A crlaurence.co.uk | Worldwide Manufacturer and Suppl ier
An ISO9001:2008 Certified Company
Glazing, Railing, Architectural, Construction, Industrial, and Automotive Supplies
®C.R. LAURENCE COMPANY
RESIDENTIAL UPGRADESBringing High Scale Quality to Designer Bathrooms
COMMERCIAL PROJECTSThe Choice of Many of the Finest Hotels, Resorts,and Condominium Complexes Around the World
Frameless Shower DoorHardware and Supplies
2C.R. LAURENCE COMPANY
Prima Series Hinge
Prima Hinges provide extra application possibilities. Their Top and Bottom Pivot style handles the weight of the door betterthan traditional "Side Mount" hinges, as well as allowing greater glass exposure, thus making for a more aestheticenclosure. Prima Hinges can be mounted floor and ceiling, floor and wall, floor and fixed transom, floor and adjacent panel,or floor and header for enclosures not reaching the ceiling. CRL's new Special Top Mount Prima Hinge (see below) has abuilt-in adapter plate that allows use with our EZ-Adjust Header System.
The Vienna and Cologne Series Hinges are identical internally, only distinguished by their differing plate styles. The idealhinges for wider and heavier doors, two hinges can accommodate up to a 914 mm (36") wide door weighing up to 50 kg(110 lbs.), while three hinges can accommodate up to a 914 mm (36") wide door up to 63.5 kg (140 lbs). Two strategicallyplaced steel pins allow the hinge to be used in a "mouse-ear" shaped cut-out, thus providing a non-slip safety feature. Ifit's needed to do a rectangular style cut-out, the two steel pins may be removed, allowing more adjustability. Adjustablemodels (not shown) that have up to 90 degrees adjustment to accommodate "off angles" are also available.
Standard Top andBottom Mount
Fixed TransomMount
Inline PanelMount
L-BracketWall Mount
OffsetBracket Wall
Mount
135° Glass-to-Glass Mount
Top or Bottom MountPivot with Attached
U-Clamp
Side-to-Side Adjustment
Special Top Mount Hinge (Compatible only with EZ-AdjustHeader System Shown to Left)
SPECIFICATIONSFor Glass Thickness: 8 to 10 mm (5/16" to 3/8") Toughened Safety Glass (Not Included)Construction: Solid BrassHinge Swings: Full RotationClosing Type: Self-Centering When Within 15 Degrees of Closed PositionGlass Fabrication: Cut-Out RequiredFinishes: Over 20 Stock Colours (Custom Finishes Also Available)Includes: Gaskets, Screws, Glass Fabrication DetailsNOTE: Senior Prima Hinges are Available for 12 mm (1/2") Thick Glass. Junior Prima Hinges are Available for 6 mm (1/4") Thick Glass.
Wall MountFull BackPlate
Wall MountFull BackPlate
180°Glass-to-Glass
135°Glass-to-Glass
90°Glass-to-Glass
Wall MountShort Back
Plate
Pin In Place(For "Mouse-Ears"
Cut-Out)
Pin Removed(For Square
Corner Cut-Out)
Internal View of Cologne Hinge
Vienna Series Hinge
Cologne Series Hinge
180°Glass-to-Glass
135°Glass-to-Glass
90°Glass-to-Glass
Wall MountOffset Back
Plate
Wall MountOffset Back
Plate
SPECIFICATIONSFor Glass Thickness: 10 to 12 mm (3/8" to 1/2") Toughened Safety Glass (Not Included)Construction: Solid BrassHinge Swings: 90 Degrees Inwards and OutwardsClosing Type: Self-Centering When Within 15 Degrees of Closed PositionGlass Fabrication: Cut-Out RequiredFinishes: Over 20 Stock Colours (Custom Finishes Also Available)Includes: Gaskets, Screws, Glass Fabrication Details
NEW!See Page 4for MoreDetails
3crlaurence.com | crlaurence.co.uk | crlaurence.de | crlaurence.com.au | crlaurence.ca
Geneva Series Hinge
Pinnacle Series Hinge
International Series Hinge
Geneva Hinges offer three varieties of Wall Mount Hinges, in addition to three Glass-to-Glass models. Pinnacle Hingesalso offer three styles of Wall Mount Hinges, as well as three Glass-to-Glass models. Adjustable models (not pictured here)that feature up to 90 degrees adjustment to accommodate "off angles" are also available. Geneva and Pinnacle SeriesHinges contain the same internal mechanism but offer different styles of hinge plates. Reversible pivot pins contained inthe hinge allows 5˚ door closing position option.
