The Vertical Machining Center Hi-MOLD750/5A designed by Hyundai WIA with years of expertise and the latest technology, is made to meet the intense performance requirements of the mold industry.
Technical Leader
5 axis mold processing Vertical Machining Center
Hi-MOLD750/5A● Double column structure
● Highly accurate main spindle with ultra precise angular contact bearings
● High speed built-in main spindle(15,000rpm) for highest quality of molds
● Built-in 5-axis table fulfills various processing needs
● Hyundai WIA mold package for optimal processing of mold parts
5-AxisVertical Machining CenterWithin the travel system, large linear roller guides provide superb acc/deceleration speed and reduce non-cutting time. And also, each axis' ball screw is linked with highly reliable Digital Servo Motor to enhance accuracy.
04+
05
H
i-M
OLD
750/
5AVe
rtic
al M
achi
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
Hi-MOLD750/5Amm(in)
kg(lb)
-
r/min
kW(HP)
EA
mm(in)
m/min(ipm)
Ø630×500 (24.8″×19.7″)
500 (1,102)
HSK-A63
15,000
25/22 (33/29)
30
650/765/510 (25.6″/30.1″/20″)
50/50/50 (1,968/1,968/1,968)
Table Size
Max. Load Capacity
Spindle Taper
Spindle Speed
Spindle Output
No. of Tools
Travel(X/Y/Z)
Rapid Traverse Rate
01 Basic FeaturesHigh Speed & Productivity 5-Axis Vertical Machining Center Hi-MOLD
750/5A
Super rigid X-Axis SlidewayX-axis slideway is attached on the column's upper surface to minimize sag.Hyundai WIA's double column construction is a superior design for the machining of high quality products.
Built-in SpindleA maximum spindle speed of 15,000rpm is possible due to the installation of ultra precision Angular Ball Bearings.
DDM Tilting Rotary TableThe Direct Drive Motor(DDM) provides superb productivity and quality of work compared to the previous gear drive method, increasing accuracy as well as speed.
02
04
03
01
Roller type LM GuidewayRigidity and speed is improved by the use of Roller type LM Guideway. These highly responsive and accurate guideways contribute to the Hi-MOLD750/5A's ability to meet the performance demands of mold machining.
Roller Type LM Guide
06+
07
H
i-M
OLD
750/
5AVe
rtic
al M
achi
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
Basic Structure
01
03
04
02
◉ Rapid Traverse Rate (X/Y/Z axis) : 50/50/50 m/min (1,968/1,968/1,968 ipm) (A/C axis) : 50/60 rpm
◉ Travel (X/Y/Z/A/C axis) : 650/765/510 mm (25.6″/30.1″/20″) / +30°~-120°/360°
High Precision & High Speed Vertical Machining Center
02 High Precision SpindleLong Lasting High Accuracy & Excellent PerformanceVertical Machining CenterHi-MOLD
750/5A
08+
09
H
i-M
OLD
750/
5AVe
rtic
al M
achi
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
Spindle
Built-in SpindleThe built-in spindle is designed to minimize vibration and heat, as well as deliver rapid acc/deceleration. Stable precision is maintained even under high speed and heavy duty operations.
Spindle CoolingThe spindle cool ing system minimizes thermal displacement which can happen during lengthy machining operations, and offers continued accuracy based on the thermal stability.
Through Spindle CoolantThrough Spindle Coolant is exceedingly useful when drilling deep holes. It helps increase the lifetime of the tool, while decreasing cycle time.
HSK Tool Holder (HSK-A63)The HSK spindle offers the fastest material removal rates, highest accuracy and rigidity.
It guarantees stability at high speed which is excellent for mold machining.
20 bar / 30 bar(290 psi / 435 psi)
15,000rpm Built-in
Spindle Speed (r/min)
Power (kW[HP])
25kW[33.5HP] (S2 15min)
22kW[29.5HP] (cont.)
