EL-MF877-00 Page 1 Template Revision C
Last revalidation date 09-May-2018
HPI instructions for this template are available at EL-MF877-01
Product End-of-Life Disassembly Instructions Product Category: Notebooks and Tablet PCs
Marketing Name / Model [List multiple models if applicable.]
HP Elite Dragonfly Notebook PC
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HPI products to remove components and materials requiring selective treatment, as defined by EU directive 2012/19/EC, Waste Electrical and Electronic Equipment (WEEE). NOTE: Recyclers should sort plastic materials into resin streams for recycling based on the ISO 11469 plastic marking code on the plastic part. For any questions on plastic marking, please contact HP’s Sustainability Contact.
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment. 1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable.
Item Description Notes
Quantity of items included in product
Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA)
With a surface greater than 10 sq cm
1
Batteries, excluding Li-Ion batteries. All types including standard alkaline, coin or button style batteries
1
Li-Ion batteries. Include all Li-Ion batteries if more than one is provided with the product (such as a detachable notebook keyboard battery, RTC coin cell, etc.)
Battery(ies) are attached to the product by (check all that apply with an “x” inside the “[ ]”): [X] screws [ ] snaps [ ] adhesive [ ] other. Explain NOTE: Add detailed removal procedures including required tools in the sections 3.1 and 3.2.
1
Mercury-containing components For example, mercury in lamps, display backlights, scanner lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface greater than 100 sq cm
Includes background illuminated displays with gas discharge lamps
0
Cathode Ray Tubes (CRT) 0
Capacitors / condensers (Containing PCB/PCT) 0
Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height
0
External electrical cables and cords DC Cable for External Power Supply 1
Gas Discharge Lamps 0
Plastics containing Brominated Flame Retardants weighing > 25 grams (not including PCBs or PCAs
0
EL-MF877-00 Page 2 Template Revision C
Last revalidation date 09-May-2018
HPI instructions for this template are available at EL-MF877-01
Item Description Notes
Quantity of items included in product
already listed as a separate item above)
Components and parts containing toner and ink, including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent chambers, and service stations.
0
Components and waste containing asbestos 0
Components, parts and materials containing refractory ceramic fibers
0
Components, parts and materials containing radioactive substances
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed.
Tool Description Tool Size (if applicable)
Electric screwdriver (Cross) Cross, #1
Screwdriver #2
Screwdriver #3
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment including the required steps to remove the external enclosure:
1. Follow steps described in Disassembly instruction (file attached) 2. If parts can be removed without using a tool, remove it first 3. Use correct screwdriver and torque value before unlock the screw. 4. 5. 6. 7. 8. 9. 10.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations).
MANUFACTURING PROCESS INSTRUCTIONS
MECHANICAL ASSEMBLY MODEL : Empire
制表: 朱亚 审核:赵承阳
1.00
Station Version Station Version Station Version Station Version Station Version Station Version
1 1.00 9 1.00 17 1.00 25 1.00
2 1.01 10 1.00 18 1.00 26 1.00
3 1.00 11 1.00 19 1.00 27 1.00
4 1.00 12 1.00 20 1.00 28 1.00
5 1.00 13 1.00 21 1.00
6 1.00 14 1.00 22 1.00
7 1.00 15 1.00 23 1.00
8 1.00 16 1.00 24 1.00
Station Ver.
ALL 1.**
2 1.01
Sub-assembly name: Empire FA 拆机 SOP
Document No.: Empire FA 拆机 SOP
A.Current station version list:
B.Version Modify list:
Written by: 翁信茂 Revision:
Date: 2019/9/18
Design
1 of 32Page:
ContentDate
首份SOP製作 夏宗全2019/8/20
2019/9/18 内容更新 夏宗全
SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step:
Attention︰ Pls inform the OP assistant immediately once there is any abnormal
Editor:
Publish: Zhu Ya IE
Loose srew from the buttom case
1. Loose T5 Screw (6052B0473701) *5 from the bottom case。
Torque value:2.0 ± 0.1Kgf.cm
The screw cannot be slipped
1(1/1)
Cross electric low speed screwdriver T5 1
1
2
3
4
5
2019/8/20 1.00
SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step:
Attention︰ Pls inform the OP assistant immediately once there is any abnormal
Editor:
Publish: Zhu Ya IE
Remove the Top case & Bottom case
1. Absorb the icon area with suction cup, and disassemble from the upper left corner/ Upper
side
2. Follow the arrow and queue 1-2-3, disassemble upper side and left/right side
Absorb the icon area with suction cup , be care the middle hook, avoid destroy the bottom