Our NEW International Series Hinge blends value with performance. Offered in both traditional square cornered style, orwith modern beveled edges, the International Series Hinge provides design flexibility. Wall Mount with Full Back Plate and180 Degree Glass-to-Glass Models cover the majority of popular installation configurations. The solid brass constructedInternational Series Hinge will accommodate 8 mm (5/16"),10 mm (3/8"), and 12 mm (1/2") thick toughened glass.Stocked in popular finishes of polished chrome and brushed nickel.
Wall MountFull Back Plate
180°Glass-to-Glass
135°Glass-to-Glass
90°Glass-to-Glass
Wall MountShort Back Plate
Wall MountOffset Back Plate
Wall MountFull Back Plate
Wall MountFull Back Plate
Wall MountFull Back Plate
180°Glass-to-Glass
180°Glass-to-Glass
180°Glass-to-Glass
135°Glass-to-Glass
90°Glass-to-Glass
Wall MountShort Back Plate
Wall MountOffset Back Plate
SPECIFICATIONSFor Glass Thickness: 8, 10, and 12 mm (5/16", 3/8", and 1/2"), Toughened Safety Glass (Not Included)Construction: Solid BrassHinge Swings: 90 Degrees Inwards and OutwardsClosing Type: Self-Centering When Within 10 Degrees of Closed PositionGlass Fabrication: Cut-Out RequiredFinishes: Polished Chrome and Brushed NickelIncludes: Gaskets, Screws, Glass Fabrication Dimensions
Our Most Popular Series!
NEW!
SPECIFICATIONSFor Glass Thickness: 8, 10, and 12 mm (5/16", 3/8", and 1/2"), Toughened Safety Glass (Not Included)Construction: Solid BrassHinge Swings: 90 Degrees Inwards and OutwardsClosing Type: Self-Centering When Within 15 Degrees of Closed PositionGlass Fabrication: Cut-Out RequiredFinishes: Over 20 Stock Colours (Custom Finishes Also Available)Includes: Gaskets, Screws, Glass Fabrication Details
Beveled EdgesSquare Corners
4C.R. LAURENCE COMPANY
Header-Free Shower Enclosure System
Engineered and Approved Design By CRL (Glass Not Included)
• Must Utilize CRL Established Criteria for Installing Safe Enclosure• Choose Your Own Set of Current CRL Stock Products to Install, asLong as Criteria is Followed
• Provides the "Frameless" Alternative Many Customers Demand (See crlaurence.co.uk for Criteria and Guidelines)
Typical Header-Free Design
Header-Free Enclosure Criteria• Must use 12 mm (1/2") glass on fixed panel from which the door hinges• Fixed panel from which the door hinges can’t exceed 559 mm (22") in widthor 2.134 m (84") in height
• Door can be either 10 mm (3/8") or 12 mm (1/2") glass• Door width not to exceed 762 mm (30")• Must use one type of the following brackets fastened to the vertical wall on thefixed panel from which the door hinges: GE90S, P190S, R090S or CA90S
• The same number of brackets will be used on the wall as there are glass-to-glass hinges• Only a fixed panel fastened to a vertical wall can be used to hinge from. No hinging froma fixed panel fastened to another fixed panel
• Fixed panel from which the door hinges must have valid bottom support (doesn’t have tobe same as bracket noted above)
Senior Prima SeriesFor 12 mm (1/2") Glass
Model SRPPH07
Top or Bottom Mount Pivot Hinge With Attached U-Clamp
Prima SeriesFor 8 and 10 mm(5/16" and 3/8") Glass
Model PPH07 Model CAR07
• Provides Alternative to Using Traditional HorizontalMetal Header Systems Across Enclosure
• CRL Engineered and Designed Criteria Must Be Followed for Safe Installation
• Typically Used With Standard PPH01 Pivot Hinge at Bottom of Door
• Can Also Be Mounted at Bottom of Door and Adjacent Panel for Symmetry
• Stocked in Eight Popular Finishes, With Custom Finishes Available
• Models for 8, 10, and 12 mm (5/16", 3/8", and 1/2")Thick Toughened Glass
New Top and Bottom Pivot Hinges with Attached U-Clamp answer the question that many architects, designers, andcustomers have asked, “Do I need to have a Header on my beautiful new shower enclosure"? Well, sometimes theanswer may be yes, but carefully following CRL engineered and design criteria for these hinges may allow you this alternative appearance. This combination of Hinge and U-Clamp allows the installer to mount a shower door next to an adjacent 180 degree fixed panel without a Header. The same look may be done at the bottom of the door and fixed panel,or a Standard Top and Bottom Mount Pivot Hinge may be used at the bottom of the door, with other clamps or U-Channel chosen for the bottom of the fixed panel. Stocked in eight popular finishes, with custom finishes available.Models available for 8 mm, 10 mm, and 12 mm (5/16", 3/8", and 1/2") thick toughened glass.
