Download - HP-UX LVM, Disk and FileSystem Tasks

TableofContents1.BasicTasks........................................................................................................................................................................12.RecognizingandInitializinginLVManewlyaddedDisk/LUN(Discovery/Rescan)23.RemovingaPhysicalVolume.................................................................................................................................24.CreatingaVolumeGroup.........................................................................................................................................35.AddingaDisktoaVolumeGroup......................................................................................................................46.RemovingaDiskfromaVolumeGroup.........................................................................................................57.RemovingaVolumeGroup......................................................................................................................................58.CreatingaLogicalVolumeandMountingitsFileSystem..................................................................69.ExtendingaLogicalVolumeanditsFileSystem.......................................................................................810.ReducingaLogicalVolumeanditsFileSystem.....................................................................................911.AddingaDisktoaVolumeGroupandCreatingaLogicalVolume.........................................912.AddingaDisk,CreatingaVolumeGroupandCreatingaLogicalVolume.....................1013.AddingaDisktoaVolumeGroupandExtendingaLogicalVolume..................................1114.AddingaLUN/ExternalDisk,ExtendingtheVolumeGroupandtheLogicalVolume1115.ImportingandExportingVolumeGroups.................................................................................................1216.RemovingaLogicalVolume..............................................................................................................................1317.MovingDisksWithinaSystem(LVMConfigurationwithPersistentDeviceFiles)..1318.MovingDisksWithinaSystem(LVMConfigurationwithLegacyDeviceFiles)........1419.MovingDisksBetweenSystems..................................................................................................................1420.MovingDatatoaDifferentPhysicalVolume........................................................................................1521.ReplacingaMirroredNonBootDisk...........................................................................................................1522.ReplacinganUnirroredNonBootDisk.....................................................................................................1623.ReplacingaMirroredBootDisk......................................................................................................................1724.CreatingaSpareDisk............................................................................................................................................1825.ReinstatingaSpareDisk.....................................................................................................................................1826.ChangingPhysicalVolumeBootTypes...................................................................................................1927.EnablingandDisablingaPathtoaPhysicalVolume......................................................................1928.CreatinganAlternateBootDisk.....................................................................................................................2029.MirroringtheBootDisk..........................................................................................................................................2130.MirroringtheBootDiskonHP9000Servers........................................................................................2231.MirroringtheBootDiskonHPIntegrityServers.................................................................................2232.BackingUpaMirroredLogicalVolume.....................................................................................................2333.BackingUpandRestoringVolumeGroupConfiguration............................................................2434.QuiescingandResumingaVolumeGroup............................................................................................2535.AddingaMirrortoaLogicalVolume..........................................................................................................2536.RemovingaMirrorfromaLogicalVolume.............................................................................................2637.IncreasingthePrimarySwap..........................................................................................................................2638.IdentifyingAvailableDiskstobeUsedinaVolumeGroup........................................................2639.CreatingaPhysicalVolumeGroup(PVG).............................................................................................28

HPUXLVM,DiskandFileSystemTasks

40.Creating(Mirroring)LogicalVolumesonSpecificPhysicalVolumes................................29

Searchforattacheddisk:ioscanfnCdisk

GetDiskInfo:diskinfo/dev/rdsk/c0t1d0

InitializeadiskforusewithLVM:pvcreatef/dev/rdsk/c0t1d0

Initializethediskandcheckthediskforbadblocks:mediainit/dev/rdsk/c0t1d0

Displayvolumegroupinfo:vgdisplayvvg01

AsanewdiskisaddedtotheserveroranewLUNisassignedtothehost,youhavetoexecutethefollowingprocedurefortheoperatingsystemtodiscoverythedisk/LUNandtheLVMtoinitializeit.

Checkforthenewhardware(thenewdeviceswillhaveahardwarepath,butnodevicefileassociatedwithit):ioscanfnCdisk|more

Createthedevicefileforthehardwarepath:insf

Ifusingvpathsthencreatethevpathassociation:/opt/IBMdpo/bin/cfgvpath

/opt/IBMdpomaynotbethepathofthesddsoftware,sorun"whereiscfgvpath"tofindthecorrectpath.

1.BasicTasks

2.RecognizingandInitializinginLVManewlyaddedDisk/LUN(Discovery/Rescan)

Verifythenewdevices/vpaths:ioscanfnCdiskstrings/etc/vpath.cfg/opt/IBMdpo/bin/showvpath

Createthephysicalvolume(InitializethediskforusewithLVM).Foreachdisk(notvpath)issue:pvcreatef/dev/rdsk/cxtxdx

Forvpathsthisinformationcanbefoundinthefile/etc/vpath.cfg.

Tosimplyremoveaphysicalvolumethat'snotusedandreferredbyLVMstructures(volumegroupsandlogicalvolumes)followthisquickprocedure.ToremoveaphysicalvolumeusedandreferredbyLVMstructuresyoufirsthavetoremovethelogicalvolumesandthevolumegroupswhichrelyonitbyfollowingtheproceduresdetailedinthesectionsbelow(RemovingaLogicalVolumeandRemovingaVolumeGroup)andthenyoucanissuethecommandsinthissection.

Identifythehardwarepathofthedisktoremove:ioscanfnCdisk

Removethespecialdevicefile:rmsfH

Createthedevicestructureneededforanewvolumegroup.In themknodcommand the group number (the last parameter) is an hexadecimal and it should be different for each volumegroup.Forexample,forthevolumevg02,tipicallythesecondvolumecreated)thatnumberwouldbe0x020000.Thedefaultlimitis10volumegroupsassetbythekernelparametermaxvgs.mkdir/dev/vgdatacdvgdatamknodgroupc640x010000chownRroot:sys/dev/vgdatachmod755/dev/vgdata

Create volume group vgdata I suggest NOT to use the default values for s (physical_extend_size=4MB) and to do use e(max_physical_extends=1016):vgcreatee65535s64/dev/vgdata/dev/dsk/c0t0d4

3.RemovingaPhysicalVolume

4.CreatingaVolumeGroup

vgdisplayvvgdata

Ifyourexpectingtousemorethan16physicaldisksusethepoption,rangefrom1to256disks.

If thesystemonwhichyou'recreatingthevolumegroupisanodeofanHPServiceGuardCluster, thenyouhavetopresentthenewstructuretotheclustertomakeitawareofit.Todothis:

1.Umountthefilesystemwhichreliesonthelogicalvolumeanddeactivatethevolumegroup:umount/datavolvgchangean/dev/vgdata

2.Editthecontrolscriptfileoftheclusterpackagethatwillusethelogicalvolumetoaddthereferencetoit:vi/etc/cmcluster/package_name/package_name.run3.Exportthevolumegroupmap:vgexportpsm/tmp/vgdata.map/dev/vgdata

4.Copymapfileandthepackagecontrolfiletoallnodesbyusingrcporscp:rcp/etc/cmcluster/package_name/package_name.rungldev:/etc/cmcluster/package_name/

5.Checkandnotetheminornumberingroupfileforthevolumegroup:lsl/dev/vgdata/group

6.Onthealternatenode,createthecontrolfileusingthesameminornumberoftheprimarynodenotedatstep5(alwaysonthealternatenode):mknod/dev/vgdata/groupc64

7.Importthevolumegrouponthealternatenode:vgimportsm/tmp/vgdata.map/dev/vgdata

8.Checkwetherthevolumegroupcanbeactivatedonthealternatenode,makeabackupofthevolumegroupconfiguration:vgchangeay/dev/vgdatavgcfgbackup/dev/vgdata

9.Onthealternatenode,deactivatethevolumegroupandcheck:vgchangean/dev/vgdatavgdisplayvvgdata

Note:Whenavolumegroupiscreatedthemaximumphysicalextentspervolume(max_peparameter)willbesettothemax_peofthelargestphysicalvolume(PV)or1016,whicheverisgreater,ifnomax_peisspecified.Theeffectofnotspecifyingthemax_peparameteratvolumecreationthroughtheeoptionwouldbethatanyPVaddedto thevolumegroupinthefutureregardlessoftheirsizewillbelimitedtothevolumegrougcreationvalueofmax_pe.Therefore,considerincreasingthemax_petoaccommodatePV'sthatmaylikelybelargerthanthelargestPVusedtocreatetheVolumeGroup.Theformulatousetodeterminethevalueis:physical_extent_size*max_pe=size_of_the_disk.

