Download - FOOD CHEMISTRY FSTC 312/313, 3+1 Credits
FOOD CHEMISTRYFSTC 312/313, 3+1 Credits
Instructor: Dr. Steve TalcottOffice: 220F Centeq APhone: 862-4056E-mail: [email protected]
IFT Definition of Food Science
Food science is the discipline in which biology, chemistry, physical sciences and engineering are used to study:
The nature of foods
The causes of their deterioration
The principles underlying food processing.
www.ift.org
Food Science: An Interdisciplinary Field of Study
Food Science
Microbiology
Engineering
Biology
Physics
Chemistry
Nutrition
Dimensions of Food Science and Technology
•Food processing and manufacture
•Food preservation and packaging
•Food wholesomeness and safety
•Food quality evaluation
•Food distribution
•Consumer food preparation and use
Other Components
Growing/HarvestingPackagingMarketing/RetailFood ServiceConsumer Services
Components of Food ScienceFood ChemistryFood MicrobiologyFood ProcessingRegulationsNutritionOthers
Food ChemistryBasis of food science
Water Carbohydrates Proteins Lipids Micronutrients Phytochemicals Others
Lipids in PeanutsOpened jar peanut butter: chemical reaction
in the oil phase Oxidation of the unsaturated fatty acids in
the peanut oil results in production of a rancid odor.
Peanut butter represents a special food system called an emulsion
H H H HC C C CH H
oxygen
Hydrocarbon chain
Solutions and Emulsions
Droplets of dispersed phasewithin the continuous phase
Solutions are homogeneous mixtures in which soluteparticles are small enough to dissolve within solvent
Solute examples: salt, sugar, vitamin C, other small solid particles
Solute liquid examples: water, ethanol; gas examples: CO2
Dispersions (colloidal dispersions) are mixtures in whichsolutes do not dissolve (too large)
Examples of colloids milk protein (casein)egg white protein (albumen)gelatin proteinpectin polysaccharideCa and Mg (minerals)MILK
What is an emulsion?
Mixture of two immiscible liquids
oil H2OSurface tension acts to keep the liquidsfrom mixing
Result: oil “sits” ontop of the water phase
Stable food emulsions = addition of emulsifierslecithin, sucrose esters, MAG, DAG, etc are “amphiphiles”
O/Wemulsion
W/Oemulsion
milkice creammayo
Margarinebutter
Foods Are Made of ChemicalsSingle elementsChemically bonded elements (compounds)
Electrons Distributed via Energy Layers
Common Chemical Bonds in Foods
Covalent Sharing 1 or more pairs of electrons Very strong bonds, not easily broken in foods C-C or C=C bonds
Ionic Filling of orbitals through the transfer of electrons Cations (+) and Anions (-); Na+ + Cl- => NaCl
Hydrogen Compounds containing O or N with bound hydrogen Very weak bonds; C-H or N-H
Functional Groups in Foods
Exams and Grading 3 hourly exams Material is not “cumulative”, but material will build
upon itself. Multiple choice, short answer, short essay format
2 class assignments Short term paper Literature review Topic of special interest etc
Several announced or unannounced quizzes Beginning or end of class University excused absence policy will be followed
The “Basics” of Food Chemistry
Functional Groups in Foods
SOME FOOD MOLECULESimportant in food chemistry
H – O – H O = C = O CH3 – COOH
Na H CO3 C6H12O6 NaCl
NH2 – CH2 - COOH CH3 – (CH2)n - COOH
SOME FOOD MOLECULESimportant in food chemistry
WATER carbon dioxideacetic acid
sodium bicarbonate glucose sodium chloride
The amino acid“glycine”
generalstructure of a
fatty acid
A Few Food Functional Groups:
ACID GROUP: “carboxylic acid” COOHacids donate (lose) protons
COOH COO(-) + H(+)
This means acids form ions (charged species) anion has (-) chargecation has (+) charge
Vinegar contains acetic acid CH3COOH
Tartaric acid found in grapes is a di-carboxylic acid – what does this mean? Citric acid is tri-carboxylic acid.
AMINO GROUP: NH2
Derived from ammonia (NH3)
Amines are “basic” – means they gain protons
methyl amine: CH3 – NH2
trimethylamine is found in fish, and is responsible for “fishy odor”
CH3 – CH – COOH Alanine, an amino acid
NH2
Alcohol group - OH “hydroxyl group”
Methyl alcohol = methanol: CH3- OH
Ethanol C2H5OH is produced during the fermentation
of sugars; it is water-soluble and is called “grain alcohol”because it is obtained from corn, wheat, rice, barley,and fruits.
Yeasts use sugars for food – they ferment simple carbohydrates and produce ethanol and CO2:
STARCH hydrolysis C6H12O6 2 C2H5OH + 2 CO2Glucose Ethanol Carbon
Dioxide
Other food molecules that contain OH groups: cholesterol (a lipid), tocopherol (a vitamin), retinol (a vitamin), & calciferol (a vitamin)
Aldehyde group - CHO
There is actually a double bond between two atoms in this group:
- C – H formaldehyde HCHO: H – C – H
O O
Aldehydes can be formed from lipid oxidation, and generally have very low sensory thresholds. For example, fresh pumpkin has the smell of acetaldehyde; fresh cut grass the small of hexenal.
We have already talked generally about covalent, ionic, and hydrogen bonds:
There are 3 other important bonds in foods:
(1) An ester bond (linkage) in lipids
(2) A peptide bond (linkage) in proteins
(3) A glycosidic bond (linkage) in sugars
Covalent: Sharing of electrons, strong bonds, C-C or C=C bondsIonic: Transfer of electrons, NaClHydrogen: Weak bonds with O or N with bound hydrogen
An ester bond (linkage) in lipids:
O
Glycerol C O fatty acid
In food fats, fatty acids are attached to glycerol molecules, through what is called an ester linkage
Ester linkage“Acyl” linkage
Glycerol is a small molecule, containing only 3 carbons
But, to each carbon atom of glycerol, one fatty acid can attach, via an ester bond.
A mono-, di-, or tri-esterified fatty acid to a glycerol is:
A MONOACYLGLYCEROL. A fat molecule that has ONE fatty acid attached (“esterified”) to glycerol.
A DIACYLGLYCEROL. A fat molecule that has TWO fatty acids esterified to glycerol.
A TRIACYLGLYCEROL. A fat molecule that has THREE fatty acids esterified to glycerol.
Glycerol
H
H – C – O H
H – C – O H
H – C – O H
H
H O
H – C – O – C - (CH2)n – CH3
H – C – O H
H – C – O H
H
Ester
“I’m a fatty acid chain”
a monoglyceride
What do peptide bonds (linkages) in proteins look like?
Amino acid Amino acid. . . repeat
In food proteins, or “polypeptides”, individual amino acids are attached to each other through what is called a peptide linkage
Peptide linkage
AMINO ACIDS contain both the amino (NH2) and the acid (COOH) group in their structure.
In the formation of a peptide bond, one of the amino acids loses one H atom, and the other loses O and H.
