Effective March 1, 2019
FAERON | COLLECTION Price and Specification Guide
USA
HEALTHCARE SOLUTIONS
August 2019
HEALTHCARE | USA | 1
TABLE OF CONTENTS
GENERAL INFORMATION
2 General Information
4 Finishes & Laminates
5 Laminate Technical Specifications
6 High-Pressure Laminate Technical
Specifications
6 Solid Surface Technical Specifications
7 Upholstery Fabrics
8 Leather & Faux Leather
8 Graded-In Upholstery Programs
9 Customer’s Own Material - C.O.M.
10 KrugExpress Program
10 Solid Surface Program
PRICING & SPECIFICATIONS
11 Faeron Wood Guest
17 Faeron Wood Patient
21 Faeron Wood Guest Multiple Seating
35 Faeron Wood Guest Easy Access
38 Faeron Wood Tables
42 Faeron Metal Guest
48 Faeron Metal Patient
52 Faeron Metal Guest Multiple Seating
69 Faeron Metal Guest Easy Access
72 Faeron Metal Tables
78 Faeron Lounge Armless, Low Back
79 Faeron Lounge Armless, High Back
80 Faeron Lounge Wood Arm, Low & High Back
84 Faeron Lounge Uphostered Arm, Low Back
85 Faeron Lounge Uphostered Arm, High Back
86 Faeron Lounge Wing Back
August 2019
August 2019
WarrantyKrug warrants the construction and the finish of all our products tobe free from defects in materials and workmanship for the lifetimeof their use. This warranty is applicable to products in use by theiroriginal purchaser. This warranty does not apply to components notmanufactured by Krug including textiles, which are subject to thespecific warranties of those manufacturers, if any. Textiles (fabric,leather, vinyl, or any other covering material) suppliers do notguarantee their products for durability and color fastness, and nordoes Krug. Casters, mechanical and electrical components have awarranty of five years from the date of purchase. The Krug warrantydoes not apply to COM-specified materials, damage caused by acarrier other than Krug, or variation in wood finishes due to naturalwood color variation. Krug cannot be held responsible for variationsin fabric dye lots from order to order. All fabric is carefully inspectedwhen it is received, but a degree of variation in color should beexpected. Repairs or replacement of any defect covered under thiswarranty by Krug will be made, at our option and method, at nocharge to the original purchaser during the warranty period. Krug’sjudgement is final and binding with respect to the nature or causeof defects or damage, and the necessity or manner of repair orreplacement. This warranty does not apply to defects or damageresulting from:• normal wear and tear occurring with the use of the product• negligence, misuse, excessive use, alteration, improper cleaningor repair
•
•
substitution or use of incorrect or unauthorized components ormaterialhandling or installation that is incorrect, or that causes damage ordefect
• damage incurred by a freight carrier other than Krug• wearing of finishes and fabrics, and normal variations in materials(including dye lot variations)
• properties of natural materials, including wood and leather• exposure to environments with uncontrolled temperature andhumidity (products must be transported, stored and used inclimate-controlled conditions)
Note, specific warranties for components and materials notmanufactured by Krug:Jordan Sleepers Heavy-Duty Mechanism, made with heavy gaugesteel and minimal moving parts - is backed by a 5-year warranty onthe mechanism itself, in addition to the lifetime warranty on the restof the product. If it does become damaged or degraded, the mech-anism can be field-replaced.Juno and Trevisa Overbed Tables have a 2-year warranty.
Export PackagingKrug is pleased to provide the option for export packaging on all ourproducts, to provide additional protection from damage. Exportpackaging is provided at an upcharge of 5% of the net selling priceper item.Export Packaging is STRONGLY RECOMMENDED for:(A) all shipments outside of the lower 48 states and Canada.(B) all shipments that will be held in storage for an extended period
prior to installation.Important: Please note that Krug will not be responsible for damageclaims on product shipped or stored in the above conditions butwhere export packaging has not been utilized.Please contact Customer Service for specifications or any other assistance regarding export packaging.
Freight Terms and Conditions1. All product is shipped FOB the Krug factory. Freight is either
pre-paid to the destination (dealer’s dock or territorial warehouse,where available) or not pre-paid, depending on establishedcustomer specific freight terms.
2. Docks at the selected delivery location must be equipped to handlea 53’ trailer. If a dock is inadequate for delivery by Krug, Krug willre-deliver to another local location and any additional costs will becharged to the customer.
GENERAL INFORMATION
Terms and ConditionsNet 30 days on approved credit. A late payment charge of 1% permonth will be applied on overdue invoices. This charge will be pro-rated to the number of days past 30 days that the invoice isoverdue. All applicable sales taxes are extra. Distribution of this pricelist does not in itself constitute an offer to sell. Orders can be received only from authorized Krug dealers. Acceptance of any orderand terms of sale may be established at the discretion of Krug. Deposits are required on orders received from new accounts as wellas on large or special orders. Krug reserves the right to discontinue designs, or to change designs, construction, prices, ormaterials without notice.
Customer Service HoursPlease note customer service hours are:8:30 am to 5:00 pm est1.888.578.KRUG1.519.748.5177 fax
Order AcknowledgementsEach order will be acknowledged via e-mail or fax. This acknowledgementis the final agreement between Krug and the customer, supersedingall previous communications regarding the purchase order. Wherethere is a discrepancy on a purchase order between a product codeand a description, Krug will make every effort to resolve the discrepancy,but will be ruled by the product code ordered. Please check all acknowledgements for accuracy, and advise Krug of any discrepancies with a purchase order.
CancellationA cancellation can be made only by expressed agreement with Krug.A cancellation fee may be incurred for restocking.
DimensionsDimensions are in inches and approximate, and subject to changewithout notice. Contact Customer Service if dimensions are critical.
Blanket WrappingKrug will blanket wrap larger seating orders at customer’s request.Please indicate on your purchase order and contact Customer Service.
Storage ChargesKrug reserves the right to assess a nominal storage charge if a customer does not accept shipment of an order within a week of theship date.
Contact InformationPhone: 1.888.578.KRUG (5784)Fax: 1.519.748.5177Purchase Order Fax: 1.888.236.4783Purchase Order E-mail: [email protected]: www.krug.caE-mail: [email protected]
Installation SupportFor assistance please contact Technical Support at 1-888-578-5784 x216or e-mail [email protected] and you will be directed to the appropriate installation support person.
PricingKrug endeavors to ensure that all prices in this price list reflect accurately our current prices. However, errors do occur and will berectified through notices to the field. Krug’s website will always havethe current list price. Krug reserves the right to acknowledge pricingthat may be different from the price list.
2 | USA | HEALTHCARE
August 2019
Freight Terms and Conditions, con’t.3. When a Krug territorial warehouse (where available) is selected
as the default delivery location, it is understood that Krug paysfreight cost to the territorial warehouse only, and no further. TheCustomer is responsible for all charges from this point.
4. For all deliveries, it is understood that Krug or its agent is makinga dock delivery only (equipped to handle a 53’ trailer), and anyfurther work of truck unloading, delivery beyond the dock,installation, and removal of packaging is not authorized or paidfor by Krug.
5. Drop shipments to the installation site, and timed deliveries, areavailable on larger shipments (full truckloads or slightly less) at noadditional charge. Drop shipments or timed deliveries for smallershipments may not be available, or if available will require asurcharge. Deliveries on an after hours basis, or on weekends, orany other special requirements, may be subject to a surcharge.Location and contact information, and the requested time ofdelivery, is required at least one week prior to the acknowledgedshipment date. If this information is not provided one week inadvance, or if the location or time of the drop shipment ischanged less than one week in advance, a surcharge may beapplied, and/or the drop shipment may not be scheduled. Fordeliveries requested Monday to Thursday after 5:00 pm, pleaseapply a surcharge of $250/shipment. For deliveries requestedMonday to Friday before 7:00 am, please apply a surcharge of$250/shipment. For deliveries requested Friday (after 3:00 pm) orweekends, please apply a surcharge of $500/shipment. (local times).
6. For all deliveries - whether to the Customer location or dropshipment - any circumstances that result in the delay of ourcarrier (including unsuitable receiving facilities, or facilities notopen or available), service charges will be applied at the rate of$75/hour. Where re-delivery is necessary because of thesecircumstances, the full cost of re-delivery will be charged. If LessThan Truck Load is delivering, one hour is allocated to unload.Any additional time required to unload after the first hour is$75/hour. If a Truck Load is delivering the order, three hours isallocated to unload. Any additional time required to unload is$75/hour. Direct deliveries to site for large orders are possible,(must exceed $60,000 net), and accommodate 48 - 53’ trailers.Krug is responsible for delivery to the approved delivery address.If an address change is required, this must be authorized by Krug5 business days prior to ship date. Any additional delivery costsincurred after this time will be charged to the customer. If aproblem arises with a Krug product after the expiration of thelimited warranty period, Krug will exercise its best efforts toachieve the satisfaction of the customer in a manner that is fairto all concerned.
Product Strength and Durability TestingAll Krug products have been thoroughly tested, and exceed thetesting requirements of ANSI/BIFMA seating standard.Specific test results and documentation are available on request.
Customer SatisfactionIt is the primary goal of Krug and our staff to ensure the completesatisfaction of our customers with our products and performance.If a problem arises with a Krug product after the expiration of thelimited warranty period, Krug will exercise its best efforts to achievethe satisfaction of the customer in a manner that is fair to all concerned.
Damaged ShipmentsAll Krug product is well engineered, carefully inspected, and expertlyloaded onto our trucks at our Distribution Center. If you receive anydamaged freight, we ask that you do not refuse the shipment. Krugis not responsible for damage to goods that occurs in transit or storage. It is the purchaser and/or receiver’s responsibility to examine
the goods upon receipt and to notify Krug of any damages, overagesor shortages. Any discrepancies should be noted on the Bill of Lading.The delivering carrier will not accept responsibility for shortages ordamages if signed ‘‘clear’’. Notification of concealed damage claimsmust be made to Krug Distribution within 5 days of delivery, alongwith digital pictures if available. All product and packaging must beavailable for inspection. Krug liability ceases after 5 business daysand Krug will not be responsible for concealed damages if shipments are left unopened. Krug is not responsible for the conditionof product that is stored or installed in an environment where temperature and humidity are not controlled.
Field Product Report AuthorizationKrug's written authorization, in the form of an FPR number, must beobtained prior to incurring charges of any kind if Krug is expected topay these charges. This includes authorization for field repairs andreplacements, installation and delivery charges. Krug reserves theright to have its representative inspect product related to any request for such authorizations, prior to that authorization being provided. Deductions from invoices paid for any charges to Krug,without prior written authorization in the form of an FPR, will not beaccepted. Digital photographs may be required to complete the FPRprocess.
ReturnsNo merchandise may be returned without Krug’s prior written consent. In the event of an authorized return, a Field Product Report(FPR) number will be issued, and a restocking charge will apply. Return transportation charges must be prepaid. Unauthorized returns will not be accepted and will be returned freight collect. Allmerchandise being returned must be properly packaged in its original or comparable replacement packaging to ensure protectionof the product during handling and transportation. Returns on ordersduplicated by the customer must be received in their original packaging to be accepted. Product being returned where Krug hasauthorized its liability for replacement or repair will be thoroughlyinspected on its return, and the results compared to the reason forthe return stated on the FPR. Any discrepancies, such as additionaldamage, signs of usage, missing parts, etc., will result in an adjustmentto the amount of credit issued.
Custom CapabilitiesOver 15% of our orders involve some type of custom work, and weinvite our customers to make use of our extensive capabilities.
These include:1) Dimensional customization of standard size products2) Custom finishes3) For larger orders, completely custom-designed products, as well
as non-standard wood species can be specified.
Custom orders may require additional production lead times. ContactEngineering at the e-mail address [email protected].
Care and Maintenance LeatherLeather is a natural product and requires very little care during use.Most stains can be removed with a clean dry cloth. For stubbornspots and stains, use a mild non-detergent cleaner, rinse well and letair dry naturally. Do not use saddle soap, cleaning solvents, furniture polish, oils, varnish, abrasive cleaners, soaps or ammoniawaters.