Thedefaultvalue forphysical_extent_size is4Mand themaximumvalue formax_pe is65535(example for18gigdiskuseavalue4608formax_pe:4M*4608=18gig).Thereisalsoadefaultvalueofamaximumof16diskspervolumegroup.The following is an example of the creation of a volume groupmodifying these two parameters (max_pe = 4608,maximumnumberofdisk=24):vgcreatee4608p24/dev/vgdata/dev/dsk/c0t0d4

Runadiscoveryofthephysicaldisks/LUNs:ioscanfnCdisk

Preparethediskifthediskwaspreviouslyusedinanothervolumegroupthenusethefoptiontooverwritetheexistingvolumegroupinformationsonthedisk:pvcreatef/dev/rdsk/c0t4d0vgdisplayv|grepPV

Addthedisktothevolumegroup:vgextendvg01/dev/dsk/c0t4d0vgdisplayvvg01

Checkwetherthediskisstillused:pvdisplay/dev/dsk/c0t4d0

Lookatlinestartingwith"AllocatedPE"thenumberattheendofthelineshouldbe0.Ifitisnotthediskisstillinuse.

Checkthevolumegrouplayout,thenumberofphysicalvolumes(PV)inthevolumegroupandcheckthepresenceofthediskinthevolume:vgdisplayvvg01vgdisplayvvg01|grepPVvgdisplayvvg01|grepPV|grepc0t4d0

Removediskfromvolumegroupandchecktheresults:

vgreducevg01/dev/dsk/c0t4d0vgdisplayvvg01|grepPVvgdisplayvvg01|grepPV|grepc0t4d0vgdisplayvvg01

5.AddingaDisktoaVolumeGroup

6.RemovingaDiskfromaVolumeGroup

7.RemovingaVolumeGroup

Beforeremovingavolumegroup,backupthedataonthevolumesofthevolumegroup.

Identifyallofthelogicalvolumesinthisvolumegroup:vgdisplayv/dev/vg01

OR:vgdisplayvvg01|grep"LVName"|awk'{print$3}'

Killtheprocessesusingthevolumesandunmountallofthelogicalvolumeswithacommandsuchasthefollowingrepeatedforeachofthevolumesinthevolumegroup:fuserku/dev/vg01/lvhomeumount/dev/vg01/lvhome

Youcanavoidissuingmanuallytheabovetwocommandsforeachofthevolumesinthevolumegroupbyusingaforloopsuchasthefollowing(customizeitforyourneeds):for vol_name in vgdisplay v vg01 | grep "LVName" | awk '{print $3}' do fuser ku /dev/vg01/$vol_name sleep 2 umount f$vol_nameechoUmounted$vol_namedone

Checkallofthelogicalvolumesinthevolumegroupareunmounted:bdfbdf|grepvg01

Afteryouhavefreedandumountedallofthelogicalvolumes,removethevolumegroupandmakesomecheck:vgexport/dev/vg01vgdisplayvvg01vgdisplayv|grepvg01vgdisplayv

Note: using vgexport to remove a volume group is easier and faster than using the lvremove on each logical volume,thevgreduceoneachofthephysicalvolumes(exceptthelastone)andavgremove.Moreover,anotheradvantageisthatthe/dev/vg01directoryisalsoremoved.

Anyway,fortherightofinformation,thisisthecommonalternativeprocedureyoucanfollowinsteadofusingthevgexport.Afteryouhavefreedandunmountedallofthelogicalvolumebyusingthefuserandtheumount, issuethefollowingcommandsforeachlogicalvolumeinthevolumegroup:lvremove/dev/vg01/lvoln

Then,issuethefollowingcommandforeachdiskinthevolumegroup:vgreduce/dev/vg01/dev/disk/diskn

Youcanavoidissuingmanuallytheabovetwocommandsforeachofthevolumesanddisksinthevolumegroupbyusingaforloopsuchasthefollowing(customizeitforyourneeds):forvol_nameinvgdisplayvvg01|grep"LVName"|awk'{print$3}'dolvremove/dev/vg01/$vol_namesleep2echoRemoved$vol_namedone

fordisk_name in `vgdisplay v | grep "PVName" | cut c3645`dovgreduce /dev/vg01 /dev/disk/$disk_namesleep2echoRemoved$disk_namedone

Finally,removethevolumegroupandmakesomecheck:vgremovevg01vgdisplayvvg01vgdisplayv|grepvg01

vgdisplayv

If thesystemonwhichyou'recreatingthevolumegroupisanodeofanHPServiceGuardCluster, thenyouhavetopresentthe new structure to the cluster tomake it aware of it.To do this follow the steps about deploying LVM configuration onHPServiceGuardClusternodesattheendofthesection"CreatingaVolumeGroup".


Createa100GBlogicalvolumelvdata:

lvcreatenlvdataL100000pwvgdatalvdisplayvlvdata

Createthefilesystem:newfsFvxfs/dev/vgdata/rlvdata

Createthemountpointandmountthefilesystem:mkdir/datavolmount/dev/vgdata/rlvdata/datavol

Ifthevolumeisdedicatedtoaspecificapplication(suchasadatabaseinstanceoranapplicationserverinstance),thentypicallyyoumayneedtoassignthatmountpointpermissionsaccordingtotheapplication'sneedsandtheownershiptotheapplication'suserandgroup,forexample:chmod755/datavolchownoracle:oragroup/datavol

Tohavethefilesystemmountedatsystem'sbootyoumusteditthe/etc/fstabtoaddtheentrycorrespondingtothenewvolumeanditsfilesystem:vi/etc/fstab/dev/vgdata/rlvdata/datavolvxfsdefaults02

Ifthesystemonwhichyou'recreatingthelogicalvolumeisanodeofanHPServiceGuardCluster, thenyouhavetopresentthenewstructuretotheclustertomakeitawareofit.Todothis:

1.Umountthefilesystemwhichreliesonthelogicalvolumeanddeactivatethevolumegroup:umount/datavolvgchangean/dev/vgdata

2.Editthecontrolscriptfileoftheclusterpackagethatwillusethelogicalvolumetoaddthereferencetoit:vi/etc/cmcluster/package_name/package_name.run3.Exportthevolumegroupmap:vgexportpsm/tmp/vgdata.map/dev/vgdata

