INDUSTRIAL PRODUCTS
TaeguTec Ltd. acquired the standard for manufacturing and servicing of aerospace components.
TaeguTec has achieved the Quality Management System standard AS 9100 - the standard for manufacturing and servicing of aerospace components from DNV (DET NORSKE VERITAS).
AS 9100 is the only globally recognized standard for the aerospace industry and it has become the worldwide standard for the sector.
The quality management system requires a high degree of stability and reliability and TaeguTec meets the requirements of the standard with its high quality advanced technology production methods & systems.
TaeguTec Industrial Products2
15 page DIe & ANvIL /PUNCheS
16 - 17 pages CARbIDe RODS
18 - 19 pages WeAR PARTS
4 - 5 pages TUNGSTeN POWDeRS
6 - 14 pages CARbIDe ROLLS - TORQUE ROLL - BLOCK ROLL - TRI ROLL - QUADSLIT ROLL - CANTILEVER ROLL - COMPOSITE ROLL - TURBING ROLL - SECTION ROLL ROLL - GRADES
3Member IMC Group
TUNGSTeN MeTAL POWDeR TaeguTec has been producing high quality
tungsten metal powder with a variety of particle sizes for more than 30 years.
APPLICATIONTungsten Carbide Powder, Heavy Alloy, Electrical Contacts, Diamond Tools, Wires etc.
TUNGSTeN
TaeguTec Industrial Products4
TUNGSTeN CARbIDe POWDeR TaeguTec's premium quality tungsten carbide powder is produced by carburization
in a hydrogen atmosphere with a mixture of tungsten metal powder and pure carbon black.
RTP POWDeR TaeguTec supplies tailor-made RTP(Ready-to-press)
powder as per customer’s specification.
APPLICATIONCemented Tungsten Carbide Cutting Tools, Wear Parts, Roll & Die, Diamond Tools, Mining Tools etc.
5Member IMC Group
CARbIDe ROLLS
Free from slippage even under high rolling torque & low rolling speed. Flexible and optimal design for every requirement. Suitable for various applications from Finishing Block
to Intermediate Mill. Higher productivity with excellent surface finish of
final products through precise dimension control during rolling.
Minimizes downtime for roll changes.
Roll Size Groove Dimension RollingTorque(kg·m)
RollingSpeed(m/sec)
GradeOuter Diameter(Ømm)
barrel Length(mm) Type Width (mm)
350-500 500-900 OvalRound
50-8030-50 2,500-8,000 Min. 1.5 T30M, T30S
8000
07 78 89 910 10
7000
3.5
60003
50002.5
40002
3000 1.5
2000 1
0.51000
9000Kg·m m/s
Stand Stand
• Rolling Torque • Rolling Speed
6 TaeguTec Industrial Products
7
Available in several grades with high crack-resistance, anti-oxidation and wear-resistance. All types of grooves available.
- Wire Rod Mill: Pre-Finishing Mill (PFM), No Twist Mill (NTM) Reducing Sizing Mill (RSM), Pinch Roll- Rebar Mill: Finishing Block, Pinch Roll
Application
• Intermediate Mill to PFM
• NTM to RSM Roll Size Products Rolling
Speed(m/sec)
GradeOuter Diameter(Ømm)
Width(mm) Type Final Size
(Ømm)
208-212 60-72 OvalRound
5.5-1210-20 T20M, T20S, T17L
158.75-166 57.3-70 OvalRound 20-120 T15S, T14L, T11L
Roll Size Groove Dimension RollingTorque(kg·m)
RollingSpeed(m/sec)
GradeOuter Diameter(Ømm)
Width(mm) Type Width (mm)
330-450 100-130 OvalRound
30-8020-50 1,000-6,000 1.5-12 T30M, T30S
7Member IMC Group
TaeguTec Industrial Products
CARbIDe ROLLS
Available in various grades for high performance with high surface finish enabling defect-free finished production.
Stable & reliable clamping technology.
- Round Bar Mill: Reducing Sizing Block (RSB) for Round Bar
Roll Size Products RollingSpeed(m/sec)
GradeOuter Diameter(Ømm)
Width(mm) Type Final Size
(Ømm)
300-380 40-90 Oval,Round 16-42 10-20 T25H, T20M,T17L,T15M
- Wire Rod Mill: PFM for Wire Rod
Application
Roll Size Products RollingSpeed(m/sec)
GradeOuter Diameter(Ømm)
Width(mm) Type Final Size
(Ømm)
200-220 25 Oval,Round 5.5 5-20 T20M
Interference-Fit & boltingInterference-Fit type
8
Improved grades which eliminate chipping at the sharp edge of slitting. Superior quality / longer groove life than steel rolls. Composite Roll stable & reliable clamping technology.