Fabric UpholsteryProfessional upholstery cleaning is recommended.
Flammability Standards for Krug Textiles - Upholstery Program
• Passes State of California TechnicalBulletin CAL 117-2013
GENERAL INFORMATION
HEALTHCARE | USA | 3
4 | USA | HEALTHCARE
FINISHES & LAMINATES
Wood Finishes for Seating & Occasional Tables
Standard wood finishes are:
Finishes on BeechAppalachian CherryAmerican CherryImperial CherryLight CherryMedium CherryNatural CherrySable CherryStandard CherryLight OakHarvest OakMahoganyMellow OakSliverGrey on OakEspressoCordovan Walnut Natural WalnutRegular WalnutSliverGrey on WalnutDark WalnutClear BeechMedium Anigre
PALETTEBlack, White, Soft Green, Steel Blue, Slate
Wood is a natural product with inherent color variations that will never be fullymitigated by the finishing process. Please anticipate variation in colors within a single unit,from piece to piece, and from Krug wood finish samples. If a very close match is required,a sample must be provided with the order and an upcharge will apply. Exact color matchesare not possible.
Custom Wood FinishesAdd 10% list to your order for special finishes a minimum upcharge is $500 list per finishper order. (For example, on all orders up to $5000 list an upcharge of $500 will apply, onorders $5000 and up add 10% list to order.)
Special finish upcharges on seating products are calculated on a grade 1 value. For orderswith special finishes, a sample that is a minimum 3” by 3” must be received with the order.Special finishes may add additional lead time to production schedules. Since wood is a natural product, some variations in grain, color and stain acceptance will occur. In our finishing processes, we try to minimize variations, but some variation between samplesand finished goods should be anticipated.
Dual FinishesAdd 10% list per item if specifying dual finish.
Standard Wood FinishesNo upcharge will be applied when specifying a finish available as standard on one speciesonto maple seating and occasional tables. Clear finishes are not available on other speciessince they are a clear finish on top of the natural veneer color.
Natural Characteristics of Wood
LAMINATESKrug’s in-stock Laminates are available in 17 different laminate selections. Please note that 4 of the colors (Gingerbread, Portobello, Ash andWillow) have textured finishes and may not be appropriate for use in patient areas due to infection control concerns. Minimum order quantitiesand extended lead times may apply for exotic laminate colors, please check with customer service. Polymer Edge will be selected to matchthe worksurface. Krug’s previous laminate in-stock program will be phased out as in-stock supply depletes. Please contact customer servicefor availability.IN-STOCK LAMINATES
Solid Laminates
Designer White Wilsonart D354-60Platinum Tafisa T202CREarth Tafisa T767CRCharcoal Tafisa T228CR
Non-Stocked LaminatesFor specific lead time and application questions, please contact Krug Customer Service for your requirement. Upcharges will be applicablefor non-stocked laminates, depending on their cost. Non-stock laminates may require a minimum order quantity, please contact customerservice. Stocked polymer edges only can be specified for use with non-stocked laminates or tops will be self-edged.
PHASE OUT LAMINATES
Mocha Cherry - Almond - Black- Shadows - Edgewood Sycamore - Gunstock Walnut
Wood Grain Laminates High Pressure Laminate Supplier Textured Wood Grain Laminates High Pressure Laminate Supplier
Champagne Tafisa T492CR Gingerbread Tafisa T556URHardrock Maple Formica 86992-58 Portobello Tafisa T557URDune Tafisa T491CR Ash Tafisa T535ATCopper Tafisa T521CR Willow Tafisa T543ATShiraz Cherry Tafisa T472CRPark Avenue Walnut Wilsonart 7984–38Chocolate Tafisa T498CRNutmeg Tafisa T477CRDark Walnut Tafisa T469CR
METAL FINISHESSilver Metallic Standard - No Upcharge. Additional frame finishes are available for an upcharge of $49 list per seat/ table. Available colors are: • White • Parchment • Sand • Taupe • Warm Grey • Cool Grey • BlackFor all metal finishes other than Silver Metallic Standard, there is a minimum order quantity of 30 units per color. Upcharges for orderquantities less than 30 units per color, custom metal finishes or anti-microbial finish please contact Customer Service to obtain a quote.
August 2019
HEALTHCARE | USA | 5
LAMINATE - TECHNICAL SPECIFICATIONS
NEMA STANDARDS * KRUG’S PROPERTIES DESCRIPTION (LD 3-2005) PROGRAM
Wear Resistance Measure of the ability of the surface to keep its design 400 cycles 400 cycles - Solid Colorsor color under abrasive wear 125 cycles - Prints
Appearance Presence of visual defects on decorative surface No surface defects No surface defects
Scratch Resistance Measure of the ability of decorative surface to scratch n/a 3.4 Nby diamond tip tool
Stain Resistance Measure of the ability of the decorative surface to resist 1 to 10 no effect 1 to 10 no effectto stain when exposed to 15 household products 11 to 15 moderate (difficult 11 to 15 moderate (see list below of products tested) to perceive the stain)
Cleanability Measure of the ability of a decorative surface to be Maximum 20 Maximum 20cleaned when exposed to 15 soiling agents (See list below)
Light Resistance Measure of the ability of a decorative surface to retain Slight Slightits color when exposed to a light source close to sunlight
High Temperature Measure of the ability of a decorative surface to maintain Slight SlightResistance its color and aspect when exposed to high temperature
Radiant Heat Measure of the ability of a decorative surface to resist No effect after No effect afterResistance any damage when exposed to a radiant heat source 60 seconds 60 seconds
Boiling Water Measure of the ability of a decorative surface to resist No effect No effectResistance any damage when exposed to boiling water for 20
minutes
Impact Resistance Measure of the maximal falling height of a steel ball 381 mm/n 381 mm/nthat does not cause fracture to the decorative surface 15 in 15 in
Fire Resistance Measure of flame spread rating under controlled n/a Class IIIconditions
Warping Measure of the maximal departure of the surface n/a 3 mm/mfrom flatness
STAIN PREPARATION NOTES APPLICATION
1. Distilled Water As received Apply 2 drops (6 mm spot) cover with watch glass
2. Ethyl Alcohol Solution A solution of 50% ethyl alcohol and 50% As abovedistilled water as received
3. Acetone As received As above
4. Household Ammonia As received (non-sudsing type) As above
5. 10% Citric Acid A solution of 10% citric acid in distilled water As above
6. Vegetable Oil As received As above
7. Fresh Coffee 1 teaspoon instant coffee per 180 ml As aboveof distilled water
8. Fresh Tea Brew 1 tea bag per 120 ml distilled As aboveboiling water for 2 minutes
9. Ketchup As received As above
10. Yellow Mustard As received As above
11. 10% Povidone Iodine As received As above
12. Black Permanent Marker As received Mark spot (6 mm spot), do not cover
13. #2 Pencil As received As above
14. Wax Crayon As received As above
15. Black Paste Shoe Polish As received Apply (6 mm spot) do not cover
STAIN RESISTANCE (see above)products tested:
August 2019
6 | USA | HEALTHCARE
HIGH-PRESSURE LAMINATE - TECHNICAL SPECIFICATIONS
PHYSICAL PROPERTIES NEMA LD3-2005 STANDARD HPLs
Appearance 3.1 No ABC Defects
Light Resistance 3.3 Slight
Cleanability 3.4 20 (maximum)
Stain Resistance (see Products Tested on previous page) 3.4Reagents 1-10 No EffectReagents 11-15 Moderate
Boiling Water Resistance 3.5 Slight
High Temperature Resistance 3.6 Slight
Ball Impact Resistance - mm 762 (minimum)- in 3.8 30 (minimum)
Radiant Heat Resistance - sec 3.10 100 (minimum)
Dimensional Change 3.11Machine Direction - % 1.1 (maximum)Cross Direction - % 1.4 (maximum)
Wear Resistance - cycles 3.13 400 (minimum)
PROPERTIES UNIT RESULT TEST STANDARD
Specific Gravity g/cm3 1.8
Tensile Strength psi 5,400 ASTM D 638
Tensile Modulus psi 1.4x10ASTM D 638
Elongation % min 0.42 ASTM D 790
Flexural Strength psi 9,200 ASTM D 790
Flexural Modulus psi 1.38x105 ASTM D 785
Hardness (Rockwell) 92 ASTM D 785
Thermal Expansion mm/mc 3.04x105 ASTM D785
Gloss (60O Gardner) 5 - 20 ANSI Z124
Color Stability No Change NEMA LD3
Wear & Cleanability Passes ANSI Z124
Boiling Water Surface Resistance No Change NEMA LD3
High Temperature Resistance No Change NEMA LD3
Stain Resistance Passes Nema LD3
Impact Resistance No Fracture Nema LD3
IZOD Impact Strength ft.lbs/in 0.28 ASTM D256
Water Absorption Weight %max 0.03 ASTM D 570
Fungi & Bacteria No Attack ANSI Z124
Weatherability No Change ASTM D 1499
NSF 51 Listed All Colors NSF
SOLID SURFACE - TECHNICAL SPECIFICATIONS(Specifications of Solid Surface Materials vary slightly by brand. The following is a typical set of technical specifications.)
(Specifications refer to Krug’s standard high pressure laminates)
August 2019
HEALTHCARE | USA | 7
Epic
AzureCapriEspressoFlareGraniteJuteKiwiLimestonePearlPorciniRegalSliceSteel
Knack
BerryBriskCarbonDark RoastFilamentFrescoGlazeReedSaxTeakWaveZestZing
Bangle
BalticCorkGraniteOrchidSableSuedeTeak
Lineup
BalticFernPewterSandstoneShadowSpiceTranquil
KRUG TEXTILES - UPHOLSTERY FABRICS
Krug Textiles - Fabric ProgramKrug Grade 1, 2 and 3 fabrics are also available on a cut yardage basis.
Perk
AuburnCabanaCedarCrimsonDijonEbonyFlintPatriotPewterRegalSesameWalnut
Vox
BarkBlackCocoaDownpourEcoFrotheGoldenrodHonestHotLimelightMorelMysticNavyOatParRubySnapTurquoise
Fuse
AzureanCarmineCressGingerIrisLunarMaltedMorelPepperPimentoPristineSaffronWalnut
Expo
FestiveFogLatteLeafLemonOasisRaspberrySkySpiritSproutTuxedoViolaZest
Solace
AlmondAzulBlazeCarmineCeladonCinderEarthEbonyFossilGildedIndigoIvoryMineralPearPeony
Current
BirchCadetEclipseEspressoMossPecanPlum
Clang
AmberClaretCloveCressFlintMaltRaven
Kinney
CoffeeFrappeGlacierMineralNectarSteelValentine
Grade 1
Grade 2
Grade 3
Krug Textiles - Cut fabric per yard
Grade 1 $53Grade 2 $63Grade 3 $73
August 2019
8 | USA | HEALTHCARE
Krug Textiles - Faux Leather Program
White CreamParchment Sandstone VanillaTaupe Mocha Tan Chestnut
Bisque Chocolate BlackEarth Brick Wine Garnet Rust Citron
SprigChinchilla Steel Grey Lagoon Pacific Blue Navy Plum
KRUG TEXTILES | LEATHER & LUXE FAUX LEATHER
GRADED-IN UPHOLSTERY PROGRAMSKrug has partnered with several textile brands to grade in their offerings, designed to provide a wide range of upholstery selectionsfor our seating products.
Upholstery pricing and availability is subject to change without notice.We grade this upholstery according to the pricing of the fabric suppliers - when their pricing changes, the Krug grade may change.
When placing an order, a Krug customer must specify the completeupholstery number, along with the appropriate Krug model number andfinish. Krug will supply the complete product at the prices listed.Orders specifying graded-in upholstery cannot be cancelled once theupholstery has been ordered.
Upholstery GradesTo determine the price of a product for graded-in upholstery, use thereference lists located on Krug’s website under - Products - Textiles,to view the upholstery grade (1-9). Krug is not responsible for thediscontinuation of this upholstery. Please contact Customer Servicefor information on upholstery not listed.
When two upholstery selections are specified for use on seating, thehigher grade upholstery price will apply to the order.