Low winding
25[33.5]
167[123]
118[87]
95[70]
48[64.4]42[56.3]
22[29.5]
18.5[24.8]
15[20]
0 1,500 3,500 5,000 12,500 15,0001,060
High winding
Torque (N∙m[lbf∙ft])
167N∙m[123lbf∙ft](S3 15%)
118N∙m[87lbf∙ft] (S2 15min)
95N∙m[70lbf∙ft] (cont.)
03 Magazine & TableLong Lasting High Accuracy & Excellent PerformanceVertical Machining CenterHi-MOLD
750/5A
Magazine & ATCThe tool magazine and machining area are completely separated by a shutter so that chip, coolant and dust particles can be blocked. This helps to maintain high precision and cleanliness. Also, the 30-pocket tool magazine is provided for increased machining flexibility and user convenience.
◉ Number of Tools : 30 EA
◉ Tool Change Time (T-T/C-C) : 1.2/4.5 sec
◉ Tool Shank : HSK-A63 ◉ Max. Length of Tools : 300 mm (11.8″)
◉ Max. Weight of Tools : 8 kg (17.6 lb) ◉ Max. Diameter of Tools/ (W.T/W.O) : Ø90/Ø150 (Ø3.5″/Ø5.9″)
Magazine & Table
Direct Drive Motor (DDM) Tilting Rotary TableDirect drive motor DDM provides superb productivity and quality of work and increasing accuracy as well as speed.
10+
11
H
i-M
OLD
750/
5AVe
rtic
al M
achi
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
◉ Size : Ø630×500 mm (Ø24.8″×19.6″)
◉ Max. Load Capacity : 500 kg (1,102 lb)
◉ Slope Angle : +30˚ ~ -120˚◉ Rotation Angle : 360˚◉ Min. Indexing Angle : 0.001˚
04 Smart SystemSoftware for Smart Operating and MachiningHi-MOLD
750/5A
Faster processing and enhanced accuracy in are possiblethrough the HYUNDAI WIA Smart System. The user friendly software and equipment monitoring of the Smart System maximizes productivity.
HW-eDNCHYUNDAI WIA ethernet Direct Numerical Control
This software allows transmition of NC data between PC and a machine's CNC. The processing programs can be managed on the PC through the ethernet or serial communication.
HW-MMSHYUNDAI WIAMachine Monitoring System
This software is for remote control monitoring of equipment status (mobile, PC.) It checks and manages the state of multiple machines and the progress of processing on a real time basis.
Hi-MOLD750/5A
Intelligent Machining
Machine Monitoring
High Precision
High Productivity Energy Savin
g
HW-TM | HW-MCS | HW-A
FC
HW-TOM | HW-WCM
HW-ESS
User Friendly
HW-MMSHW-TDC | HW
-WARM
UP
HYUNDAI WIA Smart System for Vertical Machining Center
User Convenience
HW-eDNC
HW-MCG
12+
13
H
i-M
OLD
750/
5AVe
rtic
al M
achi
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
HYUNDAI WIA Smart System
HW-TDCHYUNDAI WIA Thermal Displacement Compensation
Software that measures the changes in the external environment as well as heat emission during processing to help reduce thermal displacement.
HW-ESSHYUNDAI WIAEnergy Saving System
An environmental friendly software that reduces the unnecessarily wasted standby power waiting for an operation.
(FANUC)
HW-TMHYUNDAI WIATool Monitoring
A tool monitoring software which analyzes the load of the spindle motor to determine and monitor possible damage of tools.
(FANUC)
HW-MCGHYUNDAI WIAMachine Guidance
Software that offers operation, maintenance, management monitoring and various user friendly features.
(FANUC)
HW-WARMUPHYUNDAI WIAWARMing Up
Warm-up software that measures main spindle halt and offers system warm-up time automatically.
HW-TOMHYUNDAI WIATool Offset Measurement
User friendly GUI software that indicates tool length, diameter, and damage (H/W excluded)
(FANUC)
HW-WCMHYUNDAI WIA Work Coordinate Measurement
User-friendly GUI software that measures work coordinates (H/W excluded )
(FANUC)
HW-AFCHYUNDAI WIAAdaptive Feed Control
Software that controls the feed automatically to maintain a certain working load to extend tool life as well as productivity.
