Download - ISO list 1
-
ISO 1:2002 Geometrical Product Specifications (GPS) Standard reference
temperature for geometrical product specification and verification
ISO 2:1973 Textiles Designation of the direction of twist in yarns and related
products
ISO 3:1973 Preferred numbers Series of preferred numbers
ISO 4:1997 Information and documentation Rules for the abbreviation of title words
and titles of publications
ISO 5 Photography and graphic technology Density measurements
ISO 5-1:2009 Geometry and functional notation
ISO 5-2:2009 Geometric conditions for transmittance density
ISO 5-3:2009 Spectral conditions
ISO 5-4:2009 Geometric conditions for reflection density
ISO 6:1993 Photography Black-and-white pictorial still camera negative film/process
systems Determination of ISO speed
ISO 7 Pipe threads where pressure-tight joints are made on the threads
ISO 7-1:1994 Dimensions, tolerances and designation
ISO 7-2:2000 Verification by means of limit gauges
ISO 8:1977 Documentation Presentation of periodicals
ISO 9:1995 Information and documentation Transliteration of Cyrillic characters into
Latin characters Slavic and non-Slavic languages
ISO 11:1987 Aircraft Ground pressure testing connections for pressure cabins
ISO 12:1987 Aerospace Pipelines Identification
ISO 14:1982 Straight-sided splines for cylindrical shafts with internal centering
Dimensions, tolerances and verification
ISO 15:2011 Radial bearings -- Boundary dimensions, general plan
ISO 16:1975 Acoustics Standard tuning frequency (Standard musical pitch)
ISO 17:1973 Guide to the use of preferred numbers and of series of preferred numbers
ISO 18:1981 Documentation Contents list of periodicals
ISO 21:1985 Shipbuilding Inland navigation Cable-lifters for stud-link anchor
chains
ISO 22:1991 Belt drives Flat transmission belts and corresponding pulleys
Dimensions and tolerances
ISO 23:1993 Cinematography -- Camera usage of 35 mm motion-picture film --
Specifications
-
ISO 25:1994 Cinematography -- Camera usage of 16 mm motion-picture film --
Specifications
ISO 26:1993 Cinematography -- Projector usage of 16 mm motion-picture films for
direct front projection -- Specifications
ISO 28:1976 Cinematography -- Camera usage of 8 mm Type R motion-picture film --
Specifications
ISO 29:1980 Cinematography -- Projector usage of 8 mm Type R silent motion-picture
film for direct front projection -- Specifications [Withdrawn without replacement]
ISO 31 Quantities and units [withdrawn: replaced with ISO/IEC 80000]
ISO 32:1977 Gas cylinders for medical use -- Marking for identification of content
ISO 34
ISO 34-1:2010 Rubber, vulcanized or thermoplastic -- Determination of tear strength -
- Part 1: Trouser, angle and crescent test pieces
ISO 34-2:2011 Rubber, vulcanized or thermoplastic -- Determination of tear strength -
- Part 2: Small (Delft) test pieces
ISO 35:2004 Natural rubber latex concentrate -- Determination of mechanical stability
ISO 36:2011 Rubber, vulcanized or thermoplastic -- Determination of adhesion to
textile fabrics
ISO 37:2011 Rubber, vulcanized or thermoplastic Determination of tensile stress-
strain properties
ISO 41:1980 Shipbuilding -- Inland vessels -- Covers for deck openings for pumps
[withdrawn without replacement]
ISO 43:1976 Aircraft -- Jacking pads
ISO 44:1975 Aerospace -- Lever-operated, two-position, ON/OFF switches -- Directions
of operation
ISO 45:1990 Aircraft -- Pressure refuelling connections
ISO 46:1973 Aircraft -- Fuel nozzle grounding plugs and sockets
ISO 48:2010 Rubber, vulcanized or thermoplastic -- Determination of hardness
(hardness between 10 IRHD and 100 IRHD)
ISO 49:1994 Malleable cast iron fittings threaded to ISO 7-1
ISO 50:1977 Metal pipes -- Steel sockets screwed according to ISO 7 [Withdrawn
without replacement]
ISO 53:1998 Cylindrical gears for general and heavy engineering -- Standard basic
rack tooth profile
-
ISO 54:1996 Cylindrical gears for general engineering and for heavy engineering --
Modules
ISO 55:1977 Seedlac -- Specification [Withdrawn without replacement]
ISO 57:1975 Bleached lac -- Specification [Withdrawn without replacement]
ISO 60:1977 Plastics -- Determination of apparent density of material that can be
poured from a specified funnel
ISO 61:1976 Plastics -- Determination of apparent density of moulding material that
cannot be poured from a specified funnel
ISO 62:2008 Plastics -- Determination of water absorption
ISO 63:1975 Flat transmission belts -- Lengths [Withdrawn: Replaced with ISO 22]
ISO 65:1981 Carbon steel tubes suitable for screwing in accordance with ISO 7-1
ISO 67:1981 Muscovite mica blocks, thins and films -- Grading by size [Withdrawn
without replacement]
ISO 68 ISO general-purpose screw threads Basic profile
ISO 68-1:1998 Metric screw threads
ISO 68-2:1998 Inch screw threads
ISO 69:1998 Cinematography -- 16 mm motion-picture and magnetic film -- Cutting
and perforating dimensions
ISO 70:1981 Cinematography -- 35 mm negative photographic sound record on 35 mm
motion-picture film -- Position and maximum width dimensions
ISO 71:1977 Cinematography -- 16 mm negative photographic sound record on 16
mm, 35/16 mm and 35/32 mm motion-picture film -- Positions and dimensions
ISO 74:1976 Cinematography -- Image area produced by camera aperture and
maximum projectable image area on 8 mm Type R motion-picture film -- Positions and
dimensions
ISO 75 Plastics -- Determination of temperature of deflection under load
ISO 75-1:2013 Plastics -- Determination of temperature of deflection under load -- Part
1: General test method
ISO 75-2:2013 Plastics -- Determination of temperature of deflection under load -- Part
2: Plastics and ebonite
ISO 75-3:2004 Plastics -- Determination of temperature of deflection under load -- Part
3: High-strength thermosetting laminates and long-fibre-reinforced plastics
ISO 76:2006 Rolling bearings -- Static load ratings
ISO 78 Chemistry Layouts for standards
ISO 78-2:1999 Chemistry -- Layouts for standards -- Part 2: Methods of chemical
analysis
-
ISO 78-3:1983 Chemistry -- Layouts for standards -- Part 3: Standard for molecular
absorption spectrometry
ISO 78-4:1983 Layouts for standards -- Part 4: Standard for atomic absorption
spectrometric analysis
ISO 82:1974 Steel -- Tensile testing [Withdrawn: replaced with ISO 6892-1]
ISO 83:1976 Steel -- Charpy impact test (U-notch) [Withdrawn: replaced with ISO
148-1]
ISO 86:1974 Steel -- Tensile testing of sheet and strip less than 3 mm and not less
than 0,5 mm thick [Withdrawn: replaced with ISO 6892-1]
ISO 89:1974 Steel -- Tensile testing of wire [Withdrawn: replaced with ISO 6892-1]
ISO 90 Light gauge metal containers -- Definitions and determination of dimensions
and capacities
ISO 90-1:1997 Light gauge metal containers -- Definitions and determination of
dimensions and capacities -- Part 1: Open-top cans
ISO 90-2:1997 Light gauge metal containers -- Definitions and determination of
dimensions and capacities -- Part 2: General use containers
ISO 90-3:2000 Light gauge metal containers -- Definitions and determination of
dimensions and capacities -- Part 3: Aerosol cans
ISO 91 Petroleum measurement tables
ISO 91-1:1992 Petroleum measurement tables -- Part 1: Tables based on reference
temperatures of 15 degrees C and 60 degrees F
ISO 91-2:1991 Petroleum measurement tables -- Part 2: Tables based on a reference
temperature of 20 degrees C
ISO 92:1976 Textile machinery and accessories -- Spinning machinery -- Definition of
side (left or right)
ISO 93 Textile machinery and accessories -- Cylindrical sliver cans
ISO 93-1:2006 Textile machinery and accessories -- Cylindrical sliver cans -- Part 1:
Main dimensions
ISO 93-2:2006 Textile machinery and accessories -- Cylindrical sliver cans -- Part 2:
Spring bottoms
ISO 94:1982 Textile machinery and accessories -- Spindle gauges for ring-spinning and
ring-doubling frames
ISO 96 Textile machinery and accessories -- Rings and travellers for ring spinning and
ring twisting frames
ISO 96-1:2009 Textile machinery and accessories -- Rings and travellers for ring
spinning and ring twisting frames -- Part 1: Flange rings T and SF and their travellers
-
ISO 96-2:2009 Textile machinery and accessories -- Rings and travellers for ring
spinning and ring twisting frames -- Part 2: HZ- and J-rings and their travellers
ISO 97:1975 Textile machinery and accessories -- Rings for spinning, doubling and
twisting for ear-shaped travellers
ISO 98:2001 Textile machinery and accessories -- Spinning preparatory and spinning
machinery -- Main dimensions of coverings for top rollers
ISO 100:1984 Pulleys for flat transmission belts -- Crowns [Withdrawn: replaced with
ISO 22]
ISO 102:1990 Aircraft -- Gravity filling orifices
ISO 104:2002 Rolling bearings -- Thrust bearings -- Boundary dimensions, general
plan
ISO 105 Textiles Tests for colour fastness
ISO 105-A01:2010 Part A01: General principles of testing
ISO 105-A02:1993 Part A02: Grey scale for assessing change in colour
ISO 105-A03:1993 Part A03: Grey scale for assessing staining