High Performance upholstery; Polyurethane, Vinyl or Crypton, is particularly suitable for healthcare and other intensive-use environments.
Upholstery SamplesIf you require additional samples or memos for presentation, pleasecontact fabric supplier directly.
Flammability Standards• Tunnel Test Surface Ratings Class A rating• Class 1 UFAC• Passes State of California Technical Bulletin117-Section E
Please contact fabric supplier directly for further flammability information pertaining to specific upholstery.
Special ConditionsAcknowledgements will give the estimated delivery date of the finished product. Some upholstery is imported, and availability mayaffect estimated delivery time. For large projects, please contact fabric supplier directly for availability of yardage.
Grade 2
Krug Textiles - Leather ProgramGrade 8
Black K13.1000 Graphite K13.4000Stone K13.3000 Espresso K13.8000Sand K13.5000 White K13.9000
Please contact Customer Service for specific information on leathers, available colors and lead times.
August 2019
HEALTHCARE | USA | 9
CUSTOMER’S OWN MATERIAL - C.O.M.
Customer’s Own Material (COM/COL)COM/COL must be received three weeks prior to the acknowledgedship date. Orders with COM/COL not received by the required deadlinewill be delayed. A description of the upholstery cover, including sup-plier name, pattern name, upholstery cover name and color numbermust be included with the purchase order.COM/COL testing requires 3 business days and samples are to bedirected to Customer Service. The customer has the option of providing the sample COM/COL before, at time of order, or once thesample COM/COL is received. If the customer does not send a samplefor approval in advance of sending actual material, Krug will not beresponsible for the cost of any upholstery cover or other material that it determines to be unsuitable for the product or ourprocess.When the COM/COL upholstery cover is received at Krug, it mustbe clearly identified with the upholstery cover name and color, andtagged with name of the Krug customer and purchase order number.Krug will inspect all COM/COL upholstery covers when received todetermine if it will be suitable for upholstery. Where Krug feels thatthe upholstery cover or leather specified will compromise the qualityor integrity of our products, customers will be contacted to directthese concerns. Further, Krug reserves the right to refuse to acceptand use any COM upholstery covers or leathers that will compromiseour products in any way that is unacceptable to Krug. Krug cannotassume responsibility for the durability or tailoring quality of customer’s own material.Yardage specified in this price guide is approximate. In the case ofmultiple product orders, multiply the number of items by the COMyardage specified to determine upholstery cover required, unlessotherwise indicated. Additional yardage may be needed if the material is less than 54” wide, or patterned or striped and requiresmatching. All COMs are cut “up the roll” unless otherwise stated bythe customer. All striped upholstery covers will be applied verticallyunless otherwise stated by the customer and after approval by Krug.Krug will not be responsible for directional or positional problems with its application of COM material, unless it has beenprovided with explicit instructions by the customer. Special instructionsshould be sent to Krug Customer Service, including a sample (or photocopy) of the upholstery cover. Krug is not responsible forinstructions sent with the upholstery cover rolls, or for the methodof upholstery if no instructions have been provided.Price increases and freight charges to COM/COL acquired on thecustomer’s behalf will be passed onto the customer.
Application of Directional Upholstery coverSome COM upholstery covers will be considered directional by Krugeven though they are not considered directional by the supplier. AllCOMs are automatically cut “up the roll” unless otherwise statedby the customer (please see below).
COM/COL Shipping ProceduresFor seating COM/COL upholstery covers, please send upholsterycovers to: Krug Inc.
111 Ahrens StreetKitchener, OntarioCanada N2H 4C2Attention: RECEIVER
COM/COL orders cannot be scheduled into production until the up-holstery cover has arrived and inspection is complete.
All packages must be clearly marked‘‘For Customs Clearance by Willson International Custom Brokers’’.
According to the North American Free Trade Agreement (NAFTA),goods shipped between the United States and Canada can qualifyfor exemption from all duties, or for a reduction in duties, if the goodscan be proven to originate in either the United States, Canada orMexico.Canada Customs requires that a NAFTA Certificate of Origin and aCommercial Invoice be completed and sent with the upholsterycover shipment. The Commercial Invoice must clearly state the description of the upholstery cover, the selling price, the make-upor content, and the purchaser. The absence of these two documentswill delay the shipments at the U.S./Canada border, thereby potentiallydelaying the customer order. If the total value of the shipment is lessthan $1200 U.S., Customs will accept a Low Value Statement of Origin in place of the NAFTA Certificate of Origin. The Low ValueStatement must be signed by a representative of the exporting company. This statement may either be included on the commercialinvoice or attached to the invoice. Krug is happy to answer anyquestions or concerns about COM/COL shipping procedures andthe required documents.
CAL 133 & Moisture BarrierCalifornia Technical Bulletin 133 is a flammability test for seating.Krug offers a compliance method which, in combination with non-flammable upholstery covers, may enable the products to meetcertification requirements for this test. This process at the same timealso provides the products with a Moisture Barrier - a treatment thathelps to prevent the passage of liquids and moisture to inside of upholstered components - thereby conferring sanitary and anti-infectionbenefits. So when CAL 133 is specified, the product also automaticallyhas a Moisture Barrier, and when a Moisture Barrier is specified, theproduct also features the compliance method and low flammabilityfeatures of CAL 133.The application of this upcharge and the compliance method doesnot mean that the specific configuration of product and upholsterycover are tested and officially certified as being CAL 133 compliant.If official certification is required, Krug will provide this (through an independent certified testing laboratory) at a charge of $700 peritem, plus the cost of the product to be tested. Lead time for certification testing is typically 4-8 weeks. Krug assumes no responsibilityfor the testing of our products in combination with upholstery covers,or for the results of any testing conducted. Some specific configurationsof product and upholstery have already been tested. Please contactCustomer Service for additional information.
C.O.L. YardageTo calculate C.O.L. yardage required, please use the following conversions based on COM yardage: Leather must be ordered insquare footage. - 17 square feet in a yard
- Approx. 3 yards in a hide- Approx. 51 square feet in a hide- Please use grade 3 pricing for COL
Upholstery Cover Yardage CalculationTo calculate yardage required for COM and other non-standardupholstery cover orders, please contact Krug Customer Service at1.888.578.5784. Unless otherwise stated, upholstery cover rolls areassumed to be a minimum 54” wide. Please use the guide below tocalculate the percentage of extra upholstery cover required to coverlarge repeats. The repeat is calculated by adding both the verticaland horizontal measurements together and then referring to the chartbelow for extra yardage required.
Non-Standard-Cutacross the roll “railroad”
Standard-Cut “up the roll”
2”-14” 15”-19” 20”-27” 28”-36”
FABRIC Plain Repeat Repeat Repeat Repeat
54 0% 10% 15% 20% 25%
53-50 16% 20% 25% 30% 35%
48 16% 25% 30% 35% 40%
45 40% 50% 55% 60% 65%
36 50% 60% 65% 70% 75%
August 2019
10 | USA | HEALTHCARE
KRUGEXPRESS PROGRAM
PROGRAM DETAILSKrugExpress orders are ready to ship by the date acknowledged. Delivery and shipping schedules may result in actual shipping of orders ata later date. Statutory holidays and scheduled factory vacations may add to acknowledged lead times of KrugExpress orders. Unless otherwise specified on the order, the customer’s standard method of shipping Krug products will be utilized.
Available factory capacity for KrugExpress is filled by orders received on a ‘‘first come, first serve’’ basis. If the normal KrugExpress leadtime is not available for your order because available capacity has been filled, you will be immediately advised of the earliest available ready-to-ship date. Please consult your Customer Service representative in advance if you wish to confirm the specific lead time availabilityfor a KrugExpress order.
Orders must be received by midnight of a given day for that day to be considered the official day the order is received. Order lead times areacknowledged from the date the order is received, but not including the date the order is received.
KrugExpress orders must be ‘‘clean’’ when received in order to be considered officially received on a given day, and lead times will be acknowledged from the date orders are determined to be ‘‘clean’’. Changes to KrugExpress orders are not allowed under any circumstances.
Orders for product on KrugExpress must clearly state: ‘‘KrugExpress’’.
COM and graded-in upholstery is available on Krug Express. Orders are scheduled on Krug Express, and given the best available date,when the upholstery is received at Krug. Some conditions apply.
SEATING PROGRAMOrders for seating products on the KrugExpress program may be subject to quantity maximums. Please contact Krug CustomerService for more information.
Quantity maximums are dependent upon available capacity, in order to insure that we ship all orders on time.
Please note that the CAL 133 option is not available on KrugExpress.
SOLID SURFACE PROGRAM
The Solid Surface option provides an enhanced durability, protection and cleanability. It is available in 8 standard colors and is replaceableif it becomes damaged or degraded. See individual products for list upcharge chart.
Glacier White Cameo White
Bisque Linen
Antarctica Savannah
Dove Deep Night Sky
GROUP GRADE A - WHITE
GROUP GRADE A - COLOR
GROUP GRADE B
GROUP GRADE C
August 2019
HEALTHCARE | USA | 11
FAERONWOOD | LEED CI CREDIT SUMMARY
Faeron Wood Guest
22.72% Steel
17.05% Plywood
9.09% Cardboard
2.27% Steel Seat Springs
6.82% Fabric
22.73% Hardwood
19.32% Urethane Foam
CONTRIBUTES TO
CREDIT 2.1 - 2.2 Construction Waste Management 1-2 point(s)
CREDIT 3.3 Resource Reuse 1 point
CREDIT 4.1 Recycled Content 1 point
CREDIT 4.5 Low Emitting Materials,
Systems & Seating 1 point
CREDIT 5.1 Regional Materials* 1 point
CREDIT 7 Certified Wood 1 point(s)
( MUST BE REQUESTED)
*This credit is only applicable if in total 20% of the combined value of the procurement of construction materials and in the furniture are
manufactured within a radius of 500 miles. This credit will apply if the installation of the finished product occurs within 500 miles of Kitchener, Ontario.
level® CERTIFICATION, AIR-EMISSIONS AND FSC® CERTIFICATION
level® CERTIFICATIONBIFMA’s e3 Furniture Sustainability Standard is a voluntary, multi-attribute standard that measures the degreeof sustainability of furniture. This standard evaluates product and company environmental attributes andcompliance systems in a wide range of elements which include Materials, Energy & Atmosphere, Human &Ecosystem Health and Social Responsibility. Cressida products have earned level®, BIFMA‘s sustainabilitycertification program for furniture, certification through third-party verification against the e3 standard.
AIR-EMISSIONSAll Faeron products are supplied air-emissions certified. Contact customer service for information.
FSC®
In 2005, Krug received Forest Stewardship Council® (FSC®) Chain-of-Custody certification for our manufacturingfacilities. The FSC® Chain-of-Custody tracks certified wood from seedling to final sale. It signifies that thegrowth, harvesting and production of goods are entirely achieved through responsible forestry, which guaranteesa healthy supply of forest resources for generations to come. Contact customer service for further information, pricing and leadtimes.
Architects, designers, and building professionals can specify FSC®-certified products in order to achieve apoint from the US. Green Building Council's Leadership in Energy and Environmental Design (LEED) RatingSystem.
MATERIAL CONTENT:
PRE-CONSUMERRECYCLED CONTENT = 6.25%
POST-CONSUMERRECYCLED CONTENT = 13.64%
Up to 31.82% of this Faeron productis recyclable at the end of its usefullife.
August 2019
FAERONWOOD | GUEST, PATIENT, MULTIPLE & EASY ACCESS FEATURES
CLEAN OUTAll Faeron seating models have a built-in cleanout feature: a space at the back of the seatthat allows dirt, debris and liquid to fall to thefloor for easy clean up and maintenance - designed so that it does not detract from thecomfort or appearance of the product.
FLEX BACKThe ergonomically designed back has beendesigned with a slight flexing action, to en-hance the level of long-term sitting comfort,and provide greater ease of egress.
WALL SAVERThe angle of the back and the rear legs aredesigned to keep the back away from thewall, to prevent wear and damage to both thechairs and to the walls of the facility.