(FANUC)
HW-MCSHYUNDAI WIAMachining Condition Selection
Software that automatically sets cutting and feeding parameters according to the machining types (speed, degree, quality)
(FANUC)
05 Mold PackagePowerful Mold Package, HYUNDAI-WIA Mold All in OneHi-MOLD
750/5A
HWM ALL-IN-ONETo enhance mold machining, the " HWM ALL-IN-ONE" is provided as a standard feature for Hi-MOLD 750/5A.
This ensures accurate and high quality surface finishing and contouring.
Mold Package Specification
1 Package 2 Package 3 Package 4 Package (FANUC) (FANUC) (FANUC) (FANUC)
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
HWM ALL IN ONE
AICCⅡ Package
S/W : HW-MCS, HW-AFC
Auto Power Off
Spindle Heat Distortion Compensation Device
Cutting Air Blow
Auto Tool Measuring Device
Data Server 1GB
200 block
600 block
1,000 block
1 Package : Standard 2, 3, 4 Package : Option
Thermal Displacement Compensation DeviceThermal displacement of the spindle is minimized by the use of cooling techniques. This provides high accuracy when machining at high speed.
◉ High Speed Contouring Control (AICCⅡ : 200 Block)
Recognizes NC Data prior to the current processing phase
◉ Optimal S/W (FANUC 31i-A Model) HW-MCS (Selectable Process Conditions) HW-AFC (Adapive Feed Control)
◉ Automatic Power Off Device
◉ Auto Tool Measuring Device Detects and sets tool length, and attrition (Graphic User Interface included)
◉ Main Spindle Cooling Device (8-channel) Maintains temperature on the main spindle from thermal displacement. (heat sensor)
◉ Cutting Air Blow Cutting air blow is provided for mold machining.
Mold Package
14+
15
H
i-M
OLD
750/
5AVe
rtic
al M
achi
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
Interface
T.D.C With PT100 Sensor
T.D.C With DISP. SensorPower supply (Opt. Filter Choke)
Compensation of heat displacement (control of transmission axis)
Cooling system (Opt, control of setting temperature)
Lubrication system (Oil-Air)
User ConvenienceVarious Devices for User Convenience06Hi-MOLD
750/5A
Linear ScaleLinear scales can be applied when highly accurate positioning is required.
Precision DeviceMeasuring Device
Touch SensorWorkpiece coordinate values can be set automatically using the optional spindle probe.
Mist CollectorMist Collector reduces the amount of smoke and oil mist in the air. This helps build a safe and comfortable working environment and improve durability.
Environment Device
Oil SkimmerAn oil skimmer can increase coolant and tool life by removing tramp oil contaminants.
Chip Disposal Process
•Hinge Belt Type : Highly efficient when disposing a lot of chips. Capable of handling stringy chips. (Long Chip)
•Scraper Type : Convenient for shortly cut chips.. (Short Chip)•Drum Filter Type : Advantageous in precision, as the chips do not flow in to the coolant nozzle. (AL Chip)
Chip ConveyorTimely and effective disposal of chips will enhance productivity as well as the working environment.
