Download - High Power Microwave Technology and Effects
![Page 1: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/1.jpg)
1
High Power Microwave Technology and Effects
A University of Maryland Short CoursePresented to MSIC
Redstone Arsenal, AlabamaAugust 8-12, 2005
![Page 2: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/2.jpg)
2
HPM Bibliography• High Power Microwave Sources,
eds. Granatstein and Alexeff, Artech House, 1987• High Power Microwaves,
by Benford and Swegle, Artech House, 1991• High Power Microwave Systems and Effects,
by Taylor and Giri, Taylor and Francis, 1994• Applications of High Power Microwaves,
eds. Gaponov- Grekhov & Granatstein, Artech House, 1994• Generation and Application of High Power Microwaves,
eds. Cairns and Phelps, J.W. Arrowsmith Ltd., 1977• High Power Microwave Sources and Technologies,
eds. Barker and Schamiloglu, IEEE Press, 2001• High-Power Electromagnetic Radiators, Nonlethal Weapons
& Other Applications, by Giri, Harvard Univ. Press, 2004• Modern Microwave and Millimeter-wave Power Electronics,
eds. Barker, Booske, Luhman and Nusinovich,IEEE Press & Wiley-Interscience, 2005
![Page 3: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/3.jpg)
3
Acknowledgements
Some of the material in these lecture notes weretaken from presentations by:
G. Nusinovich, University of MarylandA. Kehs, ARLD. Abe, NRLK. Hendricks, AFRL
![Page 4: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/4.jpg)
4
Course Outline• Aug 8 – Aug. 9, HPM Technology(Sources, Waveguides, Antennas, Propagation)
Presenter: Victor Granatstein ([email protected])
• Aug. 10, Microwave Upset of Electronic Ckts.Presenter: John Rodgers (rodgers @umd.edu)
• Aug.11, Chaos & Statistics of Microwave CouplingPresenter: Steve Anlage ([email protected])
• Aug. 12, Failure Mechanisms in Electronic DevicesPresenter: Neil Goldsman ([email protected])
![Page 5: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/5.jpg)
5
![Page 6: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/6.jpg)
6
Estimate of Required Power Density on “Target”(using “DREAM” a PC compatible application that estimates probability of RF upset or damage of a system’s electronics)
![Page 7: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/7.jpg)
7
HPM Sources, Waveguides, Antennas and Propagation
MicrowaveSource
Power, PtFreq., f = c/λ
PowerSupply
AntennaGain, Gt
- - - - - - - - - - SRange, RPath Loss, Lp
WaveguideLoss, Lt
Effective Isotropic Radiated Power, EIRP = Pt Gt / LtPower Density at “Target”, S = (4π/λ2) ( EIRP/ Lp)
In free space, Lp = Lf = (4πR / λ )2 and S = EIRP / (4π R2)
![Page 8: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/8.jpg)
8
A Note on Using Decibels
Example: EIRP = Pt Gt / LtEIRP(dBW) = Pt (dBW) + Gt (dBi) – Lt (dB)
If Pt = 63 dBW, Gt = 23 dBi, Lt = 2 dB Then, EIRP(dBW) = 63 dBW + 23 dBi – 2dB = 84 dBW
or EIRP = 108.4 Watts = 2.51 x 108 Watts = 251 Megawatts
![Page 9: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/9.jpg)
9
HIGH POWER MICROWAVE SOURCES
![Page 10: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/10.jpg)
10
HPM Weapon Sources
![Page 11: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/11.jpg)
11
Narrowband HPM Sources
• Strongest effects observed for300 MHz < f < 3 GHz (1 meter > λ >10 cm)
• Pulsed modulation is more effective than CWwith pulse duration 100 nsec < τ < 1 µsec
• Pav = PP x τ x PRFPRF is Pulse Repetition Frequency
![Page 12: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/12.jpg)
12
![Page 13: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/13.jpg)
13
Domains of Application:Single Device Peak Power
Performance Limits
VacuumSolid State
10-1 1 10 2 10 3 10 4 5 1010
109
8 10
7 10
6 10
5 10
4 10
3 10
2 10
1 10
Frequency (GHz)
Peak
Pow
er (W
)
1010
High PowerRadar
(0.01 - 0.1)
Duty Factor ( )
EW (0.01 - 1.0)
Low Power Radar (0.01 - 0.1)
Communications (1.0)
FusionHeating
(1.0)
AdvancedRF
Accelerators(< 0.001)
τ < 0.1µs
τ > 1.0 µs
τ > 1.0 µsτ < 0.1µs
Materials Research,Chemistry, Biophysics,
Plasma Diagnostics(0.01 - 0.5)
HPM(10-9 - 1.0)
![Page 14: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/14.jpg)
14
Source Performance (Average Power)State of Technology
101.1 100 1000Frequency (GHz)
10
10
10
10
10
10
10
1
10
10
-1
-2
2
3
4
5
6
7
SITSolenoid Focused CC - TWT
Vacuum Devices
Solid State Devices
Aver
age
Pow
er (W
)
Gridded TubeKlystron
CFA
Gyrotron
