MBR is a hybrid wastewater treatment technology that combines biological treatment by activated sludge and physical treatment by membrane filtration. Compared to conventional activated sludge treatment, MBR and particularly HYDRAsub® produces high quality permeate water suitable for RO treatment and reduces drastically footprint by elimination of sedimentation tank and operation at higher MLSS.
Key Features
High operating flux -> Minimized membrane area -> Lower CAPEX and OPEX.Lower footprint : Energy savings cage design with reduced height -> Minimized energy consumption.Simple operating process: No backwash, membrane cleaned with air scouring.Durable construction: Supported PVDF hollow fiber, highly resistant to chlorine.
Membrane Bio Reactor vs Conventional Activated Sludge systems:
Key Applications
Domestic waste water: Municipalities Hotels, apartment complexes Grey waters
Industrial waste water: Food and Beverage Industry - Beer, Dairy, etc.
and Beverage
Automobile Industry
Oil Refineries Chemical Industry
HYDRAsub® product offering:
HYDRAsub® modules are comprised of PVDF hollow fiber elements,permeate adaptors,stainless steel cages (SS304 or SS316) and a unique air diffuser design. The modules are available in a wide range of sizes from 15 to 2400 m2 membrane area, covering all ranges of flow.
HYDRAsub® elements can be provided in two formats: . .
®
HYDRAsub technology: elements size of 25 m2 using a microfiltration fiber with a pore size of 0.4 µmHYDRAsubMAX technology:
elements size of 40 m2 using an ultrafiltration fiber with a pore size of 0.05 µm
PB-301-rev9-HYDRAsub2016
Hydranautics Corporate Office: 401 Jones Road, Oceanside, CA 92058, USA . Toll Free: 1-800-CPA-PURE Phone: +760-901-2500 Fax: +760-901-2578
Email: [email protected] Website: www.membranes.com
Module portfolio with HYDRAsub® and HYDRAsubMAX® elements:
Module Technology Element Membrane area (m2)
Module typical flow - Sewage
(m3/day)
Module typical flow - Industrial
(m3/day) HSM125-ES to HSM1500-ES
sub HSE25 125 to 1500 90 to 1080 60 to 720
HSMM200 -ES to HSMM2400 -ES
HSME40 200 to 2400 150 to 1750 100 to 1200
HYDRAsub® modules are available in following sizes: HSM125-ES, HSM250-ES, HSM375-ES,HSM500-ES,HSM750-ES, HSM1000-ES and HSM1500-ES.
HYDRAsubMAX® modules are available in following sizes: HSMM200-ES, HSMM400-ES, HSMM600-ES, HSMM800-ES, HSMM1200-ES, HSMM1600-ES and HSMM2400-ES.
For containerized compact systems,Shorter elements HSE15 are available
Module portfolio with HYDRAsub® and HYDRAsubMAX® elements:
HYDRAsub® goes to MAX with an optimized footprint and lower aeration requirement rates.
Module Technology Element Membrane area (m2)
Typical flow -
Sewage (m3/day)
Typical flow -
Industrial (m3/day)
Module height (mm)
Module width (mm)
Module length (mm)
HSM15-ES to HSM75-ES
HSE15 15 to 75 10 to 55 5 to 40 2172 461 1473
HYDRAsub®
HYDRAsubMAX®
HYDRAsub®
Americas Europe/AfricaHydranautics
Middle EastHydranautics
Indian SubcontinentHydranautics
S.E. Asia/AustraliaNitto Hydranautics
401 Jones Road Oceanside, CA 92058, USA Tel: +760 -901 -2500 Tel:1 -800 -CPAPUREFax: +760 -901 -2578
Wilhelmina Singel 116, NL 6221 BL Maastricht, The NetherlandsTel: +31 -(0) 43 -350 -3470Fax: +31 -(0)43 -350 -3489
407, Palm Springs Center, Link Road, Malad (West), Mumbai 400 064, India Tel:+91 -22 -40030500Fax:+91 -22 -40030496
438 Alexandra Road#19 -01/04, Alexandra Point Singapore 119958 Tel: +65 -6879 -3820 Fax: +65 -6223 -7690
Japan Hydranautics /Nitto
26F, Shinagawa Season Terrace, 1-2-70, Konan, Minato-ku, 108-0075, TokyoTel:+81-3-6632-2044Fax:+81-3-6632-2019
Jebel Ali Free ZoneSouth Zone,
Bldg no . S10122 (A2)
Office no 31
P.O.Box: 112839 Dubai
Tel: +971 4 889 5806United Arab Emirates
Hydranautics – A Nitto Group CompanyCalle Constitucion 3, 3° 5ªSant Just Desvern, 08960Barcelona (Spain)Ph: +34 934 731 722Fx: +34 934 731 485
More than 360 references along with MRC for sewage and industrial application including 45 MLD and 25 MLD plants in Singapore and Mexico.