8.CreatingaLogicalVolumeandMountingitsFileSystem

4.Copymapfileandthepackagecontrolfiletoallnodesbyusingrcporscp:rcp/etc/cmcluster/package_name/package_name.rungldev:/etc/cmcluster/package_name/

5.Checkandnotetheminornumberingroupfileforthevolumegroup:lsl/dev/vgdata/group

6.Onthealternatenode,createthecontrolfileusingthesameminornumberoftheprimarynodenotedatstep5(alwaysonthealternatenode):mknod/dev/vgdata/groupc64

7.Importthevolumegrouponthealternatenode:vgimportsm/tmp/vgdata.map/dev/vgdata

8.Checkwetherthevolumegroupcanbeactivatedonthealternatenode,makeabackupofthevolumegroupconfiguration:vgchangeay/dev/vgdatavgcfgbackup/dev/vgdata

9.Alwaysonthealternatenode,createthemountpointdirectoryandassignthepermissionsaccordinglywiththeprimarynode:mkdir/datavolchmod755/datavolchownoracle:oragroup/datavol

10.Mountthefilesytemwhichreliesonthelogicalvolumeonthealternatenode:mount/dev/vgdata/rlvdata/datavolbdf

11.Unmountthefilesystem,deactivatethevolumegrouponthealternatenodeandcheck:umount/datavolvgchangean/dev/vgdatavgdisplayvvgdata

Iftheenvironmentusesmirroredindividualdisksinphysicalvolumegroups(PVGs),checkthe /etc/lvmpvg file toensurethateachphysicalvolumegroupcontainsthecorrectphysicalvolumenamesforthealternatenode.

When you use PVGstrict mirroring, the physical volume group configuration is recorded in the /etc/lvmpvg file on theconfiguration node: this file defines the physical volume group swhich at the basis ofmirroring and indicateswhich physicalvolumesbelongtoeachphysicalvolumegroup.Oneachcluster'snode, the/etc/lvmpvgfilemustcontain thecorrectphysicalvolumenamesfor thephysicalvolumegroupssdisksastheyareknownonthatnode.Physicalvolumenamesforthesamediskscouldbedifferentondifferentnodes.After distributing volume groups to other nodes,make sure each nodes /etc/lvmpvg file correctly reflects the contents of allphysicalvolumegroupsonthatnode.

9.ExtendingaLogicalVolumeanditsFileSystem

Thelogicalvolumeextensionconsistsofextendindthevolumeitselfandthenthefilesystemwhichreliesonit.

Extendalogicalvolumeto200MB:lvextendL200/dev/vgdata/lvdatalvdisplayvlvdata

Ifthe"OnlineJFS"packageisnotinstalled,thenfilesystemmustbeunmountedbeforeyoucanextendthefilesystem.Checkwetherthe"OnlineJFS"packageisinstalled:swlistlproduct|grepijfs

If the package is not installed, then kill all process that has open files on the volume, check if the volume has been freed,umountitandcheckifit'sbeenunmounted:fuserku/dev/vgdata/lvdatafusercu/dev/vgdata/lvdataumount/dev/vgdata/lvdatabdf

If you receivemessages telling the volume/filesystem is busyand it cannot beunmounted, then force theunmount by usingtheumountfoption:umountf/dev/vgdata/lvdata

Defragmentthefilesystem(it'soptionalbutagoodpractice):fsadmdDeE/data

Extendthefilesystemto200MB:

extendfs/databdf

Ifthe"OnlineJFS"packageisinstalled,thencalculatethespacetoaddinblocks(200MB/4MB=50LE50x1024=51200blocks)andperformtheextension:fsadmFvxfsb51200/databdf

Ifyouwanttosetthelargefilesoptionsothefilesystemcansupportfilesgreaterthan2GB,thenyoucandoitalsoaftervolumecreationbyissuingthefollowingcommand:fsadmFvxfsolargefiles/databdf

Beforereducingthevolumebackupthevolumedata.Toreduce(orshrink)alogicalvolumeinsizeit'snotnecessarytoumountthefilesystem,butthelogicalvolumemustbeunusedbecausenotalloftheapplicationsmighthandlethesizereductionwhilethey'reoperating.

Checkifthereareopenfilesonthevolume:fusercu/dev/vg01/lvol5

10.ReducingaLogicalVolumeanditsFileSystem

Killtheprocessesthathaveopenfilesonthevolume:fuserku/dev/vg01/lvol5

Reducethelogicalvolumesize:lvreduceL500/dev/vg01/lvol5lvdisplayvlvol5bdf


Preparethediskifthediskwaspreviouslyusedinanothervolumegroupthenusethefoptiontooverwritetheexistingvolumegroupinformationsonthedisk:pvcreatef/dev/dsk/c0t5d0

Addthedisktothevolumegroupandchecktheresult:vgextendvg00/dev/dsk/c0t5d0vgdisplayv|grepPVvgdisplayvg00

Createthelogicalvolume:lvcreatenlvdataL100000pw/dev/vg00

Createthefilesystem:newfsFvxfs/dev/vg00/lvdata

Createthemountpointforthenewfilesystem:mkdirdatavol

Ifyouwantthenewfilesystemtobemountedatsystemboot,theneditthe/etc/fstabfiletoaddtheentryforthenewlycreatedlogicalvolumeanditsfilesystem:vi/etc/fstab/dev/vg00/lvdata/datavolvxfsdefaults02

Mountthenewfilesystem:mounta

Note: thecommandmountamountsallof the filesystems in the /etc/fstab file,so thiscommand isuseful to testwether thenewlyaddedentryinthefile issyntacticallyright.Ifyou'resurealloftheentriesinthefilearealreadymountedandthere'sno"dangerous"entry thatmustbeskippedbymountingbut (foranyreason) itwasnotcommentedout,avoidusing themountaandissuean"explicit"mountbyspecifyingthenewfilesystemtomount(mountFfs_type/dev/vg00/lvdata/datavol).

Makesomecheck:bdflvdisplay/dev/vg00/lvdata

11.AddingaDisktoaVolumeGroupandCreatingaLogicalVolume

If thesystemonwhichyou'recreatingthevolumegroupisanodeofanHPServiceGuardCluster, thenyouhavetopresentthe new structure to the cluster tomake it aware of it.To do this follow the steps about deploying LVM configuration onHPServiceGuardClusternodesattheendofthesection"CreatingaLogicalVolumeandMountingtheFileSystem".


Preparethediskifthediskwaspreviouslyusedinanothervolumegroupthenusethefoptiontooverwritetheexistingvolumegroupinformationsonthedisk:pvcreatef/dev/dsk/c0t5d0

Addthedisktothevolumegroup:vgextendvg01/dev/dsk/c0t5d0vgdisplayv|grepPV

Createthestructureforthevolumegroup:mkdir/dev/vg01mknod/dev/vg01/groupc640x010000chownRroot:sys/dev/vg01chmod755/dev/vg01chmod640/dev/vg01/group

Createthelogicalvolume:lvcreatenlvdataL100000pw/dev/vg00

Createthefilesystem:newfsFvxfs/dev/vg00/lvdata

Createthemountpointforthenewfilesystem:mkdirdatavol

Ifyouwantthenewfilesystemtobemountedatsystemboot,theneditthe/etc/fstabfiletoaddtheentryforthenewlycreatedlogicalvolumeanditsfilesystem:vi/etc/fstab/dev/vg00/lvdata/datavolvxfsdefaults02

Mountthenewfilesystem:mounta

Note: thecommandmountamountsallof the filesystems in the /etc/fstab file,so thiscommand isuseful to testwether thenewlyaddedentryinthefile issyntacticallyright.Ifyou'resurealloftheentriesinthefilearealreadymountedandthere'sno"dangerous"entry thatmustbeskippedbymountingbut (foranyreason) itwasnotcommentedout,avoidusing themountaandissuean"explicit"mountbyspecifyingthenewfilesystemtomount(mountFfs_type/dev/vg00/lvdata/datavol).