- Rebar Mill: Slit stand for rebar (D8mm-D20mm)
Application
2 Slit 3 Slit 4 Slit 5 Slit
9Member IMC Group
CARbIDe ROLLS
- Wire Rod Mill & Rebar Mill: Intermediate Mill.
Application
Roll Size Products RollingTorque(kg•m)
RollingSpeed(m/sec)
GradeOuter Diameter(Ømm)
Width(mm) Type Width
(mm)
290-475 140-235 OvalRound
40-7020-40 1,000-4,000 3-10 T30M,T27M,T23L
Several grades available with excellent toughness for high rolling torque & low rolling speeds. Stable & reliable clamping technology.
Interference-Fit & boltingSide Key & bolting
TaeguTec Industrial Products10
Applicable to various rolling stands due to excellent & unique design. Stable & reliable clamping technology. Unique & flexible design for different requirements. Minimum downtime for roll changes due to longer groove life-cycle of carbide rolls. Easy to assemble & disassemble. Reduced mill downtime maximum productivity.
- Wire Rod Mill, Rebar Mill & Round Bar Mill: Finishing Mill for small size products.
Application
Roll Size Groove Dimension RollingTorque(kg•m)
RollingSpeed(m/sec)Outer Diameter
(Ømm)barrel length
(mm) Type Width(mm)
260-440 400-900
OvalRoundSquare
DogboneNotch
Less than40
(oval)Less than
30(Round)
Max 2,500 Min 3
Tungsten Carbide Ring
Spacer
hydraulicUnit
Clamping Ring
Nut
11Member IMC Group
CARbIDe ROLLS
Guarantees quality improvements with excellent surface finish.
hot Rolling Mill
Application: Stretch Reducing Mill (SRM) for seamless pipes & Straightener Roll
Application: Sizing pass for seam pipes.
Product Size
Roll SizeGrade RemarkOuter Diameter
(Ømm)Width(mm)
Ø50-Ø120mm 270-380 85-150 T20M, T30ST20H, T30H
3-Roll typeHot Rolling
Product Size
Roll SizeGrade RemarkOuter Diameter
(Ømm)Width(mm)
Ø20-Ø70mm 150-250 80-120 T14L 2-Roll typeCold Rolling
Cold Rolling Mill
Shrinkage-Fit & bolting
TaeguTec Industrial Products12
Application: Finishing Mill for Light Section Bar Mill (Angle Bar, Flat Bar).
Applicable to various rolling stands due to excellent & unique design. Stable & reliable clamping under working conditions of high rolling torque & load.
Item Product Size
Roll SizeGradeOuter Diameter
(Ømm)barrel Length
(mm)
Angle Bar AB25-AB65350-500 500-800
T19, T20MT25H, T30M, T30S
T23L, T27MFlat Bar 50-150
13Member IMC Group
GradeChemical Composition Physical Properties
ApplicationWC (%) Co (%) hardness
(hRA)TRS
(Kg/mm2)Density(g/cm3)
T06S 94 6 87.1-89.1 180 14.5-14.9 Finishing Block & RSM for Wire Rod
T10S 90 10 87.7-89.7 230 14.1-14.5 Finishing Block & RSM for Wire Rod
T15S 85 15 84.5-86.5 230 13.6-14.0 Finishing Block for Wire Rod & Round Bar
T20S 80 20 82.9-84.9 230 13.2-13.6 Finishing Block & IFM for Wire Rod
T25S 75 25 82.7-84.7 230 12.8-13.2 IFM for Wire Rod & Prefinishing for Deformed Bar
T30S 70 30 79.6-81.6 210 12.4-12.8 for Tube Mill Finishing for Deformed Bar
GradeChemical Composition Physical Properties
ApplicationWC (%) Co-Ni-Cr (%) hardness
(hRA)TRS
(Kg/mm2)Density(g/cm3)
T09L 91 9 87.0-89.0 230 14.4-14.8 Finishing Block & RSM for Wire Rod
T11L 89 11 85.9-87.9 230 14.2-14.6 Finishing Block & RSM for Wire Rod Al, Cu Rods
T14L 86 14 85.1-87.1 230 13.9-14.3 Finishing Block & RSM for Wire Rod Al, Cu Rods
T14M 86 14 84.8-86.8 210 13.9-14.3 Finishing Block & RSM for Wire Rod Al, Cu Rods
T15M 85 15 84.2-86.2 210 13.8-14.2 Finishing Block for Wire Rod & Round Bar
T16h 84 16 82.9-84.9 230 13.7-14.1 Finishing Block & Pinch Roll for Wire Rod
T17L 83 17 83.6-85.6 230 13.6-14.0 Finishing Block & Pinch Roll for Wire Rod
T19L 81 19 82.9-84.9 230 13.4-13.8 Finishing Block & IFM for Wire Rod
T20M 80 20 81.9-83.9 230 13.3-13.7 Finishing Block & IFM for Wire Rod
T20h 80 20 81.7-83.7 210 13.3-13.7 Finishing Block & IFM for Wire Rod