Chrome Satin Chrome(Matte)
Brass BrushedNickel
PolishedNickel
SatinNickel
BrushedBronze
Oil RubbedBronze
SPECIFICATIONSFor Glass Thickness: 8 to 12 mm(5/16" to 1/2") Toughened Safety Glass(Not Included)Prima and Cardiff: 8 mm and 10 mm(5/16" and 3/8") Toughened Safety GlassSenior Prima: 12 mm (1/2") ToughenedSafety GlassHinge Swings: Full RotationClosing Type: Self-Centering When Within15 Degrees of Closed PositionGlass Fabrication: Cut-Out RequiredCut-Out RequiredIncludes: Gaskets, Screws, Glass Fabrication Details
NEW!
NEW!
Cardiff SeriesFor 8 and 10 mm(5/16" and 3/8") Glass
See crlaurence.co.uk forApproved Design Criteria
See crlaurence.co.uk for Approved Design Criteria
5crlaurence.com | crlaurence.co.uk | crlaurence.de | crlaurence.com.au | crlaurence.ca
CRL Offers Over 20 Varietiesof Hinge Series in Over 20 Finishes, to Accommodate6 mm to 12 mm (1/4" to 1/2")Thick Glass, and Match MostAny Modern Bathroom Décor.A Full Line of Accessory Itemsare Also Available.
6C.R. LAURENCE COMPANY
This 'All-Glass' Restroom Partition System will modernize any commercial or institutional bathroom area with yourchoice of multiple architectural finishes. Since metal posts do not 'interrupt' the glass panels, a beautiful frameless environment is attained. The 'All-Glass' Restroom Partition System allows field adjustable height with a floating top mountappearance. No field fabrication is required, ensuring easy installation. CRL hardware is utilized for this system that is designed for use with 12 mm (1/2") thick toughened glass. Customers may incorporate several optional fixtures asneeded, such as coat hooks, toilet paper dispensers, toilet seat cover dispensers, and sanitary napkin disposal.
'All-Glass' Restroom Partition System• 'All-Glass' Look Without Post Interruption for 12 mm (1/2") Thick Glass• 51 x 76 mm (2" x 3") Stainless Steel Posts With Concealed Base Fastener• Posts Mounted Behind Glass to Maximize "Frameless" Appearance• Built Per Your Specifications• Utilizes CRL Vienna or Cologne Hinges• Doors Accommodate Slide-Bolt Latches (Sold Separately) • Allows Thru-Glass Mounted Optional Fixtures
Frameless Vertical Post Systems
• Standard or Custom Kits Allow User to Stabilize Fixed Panelsof Glass Not Going to Ceiling
• Excellent Modern Alternative to More Traditional Horizontal HeaderSystems that Run Wall-to-Wall
• Floor-to-Ceiling Mount and Two-Point Ceiling Mount Systems Available• Hinges, Fixed Panel Clamps, U-Channels, Door Pulls andOther Accessories Ordered Separately
• Four Popular Stock Finishes• For 8, 10, and 12 mm (5/16", 3/8", and 1/2") ToughenedGlass (Not Included)
• Custom Kits Available in Various Finishes and Post Configurations• Complete System Details at crlaurence.co.uk
Cottage Series SlidingShower Door Kits
• Designed for 6 mm (1/4") or 10 mm (3/8") Glass• Top Hung Design Allows for Bottom Track and SideJambs to Remain Uncluttered
• Up to Six Stock Sizes and Four Stock Finishes• Custom Units Available
SPECIFICATIONSMaterials: Extrusions (Aluminium),Towel Bar (Brass Tubing), Knob (Solid Brass)For Glass Thickness: 6 mm (1/4") or10 mm (3/8") Toughened Safety Glass (Not Included)Finishes: Four Stock Colours (Custom Finishes Available)Includes: Aluminium Extrusions, 610 mm (24") Towel Bar,Knob, Hardware Package and Installation InstructionsGlass Fabrication: Towel Bar - Two 12 mm (1/2") DiameterHoles, 610 mm (24") Centre-to-Centre; Knob - One 12 mm(1/2") Diameter Hole; Top Hangers - Four 12 mm (1/2") Diameter Holes (two per glass panel)
Two-Point Ceiling Mount SystemFloor-to-Ceiling Mount System
End View
Bottom Sill
Side Jamb
Header Clear Jamb
Towel Bar
Knob Bottom Guide
Revolutionary Cottage 'CK' Series withClear Jambs for the 'All-Glass' Look, orTraditional 'DK' Series with Metal Jambs.