12. Adding a Disk, Creating a Volume Group and Creating a LogicalVolume

Makesomecheck:bdflvdisplay/dev/vg00/lvdata



Preparethediskifthediskwaspreviouslyusedinanothervolumegroupthenusethefoptiontooverwritetheexistingvolumegroupinformationsonthedisk:pvcreatef/dev/dsk/c0t5d0Addthedisktothevolumegroupandchecktheresults:vgextendvg01/dev/dsk/c0t5d0vgdisplayv|grepPVvgdisplayvg00

Extendthelogicalvolumeandchecktheresults:lvextendL200000/dev/vg00/lvdatalvdisplay/dev/vg00/lvdatabdf

DiscoverythenewLUN:ioscanfnCdisk>/tmp/ioscan1.txtinsfeCdiskioscanfnCdisk>/tmp/ioscan2.txtdiff/tmp/ioscan1.txt/tmp/ioscan2.txtioscanfnCdisk

RunSAMandcheckfor"unused"hardwarepath:sam

13.AddingaDisktoaVolumeGroupandExtendingaLogicalVolume

14. Adding a LUN / External Disk, Extending the VolumeGroup and theLogicalVolume

youwillnoticesomethinglike:HardwarePathNumberofPathsUseVolumeGroupTotalMBDES1/10/0/0.115.10.19.98.1.32Unused8192IBM

GettheLUNInfo:diskinfo/dev/rdsk/c33t1d3

GettheVolumeGroupInfo:vgdisplayvvg01

AdddisktotheVolumeGroup:pvcreatef/dev/rdsk/c0t4d0vgextendvg01/dev/dsk/c0t4d0vgdisplayvvg01

ORbyUsingSAM:1)OpenSAM2)SelectDisksandFileSystems>VolumeGroups3)Arrowdowntothevolumegroupyouwanttoextend(frombdf)andhitthespacebartoselectit4)Taboncetogettothemenuatthetopandthenarrowoverto"Actions"andhitenter>5)Select"Extend"fromtheActionsmenu6)Select"SelectDisk(s)..."andhitenter7)SelecttheappropriatedisktoaddwiththespacebarandselectOK,thenSelectOKwhichwillexpandthevolum8)ExitSAM

ChecktheFileSystemMountedontheLogicalVolumetoExtendandTakeNoteoftheSpaceInfo(kbytesusedavail%used):bdf/oradata

ExtendtheLogicalVolume:lvextendL11776/dev/vg01/lvol3

DefragmenttheFileSystemMountedontheLogicalVolume:fsadmdDeE/oradata

ExtendtheFileSystemMountedontheLogicalVolume:fsadmFvxfsb11776M/oradata

ChecktheFileSystemInfotoVerifytheCurrentSpace:bdf/oradata

1)Makethevolumegroupunavailablebydisactivatingit:vgchangean/dev/vgdata

2)Exportthethediskwhilecreatingalogicalvolumemapfile:vgexportvmdata_mapvgdata

15.ImportingandExportingVolumeGroups

3)Disconnectthedrivesandmovetonewsystem.

4)Movethedata_mapfiletothenewsystem.

5)Onthenewsystemrecreatethevolumegroupdirectory:mkdir/dev/vgdatamknod/dev/vgdata/groupc640x010000chownRroot:sys/dev/vgdatachmod755/dev/vgdatachmod640/dev/vgdata/group

6)Importthediskstothenewsystem:vgimportvmdata_map/dev/vgdata/dev/dsk/c2t1d0/dev/dsk/c2t2d0

7)Enablethenewvolumegroup:vgchangeay/dev/vgdata

Beforeremovingthelogicalvolumebackupthevolumedata.

Checkwetherprocesseshasopenfilesonthelogicalvolume:fusercu/dev/vgdata/lvdataAsthevolumehasbeenfreed,umountitandcheckifit'sbeenunmounted:fuserku/dev/vgdata/lvdatafusercu/dev/vgdata/lvdataumount/dev/vgdata/lvdatabdf

If you receivemessages telling the volume/filesystem is busyand it cannot beunmounted, then force theunmount by usingtheumountfoption:umountf/dev/vgdata/lvdata

Removethelogicalvolume:lvremove/dev/vgdata/lvdata


16.RemovingaLogicalVolume

17. Moving Disks Within a System (LVM Configuration with PersistentDeviceFiles)

Deactivatethevolumegroup:vgchangean/dev/vgnn

Physicallymoveyourdiskstotheirdesirednewlocations.

Activatethevolumegroup:vgchangeay/dev/vgnn

Deactivatethevolumegroup:vgchangean/dev/vgnn

Ifyouwanttoretainthesameminornumberforthevolumegroup,examinethevolumegroup'sgroupfile:lsl/dev/vgnn/group

RemovethevolumegroupdevicefilesanditsentryfromtheLVMconfigurationfiles:vgexportvsm/tmp/vgnn.map/dev/vgnn

Physicallymoveyourdiskstotheirdesirednewlocations.

Toviewthenewlocations:vgscanv

If youwant to retain theminor number of the volume group device file, create it (the group file in this example has amajornumberof64andaminornumberof0x01000000):mkdir/dev/vgnnmknod/dev/vgnn/groupc640x010000

AddthevolumegroupentrybacktotheLVMconfigurationfiles:vgimportvsm/tmp/vgnn.map/dev/vgnn

Activatethenewlyimportedvolumegroup:vgchangeay/dev/vgnn

Backupthevolumegroupconfiguration:vgcfgbackup/dev/vgnn

18.MovingDisksWithinaSystem(LVMConfigurationwithLegacyDeviceFiles)

Makethevolumegroupanditsassociatedlogicalvolumesunavailabletousers:vgchangean/dev/vg_planning

PreviewtheremovalofthevolumegroupinformationfromtheLVMconfigurationfiles:vgexportpvsm/tmp/vg_planning.map/dev/vg_planning

Removethevolumegroupinformation:vgexportvsm/tmp/vg_planning.map/dev/vg_planning

Connectthediskstothenewsystemandcopythe/tmp/vg_planning.mapfiletothenewsystem.

CreatethevolumegroupDeviceFiles:mkdir/dev/vg_planningmknod/dev/vg_planning/groupc640x010000chownRroot:sys/dev/vg_planningchmod755/dev/vg_planningchmod640/dev/vg_planning/group

Getdevicefileinformationaboutthedisks:ioscanfunNCdisk

Importthevolumegroup:vgimportNvsm/tmp/vg_planning.map/dev/vg_planning

Activatethenewlyimportedvolumegroup:vgchangeay/dev/vg_planning

Tomovethedatainlogicalvolume/dev/vg01/marketsfromthedisk/dev/disk/disk4tothedisk/dev/disk/disk7:pvmoven/dev/vg01/markets/dev/disk/disk4/dev/disk/disk7

Tomovealldataoffdisk/dev/dsk/disk3andrelocateitatthedestinationdisk/dev/disk/disk5:pvmove/dev/disk/disk3/dev/disk/disk5

Tomovealldataoffdisk/dev/disk/disk3andletLVMtransferthedatatoavailablespacewithinthevolumegroup:pvmove/dev/disk/disk3

19.MovingDisksBetweenSystems

20.MovingDatatoaDifferentPhysicalVolume

21.ReplacingaMirroredNonBootDisk

Takenoteofthehardwarepathstothedisk:ioscanmlun/dev/disk/disk14

HaltLVMaccesstothediskIfthediskisnothotswappable,poweroffthesystemtoreplaceit.Ifthediskishotswappable,detachit:pvchangeaN/dev/disk/disk14

PhysicallyReplacethedisk.

