© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282
461
HARDWARE, BUILDING & CONSTRUCTION
AXES/SPLITTERS
Tasmanian Pattern Axe (Hickory Handle)• Made in Sweden• 2.0kg/4.5lbs 813mm/32”• Hickory handle
Material No. ATR45C32
NEW Super Splitter AxeAn Axe and Blocksplitter in one. The SuperSplitter Axe takes all the advantages of a conventional axe – lightweight design with cutting head and balance shaft – and adds two angled deflecting flanges to the cheeks. This drives the timber apart on impact in the same way a conventional wedge headed blocksplitter does. It’s ideally weighted with a positive follow-through. The perfect tool for splitting timber.
• 10 year guarantee • Contoured Australian Spotted Gum handle • 2kg drop forged, high carbon steel head • Hardened, tempered and hand sharpened • Suitable for both soft and hard woods • Lacquer sealed handle • Made in Australia
Product Code Width Length Overall Length
603600 140mm 190mm 795
BRuSHES - PAINT
Industrial Brush RangeA wooden handled, white hog bristle brush designed for use with fibreglass resins and strong solvents.
Part No. Description Size
3140 Industrial 12mm
3143 Industrial 25mm
3147 Industrial 38mm
3151 Industrial 50mm
Part No. Description Size
3156 Industrial 63mm
3159 Industrial 75mm
3167 Industrial 100mm
Flat Varnish Brush RangePlastic handled, hog bristle brush, designed for use with varnish and oil-based paints.
Part No. Description Size
1345 Flat Varnish 25mm
1353 Flat Varnish 38mm
Part No. Description Size
1361 Flat Varnish 50mm
Economy Brush RangeA general purpose, economically priced, black hog bristle brush.
Part No. Description Size
4040 Economy 25mm
4047 Economy 50mm
Part No. Description Size
4054 Economy 75mm
4061 Economy 100mm
HAND
TOO
LS
82© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282
fatMax® xtreme™ fubar™ - functional utility BarWeight: 1.8kg/64oz. Forged from one piece of high carbon steel. Two-tiered jaw for grabbing common dimensional lumber and decking, tempered chisel blade for splitting and cutting building materials, large mouth striking face for maximum demolition effect, bevelled nail slot for pulling and prying nails, textured bi-material grip is over-moulded directly onto the bar for excellent comfort and control even when wet.
Part Number: 55.099
HaMMeRS – utility
fatMax® fubar™ ii functional utility BarWeight: 1kg/35oz. Easy to swing 1kg total weight. 22oz head weight – similar to a hammer. Serrated jaw for gripping timber, tapered nail slot for pulling nails. One piece forged steel. Textured cushion grip for comfort and control. Beveled chisel/prying end.
Part Number: 55.119
Part Number description Weight5WHRg Welding Hammer Alloy Head c/w Rubber Grip 0.52kg5WHSP Welding Hammer Alloy Head c/w Spring Grip 0.45kg
HaMMeRS - WeldiNg
Welding Hammers • Used for chipping off slag and spatter around welds• Also used as geologist’s or miner’s tool• Head forged from chrome alloy steel• Excellent balance, with hardened ends that do not flatten when chipping• Correctly heat treated to best suit product application* Warning wear safety goggles user and bystander
HaNdleS
Handles All handles are kiln dried, fine sanded and lacquered ensuring long life even in dry environments. Made to Australian Standards (AS1729-1994) Grade A.
Product Code description
tRa380 380mm Hardwood Hatchet Handle
tRa600 600mm Hardwood Axe Handle
tRa800 800mm Hardwood Axe Handle
tRBP300 300mm Hardwood Ball Pein Hammer Handle
tRBP450 400mm Hardwood Ball Pein Hammer Handle
tRB1350/22 22mm Diameter, 1350mm Hardwood Broom Handle
tRC250 250mm Hardwood Club Handle Handle
tRH1350 1350mm Hardwood Hoe Handle
tRMP900 900mm Hardwood Mattock/Pick Handle
tRR1350/25 25mm Diameter, 1350mm Hardwood Rake Handle
tRS750 750mm Hardwood Sledge Handle
tRSd670 670mm Hardwood Shovel/Fork Handle
tRSlB1300 Bent 1300mm Hardwood Shovel Handle
tRWS900 900mm Hardwood Wood Splitter Handle
Part Number description
SaB 76262 Blue
SaB 76261 Yellow
SaB 76264 Green
SaB 76260 Red
SaB 76263 White
tRa600
tRSd670
tRMP900
aluminium Handle 1450mm x 25mm• Aluminium handle universal thread.
