Download - Material testing
![Page 1: Material testing](https://reader035.vdocuments.us/reader035/viewer/2022062323/56815cc5550346895dcac906/html5/thumbnails/1.jpg)
Lesson 2
Material testing
![Page 2: Material testing](https://reader035.vdocuments.us/reader035/viewer/2022062323/56815cc5550346895dcac906/html5/thumbnails/2.jpg)
Stress stress – internal force in a material which
tends to resist deformation when subjected to external forces
intensity of a stress unit depends on the size of the force acting on a unit area of the material
applied force stress =---------------------c.s.a. of a material
![Page 3: Material testing](https://reader035.vdocuments.us/reader035/viewer/2022062323/56815cc5550346895dcac906/html5/thumbnails/3.jpg)
Types of stressesCompressive stressTensile stressShear stressTorsionBending
![Page 4: Material testing](https://reader035.vdocuments.us/reader035/viewer/2022062323/56815cc5550346895dcac906/html5/thumbnails/4.jpg)
Compressive stressCompressive stress is the stress applied
to materials resulting in their compaction (decrease of volume).
Usually compressive stress is applied to bars, columns, etc.
![Page 5: Material testing](https://reader035.vdocuments.us/reader035/viewer/2022062323/56815cc5550346895dcac906/html5/thumbnails/5.jpg)
Tensile stressTensile stress is the stress state leading
to expansion (volume and/or length of a material tends to increase). In the uniaxial manner of tension, tensile stress is induced by pulling forces across a bar, specimen, etc.
![Page 6: Material testing](https://reader035.vdocuments.us/reader035/viewer/2022062323/56815cc5550346895dcac906/html5/thumbnails/6.jpg)
Shear stressShear stress is a stress state where the
shape of a material tends to change without particular volume change.
![Page 7: Material testing](https://reader035.vdocuments.us/reader035/viewer/2022062323/56815cc5550346895dcac906/html5/thumbnails/7.jpg)
Torsionthe stress which resists a force tending to
twist the material (e.g. axle, screw, etc.)
![Page 8: Material testing](https://reader035.vdocuments.us/reader035/viewer/2022062323/56815cc5550346895dcac906/html5/thumbnails/8.jpg)
BendingBending occurs when the force applied
tends to pull a horizontal bar out of its straight line.
![Page 9: Material testing](https://reader035.vdocuments.us/reader035/viewer/2022062323/56815cc5550346895dcac906/html5/thumbnails/9.jpg)
StrainStrain = distortion of a material
(permanent change in size and shape due to stress)
![Page 10: Material testing](https://reader035.vdocuments.us/reader035/viewer/2022062323/56815cc5550346895dcac906/html5/thumbnails/10.jpg)
Material testingTensile test – measures strength and ductility of a
materialA) a static increasing pull is applied until fracture results
(stress - strain curve)B) a dynamic load is applied giving data on fatigue impact
Impact test – measures the energy absorbed by a material when it is fractured
Hardness test – measures material resistance to indentation
Creep test – measures slow plastic deformation of a material under constant stress
![Page 11: Material testing](https://reader035.vdocuments.us/reader035/viewer/2022062323/56815cc5550346895dcac906/html5/thumbnails/11.jpg)
Testing machine
![Page 12: Material testing](https://reader035.vdocuments.us/reader035/viewer/2022062323/56815cc5550346895dcac906/html5/thumbnails/12.jpg)
Testing procedurea specimen of standard size = test piecegrip in jawsapply load gradually (tensile or
compressive)extend, extension, extendedoriginal length = L1new length = L2deformation = extension/original length
![Page 13: Material testing](https://reader035.vdocuments.us/reader035/viewer/2022062323/56815cc5550346895dcac906/html5/thumbnails/13.jpg)
Stress – Strain Curve
![Page 14: Material testing](https://reader035.vdocuments.us/reader035/viewer/2022062323/56815cc5550346895dcac906/html5/thumbnails/14.jpg)
Modulus of elasticitythe modulus of elasticity (elastic modulus)
of an object is defined as the slope of its stress-strain curve in the elastic deformation region
![Page 15: Material testing](https://reader035.vdocuments.us/reader035/viewer/2022062323/56815cc5550346895dcac906/html5/thumbnails/15.jpg)
Yield point= the stress at which a material begins to
deform plastically
prior to the yield point the material will deform elastically and will return to its original shape when the applied stress is removed
once the yield point is passed, some fraction of the deformation will be permanent and non-reversible
![Page 16: Material testing](https://reader035.vdocuments.us/reader035/viewer/2022062323/56815cc5550346895dcac906/html5/thumbnails/16.jpg)
Proof stress (Offset yield point)when a yield point is not easily defined
based on the shape of the stress-strain curve an offset yield point is arbitrarily defined
the value for this is commonly set at 0.1 or 0.2% of the strain
![Page 17: Material testing](https://reader035.vdocuments.us/reader035/viewer/2022062323/56815cc5550346895dcac906/html5/thumbnails/17.jpg)
Proof stress (Offset yield point)
![Page 18: Material testing](https://reader035.vdocuments.us/reader035/viewer/2022062323/56815cc5550346895dcac906/html5/thumbnails/18.jpg)
Ultimate tensile strength (UTS)= the maximum stress that a material can
withstand while being stretched or pulled before necking (c.s.a. of a material is reduced)
![Page 19: Material testing](https://reader035.vdocuments.us/reader035/viewer/2022062323/56815cc5550346895dcac906/html5/thumbnails/19.jpg)
Factor of safetydescribes the structural capacity of a
system beyond the expected loads or actual loads (= how much stronger the system is than it usually needs to be for an intended load)