case
3. Base on the bottom side , disassemble C case and bottom case Rotatingly.
4. Recycle the bottom case(6070B1587501)
2(1/1)
Note: Absorb lightly,
avoid destroy the
bottom case
icon area
suction cup 1
2019/9/18 1.01
Pull the bottom case lightly
from upper side ,separate
the hook between C case
and bottom case
1 Suction cup absorb & disassemble upper side hook
2
3 3
Key station
SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step:
Attention︰ Pls inform the OP assistant immediately once there is any abnormal
Editor:
Publish: Zhu Ya IE
Loose Battery screw
3(1/1)
Cross electric low speed screwdriver #0 1
1. Loose screw M2 x 3L (6052B0185401) * 5 。
Torque value1.5 ± 0.2Kgf.Cm
The screw cannot be slipped and should not fall into the machine
3 5
1
4 2
2019/8/20 1.00
SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step:
Attention︰ Pls inform the OP assistant immediately once there is any abnormal
Editor:
Publish: Zhu Ya IE
1. Loose battery screw(6052B0185401) 1、2、3、4
Torque value1.5 ± 0.2Kgf.Cm
The screw cannot be slipped and should not fall into the machine.
2. Disassemble battery CNTR, Recycle battery
Pull out the CNTR horizontally
3. Recycle K-LOCK(6053B1668401)
4(1/1)
Loose screw , disassemble battery
Cross electric low speed screwdriver #0 1
1
2
3
4
6027B0160901 4cell,56W
6027B0160601 4cell,56W
6027B0162901 2cell,38W
K-lock
2019/8/20 1.00
SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step:
Attention︰ Pls inform the OP assistant immediately once there is any abnormal
Editor:
Publish: Zhu Ya IE
5(1/1)
Remove gasket, Disassemble WWAN
FOR WWAN model
1.Remove gasket(6054B2006001)*2
2. Disassemble WWAN tip
图一
图二
2019/8/20 1.00
SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step:
Attention︰ Pls inform the OP assistant immediately once there is any abnormal
Editor:
Publish: Zhu Ya IE
Disassemble shielding,Remove WWAN cable
6(1/1)
1.Disassemble MB ZIF Shielding(6053B1667501)&WWAN ZIF shielding(6053B1668101) ,and
Recycle them
2.Follow the arrow , Disassemble the WWAN cable until the MB location
MB ZIF Shielding
6053B1667501 WWAN ZIF Shielding
6053B1668101
FOR WWAN model
Disassemble point
Disassemble point
2019/8/20 1.00
SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step:
Attention︰ Pls inform the OP assistant immediately once there is any abnormal
Editor:
Publish: Zhu Ya IE
Disassemble the Fan
7(1/2)
1. Take out the SET screw* 3 (Picture1)。
Screwdriver #0
Twisting force value :1.5 ± 0.1 Kg/cm
Make sure the screw can’t loose
2. Disassemble FAN cable CNTR(Picture 2)
3. Recycle FAN(excel 1) 。
1
2
3
Picture 1
Screwdriver 0# 1
Vendor PN
Sunon 6033B0073001(normal)
Delta 6033B0072801 (normal)
Delta Titanium 6033B0072701(light)
Excel 1
Avoid
BOSS
pillar
Picture 2
2019/8/20 1.00
SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step:
Attention︰ Pls inform the OP assistant immediately once there is any abnormal
Editor:
Publish: Zhu Ya IE
Pay attention the way to take out Fan
7(2/2)
1. The right way take out:hold the edge of fan
(Picture 1)
2. Wrong way (Picture 2)
Don’t press Fan frame
Don’t press Fan and flabellum
Don’t take out Fan cable directly Picture 1
Hold edge/ hold Frame edge
Picture 2
2019/8/20 1.00
SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step:
Attention︰ Pls inform the OP assistant immediately once there is any abnormal
Editor:
Publish: Zhu Ya IE
EX
CP
1.Disassemble FPR FFC(6035B0195601 Cvilux 瀚荃/ 6035B0198801Jiudong)
2.Disassemble Click Pad FFC(6035B0196001 Cvilux / 6035B0198601 Jiudong)
8(1/1)
Disassemble K/B FPC & FPR FFC
Finger FFC
FPR
CP FFC Picture 1
EX