Acid group of the amino acid
NH2 NH2C – C - O – H -------------
OH
“R”R is anySide chain
C – C - O – H
H
“R”
O
Amino group
The formation of peptide bond
N-C-C-N
A glycosidic linkage in sugars connects sugar units into larger structures
glucose glucoseO
MALTOSE, a disaccharide composed of 2 glucose units
Glycosidic linkage
Structures of sugar disaccharides
Alpha 1,4 glycosidicbond
Alpha 1,4 glycosidicbond
Beta 1,4 glycosidicbond
Polymeric Linkages
OCH 2 OH
OHO
OH
Cellulose
OCH 2 OH
OHO
OH
Amylose
Beta 1,4 LinkageIndigestible
Alpha 1,4 LinkageDigestible
Organic Acids in Foods
Application of functional groups
Acids in FoodsOrganic acidsCitric (lemons), Malic (apples), Tartaric
(grapes), Lactic (yogurt), Acetic (vinegar)Food acids come in many forms, however:
Proteins are made of amino acids Fats are made from fatty acids Fruits and vegetables contain phenolic acids
Organic acids are characterized by carboxylic acid group (R-COOH); not present in “mineral acids” such as HCl and H3PO4
Chemical Structures
ofCommonOrganic
Acids
Acids in FoodsAdd flavor, tartnessAid in food preservation by lowering pHAcids donate protons (H+) when dissociatedStrong acids have a lot of dissociated ionsWeak acids have a small dissociation constantAcids dissociate based on pHAs the pH increases, acid will dissociatepKa is the pH equilibrium between assoc/dissoc
Titration Curve for Acetic Acid
Acids in FoodsWeak acids are commonly added to foodsCitric acid is the most commonWhen we eat a food containing citric acid, the
higher pH of our mouth (pH 7) will dissociate the acid, and giving a characteristics sour flavor
pH and Titratable AciditypH measures the amount of dissociated ionsTA measures total acidity (assoc and dissoc)The type of food process is largely based on pH
They also have other roles in food Control pH Preserve food (pH 4.6 is a critical value) Provide leavening (chemical leavening) Aid in gel formation (i.e. pectin gels) Help prevent non-enzymatic browning Help prevent enzymatic browning Synergists for antioxidants (for some, low pH is good) Chelate metal ions (i.e. citric acid) Enhance flavor (balance sweetness)
Acids in Foods In product development you can use one
acid or a combinations of acids
-flavor -functionality - synergy - Naturally occurring blends - Food additives
Acidity is important chemically
-Denaturation and precipitiation of proteins
-Modify carbohydrates and hydrolysis of complex sugars
-Hydrolysis of fatty acids from TAG’s Generally under alkaline conditions
Inversion of sugars (sucrose to glu + fru)
Functional Groups and Bonds Acids Amino Alcohol Aldehydes
Ester Peptide Glycosidic
Application: Organic Acids Control pH Preserve food (pH 4.6 is a critical value) Provide leavening (chemical leavening) Aid in gel formation (i.e. pectin gels) Help prevent non-enzymatic browning Help prevent enzymatic browning Synergists for antioxidants (for some, low pH is good) Chelate metal ions (i.e. citric acid) Enhance flavor (balance sweetness)
Acidity is important chemically
Denaturation and precipitiation of proteins
Modify carbohydrates and hydrolysis of complex sugars
Hydrolysis of fatty acids from TAG’s Generally under alkaline conditions
Inversion of sugars (sucrose to glu + fru)
Chemical Reactions in Foods
(1) Enzymatic(2) Non-enzymatic
Generically applied to:Carbohydrates
LipidsProteins
CARBOHYDRATE chemical reactions:
Enzymatic browningNon-enzymatic browningHydrolysisFermentationOxidation/reductionStarch gelatinization
PROTEIN chemical reactions:
BufferingNon-enzymatic browningHydrolysisCondensationOxidationDenaturationCoagulation
LIPID chemical reactions
OxidationHydrolysisHydrogenation
Chemical Bonds to Chemical Rxns
Chemical Reactions in FoodsEnzymatic
Enzymes are proteins that occur in every living system Enzymes can have beneficial and detrimental effects
Bacterial fermentations in cheese, pickles, yogurt Adverse color, texture, flavor, and odor
High degree of specificity (Enzyme – Substrate)
Non-enzymatic Those reactions that do not require enzymes Addition, redox, condensation, hydrolysis
The Active Site of the ES Complex
sucrose glucoseglucose + fructosefructosesucrase
“invertase”
Enzyme ReactionsEnzymatic reactions can occur from
enzymes naturally present in a foodOr as part of food processing, enzymes are
added to foods to enable a desired effectEnzymes speed up chemical reactions (good
or bad) and must be controlled by monitoring time and temperature.
Typically we think of enzymes as “breaking apart” lipids, proteins, or carbs; but ther are are several enzyme categories
Enzyme Class Characterizations
1. Oxidoreductase1. Oxidation/reduction reactions
2. Transferase1. Transfer of one molecule to another (i.e. functional groups)
3. Hydrolase1. Catalyze bond breaking using water (ie. protease, lipase)
4. Lyase1. Catalyze the formation of double bonds, often in
dehydration reations5. Isomerase
1. Catalyze intramolecular rearrangement of molecules6. Ligase
1. Catalyze covalent attachment of two substrate molecules
Common Enzyme Reactions (some reactions can also occur without enzymes)
HYDROLYSIS Food molecules split into smaller products, due to the
action of enzymes, or other catalystscatalysts (heat, acid) in the presence of water
OXIDATION / REDUCTION: Reactions that cause changes in a food’s chemical
structures through the addition or removal of an electron (hydrogen). Oxidation is the removal of an electron Reduction is the addition of an electron
Oxidation vs Oxidized
The removal of an electron is oxidation (redox reactions). When a food system is oxidized, oxygen is added to an active
binding site For example, the result of lipid oxidation is that the lipid may
become oxidized.
In the food industry, we common speak of “oxidizing agents” versus “reducing agents”. Both are used in foods.
Reducing agents are compounds that can donate an electron in the event of an oxidation reaction. L-ascorbic acid is an excellent reducing agent as are most antioxidants
Oxidizing agents induce the removal of electrons Benzoyl peroxide is commonly added to “bleached” wheat flour
Lets put Enzymes and Chemical Reactions into Perspective
Enzymes Living organisms must be able to carry out chemical reactions
which are thermodynamically very unfavorable Break and/or form covalent bonds Alter large structures Effect three dimensional structure changes Regulate gene expression
They do so through enzyme catalysis A common biological reaction can take place without
enzyme catalysis …but will take 750,000,000 years
With an enzyme….it takes ~22 milliseconds Even improvement of a factor of 1,000 would be good
Only 750,000 years Living system would be impossible
Effect of Enzymes
A bag of sugar can be stored for years with very little conversion to CO2 and H2O
This conversion is basic to life, for energy When consumed, it is converted to chemical energy
very fast Both enzymatic and non-enzymatic reactions
Enzymes are highly specialized class of proteins: Specialized to perform specific chemical reactions Specialized to work in specific environments
Enzymes• Food quality can be changed due to the activity of
enzymes during storage or processing• Enzymes can also be used as analytical indicators to
follow those changes
• Enzyme-catalyzed reactions can either Enzyme-catalyzed reactions can either enhanceenhance or or deterioratedeteriorate food quality food quality
• Changes in color, texture, sensory propertiesChanges in color, texture, sensory properties
Enzyme Applications in the Food Industry
Carbohydrases: making corn syrup from starchProteases: Meat tenderizersLipases: Flavor production in chocolate and cheese
Pectinases Glucose oxidase Flavor enzymes Lipoxygenase Polyphenol oxidase Rennin (chymosin)
Water in Foods
Water Content of Foods Tomatoes, lettuce -- 95% Apple juice, milk -- 87% Potato -- 78% Meats -- 65-70% Bread -- 35% Honey -- 20% Rice, wheat flour -- 12% Shortening -- 0%
HO H
OHH
Water Works
Water must be “available” in foods for the action of both chemical and enzymatic reactions.
The “available” water represents the degree to which water in a food is free for: Chemical reactions Enzymatic reactions Microbial growth Quality characteristics
Related to a simple loss of moisture Related to gel breakdown Food texture (gain or loss)
Water Works Very important (#1 ingredient in many foods) Structure
Polar nature, hydrogen bonding
Can occur in many forms (S,L,V) Acts as a dispersing medium or solvent
Solubility Hydration
Emulsions Gels Colloids
Water Works The amount of “free” water, available for these reactions
and changes is represented by Water Activity. As the percentage of water in a food is “bound” changing
from its “free” state, the water activity decreases Water Activity is represented by the abbreviation: Aw
Aw = P/ Po P = Vapor pressure of a food Po = Vapor pressure of pure water (1.0)
Vapor pressure can be represented as equilibrium RH
Is based on a scale of 0.0 to 1.0 Any food substance added to water will lower water
activity….so, all foods have a water activity less than 1.0
Water
Free vs. boundWater activity (Aw)
Measured by vapor pressure of food This value is directly correlated to the growth of
microorganisms and the chemical reactions
Free water (capillary water or Type III) Water that can be easily removed from a food Water that is responsible for the humidity of a food Water from which water activity is measured
Bound water (adsorbed or Type II) Water that is tied up by the presense of soluble solids Salts, vitamins, carbohydrates, proteins, emsulifiers, etc.
