(Govt. of India)
(Ministry of Railways)
HAND TOOLS REQUIRED IN
COACH WASHING CUM PIT LINES
(For official use only)
CAMTECH/99/M/TOOLS-WL/1.0
DECEMBER 1999
MAHARAJPUR, GWALIOR - 474020
Centre
for
Advanced
Maintenance
TECHnology Excellence in Maintenance
FOREWORD
Standardisation of Hand Tools is an important step
towards ensuring implementation of effective and uniform
maintenance procedures. CAMTECH has taken an important
lead in this direction by preparing this handbook giving
compiled list of handtools required for coach washing cum
pit lines.
Apart from giving detailed description of each
handtool, the important parameters and specifications are
also given therein. This will prove to be useful to the
maintenance depots at the time of indenting the material
thereby ensuring availability of proper tools to the
maintenance staff.
CAMTECH, Gwalior D.K. Saraf
January 28, 2000 Director
PREFACE
CAMTECH has already circulated Standard Integrated
facilities for washing lines. CAMTECH has prepared this
handbook to supplement the same. This is aimed at having
standard tools in the washing lines. The detailed specification
of the tools with approximate cost taken from reputed
manufacturer’s price list have been given.
This handbook does not supersede any instructions
issued from Railway Board and RDSO.
CAMTECH, Gwalior Rakesh Bahl
Date : 27.01.2000 Joint Director (Mech.)
CONTENTS
Contents Page no.
FOREWORD ii
PREFACE iii
CONTENTS iv
CORRECTION SLIP v
Chapter 1 GENERAL 1
1.1 Introduction 1
1.2 Objective 2
1.3 Methodology 2
Chapter 2 INFORMATION ABOUT HANDTOOLS
WASHING CUM PIT LINES 4
2.1 Fitter Tools 4
2.2 Carpenter Tools 20
Chapter 3 TOOLS SUGGESTED FOR STANDARDISATION 29
3.1 Fitter Tools 29
3.2 Train Examiner Tool 31
3.3 Carpenter Tools 31
3.4 Trimmer Tools 33
3.5 Cleaner Tools 33
Appendix A Mechanical Gauges 34
Appendix B List of items to be kept at Primary
Examination points 35
ISSUE OF CORRECTION SLIPS
The correction slips to be issued in future for this handbook will
be numbered as follows :
CAMTECH/99/M/TOOLS-WL/1.0/C.S. # XX date-----------
Where “XX” is the serial number of the concerned
correction slip (starting from 01 onwards).
CORRECTION SLIPS ISSUED
Sr. No.
of
C.Slip
Date of
issue
Page no. and Item no.
modified
Remarks
CAMTECH/99/M/TOOLS-WL/1.0
Hand Tools for Mechanical Artisans-Washing Line Dec’99
CHAPTER 1
GENERAL
1.1 INTRODUCTION
Proper Standard Quality Hand Tools are the backbone of
the maintenance and repair. In absence of proper tools, wrong
practices will be followed viz for opening or tightening a nut
by tapping or hammering with the help of chisel/punch. In
such event component/assembly is bound to get damaged,
threads getting loose or stripped. Artisans will take more time
to repair or may not be able to repair. This may cause failure
or reduce the life of components.
Sub standard, poor quality tools may cause injury to staff
and life of the tool will be less, as such while standardising
tools proper material specification of tools as per job
requirement should be considered.
Tools should be of International Standard and pass the
meticulous and continuous testing from Raw Material up to
final finished products.
CAMTECH/99/M/TOOLS-WL/1.0 2
Hand Tools for Mechanical Artisans-Washing Line Dec’99
1.2 OBJECTIVE
To standardise Hand Tools needed for maintenance of
rakes comprising of coaches in washing line. This will ensure
proper quality maintenance of rolling stock, which in turn
shall:
Minimise failure of rakes/coaches
Damages to coach components shall be reduced to a great
extent, because, for want of proper tool, at present bad
practices are being adopted
Fatigue of artisan staff shall be minimised.
