Download - Jartel-4,5 Transmission Media- Lanjt
Nanang IsmailUIN SGD
Transmission medium and physical layer
Classes of transmission media
Guided transmission media◦ Kabel tembaga Open Wires Coaxial Twisted Pair◦ Kabel serat optik
Unguided transmission media◦ infra merah◦ gelombang radio◦ microwave: terrestrial maupun satellite
4
5
Provides a means for transmitting electro-magnetic signals through the air but do not guide them (wireless transmission)
6
Figure Electromagnetic spectrum for wireless communication
Figure Propagation methods
Sinyal berjalan melalui tiga rute◦ Gelombang tanah (Ground wave) Mengikuti contour bumi Sd 2MHz Radio AM◦ Gelombang langit (Sky wave) Amateur radio, BBC world service, Voice of America Sinyal dipantulkan dari lapisan ionosphere dari bagian
atas atmosphere (Persisnya refracted)◦ Line of sight Di atas 30Mhz Mungkin lebih dari optical line of sight krn refraction
Kecepatan glb elektromagnetik adalah fungsi dari densitas material◦ ~3 x 108 m/s dlm vakum, lebih kecil dlm materi lainnya
Glb yg bergerak dari satu medium ke medium lainnya, kecepatannya berubah◦ Menyebabkan pembelokan arah gelombang pd perbatasan◦ Mengarah ke medium yg densitasnya lebih tinggi
Index of refraction (refractive index) adalah◦ Sin(sdt kedatangan)/sin(sdt refraction)◦ Berubah dg panjang gelombang
Menyebabkan perubahan arah mendadak pd transisi antar media
Menyebabkan pembelokan gradual jika densitas medium berubah bervariasi◦ Densitas atmosphere berkurang dg ketinggian◦ Menghasilkan pembelokan ke arah bumi dari glb radio
Redaman ruang bebas (free space loss)◦ Signal menghambur dg jarak◦ Lebih besar utk frek. lebih rendah
Penyerapan atmosphere (atmospheric absorption)◦ Uap air dan oksigen menyerap sinyal radio◦ Lebih besar utk air pd 22GHz, kurang di bawah 15GHz◦ Lebih besar utk oksigen pd 60GHz, kurang di bawah 30GHz◦ Hujan dan kabut menyebarkan glb radio
Multipath◦ Lebih baik utk mendpkan line of sight jika mungkin◦ Sinyal dp dipantulkan menyebabkan sejumlah copy (duplikasi)
pd penerima◦ Mungkin tdk ada sinyal langsung sama sekali◦ Mungkin memperkuat atau menghilangkan sinyal langsung
Refraction◦ Mungkin menghasilkan partial atau total loss dari sinyal pd
penerima
Table 7.4 Bands
Band Range Propagation Application
VLF 3–30 KHz Ground Long-range radio navigation
LF 30–300 KHz Ground Radio beacons andnavigational locators
MF 300 KHz–3 MHz Sky AM radio
HF 3–30 MHz Sky Citizens band (CB),ship/aircraft communication
VHF 30–300 MHz Sky andline-of-sight
VHF TV, FM radio
UHF 300 MHz–3 GHz Line-of-sight UHF TV, cellular phones, paging, satellite
SHF 3–30 GHz Line-of-sight Satellite communication
EHF 30–300 GHz Line-of-sight Long-range radio navigation
Figure 7.19 Wireless transmission waves
Konduktor elektrik digunakan utk meradiasikan energi elektromagnetik atau mengumpulkan energi elektromagnetik
Transmission and reception are achieved by means of antennas◦ For transmission, an antenna radiates
electromagnetic radiation in the air◦ For reception, the antenna picks up
electromagnetic waves from the surrounding medium◦ Antena yg sama biasa digunakan utk kedua sisi◦ The antenna plays a key role
20
the transmitting antenna puts out a focused electromagnetic beam
the transmitting and receiving antennas must be aligned
21
Dr. Yagi and his Yagi antenna(example of directional antenna)
the transmitted signal spreads out in all directions and can be received by many antennas
In general, the higher the frequency of a signal, the more it is possible to focus it into a directional beam
22
Figure Unidirectional antennas
Daya diradiasikan pada semua arah Performansi tdk sama pada semua arah Isotropic antenna adalah (secara teoritis) titik
dalam ruang◦ Radiasi ke semua arah secara merata◦ Memberikan pola radiasi spherical
Digunakan utk microwave terrestrial dan satelit Sumber yg ditempatkan pd focus akan
menghasilkan gelombang-gelombang pantuk paralel sumbu axis◦ Menghasilkan (secara teoritis) beam paralel dari
cahaya/suara/radio Pd penerimaan, sinyal dikonsentrasikan pada
focus, dimana detektor ditempatkan
Mengukur directionality dari antena Daya output pada arah tertentu dibandingkan
dengan yg dihasilkan oleh isotropic antenna Diukur dalam decibels (dB) Kehilangan (loss) daya pada arah lain Effective area berhubungan dengan ukuran
dan bentuk◦ Kaitan dengan gain
Frequencies in the range of about 30 MHz to 40 GHz are referred to as microwave frequencies
2 GHz to 40 GHz◦ wavelength in air is 0.75cm to 15cm wavelength = velocity / frequency◦ highly directional beams are possible◦ suitable for point-to-point transmission
30 MHz to 1 GHz◦ suitable for omnidirectional applications
28
29
Microwaves are used for unicast communication such as cellular telephones, satellite networks, and wireless LANs.