PPM Focused Helix TWT
Si BJT
PHEMT
IMPATT
MESFET
![Page 15: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/15.jpg)
15
Microwave Source TechnologyGrowth Rate of Average Power
196019501940 1970 1980 19901930 2000
Time (Years)
10-2
1 GHz
10 GHz
10 GHz
100 GHz
1 GHz
100 GHz
VacuumSolid State
10-1
1
10
102
103
104
105
106
107
Aver
age
Pow
er (W
atts
)
30 GHz
3 GHz
3 GHz
30 GHz
Demand Limited
Materials Limited
![Page 16: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/16.jpg)
16
Physics of HPM sourcesPhysics of HPM sources is very much the same asthe physics of traditional microwave vacuum electron devices. However,a) Some new mechanisms of microwave radiationare possible (e.g., cyclotron maser instability);b) Some peculiarities in the physics of wave-beaminteraction occur at high voltages, when electronvelocity approaches the speed of light.
History of HPM sources starts from the late 1960’s when the first high-current accelerators (V>1 MeV, I>1 kA) were developed (Link, 1967; Graybill and Nablo, 1967; Ford et al, 1967)
![Page 17: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/17.jpg)
17
Microwave radiation by “free”electrons
In practically all sources of HPM radiation, the radiation is produced by electrons propagating in the vacuum (free electrons).
How to force electrons to radiate electromagnetic (EM) waves?
An electron moving with a constant velocity in vacuum does not radiate!
Hence, electrons should either move with a variable velocity or with a constant velocity, but not in vacuum.
![Page 18: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/18.jpg)
18
Three kinds of microwave radiationI. Cherenkov radiation:Electrons move in a medium where their velocity exceeds the phasevelocity of the EM wave.
When the medium can be characterized by a refractive index, n, the wave phase velocity, , there is equal to c/n (where c is the speed of light). So, in media with n>1, the waves propagate slowly (slow waves) and , hence, electrons can move faster than the wave:
In such a case the electrons can be decelerated by the wave, which means that electrons will transfer a part of their energy to the wave.In other words, the energy of electrons can be partly transformedinto the energy of microwave radiation.
phv
/ph elv c n v c= < <
![Page 19: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/19.jpg)
19
IA. Smith-Purcell radiation
When there is a periodic structure (with a period d) confiningEM waves, the fields of these waves can be treated as superposition of space harmonics of the waves (Floquet theorem)
where is the wave propagation constant for the l-th space harmonic. Thus, the wave phase velocity of such harmonics (l>1), , can be smaller than the speed of light and therefore for them the condition for Cherenkov radiation can be fulfilled.Smith-Purcell radiation can be treated as a kind of Cherenkov radiation.
( )Re li t k zl
l
E A e ωα∞
−
=−∞
⎧ ⎫= ⎨ ⎬⎩ ⎭
∑
0 2 /lk k l dπ= +
, /ph l lv kω=
![Page 20: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/20.jpg)
20
Slow-wave structures (cont.)
C. Rippled-wall SWS
The wave group velocitycan be either positive (TWT) or negative (BWO)
/gr zv kω= ∂ ∂
Group velocity is the speed of propagation of EM energy along theWaveguide axis
![Page 21: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/21.jpg)
21
Slow waves
When the wave propagates along the device axis with phase velocity ω/kz smaller than the speed of light cthis means that its transverse wavenumber k⊥ has an imaginary value, because k⊥
2 = (ω / c)2 – kz2 < 1
This fact means localization of a slow wave near the surface of a slow-wave structure.An electron beam should also be locatedin this region to provide for strong coupling of electrons to the wave.As the beam voltage increases, the electron velocity approaches thespeed of light. Correspondingly, the wave can also propagate withthe velocity close to speed of light. (Shallow slow-wave structures)
![Page 22: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/22.jpg)
22
II. Transition radiation
In a classical sense, TR occurs when a chargedparticle crosses the border between two mediawith different refractive indices.The same happens in the presence of someperturbations in the space, such as conducting grids or plates. (Grids in RF tubes, e.g., triodes etc).Cavities with small holes for beam transportcan play the role of such perturbations as well.
