2019
.02.
21
CALIFORNIA ACCENT LIGHTING, INC. | calilighting.com
lipLEDs™ 8350 Series
DRY LOCATION UL2108, CSA C22.2#9UL8750, CSA250
VOLTAGE24VDC
L70 LED LIFE60,000 hrs.
DIMMINGDMX-512
LAMP TYPE Color Tuning LEDs
lipLEDsTM Series is a field cuttable system designed with long life, energy efficient LEDs that result in low maintenance installations. lipLEDsTM is excellent to illuminate areas for cove lighting, accent lighting, backlighting, and other indirect lighting applications.
Lighting for the Professional Designer
FIELD CUTTABLE
SYSTEM
Color Tuning 8W 24VDC
RoHSCOMPLIANT
10-DAY
M A D E I N
U S AMA D E I N USA
MA D E I N USA
2019
.02.
21
800.921.CALI | CALIFORNIA ACCENT LIGHTING, INC.
APPLICATIONS Accent, Decorative Lighting
VOLTAGE 24VDC
LAMP TYPE Color Tuning LEDs
DIMMING DMX-512
LENGTH Built to Order
MOUNTING Mounting Clips or Mounting Channel
VIEWING ANGLE 120 Degrees
L70 LED LIFE 60,000 hrs.
MAXIMUM RUN*(Based on 5 amps) 15' (8W)
LISTINGDry LocationUL2108, CSA C22.2#9UL8750, CSA250
lipLEDs™ series is a 24 Volt system that requires a 24VDC (secondary side) transformer. The standard primary side voltage on our transformers is 120V or 277V. Consult factory for other primary side voltages.
lipLEDs™ 8350 SERIES FEATURES
2019
.02.
21
CALIFORNIA ACCENT LIGHTING, INC. | calilighting.com
PERFORMANCE
430 440 460
470
480
490
500
510
520 530
540
550
560
570
580
590
600
610 620
630 640
650 700
380
0.4057, 0.3875
Y
X
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.90
0
Chromaticity Diagram
Polar Graph 43
32
21
11
2
1
LED NUMBER DESCRIPTION
LED-CT 2400K-6400K Color Tuning
2019
.02.
21
800.921.CALI | CALIFORNIA ACCENT LIGHTING, INC.
LENS AND SINGLE LIGHT STRIP
HOW TO ORDER OR SPECIFY
EXAMPLE: LLED8350-F-8W-DMX-LED-CT-DRY-WH
LLED8350 light strip is field-cuttable every 3.95” for easy installation without rigorous requirements.
8' maximum extrusion and lens length (Dry location field cuttable)
.07”
.62”
Clear Lens (CL) 50% Semi-Frosted Lens (SF)Frosted Lens (F)
8W (Max 15')
0.87”
SERIES OPTICS WATTS PER FOOT DIMMING LED DRY FINISH
LLED8350*3Clear Lens (CL)*4
8 Watts (8W) DMX-512 (DMX) 2400K-6400K Color Tuning
(LED-CT)
Indoor (DRY) Natural Silver (NA)*2
LLED8350-CMW Polished (PA)
LLED8350-LSR50% Semi-Frosted Lens(SF)
White (WH)
LLED8350-LW Satin (SA)
LLED8350-LWR100% Frosted Lens (F)
Black (BK)
LLED8350-UC*3 Green (GN)
LLED8350-WRC Red (RD)
LLED8350-WRCR Silver (SR)
*1 Maximum run based on 4 amps for class II applications 11’ (8W)*2 Standard Finish: Natural Silver if left blank (Finish does not apply to LLED8350)*3 No optics available*4 Standard Lens - Clear if left blank
2019
.02.
21
CALIFORNIA ACCENT LIGHTING, INC. | calilighting.com
LLED8350-UC
1.33”
.46”
POWER CONNECTORS
Power Connector White Jacket(#LLED8350-PC-W)
36”
Power Connector(#LLED8350-PC)
36”
Power Connector Black Jacket(#LLED8350-PC-B)
36”
SURFACE MOUNT | Mounting Options
LLED8350-WRCLLED8350-LW
LLED8350
RECESS MOUNT | Mounting Options
CORNER MOUNT | Mounting Options
LLED8350-WRCR
LLED8350-CMW
PENDANT MOUNT | Mounting Options
X”
Pendant Mount #LLED8350-LSR-PM-X
(X=Specify Length)
LLED8350-LWR
Channel Clip #LLED8350-UC-CP
1.33”
.36”
Mounting Clip#LLED8350-CMW-MC
Spring Loaded Mounting Clip#LLED8350-XXX-SPR-MC
5.0”
Canopy #LLED8350-LSR-CN-XX
(XX=Finish)
Mounting Clip #LLED8350-MCS
1.33”
.36”.07”
.62”
Mounting Channel #LLED8350-UC
1.15”
1.42”.50”
1.15”
Mounting Clip #LLED8350-LW-MC
Mounting Clip #LLED8350-LW-MC
Mounting Clip #LLED8350-UC-MC
5.75”
1.34”
1.34”
LLED8350-LSR
Recessed ChannelRecessed Channel
2019
.02.