Note:
31
Parabolic dish Focused beam Line of sight Telekomunikasi jarak jauh Frekuensi lebih tinggi laju data lebih tinggi
Limited to line-of-sight (LOS) transmission◦ This means that microwaves
must be transmitted in a straight line and that no obstructions can exists, such as buildings or mountains, between microwave stations.
To avoid possible obstructions, microwave antennas often are positioned on the tops of buildings, towers, or mountains
33
With no intervening obstacles, the maximum distance between antennas is
◦ d is the distance between antennas in kilometers,◦ h is the antenna height in meters◦ k is an adjustment factor to account for the fact that
microwaves are bent or refracted with the curvature of the earth k ~ 4/3
Example◦ Two antennas at a height of 100m may be as far as
82km apart
34
khd 14.7=
Long-distance telecommunication service◦ requires fewer amplifiers or repeaters than
coaxial cable◦ requires line-of-sight transmission◦ Example telephone system TV distribution
Short point-to-point links◦ Data link between local area network ◦ closed-circuit TV
35
Another apps: cellular communication, and LANs
36
Freq. Band Use Range Data Rate824 - 894 MHz Analog cell phones (AMPS) 20 km per cell 13 kbps/channel902-928 MHz License free in North America1.7 - 2.3 GHz PCS digital cell phones < 1 km per cell1.8 GHz GSM digital cell phones 16 kbps/channel2.400-2.484 GHz global license free band2.4 GHz 802.11, Lucent WaveLAN 100 m - 25 km 2 - 11 Mbps2.45 GHz Bluetooth about 10 m 1 Mbps4 - 6 GHz commercial (telecomm.) 40 - 80 km 100 MbpsInfrared short distance line of sight 5 - 100 m 1 Mbps
The higher the frequency used, the higher the potential bandwidth and therefore the higher the potential data rate
Band (GHz) | Bandwidth (MHz) | Data rate (Mbps)
2 7 126 30 9011 40 9018 220 274
37
◦ d is the distance◦ λ is the wavelength
repeaters or amplifiers may be placed farther apart for microwave systems - 10 to 100 km is typical
Attenuation increases with rainfall, especially above 10 GHz
The assignment of frequency bands is strictly regulated (http://www.postel.go.id/utama.aspx?MenuID=3&MenuItem=3)
38
24log10
=λπdL
39
Satelit adalah suatu station relay Satelit menerima pada satu frekuensi,
memperkuat atau mengulang sinyal dan transmit pd frekuensi lain
Memerlukan orbit geo-stationary◦ Tinggi 35,784km
Aplikasi◦ Televisi◦ Telepon jarak jauh◦ Private business networks
a satellite is a microwave relay station◦ link two or more ground-
based microwave transmitter/receivers (known as earth stations or ground stations)
The satellite receives transmissions on one frequency band (uplink), amplifies or repeats the signal, and transmits it on another frequency (downlink)◦ An orbiting satellite operate
on a number of frequency bands, called transponder channels
43
It is launched into an orbit above the equator at 35786 km◦ This orbit distance means that the
satellite is orbiting the earth as fast as the earth is rotating.
◦ It appears to earth stations that the satellite is stationary, thus making communications more reliable and predictable
◦ Earth stations is less expensive because they can use fixed antennas
Delay is 250 -500ms for geostationary satellites
Apps: television broadcasting and weather forecasting, and have a number of important defense and intelligence applications, VSAT
44
A Very Small Aperture Terminal (VSAT), is a two-way satellite ground station with a dish antenna that is smaller than 3 meters.
Most VSAT antennas range from 75 cm to 1.2 m.
Data rates typically range from 56 Kbit/s up to 4 Mbit/s
VSATs access satellites in geosynchronous (geostationary) orbit (to relay data from small remote earth stations (terminals) to other terminals (in mesh configurations) or master earth station "hubs" (in star configurations).
