Download - M04 Basic Configuration
-
8/6/2019 M04 Basic Configuration
1/20
Module - 4
Basic Configuration
Training Course
-
8/6/2019 M04 Basic Configuration
2/20
Copy Right and Disclaimer
Hidden Slide
This page is used for a disclaimer and for page alignment. Itensures that the Module Objectives are uppermost on the odd
page facing in the printed document.
-
8/6/2019 M04 Basic Configuration
3/20
Module Objectives
On completion of this module, course participants should
be able to understand the basic configuration proceduresrequired to prepare a system for installation and
alignment.
-
8/6/2019 M04 Basic Configuration
4/20
Module Objectives
Hidden Slide
This is actually the Table of Contents text page, but the clientdoes not wish the TOC details to appear in the TOC, hence the
reuse of the previous slide title (Module Objectives). The LC
will not include repeat title slides in the TOC
-
8/6/2019 M04 Basic Configuration
5/20
Lesson: Radio Bands & Frequency Channels
Lesson Objectives
On successful completion of this lesson, you will understand:
The terms radio band, frequency bank and frequency channel
How to configure the radio band
How to configure the frequency channel
-
8/6/2019 M04 Basic Configuration
6/20
- Defining the Frequency Parameters
TxLow frequencies TxHigh frequencies
Frequency Bank Frequency Bank
Radio Band
Frequency Channels etsi 23a_56
22
07
8
221
90
22
30
2
22414
22
52
6
23086
23
198
23356
221
34
2224
6
22
358
23
142
23
25
4
2247
0
23
46
4
23
422
23
47
8
2353
4
1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9
-
8/6/2019 M04 Basic Configuration
7/20
- Explaining the Frequency Parameters
Manufactured to operate in specific bands Limited bands available for selection
Configured same at both ends of link
Frequency bank automatically determined by radio part
number (different at each end of link) One unit - Transmit on high frequency (TxH) Receive on low
frequency Other unit - Transmit on low frequency (TxL) - Receive on high
frequency
Frequency channel selected from those available in bank
both transmit and receive frequencies are configured
-
8/6/2019 M04 Basic Configuration
8/20
-
8/6/2019 M04 Basic Configuration
9/20
Lesson: System Mode and System Speed
Lesson Objectives
On successful completion of this lesson, you will understand:
The function of the system mode parameter
How to configure the system speed
-
8/6/2019 M04 Basic Configuration
10/20
- Explaining the System Mode and Speed
Licensed Speed
Purchased speed keySystem Speed Freely configurable up to the licensed speed
Maximum Speed
Licensed speed Limited by channel bandwidth and modulation scheme
System modes available limited by selected radio band Determine throughput
Channel bandwidth
Modulation scheme
-
8/6/2019 M04 Basic Configuration
11/20
- Configuring the System Mode & System Speed
System mode
get system mode Displays current and other possible modes
Examples for 18 GHz, 50 MHz channel spacing:
hc50_67_qpsk
hc50_110_16qam
hc50_171_32qam set system mode
System Speed set system speed
= MHz in 1 MHz increments
-
8/6/2019 M04 Basic Configuration
12/20
- Configuring the System Mode & System Speed
Hidden slide
-
8/6/2019 M04 Basic Configuration
13/20
Lesson: IP Address Parameters
Lesson Objectives
On successful completion of this lesson, you will understand:
How to configure the IP address parameters
-
8/6/2019 M04 Basic Configuration
14/20
- Changing the IP Address Parameters
Steps
set ip address 192.168.10.100 set subnet mask 255.255.0.0
set default gateway 192.168.10.1
save mib
reset system
CLI command demonstration
-
8/6/2019 M04 Basic Configuration
15/20
-
8/6/2019 M04 Basic Configuration
16/20
- Types of Account
Super User
Full access and configuration privileges 1
NOC User Most access and configuration privileges
5Admin User Some access and configuration privileges
50
-
8/6/2019 M04 Basic Configuration
17/20
- Configuring Super User Account
Super User
Default name energetic Default password wireless
No noc or admin accounts are configured by default
set super user follow the prompts
For any account type Any errors in entering names or passwords
System responds : NAK
-
8/6/2019 M04 Basic Configuration
18/20
- Configuring NOC and Admin User Accounts
Must be logged in as the Super User
get user accounts Displays a list of all NOC and Admin account names andpasswords
Adding or editing a NOC User set noc user
Follow the prompts
Up to 5 noc users Use the index (1 5) to select specific noc user account
Adding or editing an Admin User
set admin user Follow the prompts
Up to 50 admin users Use the index (1 50) to select specific admin user account
-
8/6/2019 M04 Basic Configuration
19/20
Module Summary
The following points have been covered in this module:
Radio bandsFrequency channel
System mode
IP address parameters
User accounts
-
8/6/2019 M04 Basic Configuration
20/20