1.3 METHODOLOGY
Opinion and suggestions were gathered from various
depots. Depots visited are:
Kurla depot - Central Railway
Basin Bridge - Southern Railway
CSTM depot - Central Railway
BCT depot - Western Railway
Nizamuddin Depot - Northern Railway
CAMTECH/99/M/TOOLS-WL/1.0 3
Hand Tools for Mechanical Artisans-Washing Line Dec’99
Various zonal railways were contacted to send their
views and comments. Based on this the list of Hand Tools
required in washing line (mechanical) for artisans, carpenters,
trimmer and cleaner have been suggested
CAMTECH/99/M/TOOLS-WL/1.0 4
Hand Tools for Mechanical Artisans-Washing Line Dec’99
CHAPTER 2
INFORMATIONS ABOUT HAND TOOLS FOR
WASHING CUM PIT LINES (MECHANICAL DEPARTMENT)
2.1 FITTER TOOLS
2.1.1 SPANNERS
2.1.1.A Adjustable Spanners
Generally Conforming to IS 6149-1984 Grade II
Length
mm
Least Max.
Opening mm
Phosphate Finish
Price Each Rs
Chrome Plated
Price Each Rs
155 19 77.00 91.00
205 26 100.00 116.00
255 30 132.00 152.00
305 35 174.00 194.00
380 43 358.00 388.00
CAMTECH/99/M/TOOLS-WL/1.0 5
Hand Tools for Mechanical Artisans-Washing Line Dec’99
2.1.1.B Double Ended Open Jaw Spanners
Chrome Vanadium Steel, Chrome Plated
Generally Conforming IS 2028-1991
Size in
MM
Price Each
Rs.
Size in
Inch
Price
Each Rs 6 x 7 10.50 9/16 x 5/8 25.00
8 x 9 11.50 5/8 x ¾ 32.00
10 x 11 12.50 ¾ x 7/8 40.00
12 x 13 16.50 3/8 x 7/16 14.00
14 x 15 19.50
16 x 17 23.50
18 x 19 29.00
20 x 22 37.00
21 x 23 44.50
24 x 27 59.00
25 x 28 67.00
30 x 32 78.00
32 x 36 100.50
CAMTECH/99/M/TOOLS-WL/1.0 6
Hand Tools for Mechanical Artisans-Washing Line Dec’99
2.1.2 PLIERS
2.1.2.A Combination Pliers
INSULATED WITH THICK CELLULOSE ACETATE
SLEEVE (C.A.SLEEVE)
Generally Conforming to IS 3650-1981
Length
mm
Without Joint Cutters
Price Each Rs
With Joint Cutters
Price Each Rs
160 107.00 109.00
180 115.00 117.00
205 130.00 132.00
CAMTECH/99/M/TOOLS-WL/1.0 7
Hand Tools for Mechanical Artisans-Washing Line Dec’99
2.1.2.B Inner and External Circlip Pliers
INSULATED WITH THICK C.A. SLEEVE
Generally Conforming to IS 7989-1976
Description Capacity
mm
Length in Price
Each Rs
Straight Nose 19-60 155 116.00
Bent Nose 19-60 160 116.00
CAMTECH/99/M/TOOLS-WL/1.0 8
Hand Tools for Mechanical Artisans-Washing Line Dec’99
2.1.2.C Long Nose Pliers
INSULATED WITH THICK C.A. SLEEVE
Generally Conforming to IS 3552-1989
Description Length in mm Price Each Rs
Flat Nose 160 107.00
Round Nose 160 107.00
CAMTECH/99/M/TOOLS-WL/1.0 9
Hand Tools for Mechanical Artisans-Washing Line Dec’99
2.1.3 SCREW DRIVERS
2.1.3.A C.A Transparent Green Handle
Generally conforming to IS 844-1979
High grade steel, hardened and plated to give long life.
Blade Length
(mm)
Blade Dia
(mm)
Tip Dimension
(mm)
Price
Each Rs
50 3 1.6 x 0.4 15.50
75 3 3.0 x 0.5 19.00
75 4 4.3 x 0.6 19.00
150 6 6.0 x 0.8 34.50
250 8 8.0 x 1.2 60.00
400 10 10.0 x 1.5 104.00
CAMTECH/99/M/TOOLS-WL/1.0 10
Hand Tools for Mechanical Artisans-Washing Line Dec’99
2.1.4 SOCKETS- 12.7 mm (1/2” ), SQUARE DRIVE
AND ACCESSORIES
HIGH GRADE CHROME VANADIUM STEEL
As per IS 6131-1980 & 7381-1986
Bi-hexagonal & Hexagonal
ONE SET
Product Item Sockets
(mm)
Price Per Set
Rs.