Top Hanger for 10 mm
Glass
Top Hanger for 6 mmGlass
NEW!
NEW!
7crlaurence.com | crlaurence.co.uk | crlaurence.de | crlaurence.com.au | crlaurence.ca
90 Degree Wall-to-Glass Installation Uses Our 180 Degree Standard KitPlus Our 90 Degree Accessory Kit
180 Degree Wall-to-Wall InstallationUses Our 180 Degree Standard Kit
CRL Hydroslide Sliding Shower Door Kits feature the latest European ‘all-glass’ look. Kits are availablein either 1.52 m (60") or 2.13 m (84") widths. Installers can cut the width to size, and height is optional as long as the sliding door glass weighs less than 40 kg (88 lbs). The 180 DegreeWall-to-Wall Installation only requires a 180 Degree Standard Kit for the installation. The 90 DegreeWall-to-Glass Installation requires a 180 Degree Standard Kit plus a 90 Degree Wall-to-GlassAccessory Kit for the installation. Individual or replacement parts can also be ordered. Bottom Glass Attachments, Handles or Knobs must be ordered separately. Custom units are also available.
Hydroslide Sliding Shower Door Kits
• Excellent Design for Compact Areas• Low Profile Header Allows More of the 'All-Glass' Look• For 8 mm (5/16") and 10 mm (3/8") Thick Toughened Glass• Clean Sleek Lines• Quick and Easy Installation• Accommodates a Wide Range of Shower Designs• Complete Specifications Available at crlaurence.co.uk
Available in Four Standard Finishes
Chrome Brass BrushedNickel
Oil RubbedBronze
SPECIFICATIONSGlass Thickness Range: 8 mm (5/16") to 10 mm (3/8")Toughened Safety Glass: (Not Included)Materials: Plated or Lacquered Solid Brass Fittings; Anodized Aluminium Sliding Door TrackMaximum Door Weight: 40 kg (88 lbs)Fabrication: Holes Required in Fixed Panel and DoorIncludes: Gaskets, Screws, Glass Fabrication InformationComplete installation instructions along with glass and metal cutting formula available at crlaurence.co.uk
The 90 Degree Wall-to-Glass Installation requires the 180 Degree Standard Kit, plus the 90 DegreeWall-to-Glass Accessory Kit for the installation. Individual or replacement parts can also be ordered.Bottom Fixed Glass Attachments and Handles or Knobs must be ordered separately. HydroslideKits come in four finishes: Chrome Fittings with a Brite Anodized Sliding Track, Polished Brass with aBrite Gold Anodized Sliding Track, Brushed Nickel with Brushed Nickel Anodized Sliding Track, andOil Rubbed Bronze with Oil Rubbed Bronze Anodized Sliding Track. Each Kit comes with completefabrication and installation instructions.
Hydroslide Sliding Shower Door Kits were designed for full standing showers or above bathtubs.The Hydroslide System can accommodate a wide range of shower designs with fixed glass panels oneither end, or both sides at 90 or 180 degrees. The Hydroslide System also accommodates the optionof floor-to-near-ceiling glass panels with a sliding door. Hydroslide Sliding Shower Door Kits featurethe latest European 'all-glass' look. Kits are available in either 1.52 m (60") or 2.13 m (84") widths. Installers can cut the width to size, and height is optional as long as the sliding door glass weighs lessthan 40 kg (88 lbs). The 180 Degree Wall-to-Wall Installation only requires the 180 Degree Standard Kit for the installation.
