Download - Hayward Filters
The pool professional’s choice for exceptional filtration in a spherical design. This Pro Series Plus filter incorporates many of the advanced features found in Hayward’s Pro Series sidemount filter, delivering high-rate performance for the most demanding installations.
Thanks to its spherical design, the Pro Series Plus evenly distributes the high pressure and stress that are common with solar heating systems, spas, fountains and in-floor cleaning systems. Its impressive underdrain assembly uses 3,800 slots on 10 self-cleaning laterals that ensure totally balanced flow and backwashing. The overall result is a minimal-maintenance filter with greater strength and longer life.
Pro Series Plus SPHERICAL DESIGN SIDE-MOUNT
SAND FILTERS
Powerful performance.Spherical design.
FI
LT
ER
S
Total System: Pumps I Filters I Heating I Cleaners I Sanitization I Automation I Lighting I Safety I White Goods
Filter Performance Data
Model Number
Effective Filtration Rate
Design Flow Rate*
Maximum Working Pressure
Turnover (in gallons)Sand
Required8 hours 10 hours
S311SX4.95 ft.2
0.46 m.2
99 GPM375 LPM
50 psi3.45 bar
47,520 gal180 kl
59,400 gal.225 kl
350 lbs.159 kg
S360SX6.50 ft.2
0.60 m2
130 GPM492 LPM
50 psi6.45 bar
62,000 gal.236 kl
78,000 gal295 kl
700 lbs.318 kg
Hayward is a registered trademark and Vari-Flo is a trademark of Hayward Pool Products, Inc.© 2011 Hayward Pool Products, Inc.
Pro Series Plus Spherical Design Side-Mount Sand Filters SpecificationsFilter type High-rate sand: No. 20 silica sand (.45 mm – .55 mm)
Filter tank Spherical, Molded Polymeric
Underdrain 360° self-cleaning slotted laterals, precision installed in ball-joint assembly
Control valve 2”, 7-Position, Vari-FloTM ; 2”, 2-Position Slide Valve; or 11/2” SKT x 2”SLIP Connectors for Multiple (Tandem) Filter Installations
Support Base Injection-Molded ABS
Performance Range
99 to 130 GPM (375 to 492 LPM)
DimensionsS311SX – 31” W x 385/8” H ( 79 cm x 98 cm)S360SX – 36” W x 46” H ( 91 cm x 117 cm)
LITPROPL11
620 Div is ion Street I E l izabeth, NJ 07201
To take a closer look at Pro Series Plus Filters or other Hayward products, go towww.haywardpool.com or call 1-888-HAYWARD
Above dimensions are for filter only. Add 14” (36 cm) for multi-port valve, add 7” (8 cm) for slide valve.
*Based upon 20 GPM per ft.² (815 LPM per m²). Maximum allowable NSF rating.
Your Choice of Control ValvesSelect from a wide array of valve optionsfor customized control of your filtrationsystem, including Hayward’s 2”, 2-position slide valve.
Patented Service-Ease DesignUnique folding ball
joint design allows
lateral assembly to be
easily accessed for
simple servicing.
Optional Valve and Coupling Selections for plumbing ease and versatility.
Manual Air Relief for easy, manual release of air from system.
Durable Flanged Inspection/Access Cover provides convenientaccess to top of filter.
Integral Top Diffuser ensures even distribution of water over the top of the sand media bed. All internal piping is 2” to give smooth,free-flowing performance.
Automatic Air Relief purges any trapped air during operation of the filter system.
Efficient, Multilateral Underdrain Assembly with 360 slotted, self-cleaning laterals, gives totally balanced flow and backwashing.
Totally Corrosion-Proof Base is rugged and attractively styled to provide strong, stable support.
Integral Molded Drain Plug for easy draining of tank, without the loss of sand.
Unitized, Corrosion-Proof Spherical Filter Tank is molded of rugged, color-fast polymeric material for maximum strength.
Pro Series
FI
LT
ER
S
Hayward Pro Series high-rate sand filters offer the very latest in pool filter technology with smooth, efficient flow and totally balanced backwashing.
