Download - I-7550E and SIMATIC STEP 7 Configurations
![Page 1: I-7550E and SIMATIC STEP 7 Configurations](https://reader030.vdocuments.us/reader030/viewer/2022011721/61d2249feb74db05047eed28/html5/thumbnails/1.jpg)
1
I-7550E and SIMATIC STEP 7 Configurations
1. Double Click “SIMATIC Manager” icon to open “SIMATIC Manager”
2. Open “ New Project Wizard “
3. Set up Project
a. Click”Next”
![Page 2: I-7550E and SIMATIC STEP 7 Configurations](https://reader030.vdocuments.us/reader030/viewer/2022011721/61d2249feb74db05047eed28/html5/thumbnails/2.jpg)
2
b. Select CPU type then click ”Next”
c. Select Blocks and Language for Selected Blocks then click ”Next”
![Page 3: I-7550E and SIMATIC STEP 7 Configurations](https://reader030.vdocuments.us/reader030/viewer/2022011721/61d2249feb74db05047eed28/html5/thumbnails/3.jpg)
3
d. Set project name then click”Finish”
4. Double click “Hardware” to open “HW Config”
![Page 4: I-7550E and SIMATIC STEP 7 Configurations](https://reader030.vdocuments.us/reader030/viewer/2022011721/61d2249feb74db05047eed28/html5/thumbnails/4.jpg)
4
5. Install I-7550E GSD File
http://ftp.icpdas.com/pub/cd/fieldbus_cd/profibus/converter/I-7550E/
a. Click “Install GSD File”
b. Select the directory of I-7550E’s GSD file(IPDS0EB9.gsd) and click “OK”
![Page 5: I-7550E and SIMATIC STEP 7 Configurations](https://reader030.vdocuments.us/reader030/viewer/2022011721/61d2249feb74db05047eed28/html5/thumbnails/5.jpg)
5
c. Click “Install”
d. Click”OK”
![Page 6: I-7550E and SIMATIC STEP 7 Configurations](https://reader030.vdocuments.us/reader030/viewer/2022011721/61d2249feb74db05047eed28/html5/thumbnails/6.jpg)
6
e. Click “Close”
f. Confirm I-7550E’s GSD file is available
![Page 7: I-7550E and SIMATIC STEP 7 Configurations](https://reader030.vdocuments.us/reader030/viewer/2022011721/61d2249feb74db05047eed28/html5/thumbnails/7.jpg)
7
6. Double click PROFIBUS DP port of PLC
7. Add PROFIBUS subnet
a. Select “PROFIBUS” and then click “Properties”.
![Page 8: I-7550E and SIMATIC STEP 7 Configurations](https://reader030.vdocuments.us/reader030/viewer/2022011721/61d2249feb74db05047eed28/html5/thumbnails/8.jpg)
8
b. Click “Parameters”, and set mater station’s address, and then click ”New”
c. Select PROFIBUS Transmission Rate, Profile=DP and click”OK”
![Page 9: I-7550E and SIMATIC STEP 7 Configurations](https://reader030.vdocuments.us/reader030/viewer/2022011721/61d2249feb74db05047eed28/html5/thumbnails/9.jpg)
9
d. Select PROFIBUS subnet and then click ”OK”.
e. Confirm PROFIBUS subnet is available.
![Page 10: I-7550E and SIMATIC STEP 7 Configurations](https://reader030.vdocuments.us/reader030/viewer/2022011721/61d2249feb74db05047eed28/html5/thumbnails/10.jpg)
10
8. Add I-7550E
a. Search I-7550E module. Then hold down the I-7550E’s icon, and move the mouse to
PROFIBUS subnet.
b. Select “Parameter” , and double click I-7550E’s icon then set I-7550E’s address in the
“Properties” dialog (this address must be the same with dip switch of the I-7550E module and
default is “1”) then click ”OK”
![Page 11: I-7550E and SIMATIC STEP 7 Configurations](https://reader030.vdocuments.us/reader030/viewer/2022011721/61d2249feb74db05047eed28/html5/thumbnails/11.jpg)
11
c. I-7550E adds completely
9. I-7550E module configuration
a. Search for I-7550E module
![Page 12: I-7550E and SIMATIC STEP 7 Configurations](https://reader030.vdocuments.us/reader030/viewer/2022011721/61d2249feb74db05047eed28/html5/thumbnails/12.jpg)
12
b. Open I-7550E folder
c. Click I-7550E module and double click “System setting module” and select the IO
modules that you need (ex: 8 Byte In).
![Page 13: I-7550E and SIMATIC STEP 7 Configurations](https://reader030.vdocuments.us/reader030/viewer/2022011721/61d2249feb74db05047eed28/html5/thumbnails/13.jpg)
13
10. You have completed I-7550E’s configuration and you just need to download the
configuration to Siemens PLC。