Download - LTE Capacity Areas
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 1
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 2
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 4
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 5
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 6
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 7
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 8
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 9
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 10
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 11
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 12
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 13
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 14
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 15
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 16
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 17
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 18
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 19
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 20
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 21
A regular cell is paired with additional logical cell serving the same site sector.
This dependency could be bi-directional – this first cell could play a role of secondary cell as well.
Pcell and SCell have to be collocated with each other
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 22
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 23
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 24
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 25
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 26
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 27
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 28
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 29
RL30: Operator specific CQI (LTE418): 21 new QCIs configurable in the range from 128 to 254. Better user and service differentiation for non-GBR services, e.g. bronze, silver and gold users. Operator specific QCIs can be used as well in case of RAN sharing to define a set of QCIs dedicated for each operator
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 30
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 31
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 32
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 33
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 34
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 35
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 36
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 37
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 38
Live cell data taken 09.07.13,08:00
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 39
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 40
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 41
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 42
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 43
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 44
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 45
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 46
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 47
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 48
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 49
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 50
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 51
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 52
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 53
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 54
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 55
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 56
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 57
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 58
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 59
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 60
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 61
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 62
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 63
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 64
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 65
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 66
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 67
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 68
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 69
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 70
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 71
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 72
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 73
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 74
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 75
Purpose ATB is to provide RB for UL.
It is completely different from DL as there is no Power C in DL but in UL. In RL20:So the less power the UE has, the less RB will be provided in order maintain the SINR at the eNB. Now in RL30 with EULA it has changed due to Shannons theorem, the bandwidth is maintained for longer and the MCS is downgraded first and then the bandwidth is reduced.
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 76
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 77
PPUSCH (i) :PUSCH Power in subframe i
PCMAX: max. allowed UE power (23 dBm for class 3)
MPUSCH: number of scheduled RBs (The UE Tx. Power increases proportionally to # of PRBs)
PO_PUSCH(j) = PO_NOMINAL_PUSCH(j) + PO_UE_PUSCH(j)
PL: pathloss [dB] = referenceSignalPower – higher layer filtered RSRP
DTF (i) = 10 log 10 (2MPR Ks – 1) for Ks = 1.25 else 0, MPR = TBS/NRE, NRE : number of RE
Ks defined by deltaMCS-Enabled, UE specific
f(i): TPC (Closed Loop adjustment)
Semi-persistant: j=0 / dynamic scheduling: j=1
PO_NOMINAL_PUSCH(0,1): cell specific (SysInfo)
PO_UE_PUSCH(0,1): UE specific (RRC)
a (0,1) = 0.0, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0 (partial PL compensation by open loop)
Random access grant: j=2
PO_NOMINAL_PUSCH(2): PO_PRE + DPreamble_Msg3 PO_UE_PUSCH(2) = 0
a (2) = 1.0 (i.e. full PL compensation)
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 78
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 79
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 80
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 81
UL AMC (Adaptive Modulation and Coding)
UL ATB (Adaptive Transmission Bandwidth)
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 82
PHR: Power Headroom Report
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 83
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 84
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 85
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 86
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 87
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 88
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 89
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 90
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 91
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 92
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 93
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 94
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 95
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 96
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 97
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 98
•DL adaptive closed loop MIMO (4x2) supports Transmit Diversity for 4 antenna ports in Transmission Mode 4 (TM4) and in Transmission Mode 2 (TM2).
•3GPP has specified open loop Transmit Diversity using one codeword: Precoding Feedback and Rank Information is not required!
•Transmit Diversity using 4 antenna ports is used whenever there is no valid, complete and consistent Channel State Information available as detected by eNodeB.
•During Initialization when RRC setup is performed
•No update of valid CSI reports for single layer (RI=1) and dual layer (RI=2) transmissions since a characteristic update time.
•UE does not send valid reports (e.g. Category 1 UEs).
Transmit Diversity for 4 antenna ports is implemented as a combination of SFBC (Space Frequency Block Coding) with FSTD (Frequency Switched Time Diversity).
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 99
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 100
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 101
CQI Filter:
- For Diversity (Report with Rank = 1) newCQI = WIDEBAND_CQI_Stream1 + DELTA_CQI*rdMimoOllaUsedXX.
-For Spatial Multiplexing (Report with Rank = 2) newCQI = (WIDEBAND_CQI_Stream1 + WIDEBAND_CQI_Stream2) / 2 + mimoCqiCompSmDivXX + DELTA_CQI*rdMimoOllaUsedXX.