ISO 105-A04:1989 Part A04: Method for the instrumental assessment of the degree of
staining of adjacent fabrics
ISO 105-A05:1996 Part A05: Instrumental assessment of change in colour for
determination of grey scale rating
ISO 105-A06:1995 Part A06: Instrumental determination of 1/1 standard depth of
colour
ISO 105-A08:2001 Part A08: Vocabulary used in colour measurement
ISO 105-A11:2012 Part A11: Determination of colour fastness grades by digital
imaging techniques
ISO 105-B01:1994 Part B01: Colour fastness to light: Daylight
ISO 105-B02:2013 Part B02: Colour fastness to artificial light: Xenon arc fading lamp
test
ISO 105-B03:1994 Part B03: Colour fastness to weathering: Outdoor exposure
ISO 105-B04:1994 Part B04: Colour fastness to artificial weathering: Xenon arc fading
lamp test
ISO 105-B05:1993 Part B05: Detection and assessment of photochromism
ISO 105-B06:1998 Part B06: Colour fastness and ageing to artificial light at high
temperatures: Xenon arc fading lamp test
ISO 105-B07:2009 Part B07: Colour fastness to light of textiles wetted with artificial
perspiration
ISO 105-B08:1995 Part B08: Quality control of blue wool reference materials 1 to 7
-
ISO 105-B10:2011 Part B10: Artificial weathering -- Exposure to filtered xenon-arc
radiation
ISO 105-C06:2010 Part C06: Colour fastness to domestic and commercial laundering
ISO 105-C07:1999 Part C07: Colour fastness to wet scrubbing of pigment printed
textiles
ISO 105-C08:2010 Part C08: Colour fastness to domestic and commercial laundering
using a non-phosphate reference detergent incorporating a low-temperature bleach
activator
ISO 105-C09:2001 Part C09: Colour fastness to domestic and commercial laundering --
Oxidative bleach response using a non-phosphate reference detergent incorporating a
low temperature bleach activator
ISO 105-C10:2006 Part C10: Colour fastness to washing with soap or soap and soda
ISO 105-C12:2004 Part C12: Colour fastness to industrial laundering
ISO 105-D01:2010 Part D01: Colour fastness to drycleaning using perchloroethylene
solvent
ISO 105-D02:1993 Part D02: Colour fastness to rubbing: Organic solvents
ISO 105-E01:2013 Part E01: Colour fastness to water
ISO 105-E02:2013 Part E02: Colour fastness to sea water
ISO 105-E03:2010 Part E03: Colour fastness to chlorinated water (swimming-pool
water)
ISO 105-E04:2013 Part E04: Colour fastness to perspiration
ISO 105-E05:2010 Part E05: Colour fastness to spotting: Acid
ISO 105-E06:2006 Part E06: Colour fastness to spotting: Alkali
ISO 105-E07:2010 Part E07: Colour fastness to spotting: Water
ISO 105-E08:1994 Part E08: Colour fastness to hot water
ISO 105-E09:2010 Part E09: Colour fastness to potting
ISO 105-E10:1994 Part E10: Colour fastness to decatizing
ISO 105-E11:1994 Part E11: Colour fastness to steaming
ISO 105-E12:2010 Part E12: Colour fastness to milling: Alkaline milling
ISO 105-E13:1994 Part E13: Colour fastness to acid-felting: Severe
ISO 105-E14:1994 Part E14: Colour fastness to acid-felting: Mild
ISO 105-E16:2006 Part E16: Colour fastness to water spotting on upholstery fabrics
-
ISO 105-F01:2001 Part F01: Specification for wool adjacent fabric
ISO 105-F02:2009 Part F02: Specification for cotton and viscose adjacent fabrics
ISO 105-F03:2001 Part F03: Specification for polyamide adjacent fabric
ISO 105-F04:2001 Part F04: Specification for polyester adjacent fabric
ISO 105-F05:2001 Part F05: Specification for acrylic adjacent fabric
ISO 105-F06:2000 Part F06: Specification for silk adjacent fabric
ISO 105-F07:2001 Part F07: Specification for secondary acetate adjacent fabric
ISO 105-F09:2009 Part F09: Specification for cotton rubbing cloth
ISO 105-F10:1989 Part F10: Specification for adjacent fabric: Multifibre
ISO 105-G01:1993 Part G01: Colour fastness to nitrogen oxides
ISO 105-G02:1993 Part G02: Colour fastness to burnt-gas fumes
ISO 105-G03:1993 Part G03: Colour fastness to ozone in the atmosphere
ISO 105-G04:1989 Part G04: Colour fastness to oxides of nitrogen in the atmosphere
at high humidities
ISO 105-J01:1997 Part J01: General principles for measurement of surface colour
ISO 105-J02:1997 Part J02: Instrumental assessment of relative whiteness
ISO 105-J03:2009 Part J03: Calculation of colour differences
ISO 105-J05:2007 Part J05: Method for the instrumental assessment of the colour
inconstancy of a specimen with change in illuminant (CMCCON02)
ISO 105-N01:1993 Part N01: Colour fastness to bleaching: Hypochlorite
ISO 105-N02:1993 Part N02: Colour fastness to bleaching: Peroxide
ISO 105-N03:1993 Part N03: Colour fastness to bleaching: Sodium chlorite (mild)
ISO 105-N04:1993 Part N04: Colour fastness to bleaching: Sodium chlorite (severe)
ISO 105-N05:1993 Part N05: Colour fastness to stoving
ISO 105-P01:1993 Part P01: Colour fastness to dry heat (excluding pressing)
ISO 105-P02:2002 Part P02: Colour fastness to pleating: Steam pleating
ISO 105-S01:1993 Part S01: Colour fastness to vulcanization: Hot air
ISO 105-S02:1993 Part S02: Colour fastness to vulcanization: Sulfur monochloride
ISO 105-S03:1993 Part S03: Colour fastness to vulcanization: Open steam
ISO 105-X01:1993 Part X01: Colour fastness to carbonizing: Aluminium chloride
ISO 105-X02:1993 Part X02: Colour fastness to carbonizing: Sulfuric acid
-
ISO 105-X04:1994 Part X04: Colour fastness to mercerizing
ISO 105-X05:1994 Part X05: Colour fastness to organic solvents
ISO 105-X06:1994 Part X06: Colour fastness to soda boiling
ISO 105-X07:1994 Part X07: Colour fastness to cross-dyeing: Wool
ISO 105-X08:1994 Part X08: Colour fastness to degumming
ISO 105-X09:1993 Part X09: Colour fastness to formaldehyde
ISO 105-X10:1993 Part X10: Assessment of migration of textile colours into polyvinyl
chloride coatings
ISO 105-X11:1994 Part X11: Colour fastness to hot pressing
ISO 105-X12:2001 Part X12: Colour fastness to rubbing
ISO 105-X13:1994 Part X13: Colour fastness of wool dyes to processes using chemical
means for creasing, pleating and setting
ISO 105-X14:1994 Part X14: Colour fastness to acid chlorination of wool: Sodium
dichloroisocyanurate
ISO 105-X16:2001 Part X16: Colour fastness to rubbing -- Small areas
ISO 105-X18:2007 Part X18: Assessment of the potential to phenolic yellowing of
materials
ISO 105-Z01:1993 Part Z01: Colour fastness to metals in the dye-bath: Chromium
salts
ISO 105-Z02:1993 Part Z02: Colour fastness to metals in the dye-bath: Iron and
copper
ISO 105-Z03:1996 Part Z03: Intercompatibility of basic dyes for acrylic fibres
ISO 105-Z04:1995 Part Z04: Dispersibility of disperse dyes
ISO 105-Z05:1996 Part Z05: Determination of the dusting behaviour of dyes
ISO 105-Z06:1998 Part Z06: Evaluation of dye and pigment migration
ISO 105-Z07:1995 Part Z07: Determination of application solubility and solution
stability of water-soluble dyes
ISO 105-Z08:1995 Part Z08: Determination of solubility and solution stability of
reactive dyes in the presence of electrolytes
ISO 105-Z09:1995 Part Z09: Determination of cold water solubility of water-soluble
dyes
ISO 105-Z10:1997 Part Z10: Determination of relative colour strength of dyes in
solution
ISO 105-Z11:1998 Part Z11: Evaluation of speckiness of colorant dispersions
-
ISO 108:1976 Textile machinery and accessories -- Weaving looms -- Definition of left
and right sides
ISO 109:1982 Textile machinery -- Working widths of weaving machines
ISO 110:1978 Textile machinery and accessories -- Cones for yarn winding (cross
wound) -- Half angle of the cone 9 degrees 15' [Withdrawn without replacement]
ISO 111:1978 Textile machinery and accessories -- Cones for yarn winding (cross
wound) -- Half angle of the cone 4 degrees 20' [Withdrawn: Replaced with ISO 8489-3]
ISO 112:1983 Textile machinery and accessories -- Cones for yarn winding (cross
wound) -- Half angle of the cone 3 degrees 30' [Withdrawn: Replaced with ISO 8489-2]
ISO 113:2010 Rolling bearings -- Plummer block housings -- Boundary dimensions
ISO 114:1980 99.8 Unalloyed magnesium ingots -- Chemical composition [Withdrawn:
Replaced by ISO 8287]
ISO 115:2003 Unalloyed aluminium ingots for remelting -- Classification and
composition
ISO 119:1977 Plastics -- Phenol-formaldehyde mouldings -- Determination of free
phenols -- Iodometric method
ISO 120:1977 Plastics -- Phenol-formaldehyde mouldings -- Determination of free
ammonia and ammonium compounds -- Colorimetric comparison method
ISO 121:1980 Magnesium-aluminium-zinc alloy ingots and alloy castings -- Chemical
composition and mechanical properties of sand cast reference test bars [Withdrawn:
replaced by ISO 16220]
ISO 123:2001 Rubber latex -- Sampling
ISO 124:2011 Latex, rubber -- Determination of total solids content
ISO 125:2011 Natural rubber latex concentrate -- Determination of alkalinity
ISO 126:2005 Natural rubber latex concentrate -- Determination of dry rubber content
ISO 127:2012 Rubber, natural latex concentrate -- Determination of KOH number
ISO 128
ISO 128-1:2003 Technical drawings -- General principles of presentation -- Part 1:
