How Do You Choose A Bank Protection
Method? A delicate balance is
required, as demonstrated here by Roundman
Chosen method (or combination of methods) must meet the 3 E's:
• Economics
• Engineering
• Environmental
Determining the Best Method(Need To Rank and Assess Possible Choices)• Cost
• Level of protection• Degree of confidence in method• Identify other benefits in addition to bank stabilization (environmental,
aesthetics, accessibility).• Is upstream reach stable?• Effects of bank protection upstream and downstream of project. Will this
project blend with future bank protection projects?• Do you have the “Luxury of Space”?• Do you have the "Luxury Of Time"? Can you try a minimal approach that will
strengthen over time.• Practicality, constructability. Is specialized equipment needed? Is the
contractor familiar with the techniques?• List other design considerations (endangered species (both aquatic and
terrestrial), boating, fishing, swimming, and other recreational impacts, etc.)• Is the method experimental? If so, inform all parties !!
(From Charlie Elliott)
Goal and Function-Based Design will determine what you will use for your project
(WHAT IN THE WORLD ARE YOU TRYING TO ACCOMPLISH?)
What If The Bank Protection Fails?• What effects will failure have?• Perform risk analysis of failure modes for protection
techniques involved. Are protection techniques foundation dependent?
• What will be threatened if failure occurs?• What will effects of failure be upstream and
downstream?• What will it take to fix it? • How much money will be needed for repairs?• How much time will be needed to repair?• Can you get back to the project? Access?????
Each Streambank Erosion Problem Is Unique, And Will Therefore Require A Unique Solution!
• There are no "cookbook" solutions in river and stream stabilization!• There is a time and place for most every type of stabilization method.• Do as much for mankind & our planet as possible (multi-functional
design is preferred). Think early in project of other benefits and uses.
• Multi-disciplinary design team approach works best, learn from other professionals, bounce ideas around (brainstorm). Use common sense, look for nearby successful projects.
• Think in angles, look where water is going, see what is guiding and controlling water (bank angles, kickers).
• Thoroughly think proposed plan through. Work within your strengths, know your limitations! Get help when needed!!
• Identify maintenance needs, monitor project (even informally) • Learn from what you do. When touring a project ask the design
team what they would do differently.
Be careful with transitions-good one here, Hickahalla Cr. Senatobia, MS.
All transitions must be smooth, note gradual transition from low LPSTP to full bank paving protection
DEMONSTRATION PROJECTS
• From a research/demonstration project point of view there are typically two things to prove: that a given untried innovative bank stabilization method will in fact work on a specific river or stream and/or specific energy environment, and some of the demo project should fail to some degree so as to determine exactly what the minimum effective effort should be. In other words what is the lower limit? The project should be weaker/lower in the downstream direction.
• There should not be anything of value on the bank or in the near vicinity so when partial or total failure does occur valuable commodities (infrastructure, park facilities, natural resources) are not threatened.
What If You Have No Money? Or Too Much!(The Stream Is Falling Apart, What To Do?)
• Focus on a relatively short reach, or reaches, undergoing severe problems. Need to sell folks on the importance of the project. There is usually money available somewhere (landowners, demo money, Fed funds, etc.).
• Use expert assistance to analyze problems and recommend cost-effective solutions. This might be your only chance, at least part of the project has to be successful.
• Put something in the ground - call it a demo project, training exercise, etc. Get landowners or agency personnel to help (hands-on training workshops).
• If possible, use several variations of a few different methods. • If funds are really limited spend money at the toe. Use materials that can
adjust. Allow nature to strengthen project over time.• Monitor. Repair if needed. Publicize results.• Once you can show what works for your stream, then go about securing
funding to fix the remainder of the stream
The PowerPoint presentation previous to this slide was developed & built by
Dave Derrick. Any questions or comments, call my
personal cell @ 601-218-7717, or email @ [email protected]
Enjoy the information!!
NO INNOCENT BYSTANDERS!!
ALL RESTORATION DESIGNS SHOULD BE CLOSE PARTNERING
EFFORTS!!!
Let’s look at a different way to analyze things
Greenbank – Selection Software
John McCullah,
main author of E-Senss
Greenbank – Selection Software
Select importance of possible impacts.
Select problem and extent of the problem.
Select erosion processes.
Click blue text for more information.
Select channel characteristics.
Click for more information.
Select flow regime
characteristics.
Select potential hazards and consequences of
failure.
Click for more information about costs.
Click for more information about costs.
Enter a number between 0.5 and 20.
Enter bank slope in degrees.
Enter local velocity in m/s.
Recommended Technique.
Click for more information.
Links to related techniques.
Links to special topics.
Links to extensive photo
collection.
Links to typical drawings.
Links to complete case study
descriptions.
Links to PDF files for complete
documentation.
Select additional information.
Possible combination techniques.
Alternate technique.
Not recommended
.