T23L 77 23 81.4-83.4 230 13.1-13.5 IFM for Wire Rod & Prefinishing for Deformed Bar
T25h 75 25 79.0-81.0 230 12.8-13.2 Prefinishing for Deformed Bar for Finishing
T27M 73 27 78.8-80.8 210 12.7-13.1 Prefinishing & Square groove for Deformed Bar
T30M 70 30 77.8-79.8 210 12.5-12.9 for Wire Rod Finishing & Dogbone groove for Deformed Bar
T30h 70 30 77.0-79.0 210 12.5-12.9 for Tube Mill Finishing for Deformed Bar
T31L 69 31 77.6-79.6 210 12.4-12.8 for Deformed Bar
T32L 68 32 76.5-78.5 210 12.3-12.7 Finishing & Dogbone groove for Deformed Bar
Multi-binder Grade
Single-binder Grade
CARbIDe ROLLS
TaeguTec Industrial Products14
TaeguTec Die & Anvil are used extensively in high pressure applications such as industrial synthetic diamond: CBN, PCD, PCBN, etc.
These high pressure tools are used in extreme environments of up to 50 kbar and at temperatures in excess of 1,400 degrees Celsius.
TaeguTec has exceeded our customers’ demands through our quality control system and innovative research and development.
Various grades are ready to serve customer requirements.
TaeguTec is a specialized supplier of high pressure hardmetal toolings.
DIe & ANvIL
15Member IMC Group
One hole straight coolant rods
Two hole and three hole30 degree coolant rods
Gun drill blanks
Two hole straight coolant rods
Two hole 40 degree coolant rods
RODS WITh COOLANT hOLe TaeguTec’s state-of-the-art extrusion technology makes
it possible to hold high accuracy and consistent quality of through coolant rods for hole making tools.
CARbIDe
16 TaeguTec Industrial Products
RODS WIThOUT COOLANT hOLe
Ball End Mill Blanks
Ground Long & Short RodsUnground Long & Short Rods
Step-formed & Chamfered
TaeguTec’s advanced sinter HIP process is suitable for all types of rods and enables them to have more stable and consistent quality.
17Member IMC Group
PReFORM Excellent deformation resistance due to
high compressive & impact strength.
APPLICATION• Stamping die & punch for lead frame, connector, switch and relay.
PLATe High cutting-edge strength & good wear resistance
by using fine & ultrafine WC. High deformation & deflection resistance.
CAN MAKING MOLD Excellent deformation resistance thanks to
high compressive strength.
APPLICATION• Stamping molds for 2-piece can and 3-piece cans• Stamping molds for aerosol cans
KNIFe
Slitting & Others
Longer tool life with high impact strength, high tensile strength & wear resistance.
WeAR
TaeguTec Industrial Products18
APPLICATION• Pin-chucks, guide rolls • Pins and jigs for heat treatment • Nozzles• Gate blocks for aluminum casting • Dies for hot extrusion and drawing
AS10 Silicon Nitride Ceramics High strength and fracture toughness. High hardness at elevated temperature. Excellent high-temperature strength.
APPLICATION• Mechanical seals, bearings • Parts for valves and pumps• Jigs for semiconductor equipment and furnace parts• Grit-blast nozzle liners • Various bulletproof products• Thermocouple protection tubes and high temperature liners (parts of waste incinerators)
AC10 Silicon Carbide Ceramics High wear resistance and corrosion resistance. Low thermal expansion coefficient and
friction coefficient.
APPLICATION• Magnetic heads for hard discs • Paper sliders• Parts requiring higher strength and hardness than alumina at room temperature
Ab30 Al2O3-TiC Ceramics High strength, hardness and fracture toughness. Low friction coefficient. Uniform performance and durability.
19Member IMC Group
World headquarters1040 Gachang-ro, Gachang-myeon,Dalseong-gun, Daegu 42936, KOREATel: 82-53-760-7666(Overseas), 82-53-760-7677(Local) Fax: +82-53-768-9912Web:http://www.taegutec.com
•English Version: IP 01/2017•©TaeguTec LTD.
English Version: IP 01/2017 ©TaeguTec LTD.