Pro Series sand filters feature unitized construction of corrosion-proof, polymeric material and self-cleaning 360° slotted laterals. A versatile seven-position control valve offers both easy operation and maximum efficiency.
For crystal clear, sparkling water with minimum care, Pro Series filters set a new standard for performance, value and dependability.
Total System: Pumps I Filters I Heating I Cleaners I Sanitization I Automation I Lighting I Safety I White Goods
TOP-MOUNT SAND FILTERS
SPECIFICATIONS – PRO SERIES HIGH-RATE SAND FILTERSFilter Type High-Rate Sand: No. ½ Silica Sand (.45 mm - .55mm)
Filter Tank Molded Polymeric
Underdrain 360º Self-Cleaning Slotted Laterals, Precision-Installed in Ball Joint Assembly
Control Valve 1 ½” or 2” 7-Position, Top-Mount Vari-Flo™ with Lever-Action Handle
Valve Fastening Flange Clamp Design
Support Base Injection-Molded Polymer
Performance Range 30 to 120 GPM, 114 to 454 LPM
Dimensions
S180T – 18 ½”W x 35”H (470 mm x 889 mm)S210T – 20 ½”W x 38”H (521 mm x 965 mm)S220T – 22 ½”W x 41”H (572 mm x 1041 mm)S244T – 24 ½”W x 42”H (622 mm x 1067 mm)S270T – 27”W x 43”H (675 mm x 1075 mm)S270T2 – 27”W x 43”H (675 mm x 1075 mm)S310T2 – 30 ½”W x 48”H (775 mm x 1219 mm)S360T2 – 35 ½”W x 53”H (895 mm x 1346 mm)
Patented Service-Ease Designwith unique folding ball joint design allows lateral assembly to be easily accessed for simple servicing.
Vari-Flo™ 7-Position Control Valvewith easy-to-use lever-action handle lets you “dial” any of seven valve/filter functions.
LITPROTM11
PERFORMANCE DATA
MODEL NUMBER
EFFECTIVE FILTRATION AREA
DESIGN FLOW RATE*
TURNOVER SAND REQUIREDGALLONS KILOLITERS
ft.² m² GPM LPM 8 hrs. 10 hrs. 8 hrs. 10 hrs. lbs. kg
S180T 1.75 0.163 35 132 16,800 21,000 63.59 79.48 150 68S210T 2.20 0.205 44 167 21,120 26,400 79.94 99.92 200 91S220T 2.64 0.246 52 197 24,960 31,200 94.47 118.09 250 114
S244T 3.14 0.292 62 235 29,760 37,200 112.64 140.80 300 136
S270T 3.70 0.345 74 285 35,520 44,400 134.49 168.07 350 159S270T2 3.70 0.345 74 285 35,520 44,400 134.49 168.07 350 159S310T2 4.91 0.457 98 371 47,040 58,800 178.05 222.56 500 227S360T2 7.06 0.660 141 535 67,680 84,600 256.20 320.25 700 318
Integral Molded Drain Plug for easy draining of tank, without the loss of sand.
*Based upon 20 GPM per ft.² (814 LPM per m²). Maximum allowable NSF rating.
Hayward is a registered trademark and Vari-Flo is a trademark of Hayward Industries, Inc. ©2011 Hayward Industries, Inc.
Flange Clamp Design allows 360° rotation of valve to simplify plumbing.
Unitized, Corrosion-Proof Filter Tank molded of tough, durable, colorfast polymeric material for dependable, all-weather performance with only minimal care.
Totally Corrosion-Proof Base is rugged and attractively styled to provide strong, stable support.
Integral Top Diffuser ensures even distribution of water over the top of the sand media bed. Full-size internal piping gives smooth, free-flowing performance.
Efficient, Multilateral Underdrain Assembly with precision-engineered, self-cleaning 360° slotted laterals give totally balanced flow and backwashing.
620 Division Street I El izabeth, NJ 07201
To take a closer look at Hayward Filters, go to www.haywardpool.com or call 1-888-HAYWARD.
