Transcript
Page 1: MATERIAL & PACKAGE TESTING LABORATORY...Wonastow Road Monmouth NP25 5TW Tel: +44 (0) 1600 772222 Direct: +44 (0) 1600 775707 Fax: +44 (0) 1600 716533 e-mail: monlab@triwall.dssp.com

Wonastow RoadMonmouth NP25 5TWTel: +44 (0) 1600 772222Direct: +44 (0) 1600 775707Fax: +44 (0) 1600 716533e-mail: [email protected]

MATERIAL & PACKAGE TESTING LABORATORY

CLIENT : KAYSERSBERG PLASTICS

24 November 2003

PURPOSE OF TESTING

To determine the compressive value of four different types of plastic case.Three samples of each case were supplied.Approximate external dimensions of case: 785 x 369 x 160 mm

CONDITIONING OF SAMPLES

The samples were not conditioned prior to testing.

RESULTS

Compressive value

Mean values:

A/A 506 kgA/B 479 kgB/A 576 kgB/B 517 kg

Please note that the value above is a compressive value not a stacking load value.

The result should only be used as a guide as the number of samples tested limits the accuracy of the test.

Page 1 of 2 23/11/11

Page 2: MATERIAL & PACKAGE TESTING LABORATORY...Wonastow Road Monmouth NP25 5TW Tel: +44 (0) 1600 772222 Direct: +44 (0) 1600 775707 Fax: +44 (0) 1600 716533 e-mail: monlab@triwall.dssp.com

Photographs

Included is a selection of photographs showing the cases after compression.

I hope this is satisfactory. If you should require any further information, please do not hesitate to contact me

Ben Ôven Quality Technician

Page 2 of 2 23/11/11


Top Related