21
800.921.CALI | CALIFORNIA ACCENT LIGHTING, INC.
TRAXXX-E-UNV-24VDC-10V120V-277V
LLED8350
Detail D
DC
IN12
-24V
OU
TPU
T
V-V+
V+B
GR Yellow
Brown
White
+-
DMX -DMX +
DMX Ground
Power Ground
Power DC+
DMX-512Input
DMX-512Output 1
23
45
67
81
23
45
67
8
Pin1 : D
ata+P
in2 : Data-
Pin7 : G
ND
Pin8 : G
ND
Detail B
To 120V Power Source
White
Yellow
Brown
Output24VDC
Input120V-277VACDetail D
Wiring
Detail ESolder Connection
Detail BEthernet Port
Plug-In
Plug-In
Detail AEthernet Connection to Connector Block
AC Adapter
Wall Controller(DMX-CT-128C)(Not Included)
FrontBack
TRAXXX-E-UNV-24VDC-10V(Required, Not Included)
(Must use electronic transformer)
Detail A
White / Brown (Ground)
Orange (-)
White / Orange (+)
PowerDC+
PowerGround
DMXGround
DMX-
DMX+
DMX Decoder(DMX-CT-5A)
(Required, Not Included)
Dark Red(Positive)
Blue(Neutral)
To PC
BrownWhite
Yellow
Detail EDetail C
Set DMX address using DIP switches.Refer to DMX-CT-5A for more informationon DMX addressing.
1 2 3 6 8 9 10754
Signal TerminatorDetail CDIP Switches
DIM+
DIM-
V-Hot V+Ground
Neutral DIM+DIM-
TRAXXX-E-UNV-XXVDC-10V
Cap off dimmingwires if not in use
transFORMER™ Electronic: 0-10V Dimming
Product Code Max.Watts Input Output Input AC Current Power
FactorWidth(W)
Height(H)
Depth(D)
TRA16-E TRA16-E-UNV-24VDC-10V 16 120V-277V 24VDC .2A / 277VAC or .4A / 120VAC .92 12.7” 3.43” 2.66”
TRA25-E TRA25-E-UNV-24VDC-10V 25 120V-277V 24VDC .2A / 277VAC or .4A / 120VAC .92 12.7” 3.43” 2.66”
TRA40-E TRA40-E-UNV-24VDC-10V 40 120V-277V 24VDC .25A / 277VAC or .6A / 120VAC .92 12.7” 3.43” 2.66”
TRA60-E TRA60-E-UNV-24VDC-10V 60 120V-277V 24VDC .3A / 277VAC or .64A / 120VAC .92 12.7” 3.43” 2.66”
TRA80-E TRA80-E-UNV-24VDC-10V 80 120V-277V 24VDC .4A / 277VAC or .85A / 120VAC .94 12.7” 3.43” 2.66”
TRA90-E TRA90-E-UNV-24VDC-10V 90 120V-277V 24VDC .4A / 277VA or .85A / 120VAC .95 12.7” 3.43” 2.66”
TRA96-E TRA96-E-UNV-24VDC-10V 96 120V-277V 24VDC .5A / 277VAC or 1.2A / 120VAC .93 15.7” 4.42” 2.92”
TRA120-E TRA120-E-UNV-24VDC-10V 120 120V-277V 24VDC .55A / 277VAC or 1.4A / 120VAC .93 15.7” 4.42” 2.92”
TRA150-E TRA150-E-UNV-24VDC-10V 150 120V-277V 24VDC .7A / 277VAC or 1.7A / 120VAC .92 15.7” 4.42” 2.92”
TRA185-E TRA185-E-UNV-24VDC-10V 185 120V-277V 24VDC .8A / 277VAC or 2.1A / 120VAC .92 15.7” 4.42” 2.92”
TRA240-E TRA240-E-UNV-24VDC-10V 240 120V-277V 24VDC 2A / 277VAC or 4A / 120VAC .95 15.7” 4.42” 2.92”
TRA320-E TRA320-E-UNV-24VDC-10V 320 120V-277V 24VDC 1.45A / 277VAC or 3.5A / 120VAC .94 15.7” 4.42” 2.92”
Transformer (Indoor or Outdoor Rated)
** Class II 24VDC TRA16-E, TRA25-E, TRA40-E, TRA60-E, TRA-80E, TRA90-E
Technical Requirements For Control Equipment (0-10V Protocol)
• The output current level of the dimmable driver is controlled by DC voltage (0-10V) applied to the control terminals (blue and white). The light output of LEDs is controlled by the amount of output current from the dimmable driver.
• The control device must be capable of sinking a DC current flow from the driver. The maximum amount under any condition is 500 microamps (uA) per driver.
• The control terminals of the dimmable driver are isolated from the power lines and are suitable for use as Class 2 wiring. Multiple drivers are desired for use with same control device, the control terminals may be connected in parallel in a bus configuration.
• Since the control bus is Class 2 wiring, all control devices that are connected to the power line must have proper isolation between the power line and the control terminals/bus.
• The control device, which intends to control more than one dimmable driver, must be capable of sinking the total current supplied to control bus by the drivers.
