Download - Hospitality Products 2012ebusiness.onity.com/.../cms/HT+LOCKS+Product+Catalog_1.pdfHospitality Products 2012 Table of Contents ADVANCE Lock ADVANCE RFID Lock HT RFID Lock - NEW HT24

Reliable SupportReal Solutions

Hospitality Products 2012

1-866-86-Onity 1-866-86-Onitywww.Onity.com www.Onity.com

© O

nity

201

0. A

ll rig

hts

rese

rved

. Da

ta s

ubje

ct to

cha

nge

with

out n

otic

e.

Hospitality Products 2012Table of Contents

ADVANCE Lock

ADVANCE RFID Lock

HT RFID Lock - *NEW*

HT24 Lock

HT28 Lock

OnPoint Encoder -*NEW*

Manual Insertion Encoder

Dual Technology HT22m Motorized Encoder

ADVANCE RFID Encoder

Onity HT22 System

Onity HT24w System

Onity HT28 Smart System

Revalidator

Portable Programmer

Extended Portable Programmer

Portable Printer

Rim Panic Interface

Mag-Stripe Card Reader

RFID Card Reader

Dual Smart / Mag-Strip Card Reader

Lockcases and Latches

Levers and Finishes

Strikes, Plates and Finishes

HT Mortise Lock Internal Components

HT Mortise Lock External Components

ADVANCE Lock Components

ADVANCE RFID Lock Components

OS200 Digital Keypad Safe with Audit Trail

OS400 Digital Keypad Safe with Printable Audit Trail

OS600 Digital Keypad / Keycard Safe

Intelligent Technology

SensorStat DDC 2-F

SensorStat Wireless DDC

SensorStat DDC Savings Opportunities

innPULSE

Electronic Locking Solutions

Electronic In-Room Safes

Energy Management Solutions

4-5

6-8

9

10-11

12-13

14

15

16

17

18

19

20-21

22-24

25

26

27

28-29

30

31

32

33

34

35-36

37

38

39

40

42

43

44-45

47-48

49-50

51

52-53

54-55


Electronic Locking Solutions


ADVANCE is a revolutionary locking solution that isdestined to change the way you look at hotelsecurity, design and technology.

ADVANCE combines the proven reliability of theworld’s most trusted name in electronic lockingwith a fresh new aesthetic that is designed to meetthe needs of the demanding hospitalityenvironment.

ADVANCE features a unique two-piece modulardesign and an array of attractive options that allowyou to seamlessly blend your guest room doorlocks into any hotel décor. One look at ADVANCEand you’ll never look at door locks the same wayagain.

Mag-Stripe Lock FeaturesNon-volatile memory records the last 500 lockopenings—including date, time and card used

Programmable for length of time door remains open,and automatic closing.

Low battery indicator lights alert hotel staff withoutdisturbing guest.

Programmable for the “office-mode” function (freepassage).

Corrosion-resistant case for normal atmosphericconditions.

Lock ensures accuracy by reading the card twice; onceduring insertion and once during removal.

Each new guest card overrides any previous guestcard, preventing re-entry.

Smart-card Lock FeaturesDual technology reads smart-chip cards and Mag-StripeCards

Non-volatile memory records the last 500 lockopenings—including date, time and card used

Programmable for length of time door remains open,and automatic closing.

Low battery indicator lights alert hotel staff withoutdisturbing guest.

Programmable for the “office-mode” function (freepassage).

Corrosion-resistant case for normal atmosphericconditions.

Lock ensures accuracy by reading the card twice; onceduring insertion and once during removal.

Each new guest card overrides any previous guestcard, preventing re-entry.


Operation Systems:ADVANCE can be powered with any of the following.HT22i

For Mag-stripe keycards.

• Ideal for small and mid-sized properties.

• All the features and functions you expectfrom an electronic locking systemwithout the need for a PC.

• PMS interface option.

HT24w

For Mag-stripe keycards.Expect more!

• Fully featured PC-based system for anyproperty size.

• Virtually unlimited number of frontdeskcard issuing stations.

• Optional PMS and POS interfaces.

HT28 Smart & RevalidatorDual Technology Locks accept both Mag-stripe and Smart. All the benefits of HT24w plus virtually “on-line” performance.

• Enhances overall security and improves staff andoperations management.

• Smart keycards can be used for staff only while guestsuse inexpensive mag-stripe.

• Smart keycards enable multiapplication.

Cover Plates:Onity offers a selection of attractive cover plates thatare ideal for retrofit projects. Customized cover platedesigns can also be developed upon request.

Finishes:Complement the elegance of your HT ADVANCElock with any of these wear-resistant finishes.

Note: Not all and options are available in every region. Please consult your Onity sales representative for details.

SatinChrome(626)

SatinBrass(606)

AntiqueBrass(609)

PolishedBrass(605)

Toledo

Granada

Wing

Handles:Choose the perfect handle to reflect the design style of your property.

Standard

EURO with Auto Latch• Meets European standards

prEN12209 (Grade 2) and UNE97-320-88 (grade B. Maximum)

ANSI• UL approved• ANSI/BHMA A156.25 Certified

ANSI with Auto Deadbolt• UL approved

Latch Mechanisms:Onity offers a wide range of latch mechanismsto suit the needs of any property.

DIN with Auto Deadbolt• Made to DIN 18250

Class 3 Fire Approved

One small step in technology is a giant leap for security. Introducing ADVANCE RFID by Onity™,

a revolutionary locking solution that can help you achieve new heights of convenience and

operational efficiency for your facility. This newest generation of ADVANCE combines the

proven reliability of the world’s most trusted name in electronic locking with a fresh new

aesthetic designed to meet the needs of the most demanding environments. ADVANCE RFID

features a unique two-piece modular design that allows you to seamlessly blend your door

locks into any décor. So make the leap to ADVANCE RFID—it’s light years ahead of the rest.

Advance your locking technology to a new dimension.

ADVANCE™ RFID Technology

ADVANCE RFID is Onity’s newest locking system innovation, providing

added convenience as well as enhanced security for facilities of all

types. Based on the success of Onity’s modular ADVANCE locking

solution, ADVANCE RFID (Radio Frequency Identification) combines the

extensive benefits of the design-centric ADVANCE lock with

industry-standard contact-less RFID technology.

Since no physical contact between the card and the reader is

required, ADVANCE RFID eliminates the need for users to swipe

keycards, making authorized access quicker and more convenient.

In addition to traditional keycards, ADVANCE RFID is compatible with

other form factors, including wristbands, lanyards, and even Near

Field Communication (NFC) compatible cellular devices running in

MiFare® emulation mode.

ADVANCE RFID utilizes the MiFare® Classic technology, which has

become a standard worldwide. The system may be used with 1k, 4k

and Ultralight tokens, and is ISO14443A and ISO14443B (part 4)

compliant. Onity writes to sector 1 of 1K and 4K MiFare® cards, so the

same card can be used for multiple facility technology applications.

ADVANCE RFID is also compatible with MiFare® Ultralight cards.

Security

Engineered for optimum security, ADVANCE RFID can be used with

confidence by property management, security personnel and users

alike. The system employs multiple levels of encryption in order to

maximize both security and peace of mind.

All Onity ADVANCE RFID cards are encrypted with the NXP

Crypto-1 encoding algorithm, used in more than 1 billion

smartcards throughout the world.

For even more advanced security, Onity has taken the additional step

of further encrypting the information which is encoded on the

MiFare® token and which is passed between the token and the

ADVANCE RFID lock. This encryption is unique to Onity, and provides

an extra level of protection by ensuring that newly-encoded cards will

cancel out existing cards, rendering them invalid.

Benefits of ADVANCE RFID

Upgrading to ADVANCE RFID

Specification for Upgrading from Magnetic Stripe to ADVANCE RFID

For current ADVANCE magstripe lock customers, upgrading to ADVANCE RFID is quick and easy. The two-piece, modular design means

that installation is as simple as replacing the existing magnetic stripe reader with the ADVANCE RFID reader. The entire installation takes

less than 5 minutes per door.

Onity also offers a selection of attractive cover plates for retrofit projects and those upgrading from traditional locks. These cover plates

are designed to coordinate with any décor, while eliminating the need for additional cut-outs in the door.

Security Features:NXP Crypto-1 Encoding of Cards

- Onity Proprietary Encoding of Data

- Proprietary “Look Ahead” Technology

- New Card Cancels Existing Card

Technology Features: Standards-Based MiFare® Technology

- 14443A, 14443B (part 4)

Multiple Form Factors Available for Tokens

Easy Upgradeability (Upgrade Kit Available)

- Less than 5 Minutes per Door

- Migration from ADVANCE Mag requires only

reader replacement and central office upgrade

Standards-Based

Supports multi-use capabilities

Leverages ADVANCE lock hardware

Easy upgrade(Less than 5 minutes per door)

Certifications and Standards:FCC & CE certified

UL10C certified for 3 hours

European Fire Certification (EN1634-1)

UPGRADEABILITY

Magnetic

MIFARE®/ NFCTechnology

Dual TechnologyMAG Contact Chip

© O

nity

201

2. A

ll rig

hts

rese

rved

. D

ata

subj

ect t

o ch

ange

with

out n

otic

e.M

IFAR

E is

a r

egis

tere

d ®

trad

emar

k of

Phi

llips

Sem

icon

duct

ors

Gm

bH.