Introduction and index
ISO 128-15:2013 Technical product documentation (TPD) -- General principles of
presentation -- Part 15: Presentation of shipbuilding drawings
ISO 128-20:1996 Technical drawings -- General principles of presentation -- Part 20:
Basic conventions for lines
-
ISO 128-21:1997 Technical drawings -- General principles of presentation -- Part 21:
Preparation of lines by CAD systems
ISO 128-22:1999 Technical drawings -- General principles of presentation -- Part 22:
Basic conventions and applications for leader lines and reference lines
ISO 128-23:1999 Technical drawings -- General principles of presentation -- Part 23:
Lines on construction drawings
ISO 128-24:1999 Technical drawings -- General principles of presentation -- Part 24:
Lines on mechanical engineering drawings
ISO 128-25:1999 Technical drawings -- General principles of presentation -- Part 25:
Lines on shipbuilding drawings
ISO 128-30:2001 Technical drawings -- General principles of presentation -- Part 30:
Basic conventions for views
ISO 128-34:2001 Technical drawings -- General principles of presentation -- Part 34:
Views on mechanical engineering drawings
ISO 128-40:2001 Technical drawings -- General principles of presentation -- Part 40:
Basic conventions for cuts and sections
ISO 128-44:2001 Technical drawings -- General principles of presentation -- Part 44:
Sections on mechanical engineering drawings
ISO 128-50:2001 Technical drawings -- General principles of presentation -- Part 50:
Basic conventions for representing areas on cuts and sections
ISO/TS 128-71:2010 Technical product documentation (TPD) -- General principles of
presentation -- Part 71: Simplified representation for mechanical engineering drawings
ISO 129
ISO 129-1:2004 Technical drawings -- Indication of dimensions and tolerances -- Part
1: General principles
ISO 129-4:2013 Technical product documentation (TPD) -- Indication of dimensions
and tolerances -- Part 4: Dimensioning of shipbuilding drawings
ISO 131:1979 Acoustics -- Expression of physical and subjective magnitudes of sound
or noise in air [Withdrawn without replacement]
ISO 132:2011 Rubber, vulcanized or thermoplastic -- Determination of flex cracking
and crack growth (De Mattia)
ISO 133:1983 Rubber, vulcanized -- Determination of crack growth (De Mattia)
[Withdrawn: Replaced with ISO 132]
ISO 136:1972 Steel -- Simple torsion testing of wire [Withdrawn replaced by ISO
7800]
ISO 137:1975 Wool -- Determination of fibre diameter -- Projection microscope
method
-
ISO 139:2005 Textiles -- Standard atmospheres for conditioning and testing
ISO 140 Acoustics -- Measurement of sound insulation in buildings and of building
elements
ISO 140-2:1991 Part 2: Determination, verification and application of precision data
ISO 140-4:1998 Part 4: Field measurements of airborne sound insulation between
rooms
ISO 140-5:1998 Part 5: Field measurements of airborne sound insulation of faade
elements and faades
ISO 140-7:1998 Part 7: Field measurements of impact sound insulation of floors
ISO 140-14:2004 Part 14: Guidelines for special situations in the field
ISO 140-18:2006 Part 18: Laboratory measurement of sound generated by rainfall on
building elements
ISO 141:1976 Textile machinery and accessories -- Pirn winders and cross winders --
Definition of left and right sides
ISO 142:1976 Textile machinery and accessories -- Weaving preparatory machines --
Definition of left and right sides
ISO 143:1977 Textile machinery and accessories -- Weft pirns for automatic looms
[Withdrawn without replacement]
ISO 144:1973 Steel -- Reverse bend testing of wire [Withdrawn: replaced with ISO
7801]
ISO 146:1984 Metallic materials -- Hardness test -- Verification of Vickers hardness
testing machines HV 0,2 to HV 100 [Withdrawn replaced with ISO 6507-2]
ISO 146-2:1993 Metallic materials -- Verification of Vickers hardness testing machines
-- Part 2: Less than HV 0,2 [Withdrawn replaced with ISO 6507-2]
ISO 148 Metallic materials -- Charpy pendulum impact test
ISO 148-1:2009 Part 1: Test method
ISO 148-2:2008 Part 2: Verification of testing machines
ISO 148-3:2008 Part 3: Preparation and characterization of Charpy V-notch test pieces
for indirect verification of pendulum impact machines
ISO 150:2006 Raw, refined and boiled linseed oil for paints and varnishes --
Specifications and methods of test
ISO 155:1998 Belt drives -- Pulleys -- Limiting values for adjustment of centres
ISO 156:1982 Metallic materials -- Hardness test -- Verification of Brinell hardness
testing machines [Withdrawn replaced by ISO 6506-2]
ISO 157:1996 Coal -- Determination of forms of sulfur
-
ISO 160:1980 Asbestos-cement pressure pipes and joints [Withdrawn without
replacement]
ISO 161 Thermoplastics pipes for the conveyance of fluids -- Nominal outside
diameters and nominal pressures
ISO 161-1:1996 Part 1: Metric series
ISO 161-2:1996 Part 2: Inch-based series
ISO 162:1985 Cinematography -- Head gaps and sound records for three-, four-, or
six-track magnetic sound records on 35 mm and single-track on 17,5 mm motion-
picture film containing no picture -- Positions and width dimensions
ISO 171:1980 Plastics -- Determination of bulk factor of moulding materials
ISO 172:1978 Plastics -- Phenol-formaldehyde mouldings -- Detection of free ammonia
ISO 174:1974 Plastics -- Homopolymer and copolymer resins of vinyl chloride --
Determination of viscosity number in dilute solution [Withdrawn replaced by ISO 1628-
2]
ISO 216:2007 Writing paper and certain classes of printed matter Trimmed sizes A
and B series, and indication of machine direction
ISO 226:2003 Acoustics Normal equal-loudness-level contours
ISO 228 Pipe threads where pressure-tight joints are not made on the threads
ISO 228-1:2000 Dimensions, tolerances and designation
ISO 228-2:1987 Verification by means of limit gauges
ISO 233 Information and documentation Transliteration of Arabic characters into
Latin characters[Note 3]
ISO 233-2:1993 Arabic language Simplified transliteration
ISO 233-3:1999 Persian language Simplified transliteration
ISO 259 Information and documentation Transliteration of Hebrew characters into
Latin characters[Note 3]
ISO 259-2:1994 Simplified transliteration
ISO 261 ISO general purpose metric screw threads General plan
ISO 262 ISO general purpose metric screw threads Selected sizes for screws, bolts
and nuts
ISO 286-1 Geometrical product specifications (GPS) ISO code system for tolerances
on linear sizes Part 1: Basis of tolerances, deviations and fits
ISO 286-2 Geometrical product specifications (GPS) ISO code system for tolerances
on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for
holes and shafts
-
ISO 361 Basic ionizing radiation symbol
ISO 500 Agricultural tractors Rear-mounted power take-off types 1, 2 and 3
ISO 518:2006 Photography Camera accessory shoes, with and without electrical
contacts, for photoflash lamps and electronic photoflash units Specification
ISO 519:1992 Photography Hand-held cameras Flash-connector dimensions
ISO 639 Codes for the representation of names of languages
ISO 639-1 Alpha-2 code
ISO 639-2 Alpha-3 code
ISO 639-3 Alpha-3 code for comprehensive coverage of languages
ISO 639-4 General principles of coding of the representation of names of languages
and related entities, and application guidelines
ISO 639-5 Alpha-3 code for language families and groups
ISO 639-6 Alpha-4 code for comprehensive coverage of language variants
ISO/IEC 646 Information technology ISO 7-bit coded character set for information
interchange
ISO 657 Hot-rolled steel sections
ISO 668 Series 1 freight containers Classification, dimensions and ratings
ISO 690 Information and documentation Guidelines for bibliographic references and
citations to information resources
ISO 704 Terminology work Principles and methods
ISO 732 Photography 120-size and 220-size films Dimensions
ISO 764 Horology Magnetic resistant watches
ISO 760:1978 Determination of water - Karl Fischer method (General method)
ISO 787 General methods of test for pigments and extenders
ISO 787-9:1981 Determination of pH value of an aqueous suspension
ISO 838 Paper Holes for general filing purposes Specifications
ISO 843:1997 Information and documentation Conversion of Greek characters into
Latin characters
ISO 860 Terminology work Harmonization of concepts and terms
ISO 898 Mechanical properties of fasteners made of carbon steel and alloy steel[Note
3]
ISO 898-1 Bolts, screws and studs with specified property classes Coarse thread and
fine pitch thread
ISO 898-2 Nuts with specified proof load values Coarse thread
-
ISO 898-5 Set screws and similar threaded fasteners not under tensile stresses
ISO 898-6 Nuts with specified proof load values Fine pitch thread
ISO 898-7 Torsional test and minimum torques for bolts and screws with nominal
diameters 1 mm to 10 mm
ISO 965 ISO general purpose metric screw threads Tolerances
ISO 965-1 Principles and basic data
ISO 965-2 Limits of sizes for general purpose external and internal screw threads