2019/8/20 1.00
SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step:
Attention︰ Pls inform the OP assistant immediately once there is any abnormal
Editor:
Publish: Zhu Ya IE
1. Disassemble the left and right Speaker cable CNTR。
Put the CNTR out by level
9(1/2)
Disassemble Speaker Cable
Picture 1
put Spk
cable into U
groove as
marked
Spk cable avoid
boss pilar
2019/8/20 1.00
SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step:
Attention︰ Pls inform the OP assistant immediately once there is any abnormal
Editor:
Publish: Zhu Ya IE
9(2/2)
Disassemble KB FFC CNTR
1. Disassemble KB FPC CNTR(Picture 1)
Picture 1
2019/8/20 1.00
SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step:
Attention︰ Pls inform the OP assistant immediately once there is any abnormal
Editor:
Publish: Zhu Ya IE
1. Disassemble K/B B/L FFC
2. Disassemble extend FPC CNTR
3. Disassemble extend FPC(6046B0113701CMI / 6046B0119201Chuanyi), Recycle it
10(1/1)
Disassemble Extend FPC& BL FPC
Picture 1
KB BL CNTR Extend FPC CNTR
2019/8/20 1.00
SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step:
Attention︰ Pls inform the OP assistant immediately once there is any abnormal
Editor:
Publish: Zhu Ya IE
Disassemble power FFC/ touch cable
11(1/1)
1.Disassemble power FFC CNTR
2.Disassemble touch cable CNTR
Touch CNTR
2019/8/20 1.00
SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step:
Attention︰ Pls inform the OP assistant immediately once there is any abnormal
Editor:
Publish: Zhu Ya IE
12(1/1)
Disassemble wlan and CCD cable
1. Pick thermal mylar(6054B2210001)Picture 1
2. Disassemble wlan CNTR and CCD CNTR
Ionizer 1
Picture 1
Picture 2
2019/8/20 1.00
Key station
SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step:
Attention︰ Pls inform the OP assistant immediately once there is any abnormal
Editor:
Publish: Zhu Ya IE
1.Disassemble SSD shielding(6053B1667801) and SSD mylar(6054B1547701),and recycle
2. Take out SSD&WWAN screw M2 x 2L (6052B0156201)*2
Twisting force value :1.5 ± 0.1Kgf.cm
Make sure the screw can’t loose,can’t be dropped into the units
3. Disassemble SSD and WWAN,recycle them
13(1/1)
Disassemble the SSD and WWAN
Screwdriver #0 1
Picture 1
Picture 2 Picture 3
2019/8/20 1.00
SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step:
Attention︰ Pls inform the OP assistant immediately once there is any abnormal
Editor:
Publish: Zhu Ya IE
1. Take out Audio/B(1310A3075301) screw( M2x3L 6052B0185401)*2 。
Twisting force value :1.5 ± 0.1Kgf.cm
Make sure the screw can’t loose,can’t be dropped into the units
2. Disassemble audio/B MB side CNTR,take out audio/B recycle
3.Take down the washer of MB
14(1/1)
Disassemble Audio/B
图一
Picture 1
Screwdriver #0 1
2019/8/20 1.00
SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step:
Attention︰ Pls inform the OP assistant immediately once there is any abnormal
Editor:
Publish: Zhu Ya IE
FOR WWAN platforms
1. Sort the WWAN cable(Picture 1)
2. Disassemble WWAN FFC CNTR,and open the marked red gum (Picture 2)
FFC should be assembled in right place, should not be take off
FOR all platforms
1.Disassemble the LCM cable and CNTR which near MB
Take out the CNTR on level
15(1/1)
Picture 1
Disassemble WWAN and FFC,LCM Cable
Picture 2
2019/8/20 1.00
Key station
SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step:
Attention︰ Pls inform the OP assistant immediately once there is any abnormal
Editor:
Publish: Zhu Ya IE
1. Take out the USB/B screw M2 x 3L (6052B0185401) * 3 (Picture 1/2)。
Twisting force value :1.5 ± 0.1Kgf.Cm
Make sure the screw can’t loose,can’t be dropped into the units