Dress Plates:Onity offers a selection of attractive dress plates thatare ideal for retrofit projects. Customized designscan also be developed upon request.

Latch Mechanisms:Onity offers a wide range of latch mechanismsto suit the needs of any facility.

EURO with Auto LatchMeets European

standards prEN12209(Grade 2) and UNE97-320-88 (grade B.Maximum)

ANSIUL approved

ANSI withAuto Deadbolt

UL approved

Cylindrical – BLA

Finishes:Complement the elegance of your ADVANCE RFID lock with any of these wear-resistant finishes.*

Handles:Choose the perfect handle to reflect the architectural design or décor of your property.*

*More options are available. Please consult your Onity representative for details.

Wing

Toledo

Satin Chrome (626) Satin Brass (606)

Antique Brass (609) Polished Brass (605)

Granada

1-866-86-Onitywww.Onity.com

HT RFID

© O

nity

201

2 A

ll rig

hts

rese

rved

. Da

ta s

ubje

ct to

cha

nge

with

out n

otic

e.

Features

� Stand alone installation (no wires required)

� Reading technology: contactless RFID (ISO 14443A,14443B, part 4, NFC)

� Powered by 4 standard AA batteries

� Average battery life: 2 years approximately

� Unlimited masterkeying potential

� Multiple opening devices available: cards,wristbands, keychains, etc.

� Non-volatile memory: records last 500 openingsincluding date, time and card user

� Deadbolt operates by a thumb-turn inside the roomfor added guest privacy and security (“Do-Not-Disturb” Function)

� Programmable to customer needs (“Office mode”,free passage, etc.)

� LEDs to indicate lock status including a low batterywarning

� MiFare® compatibility

Upgrading to HT RFIDThe upgrade from HT to HT RFID is a simple plug and play, requiring only anew reader and front escutcheon.

Automatic relock after entryIt protects your guests while protecting your property.

CompatibilityOnity HT contactless locks are compatible with Onity HT22 and HT24electronic locking systems.

Easy combination of contactless locks with other Onity locksOnity HT contactless locks can be combined with other Onity magnetic ordual technology locks in the same installation, managed by the samesystem. This allows for a great deal of flexibility.

Ready to upgrade your existing HT locks?Existing HT lock customers can now upgrade to the HTRFID locking system. RFID (Radio Frequency Identification)provides added security to the reliable HT lock you havecome to rely upon.

RFID technology requires no physical contact between thecard and the reader. This eliminates the need for users toswipe the keycard, allowing convenience and quickaccess.

RFIDRFID (ISO 14443 A) is rapidly becoming the globalstandard for contactless cards. RFID cards improve cardreliability, security and improve the guest experience.


HT24 Electronic Lock

FeaturesCompatible with Onity HT24 and HT22electronic locking systems.

Off-line installation (no wires required)

Fits all types of doors

Audit trail memory: records last 500 openings

Non volatile memory (program)

Programmable for length of time door remainsopen and automatic closing.

Flexible masterkeying

Lock ensures accuracy by reading the cardtwice -- once during insertion and once duringremoval

Uses standard ISO/ABA mag-stripe cards andAA batteries

Office mode (free access)

Green and red LED´s to indicate lock status

Indication of low batteries

Deadbolt operates by a thumbturn inside theroom for added guest privacy and security("Do-Not-Disturb" Function)

Corrosion-treated for normal atmosphericconditions

Special versions for outdoors

Concealed screw design

Includes a low consumption clock/calendar tocontrol card shifts

SpecificationsSize:11.2” / 2.8” / 1.9”

285mm / 72mm / 50mm

TemperatureStandard alkaline batteries:0º C/65º C (32º F/149º F)Optional lithium batteries:-40º C/75º C (-40º F/167º F)

Humidity: up to 95% without condensation

Power supply: 4 alkaline 1.5- volt AA batteries

Power consumption in stand-by: 15 mA



How to Compute Your Part Number:

KHD - _ _ _ - _ _ _ - _

Example:

KHD - S M - 6 2 6 - R

HT24 Lock with a Shallow Mortise, Satin Chrome Finish, Right Hand

A = Autobolt

AN = Autobolt Narrow

C = Cylindrical

L = Latch Only Mortise

M = Standard Mortise

MN = Narrow Mortise

SM = Shallow Mortise

605 =Polished Brass

606 =Satin Brass

609 =Antique Brass

619 =Satin Nickel

625 =Polished Chrome

626 =Satin Chrome

695 =Dark Bronze Powdercoat

L =Left Hand

R =Right Hand



FeaturesCompatible with HT28 Smart electronic lockingsystems

Stand alone installation (no wires required)

Fits all types of doors

Flexible masterkeying

Programmable for length of time door remainsopen and automatic closing.

Deadbolt operates by a thumbturn inside theroom for added guest privacy and security("Do-Not-Disturb" Function)

Non-volatile memory: records last 500openings including date, time and card user

Multi-technology reader using either ISO/ABAmag-stripe card, memory-chip card,microprocessor smart card and anycombination of the three.

Powered by 4 standard AA batteries

Programmable to customers needs ("Office mode" free passage, etc.)

The LEDs light to give lock status including alow battery warning.

Lock ensures accuracy by reading the cardtwice -- once during insertion and once duringremoval

Auto Dead Bolt mechanism (optional)

Corrosion treated for normal atmosphericconditions

Size:11.2” / 2.8” / 1.9”285mm / 72mm / 50mm

Temperature:Standard alkaline batteries:0º C/65º C (32º F/149º F)Optional lithium batteries:-40º C/75º C (-40º F/167º F)

Humidity: up to 95% without condensation

Power consumption in stand-by: 5 - 7mA

Full InteroperabilitySmart Card Lock supports a wide range of smart cardssimultaneously

Multi-Technology ReaderOnity Smart Card Lock can read both magnetic, smart memory andsmart microprocessor cards simultaneously

Enhance Your Property´s ImageCustomize your locks by adding your logo or a design

Automatic Reset After EntryProtects your guests while protecting your property from liability

Smart Card Featuresa) Audit Trails• The lock records the last 500 entries to protect you from liability• The smart card can also be audited for employee tracking

b) Low Battery Report• The staff smart card audit trail also provides you with locks lowbattery indication

Auto Deadbolt ( Optional )Whether your guest is in or out of the room, you will always receivethe added protection of a deadbolt



How to Compute Your Part Number:

KHD - _ _ _ - _ _ _ - _

A = Autobolt

AN = Autobolt Narrow

C = Cylindrical

L = Latch Only Mortise

M = Standard Mortise

MN = Narrow Mortise

SM = Shallow Mortise

605 = Polished Brass

606 = Satin Brass

609 = Antique Brass

619 = Satin Nickel

625 = Polished Chrome

626 = Satin Chrome

695 = Dark Bronze Powdercoat

L = Left Hand

R = Right Hand

_ = HT24

Y = HT28

Example:

KHD - Y S M - 6 2 6 - R

HT28 Lock with a Shallow Mortise, Satin Chrome Finish, Right Hand


© O

nity

201

1 A

ll rig

hts

rese

rved

. Da

ta s

ubje

ct to

cha

nge

with

out n

otic

e.

Features� Innovative touch-screen with Quick Action buttons

� TCP / IP connectivity

� Optional WiFi connectivity

� ”Hot swap” modular encoding deck

� Insertion encoder deck (LoCo)

� Motorized deck for encoding on tracks 1 and 2,Smart Card, HiCo

� RFID deck for ISO1446A

� Web-based technical support

� USB or SD card memory backup

� USB printer support (standard PCL 5/6)

� PMS interface

� Compatible with existing Onity locks

� Supports up to 500 locks per property

Flexibility....ReliabilityThe OnPoint encoder is Onity’s newest hospitality productproviding a number of new features for the front desk staff.

The color touch-screen interface with Quick Action buttonsmake the encoder simple to use. The encoder offers “hotswap” encoder decks making it easy and affordable for hotelsto upgrade card technologies without replacing the entire frontdesk system.

CompatibilityOnPoint can be directly connected with PMS (propertymanagement systems) and is backwards compatible withexisting Onity locking solutions.

Maintain DataOnPoint offers a 4 1/2 hour battery life (or 250 activations)connecting up to 8 encoders all networked and synchronizedback to the parent encoder. If there is a power failure or theparent goes offline, any of the 8 encoders can be designatedto take over to eliminate downtime.

Improve Customer ServiceThe check-in and check-out experience can be managed muchmore quickly and efficiently with OnPoint’s features andcapabilities, providing a better initial impression for yourguests.

Available May 2012

The OnPoint encoder includes a color touchscreen.

Removable encoding deck to swap between insertion

and motorized decks.