Water of hydration (Structured or Type I) Water held in hydrated chemicals
Na2SO4 . 10H2O
3 Forms of Water
Water Sorption Isotherm
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
Type IHydration
Type IIAbsorbed
Type IIIFree
Moi
stur
e C
onte
nt
Water Activity
Moisture
Content Is
otherm
Water Sorption Isotherm
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
Type IHydration
Type IIAbsorbed
Type IIIFree
Moi
stur
e C
onte
nt
Rel
ativ
e R
eact
ivit
y
Water Activity
Lipid ox
idatio
n
NEB
Enzyme activity
Molds
Yeast
MO
Moisture
Content Is
otherm
Moisture sorption isotherm (MSI)
How to Use the IsothermMoisture sorption isotherms Shows the relationship between water activity and moisture at a
given temperature (the two are NOT equivalent)
Represent moisture content at equilibrium for each water activity
Allow for predictions in changes of moisture content and its potential effect on water activity
If the temperature is altered, then the relationships can not be compared equivalently
Each reaction is governed by its own temperature-dependence Acid hydrolysis reactions are faster at high temperatures Enzyme-catalyzed reactions cease to function at high temperatures
Influences on Water Activity
Foods will naturally equilibrate to a point of equilibrium with its Foods will naturally equilibrate to a point of equilibrium with its environmentenvironment
Therefore, foods can Therefore, foods can adsorbadsorb or or desorbdesorb water from the environment water from the environment DesorptionDesorption is when a “wet” food is placed in a dry environment
Analogous to dehydration; but not the same Desorption implies that the food is attempting to move into equilibrium (ie. in a
package) Dehydration is the permanent loss of water from a food In both cases, the Aw decreases
Desorption is generally a slow process, with moisture gradually decreasing until it is in equilibrium with its environment.
Adsorption is when a “dry” food is placed in a wet environmentAdsorption is when a “dry” food is placed in a wet environment As foods gain moisture, the Aw increases The term “hygroscopic” is used to describe foods or chemicals that absorb
moisture A real problem in the food industry (lumping, clumping, increases rxn rates)
Water Activity in PracticeBacterial growth and rapid deterioration
High water activity in meat, milk, eggs, fruits/veggies
1.0-0.9Yeast and mold spoilage
Intermediate water activity foods such as bread and cheese
0.75-0.9Analogous to a pH < 4.6, an Aw < 0.6 has the
same preservation effect
Aw in Low Moisture Foods
Water activity and its relationship with moisture content help to predict and control the shelf life of foods.
Generally speaking, the growth of most bacteria is inhibited at water activities lower than 0.9 and yeast and mold growth prevented between 0.80 and 0.88.
Aw also controls physiochemical reactions. Water activity plays an important role in the
dehydration process. Knowledge of absorption and desorption behavior is useful for designing drying processes for foods.
How to “Control” water The ratio of free to bound water has to be altered You can either remove water (dehydration or
concentration) Can change the physical nature of the food Alter is color, texture, and/or flavor
Or you can convert the free water to bound water Addition of sugars, salts, or other water-soluble agents
You can freeze the food This immobilizes the water (and lowers the Aw) However, not all foods can be or should be frozen Frozen foods will eventually thaw, and the problem persists
Water Water contains intramolecular polar covalentpolar covalent bonds Effects
Boiling point Freezing point Vapor pressure
Easy formation of H bondsH bonds with food molecules
Properties of WaterThe triple point is the temperature and pressure at
which three phases (liquid, ice, and vapor) coexist at equilibrium, and will transform phases small changes in temperature or pressure.
The dashed line is the vapor pressure of supercooled liquid water.
Chemical and functional properties of waterChemical and functional properties of water
Solvation, dispersion, hydrationWater activity and moistureWater as a component of emulsionsWater and heat transferWater as an ingredient
Freezing Foods
Controlling Water
FreezingGreatly influenced the way we eatFreezing curvesWater Freezes “Pure”
Frozen FoodsMust be super-cooled to below 0°C Crystal nucleation beginsTemperature rises to 0°C as ice forms
Freezing Foods
0
5
10
15
20
25
30
35
40
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30
Freezing Time
Tem
pera
ture
Super-cooling
Freezing Point
Latent heat of Crystallization
Freezing
Freezing FoodRequire lower temp. to continue freezingLast portion of water is very hard to freezeUnfrozen water is a problem
***As long as unfrozen water is present in a food, the temperature will remain near 0°C due to the latent heat of crystallization.
Freezing
Quality changes during freezingConcentration effect = small amount of
unfrozen waterExcess solutes may precipitateProteins may denaturepH may decreaseGases may concentrate (i.e. oxygen)
Freezing
Quality changes during freezing Damage from ice crystals
Puncture cell membranes
Large crystals cause more problems
Fast freezing much more desirableLess concentration effectSmaller ice crystals
Freezing
Final storage temperature -18°C is standardSafe microbiologicallyLimits enzyme activityNon-enzymatic changes are slowCan maintain fairly easilyGood overall shelf-life
Freezing
Intermittent thawingPartial thawing, then refreezingComplete thawing does not have to occurGet concentration effectGet larger ice crystals as water re-freezes
Freezing
Factors determining freezing rate:Food compositionFat and air have low thermal conductivity,
slow down freezingThis is a “buffering” effect.
Freezing
Ways to speed up freezingThinner foods freeze fasterGreater air velocity More intimate contact with coolantUse refrigerant with greater heat capacity
High Pressure Effects-Speeding it Up Freezing is regarded as one of the best methods for long
term food preservation. The benefits of this technique are primarily from low
temperatures rather than ice formation.
The application of pressure lowers the melting point of ice.
About 0.55ºC per 80 atm of pressure down to about -22ºC at 2,700 atm.
Pressure (and friction) help ice to melt under the blades of ice skates.
Potential applications in cryonics
Increase pressure to 2,000 atm (get really cold)
Suddenly increase pressure to >20,000 atm
Results: Frozen so fast that ice crystals will not form
Pressure (Atm) Freezing Pt (C)
1 0
1,000 -10
2,045 -22
3,420 -17
6,160 0
7,390 10
9,800 25
13,970 50
23,000 100
36,500 175
Freezing Foods Freezing can be damaging to food systems To reduce the chemical and mechanical damage to food systems
during freezing, technologies have been developed to freeze foods faster or under high pressures. Benefits include: Higher density ice (less “space” between crystals from air or solids) Increased rate of freezing Smaller ice crystal formation Uniform crystal formation
HP freezing generally involves cooling an unfrozen sample to -21C under high pressures (300MPa) causing ice formation to occur. 1 MPa ~ 145 psi or ~10 atm
Another method involves pressure shift freezing where the food is cooled under high pressures without causing freezing. Once the pressure is released, the sample freezes instantly.
Dehydration and Concentration of Foods
Controlling Water
Dehydration and Concentration
Factors affecting drying ratesSurface areaTemperatureAir velocityHumidityPressure (vacuum)Solute concentrationAmount of free and bound water
Drying Curve of a Food
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
0 1 2 3 4 5 6 7 8 9 10 11 12
Time (Hrs)
Moi
stur
e C
onte
nt Water that is easily removed
Water that is difficult to remove
Dehydration and Concentration
Quality changesBrowningEnzymes - sulfite will preventCarmelization - lower temps. will limitMaillard reaction - reaction of sugars and
amino acids - lower temps will limit Acrylamide…???
Flavor changes
Methods of Drying
Air drying methods Cabinet Tunnel
Concurrent flow Countercurrent flow
Continuous Fluidized bed Spray Drum
Carbohydrates in Foods
A general overview
Classifications for the main categories of food carbohydrates are based on their degree of polymerization.
CARBOHYDRATES
Types of Carbohydrates
CARBOHYDRATES Carbohydrates are carbon compounds that contain many
hydroxyl groups. The simplest carbohydrates also contain either an aldehyde
(these are termed polyhydroxyaldehydes) or a ketone (polyhydroxyketones).
All carbohydrates can be classified as either monosaccharides, disaccharides, oligosaccharides or polysaccharides.
An oligosaccharide is anywhere from about two to ten monosaccharide units, linked by glycosidic bonds.
Polysaccharides are much larger, containing hundreds of monosaccharide units.
The presence of the hydroxyl groups (–OH) allows carbohydrates to interact with the aqueous environment and to participate in hydrogen bonding, both within and between chains.