![Page 23: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/23.jpg)
23
III. BremsstrahlungThis sort of radiation occurs when electrons exhibit oscillatory motion in external magnetic or electric fields.These fields can be either constant or periodic.
Doppler-shifted wave frequency is equal to the frequency of electron oscillations, , or its harmonic:
z zk v sω − = ΩΩ
Example: electron motionin a wiggler, which is a periodic set of magnets
![Page 24: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/24.jpg)
24
Coherent radiation
So far, we considered the radiation of a single particle.This radiation is called spontaneous radiation.In HPM sources, a huge number of electrons passes throughthe interaction space.For instance, in the case of a 1-MV, 1-kA e-beam about
particles pass through the interaction space every nsec.
When these particles radiate electromagnetic waves in phase, i.e. coherently, the radiated power scales as while in the case of spontaneous radiation the radiated power is proportional to
126 10⋅
2N
N
NHow to force this huge number of particles to radiate coherently?
![Page 25: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/25.jpg)
25
Coherent radiation (cont.)
Electrons can radiate in phase when they are gathered in compact bunches.In some cases such bunches can be prepared in advance(photo-emitters).Most often, however, the bunches are formed in the interaction space as a result of interaction between theRF field and initially uniformly distributed electrons.
![Page 26: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/26.jpg)
26
Sources of coherent Cherenkov/Smith-Purcell radiation
- Traveling-wave tubes- Backward-wave oscillators
-Magnetrons (cross-field devices)-MILOs
To provide the synchronism between electrons and EMwaves, in all these devices periodic slow-wave structures are used.
![Page 27: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/27.jpg)
27
Slow-wave structures (SWS’s)
A. Helix slow-wave structure
Assume that the wave propagatesalong the wire with the speed of lightPitch angle tan 2 /a dθ π=
sinphv c θ=Phase velocity of the wave along the axis
This phase velocity does not depend on frequency.No dispersion! Electrons can be in synchronism with the wave of anarbitrary frequency -very large bandwidth is possible.
( )phv constω =
![Page 28: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/28.jpg)
28
Slow-wave structures (cont.)
B. Coupled-cavity SWS’s
These SWS’s do have dispersion.However, they can handle a higher levelof microwave power.Thus, they can be used in the devicesintended for high-power,moderate bandwidth applications.
![Page 29: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/29.jpg)
29
Slow-wave structures (cont.)
![Page 30: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/30.jpg)
30
Traveling-wave tubes (TWT’s)Electrons moving linearly with the axial velocityinteract with the slow wave propagating along the device axis with the phase velocity close to
0zv
0zv
When the electron velocity slightly exceeds the wave phase velocity, the wave withdraws a part of the beam energy. This leads to amplification of the wave.
![Page 31: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/31.jpg)
31
Backward-wave oscillators (BWOs)
In BWOs, there is the synchronism between electrons and the positive phase velocity of the wave, but the group velocity is negative that meansthat the EM energy propagates towards the cathode. (Internal feedback loop)Then, this wave is reflected from the cutoff cross-section and moves towardsthe output waveguide without interaction with the beam.
![Page 32: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/32.jpg)
32
BWO driven GW-radarNanosecond Gigawatt Radar(NAGIRA) was built by RussiansFor the U.K.Radar is driven by an X-band, relativistic (0.5 MV) BWO: 10 GHz, 0.5 GW, 5 ns pulse, 150 Hz rep frequency
Short pulse (5 nsec) –large instantaneous bandwidth –possibilities to detect objects with antireflection coating
GEC-Marconi and the UKMinistry of Defense
![Page 33: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/33.jpg)
33
Pasotron: Plasma-Assisted BWOFig 1 Demonstrated at the U. Md. to operate with high efficiency (~50%)
without external magnet or filament power supply.Could be developed as compact lightweight airborne source.
