed Coupler on flat surfaces
100-JCA-02 Focussing Lens for fibers with diameter 6 mm
100-JCA-05 Holder for focussing lens
100-JCA-01 Universal Clamp 6 mm, M6
044-300183 Adapter to M5 thread
100-JCA-04 Holder for flexible light guide 6 mm
100-JCA-07 Holder for flexible light guide 10 mm
Objective Accessories
Over the last 37 years we have solved many challenging adaptions of Microscope Objectives onto Microscopes or Machines. The Objective slider allows the mounting of different magnification Stereoobjectives or an objective with Ringlight and one without to rapidly change illumination conditions. The Magnetic coupler is a perfect accessory to hot swap objective lenses on a compound Microscope where an objective changer is too big or in a machine integration where an objective must be changed frequently.
043-620102-B Objective slider for 2 objectives M60x1
043-112108-201 Adapter Ring for Leica M50 | M60 | M80
043-112108-203 Adapter Ring for Zeiss Discovery
043-112108-204 Adapter Ring for Leica M3 | MS5 | MZ6
043-112108-205 Adapter Ring for Olympus SZX7 - SZX10
043-112108-206 Adapter Ring for Nikon SMZ800n - SMZ1270
043-620102-11 Adapter M58x1 to M60x1 for Nikon SMZ800 - SMZ1270
043-620102-12 Adapter M54x1 to M60x1 for Olympus SZX7 - SZX10
043-620102-13 Adapter M50x1 to M60x1 for Leica M3 | MS5 | MZ6
043-620102-14 Adapter M65x1.5 to M60x1 for long working
objectives M600
045-600158-22 Top part with M25 thread outside
045-600158-21 Top part with M26 thread outside (Mitutoyo)
045-600158-31 Bottom part with M25 thread inside
045-600158-32 Bottom part with M26 thread inside (Mitutoyo)
045-600158-33 Bottom part with M20 RMS thread inside
Magnetic Coupler for Micro-Optics
• changeobjectiveseasily• compatibletonearlyallmicroobjectives• Outerdiameter35mm• Extensionlengthof22mm
Objective Slider for Stereo-Microscopes
• Distancebetweenobjectives100mm• Snapendpositions• Dimensions265x90x28.5mm(LxWxH)• Weight0.8kg
Tube
Objective
Objective
Microscope
045-200200 Calibration Target with Resolution Test 1000LP
• Smalleststructuresize0.5μm• Largeststructuresize600μm• 10lp/mmto1000lp/mm• Matrix40x40dots,100μmand50μmgrid• ContrastandSiemensstructure• Scalewithstepsdownto10μm• Scaleinx-andy-direction• Dimension76x26x4.5mm
043-102302-72 Particle Standard
• Smalleststructuresize5μm• Largeststructuresize1025μm• Variousshapestoverifythecorrectcalculationof structure parameters• Scaleinx-andy-direction• Dimensions70x70x2mm
010-310345 Stage micrometer, 50 mm scale with 0.1 mm and 0.01 mm
• Measuringscale50mmin0.1mmand0.01mm• Perfectforcalibrationpurposes• Dimensions70x20x4mm
045-200210 Calibration Target carrier for Leica light bases
• Mountingplatediameter120mm• Forcalibrationtargetswith76x26mm• Aluminium,blackanodized• Innerbasediameter90mm• Height8mm
Targets + Add Ons
The Opto Targets enable the calibration of measurement functions in microscopes. The Particle Target consists of a field of objects in different forms and sizes allow the user to check: rectangles, ellipses, circles, rings and even fibre-shaped objects. To determine optical distortions there are three different sized arrays of cross-targets. The smallest object is as small as 5 μm. On the Calibration target there are unique structures of minimal size, for example a 1000 LP/mm setup or the Siemens star for microscopic use.