STEEL SEAT FRAMESteel seat frames are joined to othercomponents with hardened steel bolts andinserts, ensuring exceptional durability andstrength. In addition they ease re-configura-bility and on-site replacement of damaged ordegraded components.
SEAT COMFORTSeats feature a spring suspension across the en-tire model range for exceptional comfort whilehigh grade foam provides superior support andlongevity.
WEIGHT CAPACITIESFaeron weight capacities are as follows:Guest & Patient Chairs (21” & 24”) - 500 lbsPlus Chairs (30” & 44”) - 750 lbsEasy Access Chairs - 500 lbsMultiple Seating & Pre-configured - 500 lbsper seat2-Seat Freespan - 625 lbs per unit3-Seat Freespan - 750 lbs per unit
FINISH DURABILITYThe Krug’s finish, a proprietary catalyzed varnish formulation,has been repeatedly shown, through independent laboratorytesting, to be the industry leader in durability and abrasion re-sistance. The Krug finish looks better longer than competitors,and is uniquely suited to the demands of healthcareenvironments.
LATEX FREEKrug products are made with latex-free materials to prevent theallergic reaction that latex causes in some people.
REPLACEABLE COMPONENTSFaeron chairs are uniquely designed to allow virtually all majorcomponents to be field replaced, providing a very cost effectivemeans to significantly extend the life of the product. Seats,backs, frames are field replaceable. Pricing and model numbers can be viewed online at www.krug.ca.
CUSTOM CAPABILITIESModifications in dimension, seat and back shape or thickness, and other modifications are possible with Krug's capability to customize for specific requirements and needs. We can also provide custom finishes.
12 | USA | HEALTHCARE
August 2019
FAERONWOOD | GUEST, PATIENT, MULTIPLE & EASY ACCESS OPTIONS
ARM PANELPanel arms are available in semi and fully closed stylesfor optimum design flexibility.
URETHANE ARM CAPThe optional Urethane Arm Cap provides enhanceddurability and protection for the arms. This is fieldreplaceable if this becomes damaged or degraded and isavailable in three colors; Black, Grey and Taupe.
SOLID SURFACE ARM CAPThe optional Solid Surface Arm Cap provides enhanceddurability, protection and cleanability for the arms.This is field replaceable if this becomes damaged ordegraded and is available in 8 standard colors.
SOLID SURFACE ARM FRAME The optional Solid Surface Arm provides a fully seamlessarmrest for enhanced durability, protection andcleanability. It is available in 8 standard colors andreplaceable as a full side frame if it becomes damagedor degraded.
COMBINATION UPHOLSTERY OPTIONSFaeron can be upholstered in combinations of two ormore upholstery covers on the same units: seats, backsand closed arm panels can be individually upholsteredwith a specific cover. When combination upholstery iswith upholstery of the same grade or COM, an upchargefor dual fabrics is $25 list per unit and $49 list per unitfor three fabrics will be applied. When graded-incombination upholstery is selected, use the highestupholstery selected or contact Customer Service for aquote (please provide the fabrics specified and adescription of where each fabric is to be applied on theproduct in order to obtain a quote)
KINETIC BACK OPTIONProvides the chair back with a very pleasant andcomfortable rocking motion, which can significantlyenhance long-term sitting for patients and guests alike.The durable spring-loaded mechanism provides a rangeof motion of 20 degrees, and can be field-installed orreplaced. It's available on any Faeron Guest or Patientchair back with the exception of the Plus styles (30" and44").
CLEANABLE UNDER-SEAT SPLASHGUARDAll Faeron seating models are available with a plasticmoisture barrier that covers and encloses the underside ofthe seat (while still allowing air transfer and ventilation in andout of the seat cushion). The Splashguard significantlyenhances the germ resistance properties of the product, byenclosing the part of the chair that can be most susceptibleto infection-causing pathogens. The Splashguard is asmooth, easy to clean surface, either while on the chair orwhen removed, and is also field replaceable.
GANGING All Faeron freestanding Guest/Patient chairs can beganged using a ganging bracket. The powder coatedmetal bracket is fastened to the inside face of each sideframe. Ganging Brackets are available for an upchargeof $44 list per chair.
REMOVABLE COVERS Faeron chairs (all sizes) are available with removeableseat and back covers. Replacement seat and backcovers can be quickly installed on Faeron products thatwere originally ordered with the Removeable coveroption. Replacement seat and back covers can also beinstalled on Faeron products that were not originallyordered with the removeable cover option, with some
simple staple removal on the original seats and backs
MOISTURE BARRIER & CAL 133California Technical Bulletin 133 is a flammability test forseating. Krug offers a compliance method, in combinationwith non-flammable upholstery covers, may enable products to meet certification requirements for this test.This process at the same time also provides the productswith a Moisture Barrier - a treatment that helps to preventthe passage of liquids and moisture to inside of the uphostered components - thereby conferring sanitaryand anti-infection benefits. So when CAL 133 is specified,the product also automatically has a Moisture Barrier,and when a Moisture Barrier is specified, the productalso features the compliance method and low flammabilityfeatures of CAL 133.
The application of this up-charge and the compliancemethod does not mean that the specific configuration ofproduct and upholstery cover are tested and officiallycertified as being CAL133 compliant. If the official certification is required, Krug will provide this (throughan independent certified testing laboratory) at a chargeof $700 per item, plus the cost of the product to be tested.Lead time for certification testing is typically 4-8 weeks. Krug assumes no responsibility for the testing of ourproducts in combination with upholstery covers, or forthe results of any testing conducted. Some specificconfigurations of products and upholstery have alreadybeen tested. Please contact Customer Service for ad-ditional information. CAL 133 and Moisture Barrier isavailable for $49 list per yard
HEALTHCARE | USA | 13
August 2019
FAERONWOOD | GUEST
ORDERING NOTES: Combination upholstery (more than one upholstery cover within the same unit) is an option on all Faeron upholstered products. When combination upholsteryis with upholstery of the same grade or COM, an upcharge for dual fabrics is $25 list per unit and $49 list per unit for three fabrics. When graded in combination upholstery is selected, use the highest grade upholstery selected or contact Customer Service for a quote -please provide the fabrics specified anda description of where each fabric is to be applied on the product in order to obtain a quote.
WEIGHT CAPACITIESFaeron weight capacities are as follows:Guest Chairs (21” & 24”) - 500 lbsPlus Guest Chairs (30” & 44”) - 750 lbs
FEATURES:
For a complete list of features see page 12.
DIMENSIONS & COM REQUIREMENTS
Note: Some vinyls, leathers & upholsteries are not suitable for application on Faeron seating.The approval process is as follows:1. A sample of the COM must be provided to Krug Customer Service prior to or at the time of order. 2. The sample will be reviewed and the customer advised if the fabric is unsuitable.3. The COM fabric or leather will be inspected when received at the factory, to identify any further concerns with its suitability.
Height of WidthOverall Overall Overall Seat Arms from Between Seat ShippingWidth Depth Height Height Floor Arms Depth Weight Cube
21” Seat 25.0 26.3 34.5 19.0 25.0 21 19.5 44 14
24” Seat 28.0 26.3 34.5 19.0 25.0 24 19.5 48 19
30” Seat 34.0 26.3 34.5 19.0 25.0 30 19.5 54 20
44” Seat 48.0 26.3 34.5 19.0 25.0 44 19.5 71 28
COM- YARDAGE REQUIREMENTSCOM Yardage COM Yardage COM Yardage COM YardageSeat & Back Seats Only Back Only Closed Arm Panel
21” & 24” - One Chair 1.6 0.9 1.4 0.8
30” - One Chair 2.3 0.9 1.4 0.8
44” - One Chair 2.9 1.5 1.6 0.8
Faeron Option Upcharges $ List $ List
CAL 133 & Moisture Barrier (per yard) 49 Solid Surface Arm Cap (per pair) - A White 278Ganging Bracket 44 Solid Surface Arm Cap (per pair) - Gr A Color 286Kinetic Back (not available for Plus) 92 Solid Surface Arm Cap (per pair) - Gr B 30221” & 24” Under-seat Splashguard 44 Solid Surface Arm Cap (per pair) - Gr C 313Removeable Seat Covers 68 Solid Surface Arm (per pair) - A White 437Removable Back Covers 44 Solid Surface Arm (per pair) - Gr A Color 456Urethane Arm Cap (per pair) 105 Solid Surface Arm (per pair) - Gr B 492
Solid Surface Arm (per pair) - Gr C 517
14 | USA | HEALTHCARE
August 2019
FAERONWOOD | GUEST
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL Species 1 2 3 4 5 6 7 8 9
PRODUCT CODE KEY
Line Series Chair Type Size Arm Type Arm Style
Faeron Chair Guest Seating Open Arm No Cap
Semi Closed Arm Urethane Cap
Closed Arm Solid Surface Cap
Solid Surface Arm
FAE 21
24
O
S
21” Open ArmFAE2-G21ONC Beech Palette
21” Semi Closed ArmFAE2-G21SNC Beech Palette
21” Closed ArmFAE2-G21CNC Beech Palette
24” Open ArmFAE2-G24ONC Beech Palette
24” Semi Closed ArmFAE2-G24SNC Beech Palette
24” Closed ArmFAE2-G24CNC Beech Palette
30
44
C
G2 NC
UC
SC
SA
ORDERING NOTES: Faeron chairs can be specified with Urethane Arm Caps (UC), Solid Surface Arm Caps (SC) or Solid Surface Arm (SA),replace “NC” in the model number with the Arm Style selection below and add the upcharge listed on page 14.
863 897 932 1001 1070 1140 1210 1279 1418
1173 1225 1277 1381 1486 1590 1694 1799 2007
1183 1234 1287 1391 1496 1600 1704 1809 2016
924 959 994 1064 1133 1203 1272 1341 1481
1235 1288 1340 1444 1548 1653 1757 1861 2070
1245 1297 1350 1454 1558 1663 1767 1871 2079
HEALTHCARE | USA | 15
August 2019
FAERONWOOD | GUEST
PRODUCT CODE KEY
Line Series Chair Type Size Arm Type Arm Style
Faeron Chair Guest Seating Open Arm No Cap
Semi Closed Arm Urethane Cap
Closed Arm Solid Surface Cap
Solid Surface Arm
FAE 21
24
O
S
30” Open ArmFAE2-G30ONC Beech Palette
30” Semi Closed ArmFAE2-G30SNC Beech Palette
30” Closed ArmFAE2-G30CNC Beech Palette
44” Open ArmFAE2-G 44ONC Beech Palette
44” Semi Closed ArmFAE2-G 44SNC Beech Palette
44” Closed ArmFAE2-G 44CNC Beech Palette
30
44
C
G2 NC
UC
SC
SA
1055 1105 1154 1254 1355 1455 1554 1654 1854
1365 1433 1500 1635 1770 1904 2040 2174 2443
1375 1442 1509 1645 1779 1914 2049 2183 2452
1296 1359 1422 1548 1674 1800 1926 2052 2304
1607 1687 1768 1928 2089 2250 2410 2571 2893
1616 1696 1777 1938 2098 2259 2420 2580 2903
ORDERING NOTES: Faeron chairs can be specified with Urethane Arm Caps (UC), Solid Surface Arm Caps (SC) or Solid Surface Arm (SA),replace “NC” in the model number with the Arm Style selection below and add the upcharge listed on page 14.
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL Species 1 2 3 4 5 6 7 8 9
16 | USA | HEALTHCARE
August 2019
S C S A A
F C G O N
S U
C S
S
FAERONWOOD | LEED CI CREDIT SUMMARY
Faeron Wood Patient
CONTRIBUTES TO
CREDIT 2.1 - 2.2 Construction Waste Management 1-2 point(s)
CREDIT 3.3 Resource Reuse 1 point
CREDIT 4.1 Recycled Content 1 point
CREDIT 4.5 Low Emitting Materials,
Systems & Seating 1 point
CREDIT 5.1 Regional Materials* 1 point
CREDIT 7 Certified Wood 1 point(s)
( MUST BE REQUESTED)
*This credit is only applicable if in total 20% of the combined value of the procurement of construction materials and in the furniture are
manufactured within a radius of 500 miles. This credit will apply if the installation of the finished product occurs within 500 miles of Kitchener, Ontario.
level® CERTIFICATION, AIR-EMISSIONS AND FSC® CERTIFICATION
level® CERTIFICATIONBIFMA’s e3 Furniture Sustainability Standard is a voluntary, multi-attribute standard that measures the degreeof sustainability of furniture. This standard evaluates product and company environmental attributes andcompliance systems in a wide range of elements which include Materials, Energy & Atmosphere, Human &Ecosystem Health and Social Responsibility. Faeron products have earned level®, BIFMA‘s sustainabilitycertification program for furniture, certification through third-party verification against the e3 standard.