Manual Insertion Encoder

FeaturesInterfaces with any PMS system

Internal modem available for immediate andremote software upgrade and locking planmodifications

Low cost

Easy to use

Reads/writes cards on track #3

Battery back-up

Keeps in non volatile memory all the hotelcards codes (as PC backup)

Works with standard magnetic stripe cardsCommunication through screen (8 x 20characters message display)

Standard parallel printer

Self-contained compact encoding/controlstation with new insertion technology (savesspace at reception)

Connects to a PC running HT24w or HT28

Incorporates the “uninterrupted key supply”function, which maintains the terminal inoperation, should the hotel PMS fail

Possibility to work in up to 10 differentlanguages: English; Spanish; French standardand able to be adapted to other languages ifrequired.

Incorporates 7 hot keys for the mostfrequently-used functions

Low coercitivity magnetic stripe cards

Records the last 5,000 events

SpecificationsWeight: 880 gr.

Dimensions: 13.7” / 9.2” / 5.3”350mm / 235mm / 135mm

Power supply: 12 V DC

Part NumbersManual Insertion EncloderPH 100 240

Power CableVZ 400 340


Dual Technology HT22mMotorized Encoder

FeaturesWorks with standard high & low coercivitymagnetic stripe and smart chip cards

3 track encoder that reads/writes ISOinformation on track 1 or 2 with Onity data on track #3 (when used with PC-based system)

Reads/writes onto memory chip andmicroprocessor Smart cards (contact Onity formore info about current compatible cards)

Up to 10 different languages (now English,Spanish, French are standard and othersavailable upon request)

Communication through screen (8 x 22character LCD message display)

Easy to use

Small compact design

The three-track capability for mag-stripe cardsand multi-application capabilities through Smartcards allow integration with point of sale (POS)terminals, vending machines, etc.

SpecificationsDimensions:10.125” L / 6.5” W / 3.625” H257mm L / 165mm W / 92mm H

Weight: 3.0 lb / 1.36kg

Voltage: 15 VDC

Operating Current: 1200 mA

Card-Coercivity: 300 Oersteds (low)2750 - 4000 Oersteds (high)

Part NumberPH 100 400


RFID Encoder

© O

nity

201

2. A

ll rig

hts

rese

rved

. Da

ta s

ubje

ct to

cha

nge

with

out n

otic

e.

� Works with MiFare® RFID cards

� Communication through screen (8 x 22 characterLCD message display)

� Small compact design

� Multi-application capabilities through RFID cardsallows integration with Point of Sale (POS)terminals, vending machines, etc.

Features

Specifications

Part Number

� Compatible with Ultralight 1k, 4k cards

� Dimensions:

10.125” L / 6.5” W / 3.625” H

257mm L / 165mm W / 92mm H

� Weight: 3.0 lb / 1.36kg

� Voltage: 15 VDC - 12 Volt

� Operating Current: 1200 mA

� HT22P

� Interfaces with any PMS system

� Multiple language support

� Easy to use

� Small compact design

� Battery back-up

Benefits


Designed for small to medium-size properties of up to 500 rooms,the Onity HT22 offers a full array of features, includingdirect PMSinterface, without requiring a PC. That means it will take up lessspace at your front desk, while still giving you thefeatures you need.

The Onity HT22 provides a smooth and efficient check-in, giving yourguest’s stay a great start. Fully-featured and easy to use, the HT22is a powerful management system within a compact encoding unit.With the unique Insertion Technology encoding offered by the Onitymanual insertion encoder, errors caused by improper encoding arereduced to virtually zero. The HT22 system operates with the OnityHT24 magnetic stripe electronic lock. And Onity operates 24 hoursa day, 365 days a year to ensure you’ll get the support you need,when you need it. All Onity products are backed by Onity’s warrantyand our commitment to provide the highest standards of service forour customers.

off-line/on-line

Onity HT22

FeaturesSuperior user interface includes an easy-toread widescreen display

Up to 8 check-in stations can be linked in amulti-front-desk configuration with up to 100 operators

Internal modem for remote update of thesoftware or the locking plan and remotereporting capabilities

Up to 100 different types of master keysassigned to 250 users by name

Provides staff time control

Works with both off-line and on-line devices

Upgradeable to more advanced Onity systems

Compatible with Onity Safes and Onity EnergyManagement Systems

Onity Magnetic Stripe Electronic LockFeatures


Programmable for length of time door remainsopen, and automatic closing.

Low battery indicator lights alert hotel staffwithout disturbing guest.

Programmable for the “office-mode” function(free passage).

Corrosion-resistant case for normalatmospheric conditions.

Lock ensures accuracy by reading the cardtwice; once during insertion and once duringremoval.

Each new guest card overrides any previousguest card, preventing re-entry.


Whether you have a dozen rooms or 6,000, the Onity HT24wElectronic Locking System can take you where you need to be.

The Onity HT24w is brilliantly designed, yet ingeniously simple touse. Your staff can perform at optimum efficiency, and your guestswill appreciate your making their personal comfort and security a toppriority.

The Onity HT24w system offers the features you need, with theadded advantage of Onity world-renowned reputation for customersupport.

The Onity HT24w system operates with the Onity magnetic stripeelectronic lock. Onity ’s technical department is open for you, 24hours a day, 365 days a year, to ensure you’ll get the support youneed, when you need it. All Onity products are backed by Onity’swarranty and our commitment to provide the highest standards ofservice for our customers.

Onity HT24w

FeaturesManages up to 6,000 rooms

PC-based system

Windows® 2000/XP/2003 compatible

User friendly: easy to learn, easy to use

Direct interface with any PMS or POS system

Allows Multi-Front-Desk configuration: links asmany check-in terminals as needed withoutrequiring additional PCs

Up to 5,000 master cards identified by username

Provides staff time control

Capability to control full range of Onity options:room safes; energy-saving devices; on-line andoff-line card readers; card identifiers


Onity Magnetic Stripe Electronic Lock Features


Programmable for length of time door remainsopen, and automatic closing.

Low battery indicator lights alert hotel staffwithout disturbing guest.

Programmable for the “office-mode” function(free passage).

Corrosion-resistant case for normalatmospheric conditions.

Lock ensures accuracy by reading the cardtwice; once during insertion and once duringremoval.

Each new guest card overrides any previousguest card, preventing re-entry.

off-line/on-line


Onity HT28 Smart

FeaturesManages up to 6,000 rooms

Manages up to 5,000 different masters

Master cancellation per individual user (not peruser group) when using the Revalidator

Enhanced suite management

Up to 100 networked encoding stations

Compatible with remote encoding and kiosk

Windows® 2000/XP/2003 compatible

PMS & POS Interface

TCP/IP Enhanced Interface

Staff Time Control

–Up to 200 time tables

–8 shifts; 3 day types

Lock audit of the last 500 transactions


Onity HT28 Smart. 90% of the power and efficiency of an on-linesystem at 1/5th the cost.

The Onity HT28 Smart system, in conjuction with the Revalidator,improves the security, productivity and management of yourproperty through the use of smart card techology.

Dual Technology. The Onity HT28 Smart contains a multitechnologyreader with full interoperability.

This allows you a combination of magnetic stripe and smart cards atthe same time.

off-line/on-line


Onity HT28 Smart

The Revalidator brings a new array of features that enhance the Onity HT28 Smart electronic locking system:

Improve Master Key Management

Master Key Cancellation (without walking to a single lock)

Master Key Distribution

Master Key Changes

Improve Overall Security

Authorized Employee Database Checks

Individual Staff Activity Reports

Master Key Ownership Control (PIN Code)

Master Key expiration with customizable revalidation increments in relation to the sensitivity of the card

Optimize Human Resources Management

Staff Card Distribution

Housekeeper Dispatch

Task Assignments

Master Key Lock-Out

Individual Employee Mailbox for Messages

How the Revalidator Works:

up to 100 endoding stations

Sample HT28 Smart Front Desk System Configuration on Onity HT COM Network:


Revalidator

The Revalidator brings a new array offeatures that enhance the Onity HT28Smart electronic locking system.

Improve Master Key Management

Master Key Cancellation (without walking to asingle lock)

Master Key Distribution

Master Key Changes

Improve Overall SecurityAuthorized Employee Database Checks

Individual Staff Activity Reports

Master Key Ownership Control (PIN Code)

Master Key expiration with customizablerevalidation increments in relation to thesensitivity of the card

Optimize Human Resources ManagementStaff Card Distribution

Housekeeper Dispatch

Task Assignments

Master Key Lock-Out

Individual Employee Mailbox for Messages

Part NumberPD 700 170

With HT28 Smart, Onity defines the new standard for state-of-the-artelectronic locking systems by combining microprocessor SMARTCards, Memory Chip Cards, and Magnetic Stripe Technology in onesystem.

Unlike other Smart Card electronic lock providers, Onity has takenthe solution one step further with an innovative concept calledRevalidator.

SpecificationsHeight: 13.0” 33cmWidth: 9.0” 23cmDepth: 6.5” 16.5cmWeight: 13.6 lbs 6.2 kg

Equipment performs optimally in operatingtemperatures between 41 to 95 F (5 to 35 C) andhumidity ranges between 20% and 80%.