22 23
045-200200 Calibration Target with Resolution Test 1000LP
• Smalleststructuresize0.5μm• Largeststructuresize600μm• 10lp/mmto1000lp/mm• Matrix40x40dots,100μmand50μmgrid• ContrastandSiemensstructure• Scalewithstepsdownto10μm• Scaleinx-andy-direction• Dimension76x26x4.5mm
043-102302-72 Particle Standard
• Smalleststructuresize5μm• Largeststructuresize1025μm• Variousshapestoverifythecorrectcalculationof structure parameters• Scaleinx-andy-direction• Dimensions70x70x2mm
010-310345 Stage micrometer, 50 mm scale with 0.1 mm and 0.01 mm
• Measuringscale50mmin0.1mmand0.01mm• Perfectforcalibrationpurposes• Dimensions70x20x4mm
045-200210 Calibration Target carrier for Leica light bases
• Mountingplatediameter120mm• Forcalibrationtargetswith76x26mm• Aluminium,blackanodized• Innerbasediameter90mm• Height8mm
043-801101 C-Mount Extender 2x
ThisExtenderisasimplewaytodoublethemagnificationofanopticalsystem, by adding a negative focal length to the camera end.This enables you to double the magnification on the camera, but maintain the same working distance of your optical setup!
043-991604560 PHO Dust cover
Our dust cover, which cap the complete microscope, is an effective dust protection.
•Dimensionsapprox.600x450x600mm•ESD-safematerial,Cleanroomcompatible
043-991007 Eyepiece cover
Our eyepiece cover that fits over both eyepieces of a microscope is an effective dust protection and reduces light transmission from eyepiece into camera beam path.
•Dimensionsapprox.155x70x105mm•Integratedelasticsecuringband•ESD-safematerial,Cleanroomcompatible
100-CS-1 Optic Cleaning Set
Smalldust“specks”areannoying,wastetimeandcaninterferewithdetailedlabora-tory work. These tiny particles are difficult to remove from microscope and camera lenses, viewfinders and optical instruments. The cleaning kit includes an anti-static lens and optics brush, an anti-static microfibre cleaning cloth, precision cleaning solution to remove oil and residue, and a special tool for picking up dust specks.
IEC 60320 Connectors | Power Cords
044-700100 3-CoreEU 2.0m 044-700110 2-CoreEU 1.8m044-700101 3-CoreUK 2.5m 044-700111 2-CoreUK 2.0m044-700102 3-Core CH 2.0 m 044-700112 2-Core CH 2.0 m044-700103 3-CoreUS 2.0m 044-700113 2-CoreUS 2.0m
To keep your Microscope clean or to add more Magnification we have listed here some more helpful items to pimp your Laboratory. This is only a small selection of the many solutions we have developed during our long experience in developing microscope acces-sories. If you have a need for something that isnt listed here, its highly likley that we can help you! Just send us a mail to [email protected]
Overview
043-601039 500 mm043-601040 700 mm
100-JCA-03-32
045-6000130-101 340 mm045-6000130-102 500 mm045-6000130-103 1000 mm
043-610904-001
043-600150-01 300 x300 mm bore 90x90 mm
043-600150-02 300x300 mm bore 60x60 mm
045-100130-01 75x55 mm bore 60x60 mm
100-MS25-GAN 25x25 mm100-MS50-GAN 50x50 mm bore 60x60 mm
043-610004
043-610904-320-068
050-502076126W12
043-600235-03
043-600235-02
043-600235
043-600225-54 200x200 mm
043-610022
043-610911
043-610904-320
100-SAA-232
100-SAA-030 100-SAA-040
100-SAA-110
24 25
Please also refer to the detailed listing in numerical
order on the next page.