Pro™ SeriesSIDE-MOUNT SAND FILTERS
Minimal maintenance for added convenience.Hayward Pro Series sand filters deliver crystal clear water through advanced pool filter technology for pools of all types and sizes. And, since this sand filter requires minimal care, users will appreciate its added convenience.
The durable housing is molded of corrosion-proof polymeric materials. Additional features include an advanced, self-cleaning lateral system for smooth, efficient flow and totally balanced backwashing. Plus, with a Hayward 6-position Vari-Flo™ control valve, you can quickly dial any of the valve/filter functions for easier operation and maximum efficiency.
Total System: Pumps I Filters I Heating I Cleaners I Sanitization I Automation I Lighting I Safety
FI
LT
ER
S
Vari-Flo 6-Position Control ValveThe easy-to-use lever action lets you “dial” any of six valve/filter functions.
LITPROSM10
SPECIFICATIONS – PRO SERIES SIDE-MOUNT SAND FILTERS
FILTER TYPE High-Rate Sand: No. ½ Silica Sand (0.45 mm – 0.55 mm)
FILTER TANK Molded Polymeric
UNDERDRAIN 360˚ Slotted Self-Cleaning Slotted Laterals, Precision-Installed in Ball Joint Assembly
CONTROL VALVE 1½" or 2", 6-Position Vari-Flo or 2", 2-Position Slide Valve. May also be plumbed singularly or in series with quick disconnect union couplings (less valve).
SUPPORT BASE Injection-Molded Polymer
PERFORMANCE RANGE 30 to 120 GPM, 114 to 454 LPM
DIMENSIONSS210S – 20½" W x 32⅛" H (52 cm x 82 cm)S244S – 24½" W x 36" H (62 cm x 91 cm)S310S – 30½" W x 40" H (78 cm x 104 cm)
Integral Molded Drain Plug for easy draining of tank, without the loss of sand.
Patented Service-Ease Designwith unique folding
ball joint design allows
lateral assembly to
be easily accessed
for simple servicing.
PERFORMANCE DATA
MODEL NUMBER
EFFECTIVE FILTRATION
AREAVALVE DESIGN
FLOW RATE*
TURNOVERSAND
REQUIREDGALLONS KILOLITERS
ft.² m² GPM LPM 8 hrs. 10 hrs. 8 hrs. 10 hrs. lbs. kg
S210S
S244S
S244SV
S244SLV
S310S
2.20
3.14
3.14
3.14
4.91
0.20
0.30
0.30
0.30
0.46
1-½” Vari-Flo
1-½” Vari-Flo
2” Slide Valve
Not Included
Not Included
44
62
62
62
98
167
235
235
235
371
21,120
29,760
29,760
29,760
47,040
26,400
37,200
37,200
37,200
58,800
80
113
113
113
178
100
141
141
141
223
200
300
300
300
500
91
136
136
136
227
Hayward is a registered trademarks and Pro and Vari-Flo are trademarks of Hayward Industries, Inc. ©2010 Hayward Industries, Inc.
620 Division Street I Elizabeth, NJ 07201
To take a closer look at Hayward Filters, go to www.haywardnet.com or call 1-888-HAYWARD
Hayward 6-Position Vari-Flo™ Control Valve with easy-to-use lever-action handle lets you dial any of the six valve/ filter functions. Integral sight glass lets you see when backwash cycle is completed.
Integral Top Diffuser ensures even distribution of water over the top of the sand media bed. All internal piping is 2” for smooth, free-flowing performance.
Totally Corrosion-Proof Base is rugged and attractively styled to provide strong, stable support.
Manual Air Relief for easy, manual release of air from system.
Durable Flanged Inspection/Access Cover provides convenient access to top of filter.
Unitized, Corrosion- Proof Filter Tank molded of tough, durable, color-fast polymeric material for dependable all-weather performance.
Efficient, Multilateral Underdrain Assembly with 360º slotted, self-cleaning laterals, gives totally balanced flow and backwashing.
*Based upon 20 GPM/ft2, 814 LPM/m2 (Maximum Allowable NSF Rating)
High-tech features. Unparalleled filtration.