AIR-EMISSIONSAll Faeron products are supplied air-emissions certified. Contact customer service for information.
FSC®
In 2005, Krug received Forest Stewardship Council® (FSC®) Chain-of-Custody certification for our manufacturingfacilities. The FSC® Chain-of-Custody tracks certified wood from seedling to final sale. It signifies that thegrowth, harvesting and production of goods are entirely achieved through responsible forestry, which guaranteesa healthy supply of forest resources for generations to come. Contact customer service for further information,pricing and leadtimes.
Architects, designers, and building professionals can specify FSC®-certified products in order to achieve apoint from the US. Green Building Council's Leadership in Energy and Environmental Design (LEED) RatingSystem.
20.41% Hardwood
7.1% Fabric
20.41% Plywood
19.39% Urethane Foam
20.41% Steel
10.2% Cardboard
2% Urethane Foam
MATERIAL CONTENT:
PRE-CONSUMERRECYCLED CONTENT = 5.61%
POST-CONSUMERRECYCLED CONTENT = 14.18%
Up to 33.61% of this Faeron productis recyclable at the end of its usefullife.
HEALTHCARE | USA | 17
August 2019
FAERON WOOD | PATIENT
DIMENSIONS & COM REQUIREMENTS
Height of Width Overall Overall Overall Seat Arms from Between Seat ShippingWidth Depth Height Height Floor Arms Depth Weight Cubes
21" Seat 25.0 26.3 45.0 19.0 25 21 19.5 49 17
24" Seat 28.0 26.3 45.0 19.0 25 24 19.5 53 22
30” Seat 34.0 26.3 45.0 19.0 25 30 19.5 64 28
Note: Some vinyls, leathers & upholsteries are not suitable for application on Faeron seating.The approval process is as follows:1. A sample of the COM must be provided to Krug Customer Service prior to or at the time of order. 2. The sample will be reviewed and the customer advised if the fabric is unsuitable.3. The COM fabric or leather will be inspected when received at the factory, to identify any further concerns with its suitability.
ORDERING NOTES: Combination upholstery (more than one upholstery cover within the same unit) is an option on all Faeron upholstered products. When combination upholsteryis with upholstery of the same grade or COM, an upcharge for dual fabrics is $25 list per unit and $49 list per unit for three fabrics. When graded in combination upholstery is selected, use the highest grade upholstery selected or contact Customer Service for a quote -please provide the fabrics specifiedand a description of where each fabric is to be applied on the product in order to obtain a quote.
WEIGHT CAPACITIESFaeron weight capacities are as follows:Patient Chairs (21” & 24”) - 500 lbsPlus Patient Chair (30”) - 750 lbs
FEATURES:For a complete list of features see page 12.
COM - YARDAGE REQUIREMENTS COM Yardage COM Yardage COM Yardage COM Yardage
Seats & Backs Only Seat Only Back Only Closed Arm Panel
21” & 24” - One Chair 2.0 0.9 2.0 0.8 30” Plus - One Chair 3.0 0.9 2.0 0.8
Faeron Guest Option Upcharges $ List $ List
CAL 133 & Moisture Barrier (per yard) 49 Solid Surface Arm Cap (per pair) - A White 278Ganging Bracket 44 Solid Surface Arm Cap (per pair) - Gr A Color 286Kinetic Back (not available for Plus) 92 Solid Surface Arm Cap (per pair) - Gr B 30221” & 24” Under-seat Splashguard 44 Solid Surface Arm Cap (per pair) - Gr C 313Removeable Seat Covers 68 Solid Surface Arm (per pair) - A White 437Removable Back Covers 44 Solid Surface Arm (per pair) - Gr A Color 456Urethane Arm Cap (per pair) 105 Solid Surface Arm (per pair) - Gr B 492
Solid Surface Arm (per pair) - Gr C 517
18 | USA | HEALTHCARE
August 2019
FAERON WOOD | PATIENT
PRODUCT CODE KEY
Line Series Chair Type Size Arm Type Arm Style
Faeron Chair Patient Seating Open Arm No Cap
Semi Closed Arm Urethane Cap
Closed Arm Solid Surface Cap
Solid Surface Arm
FAE 21
24
O
S
21” Open ArmFAE2-P21ONC Beech Palette
21” Semi Closed ArmFAE2-P21SNC Beech Palette
21” Closed ArmFAE2-P21CNC Beech Palette
24” Open ArmFAE2-P24ONC Beech Palette
24” Semi Closed ArmFAE2-P24SNC Beech Palette
24” Closed ArmFAE2-P24CNC Beech Palette
30 C
P2 NC
UC
SC
SA
905 949 992 1079 1166 1252 1339 1426 1600
1215 1276 1337 1459 1581 1703 1824 1946 2189
1225 1286 1347 1468 1590 1712 1834 1956 2198
957 1001 1044 1131 1217 1305 1392 1479 1652
1268 1329 1390 1511 1633 1755 1877 1999 2241
1277 1338 1399 1521 1643 1764 1886 2008 2251
ORDERING NOTES: Faeron chairs can be specified with Urethane Arm Caps (UC), Solid Surface Arm Caps (SC) or Solid Surface Arm (SA),replace “NC” in the model number with the Arm Style selection below and add the upcharge listed on page 18.
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL Species 1 2 3 4 5 6 7 8 9
HEALTHCARE | USA | 19
August 2019
FAERON WOOD | PATIENT
PRODUCT CODE KEY
Line Series Chair Type Size Arm Type Arm Style
Faeron Chair Patient Seating Open Arm No Cap
Semi Closed Arm Urethane Cap
Closed Arm Solid Surface Cap
Solid Surface Arm
FAE 21
24
O
S
30” Open ArmFAE2-P30ONC Beech Palette
30” Semi Closed ArmFAE2-P30SNC Beech Palette
30” Closed ArmFAE2-P30CNC Beech Palette
30 C
P2 NC
UC
SC
SA
1106 1171 1236 1367 1498 1628 1758 1888 2149
1417 1500 1583 1748 1913 2077 2243 2408 2738
1426 1509 1592 1757 1922 2087 2253 2418 2747
ORDERING NOTES: Faeron chairs can be specified with Urethane Arm Caps (UC), Solid Surface Arm Caps (SC) or Solid Surface Arm (SA),replace “NC” in the model number with the Arm Style selection below and add the upcharge listed on page 18.
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL Species 1 2 3 4 5 6 7 8 9
20 | USA | HEALTHCARE
August 2019
S C S A A
F C P O N
S U
C S
S
FAERON WOOD | MULTIPLE SEATING INSTRUCTIONS
To aid you in the process of specifying and ordering Faeron Multiple Seating, we have compiled the following summary. It explains the three different types ofFaeron Multiple Seating – (a) Pre-Configured, (b) Start, Center & End Units and (c) the Freespan Multiple Units – including the features and considerations ofeach type, to assist in selecting the one that best suits each application. It is a requirement for all Faeron Multiple Seating orders, a drawing or plan view layoutmust accompany the order, so that we can verify that the specification is correct.
When building your multiple seating layout, please note that your order should start from left to right as you are facing the configuration.
Pre-Configured Multiple UnitsPre-Configured Multiple Units are designed to be used when you have seating configurations that are 2-3 chair units in size.
Considerations if choosing to use Pre-Configured Units:• Linking tables can be joined to either end of a Pre-Configured Multiple Unit, but not in-between• There are no limitations to the number of Pre-Configured Multiple units that can be ganged together with the Faeron Linking Tables• Pre-Configured Multiple Units are not available in 30” or 44” plus widths• Pre-Configured Multiple Units are not designed to work with other multiple seating (Start, Center, End Units or Freespan Units) unless a Faeron
Linking Table or linking brackets are used in-between the different types of multiple seating.• Pre-Configured Multiple Units are built from Start, Center and End Units and therefore, can be reconfigured to singular or two-seat units.
However, you may have to purchase additional components (arms, etc…) to be able to do this. See line drawings below for possible configurationsthat can be made from taking apart the Pre-Configured Multiple Units.
*Please note:Example #1-A requires an additional end unit arm for chair A, and a start unit arm for chair B.
Example #1-B requires an additional end unit arm for chair A, a start and end unit arm for chair B, and a start unit arm for chair C.
Start, Center and End Multiple Seating UnitsStart, Center and End Multiple Units are designed to be used when you have seating configurations that are greater than three chair units in size,and/or include 30” or 44” units. Also, before you start to build your multiple seating layout, please note that your order should start from left to right as you arefacing the chair, therefore begin the configuration with a Start Unit, then move to a Center Unit and finish with an End Unit.
Considerations if choosing to use Start, Center and End Multiple Units:• Start, Center and End units are available in all widths (21”, 24”, 30” & 44”)• There are no limitations to the amount of center units that can be ganged to a start or an end unit• Faeron Linking Tables can be joined to any Faeron Start or End unit only (this is because the units are engineered with the finished arms)
EXAMPLE #1
EXAMPLE #1-A
EXAMPLE #1-B
HEALTHCARE | USA | 21
August 2019
22 | USA | HEALTHCARE
FAERON WOOD | MULTIPLE SEATING INSTRUCTIONS
See below for sample configuration of when you would use Start, Center and End Multiple Units.
Freespan Multiple UnitsFreespan Multiple Units are designed to be used when you have seating configurations that are 2-3 chair units in size and a reduced number of legs are desirable. (see picture below).
Considerations if choosing to use Freespan Multiple Units:• Freespan Multiple Units come with a choice of a pre-configured unit with or without a center arm• The unit with the center arm increases the overall width of the unit by 1” per arm• Linking tables can be joined to either side of a Freespan Multiple Unit, but not in-between• There are no limitations to the number of Freespan Multiple units that can be ganged together with the Faeron Linking Tables or linking brackets.• Freespan Multiple Units are not available in 30” or 44” plus widths• Freespan Multiple Units are not designed to work with other multiple seating (Start, Center, End Units or Freespan Units) unless a Faeron Linking Table or
linking brackets are used in-between the different types of multiple seating.
Below illustrates possible configurations when you could use all three types of Faeron Multiple Seating together.
For more information on how to specify Faeron Multiple Seating, please contact Customer Service directly at 1-888-578-5784.
LegendCT- Corner TableFS – Freespan Multiple SeatingPG – Pre-Configured MultipleSeatingS – Start UnitC – Center UnitE – End UnitLT - Linking Table
CTPGPGPGLT
C
C
C
S S
E
E
LT
FS
FS
August 2019
HEALTHCARE | USA | 23
FAERON WOOD | MULTIPLE SEATING - PRECONFIGURED UNITS
WEIGHT CAPACITIESFaeron weight capacities are as follows:Guest & Patient Chairs (21” & 24”) - 500 lbs
DIMENSIONS & COM REQUIREMENTS
COM COM COM COM Height of Width Seat & Fabric Fabric Fabric
Overall Overall Overall Seat Arms Between Seat Shipping Back Seat Back Closed Arm Width Depth Height Height from Floor Arms Depth Weight Cube Yardage Yardage Yardage Panel Yardage
PCG21X2 48.3 26.3 34.5 19.0 25.0 21 19.5 76 28 3.0 1.5 2.1 1.2PCP21X2 48.3 26.3 45.0 19.0 25.0 21 19.5 86 38 3.8 1.5 3.0 1.2
PCG21X3 71.5 26.3 34.5 19.0 25.0 21 19.5 109 41 4.6 2.4 3.5 1.6PCP21X3 71.5 26.3 45.0 19.0 25.0 21 19.5 124 56 5.8 2.4 5.0 1.6
PCG24X2 54.3 26.3 34.5 19.0 25.0 24 19.5 83 31 3.0 1.5 2.1 1.2PCP24X2 54.3 26.3 45.0 19.0 25.0 24 19.5 93 43 3.8 1.5 3.0 1.2
PCG24X3 80.5 26.3 34.5 19.0 25.0 24 19.5 121 46 4.6 2.4 3.5 1.6PCP24X3 80.5 26.3 45.0 19.0 25.0 24 19.5 136 63 5.8 2.4 5.0 1.6
Note: Some vinyls, leathers & upholsteries are not suitable for application on Faeron seating. Please refer to page 9 for C.O.M approval process.