CARBOHYDRATES
SUGARS contain 2 important and very reactive Functional groups: -OH (hydroxyl group)
Important for solubility and sweetness -C=O (carbonyl group)
Important for reducing ability and Maillard browning
GLUCOSE is an ALDOSE sugar with one C atom external to the 6-membered ring
FRUCTOSE is a KETOSE hexose with two carbon atoms external to the 6-membered ring
Monosaccharides
The monosaccharides commonly found in foods are classified according to the number of carbons they contain in their backbone structures.
The major food monosaccharides contain six carbon atoms.
Carbohydrate Classifications Hexose = six-carbon sugarsGlucose, Galactose, Fructose
Fischer Projection of a-D-Glucose
Haworth Projection of a-D-Glucose
Chair form of a-D-Glucose
Sucrose: prevalent in sugar cane and sugar beets, is composed of glucose and fructose through an α-(1,2) glycosidic bond.
Disaccharides Bonds between sugar units are termed glycosidic bonds,
and the resultant molecules are glycosides. The linkage of two monosaccharides to form
disaccharides involves a glycosidic bond. The important food disaccharides are sucrose, lactose, and maltose.
Lactose:
is found exclusively in the milk of mammals and consists of galactose and glucose in a β-(1,4) glycosidic bond.
Maltose:
Is the major degradation product of starch, and is composedof 2 glucose monomers in an α-(1,4) glycosidic bond.
Polysaccharides Most of the carbohydrates found in nature occur in the
form of high molecular weight polymers called polysaccharides.
The monomeric building blocks used to generate polysaccharides can be varied; in all cases, however, the predominant monosaccharide found in polysaccharides is D-glucose.
When polysaccharides are composed of a single monosaccharide building block, they are termed homopolysaccharides.
Starch
Starch is the major form of stored carbohydrate in plant cells.
Its structure is identical to glycogen, except for a much lower degree of branching (about every 20-30 residues).
Unbranched starch is called amyloseBranched starch is called amylopectin.
FUNCTIONAL PROPERTIES OF CARBOHYDRATES
Reducing sugars Browning reactions (caramelization and Maillard) Sweetness and flavors Crystallization Humectancy Inversion Oxidation and reduction Texturizing Viscosity Gelling (gums, pectins, other hydrocolloids) Gelatinization (Starch)
Aldose (aldehyde) and Ketose (ketone)
Properties of GlucoseC1 of glucose is the carbonyl carbonGlucose has 4 chiral centers
Non-super-imposable on its mirror imageCarbons 2, 3, 4, 5 are chiral carbons
The carbonyl carbon (C1) is also the site of many reactions involving glucose They have two enantiomeric forms, D and
L, depending on the location of the hydroxyl group at the chiral carbons.
Sugar Reactions
Reduction of Monosaccharide
In this reaction the carbonyl group is reduced to an alcohol by a metal catalyzed reaction of hydrogen gas under pressure.
Sugar Alcohols
Not commonly found in nature Generally lower in calories (2 to 3 kcal/g) A CHO for labeling purposes Not digested by oral bacteria “does not promote tooth decay”
– Xylitol (from xylose) – Sorbitol (from glucose) – Mannitol (from mannose) – Lactitol (from lactose) – Maltitol (from maltose)
Sugar Sweetness
Fructose 173
Sucrose 100
Xylitol 100
Glucose 74
Sorbitol 55
Mannitol 50
Maltose 32
Lactose 15
Sweetness is but one of a varietyof functional characteristics ofimportance in food chemistry,food product development, and product quality
Functionality
FUNCTIONAL PROPERTIES OF CARBOHYDRATES
Reducing sugars Browning reactions (caramelization and Maillard) Sweetness and flavors Crystallization Humectancy Inversion Oxidation and reduction Texturizing Viscosity Gelling (gums, pectins, other hydrocolloids) Gelatinization (Starch)
Where does sucrose come from?
Sucrose
Invert sugar Invert sugar is a liquid carbohydrate sweetener in which
all or a portion of the sucrose present has been inverted: The sucrose molecule is split and converts to an equimolar
mixture of glucose and fructose.
Invert sugars have properties from sucrose; they help baked goods retain moisture, and prolong shelf-life.
Candy manufacturers use invert sugar to control graining.
Invert sugar is different from high fructose sweeteners
SUCROSE + invertase enzymeinvertase enzyme glucose + fructose
Corn syrups Corn syrupsCorn syrups are manufactured by treating corn starch
with acids or enzymes. Corn syrups, used extensively by the food industry and
in the home kitchen, contain primarily glucose (dextrose) but other sugars as well.
High-fructose corn syrup (High-fructose corn syrup (HFCSHFCS)) is made by treating dextrose-rich corn syrup with enzymes (isomerase).
The resulting HFCS is a liquid mixture of dextrose and fructose used by food manufacturers in soft drinks, canned fruits, jams and other foods.
HFCS contains 42, 55, 90 or 99 percent fructosefructose.
PROCESSING OF CORN STARCH HFCS
Corn starch is treated with α-amylaseα-amylase, of bacterial origin, to produce shorter chains of sugars (dextrins) as starch fragments.
Next, an enzyme called glucoamylaseglucoamylase, obtained from the fungus Aspergillus niger, breaks the fragments down even further to yield the simple sugar glucose.
A third enzyme, glucose isomeraseglucose isomerase, is expensive, and converts glucose to varous amounts of frutose. HFCS-55 has the exact same sweetness intensity as sucrose (cola) HFCS-42 is less sweet, used with fruit-based beverages and for baking
Glucose isomerase is so expensive that it is commonly immobilized on a solid-based “resin” bead and the glucose syrup passed over it. Can be used many times over before it slowly looses its activity.
HFCS HFCS is selected for different purposes.
Selection is based on specific desired properties:
Retain moisture and/or prevent drying out Control crystallization Produce a higher osmotic pressure (more molecules in solution) than
for sucrose Control microbiological growth
Provide a ready yeast-fermentable substrate Blend easily with sweeteners, acids, and flavorings Provide a controllable substrate for browning and Maillard reaction. Impart a degree of sweetness essentially = to invert liquid sugars
High sweetness Low viscosity Reduced tendency toward crystallization Costs less than liquid sucrose or corn syrup blends Retain moisture and/or prevent drying out of food product
HFCS
HFCS has the exact same sweetness and taste as an equal amount of sucrose from cane or beet sugar. Despite being a more complicated process than the manufacture of sugar, HFCS is actually less costly.
It is also very easy to transport, being pumped into tanker trucks.
Two of the enzymes used, α-amylase and glucose-isomerase, are genetically modified to make them more thermostablethermostable.
This involves exchanging specific amino acids in the primary sequence so that the enzyme is resistant to unfolding or denaturing.
This allows the industry to use the enzymes at higher temperatures without loss of activity.
Starch
Starches- #1 Hydrocolloid
Hydrocolloids are substances that will form a gel or add viscosity on addition of water.
Most are polysaccharides and all interact with water.
The most common is starchstarch
Starch is a mixture of amylose and amylopectin.
The size distribution of these hydrocolloids is the most important factor in the texture and physical features of foods
STARCHPolymers of glucoseAMYLOSE linear chain of glucose
Glucose polymer linked α-1,4
AMYLOPECTIN branched polymer of glucose
Amylose
Amylopectin
AMYLOSELinear polymer of glucoseα 1 - 4 linkagesDigestable by humans (4 kcal/g)250-350 glucose units on averageCorn, wheat, and potato starch
~10-30% amylose
AMYLOPECTINBranched chain polymer of glucoseα 1 - 4 and α 1 - 6 glycosidic linkagesFully digestable by humans1,000 glucose units is common
Branch points every ~15-25 units
Starch
Amylopectin (black) Amylose (blue)
Modified Starches
Gelatinization is the easiest modification Heated in water then dried.
