Page 1 of 63
व्यावसाययक परीक्षण यरपोर्ट संख्या@No: PT-119/938
COMMERCIAL TEST REPORT माह@Month: November, 2018
Validity: 31.10.2021
INITIAL COMMERCIAL TEST
VST SHAKTI 130 DI ● S POWER TILLER
भारत सरकार Government of India
कृयषएवं यकसान कल्याण मंत्रालय
Ministry of Agriculture and Farmers Welfare
कृयष, सहकायरता एवं यकसान कल्याण यवभाग Department of Agriculture, Cooperation and Farmers Welfare
दयक्षणी के्षत्र कृयष मशीनरी प्रयशक्षण एवं परीक्षण संस्थान Southern Region Farm Machinery Training and Testing Institute
ट्रैक्र्र नगर, गालटयदने्न - 515 731, यिला: अनंतपुर (आं. प्र.) Tractor Nagar, Garladinne- 515 731, District: Anantapur (A.P.)
[An ISO 9001:2015 CERTIFIED INSTITUTE]
Website: http://srfmtti.dacnet.nic.in/
E-mail: [email protected] Tele./FAX: 08551-286441
PT-119/938
VST SHAKTI 130 DI ● S POWER TILLER
COMMERCIAL
(ICT)
SOUTHERN REGION FARM MACHINERY TRAINING & TESTING INSTITUTE,
ANANTAPUR, (A.P.)
Page 2 of 63
Manufacturer
:
M/s. V.S.T. Tillers Tractors Ltd.,
Plot No. 222-224 & 229-232, 3rd
Phase,
KIADB Industrial Area, Malur,
Kolar District - 563130, Karnataka,
India.
Applicant : The Manufacturer
Indigenous/ Imported : Indigenous
VST SHAKTI 130 DI ● S POWER TILLER
Report No.: PT-119/938 Month: November Year:2018
Government of India
Ministry of Agriculture and Farmers Welfare
Department of Agriculture, Cooperation and Farmers Welfare
Southern Region Farm Machinery Training and Testing Institute
Tractor Nagar, Garladinne - 515 731, District: Anantapur (A.P.) [An ISO 9001:2015 CERTIFIED INSTITUTE]
Telephone No. 08551-286441 Fax No.08551-286441
Website: http://srfmtti.dacnet.nic.in/ E-mail: [email protected]
PT-119/938
VST SHAKTI 130 DI ● S POWER TILLER
COMMERCIAL
(ICT)
SOUTHERN REGION FARM MACHINERY TRAINING & TESTING INSTITUTE,
ANANTAPUR, (A.P.)
Page 57 of 63
18.17 Salient Observations:
18.17.1 Engine Performance:
i) The backup torque of engine is 9.04%, under natural ambient
condition.
ii) The maximum power was observed as 8.5 kW & 8.2 kW under
natural & high ambient condition respectively.
iii) The specific fuel consumption corresponding to maximum power was
recorded as 262 g/kWh against the declared value of 299 g/kWh.
iv) The specific fuel consumption corresponding to rated power was
observed as 262 g/kWh against the declared value of 299 g/kWh.
v) The maximum torque was recorded as 36.8 Nm against declared
value of 36.5 Nm under natural ambient condition.
18.17.2 Rotary shaft performance:
i) The maximum and rated rotary shaft power was measured as 7.0 kW.
ii) The specific fuel consumption corresponding to power at rated engine
speed was measured as 299 g/kWh against the declared value of
310 g/kWh.
iii) The maximum equivalent rotary shaft torque was observed as
297.2 Nm against the declared value of 315 Nm.
18.17.3 Mechanical Vibration:
The amplitude of mechanical vibration on most of controls /
measuring points of the power tiller exceeded the limit of 100 micron.
The mechanical vibration is directly concerned with Operator‟s Health, Safety and Comfort; apart from the useful life of the
machine‟s components. In view of the above, this should be taken care for corrective action.
18.17.4 Noise measurement:
Max. Noise at operator‟s ear level and by stander‟s position was observed as 96 dB(A) and 81 dB(A). The noise observed at operator's
ear level is more than the limit specified by IS 12239 (Part3) : 1988.