45
For small mobile personal communications terminals, a network with significantly reduced transmission and processing delay is required
Such a service could be provided by low earth orbit (LEO) and medium earth orbit (MEO) satellite systems
These systems can provide direct personal-terminal-to-personal-terminal connectivity (satellite phone services)
46
A Low Earth Orbit (LEO) typically is a circular orbit about 400 kilometers above the earth’s surface and, correspondingly, a period (time to revolve around the earth) of about 90 minutes
One of apps: to provide satellite phone services, primarily to remote areas
47
Medium Earth orbit (MEO), sometimes called intermediate circular orbit (ICO), is the region of space around the Earth above low Earth orbit (altitude of 2,000 kilometers (1,243 mi)) and below geostationary orbit (altitude of 35,786 kilometers (22,236 mi))
The most common use for satellites in this region is for navigation, such as the GPS
48
Optimum frequency range for satellite transmission is 1 - 10GHz
Below 1 GHz, there is significant noise from nature sources
About 10 GHz, the signal is severely attenuated by atmosphere
49
Typical frequency bands for
uplink/downlink usual terminology6/4 GHz C band8/7 GHz X band14/12 GHz Ku band30/20 GHz Ka band
50
Typical frequency bands for
uplink/downlink usual terminology1.6/1.5 GHz L band30/20 GHz Ka band
51
Typical frequency bands for
uplink/downlink usual terminology12 GHz Ku band
52
53
Radio waves are used for multicast communications, such as radio and television, and paging systems.
Note:
Omnidirectional Line of sight Rentan thd interferensi multipath◦ Refleksi
Aplikasi◦ Radio FM◦ Televisi UHF dan VHF
Physical description◦ omnidirectional
Applications◦ AM broadcasting Operating frequencies MF (medium frequency): 300 kHz - 3 MHz HF (high frequency): 3 MHz - 30 MHz HF is the most economic means of low information rate
transmission over long distances (e.g. > 300km)
56
A HF wave emitted from an antenna is characterized by a groundwave and a skywave components.
The groundwave follows the surface of the earth and can provide useful communication over salt water up to 1000km and over land for some 40km to 160km
The skywave transmission depends on ionosphericrefraction. ◦ Transmitted radio waves hitting the ionosphere are bent or
refracted. ◦ When they are bent sufficiently, the waves are
returned to earth at a distant location. ◦ Skywave links can be from 160km to 12800km.
57
58
FM broadcasting operating frequencies◦ VHF (very high frequency): 30 MHz - 300 MHz
TV broadcasting◦ operating frequencies: VHF UHF (ultra high frequency): 300 MHz - 3000MHz
59
60
Memodulasi cahaya infrared noncoherent Line of sight (atau refleksi) Blocked oleh dinding mis. TV remote control, IRD port
Does not penetrate walls◦ no security or interference problems
no frequency allocation issue◦ no licensing is required
Apps: Infrared Wireless LAN
62
Infrared signals can be used for short-range communication in a closed area using line-of-sight propagation.
Note:
64
Power loss : penurunan daya sinyal
Power gain : penguatan daya sinyal
Decibel : “satuan” untuk menyatakan power loss/gain◦ Decibel merupakan satuan
ukuran daya yang logaritmis◦ Pertama kali digunakan oleh
Alexander Graham Bell (satuan decibel digunakan untuk menghormati jasanya)
◦ Decibel : dB
65
Alexander Graham BellBorn 1847 - Died 1922
66
Gaing = Pout/Pin
Gain in dBgdB = 10 log (Pout/Pin)
LossL = Pin/Pout
Loss in dBLdB = 10 log (Pin/Pout)
Overall Gaing = g1*g2
Overall Gain in dBgdB = g1(dB) + g2(dB)
Contoh: - Bila daya output 10 Watt dan daya input 1 Watt,maka Gain = 10 dB
- Bila daya input 10 Watt dan daya output 1 Watt,maka Loss = 10 dB (atau Gain = -10 dB)
Rumus dB menyatakan ukuran daya Jika kita lebih tertarik akan perubahan pada
tegangan maka faktor impedansi harus dimasukkan pada perhitungan dB
ZZ log 10
VV log 20
PP log 10
out
in
in
out
in
out
+
=
=dBg
67
Sampai titik ini kita masih melihat penerapan dB untuk menyatakan perbandingan daya
Bagaimana cara menyatakan level daya absolut menggunakan dB?
68
Gunakan suatu daya referensi
Daya referensi yang banyak digunakan adalah 1 mW
Satuan dB yang dihasilkan adalah dBm
Contoh: suatu level daya 10 mW bila dinyatakan di dalam dB adalah 10 dBm
Daya referensi lain yang dapat digunakan: 1 Watt (satuan dB yang digunakan dBW)
=
=
WPP
mWPP
dBW
dBm
1 log 10
1 log 10
69
Contoh penggunaan dB
70
Daya pancar P1 = 1W atau +30 dBmGain antena = 30 dBRedaman link = 110 dBDaya diterima terima P2,dBm = +30 dBm + 30 dB –110 dB +30 dB = –20 dBmBila dinyatakan di dalam Watt P2 = 10 μW.
71
Redaman serat optik 0,5 dB/km
Daya pancar P1,dBm = 0 dBmRedaman serat optik = 0,5 dB/km, maka redaman total serat optik = 0,5*40 =20 dB Daya terima P2,dBm = 0 dBm – 20 dB = –20 dBm
Satuan lain yang biasa digunakan untuk menyatakan suatu perbadingan adalah Neper
1 Neper (Np) = 8,685889638 dB
1 dB = 0,115129254 Np
72
John Napier or Nepernicknamed Marvellous Merchiston
(1550, 1617) Penemu Logaritma