Acid and/heat will form “dextrins” α-Amylase
hydrolyzes α (1-4) linkage random attack to make shorter chains
β-Amylase Also attacks α (1 - 4) linkages Starts at the non-reducing end of the starch chain Gives short dextrins and maltose
Both enzymes have trouble with α (1 - 6) linkages
DEXTRINS are considered to be hydrolysis productshydrolysis products ofincompletely broken down starch fractions
Polysaccharide Breakdown Products
What’s the difference between…? Maltose Maltitol Maltodextrins Dextrins Dextrans
Maltose = glucose disaccharide Maltitol = example of a “polyol” Maltodextrins = enzyme converted starch fragments
DextrDextriinsns = starch fragments (α-1-4) linkages produced by hydrolysis of amylose
DextrDextraansns = polysaccharides made by bacteria and yeast metabolism, fragments with mostly α (1 - 6) linkages
Maltodextrins and enzyme-converted starch:
STARCHSTARCH fermentation SUGARS
ETHANOL
MODIFIED STARCHESMODIFIED STARCHES
GELATINIZED STARCHGELATINIZED STARCH alpha amylase Maltodextrins
Corn Syrups
Sugars
The smaller the size of the products in these reactions, the higher the dextrose equivalence (DE), and the sweeter they are
Starch DE = 0 Glucose (dextrose) DE = 100
Maltodextrin (MD) DE is <20
Corn syrup solids (CS) DE is >20
Low DE syrup alpha amylase MD beta amylase High DESyrup
Hydrocolloids
Binding water with carbohydrates
“Gums”
“Vegetable gum” polysaccharides are substances derived
from plants, including seaweed and various shrubs or trees, have the ability to hold water, and often act as thickeners, stabilizers, or gelling agents in various food products.
Plant gums - exudates, seeds
Marine hydrocolloids - extracts from seaweeds
Microbiological polysaccharides - exocellular polysaccharides
Modified, natural polysaccharides
FUNCTIONS IN FOOD Gelatin Viscosity Suspension Emulsification and stability Whipping Freeze thaw protection Fiber (dietary fiber)
Gut health Binds cholesterol
STRUCTURAL CONSIDERATIONS
Electrical charge, pH sensitive Interactions with oppositely charged molecules Salts Low pH effects
Chain length Longer chains are more viscous
Linear vs Branched chains Inter-entangled, enter-woven molecules
Gums GUAR (Guran Gum)
Most used, behind starch, low cost Guar bean from India and Pakistan Cold water soluble, highly branched galactomannan Stable over large pH range, heat stable Thickening agent, not a gel Often added with xanthan gum (synergistic)
XANTHAN Extracellular polysaccharide from Xanthomonas campestris
Very popular, inexpensive from fermentations Forms very thick gels at very low concentrations
GumsLOCUST BEAN
Branched galactomannan polymer (like guar), but needs hot water to solubilize
Bean from Italy and Spain Jams, jellies, ice cream, mayonnaise
SEAWEED EXTRACTSCarrageenans (from red seaweed)
Kappa (gel) Iota (gel) Lambda (thickener only) Milk, baking, cheese, ice cream
AgarAlginates
“Structural” Polysaccharides
CellulosePolymer of glucose linked ß-1,4
HemicelluloseSimilar to celluloseConsist of glucose and other monosaccharides
Arabinose, xylose, other 5-carbon sugars
PectinPolymer of galacturonic acid
MODIFIED CELLULOSESChemically modified celluloseDo not occur naturally in plantsSimilar to starch, but β-(1,4) glycosidic bondsCarboxymethyl cellulose (CMC) most common
Acid treatment to add a methyl group Increases water solubility, thickening agent Sensitive to salts and low pH
Fruit fillings, custards, processed cheeses, high fiber filler
PECTINS Linear polymers of galacturonic acid
Gels form with degree of methylation of its carboxylic acid groups
Many sources, all natural, apple and citrus pomace
Susceptible to degrading enzymes Polygalacturonase (depolymerize) Pectin esterases (remove methyl groups)
Longer polymers, higher viscosity Lower methylation, lower viscosity Increase electrolytes (ie. metal cations), higher viscosity pH an soluble solids impact viscosity
PECTIC SUBSTANCES: cell cementing compound; fruits and vegetables; pectin will form gel with appropriate concentration, amount of sugar and pH.
Basic unit comprised of galacturonic acidgalacturonic acid.
Composition: polymer of galacturonic acids; may be partially esterifiedesterified.
Pectic Acid
Pectin Molecule
Pectins Pectins are important because they form gelsgels
Mechanism of gel formation differs by the degree of esterification (DE) of the pectin molecules DE refers to that percentage of pectin units with a methyl group attached
Free COOH groups can crosslink with divalent cationsdivalent cations
Sugar and acid under certain conditions can contribute to gel structure and formation
LM pectin “low methoxyl pectin”LM pectin “low methoxyl pectin” has DE < 50% ; gelatin is controlled by adding cations (like Ca++ and controlling the pH)
HM pectinHM pectin “high methoxyl pectin” has DE >50% and forms a gel under acidic conditions by hydrophobic interactions and H-bonding with dissolved solids (i.e. sugar)
Hydrophobic attractions between neighboring pectin polymer chainspromote gelation
BETA-GLUCANSExtracts from the bran of barley and oatsLong glucose chains with mixed ß-linkagesVery large (~250,000 glucose units)
Water soluble, but have a low viscosity Can be used as a fat replacer Responsible for the health claims (cholesterol) for
whole oat products Formulated to reduce the glycemic index of a food
OthersCHITIN Polymer of N-Acetyl-D-glucosamine Found in the exoskeleton of insects and shellfish Many uses in industry, food and non-food.
INULIN Chains of fructose that end in a glucose molecule
Generally a sweet taste Isolated from Jerusalem artichokes and chicory Act as a dietary fiber Potentially a pre-biotic compound
COMPONENTS OF DIETARY FIBER
COMPONENT SOURCE
Cellulose All food plants
HemicelluloseAll food plants, especially cerealbran
Pectin Mainly fruit
LigninMainly cereals and 'woody'vegetables
Gums and some foodthickeners
Food additives in processedfoods
HYDROCOLLOIDS
A key attribute of gums is to produce viscous dispersionsviscous dispersions in water
Viscosity depends on: Gum type Temperature Concentration of gum Degree of polymerization of gum Linear or branched polymers Presence of other substances in the system
Solubility (dispersability in water) varies among gums
Agar is insoluble in cold water; dissolves in boiling water
Methylcellulose is insoluble in hot water, but soluble in cold !
Our First Browning Reaction
Caramelization
BROWNING REACTIONS in CARBOHYDRATES
There are 2 different kinds of browning reactions with carbohydrates:
Caramelization
Maillard (or non-enzymatic) browning
CARAMELIZATIONCARAMELIZATION occurs when sucrose is heated >150-170°C (high heat!) via controlled thermal processing
Dehydration of the sugar, removal of a water molecule
The structure of caramelized sugar is poorly understood but can exist in both (+) and (-) species
Commonly used as a colorantcolorant
(+) charged caramel = promotes brown color in brewing and baking industries
(-) charged caramel in beverage/ soft drink industry (cola and root beer)
CARAMELIZATION
What is referred to as “caramel pigment” consists of a complex mixture of polymers and fragments of indefinite chemical composition Caramelans (24, 36, or 125 carbon lengths)
Since caramel is a charged molecule, to be compatible with phosphoric acid in colas the negative form is used
Caramel flavor is also due to these and other fragments, condensation, and dehydration products. diacetyl, formic acid, hydroxy dimethylfuranone
Carbohydrates in Foods
Gums GUAR (Guran Gum)
Most used, Cold water soluble, Stable, Thickening agent
XANTHAN Polysaccharide from Xanthomonas campestris
Popular, inexpensive Thick gels
LOCUST BEAN Hot water to soluble Jellies, ice cream, mayonnaise
PECTINS Linear polymers of galacturonic acid
Gels form with degree of methylation of its carboxylic acid groups
Many sources, all natural, apple and citrus pomace
Susceptible to degrading enzymes Polygalacturonase (depolymerize) Pectin esterases (remove methyl groups)
Longer polymers, higher viscosity Lower methylation, lower viscosity Increase electrolytes (ie. metal cations), higher viscosity pH an soluble solids impact viscosity
Hydrophobic attractions between neighboring pectin polymer chainspromote gelation
BETA-GLUCANSExtracts from the bran of barley and oatsLong glucose chains with mixed ß-linkagesVery large (~250,000 glucose units)
Water soluble, but have a low viscosity Can be used as a fat replacer Responsible for the health claims (cholesterol) for
whole oat products Formulated to reduce the glycemic index of a food
OthersCHITIN Polymer of N-Acetyl-D-glucosamine Found in the exoskeleton of insects and shellfish Many uses in industry, food and non-food.