Ifthesystemwasnotrebooted,Notifythemassstoragesubsystemthatthediskhasbeenreplaced:scsimgrreplace_wwidD/dev/rdisk/disk14

DeterminethenewLUNinstancenumberforthereplacementdisk:ioscanmlun

Inthisexample,LUNinstance28wascreatedforthenewdisk,withLUNhardwarepath64000/0xfa00/0x1c,devicespecialfiles/dev/disk/disk28 and /dev/rdisk/disk28, at the same lunpath hardware path as the old disk, 0/1/1/1.0x3.0x0. The old LUNinstance14fortheolddisknowhasnolunpathassociatedwithit.Ifthesystemwasrebootedtoreplacethefaileddisk,thenioscanmlundoesnotdisplaytheolddisk.

Assigntheoldinstancenumbertothereplacementdisk(thisassignstheoldLUNinstancenumber14tothereplacementdiskandthedevicespecialfilesforthenewdiskarerenamedtobeconsistentwiththeoldLUNinstancenumber):io_redirect_dsfd/dev/disk/disk14n/dev/disk/disk28ioscanmlun/dev/disk/disk14

RestoreLVMconfigurationinformationtothenewdisk:vgcfgrestoren/dev/vgnn/dev/rdisk/disk14

RestoreLVMaccesstothedisk(ifthediskishotswappable):pvchangeay/dev/disk/disk14

Ifthediskisnothotswappableandyouhadrebootthesystem,reattachthediskbyreactivatingthevolumegroupasfollows:vgchangeay/dev/vgnn


HaltLVMaccesstothediskIfthediskisnothotswappable,poweroffthesystemtoreplaceit.

Ifthediskishotswappable,disableuserandLVMaccesstoallunmirroredlogicalvolumes.

22.ReplacinganUnirroredNonBootDisk

Foreachunmirroredlogicalvolumeusingthediskkillalloftheprocessesaccessingthevolume:fusercudev/vg01/lvol1fuserkudev/vg01/lvol1umount/dev/vg01/lvol1

DisableLVMaccesstothedisk:pvchangeaN/dev/disk/disk14








Recoveranylostdata:LVMrecoversallthemirroredlogicalvolumesonthedisk,andstartsthatrecoverywhenthevolumegroupisactivated.ForalltheunmirroredlogicalvolumesthatyouidentifiedinStep2,restorethedatafrombackupandreenableuseraccess.Forrawvolumes,restorethefullrawvolumeusingtheutilitythatwasusedtocreateyourbackup.Thenrestarttheapplication.Forfilesystems,youmustrecreatethefilesystemsfirst:newfsFfstype/dev/vgnn/rlvolnn


HaltLVMaccesstothediskIfthediskisnothotswappable,poweroffthesystemtoreplaceit.Ifthediskishotswappable,detachit:pvchangeaN/dev/disk/disk14


23.ReplacingaMirroredBootDisk



Inthisexample,LUNinstance28wascreatedforthenewdisk,withLUNhardwarepath64000/0xfa00/0x1c,devicespecialfiles/dev/disk/disk28 and /dev/rdisk/disk28, at the same lunpath hardware path as the old disk, 0/1/1/1.0x3.0x0. The old LUNinstance14fortheolddisknowhasnolunpathassociatedwithit.Ifthesystemwasrebootedtoreplacethefaileddisk,thenioscanmlundoesnotdisplaytheolddisk.





Initializebootinformationonthedisk:lvlnbootvlvlnbootR/dev/vg00lvlnbootv

InitializethediskasanLVMdisk:pvcreate/dev/rdisk/disk3

Ensurethevolumegrouphasbeenactivated:vgchangeay/dev/vg01

Designateoneormorephysicalvolumesassparephysicalvolumeswithinthevolumegroup:vgextendzy/dev/vg01/dev/disk/disk3

Alternately,youcanchangeaphysicalvolumewithnoextentscurrentlyallocatedwithinitintoasparephysicalvolume:pvchangezy/dev/disk/disk3

24.CreatingaSpareDisk

Afterafaileddiskhasbeenrepairedoradecisionhasbeenmadetoreplaceit,followthesestepstoreinstateitandreturnthesparedisktoitsformerstandbystatus.

Physicallyconnecttheneworrepaireddisk.

RestoretheLVMconfiguration:vgcfgrestoren/dev/vg01/dev/rdisk/disk1

Ensurethevolumegrouphasbeenactivated:vgchangeay/dev/vg01

Besurethatallocationofextentsisnowallowedonthereplaceddisk:pvchangexy/dev/disk/disk1

Movethedatafromthesparetothereplacedphysicalvolume:pvmove/dev/disk/disk3/dev/disk/disk1

Thedatafromthesparediskisnowbackontheoriginaldiskoritsreplacement,andthesparediskisreturnedtoitsroleasastandbyemptydisk.

Tochangeadisktypefrombootabletononbootable,followthesesteps:

Usevgcfgrestoretodetermineifthevolumegroupcontainsanybootabledisks:vgcfgrestorelvnvg01

Runvgmodifytwice,oncewiththeBnandoncewithoutit.Comparetheavailablevaluesformax_peandmax_pv:vgmodifytBnvg01/dev/rdsk/c2t1d0vgmodifytvg01

Choosenewvaluesformax_peandmax_pv.Reviewthevaluesbyrunningvgmodifywiththenewsettingsandtheroption:vgmodifyrp6e56828Bnvg01/dev/rdsk/c2t1d0

Deactivatethevolumegroup:vgchangeanvg01

Committhechangesbyrunningvgmodifywithouttheroption:vgmodifyp6e56828Bnvg01/dev/rdsk/c2t1d0

Activatethevolumegroup:

25.ReinstatingaSpareDisk

26.ChangingPhysicalVolumeBootTypes

vgchangeayvg01

Runthevgcfgrestoreorpvdisplaycommandstoverifythatthedisktypehaschanged:vgcfgbackupvg01vgcfgrestorelvnvg01

Todetachalinktoaphysicalvolume:pvchangean/dev/disk/disk33

IfyouareusingLVM'salternate links formultipatheddisks,each linkusesadifferent legacydevice files. In thatsituation, todetachalllinkstoaphysicalvolume,useNastheargumenttotheaoption:pvchangeaN/dev/dsk/c5t0d0

Toreattachaspecificpathtoaphysicalvolume:pvchangeay/dev/dsk/c5t0d0

Because detaching a link to a physical volume is temporary, all detached links in a volume group are reattached when thevolumegroupisactivated,eitheratboottimeorwithanexplicitvgchangecommand:vgchangeay/dev/vg02

WithnonLVMdisks,asinglerootdiskcontainsalltheattributesneededforboot,systemfiles,primaryswap,anddump.UsingLVM,asinglerootdiskisreplacedbyapoolofdisks,arootvolumegroup,whichcontainsallofthesameelementsbutallowinga root logical volume, a boot logical volume, a swap logical volume, and one ormore dump logical volumes. Each of theselogicalvolumesmustbecontiguous,thatis,containedonasingledisk,andtheymusthavebadblockrelocationdisabled.