Optional
16+
17
H
i-M
OLD
750/
5AVe
rtic
al M
achi
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
Chip Conveyor Front (Right)
Std. Coolant (Nozzle)
Bed Flushing Coolant
Through Spindle Coolant
(20/30bar [290/435psi])
Shower Coolant
Gun Coolant
Standard
Standard
Option
Option
Standard
Coolant Unit
Hi-MOLD750/5A●☆☆
●○○●○●●○○○○○○○○○☆○○●○
☆☆○○●☆○●☆
○○○○☆
○○-☆○☆○○
●
○
☆--☆
Tool BoxCustomized ColorCAD & CAM SoftwareElectric DeviceCall LightCall LightCall Light & BuzzerWork LightElectric Cabinet LightDoor Inter-LockRemote MPG3 Axis MPGSpindle Load MeterSpindle Speed MeterWork CounterTotal CounterTool Counter
Multi Tool Counter
Electric Circuit BreakerAVR (Auto Voltage Regulator)TransformerFlash Memory CardAuto Power OffBack up Module for Black outMeasuring Device
Air Zero
Work Measuring DeviceTLM(Marposs/Renishaw/Bloom)Tool Broken Detective DeviceLinear ScaleRotary ScaleCoolant Level Sensor (Only for Chip Conveyor)EnvironmentAir ConditionerDehumidifierOil Mist CollectorOil Skimmer (Only for Chip Conveyor)MQL (Minimal Quantity Lubrication)Fixture & Automation
Auto Door
Auto Shutter (Only for Automatic System)Sub Operation PannelExternal M code 4eaAutomation Interface
I/O Extension (In & Out)
Hyd. Device
Std. Hyd. Unit
Center Type Hyd. Supply Unit (Upper)
Hyd. Unit for Fixture
Need for Munsel No.
1 Color : ■3 Color : ■■■3 Color : ■■■B
Built-inBuilt-inDigitalDigitalDigital6ea9ea
70kVA
TACOSMC
TouchLaser
X/Y/Z AxisA/C Axis
Std.High Speed
16Contact32Contact
70bar (1,015 psi) / 60ℓ(15.8 gal)
2X3(6port)
50bar70bar100barCustomized
Standard & Optional
15,000rpm(25/22kW)Spindle Cooling SystemATC
ATC Extension
Tool Shank Type
U-Center
Stud Bolt Collet Change
Table & ColumnAPCTap Type TableT-Slot TableNC Rotary Table(Gear)NC Rotary Table(DDM)HIgh ColumnCoolant SystemStd. Coolant (Nozzle)Bed Flushing Coolant
Through Spindle Coolant*
Top Cover Shower CoolantGun CoolantSide Oil Hole CoolantAir GunCutting Air BlowTool Measuring Air Blow (Only for TLM)Air Blow for AutomationThru MQL Device (Without MQL)Coolant ChillerPower Coolant System (For Automation)Chip DisposalCoolant TankCabin Screw Chip ConveyorChip Conveyor Hinge(Tank Position/Chip Disposal) ScraperSpecial Chip Conveyor (Drum Filter)
Chip Wagon
Safety DeviceTotal Splash GuardS/WMachine guidance (HW-MCG) : FANUCTool Monitoring (HW-TM) : FANUCDNC Software (HW-eDNC)Spindle Heat Distortion Compensation (HW-TDC)Spindle Warm up Function (HW-WARMUP)Energy Saving System (HW-ESS) : FANUCMachine Monitoring System (HW-MMS)Tool Offset Measurement (HW-TOM) : FANUCWork Coordinate Measurement (HW-WCM) : FANUCMachining Condition Selection (HW-MCS) : FANUCAdaptive Feed Control (HW-AFC) : FANUC
Bulit-in
3040HSK A63BT40D'andrea45°60°90°
Rotary Turn
20bar (290 psi)30bar (435 psi),20ℓ(5.3 gal)70bar (1,015 psi), 15ℓ(4 gal)
600ℓ(158.5 gal)
Right (Right)
Standard(180ℓ[47.5 gal])Swing(200ℓ[52.8 gal])Large Swing(290ℓ[76.6 gal])Large Size(330ℓ[87.2 gal])Customized
Spindle ETC
● : Standard ○ : Option ☆ : Prior Consultation - : Non Applicable
Hi-MOLD750/5A●●
●☆●☆☆☆--
-☆●○●-
●●○
○
○
●○○-●●○☆☆☆☆
●-
○
☆
○
○
○
○
☆
●
☆○○●●☆☆○○●●
Through Spindle Coolant* : Please check the filter types with sales representative. Specifications are subject to change without notice for improvement.
SPECIFICATIONS
unit : mm(in)External Dimensions
610(24)
610(24)
375
(14.