![Page 34: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/34.jpg)
34
Fig. 5
Pasotron Power and Efficiency
0
0.2
0.4
0.6
25 30 35 40 45 500
400
800
1200
Power
Electronic efficiency
Total efficiency
Cathode current [A]
Eff
icie
ncy
Mic
row
ave
pow
er [k
W]
![Page 35: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/35.jpg)
35
Magnetrons
1) Drift velocity of electrons in crossed (E and H) fields is close to the phase velocity of the wave in the azimuthal direction –Cherenkov synchronism. Buneman-Hatree resonance condition2) Diameter of Larmor orbit should be smaller than the gapbetween cathode and anode. Hull cutoff3) All dimensions scale with the wavelength - ( )P λ
Electron spokesrotate synchronouslywith the EM waverotating azimuthally
![Page 36: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/36.jpg)
36
Relativistic Magnetrons• Many experiments with power from 10’s of
MW to GW have experienced pulse shortening.
• New simulations indicate a possible fix to operate at the several GW level without pulse shortening, at perhaps 50% source efficiency.– Nature of cathode may improve
performance
• Simulations indicate a very small window in parameter space may exist for proper operation.
• <5% variation in voltage, current and magnetic field.– Parameter space recently improved to
facilitate experiment
![Page 37: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/37.jpg)
37
MILO Basics•Low impedance, high power•Cross field source- applied Er, self-generated Bθ, axial electron flow•Device is very compact (No eternal focusing magnet )•Efficiency is limited , due to power used to generate self-insulating magnetic field•Cavity depth ~ λ/4•Electron drift velocity ve > microwave phase velocity vφ=2 p f, where p is the axial periodicity of the structure and f is the microwave frequency•Microwave circuit is eroded by repeated operation
![Page 38: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/38.jpg)
38
The MILO/HTMILO (AFRL)
•Initial work developed the mode of extraction and introduced the choke section•Power level up to 1.5 GW, mode competition and short Rf pulse•Our first experiment to use brazed construction•Observed loss of magnetic insulation when emission occurred under the choke vanes•Shifted cathode 5 cm downstream, reducing field stress under choke vanes, tripled pulse length, 2 GW, 330 J•Pulse power increased from 300 nsec to 600 nsec•Present work on increasing power to 3 GW for up to 500 nsec, tuning last vane < 1 cm raises power from 1 to 3 GW•Obtained a 400 nsec constant impedance at 450 kV
16.51 cm
![Page 39: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/39.jpg)
39
Sources of Coherent Transition Radiation
The best known source of coherent TR is the klystron (Varian brothers, 1939)
Klystrons are also known as velocity modulated tubes: initial modulation of electron energies in the input cavity causes due to electron ballistic bunching in drift region following this cavity the formation of electron bunches, which can producecoherent radiation in subsequent cavities.
Schematic of a 3-cavity klystron:1- cathode, 2 – heater, 3-focusing electrode, 4 – input cavity,5 – input coaxial coupler, 6 – intermediate cavity, 7 – outputcavity, 8 – output coaxial coupler, 9 – collector, 10, 11 – drift sections
![Page 40: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/40.jpg)
40
Klystron BasicsIntense Beam Klystron
•Electron dynamics are not single particle
•Collective effects are critical
•Space charge potential energy is a large fraction of the total energy
•Beam current is large enough that gating occurs at the modulation gaps
Classical Klystron Devices
•Electron dynamics are all single particle
•No collective effects
•Microwave voltage induces a velocity modulation; electron beam drift allows for density modulation
•Gap voltages are limited by breakdown electric fields
•Electron beam transverse dimension < λ
![Page 41: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/41.jpg)
41
Relativistic Klystron Amplifiers, RKAs,and Multiple Beam Klystrons, MBKs
• NRL Experiment- 15 GW, 100 nsec, 1.3 GHz
• First experiment to use non-linear space charge effect for beam modulation
• NRL proposed Triaxial concept. This is an example of a Multiple Beam Klystron (MBK). Other MBKs use separate drift tubes but common cavities
• MRC proved the basicphysics- 400 MW, 800 nsec, 11 GHz
![Page 42: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/42.jpg)
42
SuperReltron• Requires 1 MV(150/850 kV divider)/ ~2 kA pulse
power• pulse length 200 nsec to 1 µsec• 600 MW, >200 J radiated• demonstrated 50% efficiency• extraction in TE10 rectangular mode• 10’s of pulses per second