During times on inactivity, also the CQI filter shall be slightly modified to provide a slow and seamless movement towards Diversity Mode independent from mimoXXCqiAvg settings. For every TTI mimoCQI(t) is decreased by:
mimoCQI(t) = rdMimoCqiAgeing *mimoCQI(t-1)
Averaging:
mimoCQI(t) = (1-mimoXXCqiAvg)*mimoCQI(t-1) + mimoXXCqiAvg*newCQI.
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 102
2 codewords are the 3GPP max – Ack/Nck and CQI are per codeword – 2 CW gives an optimum overhead.
Even with high order layers (say 8x8) still only 2 CW but we are sending the codewords much faster!
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 103
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 104
Perform Attach, then start download by using Jperf with fixed 2 Mbps (1UE). Make sure good radio condition of UE during this test for both CQI and SINR value in order to fulfill MIMO condition.
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 105
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 106
Perform Attach, then start download by using Jperf with fixed 2 Mbps (1UE). Make sure good radio condition of UE during this test for both CQI and SINR value. Increase attenuator of Ant1 to be 100dB to simulate TX DIV condition.
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 107
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 108
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 109
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 110
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 111
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 112
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 113
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 114
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 115
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 116
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 117
PPUSCH (i) :PUSCH Power in subframe i
PCMAX: max. allowed UE power (23 dBm for class 3)
MPUSCH: number of scheduled RBs (The UE Tx. Power increases
proportionally to # of PRBs)
PO_PUSCH(j) = PO_NOMINAL_PUSCH(j) + PO_UE_PUSCH(j)
PL: pathloss [dB] = referenceSignalPower – higher layer filtered
RSRP
DTF (i) = 10 log 10 (2MPR Ks – 1) for Ks = 1.25 else 0, MPR = TBS/NRE,
NRE : number of RE
Ks defined by deltaMCS-Enabled, UE specific
f(i): TPC (Closed Loop adjustment)
Semi-persistant: j=0 / dynamic scheduling: j=1
PO_NOMINAL_PUSCH(0,1): cell specific (SysInfo)
PO_UE_PUSCH(0,1): UE specific (RRC)
a (0,1) = 0.0, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0 (partial PL compensation
by open loop)
Random access grant: j=2
PO_NOMINAL_PUSCH(2): PO_PRE + DPreamble_Msg3 PO_UE_PUSCH(2) = 0
a (2) = 1.0 (i.e. full PL compensation)
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 118
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 119
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 120
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 121
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 122
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 123
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 124
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 125
LTE786 modifies the receiver at the eNodeB. The blanked PUCCH PRBs are not received, therefore they do not influence the received SINR. This means that the blanked resources do not contribute to the PUCCH RSSI nor SINR statistics, the measurements of the PUSCH RSSI and SINR are performed on the reduced amount of PRBs
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 126
LTE786 modifies the receiver at the eNodeB. The blanked PUCCH PRBs are not received, therefore they do not influence the received SINR. This means that the blanked resources do not contribute to the PUCCH RSSI nor SINR statistics, the measurements of the PUSCH RSSI and SINR are performed on the reduced amount of PRBs
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 127
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 128
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 129
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 130
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 131
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 132
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 133
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 134
See also PDCCH link adaption
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 135
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 136
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 137
Test Scenario : Perform Attach, then start download or upload by using Jperf with fixed 2 Mbps (1UE) then verify PM counters
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 138
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 139
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 140
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 141
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 142
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 143
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 144
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 145
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 146
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 147
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 148
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 149
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 150
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 151
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 152
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 153
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 154
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 155
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 156
M8018C0 The average number of active UEs per eNB. A UE is defined as
"active" if at least a single non-GBR DRB has been succesfully configured for
it.
Updated: The arithmetical average of samples taken from the number of UEs,
having one SRB and at least one DRB established
M8018C1
Description: The maximum number of active UEs per eNB. A UE is defined as
"active" if at least a single non-GBR DRB has been successfully configured for
it.
Updated: The maximum value of the samples of UEs having one SRB and at
least one DRB established during a measurement period.
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 157
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 158
(*): 3GPP specifies also other network sharing solutions for LTE, namely
National Roaming and Gateway Core Network however those are Core based
solutions which are out of scope of this presentation
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 159
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 160
•Provides PDSCH, PUSCH resources reservation at cell level,
among up to 4 Cell Resource
Groups (CRG) → each CRG represents one or more PLMN Ids
– reservation is realized by assigning a complete TTI to one of the Cell
Resource Groups
– selection of a CRG for scheduling in a TTI is done by Weighted Round
Robin algorithm
according to a configured share
split of resources is configurable by plmnGroupShare parameter
•Introduces also reservation of Admission Control resources:
– Admission Control resources in the cell are distributed between the
Operators
according to configurable share (also plmnGroupShare is used)
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 161
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 162
RRM - Capacity Areas and Cell Resource Measurements
CT4468CEN60GLA0 163