INULIN Chains of fructose that end in a glucose molecule
Generally a sweet taste Isolated from Jerusalem artichokes and chicory Act as a dietary fiber Potentially a pre-biotic compound
COMPONENTS OF DIETARY FIBER
COMPONENT SOURCE
Cellulose All food plants
HemicelluloseAll food plants, especially cerealbran
Pectin Mainly fruit
LigninMainly cereals and 'woody'vegetables
Gums and some foodthickeners
Food additives in processedfoods
HYDROCOLLOIDS
A key attribute of gums is to produce viscous dispersionsviscous dispersions in water
Viscosity depends on: Gum type Temperature Concentration of gum Degree of polymerization of gum Linear or branched polymers Presence of other substances in the system
Solubility (dispersability in water) varies among gums
Agar is insoluble in cold water; dissolves in boiling water
Methylcellulose is insoluble in hot water, but soluble in cold !
Our First Browning Reaction
Caramelization
BROWNING REACTIONS in CARBOHYDRATES
There are 2 different kinds of browning reactions with carbohydrates:
Caramelization
Maillard (or non-enzymatic) browning
CARAMELIZATIONCARAMELIZATION occurs when sucrose is heated >150-170°C (high heat!) via controlled thermal processing
Dehydration of the sugar, removal of a water molecule
The structure of caramelized sugar is poorly understood but can exist in both (+) and (-) species
Commonly used as a colorantcolorant
(+) charged caramel = promotes brown color in brewing and baking industries
(-) charged caramel in beverage/ soft drink industry (cola and root beer)
CARAMELIZATION
What is referred to as “caramel pigment” consists of a complex mixture of polymers and fragments of indefinite chemical composition Caramelans (24, 36, or 125 carbon lengths)
Since caramel is a charged molecule, to be compatible with phosphoric acid in colas the negative form is used
Caramel flavor is also due to these fragments and condensation/dehydration products. diacetyl, formic acid, hydroxy dimethylfuranone
Artificial andAlternative Sweeteners
Sweeteners Non-nutritive (no calories) Cyclamate (banned in 1969) Saccharin (Sweet ‘N Low, 300-fold) Aspartame (warning label) = aspartic acid and
phenylalanine (180-fold) Acesulfame-K (Sunette, 200-fold)
Alitame (Aclame, 2,000-fold) Sucralose (Splenda, 600-fold)
Sucralose
The perception of sweetnessis proposed to be due to achemical interaction that takes place on the tongueBetween a tastant moleculetastant moleculeand tongue receptor proteintongue receptor protein
THE AH/B THEORY OF SWEETNESS
A sweet tastant molecule (i.e. glucose) is called the AH+/B- “glycophoreglycophore”.It binds to the receptor B-/AH+ site through mechanisms that include H-bondingH-bonding.
AH
B
B
AH
Glycophore
γ
γ
Tongue receptor protein molecule
Hydrophobic interaction
For sweetness to be perceived, a molecule needs to have certain requirements. It must be solublesoluble in the chemical environment of the receptor site on the tongue. It must also have a certain molecular shapeshape that will allow it to bond to the receptor protein.
Lastly, the sugar must have the proper electronic distribution. This electronic distribution is often referred to as the AH, B system. The present theory of sweetness is AH-B-X (or gamma). There are three basic components to a sweetener, and the three sites are often represented as a triangle.
AH+ / B-
Gamma (γ) sites are relatively hydrophobichydrophobic functional groups such as benzene rings, multiple CH2 groups, and CH3
Identifying the AH+ and B- regions of two sweet tastantmolecules: glucose and saccharin.
WHAT IS SUCRALOSE AND HOW IS IT MADE?
Sucralose, an intense sweetener, approximately 600 times sweeter than sugar.
In a patented, multi stage process three of the hydroxyl groups in the sucrose molecule are selectively substituted with 3 atoms of chlorine.
This intensifies the sugar like taste while creating a safe, stable sweetener with zero calories.
Sucralose
Developers found that selective halogenations changed the perceived sweetness of a sucrose molecule, with chlorine and bromine being the most effective.
Chlorine tends to have a higher water solubility, so chlorine was picked as the ideal halogen for substitution.
Sucrose portion
Fructose portion
Sucralose Splenda 1998, approved for table-top sweetener and use
in various foods Approved already in UK, Canada before US Only one “made from sugar”
There was a law suit last year of this claim Splenda lost….not a natural compound and not really
made from sugar….a bit of a deceptive marketing.
Clean, sweet taste and no undesirable off-flavor
Saccharin Sweet’n Low, The 1st artificial sweetener Accidentally found in 1879 by Remsen and Fahlberg Saccharin use increased during wars due to sugar
rationing By 1917, common table-top sweetener in America Banned in 1977 due to safety issue 1991, withdrawal banning, but remained warning
label 2000, removed warning label Intensely sweet, but bitter aftertaste
Aspartame Nutrasweet, Equal Discovered in 1965 by J. Schlatter Composed of aspartic acid and phenylalanine 4 kcal/g, but 200 times sweeter Approved in 1981 for table-top sweetener and
powdered mixes Safety debating 1996, approved for use in all foods and beverage Short shelf life, not stable at high temperature
Acesulfame K Sunette, Sweet One Discovered in 1967 by Hoechst 1992, approved for gum and dry foods 1998, approved for liquid use Blending with Aspartame due to synergistic effect Stable at high temperature and long shelf life (3-4
years) Bitter aftertaste
Neotame Brand new approved sweetener (Jan. 2000) 7,000 ~ 13,000 times sweeter than sugar Dipeptide methyl ester derivative structurally
similar to Aspartame Enhance sweetness and flavor Baked goods, non-alcoholic beverages
(including soft drinks), chewing gum, confections and frostings, frozen desserts, processed fruits and fruit juices, toppings and syrups.
Safe for human consumption
WholeWheat
WheatBran
Removed
Corn
Milled,Polished
Rice
CerealsCereals Starch, protein, fiberWater LysineStructure
Husk (inedible) Bran (fiber) Endosperm (starch, protein, oil) Germ (oil)
Wheat Kernel
EndospermStarchProtein
Oil
GermOil
Protein
BranFiber
Cereal Grain
Composition of Cereals
Wheat2 types of wheatHARD = higher protein (gluten), makes
elastic dough, used for bread-making Higher “quality” High water absorption
SOFT = lower protein (gluten), make weak doughs/batters, used for cakes, pastries, biscuits, cakes, crackers, etc. Lower “quality” due to lower protein content
and useful applications
Wheat
Wheat Milling
To produce flourCleaned with air (dust, bugs, chaff)Soaked to 17% moisture - optimum for
millingRemove huskCrack seeds - frees germ from endosperm
Wheat
Wheat MillingRollers- two metal wheels turning in opposite
direction of each otherEndosperm is brittle and breaksGerm and bran form flat flakes and are
removed by screens or sievesEndosperm = flour
Less color and less nutrients as milling continuesWhole wheat flour = do not remove all of the
bran and/or germ
Wheat Mill Grinding Rolls
Wheat Milling Sifters
Wheat
Wheat EnrichmentAdd B-vitamins and some minerals to most
white flours (since missing the bran)
Uses of flourCakes, breads, etc.Pasta, noodles, etc.Course flour, not leavened
Rice Processing
Rice
Rice MillingMost rice is "whole grain"Remove husk, bran, germ by rubbing with
abrasive disks or rubber beltsPolish endosperm to glassy finishBrown rice = very little milling
Rice
Rice EnrichmentAdd some vitamins, minerals Coat rice with nutrients (folic acid)
Parboiling or steeping (converted rice)Boil rice before milling (~10 hrs, 70°C)Nutrients, vitamins and minerals, will
migrate into endosperm (no fortification)
Rice
Rice
Other rice productsQuick cooking (instant) = precooked, driedRice flourSake (15-20% alcohol)
Advantages/Disadvantages of Milling RiceBrown Rice
Minimal milling Higher in lipid (shortens shelf-life) Higher in minerals (not removed in milling)
White (Milled) Rice Extreme milling
Vitamins and minerals removed (Thiamin) Fortification to prevent Beriberi disease
Anatomy of Corn
CornCorn Some fresh/frozen/canned corn, but most is milled Dry milling (grits, meal, flour) Adjust moisture to 21%- optimum for "dry" milling Loosen hull (pericarp) and germ by rollers Dry to 15% moisture Remove husk with air blast; germ and bran by sieving Continue grinding endosperm to grits, meal or flour Process very similar to wheat milling at this point.