Metal Handle Suits BroomsMetal Handle with soft grip 25mm x 1400mm - no thread. Recommended handle for Bulldozer Brooms.
Part Number: SaB 57201
Part Number Size Weight
5fH075 75mm 0.02kg
5fH100 100mm 0.03kg
5fH125 125mm 0.04kg
5fH150 150mm 0.05kg
HaNdleS - file
file Handles • Used to handle files and other suitable tools• Pre-drilled wooden handle with metal collar• Fits to handle by placing tang of file in the hole and tapping lightly on bench until tight• Softwood timber will absorb sweat and oil when using• Available in 75, 100, 125 and 150mm sizes as well as packs of 2* Warning wear safety goggles user and bystander
ABRA
SIVE
S
48© Copyright Industrial Supply Group Pty Limited. ACN 055 790 282
sharPeNiNG stoNe - oiL
Diamond sharpening stone oil For use on natural and synthetic oil stones. • Natural highly refined mineral oil. • Recommended for faster and easier sharpening. • Safe for kitchen use.
Part Number specification Professional Quality
87940 130ml (4½ ounces)
PartNumber
cat Gritthick mm
Width mm
Length mm
be205664 149C Fine 10 22 80
Pocket stone• Rapid cutting pocket stone for sharpening pocket knives, scissors, small tools, fish hooks, etc.
Quick sharpening combination bench stonesOne side fine abrasive the other side coarse abrasive. • For speedy sharpening to give a keen edge on chisels, plane irons and knives.
PartNumber
catthick mm
Width mm
Length mm
silicon carbide - oil filledbe173266 KS100 30 80 230be173274 108 25 50 200be173282 109 25 50 150
silicon carbide - Non oilbe146587 KS100 30 80 230be146544 108 25 50 200be377015 109 25 50 150
Part Number specificationbb380393 16 Wedge Part Number specificationbb380407 24 Wedge bb380423 80 Wedgebb380415 36 Wedge bb380431 120 Wedge
concrete Wedge blocks
WeDGe bLock - coNcretesharPeNiNG stoNe
PartNumber
cat Grit thick mm
Width mm
Length mm
be205524 196C Comb 16 75 Diameter
axestone - coarse / Fine• The axe stone is popular with timbermen and campers. It quickly puts a keen edge onto axes, tomahawks, hatchets, machetes, and sheath knives.
PartNumber
catthick mm
Width mm
Length mm
aluminium oxide - oil filledbe173304 IB8 25 50 200be173312 IB6 25 50 150
aluminium oxide - Non oilbe376981 IB8 25 50 200be377007 IB6 25 50 150
Fine sharpening combination bench stonesOne side fine abrasive the other side coarse abrasive. • For craftsmen - to sharpen high quality steel tools when the keenest edge is required.
Wire brushes
twist knot bevel brushesParticularly suitable for working in hard to reach areas such as edges and internal corners.
Part Number Description Ø mm MsFs (rPM)28504555 HSK100 10 x 1.50 26G 100 15,00028504355 HSK100 14 x 2.0 26G 100 15,000
Wheel brushesFor general cleaning using bench machines or portable hand tools. Supplied with multi-bore adaptors to fit arbors from 12 - 25.4mm.
Part Number Description Ø mm MsFs (rPM)28769155 W150 x 19mm x Multi 28G 150 6,00028035655 W200 x 19mm x Multi 28G 200 4,600
end brushesFor working in hard-to-reach areas such as cleaning of engines, dies and tools.
Part Number Description Ø mm (rPM)
28791255 D2 Flat End 30G 19 11 13 3,00028794355 D13 Pencil Flat End 30G 125 8 10 3,00028794555 D14 Pencil Pointed End 30G 50 8 10 3,000
scratch brushesIdeal for general cleaning or rust, paint, etc. and light deburring.
Part Number Description225509 4 Row Scratch Brush - Wooden handle224324 4 Row Scratch Brush - Plastic handle
Part Number Description Ø mm MsFs (rPM)28787255 TC75 10 x 1.50 26G 75 12,00028787355 TC75 14 x 2.0 26G 75 12,000
twist knot cup brushesFor heavy duty cleaning, burr, rust, weld or paint removal or surface roughening using high speed electric and air tool and drill presses.
brush Ø mm
stem length mm