22 Sockets + 8,9,10,11,12,13,14,
15,16,17,18,19,21,
22,23,24,26,27,28,
29,30,32
2650.00
5 Accessories
Product nos.
Accessories
1753,1763,1773
1733,1715.
CAMTECH/99/M/TOOLS-WL/1.0 11
Hand Tools for Mechanical Artisans-Washing Line Dec’99
2.1.4.A Sockets Accessories
Product
No.
Item Length in
mm
Price each
Rs.
1753 Extension Bar 125 108.00
1763 Extension Bar 255 130.00
1773 Universal Joint 75 177.00
1733 “T” Handle 300 124.00
1715 Ratchet Handle 250 398.00
Product No. Contents Price each
(Rs.)
11 sockets +
4 accessories
10,11, 13,14,17, 19,22, 24, 27, 30, 32
Accessories
1753, 1763, 1703, 1715
1635.00
14 sockets +
4 accessories
8, 9,10,11, 13,14,17, 18,19, 21, 22
Accessories
1753, 1734, 1763, 1733
1315.00
6 sockets +
1 accessory
11, 14,17, 19,22, 24
Accessories 1734
440.00
CAMTECH/99/M/TOOLS-WL/1.0 12
Hand Tools for Mechanical Artisans-Washing Line Dec’99
2.1.5 WRENCHES
2.1.5.A Universal Pipe
Generally Confronting to IS 4003-1978.
Drop forced Jaw and Shank
Length
mm
Least Max.
Opening (mm)
Suitable for
pipe (inch)
Price each
Rs
260 63 1 ½ 290.00
360 75 2 415.00
CAMTECH/99/M/TOOLS-WL/1.0 13
Hand Tools for Mechanical Artisans-Washing Line Dec’99
2.1.5.B Pipe Wrenches
Length
mm
Least Max.
Opening mm
Price each
Rs
250 33 130.00
300 42 180.00
350 48 215.00
450 60 315.00
600 73 580.00
CAMTECH/99/M/TOOLS-WL/1.0
Hand Tools for Mechanical Artisans-Washing Line Dec’99
14
2.1.6 HAMMER WITH HANDLE
Head drop forged from high grade steel and heat treated
(Ball Pein, Claw, Cross pein)
Head as per IS 841-1983
2.1.6.A Ball pein and Cross pein
Weight in gms. Price Each Rs.
200 88.00
500 124.00
600 145.00
800 163.00
2.1.6.B Claw Hammer with handle
Weight in gms. Price Each Rs.
450 143.00
CAMTECH/99/M/TOOLS-WL/1.0
Hand Tools for Mechanical Artisans-Washing Line Dec’99
15
2.1.7 OCTAGONAL CHISELS
Made from high grade steel, forged and ground. Differential
heat treatment for cutting edge and striking end.
As per IS 402/ 74
Length In
mm
Cutting Edge in
mm
Price Each Rs.
135 9 40.00
150 16 49.00
200 22 68.00
CAMTECH/99/M/TOOLS-WL/1.0
Hand Tools for Mechanical Artisans-Washing Line Dec’99
16
2.1.8 PUNCHES
Generally Conforming to IS 7177-1974
Made out of high grade chrome steel accurately machined
and heat treated. Deep knurling on the body to ensures firm
grip.
Description Length in mm Price each Rs.
Centre Punch 100 22.50
Centre Punch 125 28.00
Drift Punch 100 23.50
CAMTECH/99/M/TOOLS-WL/1.0
Hand Tools for Mechanical Artisans-Washing Line Dec’99
17
2.1.9 RING SPANNERS
Bi-hexagonal and Hexagonal
Deep Off Set
Chrome vanadium steel, Chrome plated polish
Generally Conforming to IS-2029-1981
Range of set No. of pieces Price/Set
6-32 mm 10 699.00
6-32 mm 12 958.00
No. of
pieces
Contents Price
in Rs.