Hayward Pro-Grid uses superior filter performance to achieve remarkable water clarity, efficient flow and large cleaning capacity for pools of all types and sizes. Pro-Grid filter tanks are constructed of a durable glass-reinforced copolymer, for the ultimate in strength, durability and long life.
Featuring “service ease” assembly, Pro-Grid delivers low maintenance and dependable operation. Pro-Grid filters are also available with an optional control valve. Choose quality results and maximum value with Pro-Grid filters by Hayward, the first choice of pool professionals.
Pro-Grid™
VERTICAL GRID D.E. FILTERS
FILT
ER
S
Total System: Pumps I Filters I Heating I Cleaners I Sanitization I Automation I Lighting I Safety I White Goods
Hayward is a registered trademarks and Pro-Grid, Selecta-Flo and Vari-Flo are trademarks of Hayward Industries, Inc. © 2012 Hayward Industries, Inc.
4- or 6-Position Multiport Valve
LITPG12
SPECIFICATIONS – PRO-GRID VERTICAL GRID D.E. FILTERSFILTER TYPE Vertical Grid Diatomite: 24, 36, 48, 60, 72 ft.² (2.2, 3.3, 4.4, 5.5, 6.6 m²)
FILTER TANK Injection-molded
FILTER ELEMENTS Monofilament polypropylene cover fitted over 8 curved, high-impact grids
CONTROL VALVE
1½" or 2", 6-position Vari-FloTM
2", 4-position Selecta-Flo
2", 2-position slide valve.May also be plumbed singularly or in series with quick-connect union couplings.
PERFORMANCE RANGE ½ to 3 HP (30 to 150 GPM)
DIMENSIONS
DE2420 – 24" W x 32 ½" H (61 cm x 83 cm)DE3620 – 24" W x 34 ½" H (61 cm x 88 cm)DE4820 – 24" W x 40 ½" H (61 cm x 103 cm)DE6020 – 24" W x 46 ½" H (61 cm x 118 cm) DE7220 – 24" W x 52 ½" H (61 cm x 133 cm)
PERFORMANCE DATA
MODEL NUMBER
EFFECTIVE FILTRATION AREA
DESIGN FLOW RATE*
TURNOVER
GALLONS KILOLITERS
ft.² m² GPM LPM 8 hrs. 10 hrs. 8 hrs. 10 hrs.
DE2420DE3620DE4820DE6020 DE7220
2436 486072
2.23.34.45.56.7
487296
120144
182272363454545
23,04034,56046,08057,60069,120
28,80043,20057,60072,00086,400
87131174218261
109164218273327
Plumbing Versatility means a wide variety of valve options for customized control of your filtration system, including Hayward’s 2", 2-position slide valve.
* Determined by pump size and piping system hydraulics; 2" piping is recommended for flow rates equal to or greater than 90 GPM (341 LPM). Hayward doesn’t recommend flow rates above 150 GPM.
2-Position Slide Valve
Valve Options
620 Div is ion Street I E l izabeth, NJ 07201
To take a closer look at Hayward Filters or other Hayward Products, go to www.hayward.com or call 1-888-HAYWARD
Combination Pressure and Cleaning-Cycle-Indicator Gauge gives visual indication when filter grid elements need cleaning. Manual Air Relief
provides an easy way to manually purge air from filter
Screenless Internal Air Scavenger Tube continuously vents and eliminates clogging.
High-Strength Filter Tank molded from durable glass reinforced copolymer material for dependable, corrosion-free performance.
High-Impact Grid Elements designed for up-flow filtration and top-down backwashing for maximum efficiency.
Self-Aligned Tank Top and Bottom make access to servicing grid elements fast and simple.
Heavy-Duty, Tamper-Proof One-Piece Clamp securely fastens tank top and bottom together and allows quick access to all internal components without disturbing piping or connections.
Marked Short Element and Manifold provide clear guidelines for re-assembly of grid elements during cleaning. Union Locknuts
make disassembly/reassembly of filter from piping fast and easy.Inlet Diffuser Elbow
distributes flow of incoming water evenly to all filter elements.
Bulkhead Fittings that are extra durable and heat resistant.