7)23
30 (9
1.7)38
65 (1
52.1
)
4235 (166.7)
2705
(108
.2)
1235 (48.6)2800 (110.2)
1565 (61.6)
2705
(108
.2)
3000 (118.1)
3865
(152
.1)
1232.7 (48.5) 1565 (61.6) 1475.3 (58)
1022
(40.
2)
18+
19
H
i-M
OLD
750/
5AVe
rtic
al M
achi
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
SPECIFICATIONS
SPECIFICATIONS
Ø630 (Ø24.8)
Ø630 (
Ø24.8)
80 (3.1
)
250
(9.8
)
500
(19.
7)
50 (1.9
)50 (1.9
)10
0(3
.9)
100
(3.9
)10
0(3
.9)
100
(3.9
)
250
(9.8
)
32(1
.2)
32 (1.2)
20 (0.8
)12 (0.5
)
unit : mm(in)
unit : mm(in)
Table Dimensions
Tool Shank
HSK-A63
20(0.79)
6.3(0.25)
13(0.51)
14.7(0.58)
18(0.71)
18(0
.71)
12.5
4 H
8
20(0
.79)
16(0
.63)
8(0.32)
8 (0.32)
11.42(0.45)
20(0.79)
15(0.59)
16(0.63)
4 (0.16)9.5
(0.37)
60°
60°
30°
Ø34
Ø (1
.34)
Ø30
(Ø1.
18)
Ø25
.5(Ø
1.0)
Ø23
(Ø0.
9)Ø
21(Ø
0.83
)
+0.0
07+0
.005
Ø29
.05
(Ø1.
144)+0
.005
+0.0
03Ø
46.5
3(Ø
1.83
)+0.0
07+0
.003
Ø48
(Ø1.
89)
+0.0
11+0
.007
Ø40
(Ø1.
57)
Ø63
(Ø2.
48)
Ø10(0.39)
26.5(1.04)
20(0.79)
26.5(1.04)
Specifications are subject to change without notice for improvement.
Table Size
Maximum Load Capacity
Table Change Time
Change Method
Table Driving Method
Spindle Taper
Spindle RPM
Spindle Power Output (Max./Cont.)
Spindle Torque (Max./Cont.)
Spindle Driving Method
Travel (X/Y/Z) X/Y/Z Axis
A/C Axis
Distance from Table Surface to SP
Distance from Column to SP. center
Rapid Traverse Rate X/Y/Z Axis
A/C Axis
Slide Type
Number of Tools
Tool Shank
Max. Tool Dia.(W/T Adjacent Tool)
Max. Tool Length
Max. Tool Weight
Tool Selection Method
Tool Change Time T-T
C-C
Coolant Tank
Lubricating Tank
Hydraulic Tank
Air Consumption (0.5MPa)
Electric Power Supply
Thickness of Power Cable
Voltage
Floor Space (L×W)
Height
Weight
Controller
TAblE
FEED
TANkCApACITY
SpINDlE
ATC
MACHINE
NC
poWErSUpplY
mm(in)
kg(lb)
sec
-
-
-
r/min
kW(HP)
N.m(lbf.ft)
-
mm(in)
deg
mm(in)
mm(in)
m/min(ipm)
r/min
-
ea
-
mm(in)
mm(in)
kg(lb)
-
sec
sec
ℓ(gal)
ℓ(gal)
ℓ(gal)
ℓ/min
KVA
Sq
V/Hz
mm(in)
mm(in)
kg(lb)
-
ITEM Hi-MOLD750/5A
Ø630x500 (Ø24.8″x19.7″)
500 (1,102)
-
-
-
HSK-A63
15,000
25/22 (33/29)
167/95 (121.7/70)
BUILT-IN
650(25.6″)/765(30.1″) (+350ATC)/510(20″)
150°(+30°~-120°)/360°
160~730 (6.3″~28.7″)
-
50/50/50 (1,968/1,968/1,968)
50/60(DDM), 40/50(Gear)
ROLLER GUIDE
30
HSK-A63
Ø90/Ø150 (3.5″/6″)
300 (11.8″)
8 (17.6)
Fixed Adress
1.2
4.5
600 (158.5)
0.7 (0.2)
60 (15.8)
500
63
Over 50
220/60 (200/50)
3,380x4,205 (133″x165.5″)
3,685 (145″)
18,000 (39,683)
FANUC 31i-A5
Specifications [ ] : Option
20+
21
H
i-M
OLD
750/
5AVe
rtic
al M
achi
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
SPECIFICATIONS
FANUC 31i-A5Axis control / Display unitControlled axisSimultaneous controllable axis
Least input increment
Least command increment
Inch / Metric conversionInterlockMachine lockStored stroke check 1Mirror imageFollow-upServo off
Backlash compensation
