HOW TO APPLY 3D TILESTICKERS

CREATEYOUR WORLD

TIP!Ensure room temperature is 70°C 12 hours before & 34 hours aft er installati on so

the ti les adhere properly to the wall

Step 1

Tools for the job!

Tiles can be cut to size usingscissors or scalpel. Draw a line on the reverse of where to cut and use a straight edge ( e.g. metal rule )

Follow us

Step 2

Clean surface thoroughlyensuring all grease is removed.

Step 3

Draw a levelled line on the wallso ti les can be positi onedstraight.

Step 5

Peel away the backing paper, taking care not to touch the adhesive.

Step 6

Overlay the ti les where indicated to give a brick eff ect, press all the grout lines fi rmly.

Step 7

If going over existi ng ti les, spray the surface lightly with water to aid applicati on.

SUITABLE SURFACESSmooth fl at wallSmooth ceramic ti lesSmooth glass ti lesWall panel (Acrylic)Wall linoleumMirrorWallpaper

SURFACES TO AVOIDStucco wallStone wallUnfi nished wall (plaster)Unpainted plywood

Step 4

If going around sockets, measure where to cut around.

Step 11

The Finished Look!

Step 8

TIP!

TIP!Avoid contact with direct fl ame allow a minimum

distance of at least 12 inches.

Step 9

Use scissors to cut the shape required.

Step 10

Positi on onto the wall around the socket.