Full-Size 11⁄2” Integral Drain provides fast,100% clean-out and easier flushing.
Perflex®
EXTENDED-CYCLE DE FILTER SERIES
The Perflex® Extended-Cycle DE filter series cleans pools fast — removing the smallest particles the first time through. That’s because Perflex incorporates a patented Flex-Tube™ design that works in combination with D.E. (diatomaceous earth) filter media to produce the clearest, most sparkling water possible.
FI
LT
ER
S
Total System: Pumps I Filters I Heating I Cleaners I Sanitization I Automation I Lighting I Safety I White Goods
620 Div is ion Street I E l izabeth, NJ 07201
To take a closer look at Hayward Filters or other Hayward products, go to www.hayward.com or call 1-888-HAYWARD
Hayward and Perflex are registered trademarks and FlexTube is a trademark of Hayward Industries, Inc. © 2012 Hayward Industries, Inc.
The exclusive Perflex Extended-Cycle gives you long filter cycles between cleaning — up to eight weeks depending on pool size and use. Because the same D.E. filter media is used over and over again, Perflex is a real work saver. And, it only takes minutes to extend the cycle.
Perflex filters stretch your dollars too! Since Perflex cleans without backwashing, you save hundreds of gallons of treated pool water. Plus, Perflex saves on electricity because its efficient design offers less resistance to flow and produces more filtered water with less pump horsepower.
No Backwash – When conventional filters need backwashing, Perflex only needs “Bumping”. “Bumping” repositions the dirt within the filter so the flow of water is not impeded. This is called Regeneration, because flow and pressure are restored, extending the filter cycle. When the dirt-holding capacity of the Perflex filter is reached, cleaning is simple. Just “Bump” and drain.
Bump Handle An exclusive Perflex feature. It activates the mechanism causing the Flex-Tubes to instantly and uniformly clean themselves of dirt and D.E. filter media.
Filtered Water (To Pool)
Unfiltered Water (From Pool)
MODEL EFFECTIVE DESIGN TURNOVER (GALS.) DE NUMBER FILTRATION AREA FLOW RATE* REQUIRED
EC65A 27 ft.2 67 GPM 6 lbs.
EC75A 40 ft.2 100 GPM 7 lbs.
8 Hr 10 Hr
32,200 90,250
48,000 60,000
Performance Data
* Based on 2.5 GPM/ft.2 (maximum allowable NSF rating)
Flex-Tubes The proven patented filter elements that efficiently reuse the D.E. filter media and dirt mixture forming a fresh filtering surface.
Mixing Chamber Engineered to produce a uniform, high velocity mixing of the D.E. filter media and dirt that is removed from the Flex-Tubes by “Bumping”.
Heavy Duty Filter Tank Injection-molded of high-strength Polymer for dependable, corrosion-free performance.
Check Valve This integral valve automatically prevents system backflow whenever the pump is off.
Combination Pressure Gauge and Threaded Inspection/Service Port Easy to read and remove when filter needs cleaning.
Self Venting As filtered water is returned to the pool, Perflex filters automatically expel any air that may be present in the system.
LITPERING12
Specifications – Perflex® Extended-Cycle DE Filters FILTER TYPE: Extended-Cycle Diatomite, EC65A or EC75A
FILTER TANK: Injection-molded Polymer
FILTER ELEMENTS: Dacron Flex-Tubes (120)
FASTENINGS: Stainless Steel
DIMENSIONS: 21” W x 31” H (533 mm x 787 mm)
FI
LT
ER
S
Total System: Pumps I Filters I Heating I Cleaners I Sanitization I Automation I Lighting I Safety I White Goods
High performance.Operational convenience.
SwimClear™
QUAD-CLUSTER CARTRIDGE FILTERS
Hayward SwimClear reaches new horizons in cartridge filter technology. A cluster of four reusable polyester cartridge elements provides a choice of 225, 325, 425 and now 525 ft.2 of heavy-duty, dirt-holding capacity and extra-long filter cycles. SwimClear filter tanks are made from a reinforced co-polymer material for the ultimate in strength, durability and long life – even for the toughest applications and environmental conditions. Discover the crystal clear results and reliable performance of SwimClear by Hayward – the first choice of pool professionals.