Medium quality
ISO 965-3 Deviations for constructional screw threads
ISO 965-4 Limits of sizes for hot-dip galvanized external screw threads to mate with
internal screw threads tapped with tolerance position H or G after galvanizing
ISO 965-5 Limits of sizes for internal screw threads to mate with hot-dip galvanized
external screw threads with maximum size of tolerance position h before galvanizing
ISO 999 Information and documentation Guidelines for the content, organization,
and presentation of indexes
ISO 1000 SI units and recommendations for the use of their multiples and of certain
other units [withdrawn 2009-11-17]
ISO 1004 Information processing Magnetic ink character recognition Print
specifications
ISO 1007 Photography 135-size film and magazine Specifications
ISO 1101 Geometrical Product Specifications (GPS) Geometrical tolerancing
Tolerances of form, orientation, location and run-out
ISO 1222 Photography Tripod connections
ISO 1268 Fibre-reinforced plastics Methods of producing test plates
ISO 1402 Rubber and plastics hoses and hose assemblies - Hydrostatic testing
ISO/IEC 1539 Information technology Programming languages Fortran
ISO 1629 Rubber and latices Nomenclature
ISO 1663 Rigid cellular plastics Determination of water vapour transmission
properties
ISO 1745 Information processing Basic mode control procedures for data
communication systems
ISO 1750 Pesticides and other agrochemicals Common names
ISO 1928 Solid mineral fuels Determination of gross calorific value by the bomb
calorimetric method and calculation of net calorific value
-
ISO/IEC 2022 Information technology Character code structure and extension
techniques
ISO 2108 Information and documentation International standard book number
(ISBN)
ISO 2145 Documentation Numbering of divisions and subdivisions in written
documents
ISO 2162 Technical product documentation Springs
ISO 2162-1 Simplified representation
ISO 2162-2 Presentation of data for cylindrical helical compression springs
ISO 2171 Cereals, pulses and by-products Determination of ash yield by incineration
ISO 2240:2003 Photography Colour reversal camera films Determination of ISO
speed
ISO 2533 Standard Atmosphere
ISO 2692 Geometrical product specifications (GPS) Geometrical tolerancing
Maximum material requirement (MMR), least material requirement (LMR) and
reciprocity requirement (RPR)
ISO 2709 Information and documentation Format for information exchange
ISO 2768 General tolerances
ISO 2768-1 Tolerances for linear and angular dimensions without individual tolerance
indications
ISO 2768-2 Geometrical tolerances for features without individual tolerance indications
ISO 2852 Stainless steel clamp pipe couplings for the food industry
ISO 3002 Basic quantities in cutting and grinding
ISO 3082 Iron ores Sampling and sample preparation procedures
ISO 3098 Technical product documentation Lettering
ISO 3103 Tea Preparation of liquor for use in sensory tests
ISO 3166 Codes for the representation of names of countries and their subdivisions
ISO 3166-1 Country codes
ISO 3166-2 Country subdivision code
ISO 3166-3 Code for formerly used names of countries
ISO 3297 Information and documentation International standard serial number
(ISSN)
ISO 3394 Dimensions of rigid rectangular packages Transport packages
-
ISO 3506 Mechanical properties of corrosion-resistant stainless steel fasteners
ISO 3534 Statistics Vocabulary and symbols
ISO 3534-1 General statistical terms and terms used in probability
ISO 3534-2 Applied statistics
ISO 3534-3 Design of experiments
ISO 3534-4 Survey sampling
ISO 3536 Road vehicles Safety glazing materials Vocabulary
ISO 3537 Road vehicles Safety glazing materials Mechanical tests
ISO 3538 Road vehicles Safety glazing materials Test methods for optical
properties
ISO 3601 Fluid power systems O-rings
ISO 3601-1 Inside diameters, cross-sections, tolerances and designation codes
ISO 3601-2 Housing dimensions for general applications
ISO 3601-3 Quality acceptance criteria
ISO 3601-4 Anti-extrusion rings (back-up rings)
ISO 3601-5 Suitability of elastomeric materials for industrial applications
ISO 3602 Documentation Romanization of Japanese (kana script)
ISO 3632 Spices Saffron (Crocus sativus L.)[Note 3]
ISO 3635:1981 Size designation of clothes Definitions and body measurement
procedure
ISO 3676 Packaging Unit load sizes Dimensions
ISO 3864 Graphical symbols Safety colours and safety signs
ISO 3901 Information and documentation International Standard Recording Code
(ISRC)
ISO 3977 Gas turbines Procurement
ISO 4074 Natural latex rubber condoms Requirements and test methods
ISO 4157 Construction drawings Designation systems
ISO 4157-1 Buildings and part of buildings
ISO 4157-2 Room names and numbers
ISO 4157-3 Room identifiers
ISO 4165 Road vehicles Electrical connections Double-pole connection
-
ISO 4179 Ductile iron pipes and fittings for pressure and non-pressure pipelines
Cement mortar lining
ISO 4217 Codes for the representation of currencies and funds
ISO 4314 Surface active agents Determination of free alkalinity or free acidity
Titrimetric method
ISO 4578 Adhesives Determination of peel resistance of high-strength adhesive
bonds Floating-roller method
ISO 4582 Plastics Determination of changes in colour and variations in properties
after exposure to daylight under glass, natural weathering or laboratory light sources
ISO 4587 Adhesives Determination of tensile lap-shear strength of rigid-to-rigid
bonded assemblies
ISO 4628 Paints and varnishes Evaluation of degradation of coatings Designation of
quantity and size of defects, and of intensity of uniform changes in appearance
ISO 4628-1 General introduction and designation system
ISO 4628-2 Assessment of degree of blistering
ISO 4628-3 Assessment of degree of rusting
ISO 4628-4 Assessment of degree of cracking
ISO 4628-5 Assessment of degree of flaking
ISO 4628-6 Assessment of degree of chalking by tape method
ISO 4628-7 Assessment of degree of chalking by velvet method
ISO 4628-8 Assessment of degree of delamination and corrosion around a scribe
ISO 4628-10 Assessment of degree of filiform corrosion
ISO/IEC 4873:1991 Information technology ISO 8-bit code for information
interchange Structure and rules for implementation
ISO 4892 Plastics Methods of exposure to laboratory light sources
ISO 5127 Information and documentation Vocabulary
ISO 5167 Measurement of fluid flow by means of pressure differential devices inserted
in circular cross-section conduits running full
ISO 5167-1 General principles and requirements
ISO 5167-2 Orifice plates
ISO 5167-3 Nozzles and Venturi nozzles
ISO 5167-4 Venturi tubes
ISO/IEC 5218 Information technology Codes for the representation of human sexes
-
ISO 5455 Technical drawings Scales
ISO 5457 Technical product documentation Sizes and layout of drawing sheets
ISO 5458 Geometrical Product Specifications (GPS) Geometrical tolerancing
Positional tolerancing
ISO 5459 Geometrical product specifications (GPS) Geometrical tolerancing Datums
and datum systems
ISO 5660 Reaction-to-fire tests Heat release, smoke production and mass loss rate
ISO 5660-1 Heat release rate (cone calorimeter method)
ISO 5660-2 Smoke production rate (dynamic measurement)
ISO/TS 5660-3 Guidance on measurement
ISO 5725 Accuracy (trueness and precision) of measurement methods and results
ISO 5775 Bicycle tires and rims
ISO 5776 Graphic technology - Symbols for text correction
ISO 5800:2001 Photography Colour negative films for still photography
Determination of ISO speed
ISO 5893 Rubber and plastics test equipment Tensile, flexural and compression types
(constant rate of traverse) Specification
ISO 5964 Documentation Guidelines for the establishment and development of
multilingual thesauri
ISO 5971:1981 Size designation of clothes Pantyhose
ISO 5993 Sodium hydroxide for industrial use -- Determination of mercury content --
Flameless atomic absorption spectrometric method
ISO 6107-4:1993 Water quality -- Vocabulary
ISO 6166 Securities and related financial instruments International securities
identification numbering system (ISIN)
ISO 6194 Rotary-shaft lip-type seals incorporating elastomeric sealing elements
ISO 6194-5 Identification of visual imperfections
ISO 6336 Calculation of load capacity of spur and helical gears
ISO 6344 Coated abrasives Grain size analysis
ISO 6344-1 Grain size distribution test
ISO 6344-2 Determination of grain size distribution of macrogrits P12 to P220
ISO 6344-3 Determination of grain size distribution of microgrits P240 to P2500
ISO 6357 Documentation Spine titles on books and other publications
-
ISO/IEC 6429 Information technology Control functions for coded character sets
ISO 6438 Documentation African coded character set for bibliographic information
interchange
ISO/IEC 6523 Information technology Structure for the identification of organizations
and organization parts
ISO 6579 Microbiology of food and animal feeding stuffs Horizontal method for the
detection of Salmonella spp.
