AGENDA
• Introduction - Claire Holman, Brook Cottage Consultants
• Source-pathway-receptor approach Jon Pullen, RPS
• Site conditions Hugh Datson, Dustscan
• PM10 and dust reduction with distance Ian Stone, Advance
Environmental
• Determining ‘Residual Source Emissions’ Srinivas Srimath,
RSK
• Planning inquiry decisions Mark Dawson, Wardell
Armstrong
• Closing remarks
Brook Cottage Consultants 1
IAQM Mineral Planning Guidance
Dr Claire Holman
Chair: IAQM Minerals Working Group
IAQM Meeting
24 May 2016
London
2Brook Cottage Consultants
Scope
• Sites extracting solid minerals
• May include secondary aggregate processing
• Specifically for planning not environmental permit
applications
• Primarily for England
Brook Cottage Consultants 4
Photo: Rachel McHale. SLR
Consulting Ltd
Approach
• Aims to:
– promote good quality assessments provide framework
– fill gap left by withdrawal of MP2
– supplement advice given in national Planning Practice Guidance
• To use the Source-pathway-receptor relationship
• Otherwise non prescriptive
Brook Cottage Consultants 5
Assessing impacts
Mineral impacts
• Difficult to quantify
• Little robust data of
impacts
• Requires knowledge of
site operations &
effectiveness of mitigation
measures
Brook Cottage Consultants 6
Photo: Ian Stone, Advance Environmental
nPPG - Key stages to a dust
assessment
1. Establish baseline conditions of the existing dust climate around the site of the proposed operations;
2. identify site activities that could lead to dust emissions without mitigation;
3. identify site parameters which may increase potential impacts from dust;
4. recommend mitigation measures, including modification of site design;
5. make proposals to monitor and report dust emissions to ensure compliance with appropriate environmental standards and to enable an effective response to complaints.
Brook Cottage Consultants 7
IAQM approach
• Assessments to use
Source – pathway – receptor model
• Screening: Where there are no receptors near to a mineral site there
will be no significant effect.
– Distance based screening criteria for dust disamenity
– Distance + background for PM10
• Assessment approach not prescriptive
• Example provided evolved from Alex Grant’s approach
• Modelling not generally required
Brook Cottage Consultants 8
Screening - PM10
National Planning Practice Guidance IAQM
• Where receptors within 1 km and background PM10
concentration is less than 17 µg/m3
Brook Cottage Consultants 10
Figure 1: Site Assessment Flow Chart[1]
Paragraph: 032 Reference ID: 27-032-20140306
Minerals dust assessment -
Content
• Existing PM10 concentration and dust deposition rates (where available)
• Location of receptors and sensitivities to PM10 / dust
• Dust sources associated with the proposed development
• Control/mitigation measures
• A prediction of the likely PM10 and dust impacts and resulting effects (on health, amenity, and/or ecology) at relevant sensitive receptors:
– likely magnitude of dust emissions (after mitigation)
– meteorological characteristics at the site;
– dispersion and dilution to the receptors, taking into account distance, orientation, local terrain and features, and other relevant factors;
– the sensitivity of the receptors to disamenity, health and/or ecology effects; and
– any likely cumulative interactions
Brook Cottage Consultants 11
Dust disamenity assessment steps
Step 1: Describe site characteristics and baseline conditions
Step 2: Estimate dust impact risk (with mitigation)
Step 3: Estimate likely magnitude of effect
Brook Cottage Consultants 12
Photo: Ian Stone, Advance Environmental
Assessment conclusion
• Assessment provides overall disamenity and, where required, the
ecological and health effects, at individual receptors
• Conclusion must be drawn of overall effect Judgement must be
used to determine effect is either “significant” or “not significant”
Brook Cottage Consultants 13
Photo: Hugh Datson, DustScan Ltd
Consultation: substantive
comments
Brook Cottage Consultants 14
Issue Response
Short term PM10 not included Lack of data available
PM2.5 not included Mineral site generally produce coarse
PM > PM2.5
The graphs will be used as a proxy for
an assessmentClearly stated this is not to be done
Ecological receptors not the same as in
the IAQM construction guidance
background PM10 screening criteria
Now consistent
Unclear how to estimate PM10 process
contributionNow referred to Appendix 5
Review
• Guidance will be reviewed in 12-18 months in
light of the experience of using it
• IAQM members will be asked to comment
Brook Cottage Consultants 15
Working group members
• Hugh Datson, DustScan
• Mark Dawson, Wardell Armstrong
• Claire Holman, Brook Cottage Consultants (Chair)
• Rachel McHale, SLR
• Jon Pullen, RPS
• Srinivas Srimath, RSK
• Matt Stoaling, Isopleth
• Ian Stone, Advance Environmental
• Penny Wilson, Air Quality Consultants
Brook Cottage Consultants 16
AGENDA
• Introduction - Claire Holman, Brook Cottage Consultants
• Source-pathway-receptor approach Jon Pullen, RPS
• Site conditions Hugh Datson, Dustscan
• PM10 and dust reduction with distance Ian Stone, Advance
Environmental
• Determining ‘Residual Source Emissions’ Srinivas Srimath,
RSK
• Planning inquiry decisions Mark Dawson, Wardell
Armstrong
• Closing remarks
Brook Cottage Consultants 17