620 Division Street I El izabeth, NJ 07201
To take a closer look at Hayward Filters, go to www.hayward-pool.com or call 1-888-HAYWARD
LITSWC10
Hayward and Hayward Energy Solutions are registered trademarks and SwimClear and Noryl are trademarks of Hayward Industries, Inc. ©2010 Hayward Industries, Inc.
CPVC Union Connections
SPECIFICATIONS – SWIMCLEAR™ QUAD-CLUSTER CARTRIDGE FILTERS
FILTER TYPEQuad-Cluster cartridge elements: 225, 325, 425 and 525 ft.² total (20.9, 30.2, 39.5 and 48.0 m²)
FILTER TANK Injection-molded glass reinforced co-polymer
FILTER ELEMENTS Reinforced Polyester
PERFORMANCE RANGE ½ to 3 HP (30 to 150 GPM) .37 to 2.24 kW (114 to 568 LPM)
DIMENSIONS
C2030 – 23" W x 32 ½" H (58 cm x 81 cm)C3030 – 23" W x 34 ½" H (58 cm x 87 cm)C4030 – 23" W x 40 ½" H (58 cm x 102 cm)C5030 – 23" W x 46 ½" H (58 cm x 117 cm)
PERFORMANCE DATA
MODEL NUMBER
EFFECTIVE FILTRATION AREA
DESIGN FLOW RATE*
TURNOVER
GALLONS KILOLITERS
ft.² m² GPM LPM 8 hrs. 10 hrs. 8 hrs. 10 hrs.
C2030
C3030
C4030
C5030
225
325
425
525
20.9
30.2
39.5
48.8
84*
122*
150**
150**
318
462
568
568
40,320
58,560
72,000
72,000
50,400
73,200
90,000
90,000
153
222
273
273
191
277
341
341
Combination Pressure and Cleaning-Cycle-Indicator Gauge gives visual indication when cartridge filter elements need cleaning.
*Based on NSF recommended rate for commercial use at .375 GPM/ft.²** Determined by pump size and piping system hydraulics; 2" piping is
recommended for flow rates equal to or greater than 90 GPM (341 LPM). Hayward doesn’t recommend flow rates above 150 GPM.
Pressure and Cleaning Gauge
CPVC Union Coupling Connection provides plumbing options of 2 ”or 2½ ”piping with 2 ” full flow internal piping for maximum performance.
Noryl™ Bulkhead Fittings for extra strength and heat resistance.Full-Size 1½ ”Integral Drain
provides fast clean-out and flushing.
Uniform Low-Profile Tank Base Design makes removal of cartridge elements fast and simple.
High-Strength Filter Tank is made from durable, glass reinforced co-polymer to meet the demands of the toughest applications and environmental conditions, including in-floor cleaning systems.
Self-Aligned Tank Top and Bottom make access to servicing Quad-Cluster cartridge elements quick and easy.
Heavy-Duty, Tamper-Proof, One-Piece Clamp securely fastens tank top and bottom together and allows quick access to all internal components without disturbing piping or connections.
Quad-Cluster Cartridge Elements provide 225, 325, 425 or 525 ft.2 of filter area and extra dirt-holding capacity for long filter cycles. Precision-engineered core provides extra strength and superior flow.
Top Manifold provides excellent filtration and hydraulic performance.
Manual Air Relief is a high capacity, rapid release manual air relief valve that bleeds air with a quick quarter turn of the lever.
Star-Clear™ Plus CARTRIDGE FILTERS
FI
LT
ER
S
Total System: Pumps I Filters I Heating I Cleaners I Sanitization I Automation I Lighting I Safety I White Goods
Star-Clear Plus filters from Hayward® deliver quality, value and convenience in cartridge filtration. From precision engineering to its durable glass reinforced copolymer body, Star-Clear Plus filters work harder, achieving maximum water flow and superior filtration with minimal maintenance necessary.