![Page 43: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/43.jpg)
43
![Page 44: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/44.jpg)
44
![Page 45: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/45.jpg)
45
Sources of coherent radiation from the beams of oscillating electrons
I. Cyclotron resonance masers, CRMs (gyrotrons)Electrons oscillate in a constant magnetic field
In the cyclotron resonance condition z zk v sω − = Ω0 /eB mcγΩ = Electron bunching is caused by the
relativistic effect – relativistic dependenceof electron mass on energy
![Page 46: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/46.jpg)
46
Cross-section of Gyrotron e-beam(before phase bunching) ωc = eB/γm
![Page 47: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/47.jpg)
47
Cross-section of Gyrotron e-beam(after phase bunching)
![Page 48: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/48.jpg)
48
Gyrotrons
Gyrotron is a specific configuration of CRM comprising a magnetron-type electron gun and an open microwave structure for producing high-power millimeter-wave radiation
![Page 49: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/49.jpg)
49
Gyrotron Principles
* Hollow beam of spiralling electrons used* Resonance at the electron cyclotron frequency (or
2nd harmonic) matched to frequency of high order cavity mode (discrimination against spurious modes)
* Electrons bunch in phase of their cyclotron orbits* Transverse dimensions of cavities and
e-beam may be much larger than the wavelength and high power operation may be extended to very high frequency
![Page 50: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/50.jpg)
50
Schematic of Gyrotron Oscillator and Amplifier Circuits
![Page 51: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/51.jpg)
51
GyromonotronDue to (a) the cyclotron resonance condition, which providesefficient interaction of gyrating electrons only with themodes of a microwave structure whose Doppler-shifter
frequencies are in resonance with gyrating electrons, and(b) high selectivity of open microwave circuits,gyrotrons can operate in very high-order modes
(e.g. TE22,6)
Interaction volume can be much larger than 3λGyrotrons can handle very high levels of averagepower – MWs CW at ~2 mm wavelength
![Page 52: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/52.jpg)
52
Gyromonotron (cont.)
Active denial technology hardwaredemonstration (fromUS AF web page)
110 GHz, 1 MW, CPIGyrotron (about 2.5 m long)
![Page 53: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/53.jpg)
53
![Page 54: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/54.jpg)
54
GyroklystronsIn contrast to gyrotron oscillators discussed above,gyroklystrons are amplifiers of input signals.Amplifiers produce phase-controlled radiation, Thus, they can be used in communication systems,radars and other applications requiring the phasecontrol (viz., phase arrays).
NRL (in collaboration with CPI and UMd):W-band (94 GHz) gyroklystrons and gyrotwystrons,100 kW peak, 10 kW average power
![Page 55: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/55.jpg)
55
Gyroklystrons (cont.)
Russian 1 MW, Ka-band (34 GHz) radar “Ruza”,Two 0.7 MW gyroklystrons (Tolkachev et al., IEEE AES Systems Mag., 2000)
![Page 56: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/56.jpg)
56
Gyroklystrons (cont.)
NRL W-band gyroklystron and “WARLOC” radar
![Page 57: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/57.jpg)
57
WAVEGUIDES
Assume uniform cross-section and wave propagation along z-axis as e-αz cos(ωt -βz)
(a) Transmission Lines or 2-Conductor Waveguides (e.g. Co-axial Cable)
(b) Hollow Pipe Waveguide (Rectangular and Circular)
![Page 58: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/58.jpg)
58
Dispersion CurvesIn 2-conductor transmission lines such as co-axial cable, a
TEM wave may propagate with no axial field components and dispersion relation
ω2 = β2 /(µε) = β2 c2 /εrwhere εr is the relative permittivity of the dielectric between the 2 coductors and c = 3 x 108 m/s is the speed of light in vacuum.
In hollow pipe waveguide no TEM wave can propagate. The modes of propagation are either TE (axial magnetic field present) or TM (axial electric field present) and the dispersion relation for each mode is
ω2 = β2c2 + ωc2
where fc = ωc /2π is called the cutoff frequency (usually a different value for each mode) and we have assumed that the waveguide is filled with gas for which to good approximation εr = 1. Note that for ω < ωc no real values of β are possible and the wave will not propagate.