Power: 12-15 VDC (1-6 Amps)Display: 7x20 character LCD

Optional AL300ULT Power SupplyInput Voltage: 115VAC, 1.0 Amp or 230VAC 0.9Amp@ 50/60 HzOutput Voltage: 12VDC or 24VDC (field selectable)RegulatedOutput Current: 2.5 Amps @ rated voltageSecondary Protection: Overload protected byregulator circuit Charging Current: 1.25 amps MaxDimensions: 12"H x 12"W x 4"DMaterial: SteelCertifications/Compliance: Meets UL 1481, 294,Suited for UL Certified Fire Alarms and AccessControl Systems.

ComplianceUS:This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:1. This device may not cause harmful interference.2. This device must accept any interference received,including interference that may cause undesiredoperation.


Revalidator

How the Revalidator Works:

The Revalidator provides a simple way to distribute important information about assignments, schedules, special events,shift changes or special messages.

OperationThanks to the write back feature of the HT28 Smart locks, each use of the staff card is also registered into the Smartcard chip. During the routine of revalidation, stored information is uploaded from the card to the system databaseallowing hotel management to access information and create customized reports at anytime, such as:

Individual Staff Tracking Report (Who, Where, When)

Engineering Reports

–Low Battery Report

–Lock Status Report

Special Assignment Reports (i.e. Mini-Bar Checks, Contract Employee Checks, etc.)

Individual Productivity Analysis


Revalidator

Other Floors*

2nd Floor

1st Floor

Recommended Revalidators: at least 1 on Housekeeping and 1 for Back-of-House.*Optional: Floor-Unit quantity is dependent on property size, system application and revalidation frequency.

Revalidator Reduces Wiring by 99%:

up to 100 encoding stations

Sample HT28 Smart Front Desk System Configuration on Onity HT COM Network:

Housekeeping Back-of-House


Portable Programmer

FeaturesCompatible with Onity HT22, HT24 and HT28Smart electronic locking systems.

Data transfer between the Onity system andoff-line devices: wall readers and safes

Hand held, portable and easy to use

Programs the off-line devices

Updates the codes and timetables for the off-line devices

Downloads audit trail from Onity electroniclocks

Tests the functions of the lock

May be used to open locks in emergencycases

Allows uninterrupted front desk operation at alltimes

Membrane keypad and 2 x 16 charactersdisplay

Buzzer for communication steps and errors

SpecificationsWeight: 220 gr.

Size:7.0” / 4.0” / 1.8”180mm / 100mm / 45 mm

Material: black ABS

4 standard batteries (1.5 V, alkaline, AA, LR6)

Part NumbersPortable ProgrammerPH 100 200

Portable Programmer to Lock CableVC 400 160

Portable Programmer to Encoder CableVC 400 640

The Communication LinkThe Onity Portable Programmer is the clever link between your frontdesk and all of your secured access points. Easy to use andlightweight, this handheld unit allows your front desk staff to performcommunication functions without interrupting check-in procedures.

The Onity Portable Programmer is used by your staff to test orprogram your locks, and to retrieve the audit trail of Onity electroniclocks, cards readers and electronic in-room safes.

The Portable Programmer is the only tool you need to run acomplete diagnosis of the functioning of any Onity lock, or to openthe lock in case of emergency.

The direct connection port to the lock provides hassle-freecommunication. Compatible with both Onity HT28 Smart, HT24wand HT22 electronic locking systems.


Extended PortableProgrammer (XPP)

FeaturesCompatible with Onity HT24, HT28 electroniclocking systems and OS electronic safes.

Transfers data between the PC and the locksand/or other off-line devices

Programs the locks and other off-line devices

Downloads audit trail from locks into PC

Displays lock audit trail on screen

Lock audit trail printable using optionalportable printer

Checks technical functions of the lock -diagnosis

Opens locks in emergency cases (batteryfailure)

Password Protected: Operator log-in required

Stores system user names

Adjustable security by Operator

User friendly, heavy-duty ADA compatiblemembrane keypad

Alphanumeric keypad with soft key menus

Large (LCD) display 8 x 22 characters

Upgradeable

Messages in different languages (optional)

Low power detection

Fast charge of batteries, within 1 hour

Auto shut-off (configurable time)

RequirementsVersion 3.1 or higher HT24 or HT28 software

Dedicated serial port on the computer system

Works with existing HT24 or HT28 locks

SpecificationsCase material:ivory ABS

Dimensions:8.0” L / 4.25” W / 1.563” H,203mm L / 108mm W / 40mm H

Weight:1.1 lb / 0.5 kg

Voltage:6 VDC supplied by 4 standard AA NiCad (rechargeable) batteries or 12 VDC adapter

Charging current:1000 mA

Memory Capacity:4.5M RAM available for storage of lock and audit data

Part NumberPH 100 210


Portable Printer

FeaturesCompatible with Onity HT24, HT28 electroniclocking systems and OS electronic safes.

Direct thermal printing system

Serial interface

LED color for Power and Charge

Auto shut-off

SpecificationsBattery type: Li-ion battery pack

Battery charging time: Approximately 3 hoursby main unit + AC adapter

Recommended paper: TF50-KS-E2D(Nippon paper)

AC Adapter:10AD-JU (for Japan, USA, and Canada)10AD-E (for Europe)Input voltage: 90 V - 264 V ACOutput voltage: 9.0 V DC 1.0 A

Operating Environment:Temperature: 5 - 400Humidity: 35 - 80% RH (No dew condensation)

CharacteristicsDimensions:4.5” width / 3.5” depth / 2.25” height116mm width / 90mm depth / 51mm heightPaper cover width: 57mm / 2.24”

Weight:Approx. 370 gr / 0.81 lb(With battery and belt clip, without paper)

Part NumberCP 300 690


Rim Panic Interface

� Cost effective access solution

� Off-line installation, no wires required

� Non-volatile memory and audit trail

� Suitable for outdoors and extreme weatherconditions with weather kit

� Fits all types of doors with a 5” stile or larger,new construction and retrofit

© O

nity

201

2. A

ll rig

hts

rese

rved

. Da

ta s

ubje

ct to

cha

nge

with

out n

otic

e.

Features

� Electronic lock

� Panic Bar

� Mounting Plate

� Face Plate

� Mounting Screws

Components

� Designed to ANSI Grade 1 specifications

� ADA compliant

� Free moving clutch mechanism

� Temperature tolerance range: alkaline batteries, -0o F/130o F (-18o C/55o C); lithium batteries*-40o F/167o F (-40o C/75o C)

*non-fire rated doors only

� Humidity tolerance: up to 95% withoutcondensation

� Power supply: 4 standard alkaline 1.5 voltbatteries

Specifications

� K2 Commercial Hardware Series QED100

� Von Duprin® 98/99 Series Rim PanicInterface

Options

� K2 Series QED100 Rim Panic Interface Kit

KHA RIM 605 - Polished Brass

KHA RIM 606 - Satin Brass

KHA RIM 626 - Satin Chrome

� Von Duprin® 98/99 Series Rim PanicInterface Kit

KHA RPI1 605 - Polished Brass

KHA RPI1 606 - Satin Brass

KHA RPI1 626 - Satin Chrome

Part Numbers


HT RFIDRim Panic Interface

� Cost effective access solution

� Off-line installation, no wires required

� Non-volatile memory and audit trail

� Suitable for outdoors and extreme weatherconditions with weather kit

� Fits all types of doors with a 5” stile or larger,new construction and retrofit

� MiFare® compatibility (ISO 14443A, 14443B,part 4, NFC)

© O

nity

201

2. A

ll rig

hts

rese

rved

. Da

ta s

ubje

ct to

cha

nge

with

out n

otic

e.

Features

� Electronic lock

� Panic Bar

� Mounting Plate

� Face Plate

� Mounting Screws

Components

� Designed to ANSI Grade 1 specifications

� ADA compliant

� Free moving clutch mechanism

� Temperature tolerance range: alkaline batteries,0o F/130o F (-18o C/55o C); lithium batteries,-40o F/167o F (-40o C/75o C)

*non-fire rated doors only

� Humidity tolerance: up to 95% withoutcondensation

� Power supply: 4 standard alkaline 1.5 voltbatteries

Specifications

� K2 Commercial Hardware Series QED100

� Von Duprin® 98/99 Series Rim PanicInterface

Options

� K2 Series QED100 Rim Panic Interface Kit

KHA RIM 605 - Polished Brass

KHA RIM 606 - Satin Brass

KHA RIM 626 - Satin Chrome

� Von Duprin® 98/99 Series Rim PanicInterface Kit

KHA RPI1 605 - Polished Brass

KHA RPI1 606 - Satin Brass

KHA RPI1 626 - Satin Chrome

Part Numbers


Secure your property with card readers at perimeter doors,elevators, parking areas, pools, health facilities, etc.

The on-line card readers allow reception personnel to checkopenings as well as authorize or deny card access in real time. Non-volatile memory supports an audit trail of the last 8 000 openings,and an anti-passback function is also incorporated.

The off-line card readers allow only authorized card holders to gainaccess, and the audit trail retains the last 500 openings.

Card Readers are programmable, just like any Onity lock. Perfectfor interior or exterior use, readers can be equipped optionally witha heater for temperatures below 0 ºC (32º F).