Trust Star-Clear Plus filters to perform in the most demanding applications and environmental conditions. Thanks to its larger filtration element, it utilizes a greater effective filtration area than cartridge filters of similar size and price range. For greater performance, higher efficiency and crystal clear results, step up to Star-Clear Plus.
Hayward is a registered trademark and Star-Clear is a trademark of Hayward Industries, Inc. © 2012 Hayward Industries, Inc.
Easy-to-clean cartridge elements Hayward cartridges have extra dirt-holding capacity and are engineered of durable, high-quality materials to last for years with only minimal care. Simply remove the cartridge element and hose off with Hayward’s EC2024 Jet-Action Cleaning Wand to restore the filter to clean operating condition.
LITSCP12
SPECIFICATIONS – STAR-CLEAR PLUS CARTRIDGE FILTERS
FILTER TYPECartridge Element: 75 ft.², 90 ft.², 120 ft.² , 150 ft.² , 175 ft.² 200 ft.² (6.97 m², 8.37 m², 11.15 m² ,13.94 m²,16.26 m², 18.58 m² )
FILTER TANK High-Strength, Injection-Molded durable glass reinforced copolymer
FILTER ELEMENT Reinforced Polyester
PERFORMANCE RANGE 75 to 120 GPM, 284 to 455 LPM
DIMENSIONS
C751-30" H x 13⅜ W (762 mm x 340 mm)C900-30" H x 13⅜ W (762 mm x 340 mm)C1200-36" H x 13⅜ W (914 mm x 340 mm)C1502-36” H x 13⅜ W (914 mm x 340 mm)C17502-43" H x 13⅜ W (1,080 mm x 340 mm)C2002-43” H x 13⅜ W (1,080 mm x 340 mm)
PERFORMANCE DATA
MODEL NUMBER
EFFECTIVE FILTRATION AREA
DESIGN FLOW RATE*
TURNOVER
GALLONS KILOLITERS
ft.² m² GPM LPM 8 hrs. 10 hrs. 8 hrs. 10 hrs.
RESIDENTIAL
C751 75 6.97 75 284 36,000 45,000 136 171
C900 90 8.36 90 341 43,200 54,000 164 205
C1200 120 11.15 120 455 57,600 72,000 455 273
C1502 150 13.94 120 455 57,600 72,000 455 273
C17502 175 16.26 120 455 57,600 72,000 455 273
C2002 200 18.58 120 455 57,600 72,000 455 273
PUBLIC
C751 75 6.97 28 107 13,500 16,875 51 64
C900 90 8.36 34 128 16,200 20,250 61 77
C1200 120 11.15 45 171 21,600 27,000 82 102
C1502 150 13.94 56 213 26,880 33,600 102 128
C17502 175 16.26 66 249 31,680 39,600 120 150
C2002 200 18.58 75 284 36,000 45,000 136 170
½" 14 NPSM Filter Drain for fast draining. Also accepts standard spigot valve.
* Determined by pump size and piping system hydraulics; 2" piping is recommended for flow rates of 90 GPM (341 LPM). Public Design Flow rates based on .375 GPM/ft.2 (15.26 LPM/m2).
Single Locking Knob securely fastens filter head to filter tank, eliminating clamps or bolts.
Filter Head provides easy access to cartridge element. May be rotated to conveniently position gauge and manual air relief valve.
Heavy-Duty Filter Tank is injection molded of durable glass reinforced copolymer for dependable, corrosion-free performance. Automatic Air Purge
purges any trapped air during filter operation.
Single-Element Cartridge is engineered of high-quality reinforced polyester, with gasketed molded end caps, for maximum efficiency, easier cleaning and longer life. Precision Engineered Element Core
provides extra strength and superior flow.
Elevated Filtered Water Collector with Debris Sump prevents accidental bypass of heavy debris to pool or spa when cartridge is removed for cleaning.
1½” or 2” FIP, or 2” SKT Connections (adapters provided on some models) for plumbing versatility.
620 Division Street I El izabeth, NJ 07201
To take a closer look at Hayward Filters, or other Hayward products go to www.hayward.com or call 1-888-HAYWARD.