Grits = large particle size Meal = medium particle size Flout = small particle size
Grain Processing
Wet milling (corn starch, corn syrups)Soak cornGrind with water into a wet "paste"Slurry is allowed to settle and the germ
and hulls float to top (high in oil)Remainder is endosperm (starch/protein)Centrifuged or filtered
to remove/collect the starch
Grain Processing
Wet milling (cont'd.)Dried starch = corn starchCan produce corn syrups from starchUse enzymes (amylase) to break starch into
glucose (corn syrup)Use another enzyme (isomerase) to convert
glucose into fructose (HFCS)Can also produce ethanol from corn syrup
Products from Corn
Grain Usage
Other grains- mostly for animal feedBarley = used in beerRye = can not use alone (poor protein quality)Oats = oatmeal, flakes
Breakfast cerealsMade from many different grains
Proteins
From the Greek “proteios” or primary.
ProteinsMany important functions
Functional Nutritional Biological
EnzymesStructurally complex and large compoundsMajor source of nitrogen in the diet
By weight, proteins are about 16% nitrogen
Protein Content of Foods Beef -- 16.5% Pork -- 10% Chicken -- 23.5% Milk -- 3.6% Eggs -- 13% Bread -- 8.5% Cooked beans -- 8% Potato -- 2%
Proteins
Proteins are polymers of amino acids joined together by peptide bonds
Structure, arrangement, and functionality of a protein is based on amino acid composition
All amino acids contain nitrogen, but also C, H, O, and S
Protein Structure
The formation of peptide bond
N-C-C-N
Proteins are composed of amino acids which are carboxylic acids also containing an amine functional group.
The amino acids are linked together by peptide bonds (amide bonds) forming long chains
Short chains of amino acids are commonly called polypeptides (eg. dipeptide, tripeptide, hexapeptide, etc)
Longer chains of amino acids normally called proteins.
Proteins
Proteins
Peptide bonds are strong covalent bonds that connect 2 amino acids
Dipeptide- 2 amino acids joined together by a peptide bond
Polypeptide- 3 or more amino acids joined together by peptide bonds in a specific sequence
20 Amino Acids Alanine (Ala) Arginine (Arg) Asparagine (Asn) Aspartic acid (Asp) Cysteine (Cys) Glutamine (Gln) Glutamic acid (Glu) Glycine (Gly) Histidine (His) Isoleucie (Ile)
Leucine (Leu) Lysine (Lys) Methinine (Met) Phenylalanine (Phe) Proline (Pro) Serine (Ser) Threonine (Thr) Tryptophan (Trp) Tyrosine (Try) Valine (Val)
Proteins Composed of amino acids 20 common amino acids Polymerize via peptide bonds Essential vs. non-essential amino acids Essential must come from diet Essential amino acids:
"Pvt. T.M. Hill” phenylalanine, valine, threonine, tryptophan,
methionine, histidine, isoleucine, leucine, lysine
Properties of Amino AcidsAliphatic chains: Gly, Ala, Val, Leucine, IleHydroxy or sulfur side chains: Ser, Thr, Cys, MetAromatic: Phe, Trp, TryBasic: His, Lys, ArgAcidic and their amides: Asp, Asn, Glu, Gln
Properties of Amino Acids:
Aliphatic Side Chains
Aromatic Side Chains
Acidic Side Chains
SulfurSideChains
Properties of Amino Acids:Zwitterions are electrically neutral, but carry a
“formal” positive or negative charge.Give proteins their water solubility
The Zwitterion Nature Zwitterions make amino acids good acid-base buffers.
For proteins and amino acids, the pH at which they have no net charge in solution is called the Isoelectric Point of pI (i.e. IEP).
The solubility of a protein depends on the pH of the solution.
Similar to amino acids, proteins can be either positively or negatively charged due to the terminal amine -NH2 and carboxyl (-COOH) groups.
Proteins are positively charged at low pH and negatively charged at high pH. When the net charge is zero, we are at the IEP.
A charged protein helps interactions with water and increases its solubility.
As a result, protein is the least soluble when the pH of the solution is at its isoelectric point.
Physical Nature of Proteins
Protein StructuresPrimary = sequence of amino acidsSecondary = alpha helix, beta pleated sheetsTertiary = 3-D folding of chainQuaternary = “association” of subunits and
other internal linkages
Primary Sequence
Secondary protein structureThe spatial structure the protein assumes along
its axis (its “native conformation” or min. free energy)
This gives a protein functional properties such as flexibility and strength
Tertiary Structure of Proteins3-D organization of a polypeptide chainCompacts proteins Interior is mostly devoid of water or charge groups
3-D folding of chain
Quaternary Structure of ProteinsNon-covalent associations of protein units
Shape Interactions of Proteins
Protein Structure
Globular - polypeptide folded upon itself in a spherical structure
Fibrous – polypeptide is arranged along a common straight axis
Classification of simple proteins Composed of amino acids and based on solubility. Every food has
a mixture of these protein types in different ratios. Albumins – soluble in pure water Globulins – Soluble in salt solutions at pH 7.0, but
insoluble in pure water Glutelins – soluble in dilute acid or base, but insoluble in
pure water Prolamins – soluble in 50-90% ethanol, but insoluble in
pure water Scleroproteins – insoluble in neutral solvents and
resistant to enzymatic hydrolysis Histones – soluble in pure water and precipitated by
ammonia; typically basic proteins Protamines – extremely basic proteins of low molecular
weight
Classification of complex proteins
A protein with a non-protein functional group attached
Glycoproteins- carbohydrate attached to protein Lipoproteins – lipid material attached to proteins Phosphoproteins- phosphate groups attached Chromoprotein- prosthetic groups associated
with colored compounds (i.e. hemoglobin)
Emulsoids and Suspensiods
Proteins should be thought of as solids Not in true solution, but bond to a lot of water
Can be described in 2 ways:
Emulsoids- have close to the same surface charge with many shells of bound water
Suspensoids- colloidal particles that are suspended by charge alone
Functional Properties of Proteins3 major categories Hydration properties
Protein to water interactions Dispersibility, solubility, adhesion, Water holding capacity, viscosity
Structure formation Protein to protein interactions Gel formation, precipitation, Aggregation
Surface properties Protein to interface interactions Foaming, emulsification
Proteins and peptide chains are “directional”. That means the chain has a free alpha amino group and a free carboxyl group.
The Amino Terminus (N-Terminus) is the end of the chain containing the free alpha amino function. The Carboxy Terminus (C-Terminus) is the end of the chain containing the free carboxyl group.