There are also special versions for elevators which can optionallyincorporate an area control board that allows filtering the access toeight different areas from one single reader.

off-line/on-line

On-line connection

Off-line connection

Mag-StripeCard Reader

FeaturesCompatible with Onity HT24 and HT22electronic locking systems.

Allows both on-line and off-line configurations

Reads magnetic cards and sends theinformation to the wall reader control unit(on- or off-line)

Red and green LED´s to indicate status

A 12VDC heater to function below 0º C (32º F)is available as an option

Specially designed for outdoor installations

Size:3.2” / 4.5” / 1.5”80mm / 115mm / 40mm

Requirement: on-line or off-line wall-readercontrol unit


ADVANCE RFIDCard Reader

� Compatible with ADVANCE RFID electronic lockingsystems

� Reads 1k, 4k and UltraLight tokens

� ADA compliant. ADA opening timer

� Multiple opening devices including: cards,wristbands, keychains, lanyards and Near FieldCommunication (NFC) compatible cellular devices

� LED indicates access granted or access deniedstatus

� Reads RFID cards and sends the information to thewall reader control unit (on- or off-line)

� Available with stainless steel or black faceplates

� Requirement: on-line or off-line wall-reader controlunit

Features

� Allows both on-line and off-line configurations

� Unlimited masterkeying potential

� Flexible installation: surface mount or flush mount

� Fits in U.S. double-gang or European 100 x 100box

� Tamper switch generates audit log if the wallreader is removed from the wall

Benefits

Off-line / On-lineSecure your property with card readers at perimeter doors,elevators, parking areas, pools, health facilities, etc.

The on-line card readers allow reception personnel to checkopenings as well as authorize or deny card access in realtime. Non-volatile memory supports an audit trail of the last8,000 openings, and an anti-passback function is alsoincorporated.

The off-line card readers allow only authorized card holdersto gain access, and the audit trail retains the last 500openings.

Card readers are programmable, just like any Onity lock.Perfect for interior or exterior use.

© O

nity

201

2. A

ll rig

hts

rese

rved

. Da

ta s

ubje

ct to

cha

nge

with

out n

otic

e.


FeaturesCompatible with HT28 Smart electronic lockingsystems

Allows both on-line and off-line configurations

Reads magnetic and smart cards and sendsthe information to the wall reader control unit(on- or off-line)

Red and green LED´s to indicate status

Size:3.2” / 4.5” / 1.5”80mm / 115mm / 40mm

Requirement: on-line or off-line wall-readercontrol unit

Secure your property with card readers at perimeter doors,elevators, parking areas, pools, health facilities, etc.

The on-line card readers allow reception personnel to checkopenings as well as authorize or deny card access in real time. Non-volatile memory supports an audit trail of the last 8 000 openings,and an anti-passback function is also incorporated.

The off-line card readers allow only authorized card holders to gainaccess, and the audit trail retains the last 500 openings. CardReaders are programmable, just like any Onity lock.

There are also special versions for elevators which can optionallyincorporate an area control board that allows filtering the access toeight different areas from one single reader.

On-line connection

Off-line connection

off-line/on-line

Dual Smart/Mag-Stripe Card Reader


Lockcases and Latches

TubularUL approved latch installs ina standard prep for acylindrical lock. UL/ULClisted for installation on firedoors. Standard squarecornered 1/2” latch.

Mortise, Latch OnlyANSI standard mortise lockwithout deadbolt. UL/ULClisted for installation on firedoors. 3/4” latch.

Mortise with DeadboltANSI standard mortise lockwith 1” deadbolt that may beprojected from either side ofthe door. UL/ULC listed forinstallation on fire doors.3/4” latch.

Mortise with AutoDeadboltANSI standard mortise lockwith 1” deadbolt thatprojects automatically.UL/ULC listed for installationon fire doors. 3/4” latch.*

Lockcases

Note: 2 1/2” narrow fronts or backset mortise lockcase available on request.

* Protected by US patent 6,578,888 B1, other patents pending.

Most Common Part Numbers

Part Numbers Part NumbersItem Description (left-hand) (right-hand)

Cylindrical Latch (satin chrome) QF 100 260 (2 3/4” backset) QF 100 340 (2 3/8” backset)

Mortise Lockcase, Latch Only GL 200 160 GL 200 180

Mortise Lockcase with Deadbolt GS 100 100 GS 100 120

Mortise Lockcase with AutoDeadbolt GA 100 241 GA 100 261


Levers and Finishes

LeversOnity HT Series locks come standard with theToledo lever. The remaining samples shown areavailable by request.

Most Common Part Numbers(all numbers given are in satin chrome finish)

Part NumbersItem Description (right-hand)

Toledo Outside Lever JH 400 480(has a 1/2” return)*

Toledo Inside Lever JH 400 580

Granada Lever JH 400 720

Barcelona Lever JH 400 920

Jerez Lever JH 500 180

* Note: Some state fire codes require that leverhandles installed on corridor doors must returnto within 1/2” of the door surface.

Finishes� Onity HT Series locks are available in the finishes shown below.

Toledo

Granada Barcelona

Jerez

Antique Brass (609) Polished Brass (605) Satin Chrome (626) Satin Brass (606)


Strike PlatesStandard Mortise4 7/8” 10” 12”

Latch Only Mortise4 7/8” 10” 12”

Cylindrical2 3/4” 4 7/8”

Cover Plates5 x 13 1/4” 5 x 18”

Face PlatesStandard

Latch Only

Wrap Plates(Please contact a Sales Representativefor ordering information on wrap plates)

Finishes� Onity Strike Plates, Cover Plates, Face Plates and Wrap Plates are available in the finishes shown below.

*Latch Only & Cylindrical Strikes not shown.

*Latch Only Faceplate not shown.


Strike Plates* Face Plates*

Cover Plate Wrap Plate

Antique Brass (609) Polished Brass (605) Satin Chrome (626) Satin Brass (606)



Most Common Part Numbers

(all numbers given are for right handed parts, satin chrome finish)

Item Description Part Number

Standard Mortise Strike Plate 4 7/8” HE 500 180

Standard Mortise Strike Plate 10” HE 200 540

Standard Mortise Strike Plate 12” HE 300 800

Latch Only Mortise Strike Plate 4 7/8” HE 400 440

Latch Only Mortise Strike Plate 10” HE 600 140

Latch Only Mortise Strike Plate 12” HE 600 260

Cylindrical Strike Plate 2 3/4” HE 600 440

Cylindrical Strike Plate 4 7/8” HE 500 580

Cover Plate 5 x 13 1/4” HQ 200 160

Cover Plate 5 x 18” HQ 200 240

Standard Face Plate HF 100 360

Latch Only Face Plate HF 100 660


Item Description Part NumberA Privacy Cable QH 200 700

B Weather Gasket QH 300 560

C Back Plate Standard QH 200 860

D Clutch Cover Gasket QH 300 560(comes with Weather Gasket)

E Clutch Kit QH 200 940

F Nylon Bearing QH 200 560

G Handle Return Plate QH 300 300

Item Description Part NumberH Circuit Board (HT24) RH 100 163

Circuit Board (HT28) RD 300 100

I Spring Assembly QH 200 580

J Reader Module (HT24) RH 100 120

Reader Module (HT28) RD 300 120

K Battery Cover Gasket QH 200 540

L Battery Module Cover QH 200 520(plastic insulator)

M Battery Module RH 100 100

HT Mortise LockInternal Components


HT Mortise LockExternal Components

All numbers given are for right handed parts,toledo lever, satin chrome finishItem Description Part Number1 Outside Lever (Handle) JH 400 480

(includes Outside Lever Mounting Screw)

2 Battery Cover Mounting Screw XS 400 440

3 Battery Cover JC 200 820

4 Outside Lever Mounting Screw XS 400 440

5 Reader Cover JC 200 680

5A Outside Trim (1/2 Lock) LM 200 420(comes with Internal Components,Reader Cover, Battery Cover and Lever)

Item Description Part Number6 Privacy Cable QH 200 700

7 Mounting Plate QH 200 900

8 Mounting Screws (pk) XS 400 540

9 Inside Escutcheon JE 300 200

10 Thumb Turn JH 400 220

11 Inside Lever (Handle) JH 400 580

12 Inside Lever Mounting Screw XS 400 420

13 Thumb Turn Screw XS 400 420

12mm

T10x8mm

T10x12mm

8mm

-ELECTRONICLOCKWITHMORTISE

LOCK

-CERRADURAELECTRONICACONCERRADURADEEMBUTIR

-SERRUREELECTRONIQUEAVECSERRUREALARDER

ADVANCE-ANSI

INSTALLATION

INSTALACIÓN

INSTALLING

A

B

B


Electronic In-Room Safes


© O

nity

201

2. A

ll rig

hts

rese

rved

. Da

ta s

ubje

ct to

cha

nge

with

out n

otic

e.