*90 Degree Units require that you order one 180 Degree Standard Kit plus one 90 Degree Accessory Kit
• 1 - 90 Degree Glass-to-Sliding Track Connector• 1 - 90 Degree Wall-to-Glass Bracket
• 1 - Sliding Glass Door Upper Track• 2 - Hangers for Sliding Glass Door • 2 - Sliding Glass Door Rollers• 2 - Sliding Glass Door Roller Stops • 1 - Sliding Glass Door Floor Guide • 2 - 90 Degree Wall-to-Upper Track Connectors • 2 - 180 Degree Glass-to-Sliding Track Connectors • 1 - 914 mm (36") Half-Round SDT980 Threshold • 1 - 2489 mm (98") DK98L L-Seal for Wall
180 Degree Standard Kit consists of:
*90 Degree Wall-To-Glass Accessory Kit consists of:
• Wall Mount and Glass-to-Glass Models
• Allows Door to Bi-Fold Into Enclosure
• Work in Conjunction WithHydroslide Sliding Kits
NEW! HYDROSLIDEBI-FOLD HINGES
For more information see crlaurence.com
ONLINE FEATURES INCLUDE:• Access to All CRL Products Through CRL'sEasy-to-Use A to Z Product Index
• Fast and Secure Log On Process• Ask Technical and Product Questions Online• Find Products and Pricing Online Instantly• View All Current Catalogues Online
• Technical Articles and Product Support• Ordering and Shipping Information• Beautiful Installation Photos With CRL Products• CRL Locations With Addresses, Directions, Phone and Fax Numbers• Direct E-Mail Connections to CRL Departments• Account Policies and Credit Terms• A Calendar of Industry Trade Shows
C.R. Laurence Co., Inc.Corporate HeadquartersCRL UNITED STATES | crlaurence.com2503 E. Vernon Ave., Los Angeles, California 90058-1897Toll Free Phone: (800) 421-6144 • Toll Free Fax: (800) 262-3299International Phone: (323) 588-1281 • International Fax: (323) 581-6522
C.R. Laurence of CanadaCanadian HeadquartersCRL CANADA | crlaurence.ca65 Tigi Court, Concord, Ontario L4K 5E4Toll Free Phone: (800) 421-6144 • Toll Free Fax: (800) 262-3299International Phone: (905) 303-7966 • International Fax: (905) 303-7965
Welcome to the C.R. Laurence Global Web Site DirectoryPlease select from one of these web sites to begin your visit
CRL Master and Specialty Catalogues
AH11ARCHITECTURALHARDWARE
HR11ARCHITECTURALRAILING SYSTEMS
LP11COMMERCIAL DOOR HANDLES
AM09ARCHITECTURALMETALS
SD10FRAMELESS SHOWER DOOR HARDWARE AND SUPPLIES
GB10GLASS BONDINGSYSTEM
KCS11CRL KEY CONTROLSPECIALISTS
JK11CRL JACKSONDOOR CONTROLS
TAJ11TAJIMAARCHITECTURALMETALS
HW2010TUBULARARCHITECTURALHARDWARE
DC07COMMERCIALDOOR CONTROLS
TH10TRANSACTIONAND SECURITYHARDWARE
HS07HOSPITALITY& SERVICEHARDWARE
• 03 SEALANTS, ADHESIVES, AND FASTENERS• 23 FRAMELESS SHOWER DOOR HARDWARE• 43 AUTO GLASS TOOLS AND WINDOWS• 53 GLASS AND GLAZING HARDWARE• 63 ARCHITECTURAL HARDWARE• 73 TOOLS, MACHINERY, AND EQUIPMENT• 83 WINDOW AND DOOR REPLACEMENT HARDWARE
B2010TEMPERED GLASSDOORS, PANIC,DEADBOLT ANDDUMMY HARDWARE
M2010RAILINGS, SMOKE BAFFLES,GLASS GATES
D2010DISPLAY CASEDOOR SERIES 1301
A C.R. LAURENCE COMPANY
C.R. Laurence of Europe Ltd.European HeadquartersCRL UK | crlaurence.co.ukCharles Babbage Ave., Kingsway Business Park, Rochdale, OL16 4NW United KingdomFreephone: 00 800 0421 6144 • Freefax: 00 800 0262 3299International Phone: +44 (0) 1706 863 600 • International Fax: +44 (0) 1706 869 860
C.R. Laurence of Europe GMBHStuttgart area, GermanyCRL GMBH | crlaurence.de | crlaurence.euBoschstrasse 7, D-74360, Ilsfeld, GermanyFreephone: 00 800 0421 6144 • Freefax: 00 800 0262 3299International Phone: +49 (0)7062 915 93 15 • International Fax: +49 (0)7062 915 93 16
C.R. Laurence Australia Pty LtdAustralia HeadquartersCRL Australia | crlaurence.com.au9 Shale Place, Eastern Creek, NSW 2766Toll Free Phone: 1800-424-275 • Toll Free Fax: 1800-813-013International Phone: +61 (2) 9851-3444 • International Fax: +61 (2) 9851-3445 A
VDB4034-8/10/_UK