Star-Clear™ Plus CARTRIDGE FILTERS
FI
LT
ER
S
Total System: Pumps I Filters I Heating I Cleaners I Sanitization I Automation I Lighting I Safety I White Goods
Star-Clear Plus filters from Hayward® deliver quality, value and convenience in cartridge filtration. From precision engineering to its durable glass reinforced copolymer body, Star-Clear Plus filters work harder, achieving maximum water flow and superior filtration with minimal maintenance necessary.
Trust Star-Clear Plus filters to perform in the most demanding applications and environmental conditions. Thanks to its larger filtration element, it utilizes a greater effective filtration area than cartridge filters of similar size and price range. For greater performance, higher efficiency and crystal clear results, step up to Star-Clear Plus.
Hayward is a registered trademark and Star-Clear is a trademark of Hayward Industries, Inc. © 2011 Hayward Industries, Inc.
Easy-to-clean cartridge elementsHayward cartridges have extra dirt-holding capacity and are engineered of durable, high-quality materials to last for years with only minimal care. Simply remove the cartridge element and hose off with Hayward’s EC2024 Jet-Action Cleaning Wand to restore the filter to clean operating condition.
LITSCP11
SPECIFICATIONS – STAR-CLEAR PLUS CARTRIDGE FILTERS
FILTER TYPECartridge Element: 75 ft.², 90 ft.², 120 ft.² 175 ft.² (6.97 m², 8.37 m², 11.15 m² and 16.26 m²)
FILTER TANK High-Strength, Injection-Molded durable glass reinforced copolymer
FILTER ELEMENT Reinforced Polyester
PERFORMANCE RANGE 75 to 120 GPM, 284 to 455 LPM
DIMENSIONS
C751-30" H x 13⅜ W (762 mm x 340 mm)C900-30" H x 13⅜ W (762 mm x 340 mm)C1200-36" H x 13⅜ W (914 mm x 340 mm)C17502-43" H x 13⅜ W (1,080 mm x 340 mm)
PERFORMANCE DATA
MODEL NUMBER
EFFECTIVE FILTRATION AREA
DESIGN FLOW RATE*
TURNOVER
GALLONS KILOLITERS
ft.² m² GPM LPM 8 hrs. 10 hrs. 8 hrs. 10 hrs.
RESIDENTIAL
C751 75 6.97 75 284 36,000 45,000 136 171
C900 90 8.36 90 341 43,200 54,000 164 205
C1200 120 11.15 120 455 57,600 72,000 218 273
C17502 175 16.26 120 455 57,600 72,000 218 273
PUBLIC
C751 75 6.97 28 107 13,500 16,875 51 64
C900 90 8.36 34 128 16,200 20,250 61 77
C1200 120 11.15 45 171 21,600 27,000 82 102
C17502 175 16.26 66 249 31,680 39,600 119 149
½" 14 NPSM Filter Drain for fast draining. Also accepts standard spigot valve.
* Determined by pump size and piping system hydraulics; 2" piping is recommended for flow rates of 90 GPM (341 LPM). Public Design Flow rates based on .375 GPM/ft.2 (15.26 LPM/m2).
Single Locking Knob securely fastens filter head to filter tank, eliminating clamps or bolts.
Filter Head provides easy access to cartridge element. May be rotated to conveniently position gauge and manual air relief valve.
Heavy-Duty Filter Tank is injection molded of durable glass reinforced copolymer for dependable, corrosion-free performance.
Automatic Air Purge purges any trapped air during filter operation.
Single-Element Cartridge is engineered of high-quality reinforced polyester, with gasketed molded end caps, for maximum efficiency, easier cleaning and longer life.
Precision-Engineered Extruded Core provides extra strength and superior flow.
Elevated Filtered Water Collector with Debris Sump prevents accidental bypass of heavy debris to pool or spa when cartridge is removed for cleaning.
1½” or 2” FIP, or 2” SKT Connections (adapters provided on some models) for plumbing versatility.
620 Division Street I El izabeth, NJ 07201
To take a closer look at Hayward Filters, go to www.haywardpool.com or call 1-888-HAYWARD.