![Page 59: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/59.jpg)
59
Co-axial Cable
Resistance /lengthOhms/meter
Inductance/lengthHenries/meter
Conductance/lengthSiemens/meter
Capacitance/lengthFarads/meter
Wave propagates in dielectric beween inner and outer conductorsa = inner radius; b = outer radius of dielectric. µ,ε,σ pertain to the dielectric; µc,σc pertain to the conductorsRs = (πf µc/σc)1/2 ; Characteristic Impedance Ro = (L’/C’)1/2
Power TransmittedP = 0.5 V2 / RoWhere V is peak voltagebetween the conductors
![Page 60: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/60.jpg)
60
![Page 61: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/61.jpg)
61
![Page 62: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/62.jpg)
62
![Page 63: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/63.jpg)
63
![Page 64: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/64.jpg)
64
Properties of Coax Cable Designed for High Voltage Pulse Operation
Cable designation: RG-193/Uo.d.: 2.1 inchesCharacteristic Impedance: Ro = 12.5 OhmsMaximum Operating Voltage: Vmax = 30,000 Volts
Maximum Power Transmitted: PP = 0.5 Vmax2 /Ro = 18 Megawatts
This value of peak power is inadequate for many HPM sources.Rectangular or circular waveguides designed for f = 1 GHz are larger in transverse dimensions than co-axial cable and can be filled with pressurized, high dielectric strength gas so that they can transmit higher peak power
![Page 65: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/65.jpg)
65
Hollow Pipe Waveguides are Analyzed Using Maxwell,s Equations
![Page 66: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/66.jpg)
66
![Page 67: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/67.jpg)
67
![Page 68: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/68.jpg)
68
![Page 69: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/69.jpg)
69
Boundary Conditions
![Page 70: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/70.jpg)
70
Source Free RegionsInside waveguide there are no sources (i.e., J = 0 and ρ = 0).Then, Maxwell.s curl equations become symmetric
∇ x E = jωµH ----- (1), ∇ x H = -jωεE ------ (2)
Taking the curl of Eq. (1) and substituting from Eq. (2) gives∇ x ∇x E = ω2 µε E
Next use the vector identity ∇ x ∇x E = ∇(∇. E) - ∇2 Eand the fact that in a sourceless uniform region ∇.E = ρ/ε = 0to get
∇2E + ω2 µε E = 0
This is the homogeneous Helmholtz equation in E. A similar equation could have been derived for H.
![Page 71: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/71.jpg)
71
![Page 72: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/72.jpg)
72
![Page 73: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/73.jpg)
73
![Page 74: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/74.jpg)
74
![Page 75: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/75.jpg)
75
![Page 76: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/76.jpg)
76
![Page 77: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/77.jpg)
77
![Page 78: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/78.jpg)
78
![Page 79: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/79.jpg)
79
![Page 80: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/80.jpg)
80
![Page 81: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/81.jpg)
81
![Page 82: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/82.jpg)
82
![Page 83: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/83.jpg)
83
![Page 84: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/84.jpg)
84
![Page 85: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/85.jpg)
85
![Page 86: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/86.jpg)
86
![Page 87: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/87.jpg)
87
Rectangular WaveguideHollow waveguides are high-pass devices allowing e.m. wave
propagation for frequencies above a cutoff frequency (f > fc)Propagation is in modes with well defined patterns of the e.m. fields(m peaks in magnitude across the wide dimension and n peaks across the small dimension) and with either an axial magnetic field (TM modes) or an axial electric field (TM modes)
For gas-filled waveguide with large dimension, a, and small dimension ,b, cutoff frequency for TEmn or TMmn modes is
fc = 0.5 c [ (m/a)2 + (n/b)2 ]1/2
Fundamental Mode (mode with lowesr cutoff freq.) is TE10 for whichfc = 0.5c/a
Usually a = 2b, and then the fundamental mode is the only propagating mode over an octave in frequency (factor of 2)
![Page 88: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/88.jpg)
88
E.M. Fields in the TE10 ModeEy = Eo sin(πx/a) sin(ωt-βz)
Hx = - (ZTE)-1 Ey , where ZTE = (µ/ε)1/2[1- (f/fc)2]-1
Hz = (2fµa)-1 Eo cos(πx/a) cos(ωt-βz)Ez = Ex = Hy = 0
![Page 89: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/89.jpg)
89
Attenuation in the TE10 Mode
1 Neper/m = 8.69 dB/m
![Page 90: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/90.jpg)
90
Specs of L-Band Rectangular Waveguide
Waveguide Designation: WR 770 or RG-205/U
Inner Dimensions: 7.7 inches x 3.85 inches19.56 cm x 9.78 cm
Cutoff Freq. (TE10): 0.767 GHz
Recommended Freq. Range: 0.96 – 1.45 GHz
Attenuation: 0.201 –0.136 dB/100ft.0.066 – 0.0045 dB/m
![Page 91: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/91.jpg)
91
Power Rating of Rectangular WaveguidePower flow in fundamental mode in rectangular waveguide
P = 0.25 Eo2 a b [ (ω/c)2 – (π/a)2 ]1/2
Air at STP breaks down when E = 3 MV/m (dc value)Set Eo= 3 MV/m to find maximum power flow; this will allow some safety margin since breakdown field for microwave pulseswill be higher than dc value.