CONTRASTING BACKS, SEATS & CLOSED ARMS Combination upholstery (more than one upholstery cover within the same unit) is an option on all Faeron upholstered products. When combination upholsteryis with upholstery of the same grade or COM, an upcharge for dual fabrics is $23 list per unit and $46 list per unit for three fabrics. When graded in combinationupholstery is selected, use the highest grade upholstery selected or contact Customer Service for a quote -please provide the fabrics specified and a descriptionof where each fabric is to be applied on the product in order to obtain a quote.A drawing showing the configuration of the multiple seating and tables is required with each purchase order.
PRE-CONFIGURED MULTIPLE UNITS SEAT GUEST BACK PATIENT BACK CLOSED ARM PANEL
PC21x2 3.8 1.5 3.0 1.2PC21x3 5.8 2.4 5.0 1.6PC24X2 3.8 1.5 3.0 1.2PC24X3 5.8 2.4 5.0 1.6
FEATURES:
For a complete list of features see page 12.
Patient backs are available on multiple units, please change the model number FAE2-PCG to FAE2-PCP, and add the following upchargesper back:
Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 921” Chairs $48 57 68 87 105 125 144 164 20224” Chairs $52 62 72 91 111 130 149 168 207
ORDERING NOTES: Faeron Multiple chairs can be specified with Solid Surface (SC) arm caps or Solid Surface arm (SA),replace “NC” in the model number with the Arm Style selection and add the upcharge listed below.
Faeron Option Upcharges $ List $ List $ List
CAL 133 & Moisture Barrier (per yard) 49 Solid Surface Arm Cap (each) - A White 139 Solid Surface Arm Cap (pair) - A White 278Ganging Bracket 44 Solid Surface Arm Cap (each) - Gr A Color 143 Solid Surface Arm Cap (pair) - Gr A Color 286Kinetic Back (not available for Plus) 92 Solid Surface Arm Cap (each) - Gr B 151 Solid Surface Arm Cap (pair) - Gr B 30221” & 24” Under-seat Splashguard 44 Solid Surface Arm Cap (each) - Gr C 157 Solid Surface Arm Cap (pair) - Gr C 313Removeable Seat Covers 68 Solid Surface Arm (each) - A White 219 Solid Surface Arm (pair) - A White 437Removable Back Covers 44 Solid Surface Arm (each) - Gr A Color 228 Solid Surface Arm (pair) - Gr A Color 456Urethane Arm Cap (each) 53 Solid Surface Arm (each) - Gr B 246 Solid Surface Arm (pair) - Gr B 492
Solid Surface Arm (each) - Gr C 259 Solid Surface Arm (pair) - Gr C 517
August 2019
24 | USA | HEALTHCARE
FAERON WOOD | MULTIPLE SEATING - PRECONFIGURED UNITS
2 Seat - 21” Open Arm Pre-configured Unit, Guest Backs FAE2-PCG21X2ONC Beech
Palette
2 Seat - 21” Semi Closed Arm Pre-configured Unit, Guest Backs FAE2-PCG21X2SNC Beech
Palette
2 Seat - 21” Closed Arm Pre-configured Unit, Guest Backs FAE2-PCG21X2CNC Beech
Palette
2 Seat - 24” Open Arm Pre-configured Unit, Guest Backs FAE2-PCG24X2ONC Beech
Palette
2 Seat - 24” Semi Closed Arm Pre-configured Unit, Guest Backs FAE2-PCG24X2SNC Beech
Palette
2 Seat - 24” Closed Arm Pre-configured Unit, Guest Backs FAE2-PCG24X2CNC Beech
Palette
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL Species 1 2 3 4 5 6 7 8 9
PRODUCT CODE KEY
Line Series Chair Type Back Type Size Arm Type Arm Style
Faeron Chair Pre-configured Guest Open Arm No Cap Multiple Unit
Patient Semi Closed Arm Urethane Cap
Closed Arm Solid Surface Cap
Solid Surface Arm
FAE 21X2
24X2
O
S
21X3
24X3
C
PC2 NC
UC
SC
SA
G
P
1510 1580 1649 1789 1927 2066 2205 2344 2622
1997 2092 2188 2380 2571 2762 2953 3144 3526
2015 2111 2207 2399 2590 2781 2972 3163 3545
1645 1715 1784 1923 2063 2201 2341 2480 2758
2132 2228 2323 2514 2705 2896 3089 3280 3662
2151 2246 2342 2533 2724 2915 3107 3299 3681
ORDERING NOTES: Faeron chairs can be specified with Urethane Arm Caps (UC), Solid Surface Arm Caps (SC) or Solid Surface Arm (SA),replace “NC” in the model number with the Arm Style selection below and add the upcharge listed on page 23.
August 2019
HEALTHCARE | USA | 25
FAERON WOOD | MULTIPLE SEATING - PRECONFIGURED UNITS
L S C B S A A
F C P G O N M
P S U
C S
S
3 Seat - 21” Open Arm Pre-configured Unit, Guest Backs FAE2-PCG21X3ONC Beech
Palette
3 Seat - 21” Semi Closed Arm Pre-configured Unit, Guest Backs FAE2-PCG21X3SNC Beech
Palette
3 Seat - 21” Closed Arm Pre-configured Unit, Guest Backs FAE2-PCG21X3CNC Beech
Palette
3 Seat - 24” Open Arm Pre-configured Unit, Guest Backs FAE2-PCG24X3ONC Beech
Palette
3 Seat - 24” Semi Closed Arm Pre-configured Unit, Guest Backs FAE2-PCG24X3SNC Beech
Palette
3 Seat - 24” Closed Arm Pre-configured Unit, Guest Backs FAE2-PCG24X3CNC Beech
Palette
PRODUCT CODE KEY
Line Series Chair Type Back Type Size Arm Type Arm Style
Faeron Chair Pre-configured Guest Open Arm No Cap Multiple Unit
Patient Semi Closed Arm Urethane Cap
Closed Arm Solid Surface Cap
Solid Surface Arm
FAE 21X2
24X2
O
S
21X3
24X3
C
UC2 NC
UC
SC
SA
G
P
2146 2251 2355 2564 2771 2980 3188 3397 3814
2809 2948 3087 3365 3643 3921 4199 4478 5033
2838 2976 3116 3393 3671 3950 4228 4506 5061
2304 2372 2476 2685 2893 3102 3311 3519 3936
2968 3070 3209 3486 3765 4043 4321 4599 5155
2996 3098 3238 3515 3793 4071 4350 4628 5183
ORDERING NOTES: Faeron chairs can be specified with Urethane Arm Caps (UC), Solid Surface Arm Caps (SC) or Solid Surface Arm (SA),replace “NC” in the model number with the Arm Style selection below and add the upcharge listed on page 23.
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL Species 1 2 3 4 5 6 7 8 9
August 2019
26 | USA | HEALTHCARE
FAERON WOOD | MULTIPLE SEATING - START, CENTER & END UNITS
COM COM COM COM Fabric
Height of Width Seat & Fabric Fabric Closed Arm Overall Overall Overall Seat Arms Between Seat Shipping Back Seat Back Panel (Pair) Width Depth Height Height from Floor Arms Depth Weight Cube Yardage Yardage Yardage Yardage
SG21 25 26.3 34.5 19 25 21 19.5 44 14 1.6 0.9 1.4 0.8SP21 25 26.3 45 19 25 21 19.5 49 17 2.0 0.9 2.0 0.8SG24 28 26.3 34.5 19 25 24 19.5 48 19 1.6 0.9 1.4 0.8SP24 28 26.3 45 19 25 24 19.5 53 22 2.0 0.9 2.0 0.8SG30 34 26.3 34.5 19 25 30 19.5 54 20 2.3 0.9 1.4 0.8 SP30 34 26.3 45 19 25 30 19.5 64 28 3.0 0.9 2.0 0.8 SG44 48 26.3 34.5 19 25 44 19.5 71 28 2.9 0.9 1.6 0.8
FAERON MULTIPLE START UNITS
COM COM COM COM Fabric Height of Width Seat & Fabric Fabric Closed Arm
Overall Overall Overall Seat Arms Between Seat Shipping Back Seat Back Panel Width Depth Height Height from Floor Arms Depth Weight Cube Yardage Yardage Yardage Yardage
CG21 23 26.3 34.5 19 25 21 19.5 39 14 1.6 0.9 1.4 0.4 CP21 23 26.3 45 19 25 21 19.5 44 17 2.0 0.9 2.0 0.4CG24 26 26.3 34.5 19 25 24 19.5 43 19 1.6 0.9 1.4 0.4 CP24 26 26.3 45 19 25 24 19.5 48 22 2.0 0.9 2.0 0.4CG30 32 26.3 34.5 19 25 30 19.5 49 20 2.3 0.9 1.4 0.4 CP30 32 26.3 45 19 25 30 19.5 59 28 3.0 0.9 2.0 0.4CG44 46 26.3 34.5 19 25 44 19.5 66 28 2.9 0.9 1.6 0.4
FAERON MULTIPLE CENTER UNITS
DIMENSIONS & COM REQUIREMENTS
COM COM COM COM Height of Width Seat & Fabric Fabric Fabric
Overall Overall Overall Seat Arms Between Seat Shipping Back Seat Back Closed ArmWidth Depth Height Height from Floor Arms Depth Weight Cube Yardage Yardage Yardage Panel Yardage
EG21 25 26.3 34.5 19 25 21 19.5 39 14 1.6 0.9 1.4 0.4EP21 25 26.3 45 19 25 21 19.5 44 17 2.0 0.9 2.0 0.4EG24 28 26.3 34.5 19 25 24 19.5 43 19 1.6 0.9 1.4 0.4EP24 28 26.3 45 19 25 24 19.5 48 22 2.0 0.9 2.0 0.4EG30 34 26.3 34.5 19 25 30 19.5 49 20 2.3 0.9 1.4 0.4EP30 34 26.3 45 19 25 30 19.5 59 28 3.0 0.9 2.0 0.4EG44 48 26.3 34.5 19 25 44 19.5 66 28 2.9 0.9 1.6 0.4
When ordering more than one Start, Center or End unit, please refer to page 14 for COM yardage requirements for guest chairs or page 18 for COM yardagerequirements for patient chairs.
FAERON MULTIPLE END UNITS
ORDERING NOTES: A drawing showing the configuration of the multiple seating and tables is required with each purchase order. Combination upholstery (more than one upholstery cover within the same unit) is an option on all Faeron upholstered products. When combination upholsteryis with upholstery of the same grade or COM, an upcharge for dual fabrics is $25 list per unit and $49 list per unit for three fabrics. When graded in combinationupholstery is selected, use the highest grade upholstery selected or contact Customer Service for a quote -please provide the fabrics specified and a descriptionof where each fabric is to be applied on the product in order to obtain a quote.
WEIGHT CAPACITIESFaeron weight capacities are as follows:Guest & Patient Chairs (21” & 24”) - 500 lbs
FEATURES:
For a complete list of features see page 12.