ISO 6594 Cast iron drainage pipes and fittings Spigot series
ISO 6709 Standard representation of geographic point location by coordinates
ISO 6946 Building components and building elements Thermal resistance and
thermal transmittance Calculation method
ISO 7001 Graphical symbols Public information symbols
ISO 7002 Agricultural food products Layout for a standard method of sampling from
a lot
ISO 7098 Information and documentation Romanization of Chinese
ISO 7200 Technical product documentation Data fields in title blocks and document
headers
ISO 7240 Fire detection and alarm systems
ISO 7372 Trade data interchange
ISO/IEC 7498 Information technology -- Open Systems Interconnection -- Basic
Reference Model[Note 3]
ISO/IEC 7498-1 The Basic Model
ISO 7498-2 Security Architecture
ISO/IEC 7498-3 Naming and addressing
ISO/IEC 7498-4 Management framework
ISO/IEC 7501 Identification cards Machine readable travel documents
ISO/IEC 7501-1:2008 Machine readable passport
ISO/IEC 7501-2:1997 Machine readable visa
ISO/IEC 7501-3:2005 Machine readable official travel documents
ISO 7736 Road vehicles Car radio for front installation Installation space including
connections
ISO/IEC 7810 Identification cards Physical characteristics
ISO/IEC 7811 Identification cards Recording technique
ISO/IEC 7812 Identification cards Identification of issuers
-
ISO/IEC 7813 Information technology Identification cards Financial transaction
cards
ISO/IEC 7816 Identification cards Integrated circuit cards[Note 3]
ISO/IEC 7942 Information technology Computer graphics and image processing
Graphical Kernel System (GKS)
ISO 8000 Data quality
ISO 8015:2011 Geometrical product specifications (GPS) Fundamentals Concepts,
principles and rules
ISO 8090 Cycles Terminology
ISO 8180 Ductile iron pipelines Polyethylene sleeving for site application
ISO 8373 Manipulating industrial robots Vocabulary
ISO 8501 Preparation of steel substrates before application of paints and related
products Visual assessment of surface cleanliness
ISO 8559:1989 Garment construction and anthropometric surveys Body dimensions
ISO 8573 Compressed air
ISO 8573-1 Contaminants and purity classes
ISO 8573-2 Test methods for oil aerosol content
ISO 8573-3 Test methods for measurement of humidity
ISO 8573-4 Test methods for solid particle content
ISO 8573-5 Test methods for oil vapour and organic solvent content
ISO 8573-6 Test methods for gaseous contaminant content
ISO 8573-7 Test method for viable microbiological contaminant content
ISO 8573-8 Test methods for solid particle content by mass concentration
ISO 8573-9 Test methods for liquid water content
ISO 8583 Financial transaction card originated messages Interchange message
specifications
ISO 8583-1 Messages, data elements and code values
ISO 8583-2 Application and registration procedures for Institution Identification Codes
(IIC)
ISO 8583-3 Maintenance procedures for messages, data elements and code values
ISO 8601 Data elements and interchange formats Information interchange
Representation of dates and times
-
ISO/IEC 8613 Information technology Open Document Architecture (ODA) and
interchange format
ISO/IEC 8632 Information technology Computer graphics Metafile for the storage
and transfer of picture description information
ISO/IEC 8632-1 Functional specification
ISO/IEC 8632-2 Character encoding
ISO/IEC 8632-3 Binary encoding [withdrawn 2001-06-21]
ISO/IEC 8632-4 Clear text encoding
ISO 8651 Information technology Computer graphics Graphical Kernel System
(GKS) language bindings[Note 3]
ISO/IEC 8652 Information technology Programming languages Ada
ISO 8653:1986 Jewellery Ring-sizes Definition, measurement and designation
ISO 8691 Petroleum products Low levels of vanadium in liquid fuels Determination
by flameless atomic absorption spectrometry after ashing
ISO 8805 Information processing systems Computer graphics Graphical Kernel
System for Three Dimensions (GKS-3D) functional description
ISO/IEEC 8806 Information technology Computer graphics Graphical Kernel
System for Three Dimensions (GKS-3D) language bindings
ISO/IEEC 8806-4 C
ISO 8807 Information processing systems Open Systems Interconnection LOTOS
A formal description technique based on the temporal ordering of observational
behaviour
ISO/IEC 8824 Information technology Abstract Syntax Notation One (ASN.1)
ISO/IEC 8825 Information technology ASN.1 encoding rules
ISO/IEC 8859 Information technology 8-bit single-byte coded graphic character sets
ISO/IEC 8859-1 Latin alphabet No. 1
ISO/IEC 8859-2 Latin alphabet No. 2
ISO/IEC 8859-3 Latin alphabet No. 3
ISO/IEC 8859-4 Latin alphabet No. 4
ISO/IEC 8859-5 Latin/Cyrillic alphabet
ISO/IEC 8859-6 Latin/Arabic alphabet
ISO/IEC 8859-7 Latin/Greek alphabet
ISO/IEC 8859-8 Latin/Hebrew alphabet
-
ISO/IEC 8859-9 Latin alphabet No. 5
ISO/IEC 8859-10 Latin alphabet No. 6
ISO/IEC 8859-11 Latin/Thai alphabet
ISO/IEC 8859-13 Latin alphabet No. 7
ISO/IEC 8859-14 Latin alphabet No. 8 (Celtic)
ISO/IEC 8859-15 Latin alphabet No. 9
ISO/IEC 8859-16 Latin alphabet No. 10
ISO 8879 Information processing Text and office systems Standard Generalized
Markup Language (SGML)
ISO 9000 Quality management systems Fundamentals and vocabulary
ISO 9001 Quality management systems Requirements
ISO 9004 Managing for the sustained success of an organization A quality
management approach
ISO 9050 Glass in building Determination of light transmittance, solar direct
transmittance, total solar energy transmittance, ultraviolet transmittance and related
glazing factors
ISO 9069 Information processing SGML support facilities SGML Document
Interchange Format (SDIF)
ISO/IEC 9075 Information technology Database languages SQL
ISO/IEC 9126 Software engineering Product quality
ISO 9141 Road vehicles Diagnostic systems[Note 3]
ISO 9141-2 CARB requirements for interchange of digital information
ISO 9141-3 Verification of the communication between vehicle and OBD II scan tool
ISO 9241 Ergonomics of human-system interaction
ISO/IEC 9293 Information technology Volume and file structure of disk cartridges for
information interchange
ISO 9362 Banking Banking telecommunication messages Business identifier code
(BIC)
ISO 9407 Shoe sizes Mondopoint system of sizing and marking
ISO/IEC 9541 Information technology Font information interchange
ISO/IEC 9541-1:1991 Architecture
ISO/IEC 9541-2:1991 Interchange Format
ISO/IEC 9541-3:1994 Glyph shape representation
ISO/IEC 9541-4:2009 Harmonization to Open Font Format
-
ISO 9564 Financial services Personal Identification Number (PIN) management and
security[Note 3]
ISO/IEC 9579 Information technology Remote database access for SQL with security
enhancement
ISO/IEC 9592 Information technology Computer graphics and image processing
Programmer's Hierarchical Interactive Graphics System (PHIGS)
ISO/IEC 9593 Information technology Computer graphics Programmer's
Hierarchical Interactive Graphics System (PHIGS) language bindings[Note 3]
ISO/IEC 9594 Information technology Open Systems Interconnection The Directory
ISO/IEC 9636 Information technology - Computer graphics - Interfacing techniques for
dialogues with graphical devices (CGI) - Functional specification
ISO/IEC 9636-1 Overview, profiles, and conformance
ISO/IEC 9636-2 Control
ISO/IEC 9636-3 Output
ISO/IEC 9636-4 Segments
ISO/IEC 9636-5 Input and echoing
ISO/IEC 9636-6 Raster
ISO 9660 Information processing Volume and file structure of CD-ROM for
information interchange
ISO 9712 Non-destructive testing - Qualification and certification of NDT personnel
ISO/IEC 9796 Information technology Security techniques Digital signature
schemes giving message recovery
ISO/IEC 9797 Information technology Security techniques Message Authentication
Codes (MACs)
ISO/IEC 9797-1 Mechanisms using a block cipher
ISO/IEC 9797-2 Mechanisms using a dedicated hash-function
ISO/IEC 9798 Information technology Security techniques Entity authentication
ISO/IEC 9834 Information technology Open Systems Interconnection Procedures
for the operation of OSI Registration Authorities
ISO 9869 Thermal insulation Building elements In-situ measurements of thermal
resistance and thermal transmittance
ISO/IEC 9899 Programming languages C
ISO/IEC/IEEE 9945 Information technology Portable Operating System Interface
(POSIX) Base Specifications, Issue 7
-
ISO 9984 Information and documentation Transliteration of Georgian characters into
Latin characters
ISO 9985 Information and documentation Transliteration of Armenian characters into
Latin characters
ISO 9992 Financial transaction cards Messages between the integrated circuit card
and the card accepting device
ISO/IEC 9995 Information technology Keyboard layouts for text and office systems
ISO 9999 Assistive products for persons with disability Classification and terminology
ISO 10001:2007 Quality management Customer satisfaction Guidelines for codes
of conduct for organizations
ISO 10002:2014 Quality management Customer satisfaction Guidelines for
complaints handling in organizations
ISO 10003:2007 Quality management Customer satisfaction Guidelines for dispute
resolution external to organizations
ISO 10004:2008 Quality management Customer satisfaction Guidelines for
monitoring and measuring
ISO 10005:2005 Quality management systems Guidelines for quality plans
ISO 10006:2003 Quality management systems Guidelines for quality management in
projects
ISO 10007:2003 Quality management systems Guidelines for configuration
management
ISO 10012:2003 Measurement management systems Requirements for
measurement processes and measuring equipment
ISO/TR 10013:2001 Guidelines for quality management system documentation
ISO 10014:2006 Quality management Guidelines for realizing financial and economic
benefits
ISO 10015:1999 Quality management Guidelines for training
ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000
ISO 10018:2012 Quality management Guidelines on people involvement and
competence
ISO 10019:2005 Guidelines for the selection of quality management system
consultants and use of their services
ISO/IEC 10021 Information technology Message Handling Systems (MHS)
ISO/IEC 10026 Information technology Open Systems Interconnection
-
ISO 10077 Thermal performance of windows, doors and shutters Calculation of
thermal transmittance
ISO/IEC 10089 Information technology 130 mm rewritable optical disk cartridge for
information interchange
ISO/IEC 10116 Information technology Security techniques Modes of operation for
an n-bit block cipher
ISO/IEC 10118 Information technology Security techniques Hash-functions