Digital Keypad Safe with Audit Trail

OS200

FeaturesUser Friendly

6-Digit Green LED Display

3, 4, 5 or 6-Digit Pin Code Option

Resident Master Code

Master Code Unique to Each Facility

Audit Trail on Safe Display: Last 100 Operations

Mechanical Key Override

On Hold Time After 4 Wrong Consecutive Attempts(optional)

2 Solid Steel, Anti-Drill Rotating Bolts

Works with 4 AA Standard Batteries

Low Battery Consumption

Power-Status Display on Screen

ADA-Compliant Keypad

"Code to Close" Technology

Portable Programmer Password Protected

Internal DimensionsLaptop Safe

6.77” 172mm

16.34” 415mm

11.81” 300mm

6.6 Gal 21 Lts

Laptop Safe

7.87” 200mm

16.54” 420mm

14.53” 369mm

27.90 lbs 12.7 kgs

Height:

Width:

Depth:

Volume:

Height:

Width:

Depth:

Weight:

External Dimensions

The OS200 is one of Onity’s newest electronic in-room safes. Itsuser-friendly operation coupled with a high level of reliability andfunctionality makes it an ideal safe for any application.

Internal DimensionsLaptop Safe- 17”

7.68” 195mm

19.80” 503mm

12.52” 318mm

6.9 Gal 26 Lts

Height:

Width:

Depth:

Volume:

External DimensionsLaptop Safe- 17”

7.87” 200mm

20.00” 508mm

14.65” 372mm

37.40 lbs 17 kgs

Height:

Width:

Depth:

Weight:

1-866-86-Onity 1-866-86-Onitywww.Onity.com www.Onity.com1-866-86-Onity 1-866-86-Onitywww.Onity.com www.Onity.com

© O

nity

201

2. A

ll rig

hts

rese

rved

. Da

ta s

ubje

ct to

cha

nge

with

out n

otic

e.

Digital Keypad Safe with Printable Audit Trail

FeaturesUser Friendly

6-Digit Display

3, 4, 5 or 6-Digit Pin Code Option

ADA Compliant

"Code to Close" Technology

On Hold Time After 4 Wrong ConsecutiveAttempts (optional)

Programmable Shut Down Mode

Non-Resident Master Code

Audit Trail records the last 1,000 Operations

Insertion Protected Door

Reinforced Bolt Frame

2 Solid Steel, Anti-Drill Rotating Bolts

Anti-Theft Labyrinth Mechanism

Portable Programmer Password Protected

Four (4) AA Batteries

Low-Consumption Motor

Power-Status Display

Available in 2 sizes

OS400

Internal DimensionsBusiness Safe

7.87” 200mm

16.54” 420mm

16.54” 420mm

10.2 Gal 38.6 Lts

Laptop Safe

7.87” 200mm

16.54” 420mm

13.00” 330mm

7.9 Gal 30 Lts

Business Safe

8.03” 204mm

16.69” 424mm

18.10” 460mm

37.36 lbs 17 kgs

Laptop Safe

8.03” 204mm

16.69” 424mm

14.56” 370mm

35.50 lbs 16.1 kgs

Height:

Width:

Depth:

Volume:

Height:

Width:

Depth:

Weight:

External Dimensions

The OS400 is Onity’s most feature-enhanced electronic in-room safe.Its user-friendly operation coupled with a high level of reliability andfunctionality makes it an ideal safe for any application.

Handheld Computer Emergency Unit

(CEU)Non-Resident Master Code

Emergency Power Openings

Password Protected

User Friendly, Large Display

Records the last Operations from all safes on property


Keycard Interface Safe

© O

nity

201

2. A

ll rig

hts

rese

rved

. Da

ta s

ubje

ct to

cha

nge

with

out n

otic

e.

OS600

Compatible and designed with your HT22, HT24w and HT28 Smartelectronic locking systems in mind, the OS600 safe is the perfectaddition to your hotel’s security. OS600 safes are simple to use forboth guests and staff. Built with high standards of quality, reliabilityand security, the OS600 is a perfect solution for electronic in-roomsafes.

OS600� User Friendly

� 4-Digit Code only

� Audit Trail (last 100 entries)

� ADA Compliant Keypad

� Insertion Protection

� "Code to Close" Technology

� Shut-Down Mode

(30 minutes after 3 wrong attempts)

� 2 Solid Steel Bolts

� 4 AA Batteries

� Low-Consumption Motor

� Battery-Status Indicator (LEDs)

� Available in 5 sizes

� Compatible with HT22, HT24w and

HT28 Smart Locking Systems

Portable Programmer� Emergency Openings

� Non-Resident Master Code

� Password Protected

Most Common Part Numbers� OS600 Black Laptop Safe, Left-handed

SF6 LLB

� Portable Programmer (XPP)PH 100 210


Performance Features4-Digit Code �6-Digit Code N/AADA Compliant �Buzzer Signal N/AReal Time Clock �"Code to Close Technology" �4 LR6 AA 1.5V Batteries �Low Consumption Motor �# Operation with 4 AA 3,000Power Status Indicator �Audit Trail/# Operations Recorded 100Portable Unit w/Built-in Printer N/APortable Unit �Portable Unit Password Protected �Multiple Operator Procedure N/AEmergency Power Supply �Shut Down Mode �Programmable Shut Down Mode N/ANon Resident Master Code �Rental Mode/Frt. Desk Printed Ticket N/ARental Mode/Keycard Compatible �Rental Activity Reports �PMS Interface �Compatible Card Locks: HT22, HT24w, HT28 SmartMain Power Supply �Inside Shelf (Suite Only) �Pedestal �Internal Power Outlet �

Mechanical FeaturesLeft Hinges �Spring Loaded Door �Two Solid Steel Bolts �Insertion Protected Door �Door Mounted Mechanism �Replaceable Mechanism �Tamper Proof Screws �Digital Display N/ALED �

ServiceOnity Worldwide Service �

SizesSuite Size �Business Size �Laptop Size �Mini Size �Wall Size �

FinishesIvory Finish �Matte Black Finish �Corrosion / Scratch Resistant Finish �

© O

nity

201

2. A

ll rig

hts

rese

rved

. Da

ta s

ubje

ct to

cha

nge

with

out n

otic

e.

BUSINESSLAPTOP

MINI

External Dimensions

Also Available in SUITE and WALL Sizes

OS600

Keycard Interface Safe

� Standard� OptionalN/A Not Applicable

Height:

Width:

Depth:

Volume:

Weight:

Suite Safe22.44” 570mm

14.56” 370mm

15.35” 390mm

21.5 gal 81.5 L

66.3 lbs 30 kg

Business Safe7.87” 200mm

16.53” 420mm

18.11” 460mm

10.2 gal 38.6L

48 lbs 21.8 kg

Laptop Safe7.87” 200mm

16.53” 420mm

14.56” 370mm

8.2 gal 31 L

38.6 lbs 17.5 kg

Mini Safe7.87” 200mm

16.53” 420mm

8.60” 220mm

4.9 gal 18.5 L

23.1 lbs 10.5 kg

Wall Safe16.53” 420mm

13.78” 350mm

5.50” 140mm

5.4 gal 20.5 L

40.5 lbs 18.4 kg


Energy Management Solutions



SensorStat® is a state-of-the-art digitalthermostat and occupancy sensingsetback controller. Its intelligent tech-nology manages the energy consumptionof HVAC systems such as those in hotelsor college residences including: PTAC,Heat Pump, Split Systems, and Fan CoilUnits. Since there is a computer chip ineach unit, every room actually has itsown energy management system.

The SensorStat®

uses two devices thatwork in conjunction with each another todetermine the occupancy status of aroom. These devices are a passiveinfrared (PIR) sensor and a flush-mounted door switch. When the dooropens and closes, the door switch

signals the SensorStat®

to search foroccupants. The PIR senses both bodyheat and motion, so it onlyacknowledges people, not blowingcurtains or ceiling fans in the room.Once a presence is detected, theSensorStat

®locks into Occupied Mode

giving control of the thermostat to theoccupant, then directs the HVAC systemto accurately adjust the temperature ofthe room to the occupant’s selectedsetting.

When the occupant leaves the room, thedoor switch again triggers the PIR in theSensorStat

®to check for occupants.

After it is determined that the room hasbeen unoccupied for a certain number of

minutes (which is selectable), theSensorStat

®goes into Unoccupied Mode

and automatically sets the roomtemperature back to a comfortable, yetenergy-saving level (setback). While inUnoccupied Mode, the PIR continuouslysearches for motion and if a presence isdetected at any time, the SensorStat

®

immediately goes back into OccupiedMode. Setback temperatures areprogrammable for each individualproperty’s requirements, and they neverallow a room to become too cool orwarm. This enables the HVAC to quickly recover to the occupant’s settemperature when the SensorStat

®is

returned to Occupied Mode.

Central FCU HVAC Room ControlCentral HVAC system that heats/cools a room by a Fan Coil Unit.(horizontal or vertical)

SensorStat®

All wires are hiddenunder carpet andbehind walls.

Flush Mounted MagneticDoor Switch

SensorStat®

All wires are hiddenunder carpet and behindwalls.

Flush Mounted Magnetic Door Switch

Package Terminal (PTAC) or Heat Pump through-the-wall unit that heats/cools a room.

PTAC/Heat Pump Room Control

Please note:The SensorStat

®DDC can control interior and exterior doors.