If you newly install your HPUX system and choose the LVM configuration, a root volume group is automatically configured(/dev/vg00),asareseparateroot(/dev/vg00/lvol3)andboot(/dev/vg00/lvol1) logicalvolumes.Ifyoucurrentlyhaveacombinedroot and boot logical volume and you want to reconfigure to separate them after creating the boot logical volume, usethelvlnbootcommandwiththeboptiontodefinethebootlogicalvolumetothesystem,takingeffectthenexttimethesystemisbooted.

Ifyoucreateyourrootvolumegroupwithmultipledisks,usethe lvextendcommandtoplacetheboot, root,andprimaryswaplogicalvolumesonthebootdisk.

Youcanusepvmovetomovethedata fromanexisting logicalvolumetoanotherdisk ifnecessary tomakeroomfor therootlogicalvolume.

27.EnablingandDisablingaPathtoaPhysicalVolume

28.CreatinganAlternateBootDisk

Createabootablephysicalvolume:OnanHPIntegrityserver,partitionthediskusingtheidiskcommandandapartitiondescriptionfile,thenruninsf.

RunpvcreatewiththeBoption.OnanHPIntegrityserver,usethedevicefiledenotingtheHPUXpartition:pvcreateB/dev/rdisk/disk6_p2

OnanHP9000server,usethedevicefilefortheentiredisk:pvcreateB/dev/rdisk/disk6

Createadirectoryforthevolumegroup:mkdir/dev/vgrootmknod/dev/vgroot/groupc640xnn0000

Createtherootvolumegroup,specifyingeachphysicalvolumetobeincluded:vgcreate/dev/vgroot/dev/disk/disk6

Placebootutilitiesinthebootarea:mkboot/dev/rdisk/disk6

Addanautobootfiletothediskbootarea:mkboota"hpux"/dev/rdisk/disk6

Createthebootlogicalvolume:lvcreateCyrnnbootlv/dev/vgroot#lvextendL512/dev/vgroot/bootlv/dev/disk/disk6

Createtheprimaryswaplogicalvolume:lvcreateCyrnnswaplv/dev/vgroot#lvextendL2048/dev/vgroot/swaplv/dev/disk/disk6

Createtherootlogicalvolume:lvcreateCyrnnrootlv/dev/vgroot#lvextendL1024/dev/vgroot/rootlv/dev/disk/disk6

Specifythatbootlvisthebootlogicalvolume:lvlnbootb/dev/vgroot/bootlv

Specifythatrootlvistherootlogicalvolume:lvlnbootr/dev/vgroot/rootlv

Specifythatswaplvistheprimaryswaplogicalvolume:lvlnboots/dev/vgroot/swaplv

Specifythatswaplv:lvlnbootd/dev/vgroot/swaplv

Verifytheconfiguration:lvlnbootv/dev/vgroot

Oncethebootandrootlogicalvolumesarecreated,createfilesystemsforthem:mkfsFhfs/dev/vgroot/rbootlv

ORmkfsFvxfs/dev/vgroot/rrootlv

OnHPIntegrityservers,thebootfilesystemcanbeVxFS:

mkfsFvxfs/dev/vgroot/rbootlv

Afteryoucreatemirrorcopiesoftheroot,boot,andprimaryswaplogicalvolumes,ifanyoftheunderlyingphysicalvolumesfail,thesystemcanusethemirrorcopyontheotherdiskandcontinue.Whenthefaileddiskcomesbackonline,itisautomaticallyrecovered,providedthesystemhasnotbeenrebooted.

If thesystemrebootsbeforethedisk isbackonline,reactivatethevolumegrouptoupdatetheLVMdatastructuresthat trackthediskswithinthevolumegroup.Youcanusevgchangeayeventhoughthevolumegroupisalreadyactive.

Toreactivatevolumegroupvg00:vgchangeay/dev/vg00

Asaresult,LVMscansandactivatesallavailabledisksinthevolumegroupvg00,includingthediskthatcameonlineafterthesystemrebooted.

Theprocedureforcreatingamirrorof thebootdisk isdifferentforHP9000andHPIntegrityservers.HPIntegrityserversusepartitionedbootdisks.

Makesurethedevicefilesareinplace:insfeH0/1/1/0.0x1.0x0

Createabootablephysicalvolume:pvcreateB/dev/rdisk/disk4

Addthephysicalvolumetoyourexistingrootvolumegroup:vgextend/dev/vg00/dev/disk/disk4

Placebootutilitiesinthebootarea:mkboot/dev/rdisk/disk4


The logical volumeson themirrorbootdiskmustbeextended in thesameorder that theyareconfiguredon theoriginalbootdisk.Determinethelistoflogicalvolumesintherootvolumegroupandtheirorder:pvdisplayv/dev/disk/disk0|grep'current.*0000$'

29.MirroringtheBootDisk

30.MirroringtheBootDiskonHP9000Servers

Mirroreachlogicalvolumeinvg00(therootvolumegroup)ontothespecifiedphysicalvolume:lvextendm1/dev/vg00/lvol1/dev/disk/disk2_p2lvextendm1/dev/vg00/lvol2/dev/disk/disk2_p2lvextendm1/dev/vg00/lvol3/dev/disk/disk2_p2lvextendm1/dev/vg00/lvol4/dev/disk/disk2_p2lvextendm1/dev/vg00/lvol5/dev/disk/disk2_p2lvextendm1/dev/vg00/lvol6/dev/disk/disk2_p2lvextendm1/dev/vg00/lvol7/dev/disk/disk2_p2lvextendm1/dev/vg00/lvol8/dev/disk/disk2_p2lvsyncT/dev/vg00/lvol*

Updatetherootvolumegroupinformation:lvlnbootR/dev/vg00lvlnbootv

Specifythemirrordiskasthealternatebootpathinnonvolatilememory:setboota0/1/1/0.0x1.0x0

Addalineto/stand/bootconfforthenewbootdisk:vi/stand/bootconfl/dev/disk/disk4

CreateaPartitionDescriptionFile:vi/tmp/idf

Partitionthedisk:idiskf/tmp/idfw/dev/rdisk/disk2

Checkthepartitionslayout:idisk/dev/rdisk/disk2

Createthedevicefilesforallthepartitions:insfeH0/1/1/0.0x1.0x0

CreateabootablephysicalvolumeusingthedevicefiledenotingtheHPUXpartition:pvcreateB/dev/rdisk/disk2_p2

Addthephysicalvolumetoyourexistingrootvolumegroup:vgextendvg00/dev/disk/disk2_p2

Placebootutilitiesinthebootarea.CopyEFIutilitiestotheEFIpartition,andusethedevicespecialfilefortheentiredisk:mkbootel/dev/rdisk/disk2


The logical volumeson themirrorbootdiskmustbeextended in thesameorder that theyareconfiguredon theoriginalboot

31.MirroringtheBootDiskonHPIntegrityServers

disk.Determinethelistoflogicalvolumesintherootvolumegroupandtheirorder:pvdisplayv/dev/disk/disk0_p2|grep'current.*0000$'

Mirroreachlogicalvolumeinvg00(therootvolumegroup)ontothespecifiedphysicalvolume:lvextendm1/dev/vg00/lvol1/dev/disk/disk2_p2lvextendm1/dev/vg00/lvol2/dev/disk/disk2_p2lvextendm1/dev/vg00/lvol3/dev/disk/disk2_p2lvextendm1/dev/vg00/lvol4/dev/disk/disk2_p2lvextendm1/dev/vg00/lvol5/dev/disk/disk2_p2lvextendm1/dev/vg00/lvol6/dev/disk/disk2_p2lvextendm1/dev/vg00/lvol7/dev/disk/disk2_p2lvextendm1/dev/vg00/lvol8/dev/disk/disk2_p2lvsyncT/dev/vg00/lvol*

Iflvextendfailswiththemessage"m:illegaloptionHPMirrorDisk/UXisnotinstalled".