6
6
8
Size M
6x7, 8x9, 10x11, 12x13,14x15, 16x17
6x7, 8x9, 10x11, 14x15, 16x17, 18x19
6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19,
20x22
228.00
253.00
365.00
6
9
Size W
1/8x3/16, 3/16x1/4, 1/4x5/16, 5/16x3/8, 3/8x7/16,
7/16x1/2
1/8x3/16, 3/16x1/4, 1/4x5/16, 5/16x3/8, 3/8x7/16,
7/16x1/2, 1/2x9/16, 9/16x5/8
346.00
809.00
CAMTECH/99/M/TOOLS-WL/1.0
Hand Tools for Mechanical Artisans-Washing Line Dec’99
18
2.1.10 HACKSAW
IS : 2594
Dimensions for type C Straight Adjustable Flat
Hacksaw
Nominal size L Rs. each
250, 300 80,95
CAMTECH/99/M/TOOLS-WL/1.0
Hand Tools for Mechanical Artisans-Washing Line Dec’99
19
2.1.11 TOOL BAGS
Tool Bag has to be made as per requirement.
CAMTECH/99/M/TOOLS-WL/1.0
Hand Tools for Mechanical Artisans-Washing Line Dec’99
20
2.2 CARPENTER TOOLS
2.2.1 AXES
IS : 703
Weight and dimensions for Axes
Weight
Kg
A±3 B±3 B1±3 A±3 A±3 Rs.
1.80 171 35 32 51 70 140
2.70 216 41 38 51 83 165
CAMTECH/99/M/TOOLS-WL/1.0
Hand Tools for Mechanical Artisans-Washing Line Dec’99
21
2.2.2 BRACE
IS : 7041, 7042
DIMENSIONS FOR CARPENTERS BRACE
( Dimensions are in mm)
Normal
size
(2 x A)
A±2 B C±3/0 D±3/0 E F Rs.
250 125 12 130 150 14 24 110
300 150 12 145 160 14 24 125
CAMTECH/99/M/TOOLS-WL/1.0
Hand Tools for Mechanical Artisans-Washing Line Dec’99
22
2.2.3 PLANE
2.2.3.A Try Plane
IS : 8205
Dimensions for Carpenters Wooden Bodied Try Plane
Normal
size a
B±5 c±2 D±3 e±3 F±1.5 /0 Rs.
54 600 75 75 250 55.5 150
57 600 78 75 250 58.5 165
2.2.3.B Smoothing Plane
IS : 8206
Dimensions for Carpenters Wooden Bodied Smoothing
Plane Normal
size a
B±5 c±2 d±3 e±3 F±1.5 /0 Rs.
45 200 75 63 60 46.5 105
51 200 75 63 60 52.3 125
CAMTECH/99/M/TOOLS-WL/1.0
Hand Tools for Mechanical Artisans-Washing Line Dec’99
23
2.2.4 ADZES
IS : 663
Dimensions for Adzes
(Dimensions are in mm) Nominal
mass Kg
A E Dia of
Hole
Rs.
1 50 80 24 95
2 75 100 23 165
CAMTECH/99/M/TOOLS-WL/1.0
Hand Tools for Mechanical Artisans-Washing Line Dec’99
24
2.2.5 HAMMER
2.2.5.A Cross Pein Hammer With Handle
IS : 841-1983
Dimensions for Cross Pein Hammer
(Dimensions are in mm) Nominal mass
grams
A D G Rs.
200 75 24 20 89
500 105 35 25 127
CAMTECH/99/M/TOOLS-WL/1.0
Hand Tools for Mechanical Artisans-Washing Line Dec’99
25
2.2.5.B Claw Hammer
IS : 6546
Dimensions for Claw Hammer
(Dimensions are in mm) Nominal
size grams
A G±1.5 N
min.
Rs.
450/500 120 28 30 143
700 135 30 35 225
CAMTECH/99/M/TOOLS-WL/1.0
Hand Tools for Mechanical Artisans-Washing Line Dec’99
26
2.2.6 PINCER
Generally confirming to IS: 2615
Length in mm
Price in Rs. each
200 131.00
CAMTECH/99/M/TOOLS-WL/1.0
Hand Tools for Mechanical Artisans-Washing Line Dec’99
27
2.2.7 CLAMP
Length in mm
Price in Rs. each
105 230.00
205 520.00
CAMTECH/99/M/TOOLS-WL/1.0
Hand Tools for Mechanical Artisans-Washing Line Dec’99
28
2.2.8 SAW
2.2.8.A Cross Cut Saw
IS : 5098
Dimensions of Cross Cut Saw
(Dimensions are in mm)
Length in mm Rs. Each
250 145
350 160
2.2.8.B Rip Saw
IS : 5098
Dimensions of Rip Saw
(Dimensions are in mm)
Length in mm Rs. Each
600 305
650 345124
CAMTECH/99/M/TOOLS-WL/1.0
Hand Tools for Mechanical Artisans-Washing Line Dec’99
29
CHAPTER 3
TOOLS SUGGESTED FOR STANDARDISATION
3.1 FITTER TOOL
Sr.