A remote PIR can be added to SensorStat®

for suite applications.

© O

nity

201

2. A

ll rig

hts

rese

rved

. Da

ta s

ubje

ct to

cha

nge

with

out n

otic

e. ®

Sen

erco

mm

is a

reg

iste

red

trad

emar

k of

Oni

ty.


Onity presents a feature rich line of products with innovative designs and unsurpassed performance. Offered are the most technologically advanced Energy Management Solutions with models for every application.

Special Features

Refresh CycleThis feature cycles the HVAC unit at setintervals to keep the air in the roomcirculating. This reduces humidityassociated problems and will keeprooms feeling fresh and smelling clean.

Soft Bypass®

The Soft Bypass®

feature allows you togive complete control of the HVAC to theoccupant for the duration of their stay.The energy management system isbypassed with a simple operation. Norewiring is required.

Lighting ControlA simple relay connection allows theenergy management system to turn offlights or other appliances when thesleeping room is unoccupied.

Optional Features

PRIVACY PLEASE!

Senercomm’s®

Privacy Please! remote occupancydetect ion sys tem he lps avo id unnecessary orembarrassing occupant interruptions. Your occupantsremain undisturbed because staff can immediately anddiscreetly identify occupied rooms.

The system consists of a hand held scanner used by yourstaff to quickly and accurately determine room occupancystatus. The SensorStat

®device in the sleeping room

connects to a small red diode in the doorframe which canonly be seen using the infrared beam of the hand-heldscanner. A red signal indicates an occupied room based onthe status of the SensorStat

®device. A green signal

indicates a room is unoccupied, even though a "Do notdisturb" sign may have been inadvertently left on the door.

Using Privacy Please! can help increase staff efficiency andproductivity as well as occupant satisfaction.

PATENTED “5 STAR COMFORT” HUMIDITY & CONDENSATION CONTROL

Using Senercomm’s®

patented "5 Star Comfort" HumidityControl, occupants can experience the benefits of aroom’s humidity level being monitored, managed, andreduced. At the same time, it provides greater savings inequipment due to mold and mildew damage.

The most favorable conditions for mold and mildew aretemperatures above 72°F and relative humidity above60%. The SensorStat

®DDC has an optional humidity

module that can be added to maintain a room environmentoutside the mold and mildew zone.

In the Unoccupied or Unsold mode, once the SensorStat®

DDC reaches its summer setback temperature, it reads theroom’s relative humidity. If the humidity is less than 60%, theSensorStat

®DDC will function normally to maintain

temperature in the room within the setback limits. However,anytime the relative humidity reaches above 60%, theSensorStat

®DDC will turn on the HVAC system and reduce

the temperature to 72°F. The temperature will then beallowed to rise to its setback point, at which point thehumidity level is read again. As soon as the relative humidityfalls below 60%, the system resumes normal operation;however, if the relative humidity is still above 60% the cyclewill be repeated.

© O

nity

201

2. A

ll rig

hts

rese

rved

. Da

ta s

ubje

ct to

cha

nge

with

out n

otic

e. ®

Sen

erco

mm

is a

reg

iste

red

trad

emar

k of

Oni

ty.



© O

nity

201

2. A

ll rig

hts

rese

rved

. Da

ta s

ubje

ct to

cha

nge

with

out n

otic

e. ®

Sen

erco

mm

is a

reg

iste

red

trad

emar

k of

Oni

ty.

SensorStat® DDC 2-F

Finally… the new standard of intelligence foroccupant room comfort and managementsolutions is here!

SensorStat® DDC merges digital control withpassive infrared (PIR) occupancy sensing, andprogrammable temperature setbacks tocreate the latest technology in the industrytoday.

The SensorStat® DDC is specificallydesigned to electronically control HVACsystems, improve occupant comfort, andincrease energy efficiency throughoccupancy-based setback strategies. Whenupgraded, the SensorStat® DDC 2-Fprovides operational input via a Windows®-based software system...innPULSE®.

SensorStat® DDC features a new slim-linehousing architecture with a stylish design thatis pleasing to the occupant both visually andfunctionally. It is easy to install and veryaffordable.

In a typical application, the SensorStat® DDCis installed on an interior wall and functions asthe room thermostat. The SensorStat ® DDCinterfaces with virtually all types of HVACsystems (through-wall PTAC, fan-coil units, orsplit systems) and replaces existing line-voltage AC/DC thermostats (mechanical ordigital) or improves upon existing controls.

SensorStat® DDC uses the proven logic ofmonitoring the status of entry doors(open/closed) plus physical occupancydetected by its concealed PIR sensor topositively determine if the room is occupiedor unoccupied. Once determined, theautomatic setback feature will engage thepre-programmed energy and comfort controlfunctions. In addition to providing completeroom HVAC control, the on-line version alsocommunicates over twisted pair providingreal time central monitoring and managementcapabilities via innPULSE® software.

FeaturesAverage Calculated Savings of 25-35%

Enhanced Occupant Comfort

Attractive, Easy-To-Operate Design

Reduced Maintenance Costs and ExtendedEquipment Life

Direct Digital Temperature Control Within1-Degree Accuracy

Selectable Fahrenheit or Celsius Display

“Automatic” or “Manual” Fan Control Modes

Automatic Changeover Heat/CoolOperation

Programmable Setback Limits While Room Is Unoccupied

Deep Programmable Setback Limits While Room Is Unused

Ease of Installation and Replacement

Monitors Interior and ExteriorDoors/Windows

Refresh Cycle

Soft Bypass®

Humidity Sensing & Control

Real Time Clock

Backlit LCD

Remote Management & Control Capabilitieswith innPULSE® Online CommunicationsNetwork

OptionsHigh Speed Two-Way Communication (innPULSE® )

Privacy Please!

Hand-Held Programmer

Wireless Peripherals

Part Number� BE 400 215


© O

nity

201

2. A

ll rig

hts

rese

rved

. Da

ta s

ubje

ct to

cha

nge

with

out n

otic

e. ®

Sen

erco

mm

is a

reg

iste

red

trad

emar

k of

Oni

ty.

Required Equipment (Per Room)SensorStat® DDC 2-FDoor Switch (flush or recessed mount)Quick Connect Field Wiring Cable

Optional AccessoriesPrivacy Please allows authorized staff members to detect occupancy status from outside the room, without knocking or disturbing occupants.

Privacy Please! IR Transmitter (1 per room)

Privacy Please! IR Scanner

RS485 innPULSE® communications module

Wireless Interface Communication Module for wireless periperals

Wireless Door Switch Tranceivers

Wireless Remote PIRs, for multi-room suites

Wired Sensor Communication Module

Wired Door Switch Tranceivers

Wired Remote PIRs, for multi-room suites

Wired Remote Temp Sensor

Wired Mini-Bar Switch

SensorStat® DDC 2-F


© O

nity

201

2. A

ll rig

hts

rese

rved

. Da

ta s

ubje

ct to

cha

nge

with

out n

otic

e. ®

Sen

erco

mm

is a

reg

iste

red

trad

emar

k of

Oni

ty.

Features25-35% Average Reduction In HVAC Run-Time

Battery Powered - Install Anywhere

No Wiring Between Devices

Backlit LCD Display

Reduced Maintenance Costs and Extended Equipment Life

Direct Digital Temperature Control Within 1 Degree Accuracy

Selectable Fahrenheit or Celsius Display

Automatic or Manual Fan Control

Automatic Changeover Heat/Cool Operation

Setback Limits – Unoccupied

Deep Setback Limits – Unused

Monitors Interior and Exterior, Adjoining Doors and Windows

Refresh Cycle

Freeze Guard

Soft Bypass®

Wireless - RF CommunicationFrequency Hopping Spread Spectrum;Internal Antenna

OptionsWireless Device Area Network Communication

Humidity Sensing

Remote Temperature Sensor

Real Time Clock (RTC) Module (replaces door switch)

SensorStat® Wireless DDC

The SensorStat® W ireless DDC system complements our rangeof DDC series and is the first step to a fully integrated intelligentwireless room. You get the features of an on-line system at theprice of stand-alone.

The battery powered, wireless control system allows theinstallation of the Thermostat, door switch(s) and remote PIRsensor(s) without the need for any wire at all between devices.

Each device operates wirelessly and is powered by 3 AAbatteries.

The Wireless DDC simplifies installation,offering a product thatis able to be installed in a fraction of the time needed for aclassic wired system.

By being wireless, this system will enable installation in retrofitsituations where holes cannot be made in the walls - or wherethe installation cost previously proved to be prohibitive due toconstruction materials or union issues.

The various elements of the system communicate with eachother completely wire free.

EMS System

Part Number� BW 100 105

� FCC Approved

� Industry Canada Approved


© O

nity

201

2. A

ll rig

hts

rese

rved

. Da

ta s

ubje

ct to

cha

nge

with

out n

otic

e. ®

Sen

erco

mm

is a

reg

iste

red

trad

emar

k of

Oni

ty.

SensorStat® DDCSavings Opportunities

Occupant Departure:• Sunday, 11am

Your occupants check out.The thermostat is left on High Cool.

• Thursday, 6pmYour new occupants check in to anuncomfortably cold room and you’vewasted money cooling an unsold spacefor 4 days.

