Installed in museums worldwide!
&
Fixtures and systems that last a lifetime.
track fixtures
systems
Artim
a LED
/3 O
Maxima LED O
magIc wand®
Low voltage fixtures, with electronic transformers, for 120-volt track. Cute and capable. Splayed apertures to reduce direct glare and socket caps to prevent light backsplash. Six fixtures for MR11, MR16, ALR12, ALR18 and AR70 12-volt lamps. Use with all nine Edison Price Lighting 120-volt track systems. Corning Museum of Glass, Corning, NY
mInImax®including mInImax® LED
Our newest family of fixtures, powered by integral Xicato® LED modules, quartz MR16 lamps or metal halide MR16 lamps. Small, visually quiet cylinders packed with features: switches, cross-baffles for glare control and tool-free ‘lever lock’ locking.Use with all nine Edison Price Lighting 120-volt track systems; or, in the case of 277-volt MiniMax LED or MiniMax MR16 MH, with our three 277-volt track systems.
mInI wand™
Low voltage accent lights without transformers, for 12-volt AutoTrak® -LV. Minimal and functional. Locked by tightening the knurled ends of the stems. Five fixtures for MR11, MR16, ALR12, ALR18 and AR70 12-volt lamps.
mInIma®
Our version of basic track lighting.
Open yoke fixtures with a choice of accessories: a holder for lenses or color filters, a cross-baffle for glare-free accent lighting, and a ‘kicker’ and lens for wallwashing. Five fixture-and-accessory sets for PAR20, PAR30, PAR38, PAR36 and AR111. Use with all nine Edison Price Lighting 120-volt track systems.
Gagosian Gallery, Los Angeles, CA
Gourmet Magazine, New York, NY
t r a c k f i x t u r e s
aRTIma®
Designed with the emphasis on easy maintenance. Easily aimed and locked in both planes. Quickly relamped without disturbing focus, lenses or filters. Fifteen fixtures for integral Xicato® LED modules as well as MR16, AR70, PAR36, AR111, PAR20, PAR38 and PAR56.
Use incandescent Artima’s with all nine 120-volt track systems; use LED-powered Artima’s with all nine 120-volt track systems or all three 277-volt systems.
Getty Museum, Los Angeles, CA
t r a c k f i x t u r e s
maxIma®
Classics, for good reason. Sleek cylinders blend into the ceiling, freeing attention for the display below. Nine accent lights and wallwashers for MR16, AR70, PAR36, AR111, PAR30 and PAR38 lamps; four accent lights and wallwashers with integral Xicato® LED modules.Use incandescent Maxima’s with all nine Edison Price Lighting 120-volt track systems; use LED-powered Maxima’s with all nine 120-volt track systems or all three 277-volt systems.
The Menil Collection, Houston, TX
The pure wallwasher with lateral glare control and hidden flexibility. Uniform ceiling-to-floor illumination from T4 halogen or metal halide lamps. A rotatable reflector allows you to adjust the vertical placement of the wallwash while the fixture housing stays square with the wall and ceiling.
Both fixtures can be used with all nine Edison Price Lighting 120-volt track systems; or, in the case of 277-volt Stacklite MH T4, with our three 277-volt track systems.
sTacklITe®
Farnsworth Art Museum, Rockland, ME
PAR20, PAR30 and PAR38 metal halide fixtures with electronic ballasts. 120-volt fixtures are designed for use with all nine Edison Price Lighting 120-volt track systems; 277-volt fixtures are designed for use on our three 277-volt track systems.