Position switchStored pitch error compensationLCD/MDIoperationDNC operation by the memory cardProgram restartProgram check functionSingle blockFeed functionsManual jog feedManual handle feed-rateFeedrate overrideJog feedRapid traverse overrideOverride cancelRapid traverse bell-shaped acceleration/decelerationAuto corner overrideprogram input & Interpolation functions
Interpolation Function
Exact stop mode/Exact stopDwellHelical interpolationThreading/synchronous feedManual reference point returnReference point returnReference point return check2nd Reference point returnProgram stop/endTape codeOptional block skipMax. programmable dimensionsProgram number / Sequence numberAbsolute/incremental commandPlane selectionWork coordinate presetManual absoluteProgrammable data inputSub program callCustom macroCircular interpolationCanned cycleOptional chamfering/corner RSkip functionAutomatic coordinate system settingCoordinate system rotationProgrammable mirror imageBidirectional pitch error compensationAI contour control(AICC) II
5 axis (X, Y, Z, A, C)5 axis (X, Y, Z, A, C)X, Y, Zaxis : 0.001 mm (0.0001″)A, C axis : 0.001°X, Y, Zaxis : 0.001 mm (0.0001″)A, C axis : 0.001°G20 / G21Each axis / All axisAll axis
+/- 0~9999 pulse (rapid traverse & cutting feed)
10.4″ color LCD
Dry run, program check
Rapid, Jog, handlex1, x10, x1000~200% (10% Unit)0~5,000mm/min (197ipm)F1, F25%, F50%, F100%
Positioning/Linear/Circular (G00/G01/G02/G03)G61 / G09G04, 0~9999.9999 sec
G28G27G30M00, M01 / M02, M30EIA / ISO Automatic recognition1 ea+/- 9999.9999” (+/- 8 digits)O4 / N8 digitG90 / G91G17, G18, G19G52~G59“On” fixedG1010 Step
G02, G03G73, G74, G76, G80 ~ G89
G31
G68, G69G50.1, G51.1
200 Block
Sub / Spindle functionsMiscellaneous functionSpindle speed commandSpindle speed overrideSpindle orientationRigid tappingTool functions / Tool compensationTool functionCutter compensation CTool length compensationTool length measurementTool offset pairsTool life managementData input / output & Editing functionsInput/output interfaceEmbeded EthernetPart program storage lengthRegistered programsMemory lockBack ground editingExtended part program editingSetting, display, diagnosisSelf-diagnosis functionHistory displayRun hour/Parts count displayActual cutting feedrate displayGraphic displaySpindle/Servo setting screenMulti-language displayScreen SaverAuto Data Backup
option
Additional work coordinate system
Additional custom micro changeWork coordinate CommandWork coordinate InterpolationHelical interpolationSingle direction positioningScalingManual handle interuptAdditional optional Blockskip
AI contour control(AICC) 1
AI contour control(AICC) 2
AI contour control(AICC) 3
AI contour control(AICC) 4
Tool offset numberProgram registration numberPart program storage lengthData serverHigh speed ethernetManual Guide iDynamic graphic displayTool load monitoring function
Figures in inch are converted from metric values.Design and specifications are subject to change without notice.