100-GS100-01 100x100 mm100-GS200-02 200x200 mm
043-631006 Ø 300 mm043-631003 Ø 450 mm043-631005 Ø 400 mm Granite
043-603004
045-600159-01-500 500 mm045-600159-01-700 700 mm045-600159-01-1000 1000 mm
043-603020
043-530114
100-SAA-020
043-610914
043-610920 Ø 76 mm
043-530114-W
045-600157-01
043-643041
043-610004
043-600235-03
043-600235-02
100-SAA-110
044-941005 580 mm044-941009 800 mm
044-620102-C 600x450 mm
043-609049045-600159-02-1
100-FB-OP
26
043-530114 Tray 210 x 210 mm with strip for light source
043-530114-W Tray 210 x 210 mm with adaption angle and strip for light source
043-600150-01 Alu Platform Base 300 x 300 x 12 mm - bore 90 x 90 mm
043-600150-02 Alu Platform Base 300 x 300 x 12 mm - bore 60 x 60 mm
043-600225-54 Tray 200 x 200 mm to Tilting Stand
043-600235 Granite Stand 400 x 550 mm, height 440 mm
043-600235-02 Column Adapter to Granite Stand
043-600235-03 Tilting Column Ø32 mm to Granite Stand
043-601039 Column Ø32 mm, height 500 mm
043-601040 Column Ø32 mm, height 700 mm
043-603004 Column Mount for Swivel Arms
043-603020 Mobile Floor Stand Advanced, Mount for Extensions
043-609049 Table clamp, distance 20-58 mm
043-610004 Focus Drive C - coarse
043-610022 Focus Drive OC - coarse/fine
043-610904-001 Adapter plate for Focus Drive OC and C to column 50 x 50 mm
043-610904-320 Clamp Ø32 mm to Focus Drive OC
043-610904-320-068 Clamp Ø32 mm to Focus Drive C
043-610911 Clamp for TV Microscope Ø35 mm
043-610914 Clamp for Ø35 mm, mini
043-610920 Microscope Carrier Ø76 mm to Focus Drive C
043-631003 Tilting Table Ø450 mm -Vacuum-
043-631005 Tilting Table Ø400 mm -Granite-
043-631006 Tilting Table Ø300 mm -Vacuum-
043-643041 Focus Drive C - coarse - 5/8"
044-620102-C Breadboard 600 x 450 x 50 mm
044-941005 Column with travel 300 mm, height 500 mm
044-941009 Column with travel 570 mm, height 800 mm
045-100130-01 Manual Stage 75x55 mm, Glass plate
045-600130-101 Column 50x50 mm, height 340 mm
045-600130-102 Column 50x50 mm, height 500 mm
045-600130-103 Column 50x50 mm, height 1000 mm
045-600157-01 Adapter Column with Travel to Focus Drive OP
045-600159-01-1000 Octagonal Column, height 1000 mm
045-600159-01-500 Octagonal Column, height 500 mm
045-600159-01-700 Octagonal Column, height 700 mm
045-600159-02-1 Counter Plate for Table Mount
050-502076126W12 LED Ringlight incl. Clamp Ø76 mm, white 12V
050-70011220TV Power supply 12V, 25W (adapter included)
100-FB-OP Focus Drive OP - coarse/fine
100-GS100-01 Gliding Stage travel range 100 x 100 mm
100-GS200-01 Gliding Stage travel range 200 x 200 mm
100-JCA-03-32 Clamp for Ø32 mm with M6
100-MS25-AN Measuring Stage travel range 25x25 mm
100-MS25-GAN Measuring Stage travel range 25x25 mm, glass plate
100-MS50-AN Measuring Stage travel range 50x50 mm
100-MS50-GAN Measuring Stage travel range 50x50 mm, glass plate
100-SAA-020 Folding Arm with Pin, length 300 mm
100-SAA-030 Height Adjustable Lever Arm
100-SAA-040 Folding Arm, length 300 mm
100-SAA-110 Adapter for 5/8"-Pin
100-SAA-232 Adapter with Inclinable Column Ø32 mm, length 230 mm
4 5Specifications are subject to change without prior notice
Opto GmbHLochhamer Schlag 1482166 GräfelfingMunich, Germany
+49 89 89 80 [email protected]
Opto UK LtdDaresbury Innovation CentreKeckwick Lane, DaresburyCheshire WA4 4FS, United Kingdom
+44 1925 606 [email protected]
120419
Opto France S.A.S.215, rue Noé et Célie PoncetZ.A de Fontgrave26740 Montboucher-sur-Jabron, France
+33 4 75 53 14 [email protected]