ISO 10160 Information and documentation Open Systems Interconnection
Interlibrary Loan Application Service Definition
ISO 10161 Information and documentation Open Systems Interconnection
Interlibrary Loan Application Protocol Specification
ISO/IEC 10164 Information technology Open Systems Interconnection Systems
Management
ISO/IEC 10179:1996 Information technology Processing languages Document Style
Semantics and Specification Language (DSSSL)
ISO/IEC 10206 Information technology Programming languages Extended Pascal
ISO 10211 Thermal bridges in building construction Heat flows and surface
temperatures Detailed calculations
ISO 10218 Robots and robotic devices Safety requirements for industrial robots
ISO/IEC 10279 Information technology Programming languages Full BASIC
ISO 10303 Industrial automation systems and integration Product data
representation and exchange
ISO 10380 Pipework Corrugated metal hoses and hose assemblies
ISO 10383 Securities and related financial instruments Codes for exchanges and
market identification (MIC)
ISO 10487 Passenger cars Connections for car radios[Note 3]
ISO 10555 Sterile, single-use intravascular catheters
ISO 10579 Geometrical product specifications (GPS) Dimensioning and tolerancing
Non-rigid parts
ISO 10628 Flow diagrams for process plants
ISO/IEC 10646 Information technology Universal Coded Character Set (UCS)
ISO 10664 Hexalobular internal driving feature for bolts and screws Torx screw head
ISO/IEC 10746 Information technology - Open distributed processing
-
ISO/IEC 10746-1 Information technology - Open Distributed Processing - Reference
model: Overview
ISO/IEC 10746-2 Information technology - Open distributed processing - Reference
model: Foundations
ISO/IEC 10746-3 Information technology - Open distributed processing - Reference
model: Architecture
ISO/IEC 10746-4 Information technology - Open Distributed Processing - Reference
Model: Architectural semantics
ISO 10957 Information and documentation International standard music number
(ISMN)
ISO 10962 Securities and related financial instruments Classification of Financial
Instruments (CFI code)
ISO 10993 Biological evaluation of medical devices
ISO 10993-1 Evaluation and testing within a risk management process
ISO 10993-2 Animal welfare requirements
ISO 10993-3 Tests for genotoxicity, carcinogenicity and reproductive toxicity
ISO 10993-4 Selection of tests for interactions with blood
ISO 10993-5 Tests for in vitro cytotoxicity
ISO 10993-6 Tests for local effects after implantation
ISO 10993-7 Ethylene oxide sterilization residuals
ISO 10993-9 Framework for identification and quantification of potential degradation
products
ISO 10993-10 Tests for irritation and skin sensitization
ISO 10993-11 Tests for systemic toxicity
ISO 10993-12 Sample preparation and reference materials
ISO 10993-13 Identification and quantification of degradation products from polymeric
medical devices
ISO 10993-14 Identification and quantification of degradation products from ceramics
ISO 10993-15 Identification and quantification of degradation products from metals
and alloys
ISO 10993-16 Toxicokinetic study design for degradation products and leachables
ISO 10993-17 Establishment of allowable limits for leachable substances
ISO 10993-18 Chemical characterization of materials
-
ISO 10993-19 Physico-chemical, morphological and topographical characterization of
materials
ISO 10993-20 Principles and methods for immunotoxicology testing of medical devices
ISO 11064 Ergonomic design of control centres
ISO 11064-1:2000 Principles for the design of control centres
ISO 11064-2:2000 Principles for the arrangement of control suites
ISO 11064-3:1999 Control room layout ISO 11064-3:1999/Cor 1:2002
ISO 11064-4:2004 Layout and dimensions of workstations
ISO 11064-5:2008 Displays and controls
ISO 11064-6:2005 Environmental requirements for control centres
ISO 11064-7:2006 Principles for the evaluation of control centres
ISO 11120 Gas cylinders -- Refillable seamless steel tubes for compressed gas
transport, of water capacity between 150 l and 3000 l -- Design construction and
testing
ISO 11135:2014 Sterilization of health-care products -- Ethylene oxide --
Requirements for the development, validation and routine control of a sterilization
process for medical devices
ISO 11137 Sterilization of health care products Radiation
ISO 11170:2003 Hydraulic fluid power Filter elements Sequence of tests for
verifying performance characteristics
ISO 11171:2010 Hydraulic fluid power Calibration of automatic particle counters for
liquids
ISO/IEC 11172 Information technology Coding of moving pictures and associated
audio for digital storage media at up to about 1,5 Mbit/s
ISO/IEC 11179 Information technology Metadata registries (MDR)
ISO/IEC 11179-1:2004 Framework
ISO/IEC 11179-2:2005 Classification
ISO/IEC 11179-3:2003 Registry metamodel and basic attributes
ISO/IEC 11179-4:2004 Formulation of data definitions
ISO/IEC 11179-5:2005 Naming and identification principles
ISO/IEC 11179-6:2005 Registration
ISO 11357 Plastics Differential scanning calorimetry (DSC)
ISO 11357-1:2009 General principles
-
ISO 11357-2:2013 Determination of glass transition temperature and glass transition
step height
ISO 11357-3:2011 Determination of temperature and enthalpy of melting and
crystallization
ISO 11357-4:2005 Determination of specific heat capacity
ISO 11357-5:2013 Determination of characteristic reaction-curve temperatures and
times, enthalpy of reaction and degree of conversion
ISO 11357-6:2008 Determination of oxidation induction time (isothermal OIT) and
oxidation induction temperature (dynamic OIT)
ISO 11357-7:2002 Determination of crystallization kinetics
ISO/IEC 11404 Information technology General-Purpose Datatypes (GPD)
ISO 11446:2004 Road vehicles Connectors for the electrical connection of towing and
towed vehicles 13-pole connectors for vehicles with 12 V nominal supply voltage
ISO 11469:2000 Plastics Generic identification and marking of plastics products
ISO/IEC 11578:1996 Information technology Open Systems Interconnection
Remote procedure call (RPC)
ISO 11783 Tractors and machinery for agriculture and forestry Serial control and
communications data network
ISO/IEC 11801 Information technology Generic cabling for customer premises
ISO 11898 Road vehicles Controller area network (CAN)
ISO 12006 Building construction Organization of information about construction
works
ISO/IEC 12207 Systems and software engineering Software life cycle processes
ISO 12100 Safety of machinery General principles for design Risk assessment and
risk reduction
ISO 12639 Graphic technology Prepress digital data exchange Tag image file
format for image technology (TIFF/IT)
ISO 12641 Graphic technology Prepress digital data exchange Colour targets for
input scanner calibration
ISO/TS 12805:2011 Nanotechnologies Materials specifications Guidance on
specifying nano-objects
ISO 12859/TR Intelligent transport systems System architecture Privacy aspects in
ITS standards and systems
ISO 12944 Paints and varnishes Corrosion protection of steel structures by protective
paint systems
ISO 13007 Ceramic tiles Grouts and adhesives
-
ISO 13007-1:2014 Terms, definitions and specifications for adhesives
ISO 13007-2:2010 Test methods for adhesives
ISO 13007-3:2010 Terms, definitions and specifications for grouts
ISO 13007-4:2013 Test methods for grouts
ISO/TR 13121:2011 Nanotechnologies Nanomaterial risk evaluation
ISO 13239 Information technology Telecommunications and information exchange
between systems High-level data link control (HDLC) procedures
ISO/IEC 13249 Information technology Database languages SQL multimedia and
application
ISO/IEC 13250 Information technology Topic Maps[Note 3]
ISO 13320:2009 Particle size analysis - Laser diffraction methods
ISO/IEC 13346 Information technology Volume and file structure of write-once and
rewritable media using non-sequential recording for information interchange
ISO 13370 Thermal performance of buildings Heat transfer via the ground
Calculation methods
ISO 13406-2:2001 Ergonomic requirements for work with visual displays based on flat
panels Part 2: Ergonomic requirements for flat panel displays [withdrawn 2008-11-
14]
ISO 13450 Photography 110-size cartridge, film and backing paper Dimensions
ISO 13485:2003 Medical devices Quality management systems Requirements for
regulatory purposes
ISO/IEC 13490 Information technology Volume and file structure of read-only and
write-once compact disk media for information interchange
ISO 13567 Technical product documentation Organization and naming of layers for
CAD
ISO/IEC 13568:2002 Information Technology Z formal specification notation
Syntax, type system and semantics
ISO 13577 Industrial furnaces and associated processing equipment - Safety
ISO 13577-1 General requirements
ISO 13579 Industrial furnaces and associated processing equipment - Method of
measuring energy balance and calculating efficiency
ISO 13579-1 General methodology
ISO 13579-2 Reheating furnaces for steel
ISO 13579-3 Batch-type aluminium melting furnaces
ISO 13579-4 Furnaces with protective or reactive atmosphere
-
ISO 13586:2000 Plastics - Determination of fracture toughness (GIC and KIC) -- Linear
elastic fracture mechanics (LEFM) approach
ISO 13616 Financial services International bank account number (IBAN)
ISO 13628 Petroleum and natural gas industries Design and operation of subsea
production systems
ISO 13628-1 General requirements and recommendations
ISO 13628-2 Unbonded flexible pipe systems for subsea and marine applications
ISO 13628-3 Through flowline (TFL) systems
ISO 13628-4 Subsea wellhead and tree equipment
ISO 13628-5 Subsea umbilicals
ISO 13628-6 Subsea production control systems
ISO 13628-7 Completion/workover riser systems
ISO 13628-8 Remotely Operated Vehicle (ROV) interfaces on subsea production
systems
ISO 13628-9 Remotely Operated Tool (ROT) intervention systems
ISO 13628-10 Specification for bonded flexible pipe
ISO 13628-11 Flexible pipe systems for subsea and marine applications
ISO 13715 Technical drawingsEdges of undefined shapeVocabulary and indications
ISO 13849 Safety of machinery Safety related parts of control systems
ISO/IEC 13818 Information technology Generic coding of moving pictures and
associated audio information
ISO 13837 Road vehicles Safety glazing materials Method for the determination of
solar transmittance
ISO 14000 Environmental management systems [This is a set of standards, rather than
a single standard.]