Housekeeping:• Monday, 10am

The housekeeper enters the room and turnsdown the thermostat while cleaning.

• Monday, 10:15amThe housekeeper leaves the room.

• Monday, 6:30pmYour occupant returns to an uncomfortably coldroom and you’ve wasted money cooling an unoccupied space all day.

Windows:• Wednesday, 1pm

Your occupant opens the window and forgets to close it.

• Wednesday, 2pmYour occupant leaves with the heater running.

• Wednesday, 11pmYour occupant returns and you’ve been heating the parking lot for 9 hours.

With your standard thermostats,these situations cost youenormous amounts of money:

Occupant Departure:• Sunday, 11am

Your occupants check out.The thermostat is left on High Cool.

• Sunday, 11:08amSensorStat

®, after scanning for occupancy, goes

into Setback Mode setting the temperature to anenergy saving level.

• Monday, 3amSensorStat

®, after noting that the room is still

unoccupied, goes into Deep Setback Modeincreasing the energy savings.

• Thursday, 6pmYour new occupants check in to a comfortable roomand you’ve saved money on 4 days’ cooling costs.

Windows:• Wednesday, 1pm

Your occupant opens the window and forgets to close it.

• Wednesday, 20 Seconds LaterThe HVAC shuts off.

• Wednesday, 2pmYour occupant leaves with the window open.

• Wednesday, 11pmYour occupant returns and closes the window.SensorStat

®turns the HVAC on and returns the

room to the temperature set by the occupant.

With SensorStats®, these

situations are opportunitiesfor savings:

Housekeeping:• Monday, 10am

The housekeeper enters the room and turns down the thermostat while cleaning.

• Monday, 10:15amThe housekeeper leaves the room.

• Monday, 10:23amSensorStat

®, after scanning for occupancy,

goes into Setback Mode.• Monday, 6:30pm

Your occupant returns to a comfortable room and you’ve saved money on 8 hours’ cooling costs.


The principle behind an energymanagement device in a sleeping roomis reducing energy waste when the roomis unoccupied without compromisingcomfort while the occupant is in theroom. Consider that up to 80% of youroccupant room utility bill is the HVACeven though occupants typically occupyrooms for only 10 hours out of every 24.This adds up to an excellent opportunityfor savings.

SensorStat®

is a state-of-the-art energymanagement device with an occupancysensing setback controller. It uses apassive infrared (PIR) sensor and a flush-mounted door switch that work inconjunction with each another topositively determine the occupancy

status of a room. When physicalpresence is detected, the SensorStat

®

gives control of the HVAC to theoccupant. When the occupant leaves theroom, the SensorStat

®automatically sets

the room temperature back to acomfortable, yet energy-saving level(setback). This setback level is generally5-7 degrees away from the occupant’sselected temperature, providing anaverage reduction in energy usage of 20-25%. Each degree translates to 3.33%savings in energy usage. In addition,there is a second level of savings wherethe setback is even deeper once a roomhas been determined to be unsold. Allsetbacks are programmable by theproperty to allow for maximum flexibility.

These energy savings levels, as well asoperational efficiencies provide a rapidreturn on investment. The typicalpayback period is only 24 - 30 months.Other indirect savings may furtherimprove the ROI. For example,SensorStat

®reduces expenditures for

FFE, extends the life of your HVACequipment, reduces HVAC filtermaintenance and other repair costs, andincreases occupant comfort... whichencourages a return stay.

Total Investment = $45,000.00 USDTotal first year savings = $25,864.13 USD

First year monthly savings = $2,155.34 USDTotal 5 year savings (after cost) = $84,320.67 USD

System payback occurs after 20.9 months.

Total first year savings = $25,864.13 USDHighest monthly savings = $3,426.74 USDLowest monthly savings = $958.57 USD

Onity/Senercomm offers a unique EnergySavings Estimator software program thatcan quickly provide a savings profilecustomized for your property whereelectricity is used to heat and cool

occupant rooms. The results estimatethe average monthly savings and Returnon Investment when using theSensorStat

®devices.

Sample Conditions200 Room Property with PTAC units300-400 avg. square feet per room.075 per kWh USD65% avg. occupancy

ENERGY SAVINGS ESTIMATOR

© O

nity

201

2. A

ll rig

hts

rese

rved

. Da

ta s

ubje

ct to

cha

nge

with

out n

otic

e. ®

Sen

erco

mm

is a

reg

iste

red

trad

emar

k of

Oni

ty.

SensorStat® DDCSavings Opportunities


© O

nity

201

2. A

ll rig

hts

rese

rved

. Da

ta s

ubje

ct to

cha

nge

with

out n

otic

e. ®

Sen

erco

mm

is a

reg

iste

red

trad

emar

k of

Oni

ty.

innPULSE®

Features30-40% Average Reduction In HVAC Run-Time

Microsoft Windows ® Compatible

Room Environment Monitoring

Property and Resident Room Management

Detect HVAC Trouble

Predictive Maintenance

Real Time Management Reports

Control HVAC Setback Automatically

Patented “5 Star” Humidity &Condensation Control

Engineering Default Alarms

Security Monitoring

Reduce Mini Bar Labor

Privacy Please!

Additional Productivity Savings

Additonal Wireless FeaturesWireless In-Room

Wireless from Room to Front Desk or Hotel Engineering

Surpassing typical energy managements ys t ems , i n nPULSE

®Operations

Manager is an advanced in - roominformat ion system wi thi n n o v a t i v e f e a t u re s d e s i g n e dspecif ical ly to reduce operationsexpenses, improve occupant services,and closely monitor facility occupantroom information in your property.innPULSE

®is Windows

®network

compatible.

innPULSE®

provides a total sleepingroom information and managementsystem which benefits engineering, foodand beverage, security, front office, andhousekeeping operations. innPULSE

®

virtually manages and monitors yoursleeping room operations 24 hours aday, even when you are not there.

The innPULSE®

Operations Managerexpands your in-room services into aninteractive, on- l ine communicationnetwork. innPULSE

®directly links your

electronic locks, safes, mini-bars,smoke detectors, and HVAC s y s t emw i t h i n d i v i d u a l departmentsthroughout the property. innPULSE

®

provides management with on-l inea larms, contro l funct ions, andoperational reports.

At the heart of innPULSE®

is theSenso rS t a t

®DDC , a sma r t ,

programmable HVAC controller andoccupancy based digital thermostat.

Keeping your expenses down andoccupants comfortable, while stayingahead of the competition is today’schallenge. In addition to providing theultimate in occupant comfort, innPULSE

®

will help your managers reduce laborcosts, control excessive energyconsumption, and extend the efficiencyand longevity of your furniture, fixtures,and equipment.

Now more than ever, it is easier and lessexpensive to reduce operating expenses,improve occupant comfort and, at thesame time, increase the return on yourtotal investment with the innPULSE

®

Operations Manager.


innPULSE ® continually transmits data from guest and resident room devices to multiple departments around your property. innPULSE ®

is not just a one way street; staff can use innPULSE ® to communicate with and remotely program various devices in the room, locatestaff and much more. innPULSE ® can also interface with Property Management and Resident Room Management Systems. It isWindows® compatible…easy to learn…easy to operate….and allows your staff to manage your property efficiently.

ROOM DEVICES SEND AND RECEIVE DATA WHILEPROPERTY DEPARTMENTS MONITOR INFORMATION AND SEND COMMANDS

SINGLE-STATION AND MULTI-USER VERSIONS AVAILABLE

Engineering & EnergyManagement SystemDemand Control Room Environment Efficiency HVAC Equipment EfficiencyAutomatic Load Shedding (kw)Location of staff

Property Management System orResident Room Management SystemHousekeeping StatusRoom Temperature & HumidityRoom Precool/PreheatRoom Inspection & Ready-to-sellMinibar Lockout

HousekeepingStaff Tracking & ProductivityRoom OccupancyRoom Cleaned StatusLocation of staff

General ManagementProperty Alarm StatusStaff Productivity ReportingProperty Occupancy ProfilesEnergy Usage AnalysisEquipment PerformanceLocation of staff

Food & BeverageMinibarRestock StatusLocation of staff

SecurityDoor Latch AlarmSmoke & Panic Button AlarmsIn-room Safe MonitoringDoor Locks Interrogation & Safe Audit trails

© O

nity

201

2. A

ll rig

hts

rese

rved

. Da

ta s

ubje

ct to

cha

nge

with

out n

otic

e. ®

Sen

erco

mm

is a

reg

iste

red

trad

emar

k of

Oni

ty.

innPULSE®

Download - Hospitality Products 2012ebusiness.onity.com/.../cms/HT+LOCKS+Product+Catalog_1.pdfHospitality Products 2012 Table of Contents ADVANCE Lock ADVANCE RFID Lock HT RFID Lock - *NEW* HT24

Top Related

Download - Hospitality Products 2012ebusiness.onity.com/.../cms/HT+LOCKS+Product+Catalog_1.pdfHospitality Products 2012 Table of Contents ADVANCE Lock ADVANCE RFID Lock HT RFID Lock - NEW HT24