L-DALI BACnet/DALI ControllerLDALI-ME204
buildings under control™ 1
L-DALI controllers are multifunctional devices combining constant light control and gateway functions between BACnet and DALI (Digital Addressable Lighting Interface) systems. With alarming, scheduling, and trending (AST™) the L-DALI Controller is a perfect solution for DALI lighting systems and for a smooth DALI integration into BACnet networks.
Constant Light Control
The integrated Constant Light Controller (BACnet Loop Object) handles DALI de-vices and can be used to implement advanced lighting applications.
Advanced DALI Functions
L-DALI supports selected DALI presence detectors and light sensors with DALI ballasts. A list of currently supported devices can be found on www.loytec.com.
Fluorescent lamps must be operated about 100 hours with 100 % brightness before they may be dimmed. This burn-in process is monitored by L-DALI for each lamp. After 100 hours burn-in time the lamps constant light control is enabled.
In emergency lighting systems, L-DALI can be used for testing the system. The results can be logged.
For maximum transparency in the lighting system L-DALI can record the operating hours of each lamp and also the projected energy consumption.
Defective DALI ballasts can easily be replaced directly through buttons on the L-DALI controller or via the Web interface. No software tool is necessary.
Smooth DALI integration in BACnet networks
The L-DALI Controller maps information from the DALI network to BACnet Objects to control DALI ballasts or to display operating states. L-DALI represents a DALI-Master in the DALI network which can interact with selected DALI multi-sensors in Multi-Master mode.
Network Connection
The L-DALI lineup for BACnet networks features 4 independent DALI channels. Up to 64 DALI-based luminaries per DALI channel can be controlled individually or via 16 groups. All luminaries are monitored for lamp or ballast defect.
L-DALI Controller for BACnet can be connected either to an BACnet/IP channel (Ethernet/IP) or a MS/TP channel.
The BACnet interface includes the following objects:
DOCUMENT #89021204 September 2012
DALI ballasts • Analog Output Objects• Analog Input Objects
Setting of dim values, operating parameters and configuration of light appli-cation parameters such as staircase lighting.
L-DALI BACnet/DALI ControllerLDALI-ME204
buildings under control™2
LOYTECwww.loytec.com
L-DALI
1
LINX100
L-ROC
DALI groups and DALI channels • Analog Output Objects• Analog Input Objects• Multi-State Output Objects• Accumulator Objects
Setting of dimm values, scene control, accumulated energy usage (calculated), status and health of lamps
DALI sensors • Analog Input Objects• Binary Input Objects
The device configuration is done with the integrated Web server. All data points are available in a tree structure on the integrated Web server to be displayed or set using a standard Web browser.
DALI lighting application parameters are available through the BACnet interface and can be accessed using the BACnet Operator Workstation (BOWS).
Local Data Storage, Data Provision and Reporting
L-DALI Controllers can store trend and event logs locally. For this purpose it provides 64 BACnet Trend Log Objects. In addition, trend and event logs can be read via FTP as CSV files. For long-term data storage the LWEB-801 Server with SQL database connection is available. LWEB-801 Server stores the information in its SQL database. LWEB-830 Dream Report is provided optionally for analyzing and presenting the data.
Scheduler
Scheduler and Calendar Objects can be configured and parameterized via a com-mon browser (integrated Web server). Centralized management of schedulers on one or multiple distributed L-DALI Controllers is done with the LWEB-820 Master Schedule Configurator.
Alarming
The L-DALI Controllers support BACnet alarming functionality via BACnet Notifica-tion Class Objects. Alarms are also available on the LWEB-800 visualization or via the integrated Web server. Alarm logs are stored on the device and synchronized to an available LWEB-801 Server. Alarm logs can be read via FTP as CSV file from the L-DALI Controller.
DALI Power Supply
An external DALI power supply is needed to power up the DALI network. Power supplies are available for two or up to four channel DALI networks.