ISO 14001:2004 Environmental management systems Requirements with guidance
for use
ISO 14004:2004 Environmental management systems General guidelines on
principles, systems and support techniques
ISO 14031 Environmental management - Environmental performance evaluation
Guidelines
ISO 14050 Environmental management Vocabulary
ISO 14051 Environmental management Material flow cost accounting - General
framework
-
ISO 14064 Greenhouse gases
ISO 14155:2011 Clinical investigation of medical devices for human subjects Good
clinical practice
ISO 14223 Radiofrequency [sic] identification of animals Advanced transponders
ISO 14224 Petroleum, petrochemical and natural gas industries - Collection and
exchange of reliability and maintenance data for equipment
ISO 14230 Road vehicles Diagnostic systems Keyword Protocol 2000
ISO 14230-1 Physical layer
ISO 14230-2 Data link layer
ISO 14230-3 Application layer
ISO 14230-4 Requirements for emission-related systems
ISO 14405-1 Geometrical product specifications (GPS) Dimensional tolerancing Part
1: Linear sizes
ISO/IEC 14443 Identification cards Contactless integrated circuit cards Proximity
cards
ISO/IEC 14462 - Open-EDI Reference Model
ISO/IEC 14496 Information technology Coding of audio-visual objects
ISO 14641 Electronic archiving
ISO 14641-1:2012 Specifications concerning the design and the operation of an
information system for electronic information preservation
ISO 14644 Cleanrooms and associated controlled environments
ISO 14644-1:1999 Classification of air cleanliness
ISO 14644-2:2000 Specifications for testing and monitoring to prove continued
compliance with ISO 14644-1
ISO 14644-3:2005 Test methods
ISO 14644-4:2001 Design, construction and start-up
ISO 14644-5:2004 Operations
ISO 14644-6:2007 Vocabulary
ISO 14644-7:2004 Separative devices (clean air hoods, gloveboxes, isolators and mini-
environments)
ISO 14644-8:2006 Classification of airborne molecular contamination
ISO/IEC 14651 Information technology International string ordering and comparison
Method for comparing character strings and description of the common template
tailorable ordering
-
ISO 14698 Cleanrooms and associated controlled environments Biocontamination
control
ISO 14698-1 General principles and methods
ISO 14698-2 Evaluation and interpretation of biocontamination data
ISO/IEC 14750 Information technology Open Distributed Processing Interface
Definition Language
ISO/IEC 14755 Information technology Input methods to enter characters from the
repertoire of ISO/IEC 10646 with a keyboard or other input device
ISO 14801 Dentistry Implants Dynamic fatigue test for endosseous dental implants
ISO 14855-1 Determination of the ultimate aerobic biodegradability of plastic materials
under controlled composting conditions Method by analysis of evolved carbon dioxide
ISO 14855-1:2005 General method
ISO 14855-2:2007 Gravimetric measurement of carbon dioxide evolved in a
laboratory-scale test
ISO/IEC 14882 Programming Languages C++
ISO 14915 Software ergonomics for multimedia user interfaces
ISO 14915-1:2002 Design principles and framework
ISO 14915-2:2003 Multimedia navigation and control
ISO 14915-3:2002 Media selection and combination
ISO 14971:2007 Medical devices Application of risk management to medical devices
ISO/IEC 14977 Information technology Syntactic metalanguage Extended BNF
ISO/TS 15000 Electronic business eXtensible Markup Language ebXML
ISO/TS 15000-1:2004 Collaboration-protocol profile and agreement specification
(ebCPP)
ISO/TS 15000-2:2004 Message service specification (ebMS)
ISO/TS 15000-3:2004 Registry information model specification (ebRIM)
ISO/TS 15000-4:2004 Registry services specification (ebRS)
ISO/TS 15000-5:2005 ebXML. Core Components Technical Specification, Version
2.01(ebCCTS)
ISO 15022 Securities Scheme for messages (Data Field Dictionary)
ISO 15082 Road vehicles Tests for rigid plastic safety glazing materials
-
ISO 15099 Thermal performance of windows, doors and shading devices Detailed
calculations
ISO 15112 Natural gas Energy determination
ISO 15189 Medical laboratories Particular requirements for quality and competence
ISO 15223 Medical devices Symbols to be used with medical device labels, labelling,
and information to be supplied
ISO/IEC 15288 Systems and software engineering System life cycle processes
ISO/IEC 15289 Systems and software engineering Content of systems and software
life cycle process information products (Documentation)
ISO/IEC 15291 Information technology Programming languages Ada Semantic
Interface Specification (ASIS)
ISO 15403 Natural gas Natural gas for use as a compressed fuel for vehicles
ISO 15403-1 Designation of the quality
ISO/IEC 15408 Information technology Security techniques Evaluation criteria for
IT security
ISO/IEC 15414 - Open data processing - Reference Model - Enterprise Language
ISO/IEC 15434 Information technology Automatic identification and data capture
techniques Syntax for high-capacity ADC media
ISO/IEC 15444 Information technology JPEG 2000 image coding system
ISO/IEC 15445:2000 Information technology Document description and processing
languages HyperText Markup Language (HTML)
ISO 15489-1:2001 Information and documentation Records management Part 1:
General
ISO/TR 15489-2:2001 Information and documentation Records management Part
2: Guidelines
ISO/IEC 15504 Information technology Process assessment
ISO 15614 Specification and qualification of welding procedures for metallic materials
Welding procedure test
ISO 15686 Buildings and constructed assets Service life planning
ISO/IEC 15693 Identification cards Contactless integrated circuit cards Vicinity
cards
ISO 15706 Information and documentation International Standard Audiovisual
Number (ISAN)
ISO 15707 Information and documentation International Standard Musical Work
Code (ISWC)
-
ISO 15783:2002 Seal-less rotodynamic pumps Class II Specification
ISO 15836 Information and documentation The Dublin Core metadata element set
ISO/IEC 15897 Information technology Procedures for registration of cultural
elements
ISO 15924 Information and documentation Codes for the representation of names of
scripts
ISO 15926 - Integration of Life-cycle Data for Process Plants including Oil and Gas
Production Facilities
ISO 15930 Graphic technology Prepress digital data exchange using PDF[Note 3]
ISO/IEC 15944 - Business Agreement Semantic Descriptive Techniques
ISO/IEC 15948 Information technology Computer graphics and image processing
Portable Network Graphics (PNG): Functional specification
ISO 15970 Natural gas Measurement of properties Volumetric properties: density,
pressure, temperature and compression factor
ISO 15971:2008 Natural gas Measurement of properties Calorific value and Wobbe
index
ISO 15985:2004 Plastics Determination of the ultimate anaerobic biodegradation and
disintegration under high-solids anaerobic-digestion conditions Method by analysis of
released biogas
ISO 16134 Earthquake- and subsidence-resistant design of ductile iron pipelines
ISO 16232 Road vehicles Cleanliness of components of fluid circuits
ISO 16232-8 Particle nature determination by microscopic analysis
ISO 16232-9 Particle sizing and counting by automatic light extinction particle counter
ISO 16232-10 Expression of results
ISO/IEC 16262 Information technology Programming languages, their environments
and system software interfaces ECMAScript language specification
ISO/IEC 16500 Information technology Generic digital audio-visual systems
ISO 16549 Textiles Unevenness of textile strands Capacitance method
ISO 16750 Road vehicles Environmental conditions and testing for electrical and
electronic equipment
ISO 16792 Technical product documentation - Digital product definition data practices
-
ISO/TS 16949 Quality management systems Particular requirements for the
application of ISO 9001:2008 for automotive production and relevant service part
organizations
ISO/TR 16982:2002 Ergonomics of human-system interaction Usability methods
supporting human-centred design
ISO/IEC 17020:2012 Conformity assessment -- Requirements for the operation of
various types of bodies performing inspection
ISO/IEC 17021:2011 Conformity assessment -- Requirements for bodies providing
audit and certification of management systems
ISO/IEC TS 17021-2:2012 Conformity assessment -- Requirements for bodies
providing audit and certification of management systems -- Part 2: Competence
requirements for auditing and certification of environmental management systems
ISO/IEC TS 17021-3:2013 Conformity assessment -- Requirements for bodies
providing audit and certification of management systems -- Part 3: Competence
requirements for auditing and certification of quality management systems
ISO/IEC TS 17021-4:2013 Conformity assessment -- Requirements for bodies
providing audit and certification of management systems -- Part 4: Competence
requirements for auditing and certification of event sustainability management systems
ISO/IEC TS 17021-5:2014 Conformity assessment -- Requirements for bodies
providing audit and certification of management systems -- Part 5: Competence
requirements for auditing and certification of asset management systems
ISO/IEC TS 17022:2012 Conformity assessment -- Requirements and
recommendations for content of a third-party audit report on management systems
ISO/IEC TS 17023:2013 Conformity assessment -- Guidelines for determining the
duration of management system certification audits
ISO/IEC 17024:2003 Conformity assessment General requirements for bodies
operating certification of persons
ISO/IEC 17025:2005 General requirements for the competence of testing and
calibration laboratories
ISO 17088:2012 Specifications for compostable plastics
ISO 17202 Textiles Determination of twist in single spun yarns Untwist/retwist
method
ISO/PAS 17506 Industrial automation systems and integration COLLADA digital asset
schema specification for 3D visualization of industrial data
ISO 17776 Petroleum and natural gas industries Offshore production installations
Guidelines on tools and techniques for hazard identification and risk assessment
ISO 17799 - Code of Practice for Information Security Management (superseded by
ISO/IEC 27002)
-
ISO 17894 Ships and marine technology Computer applications General principles
for the development and use of programmable electronic systems in marine
applications
ISO/IEC 18000 Information technology Radio frequency identification for item
management
ISO/IEC 18000-1 Reference architecture and definition of parameters to be
standardized
ISO/IEC 18000-2 Parameters for air interface communications below 135 kHz
ISO/IEC 18000-3 Parameters for air interface communications at 13,56 MHz
ISO/IEC 18000-4 Parameters for air interface communications at 2,45 GHz