Updatetherootvolumegroupinformation:lvlnbootR/dev/vg00lvlnbootv

Specifythemirrordiskasthealternatebootpathinnonvolatilememory:setboota0/1/1/0.0x1.0x0

Addalineto/stand/bootconfforthenewbootdisk:vi/stand/bootconfl/dev/disk/disk2_p2

Youcansplit amirrored logical volume into two logical volumes toperformabackuponanofflinecopywhile theother copystaysonline.Whenyoucompletethebackupoftheofflinecopy,youcanmergethetwologicalvolumesbackintoone.Tobringthe twocopiesback insynchronization,LVMupdates thephysicalextents in theofflinecopybasedonchangesmade to thecopythatremainedinuse.

YoucanuseHPSMHtosplitandmergelogicalvolumes,orusethelvsplitandlvmergecommands.

Tobackupamirroredlogicalvolumecontainingafilesystem,usinglvsplitandlvmerge,followthesesteps:

Splitthelogicalvolume/dev/vg00/lvol1intotwoseparatelogicalvolumes:lvsplit/dev/vg00/lvol1

Performafilesystemconsistencycheckonthelogicalvolumetobebackedup:fsck/dev/vg00/lvol1b

Mountthefilesystem:mkdir/backup_dirmount/dev/vg00/lvol1b/backup_dir

Performthebackup.

32.BackingUpaMirroredLogicalVolume

Unmountthefilesystem:umount/backup_dir

Mergethesplitlogicalvolumebackwiththeoriginallogicalvolume:lvmerge/dev/vg00/lvol1b/dev/vg00/lvol1

If youbackup your volumegroup configuration, you can restore a corruptedor lost LVMconfiguration in the event of a diskfailureorcorruptionofyourLVMconfigurationinformation.

Itisimportantthatvolumegroupconfigurationinformationbesavedwheneveryoumakeanychangetotheconfigurationsuchasaddingor removingdisks toavolumegroup,changing thedisks inarootvolumegroup,creatingor removing logicalvolumes,extendingorreducinglogicalvolumes,etc...

Bydefault,vgcfgbackupsavestheconfigurationofavolumegrouptothefile/etc/lvmconf/volume_group_name.conf.

BackupConfiguration:vgcfgbackupfpathname/filenamevolume_group_name

Torunvgcfgrestore,thephysicalvolumemustbedetached.

RestoreConfiguration(usingthedefaultbackupfile/etc/lvmconf/vgsales.conf):pvchangean/dev/disk/disk5vgcfgrestoren/dev/vgsales/dev/rdisk/disk5pvchangeay/dev/disk/disk5

If thephysicalvolumeisnotmirroredor themirrorcopiesarenotcurrentandavailable,youmustdeactivatethevolumegroupwithvgchange,performthevgcfgrestore,andactivatethevolumegroup:vgchangean/dev/vgsalesvgcfgrestoren/dev/vgsales/dev/rdisk/disk5vgchangeay/dev/vgsales

Ifyouplantouseadiskmanagementutilitytocreateabackupimageorsnapshotofallthedisksinavolumegroup,youmustmakesure thatLVM isnotwriting toanyof thediskswhen thesnapshot isbeing takenotherwise, somediskscancontainpartiallywrittenorinconsistentLVMmetadata.

Tokeepthevolumegroupdiskimageinaconsistentstate,youmusteitherdeactivatethevolumegrouporquiesceit.

33.BackingUpandRestoringVolumeGroupConfiguration

34.QuiescingandResumingaVolumeGroup

Deactivatingthevolumegrouprequiresyoutocloseallthelogicalvolumesinthevolumegroup,whichcanbedisruptive.Quiescingthevolumegroupenablesyoutokeepthevolumegroupactivatedandthelogicalvolumesopenduringthesnapshotoperation,minimizingtheimpacttoyoursystem.

Youcanquiescebothreadandwriteoperationstothevolumegroup,orjustwriteoperations.Whileavolumegroupisquiesced,thevgdisplaycommandreportsthevolumegroupaccessmodeasquiesced.The indicated I/O operations queue until the volume group is resumed, and commands that modify the volume groupconfigurationfailimmediately.

Bydefault,thevolumegroupremainsquiesceduntilitisexplicitlyresumed.Youcanspecifyamaximumquiescetimeinsecondsusingthetoptionofthevgchangecommand:ifthequiescetimeexpires,thevolumegroupisresumedautomatically.ThevgchangeQoptionindicatesthequiescingmode,whichcanberw.

Toquiesceavolumegroupforamaximumoftenminutes(600seconds):vgchangeQwt600vg08

Toresumeaquiescedvolumegroup:vgchangeRvg08

Addamirrorcopytoalogicalvolume:lvextendm1/dev/vg00/lvol1

Addamirrorcopytoalogicalvolumeforcingitontoaspecifiedphysicaldisk:lvextendm1/dev/vg00/lvol1/dev/disk/disk4

Toremovemirrorcopiesreducingitto0copies:lvreducem0/dev/vg00/lvol1

Toremovemirrorcopiesreducingitto1copy:lvreducem1/dev/vg00/lvol1

Toremovethemirrorcopyfromaspecificdiskreducingitto0copies:lvreducem0/dev/vg00/lvol1/dev/disk/disk4

35.AddingaMirrortoaLogicalVolume

36.RemovingaMirrorfromaLogicalVolume

Becauseof thecontiguousallocationpolicy,youcannotextendtheswap logicalvolume:soto increasetheprimaryswapyoucreateabiggerlogicalvolumeandmodifytheBootDataReservedArea(BDRA)tomakeitprimary.

Createthelogicalvolumeonthevolumegroupvg00:lvcreateCyL240/dev/vg00

Asthenameofthisnewlogicalvolumewillbedisplayedonthescreen,noteit:itwillbeneededlater.Toeasetheexample,we'llassumenowthenameofthenewvolumeis/dev/vg00/lvol8.

Displaythecurrentrootandswaplogicalvolumes(lvol2isthedefaultprimaryswap):lvlnbootv/dev/vg00

Specifylvol8istheprimaryswaplogicalvolume:lvlnboots/dev/vg00/lvol8/dev/vg00

RecoveranymissinglinkstoallofthelogicalvolumesintheBDRAandupdatetheBDRAofeachbootablephysicalvolumeinthevolumegroup.Updatetherootvolumegroupinformation:lvlnbootR/dev/vg00

Rebootthesystem:init6

Listthedisks/LUNs:ioscanfunCdisk

Someofthedevicesyouseeintheoutputoftheprevioscommandwillbeallocated,somewillnot.