Lux level and occupancy sensor values
Constant Light Controller • Loop Objects
Availablity of up to 16 constant light controller instances for each DALI chan-nel
L-DALI BACnet/DALI ControllerLDALI-ME204
buildings under control™ 3
Licht HeizungJalousien LOYTEC
Auto
Manuell
Szene 1
Szene 2
Aus
0
10
20
30
40
50
60
70
80
90
100
24 25 26~~+- DC
AC
statuspower
12-24 VAC, 3W12-35 VDC INPUT or
100Base-T
EthernetEthernet
CONFIG
IP ACT
LINKCN/IPACT
13 14 15
PROG CHANNEL ONOFF
AUTO serial
L-DALI
LOYTECwww.loytec.com
Made in Austria
DALI MasterDALI Master
BACnet DALI controller
LDALI-ME204LDALI-ME204
DALI4ACT
DALI3ACT
DALI2ACT
DALI1ACT
DA1DA2DA3DA427 28 29 30 32 33 34 35
-+MSTPMSTP
24 25 26~~+- DC
AC
statuspower
12-24 VAC, 3W12-35 VDC INPUT or
100Base-T
EthernetEthernet
CONFIG
IP ACT
LINKCN/IPACT
13 14 15
PROG CHANNEL ONOFF
AUTO serial
L-DALI
LOYTECwww.loytec.com
Made in Austria
-+MSTPMSTP LDALI-ME204LDALI-ME204DALIDALI
BACnet DALI controller
DALI4ACT
DALI3ACT
DALI2ACT
DALI1ACT
DA1DA2DA3DA427 28 29 30 32 33 34 35
159
89 100
164
6013
[.51
2][2
.362
][3
.937
]
[3.5
04]
[6.260][6.457]
Abmessungen in mm und [inch]:
Features:• DALI Light Controller featuring 4 DALI channels
• Gateway funktions for DALI integration in BACnet networks
• Supports BACnet/IP (Ethernet) or BACnet MS/TP
• Supports up to 64 DALI devices and 16 groups per DALI channel
• Integrated Constant Light Control
• Integrated Web server for the device configuration and for moni-toring of data points
• Test and assignment of the DALI devices via the Web interface
• Replacement of DALI devices without additional software tools
• DALI commissioning with unique ballast ID (GTIN/SNR)
• DALI interface IEC 62386 (Device Type Part 201-208)
• Compliant with ANSI/ASHRAE - 135-2008 and ISO 16484-5 stan-dard
• Integrated DALI protocol analyzer
• Supports periodic testing of emergency lights
• Supports lamp burn-in mode
L-DALI BACnet/DALI ControllerLDALI-ME204
LOYTEC electronics GmbH, Blumengasse 35, 1170 Vienna, Austriahttp://www.loytec.com • [email protected] • Tel.: +43-1-402 08 05-0 • Fax: +43-1-402 08 05-994
Order number ConfigurationLDALI-ME204 BACnet DALI Controller for 4 DALI channels
LDALI-PWR2-U DALI Power Supply, 85-240 V, 50/60 Hz, Output: 2 x 16 VDC, 116 mA (DALI bus)
LDALI-PWR4-U DALI Power Supply, 85-240 V, 50/60 Hz, Output: 4 x 16 VDC, 116 mA (DALI bus)
LPOW-2415B Power Supply with external power connector 24 VDC, 15 W
SpecificationsDimensions (mm) 159 x 100 x 60 (L x W x H)
Power supply 12-35 VDC / 12-24 VAC ±10 %, typ. 2 W
Interfaces 1 x Ethernet (100Base-T) BACnet/IP, HTTP, FTP
1 x BACnet MS/TP
Type LDALI-ME204
DALI-Kanal 4
Tools Configuration via Web interface with browser
Ressource limits
DALI devices per DALI channel 64 Scene Control 16 groups per DALI channel
DALI groups per DALI channel 16 Broadcast Scene 1 per DALI channel
DALI 1
DALI 2
DALI 3
DALI 4
status
LOYTECwww.loytec.com
Made in Austria
L
L-POWPower Supply
InputN 50/60 Hz
85-265VAC
LPOW-2415B
24VDC/15W+GND
85 - 240 VAC
LOYTECwww.loytec.com
Made in Austria
N
L-DALIPower Supply
L
POWER
Input50/60 Hz85-240VAC OUTPUT
DA4+ DA4-DALI 4
DALI 4x 116mA LDALI-PWR4-U
DA3+ DA3-DALI 3
DA2+ DA2-DALI 2
DA1+ DA1-DALI 1 BACnet DALI controller
LDALI-ME204LDALI-ME204MSTP-+
DALIDALI
MS/TP BACnet/IP
24 25 26~~+- DC
AC
statuspower
12-24 VAC, 3W12-35 VDC INPUT or
100Base-T
EthernetEthernet
CONFIG
IP ACT
LINKCN/IPACT
13 14 15
PROG CHANNEL ONOFF
AUTO serial
L-DALI
LOYTECwww.loytec.com
Made in Austria
-+MSTPMSTP LDALI-ME204LDALI-ME204DALIDALI
BACnet DALI controller
DALI4ACT
DALI3ACT
DALI2ACT
DALI1ACT
DA1DA2DA3DA427 28 29 30 32 33 34 35