FX-C Lifting Magnetfor Handling of
Rings and Sleeves
NEW !!
FX-C lifting magnets have a round, multipole clamping surface, designed for lifting rings, sleeves, bearing hou-sings, flange plates and similar workpieces. The load specification is valid for full-surface mounting on workpieces which cover D inside to D outside (see table Dimensions), for workpieces with a smaller mounting surface an approximate maximum workpiece weight of 3.5 kg per cm² clamping surface can be calculated. For serial workpieces, a documented test should confirm the safety factor 3.
FX-C Lifting Magnets
Model Art. Nr. Dimensions (mm) Max. Load from Material thickness
(mm)
Max. Load
(kg)
Max. Load per cm2 Contact surface
(kg)
Weight(kg)
D Da-Di H Hs Bs
FX-C 175 1101 0177 120 114-40 130 138 185 10 175 3,5 7,5
FX-C 250 1101 0257 160 152-65 145 153 210 12 250 3,5 15
FX-C 450 1101 0457 250 240-100 155 168 275 15 450 3,5 35
For Sleeves
For Hubs
For housings with internal thread
Calculation example max. load for ringsContact surface of the Ring