No.
Description Qty./
Set
Cost
(Rs.)
01 Ball pein hammer with handle 600grms 1 149
02 Nylon hammer with handle, 2 lbs, 1 48.00
03 Sledge hammer with handle, 14 lbs 1 265
04 Chisel, Hexagonal Chrome Vanadium 8” 1 89
05 Pin punch 1 22.50
06 Combination plier,180 mm 1 117
07 Pipe wrench No. 14”, 18” 1 set 510
08 Measuring tape 2 m 1 25
09 Three cell torch (rechargeable) 1 90
10 Screw driver 250 mm (blade length) 1 51
11 Hacksaw 1 80
12 Inner circlip plier, Bent nose 1 116
13 Inner circlip plier, Straight nose 1 116
14 Feeler gauge 6” 1 set 65
15 Tommy bar 24” 1 45
16 Steel rule 12” 1 20
17 Double ended open spanner set (size in
mm) 6x7, 8x9, 10x11, 12x13,14x15,
16x17, 18x19, 20x22, 21x23, 24x27,
25x28, 27x32, 32x36
1 set 450
CAMTECH/99/M/TOOLS-WL/1.0
Hand Tools for Mechanical Artisans-Washing Line Dec’99
30
Sr.
No.
Description Qty./
Set
Cost
(Rs.)
18 Double ended open spanner set (size in W)
3/8x7/16, 9/16x 5/8, 5/8x3/4, 3/4x7/8
1 set 110
19 Ring spanner 10x11, 12x13, 14x15, 16x17,
18x19, 20x22, 24x27,30x32, 36x38
1 set 310
20 Socket 12.7 mm(1/2”), Square Drive 17,
18, 19, 24, 30, 32, 36, Chrome Vanadium
1 410
21 Socket accessory, Reversible Ratchet
(Square Drive) with extension rod 8”,
1 391
75
22 19mm special square drive socket spanner,
chrome vanadium steel, chrome plated
polished to IS 7381-1974 with extension
rod 215 mm with ratchet, size 34, 36 mm
for buffer to be ordered, having depth of 1
½ inch.
1 set 704
23 Adjustable spanner, 255 mm length 1 152
24 Wire brush 1 20
25 Paint brush 2” 1 40
26 Tool bag 1 1200
27 Wheel Barrow, Locally made 1 600
Suggestions 1 (Tools to be kept in tool room)
1. Electrical portable drill 2. Portable Surface Grinder
Suggestions 2
It is suggested that all the tools to be kept in Tool Bag with
little amount of spares like MU washers, BP and FP hose should be
taken one time in WHEEL BARROW, at the start by the artisan or
khallasi to his working place and need not to come time and again
in order to pickup tools required for maintenance from his cub-
board or from tool room. This in turn shall reduce, tremendous
fatigue to staff and time required to repair the rake/coach. One
wheel Barrow for 2 or 3 gangs may be provided.
CAMTECH/99/M/TOOLS-WL/1.0
Hand Tools for Mechanical Artisans-Washing Line Dec’99
31
3.2 TRAIN EXAMINER TOOL
Sr.
No.
Description Qty./
Set
Cost
(Rs.)
01 3 cell torch 1 90
02 Balance spring 1 120
02 Measuring tape 3 m 1 38
3.3 CARPENTER TOOL
Sr.
No.
Description Qty./
Set
Cost
(Rs.)
01 Hand saw, cross cut 18” 1 125
02 Claw pein hammer with handle 500 gms 1 143
03 Pop rivet plier 1 117
04 Screw driver 8”, 10” 1 set 185
05 Cutting plier 6” PVC coated 1 103
06 Try square 8” 1 45
07 Diamond cutter 1 180
08 Pin punch 4” 1 45
09 Chisel Hexagonal 6” 1 50
CAMTECH/99/M/TOOLS-WL/1.0
Hand Tools for Mechanical Artisans-Washing Line Dec’99
32
Sr.
No.
Description Qty./
Set
Cost
(Rs.)