Order:1→2→3
2.Take out the USB/B,disassemble the USB/B and FPC CNTR,recycle the USB/B
Take out the USB/B from the under cut direction
When disassemble the USB CNTR,FPC and CNTR should have about 10° angle
16(1/1)
Screwdriver #0 1
Disassemble USB/B
Picture 1
3 1
2
WWAN NON-WWAN Picture2
1
2
3
2019/8/20 1.00
SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step:
Attention︰ Pls inform the OP assistant immediately once there is any abnormal
Editor:
Publish: Zhu Ya IE
1.Open USB/B CNTR
2. Take out WWAN USB FPC(6035B0195201CMI / 6035B0199201 Chuanyi)or WLAN USB
FPC(6035B0195301CMI / 6035B0199301Chuanyi),Recycle them
When disassemble the FPC and CNTR,there should be 10° angle
17(1/1)
Take out USB/B FPC
Picture 3
Picture 4
MB
MB
Picture 5
Ionizer
1
2019/8/20 1.00
SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step:
Attention︰ Pls inform the OP assistant immediately once there is any abnormal
Editor:
Publish: Zhu Ya IE
1. Take out the M/B screw M2 x 3L (6052B0185401) * 3 (Picture 1)。
Twisting force value :1.5 ± 0.1Kgf.Cm
Make sure the screw can’t loose,can’t be dropped into the units
Order:1→2→3
When assemble the 3th screw, take care the LCM cable, can’t damage it
2.Disassemble MB
Take out MB slantly
Take care when disassemble MB to avoid damage it
18(1/1)
Screwdriver #0 1
Picture1
Disassemble MB
3
1
2
2019/8/20 1.00
Key station
Key station
SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step:
Attention︰ Pls inform the OP assistant immediately once there is any abnormal
Editor:
Publish: Zhu Ya IE
1
2
3
4
1. Put the MB on Thermal assemble fixture,and put on the cover。
2. Take the thermal SET screw*4 by turn (Picture 1)
Screwdriver #0
Twisting force value :1.0 ± 0.1 Kg/cm
Make sure the screw can’t loose
3.Recycle thermal into magazine
Take care to take the thermal,don’t damage the thermal to change shape
4.Take out MB ,disassemble USB Type-C Shielding CAM (6053B1668001),separate the shielding and MB in different box
Disassemble it from the triangle location
Take care to avoid damage the component
Disassemble MB& thermal& shielding
19(1/1)
Thermal Module assemble fixture 1
Screwdriver 0# 1
Picture 1
Excel 1
Category Vendor PN
Cu Heatpipe CCI 6043B0264001
Cu Heatpipe Delta 6043B0264011
2019/8/20 1.00
SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step:
Attention︰ Pls inform the OP assistant immediately once there is any abnormal
Editor:
Publish: Zhu Ya IE
1. Disassemble the PC card (6051B1313801) from snap joint。
There is a becket between PC card and snap joint
2. Take out power /B
3.Separate Power/B(1310A3075201)and power button( 6051B1314201)
When separate the button,take it gently to avoid damage the component on power/B
Disassemble Power Button & Power/B
20(1/1)
Power/B
PC Card
PC snap
joint
2019/8/20 1.00
SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step:
Attention︰ Pls inform the OP assistant immediately once there is any abnormal
Editor:
Publish: Zhu Ya IE
21(1/1)
1.Disassemble the LCM cable,Open up the gum(Picture 1)
2.Take hinge screw oiut (6052A0003501)* 6(Picture 2)。
Twisting force value :2.5 ± 0.1Kgf.cm,
Make sure the screw can’t loose, the screw can’t assemble on the Cable
Order 1 2 3456 78
Screwdriver #1 1
Take out Hinge screw*6
Picture 1
2 5 6
1 4
3
Picture 2
2019/8/20 1.00
Key station
SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step:
Attention︰ Pls inform the OP assistant immediately once there is any abnormal
Editor:
Publish: Zhu Ya IE
Disassemble LCM
22(1/1)
1. Open the LCM in 260~270°,and then take it on support fixture。