M3 digitS5 digits, binary output50% ~ 120% (10% Unit)
Max. T8 digitsG40~G42G43, G44, G49Z axis INPUT C64 pair
RS232C, Memory card100 Mbps128 Kbyte (320m)250 EA
Copy, move, change of NC program
Alarm & operator message
Selection of 5 optional languageScreen saver
G54.1 P1~P48 (48 pair)G54.1 P1~P300 (300 pair)#100 ~ #199, #500 ~ #999G15, G16G12.1, G13.1G07.1G60
9 EA200 Block/Select processing conditions/Auto power off200 Block/Select processing conditions/data server/Auto power off600 Block/Select processing conditions/data server/Auto power off1000 Block/Select processing conditions/data server/Auto power off200 pairMax. 1000 EA *(Note 1)256Kbyte(640m) ~ 2Mbyte(5120m)1GB100 MbpsInteractive automatic program
HWTM (Mounted)
CONTROLLER
*Note 1) The program registration number may vary depending on the part program storage capacity.
22+
23
H
i-M
OLD
750/
5AVe
rtic
al M
achi
ning
Cen
ter
HYU
ND
AI W
IAM
ACH
INE
TOO
L
GLOBAL NETWORK
Changwon Technical Center / R&D Center / Factory153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do, Korea (Zip Code : 51533)TEL : +82 55 280 9114 FAX : +82 55 282 9680
Uiwang Technical Center / R&D Center37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do, Korea (Zip Code : 16082)TEL : +82 31 596 8209 Fax : +82 55 210 9804
HeADqUARTeR
OVeRSeAS OFFICeSHYUNDAI WIAMachine Tools America 265, Spring Lake Drive, Itasca, IL, 60143
TEL : +1 201 489 2887 FAX : +1 201 489 2723
Jiangsu HYUNDAI WIANo.6 Fenghuang Road, Fenghuang Town, Zhangjjagang City, Jiangsu province, China
TEL : +86 512 5672 6808FAX : +86 512 5671 6960
Chengdu OfficeNO.508 Room, B Block, AFC Plaza, NO.88 Jiaozi Road, High-tech Zone, Chengdu, China 610041
TEL : +86 28 8665 5550FAX : +86 28 8666 2985
HYUNDAI WIAMachine Tools europe Kaiserleipromenade 5, D-63067 Offenbach, Germany
TEL : +49 69271 472 701FAX : +49 69271 472 719
Hyundai WIA Machine Tools ChinaShanghai Office1-3F, Bldg6, No.1535 Hongmei Road, Xuhui District, Shanghai, China, 200233
TEL : +86 21 6427 9885FAX : +86 21 3431 0376
Wuhan Office Room 302, B tower, Donghe Center, Dongfeng three road, Zhuankou, Wuhan, Hubei, China 430056
TEL : +86 27 5956 3256~7FAX : +86 27 5952 3258
Raunheim Service CenterRaunheim R&D CenterKelsterbacher Strasse 51, 65479 Raunheim, Germany
TEL : +49 6142 9256 0 FAX : +49 6142 834 100
Beijing Office13 Floor Building B Zhonghangji square, No.15 Ronghua South Road, Yizhuang Economic and Technological Development Zone District, Beijing, China 100176
TEL : +86 10 8453 9850~2FAX : +86 10 8453 9853
qingdao OfficeRoom 1207, Caifu Building, 182-6 Haier Middle Road, Qingdao, China 266061
TEL : +86 532 8667 9333~5FAX : +86 532 8667 9338
Inida Office#4/169, Rajiv Gandhi Salai, (OMR), Kandanchavadi, Chennai-600 096, Tamilnadu, IndiaTEL: +91-44-3290-1719
Guangzhou OfficeRoom 311, Unit 1-3, Poly Tal Tu Wun, Hanxi Avenue, Panyu District, Guangzhou, China 511400
TEL : +86 20 8550 6595~6 FAX : +86 20 8550 6597
Shenyang OfficeRoom 1304, NO.53 Beizhan Road, Shenhe District, Shenyang, China 110013
TEL : +86 24 3228 6640FAX : +86 24 3228 6642