10 Grinding stone 8” 1 30
11 Foot rule folding 1 25
12 Triangular file 6” 1 45
13 File half round bastard 16” long 1 105
14 Measuring tape 3 m 1 45
15 Pincer, 200 mm 1 131
16 Clamp, 105 mm 1 230
17 Tool bag 1 1200
CAMTECH/99/M/TOOLS-WL/1.0
Hand Tools for Mechanical Artisans-Washing Line Dec’99
33
3.4 TRIMMER TOOL
Sr.
No.
Description Qty./
Set
Cost
(Rs.)
01 Scissors 10” 1 85
02 3 cell torch (rechargeable) 1 90
03 Bent needle 1 20
04 Straight needle 1 10
05 Tailor measuring tape 40” 1 25
06 Paint brush for patching 3” 1 45
07 Hammer with handle, 500 gms, for
trimmer 1 124
3.5 CLEANER TOOL
Sr.
No.
Description Qty./
Set
Cost
(Rs.)
01 Broom 1 20
02 Washing brush with 6 ft bamboo handle 1 40
03 Washing brush ordinary 1 25
04 Cotton cloth piece (thick) 2 feet x 2 feet 1 30
05 Bucket (20 liters) 1 120
06 Washing rubber pipe, 20mm diameter 1 Stock
Item
07 Coupling 1 Stock
Item
08 Disposal bags 2 15
each
09 Duster 2 10
each
CAMTECH/99/M/TOOLS-WL/1.0
Hand Tools for Mechanical Artisans-Washing Line Dec’99
34
APPENDIX A
MECHANICAL GAUGES (TO BE KEPT AT TOOL ROOM)
Wheel distance gauge 1600 +2 /-1
Calliper of wheel diameter
Buffer height gauges in tare 1105/1090
Axle diameter gauges for 16 Ton axle and 13 Ton axle
Bolster Spring Suspension hanger gauge 387/386/384
Tyre defect gauge
Dash pot oil level stick
Axle Box Clearance gauge
Bolster clearance gauge
SAB ‘A’ dimension gauge
SAB ‘E” dimension gauge
CAMTECH/99/M/TOOLS-WL/1.0
Hand Tools for Mechanical Artisans-Washing Line Dec’99
35
APPENDIX B
LIST OF ITEMS TO BE KEPT AT PRIMARY
EXAMINATION POINTS
Following Spares and T&P item should be kept at Primary
Examination Points:
Jacks (Screw and Bottle, at least 2 nos. each) with
Fixtures for Bolster Spring replacement.
Wooden packing
Wooden wedges
Danger boards
Master gauge (Vacuum)
Master gauge (Air pressure)
8 mm hole Test Plate
7.5 mm hole Test Plate
Set of Spanner
Hammer
Sledge Hammer
Chisel
Punch
CAMTECH/99/M/TOOLS-WL/1.0
Hand Tools for Mechanical Artisans-Washing Line Dec’99
36
Wooden plug to dummy Vacuum cylinder and clappet
valve
Lithium base grease for axle box
Iron rod to lift the luggage sliding door (bottom)
Bolster Springs of all types
Equalizing stay
Bolster Suspension Hanger
Hanger Block
Bolster Suspension Hanger Pin
Truss Bar Hanger Pin
Truss Bar Hanger
Axle Box face plate with nuts
Hose pipe complete
Syphon pipe
BP Air hose couplings
FP Air hose couplings
MU washers
Brake blocks
SAB with control rod
BP-HP couplings
Draw Bar assembly
Shock absorber with nuts and bolts
CAMTECH/99/M/TOOLS-WL/1.0
Hand Tools for Mechanical Artisans-Washing Line Dec’99
37
Guard van valve complete
Buffer face protective plate
Brake gear pins, cotters, nuts and bolts
Clappet valve washer and cap
PEASD resetting key
Middle berth chain
Push cock
Door Handle
If you have any suggestions and any specific
comments, please write to us.
Contact person : Joint Director (Mech.)
Postal address : Indian Railways,
Centre for Advanced
Maintenance Technology,
Maharajpur, Gwalior.
Pin code - 474 020
Phone : 0751- 470890, 0751-470803
Fax : 0751- 470841
To upgrade maintenance technologies and methodologies and achieve improvement in productivity and performance of all Railway assets and man power which inter-alia would cover reliability, availability, utilisation
and efficiency.
OUR OBJECTIVE