Patient backs are available on multiple units, please change the model number FAE2-PCG to FAE2-PCP, and add the following upchargesper back: Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 921” Chairs $48 57 68 87 105 125 144 164 20224” Chairs $52 62 72 91 111 130 149 168 20730” Chairs $63 73 83 102 121 141 160 180 218
Faeron Option Upcharges $ List $ List $ List
CAL 133 & Moisture Barrier (per yard) 49 Solid Surface Arm Cap (each) - A White 139 Solid Surface Arm Cap (pair) - A White 278Ganging Bracket 44 Solid Surface Arm Cap (each) - Gr A Color 143 Solid Surface Arm Cap (pair) - Gr A Color 286Kinetic Back (not available for Plus) 92 Solid Surface Arm Cap (each) - Gr B 151 Solid Surface Arm Cap (pair) - Gr B 30221” & 24” Under-seat Splashguard 44 Solid Surface Arm Cap (each) - Gr C 157 Solid Surface Arm Cap (pair) - Gr C 313Removeable Seat Covers 68 Solid Surface Arm (each) - A White 219 Solid Surface Arm (pair) - A White 437Removable Back Covers 44 Solid Surface Arm (each) - Gr A Color 228 Solid Surface Arm (pair) - Gr A Color 456Urethane Arm Cap (each) 53 Solid Surface Arm (each) - Gr B 246 Solid Surface Arm (pair) - Gr B 492
Solid Surface Arm (each) - Gr C 259 Solid Surface Arm (pair) - Gr C 517
August 2019
HEALTHCARE | USA | 27
FAERON WOOD | MULTIPLE SEATING - START, CENTER & END UNITS
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL Species 1 2 3 4 5 6 7 8 9
21” Open Arm Start Unit, Guest Back FAE2-SG21ONC Beech
Palette
21” Semi Closed Arm Start Unit, Guest Back FAE2-SG21SNC Beech
Palette
21” Closed Arm Start Unit, Guest Back FAE2-SG21CNC Beech
Palette
24” Open Arm Start Unit, Guest Back FAE2-SG24ONC Beech
Palette
24” Semi Closed Arm Start Unit, Guest Back FAE2-SG24SNC Beech
Palette
24” Closed Arm Start Unit, Guest Back FAE2-SG24CNC Beech
Palette
30” Open Arm Start Unit, Guest Back FAE2-SG30ONC Beech
Palette
30” Semi Closed Arm Start Unit, Guest Back FAE2-SG30SNC Beech
Palette
30” Closed Arm Start Unit, Guest Back FAE2-SG30SNC Beech
Palette
44” Open Arm Start Unit, Guest Back FAE2-SG44ONC Beech
Palette
44” Semi Closed Arm Start Unit, Guest Back FAE2-SG44SNC Beech
Palette
44” Closed Arm Start Unit, Guest Back FAE2-SG44CNC Beech
Palette
Start
PRODUCT CODE KEY
Line Series Chair Type Back Type Size Arm Type Arm Style
Faeron Chair Start Unit Guest Open Arm No Cap Multiple Seating
Center Unit Patient Semi Closed Arm Urethane Cap Multiple Seating End Unit Closed Arm Solid Surface Cap Multiple Seating Solid Surface Arm
FAE 21
24
O
S
30 C
S2 NC
UC
SC
SA
G
PC
E
863 897 932 1001 1070 1140 1210 1279 1418
1173 1225 1277 1381 1486 1590 1694 1799 2007
1183 1234 1287 1391 1496 1600 1704 1809 2016
924 959 994 1064 1133 1203 1272 1341 1481
1235 1288 1340 1444 1548 1653 1757 1861 2070
1245 1297 1350 1454 1558 1663 1767 1871 2079
1055 1105 1154 1254 1355 1455 1554 1654 1854
1365 1433 1500 1635 1770 1904 2040 2174 2443
1375 1442 1509 1645 1779 1914 2049 2183 2452
1296 1359 1422 1548 1674 1800 1926 2052 2304
1607 1687 1768 1928 2089 2250 2410 2571 2893
1616 1696 1777 1938 2098 2259 2420 2580 2903
ORDERING NOTES: Faeron chairs can be specified with Urethane Arm Caps (UC), Solid Surface Arm Caps (SC) or Solid Surface Arm (SA),replace “NC” in the model number with the Arm Style selection below and add the upcharge listed on page 26.
August 2019
28 | USA | HEALTHCARE
FAERON WOOD | MULTIPLE SEATING - START, CENTER & END UNITS
21” Open Arm Center Unit, Guest Back FAE2-CG21ONC Beech
Palette
21” Semi Closed Arm Center Unit, Guest Back FAE2-CG21SNC Beech
Palette
21” Closed Arm Center Unit, Guest Back FAE2-CG21SNC Beech
Palette
24” Open Arm Center Unit, Guest Back FAE2-CG24ONC Beech
Palette
24” Semi Closed Arm Center Unit, Guest Back FAE2-CG24SNC Beech
Palette
24” Closed Arm Center Unit, Guest Back FAE2-CG24CNC Beech
Palette
30” Open Arm Center Unit, Guest Back FAE2-CG30ONC Beech
Palette
30” Semi Closed Arm Center Unit, Guest Back FAE2-CG30SNC Beech
Palette
30” Closed Arm Center Unit, Guest Back FAE2-CG30CNC Beech
Palette
44” Open Arm Center Unit, Guest Back FAE2-CG44ONC Beech
Palette
44” Semi Closed Arm Center Unit, Guest Back FAE2-CG44SNC Beech
Palette
44” Closed Arm Center Unit, Guest Back FAE2-CG44CNC Beech
Palette
Center
PRODUCT CODE KEY
Line Series Chair Type Back Type Size Arm Type Arm Style
Faeron Chair Start Unit Guest Open Arm No Cap Multiple Seating
Center Unit Patient Semi Closed Arm Urethane Cap Multiple Seating End Unit Closed Arm Solid Surface Cap Multiple Seating Solid Surface Arm
FAE 21
24
O
S
30 C
S2 NC
UC
SC
SA
G
PC
E
793 828 863 932 1001 1070 1141 1210 1349
969 1013 1056 1143 1229 1316 1403 1490 1664
978 1022 1065 1152 1238 1326 1413 1500 1673
855 890 924 995 1064 1133 1203 1272 1412
1032 1075 1119 1205 1292 1379 1466 1552 1727
1041 1084 1128 1214 1301 1389 1476 1562 1736
985 1036 1085 1185 1286 1385 1485 1585 1784
1162 1220 1278 1396 1514 1630 1748 1865 2099
1171 1229 1288 1405 1523 1640 1757 1875 2109
1227 1290 1353 1479 1605 1731 1857 1983 2235
1402 1475 1546 1689 1833 1976 2119 2263 2550
1412 1484 1556 1698 1842 1985 2129 2273 2559
ORDERING NOTES: Faeron chairs can be specified with Urethane Arm Caps (UC), Solid Surface Arm Caps (SC) or Solid Surface Arm (SA),replace “NC” in the model number with the Arm Style selection below and add the upcharge listed on page 26.
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL Species 1 2 3 4 5 6 7 8 9
August 2019
HEALTHCARE | USA | 29
L S C B S A A
F C G O N M
C P S U M E C S M S
FAERON WOOD | MULTIPLE SEATING - START, CENTER & END UNITS
21” Open Arm End Unit, Guest Back FAE2-EG21ONC Beech
Palette
21” Semi Closed Arm End Unit, Guest Back FAE2-EG21SNC Beech
Palette
21” Closed Arm End Unit, Guest Back FAE2-EG21CNC Beech
Palette
24” Open Arm End Unit, Guest Back FAE2-EG24ONC Beech
Palette
24” Semi Closed Arm End Unit, Guest Back FAE2-EG24SNC Beech
Palette
24” Closed Arm End Unit, Guest Back FAE2-EG24CNC Beech
Palette
30” Open Arm End Unit, Guest Back FAE2-EG30ONC Beech
Palette
30” Semi Closed Arm End Unit, Guest Back FAE2-EG30SNC Beech
Palette
30” Closed Arm End Unit, Guest Back FAE2-EG30CNC Beech
Palette
44” Open Arm End Unit, Guest Back FAE2-EG44ONC Beech
Palette
44” Semi Closed Arm End Unit, Guest Back FAE2-EG44SNC Beech
Palette
44” Closed Arm End Unit, Guest Back FAE2-EG44CNC Beech
Palette
End
PRODUCT CODE KEY
Line Series Chair Type Back Type Size Arm Type Arm Style
Faeron Chair Start Unit Guest Open Arm No Cap Multiple Seating
Center Unit Patient Semi Closed Arm Urethane Cap Multiple Seating End Unit Closed Arm Solid Surface Cap Multiple Seating Solid Surface Arm
FAE 21
24
O
S
30 C
S2 NC
UC
SC
SA
G
PC
E
ORDERING NOTES: Faeron chairs can be specified with Urethane Arm Caps (UC), Solid Surface Arm Caps (SC) or Solid Surface Arm (SA),replace “NC” in the model number with the Arm Style selection below and add the upcharge listed on page 26.
793 828 863 932 1001 1070 1141 1210 1349
969 1013 1056 1143 1229 1316 1403 1490 1664
978 1022 1065 1152 1238 1326 1413 1500 1673
855 890 924 995 1064 1133 1203 1272 1412
1032 1075 1119 1205 1292 1379 1466 1552 1727
1041 1084 1128 1214 1301 1389 1476 1562 1736
985 1036 1085 1185 1286 1385 1485 1585 1784
1162 1220 1278 1396 1514 1630 1748 1865 2099
1171 1229 1288 1405 1523 1640 1757 1875 2109
1227 1290 1353 1479 1605 1731 1857 1983 2235
1402 1475 1546 1689 1833 1976 2119 2263 2550
1412 1484 1556 1698 1842 1985 2129 2273 2559
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL Species 1 2 3 4 5 6 7 8 9
August 2019
30 | USA | HEALTHCARE
FAERON WOOD | MULTIPLE SEATING - FREESPAN UNITS
COM COM COM COM Height of Width Seat & Fabric Fabric Fabric Overall Overall Overall Seat Arms Between Seat Shipping Back Seat Back Closed Arm Width Depth Height Height from Floor Arms Depth Weight Cube Yardage Yardage Yardage Panel Yardage
PCFG21X2A 46.5 26.3 34.5 19 25.0 43.0 19.5 74 28 3.0 1.5 2.1 0.8PCFP21X2A 46.5 26.3 45.0 19 25.0 43.0 19.5 84 37 3.8 1.5 3.0 0.8PCFG21X3A 68.0 26.3 34.5 19 25.0 64.8 19.5 105 40 4.6 2.4 3.5 0.8PCFP21X3A 68.0 26.3 45.0 19 25.0 64.8 19.5 120 54 5.8 2.4 5.0 0.8PCFG24X2A 52.5 26.3 34.5 19 25.0 49.0 19.5 81 30 3.0 1.5 2.1 0.8PCFP24X2A 52.5 26.3 45.0 19 25.0 49.0 19.5 91 42 3.8 1.5 3.0 0.8PCFG24X3A 77.0 26.3 34.5 19 25.0 73.8 19.5 117 45 4.6 2.4 3.5 0.8PCFP24X3A 77.0 26.3 45.0 19 25.0 73.8 19.5 132 61 5.8 2.4 5.0 0.8
DIMENSIONS & COM REQUIREMENTS
Note: Some vinyls, leathers & upholsteries are not suitable for application on Faeron seating.The approval process is as follows:1. A sample of the COM must be provided to Krug Customer Service prior to or at the time of order. 2. The sample will be reviewed and the customer advised if the fabric is unsuitable.3. The COM fabric or leather will be inspected when received at the factory, to identify any further concerns with its suitability.