mInIma mH
Reagan Washington National AirportWashington, DC
including mIdImax® LED & maxIma® LED
including aRTIma® LED/3
t r a c k s y s t e m s
surface
PeNDaNT
recesseD
Metropolitan M
useum of Art
New
York, NY
2 1/16” high x 1” wide
6’ max between attachments
L, T and X joints available
SightLine® S 120 20 2 AutoTrak® -50 S 120 50 1 HighLine® S 277 20 1 AutoTrak-LV S 12 50 1
factory cutshop drawing approval required
factory cutshop drawing approval required
field cutorder from spec sheet
field cutorder from spec sheet
2 1/16˝ high x 1̋ wide
6´ max between attachments
L, T and X joints available
voltage circuitsamps per
circuit
San Antonio Museum
of ArtSan Antonio, T
X
2 1/16” high x 1” wide
6’ max between attachments
L, T and X joints available
SightLine P 120 20 2 AutoTrak -50 P 120 50 1 HighLine P 277 20 1 AutoTrak-LV P 12 50 1
factory cutshop drawing approval required
factory cutshop drawing approval required
field cutorder from spec sheet
field cutorder from spec sheet
113/16̋ high x 1̋ wide
6´ max between pendants
L, T and X joints available
voltage circuitsamps per
circuit
Whitney M
useum of Am
erican ArtN
ew York, N
Y
2 1/16” high x 1” wide
6’ max between attachments
L, T and X joints available
SightLine R 120 20 2 AutoTrak -50 R 120 50 1 HighLine R 277 20 1 AutoTrak-LV R 12 50 1
factory cutshop drawing approval required
factory cutshop drawing approval required
field cutorder from spec sheet
field cutorder from spec sheet
11/2̋ deep x 17/8˝ wide (incl. 9/16˝ flanges)
4˝ deep at feeds and joints single recessed ceiling-supporting extrusion;easy to install
L, T and X joints available
voltage circuitsamps per
circuit
t r a c k s y s t e m s
recesseD flush
Asia Society New
York, NY
2 1/16” high x 1” wide
6’ max between attachments
L, T and X joints available
SightLine RR 120 20 2 AutoTrak -50 RR 120 50 1 HighLine RR 277 20 1 AutoTrak-LV RR 12 50 1
factory cutshop drawing approval required
factory cutshop drawing approval required
factory cutshop drawing approval required
field cutorder from spec sheet
11/2̋ deep
4˝ deep at feeds and joints
single recessed extrusion; easy to install
L, T and X joints available
voltage circuitsamps per
circuit
PeNDaNT loNg sPaN
Museum
of American Folk Art N
ew York, N
Y
2 1/16” high x 1” wide
6’ max between attachments
L, T and X joints available
AutoTrak PY 120 20 2 AutoTrak -50 PY 120 50 1 AutoTrak PZ 120 20 2 AutoTrak-50 PZ 120 50 1
factory cutshop drawing approval required
factory cutshop drawing approval required
factory cutshop drawing approval required
factory cutshop drawing approval required
AutotrAk PY3¾˝ high x 15/8˝ wide12´ max between pendants
AutotrAk PZ5˝high x 2˝wide14´ max between pendants
L, T and X joints available for all
voltage circuitsamps per
circuit
uPliNe
SAP New
York, NY
2 1/16” high x 1” wide
6’ max between attachments
L, T and X joints available
3¾˝high x 15/8˝wide pendant track with integral T5 or T5HO fluorescent uplighting.
uPLINE/3 for 3/8 IPS pendantsuPLINE/3/AC for cables Upline 3 and 3/AC in 4', 7' and 10' runs
uPLINE/4 for 3/8 IPS pendantsuPLINE/4/AC for cables Upline 4 and 4/AC in 5', 9' and 13' runs
order from spec sheet
order from spec sheet
order from spec sheet
order from spec sheet UpLine/3 120 20 2 UpLine/3/AC 120 20 2 UpLine/4 120 20 2 UpLine/4/AC 120 20 2
voltage circuitsamps per
circuit
t r a c k s y s t e m s D
iscovery Store, Washington Pavilion
Sioux Falls, SD
2 1/16” high x 1” wide
6’ max between attachments
L, T and X joints available
2 1/16˝ high x 1̋ wide
6´ max between attachments
L, T and X joints available
4 11/16˝sq x 2 1/8˝deep outlet boxes required at feeds
factory cutshop drawing approval required
AutoBus®- 120 S 120 60 1 AutoBus - 277 S 277 60 1
factory cutshop drawing approval required
voltage circuitsamps per
circuit
surface busway cross-section identical to surface track
IBM G
alleryN
ew York, N
Y
2 1/16” high x 1” wide
6’ max between attachments
L, T and X joints available
113/16˝ high x 1̋ wide
6´ max between pendants
L, T and X joints available
4 11/16˝sq x 2 1/8˝deep outlet boxes required at feeds
factory cutshop drawing approval required
AutoBus - 120 P 120 60 1 AutoBus - 277 P 277 60 1
factory cutshop drawing approval required
voltage circuitsamps per
circuit
The Shilla Seoul H
otelSeoul, K
orea
2 1/16” high x 1” wide
6’ max between attachments
L, T and X joints available
11/2̋ deep x 17/8˝ wide (incl. 9/16˝ flanges)
4˝ deep at feeds and joints
single recessed ceiling-supporting extrusion;easy to install
L, T and X joints available
factory cutshop drawing approval required
AutoBus - 120 R 120 60 1 AutoBus - 277 R 277 60 1
factory cutshop drawing approval required
voltage circuitsamps per
circuit
PeNDaNT busway cross-section identical to pendant track
recesseD busway cross-section identical to recessed track
VOLTS120 voLt service is the most popular choice for track lighting systems and gives you the greatest selection of track fixtures.277 voLt service is useful for ballasted fixtures on very long runs of track; as in `big box´ stores and supermarkets.12 voLt service is required to power small, low voltage track fixtures; for corporate conference rooms and residences.