ISO/IEC 18000-6 Parameters for air interface communications at 860 MHz to 960 MHz
ISO/IEC 18000-7 Parameters for active air interface communications at 433 MHz
ISO/IEC 18004 Information technology Automatic identification and data capture
techniques QR Code 2005 bar code symbology specification
ISO/IEC 18009 Information technology Programming languages Ada: Conformity
assessment of a language processor
ISO/IEC 18013 Information technology Personal identification ISO-compliant
driving license
ISO/IEC 18013-1:2005 Physical characteristics and basic data set
ISO/IEC 18013-2:2008 Machine-readable technologies
ISO/IEC 18013-3:2009 Access control, authentication and integrity validation
ISO/IEC 18014 Information technology Security techniques Time-stamping services
ISO/IEC 18023 Information technology SEDRIS
ISO/IEC 18023-1:2006 Functional specification
ISO/IEC 18023-2:2006 Abstract transmittal format
ISO/IEC 18023-3:2006 Transmittal format binary encoding
ISO/IEC 18024-4:2006 Information technology SEDRIS language bindings Part 4:
C
ISO/IEC 18025:2005 Information technology Environmental Data Coding
Specification (EDCS)
ISO/IEC 18026 Information technology Spatial Reference Model (SRM)
ISO/IEC 18033 Information technology Security techniques Encryption algorithms
-
ISO/IEC 18033-1 General
ISO/IEC 18033-2 Asymmetric ciphers
ISO/IEC 18033-3 Block ciphers
ISO/IEC 18033-4 Stream ciphers
ISO/IEC 18041-4 Information technology Computer graphics, image processing and
environmental data representation Environmental Data Coding Specification (EDCS)
language bindings Part 4: C
ISO/IEC 18042-4:2006 Information technology Computer graphics and image
processing Spatial Reference Model (SRM) language bindings Part 4: C
ISO/IEC 18092 Information technology Telecommunications and information
exchange between systems Near Field Communication Interface and Protocol
(NFCIP-1)
ISO 18117:2009 Surface chemical analysis Handling of specimens prior to analysis
ISO 18118:2004 Surface chemical analysis - Auger electron spectroscopy and X-ray
photoelectron spectroscopy - Guide to the use of experimentally determined relative
sensitivity factors for the quantitative analysis of homogeneous materials
ISO/TS 18152 Ergonomics of human-system interaction Specification for the process
assessment of human-system issues
ISO 18185 Freight containers Electronic seals
ISO 18245 Retail financial services Merchant category codes
ISO/TR 18529:2000 Ergonomics Ergonomics of human-system interaction Human-
centred lifecycle process descriptions
ISO 18541 Road vehicles Standardized access to automotive repair and maintenance
information (RMI)
ISO 18629 Industrial automation systems and integration Process specification
language
ISO 19005 Document management Electronic document file format for long-term
preservation
ISO 19011:2011 Guidelines for auditing management systems
ISO 19092 Financial services Biometrics Security framework
ISO 19101 Geographic information Reference model
ISO/TS 19103 Geographic information Conceptual schema language
ISO/TS 19104 Geographic information Terminology
ISO 19105 Geographic information Conformance and testing
ISO 19106 Geographic information Profiles
-
ISO 19107 Geographic information Spatial schema
ISO 19108 Geographic information Temporal schema
ISO 19109 Geographic information Rules for application schema
ISO 19110 Geographic information Methodology for feature cataloguing
ISO 19111 Geographic information Spatial referencing by coordinates
ISO 19112 Geographic information Spatial referencing by geographic identifiers
ISO 19113 Geographic information Quality principles
ISO 19114 Geographic information Quality evaluation procedures
ISO 19115 Geographic information Metadata
ISO 19116 Geographic information Positioning services
ISO 19117 Geographic information Portrayal
ISO 19118 Geographic information Encoding
ISO 19119 Geographic information Services
ISO/TR 19120 Geographic information Functional standards
ISO/TR 19121 Geographic information Imagery and gridded data
ISO/TR 19122 Geographic information / Geomatics Qualification and certification of
personnel
ISO 19123 Geographic information Schema for coverage geometry and functions
ISO 19125 Geographic information Simple feature access
ISO 19126 Geographic information Feature concept dictionaries and registers
ISO/TS 19127 Geographic information Geodetic codes and parameters
ISO 19128 Geographic information Web map server interface
ISO/TS 19129 Geographic information Imagery, gridded and coverage data
framework
ISO/TS 19130 Geographic information Imagery sensor models for geopositioning
ISO 19131 Geographic information Data product specifications
ISO 19132 Geographic information Location-based services Reference model
ISO 19133 Geographic information Location-based services Tracking and
navigation
ISO 19134 Geographic information Location-based services Multimodal routing and
navigation
ISO 19135 Geographic information Procedures for item registration
-
ISO 19136 Geographic information Geography Markup Language (GML)
ISO 19137 Geographic information Core profile of the spatial schema
ISO/TS 19138 Geographic information Data quality measures
ISO/TS 19139 Geographic information Metadata XML schema implementation
ISO 19141 Geographic information Schema for moving features
ISO 19142 Geographic information Web Feature Service
ISO 19143 Geographic information Filter encoding
ISO 19144 Geographic information Classification systems
ISO 19146 Geographic information Cross-domain vocabularies
ISO 19156 Geographic information - Observations and measurements
ISO 19439 Enterprise integration Framework for enterprise modelling
ISO 19440 Enterprise integration Constructs for enterprise modelling
ISO/IEC 19501 Information technology Open Distributed Processing Unified
Modeling Language (UML) Version 1.4.2
ISO/IEC 19502 Information technology Meta Object Facility (MOF)
ISO/IEC 19503 Information technology XML Metadata Interchange (XMI)
ISO/IEC 19752 Information technology Method for the determination of toner
cartridge yield for monochromatic electrophotographic printers and multi-function
devices that contain printer components
ISO/IEC 19757 Information technology Document Schema Definition Languages
(DSDL)
ISO/IEC 19757-2 Regular-grammar-based validation RELAX NG
ISO/IEC 19757-3 Rule-based validation Schematron
ISO/IEC 19757-4 Namespace-based Validation Dispatching Language (NVDL)
ISO/IEC 19770 Information technology Software asset management
ISO/IEC 19785 Information technology Common Biometric Exchange Formats
Framework
ISO/IEC 19788 Information technology Learning, education and training Metadata
for learning resources
ISO/IEC 19790 Information technology Security techniques Security requirements
for cryptographic modules
ISO/IEC 19793 - Open Distributed Processing -- Use of UML for ODP system
specifications
ISO/IEC 19794 Information technology Biometric data interchange formats
-
ISO/IEC 19794-1:2011 Framework
ISO/IEC 19794-2:2005 Finger minutiae data
ISO/IEC 19794-3:2006 Finger pattern spectral data
ISO/IEC 19794-4:2005 Finger image data
ISO/IEC 19794-5:2005 Face image data
ISO/IEC 19794-6:2005 Iris image data
ISO/IEC 19794-7:2007 Signature/sign time series data
ISO/IEC 19794-8:2006 Finger pattern skeletal data
ISO/IEC 19794-9:2007 Vascular image data
ISO/IEC 19794-10:2007 Hand geometry silhouette data
ISO/IEC 20000 Information technology Service management
ISO 20022 Financial services UNIversal Financial Industry message scheme
ISO 20653 Road vehicles - Degrees of protection (IP-Code) - Protection of electrical
equipment against foreign objects, water and access
ISO/IEC TR 20943 Information technology Procedures for achieving metadata
registry content consistency
ISO/IEC TR 20943-1:2003 Data elements
ISO/IEC TR 20943-3:2004 Value domains
ISO/IEC 21000 Information technology Multimedia framework (MPEG-21)
ISO/IEC 21481 Information technology Telecommunications and information
exchange between systems Near Field Communication Interface and Protocol -2
(NFCIP-2)
ISO 21482 Ionizing-radiation warning Supplementary symbol
ISO 21500 Guidance on project management
ISO 22000:2005 Food safety management systems Requirements for any
organization in the food chain
ISO/TS 22002 Prerequisite programmes on food safety
ISO/TS 22002-1:2009 Prerequisite programmes on food safety Part 1: Food
manufacturing
ISO/TS 22002-2:2013 Prerequisite programmes on food safety Part 2: Catering
ISO/TS 22002-3:2011 Prerequisite programmes on food safety Part 3: Farming
ISO/TS 22003:2013 Food safety management systems Requirements for bodies
providing audit and certification of food safety management systems
-
ISO 22004:2014 Food safety management systems Guidance on the application of
ISO 22000
ISO 22005:2007 Traceability in the feed and food chain General principles and basic
requirements for system design and implementation
ISO 22093 Industrial automation systems and integration Physical device control
Dimensional Measuring Interface Standard (DMIS)
ISO 22241 Diesel engines NOx reduction agent AUS 32
ISO 22241-1 Quality requirements
ISO 22241-2 Test methods
ISO 22241-3 Handling, transportation and storing
ISO/IEC TR 22250 Information technology Document description and processing
languages Regular Language Description for XML (RELAX)
ISO/IEC TR 22250-1:2002 RELAX Core
ISO 22301:2012 Societal security Business continuity management systems
Requirements
ISO/PAS 22399:2007 Societal security Guideline for incident preparedness and
operational continuity management
ISO 22716:2007 Cosmetics Good Manufacturing Practices (GMP) Guidelines on
Good Manufacturing Practices
ISO/IEC 23003 Information technology MPEG audio technologies
ISO/IEC 23003-1 MPEG Surround
ISO/IEC 23003-2 Spatial Audio Object Coding (SAOC)
ISO/IEC 23270 Information technology Programming languages C#
ISO/IEC 23271 Information technology Common Language Infrastructure (CLI)
ISO/IEC 23360 Linux Standard Base (LSB) core specification 3.1
ISO/IEC 23360-1 Generic specification
ISO/IEC 23360-2 Specification for IA32 architecture
ISO/IEC 23360-3 Specification for IA64 architecture
ISO/IEC 23360-4 Specification for AMD64 architecture
ISO/IEC 23360-5 Specification for PPC32 architecture
ISO/IEC 23360-6 Specification for PPC64 architecture
ISO/IEC 23360-7 Specification for S390 architecture
ISO/IEC 23360-8 Specification for S390X architecture
-
ISO 23733 Textiles Chenille yarns Test method for the determination of linear
density
ISO 23950 Information and documentation Information retrieval (Z39.50)
Application service definition and protocol specification
ISO/IEC 24707:2007 Information technology Common Logic (CL): a framework for a
family of logic-based languages
ISO/IEC 24727 Identification cards Integrated circuit card programming interfa