Listallofthephysicalvolumedandtheirdevicesforalloftheexistingvolumegroups:vgdisplayvvgdisplayv|grepPV

Thisisalistofthedevicesthatareinuse(astheyarepartofavolumegroup).

Now,comparethetwooutputs:anydevicethat'sintheioscanoutput,butNOTinthevgdisplayoutputareavailableforuse.

Youcanautomatethisprocessbyusingsed,awkandgrep.

1.Createafile(herenamedwte_hitachi_disk)listingallofthedisksthatcanbeused(inthisexampleHITACHI):

37.IncreasingthePrimarySwap

38.IdentifyingAvailableDiskstobeUsedinaVolumeGroup

ioscanfnCdisk>>wte_disk_ioscancat wte_disk_ioscan | sed 1,2d | grep v e TOSHIBA e c2t0d0 | xargs n 10 | grep HITACHI | grep vi subsystem >>wte_hitachi_disk

1. CreateafilecontainingtheioscanfnCdiskoutput2. catwilloutputthefilecontainingthediskioscan3. seddeletesthefirst2headerlinesofthefile4. grepprintsoutanylinesthatDONOTincludeTOSHIBAorc2t0d05. xargsgroupstheoutputintogroupsof106. NextgrepfindsallofthelineswithHITACHIinthem7. AllofthelinesthathaveHITACHIinthemaresavedtothefilewte_hitachi_disk

2. Refine the ioscan of HITACHI disks to include just the disk devices, sorted this is a list of all HITACHI disks on thesystem:awk'{print$9}'wte_hitachi_disk|sortu>wte_hitachi_sorted_u

1. awkprintsjustthe9thfieldofthefile2. sortusortsthefileandsurpressesanyduplicates3. Thisissavedtothesortedfilewte_hitachi_sorted_u.

Printalistofallthedisksthatarecurrentlybeingused(alistofPVs):vgdisplayv|grep"PVName">wte_pvdisk_used

1. vgdisplayvprintsaverboselistingofallvolumegroups2. greponlyprintslinesthatcontainPVName3. ThelistofPVsissavedtothefilewte_pvdisk_used.

Refinethelistofdisksthatarebeingused:awk'{print$3}'wte_pvdisk_used|sortu>wte_pvdisk_sorted_u

1. awkprintsonthe3rdfield(thediskdevice)2. sortsortsthelist,surpressinganyduplicateentries3. Theresultsaresavedtothefilewte_pvdisk_sorted_u.

ComparethetwofilesthelistofalltheHitachidisksonthesystemwiththelistofalldisksbeingused:diffwte_hitachi_sorted_uwte_pvdisk_sorted_u

1. diffcomparesthetwofilesandprintsoutanydifferences.Thedifferencewillbeoneormoredisksthat thesystemsees,butthatarenotbeingusedbyLVM.

ImagineanSC10rackwith2controllers.Someofthedisksareon1controller,someonthecontroller2.Forhighavailabilityyouwould want a logical volume to be created on a disk that is on one controller and mirrored on a disk that is on anothercontroller.However,theconceptof"controller"isunknowninLVM.

39.CreatingaPhysicalVolumeGroup(PVG)

HencePVG's.Youcreateoneforthedisksononecontroller,anotheroneforthedisksontheothercontroller,thenyoumakelogicalvolumesPVGstrict(lvchangesg...).

PVGsincreasenotonlyI/Ohighavailabilitybutalsoperformance.

ByusingPVGsphysicalvolumescanbegroupedbycontrollers: then logicalvolumescanbecreatedondifferentPVGs.ThiswayPVGsallowtoknowwhereeachdiskisandwhatchannelstomirrordown,sowithcarefulplanninganddiligentuseoftheLVMcommandsyoucanensureI/OseparationwithoutusingLVM.

Description:raphics/06fig01.jpg

Youcanusetwomirroringtypes.

Cleanmirror:WhencreatingthevolumegroupyouwouldsetitupbyputtingAandBinPVG1,andCandDinPVG2:youdothisbyusing"g"option involumegroupcreation todefine thePVGname.Whencreating logicalvolumesyoumay tomirror (forexample)1copy,youcanput themirroredcopy inaseparatePVGso thatyourmirroredcopiesarealways inPVG2, forexample.Thiswould help in disaster recovery situation. The lvcreatecommandhas "sg" option to setup a PVGstrict mirror. To extend alogicalvolumeyouissueastraightforwardlvextendsinceitwasalreadydefinedasPVGstrict.

Dirtymirror:Thevolumegroupissetupinanormalmanner.Whencreatinglogicalvolumes,ifyousetuptomirror1copyanddonotspecifytoLVMwheretoputitsmirroredcopythenyoumayendupinasiuationwherebythemirroredcopycanresideanywhereinA,B,C,D,evenonthediskwheretheprimarycopyresides.Soyoucanactuallyinstructlvextendtoputthemirrorcopyonaspecificdisk,butthenyouwouldhavetokeeptrackofthePEs,etc...IfPVGissetupthisisdoneautomatically.

Tocreateaphysicalvolumegroup(PVG)createafilenamed/etc/lvmpvgwiththefollowingsyntax:VGvg_namePVGpvg_namepv_path...PVGpvg_namepv_path...VGvg_namePVGpvg_namepv_path[...]

Forexample,tousetwoPVGsinvg01withc1t6d0andc2t6d0inonePVG(PVG0),c3t6d0andc4t6d0intheotherPVG(PVG1)thecontentsofthefile/etc/lvmpvgshouldbe:VG/dev/vg01PVGPVG0/dev/dsk/c1t6d0/dev/dsk/c2t6d0PVGPVG1/dev/dsk/c3t6d0/dev/dsk/c4t6d0

Thencreatethephysicalvolumegroups:vgcreategpvg1/dev/vgname/dev/dsk/c5t8d0/dev/dsk/c5t9d0vgextendgpvg2/dev/vgname/dev/dsk/c7t1d0/dev/dsk/c7t2d0vgdisplayvvgname

If thesystemonwhichyou'recreatingthevolumegroupisanodeofanHPServiceGuardCluster, thenyouhavetopresentthe new structure to the cluster tomake it aware of it.To do this follow the steps about deploying LVM configuration onHPServiceGuardClusternodesattheendofthesection"CreatingaVolumeGroup".

Aftercreatingthe/etc/lvmpvgfileasdescribeaboveintheprevioussection,eachcopyofthemirroryoucreatecouldbeforceondifferentPVG.

Tocreatealogicalvolumeinthephysicalvolumegroup:lvcreatem1nvolume_nameLsize_in_mbsg/dev/pvg_namelvdisplayvlvhome

To create a RAID 0 + 1 you need at least two disks in each PVG, then you use the "s g & D Y" options ofthelvcreatecommandduringthelogicalvolumecreation.

Ifthelogicalvolumeisalreadycreatedbutnotmirroredyet,issuethefollowingcommand:lvchangesg/dev/vg01/lvhomelvextendm1/dev/vg01/lvhomelvdisplayvlvhome


40.Creating(Mirroring)LogicalVolumesonSpecificPhysicalVolumes

Download - HP-UX LVM, Disk and FileSystem Tasks

Top Related