The Sound Pressure Level is directly influencing the Operator‟s Health, Safety and Comfort; and therefore warrants the corrective
action.
18.17.5 Haulage test
18.17.5.1 The power tiller was recommended for haulage test with a trailer of
gross mass of 1.5 tonne.
PT-119/938
VST SHAKTI 130 DI ● S POWER TILLER
COMMERCIAL
(ICT)
SOUTHERN REGION FARM MACHINERY TRAINING & TESTING INSTITUTE,
ANANTAPUR, (A.P.)
Page 58 of 63
18.17.5.2 Distance traveled per liter was observed 12.92 to 13.25 km.
18.17.5.3 Specific fuel consumption was observed 50.31 to 51.59 cc/km/t.
18.17.6 Wetland cultivation (Puddling test) :
18.17.6.1 Puddling test was conducted with cage wheels and with hatchet blade.
18.17.6.2 The maneuverability of power tiller during puddling test was found
satisfactory.
18.17.6.3 On partial dismantling of the power tiller and inspection of the oil
samples from engine, crankcase, transmission case and rotary chain
case, no entry of mud and/water was observed in the rotary shaft
bearing cap.
18.17.7 Rotary blades:
i) The hourly rate of wear of blades for dry land and wet land
operations was observed as 0.21 to 0.44 percent and
0.10to0.48percent respectively.
ii) Chemical composition of straight &hatchet blades conforms to IS
6690:1981 (Reaffirmed 2012).
iii) The dimensions of straight & hatchet blades conforms to the
requirement of IS 6690:1981 (Reaffirmed 2012),
iv) The hardness of straight and hatchet blades conforms the requirement
of IS 6690:1981 (reaffirmed 2012).
18.17.8 As per IS 12239 (Part 3) : 1988, “maximum safe speed” with trailer is required to be specified by the manufacturer. Necessary action may
be taken in this regard.
18.17.9 As per IS 12239 (Part 3) : 1988, balancing mass to be added to
achieve correct weight balance of the power tiller with various
attachments should be recommended by the manufacturer in the
operator manual. This may be examined for compliance.
18.17.10 Provision of spark arresting device may be considered for
incorporation in the exhaust system.
18.17.11 Provided metallic plate should be as per IS 10273:1987.
18.17.12 It is recommended that the tyre should have the “Marking” as per clause 8 of IS 13154:1991.
18.17.13 The handle grip does not meet the requirement of IS 11858 : 1986.
This may be looked into for compliance.
PT-119/938
VST SHAKTI 130 DI ● S POWER TILLER
COMMERCIAL
(ICT)
SOUTHERN REGION FARM MACHINERY TRAINING & TESTING INSTITUTE,
ANANTAPUR, (A.P.)
Page 60 of 63
19.8 18.17.13 The handle grip will be studied & corrective action will be taken as
per IS 11858:1986.
19.9 18.18 All literatures will be suitably modified as per IS 8132:1999 & will
take corrective action for inclusion of Fuel saving tips.
APPENDIX – I
BRIEF SPECIFICATION OF IMPLEMENTS USED
DURING FIELD TEST
Sl.No. I t e m Rotary unit
1. Make &Model VST SHAKTI& 130 DI ● S
2. Supplied by VST SHAKTI
3. No. of blades 18 +18
4. Type of rotaryblades Straight + Hatchet
5. Spacing of rotaryblades (mm) 35 to 45
6. Overall dimensions (mm):
- Length 815
- Width 740
- Height 580
7. Gross mass (kg) 106
APPENDIX –II
BRIEF SPECIFICATION OF CAGE WHEEL
Sl. No. Item Cage wheel
1. Type Plate
2. Dia., (mm) 765
3. Width, (mm) 300
4. No & Type of lugs 16+8 & rectangular
5. Size of lugs, (mm) 26 x 12.3 x 123/ 210 x 155 x 4.60
6. Spacing of lugs, (mm) 125-145/280-290
7. Weight of each cage wheel, (kg) 21.0