AMPS & CIRCUITS20 AmP service is the most frequent choice for track lighting systems for two reasons:•20-amptracksmaybecut to length in the field, allowing us to make
SightLine and HighLine systems consisting of track, feed and joint components for assembly by the installer
• two 20-amp circuits (sharing a neutral) can be provided in each length of track; with two separately-controlled circuits, you can power twice as many fixtures per foot of track and compose multiple lighting programs for the same space
50 AmP service is recommended for:•spaceswithextensive track layouts, like galleries or museums, because 50-
amp systems require fewer electrical feeds and result in lower installation costs
•spaceswhererunsoftrack longer than 20’ must be powered from a single electrical feed
•spaceswhere small transformer-less low-voltage fixtures are desired. Autotrak-Lv systems make it possible to power these fixtures in useful numbers per circuit; a 50-amp 12-volt circuit, powered by a remote transformer (by others), can accept twelve 50-watt low voltage fixtures (a 20-amp 12-volt circuit would accept only four fixtures).
Autotrak-50 track systems are factory-cut to the lengths you require. We offer mitered corners, seamless integral feeds, ‘hardwired’ emergency fixtures, and other features not available with standard field-cut track systems – including a detailed layout for your approval.
60 AmP AutoBus busway systems are intended for spaces where the track system will electrify not just lighting fixtures but appliances or exhibits by means of drop cords; examples include museums, supermarkets, `big box´ stores and convention centers. Note that busways may require extra heavy gauge service wires and larger than normal outlet boxes, and include #8 wire leads that limit the available feed details. AutoBus-120 and AutoBus-277 are factory-cut to lengths required.
One of the primary features of track lighting is the ability to move fixtures from point to point – but that flexibility is limited by voltage and amperage. A track fixture is made so that it can plug into track that will power it safely and not plug into track that could cause it to malfunction.
Our track systems are grouped into four families, each of which can share track fixtures:
•SightLine, upLine and Autotrak (120 volt, 20 amp)
•Autotrak-50 and AutoBus-120 (120 volt, 50 and 60 amp)
•HighLine and AutoBus-277 (277 volt)
•Autotrak-Lv (12 volt)
Keep these four families in mind when specifying your projects.
voltsamps
circuits...your choices
&
compatibility: fixtures & tracks
opt ical
Incandescent reflector lamps, especially quartz halogen PAR30’s and PAR38’s, are less than perfect light sources. Just aim one on a blank wall. You may see squiggly shadows in the center of the beam caused by the lamp’s filament, or ‘sprinkles’ of shadow around the perimeter of the beam caused by the thick edge of the lamp’s lens. Beam smoothers clean up these imperfections. Clear disks of glass finished with stipples (tiny beads of glass that diffuse light), beam smoothers make imperfect reflector lamps suitable for the most careful display lighting.
Sometimes the distributions offered by an incandescent lamp or LED luminaire just won’t do the job. You may want to widen a ‘stock’ distri-bution or to stretch a beam in both directions. Spread lenses perform these tasks. Three lenses - 30°, 55° and 70° - extend a lamp’s beam along one axis, allowing you to highlight wider areas from a single fixture, and our unique 40° x 70° lenses spread the beam in both directions for wallwashing.
In addition to refracting light at reliable angles, our spread lenses are stippled, just like our beam smoothers, to diffuse away imperfections. And, if two tasks aren’t enough for one piece of glass, our most popular spread lenses are offered in the two colors most popular for architectural lighting - Daylight Blue and Surprise Pink.
Color filters require careful design. Deeply saturated colors, like our amber, blue, green and red, absorb a lot of heat. Specially tempered, stipled glass permits these colors to be used with incandescent lamps as hot as 250 watts. Two special, subtle colors deserve mention: Daylight Blue cools down incandescent lamps to a color compatible with daylight, and Surprise Pink makes people look radiantly healthy - a great addition to restaurants, clubs and hotels.
You may find an incandescent lamp or LED luminaire with the right color and distribution but too much light. Screens reduce the light output of a reflector lamp by half or two-thirds without affecting color or distribution.
All incandescent lamps emit enough ultraviolet (UV) radiation to fade textiles, manuscripts, watercolors and other sensitive works of art over time. Retail spaces, museums and residences require protection from UV without sacrificing the color or quantity of light. Our uv filters are Pyrex disks coated with a film that blocks 99% of the UV region of the spectrum while maintaining a color rendering index of 95%.
accessories