Sample calculation: f = 109 Hz, a = 0.1956 m, b = 0.5 a,Pmax = 73 Megawatts
This may be increased by a factor of (3p)2 if the air in the waveguide is replaced by pressurized SF6 at a pressure of p atmospheres; i.e. with 1 atm. of SF6, Pmax = 657 MW while at a pressure of 2 atm., Pmax = 2.6 GW.
![Page 92: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/92.jpg)
92
Circular Waveguide
Fields vary radially as Bessel functions.
Fundamental mode is TE11 with fc = 0.293 c/a
Next lowest cutoff freq. is for the TM01 mode with fc = 0.383 c/a
Range for single mode operation is smaller than an octave.
![Page 93: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/93.jpg)
93
Antenna FundamentalsAn antenna may be used either for transmitting or
for receiving microwave power. When used for receiving, the antenna is characterized by an effective area,
Ae = power received /power density at the antennaWhen used for transmitting the same antenna is characterized by its gain, G, which is related to its effective area by the universal relationship
G = (4π/λ2) AeFor an aperture antenna such as a waveguide horn or a parabolic reflectorwith physical aperture area, Aphys,
Ae = K Aphys where K is an efficiency factor <1 to account for nonuniformity of the field in the aperture, Ohmic losses, in the antenna walls, etc.
![Page 94: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/94.jpg)
94
BeamwidthAntenna gain, G, is the ratio of the maximum power
density achieved in a preferred direction with the aid of the antenna compared with the power density that would beachieved with an isotropic radiator; i.e.
G = Smax / SI where SI = (Pt /Lt) 4π R2
where (Pt/Lt) is the total power fed to the antenna.Gain is achieved by concentrating the electromagnetic radiation into a beam whose width is inversely related to G We have the relationship
G = K 4π / [(∆φ)rad (∆θ)rad ] = K 41,000/ [ (∆φ)o (∆θ)o ]where for a wave propagating in the radial direction in spherical coordinates, ∆φ and ∆θ are the 3 dB beamwidths respectively in the azimuthal and polar directions and thesuperscripts indicate measurement in radians or degrees.
![Page 95: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/95.jpg)
95
Parabolic Reflector Antennas
Efficiency factor has an ideal value when only field non-uniformity in the aperture plane is taken into account of K = 55%. Empirically, K ~40%
![Page 96: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/96.jpg)
96Ideally, K = 80%. Empirically K ~ 50%.