• If the control terminals/bus is shorted in any case, the current on the control terminals/bus will be 500 microamps (uA) per driver maximum.
• If the control terminals are opened, the voltage on the control terminals will then be 10V ± 0.5 volt. As a result, dimmable driver supplies maximum output current to LEDs under this condition.
• The driver is intended for use with control voltages between 0 and 10 VDC. The control equipment must not impose a voltage greater than 11 V peak maximum on the driver control terminals.
Dimming Protocol (0-10V) TRA-E Compatible Dimmers|
2019
.02.
21
CALIFORNIA ACCENT LIGHTING, INC. | calilighting.com
DESIGN GUIDELINES
120-277VAC Input
Signal Terminator(DMX-RJ45-TERMINATOR)
24VDC Output
RJ45 EthernetConnection
White
Brown
Yellow
120V Input
DMX Decoder(DMX-CT-5A)
TRAXXX-E-UNV-24VDC-10V(Required, Not Included)
(Must use electronic transformer)
Wall Controller(DMX-CT-128C)(Not Included)
LLED8350
SPECIFICATIONS
PACKAGE Controller, CD-ROM, USB cable, connector block
OS REQUIREMENTS Mac OS X 10.6/10.7/10.8, Windows XP/Vista/7/8 32/64 bit, and USB 2.0
SOFTWARE Easy Stand Alone, ESA2 (PC & Mac)
VERSIONS Black or white glass design
CONNECTIONS Power (2 pins), DMX, (3 pins), Port (2 pins), Micro USB
POWER 5.5V to 12VDC (AC/DC adapter in option). Max 5.5V with USB
CERTIFICATIONS EC, EMC, ROHS, ETL, UL
KEYPAD 86x76x10mm, 110g
PACKAGE 140x135x50, 365g
USE Environment IP20. Temperature 0°C to 50°C
AVAILABLE MEMORY
CHANNELS CHANNELS
8 1691
16 1011
32 557
48 383
64 291
80 233
96 195
112 166
128 145
RGB Controller
• DMX Standalone Controller with glass face (128 channels)• 3 touch-sensitive buttons (on/off/miode, previous, next)• Up to 24 dynamic or static scenes (8 first visualized by an LED)• Live intensity and color settings• Programmable through included USB cable and control software• Compatible with any DMX fixture or DMX LED driver• Ready to use (pre-loaded with 8 scenes and 42 RGB fixtures)• Latest ARM CPU technology• Customized design for OEM, wall mountable• One dry contact trigger port on PCB
Controller
3.38”
3.38”
DMX Mode - Set DMX address to be used with DMX 512 Standard Protocol
1. DMX Addressing: Set DMX address using the Dip Switches on the DMX-RGBW-5A. 2. Use Binary Code to set Address.3. Connect to a DMX Master Controller such as DMX-RGB-128C or Butler XT-2 to control RGB Functions.
2019
.02.
21
800.921.CALI | CALIFORNIA ACCENT LIGHTING, INC.
DESIGN GUIDELINES
Option A - Straight Runs
Option B - Rectangular Runs
.33” 1.5”
Option C - Runs with Custom Continuous Connector
XX" Length
Detail BContinuous Connector (#LLED8350-CC-XX)(XX - Specify Length)
Detail A
.33” 1.5”
Detail A
.33” 1.5”
.33”
1.5”
3”
Detail B
Continuous Connector (#LLED8350-CC)
Power Connector(#LLED8350-PC)
36" total length
Detail BContinuous Connector
(LLED8350-CC)
Detail APower Connector(#LLED8350-PC)
Power Connector(#LLED8350-PC)
2019
.02.
21
CALIFORNIA ACCENT LIGHTING, INC. | calilighting.com
LLED8350-WRC
LLED8350-LSR
LLED8350-WRCR
LLED8350-LSR LLED8350-LSR LLED8350-LSR
LLED8350 LLED8350 LLED8350
APPLICATIONS
Accent Lighting
Cove Lighting
Field Curveable Lighting
Mirror Lighting
Direct View Lighting
Wall Grazing
LLED8350-UC LLED8350-CMW LLED8350-LW
LLED8350
LLED8350-LSRLLED8350-WRCR
2019
.02.
21
800.921.CALI | CALIFORNIA ACCENT LIGHTING, INC.
APPLICATIONS
Accent Lighting
Back Lighting Panel Lighting
Underbench Lighting
Undercounter Lighting
LLED8350-UC
LLED8350-LW
LLED8350-CMW LLED8350-LW LLED8350-CMW
LLED8350-UC LLED8350-UC
2019
.02.
21
CALIFORNIA ACCENT LIGHTING, INC. | calilighting.com
Irvine Spectrum, Irvine, CA. Designed by LPA, Inc.
2019
.02.
21
CALIFORNIA ACCENT LIGHTING, INC.2820 E. Gretta Lane, Anaheim, CA 92806ph. 800.921.CALI or 714.535-7900 | fx. [email protected] | calilighting.com© CALI. All rights reserved. CALI reserves the right to make changes or withdraw specifications without prior notice. MA D E I N USA