NH3
HOOC
N
C
Proteins: more than just energy
“Functional” propertiesEmulsifierFoaming = egg whitesGel formation = jelloWater binding or thickeningParticipation in browning reactions
Enzymes (more on this next week)
Enzymes Proteins that act as catalysts
Can be good or bad
Ripening of fruits, vegetables Meat tenderization Destruction of color, flavor Heat preservation, inactivates
Blanching, cooking
ProteinsChanges in structure Denaturation
Breaking of any structure except primary Reversible or irreversible, depending on severity of the
denaturation process Examples:
Heat - frying an egg High salt content High alcohol content Low or High pH Extreme physical agitation Enzyme action (proteases)
Protein Structure (part of the tertiary structure)
Globular - polypeptide folded upon itself in a spherical structure
Fibrous – polypeptide is arranged along a common straight axis (beta-pleated sheet)
Classification of simple proteins Composed of amino acids and based on solubility. Every food has
a mixture of these protein types in different ratios. Albumins – soluble in pure water Globulins – Soluble in salt solutions at pH 7.0, but
insoluble in pure water Glutelins – soluble in dilute acid or base, but insoluble in
pure water Prolamins – soluble in 50-90% ethanol, but insoluble in
pure water Scleroproteins – insoluble in neutral solvents and
resistant to enzymatic hydrolysis Histones – soluble in pure water and precipitated by
ammonia; typically basic proteins Protamines – extremely basic proteins of low molecular
weight
Classification of complex proteins
A protein with a non-protein functional group attached
Glycoproteins- carbohydrate attached to protein (i.e. ovomucin)
Lipoproteins – lipid material attached to proteins (i.e. HDL and LDL)
Phosphoproteins- phosphate groups attached (i.e. casein)
Chromoprotein- prosthetic groups associated with colored compounds (i.e. hemoglobin)
Emulsoids and Suspensiods
Proteins should be thought of as solids Not all in a true solution, but bond to a lot of water
Can be described in 2 ways:
Emulsoids- have close to the same surface charge, with many “shells” of bound water
Suspensoids- colloidal particles that are suspended by charge alone
Functional Properties of Proteins3 major categories Hydration properties
Protein to water interactions Dispersion, solubility, adhesion, viscosity Water holding capacity
Structure formation Protein to protein interactions Gel formation, precipitation, aggregation
Surface properties Protein to interface interactions Foaming and emulsification
1. Hydration Properties (protein to water)
Most foods are hydrated to some extent. Behavior of proteins are influenced by the presence of water and
water activity Dry proteins must be hydrated (food process or human digestion)
Solubility- as a rule of thumb, denatured proteins are less soluble than native proteins
Many proteins (particularly suspensoids) aggregate or precipitate at their isoelectric point (IEP)
Viscosity- viscosity is highly influenced by the size and shape of dispersed proteins Influenced by pH Swelling of proteins Overall solubility of a protein
2. Structure Formation (protein to protein)
Gels - formation of a protein 3-D network is from a balance between attractive and repulsive forces between adjacent polypeptides
Gelation- denatured proteins aggregate and form an ordered protein matrix Plays major role in foods and water control Water absorption and thickening Formation of solid, visco-elastic gels
In most cases, a thermal treatment is required followed by cooling Yet a protein does not have to be soluble to form a gel (emulsoid)
Texturization – Proteins are responsible for the structure and texture of many foods Meat, bread dough, gelatin Proteins can be “texturized” or modified to change their
functional properties (i.e. salts, acid/alkali, oxidants/reductants) Can also be processed to mimic other proteins (i.e. surimi)
3. Surface Properties (protein to interface)
Emulsions- Ability for a protein to unfold (tertiary denaturation) and expose hydrophobic sites that can interact with lipids. Alters viscosity Proteins must be “flexible” Overall net charge and amino acid composition
Foams- dispersion of gas bubbles in a liquid or highly viscous medium Solubility of the protein is critical; concentration Bubble size (smaller is stronger) Duration and intensity of agitation Mild heat improves foaming; excessive heat destroys Salt and lipids reduce foam stability Some metal ions and sugar increase foam stability
Quick Application: Food Protein Systems
Milk- Emulsoid and suspensoid system Classified as whey proteins and caseins Casein - a phosphoprotein in a micelle structure Suspensoid - coagulates at IEP (casein)
Egg (Albumen) – Emulsoid Surface denatures very easily Heating drives off the structural water and creates a
strong protein to protein interaction Cannot make foam from severely denatured egg white,
requires bound water and native conformation
Factors Affecting Changes to Proteins
Denaturation
Aggregation
Salts
Gelation
Changes to Proteins Native State
The natural form of a protein from a food The unique way the polypeptide chain is oriented
There is only 1 native state; but many altered states The native state can be fragile to:
Acids Alkali Salts Heat Alcohol Pressure Mixing (shear) Oxidants (form bonds) and antioxidants (break bonds)
Changes to ProteinsDenaturation
Any modification to the structural state The structure can be re-formed If severe, the denatured state is permanent
Denatured proteins are common in processed foods Decreased water solubility (i.e. cheese, bread) Increased viscosity (fermented dairy products) Altered water-holding capacity Loss of enzyme activity Increased digestibility
Changes to Proteins Temperature is the most common way to denature a
protein Both hot and cold conditions affect proteins
Every tried to freeze milk? Eggs?
Heating affects the tertiary structure Mild heat can activate enzymes
Hydrogen and ionic bonds dissociate Hydrophobic regions are exposed Hydration increases, or entraps water Viscosity increases accordingly
Changes to ProteinsWe discussed protein solubility characteristicsSolubility depends on the nature of the solution
Water-soluble proteins generally have more polar amino acids on their surface.
Less soluble proteins have less polar amino acids and/or functional groups on their surface.
Isoelectric PrecipitationsProteins have no net charge at their IEP
- -
- -- -
- - - -
- -
+ +
+ ++ +
+ ++ +
+ ++ +
+ ++ +
+ ++ +
+ +
- -
- -+ +
+ + - -
+ +
- -
- -- -
- - - -
- -
- -
- -+ +
+ + - -
+ +
Strong Repulsion
(net negative charge)
Strong Repulsion
(net positive charge)
Aggregation
(net neutral charge)
Isoelectric PrecipitationsProteins can be “salted out”, adding charges
- -
- -- -
- - - -
- -+ +
+ ++ +
+ ++ +
+ +Aggregation
(net neutral charge)
Na+Na+ Na+ Cl-Cl- Cl-
Measuring IEP PrecipitationsEmpirical measurements for precipitationA protein is dispersed in a buffered solution
Add salt at various concentrations Add alcohols (disrupt hydrophobic regions) Change the pH Add surfactant detergents (i.e. SDS)
Centrifuge and measure quantitatively The pellet will be insoluble protein The supernatant will be soluble protein
Gel Formation Many foods owe their physical properties to a gel
formation. Influences quality and perception. Cheese, fermented dairy, hotdogs, custards, etc
As little as 1% protein may be needed to form a rigid gel for a food.
Most protein-based gels are thermally-induced Cause water to be entrapped, and a gel-matrix formation
Thermally irreversible gels are most common Gel formed during heating, maintained after cooling Will not reform when re-heated and cooled
Thermally reversible gels Gel formed after heating/cooling. Added heat will melt the gel.
Gel Formation Many foods owe their physical properties to a gel
formation. Influences quality and perception. Cheese, fermented dairy, hotdogs, custards, etc
As little as 1% protein may be needed to form a rigid gel for a food.
Most protein-based gels are thermally-induced Cause water to be entrapped, and a gel-matrix formation
Thermally irreversible gels are most common Gel formed during heating, maintained after cooling Will not reform when re-heated and cooled
Thermally reversible gels Gel formed after heating/cooling. Added heat will melt the gel.
Processing and StorageDecreases spoilage of foods, increases shelf life
Loss of nutritional value in some cases Severity of processing
Loss of functionality Denatured proteins have far fewer functional aspects
Both desirable and undesirable flavor changes
Processing and StorageProteins are affected by
Heat Extremes in pH (remember the freezing example?) Oxidizing conditions
Oxidizing additives, lipid oxidation, pro-oxidants Reactions with reducing sugars in browning rxns
Processing and Storage Mild heat treatments
May slightly reduce protein solubility Cause some denaturation Can inactive some enzyme Improves digestibility of some proteins
Severe heat treatments (for example: >100°C) Some sulfur amino acids are damaged
Release of hydrogen sulfide, etc (stinky)
Deamination can occur Release of ammonia (stinky)
Very high temperatures (>180°C) Some of the roasted smells that occur with peanuts or coffee
Enzyme Influencing Factors Enzymes are proteins that act as biological catalysts They are influenced in foods by:
Temperature pH Water activity Ionic strength (ie. Salt concentrations) Presence of other agents in solution
Meta chelators Reducing agents Other inhibitors
Enzyme Influencing Factors
Temperature-dependence of enzymesEvery enzyme has an optimal temperature for
maximal activityThe effectiveness of an enzyme: Enzyme activityFor most enzymes, it is 30-40°CMany enzymes denature >45°CEach enzyme is different, and vary by isozymes Often an enzyme is at is maximal activity just
before it denatures at its maximum temperature
pHLike temp, enzymes have an optimal pH where
they are maximally activeGenerally between 4 and 8
with many exceptions
Most have a very narrow pH range where they show activity.
This influences their selectivity and activity.
Water ActivityEnzymes need free water to operateLow Aw foods have very slow enzyme reactions
Ionic StrengthSome ions may be needed by active sites on the
protein Ions may be a link between the enzyme and substrate Ions change the surface charge on the enzyme Ions may block, inhibit, or remove an inhibitor Others, enzyme-specific
Common Enzymes in FoodsPolyphenol oxidasePlant cell wall degrading enzymesProteasesLipasesPeroxidase/CatalaseAmylaseAscorbic acid oxidaseLipoxygenase