2 Assemble Hinge bracket screw(6052A0003501) fix it by screw both left and right
3 Twisting force value :2.5 ± 0.1Kgf.Cm
Make sure the screw can’t loose,can’t be dropped into the units
3.Along under cut direction,take out hinge up,recycle it into magazine
Pay attention when taking hinge up, don’t take it forcibly to avoid the TOP be out of
shape
Picture1
A cover and LCM combine fixture 1
Screwdriver #1 1
Picture 2 Picture 3
Picture 1
2019/8/20 1.00
SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step:
Attention︰ Pls inform the OP assistant immediately once there is any abnormal
Editor:
Publish: Zhu Ya IE
1.Along the WWAN Antenna ,disassemble the left and right cable in turn
Disassemble WWAN Antenna
23(1/2)
FOR WWAN model
2019/8/20 1.00
SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step:
Attention︰ Pls inform the OP assistant immediately once there is any abnormal
Editor:
Publish: Zhu Ya IE
Disassemble antenna holder
23(2/2)
For WWAN model
1 . Take out the Holder(6051B1315701) from the
corner,recycle it into magazine
Picture 2
Under Cut
2019/8/20 1.00
SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step:
Attention︰ Pls inform the OP assistant immediately once there is any abnormal
Editor:
Publish: Zhu Ya IE
1.Take out the right/left Speaker screw ( M2x3L 6052B0185401 ) *2。
Twisting force value :1.5 ± 0.1Kgf.cm
Make sure the screw can’t loose,can’t be dropped into the units
2.TOP take down the spk from Top,recycle it into magazine
Separate them by right and left
24(1/1)
Disassemble Speaker
Picture 1 LeftSpeaker
1
Screwdriver # 0 1
Right Speaker
1
6039B0099201 FG, L-speaker
6039B0099101 Luxshare, L-speaker
2019/8/20 1.00
SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step:
Attention︰ Pls inform the OP assistant immediately once there is any abnormal
Editor:
Publish: Zhu Ya IE
1.Take the finger screw out( M2x2L 6052B0156201 )
Twisting force value :1.5 ± 0.1Kgf.cm
Make sure the screw can’t loose,can’t be dropped into the units
2.Take out finger brkt( 6053B1668301)and finger module(6042B0553001),recycle it
When take out the FPS,please only hold the FPS module edge,don’t touch and press
the component on FPS
25(1/1)
Disassemble finger
Screwdriver #0 1
2019/8/20 1.00
SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step:
Attention︰ Pls inform the OP assistant immediately once there is any abnormal
Editor:
Publish: Zhu Ya IE
26(1/1)
Disassemble WWAN Antenna-Aux1
1. Disassemble WWAN Antenna Aux1(6036B0243701) and recycle it into its magazine
FOR WWAN model
2019/8/20 1.00
SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step:
Attention︰ Pls inform the OP assistant immediately once there is any abnormal
Editor:
Publish: Zhu Ya IE
1. Disassemble WWAN Antenna FFC,recycle into its
magazine
2. Take out the WWAN Antenna Main(6036B0243601)
from Top,recycle it into the magazine
27(1/1)
Disassemble WWAN Antenna-Main
FOR WWAN model
FFC
Cvilux 6035B0195501
Jiudong 6035B0198301
Picture 1
2019/8/20 1.00
SOP
Document No. : Empire FA Dis-assembly SOP Station :
Operation Des : Ver. : Date :
Fixture list Qty Fixture list Qty
Step:
Attention︰ Pls inform the OP assistant immediately once there is any abnormal
Editor:
Publish: Zhu Ya IE
1. Take Click pad BRKT screw out M2x2L (6052B0156201* 3 ) (Picture 1)。
Twisting force value :2+/-0.1kgf.cm
Make sure the screw can’t loose,can’t be dropped into the units
2.Take out the clickpad slantly(picture2)
3.Recycle the TOP and clickpad in each box
Disassemble Click pad
28(1/1)
Screwdriver #0 1
Picture 2
Clickpad Module
Sunrex 6034B0038701
2019/8/20 1.00
Picture 1
1 3 2
Key station