![Page 97: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/97.jpg)
97
Microstrip Patch Antennas(Array of microstrip patches used in
ADT non-lethal weapon system)
![Page 98: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/98.jpg)
98
Radiation from Patch Edge vs,Radiation from a slot
If the slot were λ/2 long it would have an antenna gain of G = 1.64The patch edge radiating into a half-space has gain G = 4 x 1.64 = 6.5(Losses have been neglected )
![Page 99: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/99.jpg)
99
Microstrip Patch Antenna Array
Broadside array gain= 6.5 x No. patch edgesSince each patch has 2 radiating edges gainG = 6.5 N KWhere N is the no. of Patches and K is an efficiency factor
![Page 100: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/100.jpg)
100
![Page 101: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/101.jpg)
101
Microstrip Array Antenna Example
Antenna dimensions: 1.5 m x 1.5 mWavelength: 3 mmLength of patch edge: 1.5 mmSpacing between patches:1.5 mm
( in direction of radiating edges) No. of patches, N: [1.5/(3 x 10-3)]2 = 2.5 x 105
(assuming same no. of patches in each direction)Gain, G = 6.5 x N K = 6.4 x 105 or ~58 dBi
(assuming K ~ 40%)This value of gain is of the same order as gain for a parabolic reflector with the same area; viz., 0.4 x 4π A/λ2 = 1.3 x 106 or ~61 dBi
![Page 102: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/102.jpg)
102
![Page 103: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/103.jpg)
103
HPM Sources, Waveguides, Antennas and Propagation
MicrowaveSource
Power, PtFreq., f = c/λ
PowerSupply
AntennaGain, Gt
- - - - - - - - - - SRange, RPath Loss, Lp
WaveguideLoss, Lt
Effective Isotropic Radiated Power, EIRP = Pt Gt / LtPower Density at “Target”, S = (4π/λ2) ( EIRP/ Lp)
In free space, Lp = Lf = (4πR / λ )2 and S = EIRP / (4π R2)
![Page 104: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/104.jpg)
104
Power Density Delivered by ADT
If we assume that path loss is its free space value
S = EIRP / (4π R2)
Transmitter power = 100 kWEstimated antenna gain = 61 dBiEstimated feeder waveguide losses = 4 dBThen, EIRP = 5 x 1010 Watts
At a range of R = 1 km, S = 0.4 Watts/cm2
Note: To extend range new gyromonotron sourcesare being developed with power of 1 MW and higher
![Page 105: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/105.jpg)
105
![Page 106: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/106.jpg)
106
Power Density Delivered by ARLL-Band Source
Transmitter Power: 2 MWAntenna Gain: 13 dBiFeeder Wavegide Loss: assumed negligibleEIRP = 4 x 106 Watts
At a range, R = 10 meters and assuming free space propagation loss
S = EIRP / (4π R2) = 0.32 Watts/cm2
![Page 107: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/107.jpg)
107
Extra loss when Penetrating into Buildings
![Page 108: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/108.jpg)
108
Power Density from an Explosively-Driven HPM Source above a Building
Estimated Transmitter Power: 2 GW centered at 1 GHzEsimated Antenna Gain: 1Estimated Feeder Loss: 1EIRP = 2 x 109 WattsEstimated Range: R = 25 mFree Space Path Loss: Lf = (4πR / λ)2 = 1.1 x 106
Building Loss: LB(dB) = 18dB or LB = 63Total Path Loss: LP = Lf LB = 6.9 x 107
Power Density at Site of Electronics Inside Building:S = (4π / λ)2 (EIRP / LP) = 5.1 Watts / cm2
![Page 109: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/109.jpg)
109
Other Factors Contributing to Propagation Loss
We saw that path loss may be significantly increased by the reflection, refraction and absorption that occur when the microwaves pass through a wall.
Reflection can also result in multiple paths for the microwave propagation and extra loss because of multi-path interference
Obstructions near the wave path can diffract the wave and cause additional losses.
![Page 110: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/110.jpg)
110
Plane Earth Path Loss: A Case of Multi-Path Interference
![Page 111: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/111.jpg)
111
Reflection and Transmission Coefficients
![Page 112: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/112.jpg)
112
Plane Earth Path Loss
![Page 113: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/113.jpg)
113
Extra Path Loss Due to Diffraction
![Page 114: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/114.jpg)
114
Cell Phone Propagation Loss in Urban Settings
![Page 115: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/115.jpg)
115
Geometry for Evaluating Cell Phone Path Loss
![Page 116: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/116.jpg)
116
Knife Edge Diffraction
![Page 117: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/117.jpg)
117
Attenuation by Knife Edge DiffractionNote that there is attenuation even when ray path is above knife edge (ν < 0)
![Page 118: High Power Microwave Technology and Effects](https://reader031.vdocuments.us/reader031/viewer/2022020702/61fb214d2e268c58cd5a7fb5/html5/thumbnails/118.jpg)
118
The Bottom Line on Propagation Loss
Make sure you are using an appropriatephysical model of the propagation path!
Dependence of loss on range, frequency,antenna height and target height are stronglyinfluenced by the physical processes along the propagation path (reflection, refraction, absorption, diffraction, multipath interference)