Unit COM COM COMWith Fabric Fabric FabricCenter Arm Closed Arm Closed Arm Closed Arm(Continued) Panels ( 2 Arms) Panels ( 3 Arms) Panels ( 4 Arms)
PCF21X2B 0.8 1.2 1.6 PCF21X3B 0.8 1.2 1.6PCF24X2B 0.8 1.2 1.6PCF24X3B 0.8 1.2 1.6
UNIT WITH NO CENTER ARM
UNIT WITH CENTER ARM (CONTINUED), GUEST AND PATIENT BACKS
COM COM COM Height of Width Seat & Fabric Fabric
Overall Overall Overall Seat Arms Between Seat Shipping Back Seat Back Width Depth Height Height from Floor Arms Depth Weight Cube Yardage Yardage Yardage PCFG21X2B 48.3 26.3 34.5 19 25.0 21.5 19.5 77 28 3.0 1.5 2.1 PCFP21X2B 48.3 26.3 45.0 19 25.0 21.5 19.5 87 38 3.8 1.5 3.0PCFG21X3B 71.5 26.3 34.5 19 25.0 21.5 19.5 111 40 4.6 2.4 3.5 PCFP21X3B 71.5 26.3 45.0 19 25.0 21.5 19.5 126 56 5.8 2.4 5.0 PCFG24X2B 54.3 26.3 34.5 19 25.0 24.5 19.5 84 30 3.0 1.5 2.1PCFP24X2B 54.3 26.3 45.0 19 25.0 24.5 19.5 94 43 3.8 1.5 3.0 PCFG24X3B 80.5 26.3 34.5 19 25.0 24.5 19.5 123 45 4.6 2.4 3.5PCFP24X3B 80.5 26.3 45.0 19 25.0 24.5 19.5 138 63 5.8 2.4 5.0
UNIT WITH CENTER ARM
ORDERING NOTES: A drawing showing the configuration of the multiple seating and tables is required with each purchase order. Combination upholstery (more than one upholstery cover within the same unit) is an option on all Faeron upholstered products. When combination upholsteryis with upholstery of the same grade or COM, an upcharge for dual fabrics is $25 list per unit and $49 list per unit for three fabrics. When graded in combinationupholstery is selected, use the highest grade upholstery selected or contact Customer Service for a quote -please provide the fabrics specified and a descriptionof where each fabric is to be applied on the product in order to obtain a quote.
WEIGHT CAPACITIESFaeron weight capacities are as follows:2-Seat Freespan - 525 lbs per unit3-Seat Freespan - 750 lbs per unit
Patient backs are available on multiple units, please change the model number FAE2-PCG to FAE2-PCP, and add the following upchargesper back:
Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 921” Chairs $48 57 68 87 105 125 144 164 20224” Chairs $52 62 72 91 111 130 149 168 207
Faeron Option Upcharges $ List $ List $ List
CAL 133 & Moisture Barrier (per yard) 49 Solid Surface Arm Cap (each) - A White 139 Solid Surface Arm Cap (pair) - A White 278Ganging Bracket 44 Solid Surface Arm Cap (each) - Gr A Color 143 Solid Surface Arm Cap (pair) - Gr A Color 286Kinetic Back (not available for Plus) 92 Solid Surface Arm Cap (each) - Gr B 151 Solid Surface Arm Cap (pair) - Gr B 30221” & 24” Under-seat Splashguard 44 Solid Surface Arm Cap (each) - Gr C 157 Solid Surface Arm Cap (pair) - Gr C 313Removeable Seat Covers 68 Solid Surface Arm (each) - A White 219 Solid Surface Arm (pair) - A White 437Removable Back Covers 44 Solid Surface Arm (each) - Gr A Color 228 Solid Surface Arm (pair) - Gr A Color 456Urethane Arm Cap (each) 53 Solid Surface Arm (each) - Gr B 246 Solid Surface Arm (pair) - Gr B 492
Solid Surface Arm (each) - Gr C 259 Solid Surface Arm (pair) - Gr C 517
August 2019
HEALTHCARE | USA | 31
FAERON WOOD | MULTIPLE SEATING - FREESPAN UNITS WITHOUTCENTER ARMS
21” Pre-Configured Freespan Unit - Open Arm 2 Seat, Guest BackFAE2-PCFG21X2AONC Beech Palette
21” Pre-Configured Freespan Unit - Semi Closed Arm 2 Seat, Guest BackFAE2-PCFG21X2ASNC Beech Palette
21” Pre-Configured Freespan Unit - Closed Arm 2 Seat, Guest BackFAE2-PCFG21X2ACNC Beech Palette
21” Pre-Configured Freespan Unit - Open Arm 3 Seat, Guest BackFAE2-PCFG21X3AONC Beech Palette
21” Pre-Configured Freespan Unit - Semi Closed Arm 3 Seat, Guest BackFAE2-PCFG21X3ASNC Beech Palette
21” Pre-Configured Freespan Unit - Closed Arm 3 Seat, Guest BackFAE2-PCFG21X3ACNC Beech Palette
Line Series Chair Type Back Type Size Unit Style Arm Type Arm Style
Faeron Chair Pre-Configured Guest Back Unit with no Open Arm No Cap Freespan Center Arm Multiple Unit
Patient Back Unit with Semi Closed Urethane Cap Center Arm Arm
Closed Arm Solid Surface Cap
Solid Surface Arm
FAE 2 A
B
PCF O
S
NC
UC
21X2
21X3
24X2
24X3
PRODUCT CODE KEY
G
P
C SC
SA
1397 1466 1537 1675 1814 1953 2092 2232 2510
1708 1795 1882 2055 2230 2403 2577 2750 3099
1717 1804 1892 2065 2239 2412 2587 2760 3108
1901 2005 2109 2318 2527 2735 2944 3152 3569
2212 2334 2455 2698 2942 3185 3429 3671 4158
2221 2343 2465 2707 2951 3195 3438 3681 4168
ORDERING NOTES: Faeron chairs can be specified with Urethane Arm Caps (UC), Solid Surface Arm Caps (SC) or Solid Surface Arm (SA),replace “NC” in the model number with the Arm Style selection below and add the upcharge listed on page 30.
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL Species 1 2 3 4 5 6 7 8 9
August 2019
32 | USA | HEALTHCARE
FAERON WOOD | MULTIPLE SEATING - FREESPAN UNITS WITHOUTCENTER ARMS
24” Pre-Configured Freespan Unit - Open Arm 2 Seat, Guest BackFAE2-PCFG24X2AONC Beech Palette
24” Pre-Configured Freespan Unit - Semi Closed Arm 2 Seat, Guest BackFAE2-PCFG24X2ASNC Beech Palette
24” Pre-Configured Freespan Unit - Closed Arm 2 Seat, Guest BackFAE2-PCFG24X2ACNC Beech Palette
24” Pre-Configured Freespan Unit - Open Arm 3 Seat, Guest BackFAE2-PCFG24X3AONC Beech Palette
24” Pre-Configured Freespan Unit - Semi Closed Arm 3 Seat, Guest BackFAE2-PCFG24X3ASNC Beech Palette
24” Pre-Configured Freespan Unit - Closed Arm 3 Seat, Guest BackFAE2-PCFG24X3ACNC Beech Palette
Line Series Chair Type Back Type Size Unit Style Arm Type Arm Style
Faeron Chair Pre-Configured Guest Back Unit with no Open Arm No Cap Freespan Center Arm Multiple Unit
Patient Back Unit with Semi Closed Urethane Cap Center Arm Arm
Closed Arm Solid Surface Cap
Solid Surface Arm
FAE 2 A
B
PCF O
S
NC
UC
21X2
21X3
24X2
24X3
PRODUCT CODE KEY
G
P
C SC
SA
1517 1586 1655 1795 1934 2073 2212 2350 2629
1827 1915 2002 2175 2349 2523 2697 2870 3218
1837 1924 2011 2184 2359 2532 2706 2880 3227
2070 2175 2279 2488 2696 2905 3113 3322 3738
2382 2503 2624 2868 3112 3354 3598 3841 4328
2391 2512 2634 2877 3121 3364 3607 3851 4337
ORDERING NOTES: Faeron chairs can be specified with Urethane Arm Caps (UC), Solid Surface Arm Caps (SC) or Solid Surface Arm (SA),replace “NC” in the model number with the Arm Style selection below and add the upcharge listed on page 30.
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL Species 1 2 3 4 5 6 7 8 9
August 2019
HEALTHCARE | USA | 33
FAERON WOOD | MULTIPLE SEATING - FREESPAN UNITS WITHCENTER ARMS
21” Pre-Configured Freespan Unit - Open Arm 2 Seat, Guest BackFAE2-PCFG21X2BONC Beech Palette
21” Pre-Configured Freespan Unit - Semi Closed Arm 2 Seat, Guest BackFAE2-PCFG21X2BSNC Beech Palette
21” Pre-Configured Freespan Unit - Closed Arm 2 Seat, Guest BackFAE2-PCFG21X2BCNC Beech Palette
21” Pre-Configured Freespan Unit - Open Arm 3 Seat, Guest BackFAE2-PCFG21X3BONC Beech Palette
21” Pre-Configured Freespan Unit - Semi Closed Arm 3 Seat, Guest BackFAE2-PCFG21X3BSNC Beech Palette
21” Pre-Configured Freespan Unit - Closed Arm 3 Seat, Guest BackFAE2-PCFG21X3BCNC Beech Palette
Line Series Chair Type Back Type Size Unit Style Arm Type Arm Style
Faeron Chair Pre-Configured Guest Back Unit with no Open Arm No Cap Freespan Center Arm Multiple Unit
Patient Back Unit with Semi Closed Urethane Cap Center Arm Arm
Closed Arm Solid Surface Cap
Solid Surface Arm
FAE 2 A
B
PCF O
S
NC
UC
21X2
21X3
24X2
24X3
PRODUCT CODE KEY
G
P
C SC
SA
1801 1871 1940 2079 2218 2357 2496 2635 2913
2288 2384 2480 2671 2862 3053 3244 3435 3817
2307 2403 2498 2690 2881 3072 3263 3454 3836
2554 2659 2763 2971 3180 3389 3597 3806 4223
3218 3356 3495 3773 4051 4330 4608 4886 5442
3246 3385 3523 3801 4080 4358 4636 4914 5470
ORDERING NOTES: Faeron chairs can be specified with Urethane Arm Caps (UC), Solid Surface Arm Caps (SC) or Solid Surface Arm (SA),replace “NC” in the model number with the Arm Style selection below and add the upcharge listed on page 30.
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL Species 1 2 3 4 5 6 7 8 9
August 2019
34 | USA | HEALTHCARE
FAERON WOOD | MULTIPLE SEATING - FREESPAN UNITS WITHCENTER ARMS
24” Pre-Configured Freespan Unit - Open Arm 2 Seat, Guest BackFAE2-PCFG24X2BONC Beech Palette
24” Pre-Configured Freespan Unit - Semi Closed Arm 2 Seat, Guest BackFAE2-PCFG24X2BSNC Beech Palette
24” Pre-Configured Freespan Unit - Closed Arm 2 Seat, Guest BackFAE2-PCFG24X2BCNC Beech Palette
24” Pre-Configured Freespan Unit - Open Arm 3 Seat, Guest BackFAE2-PCFG24X3BONC Beech Palette
24” Pre-Configured Freespan Unit - Semi Closed Arm 3 Seat, Guest BackFAE2-PCFG24X3BSNC Beech Palette
24” Pre-Configured Freespan Unit - Closed Arm 3 Seat, Guest BackFAE2-PCFG24X3BCNC Beech Palette
Line Series Chair Type Back Type Size Unit Style Arm Type Arm Style
Faeron Chair Pre-Configured Guest Back Unit with no Open Arm No Cap Freespan Center Arm Multiple Unit
Patient Back Unit with Semi Closed Urethane Cap Center Arm Arm
Closed Arm Solid Surface Cap
Solid Surface Arm
FAE 2 A
B
PCF O
S
NC
UC
21X2
21X3
24X2
24X3
PRODUCT CODE KEY
G
P
C SC
SA
1920 1990 2060 2198 2338 2476 2616 2755 3033
2407 2503 2598 2789 2980 3173 3364 3555 3937
2426 2522 2617 2808 2999 3191 3383 3574 3956
2724 2828 2932 3141 3350 3558 3767 3976 4393
3387 3526 3665 3943 4221 4500 4777 5055 5612
3415 3555 3693 3972 4250 4528 4805 5084 5640
ORDERING NOTES: Faeron chairs can be specified with Urethane Arm Caps (UC), Solid Surface Arm Caps (SC) or Solid Surface Arm (SA),replace “NC” in the model number with the Arm Style selection below and add the upcharge listed on page 30.
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL Species 1 2 3 4 5 6 7 8 9
August 2019
HEALTHCARE | USA | 35
CONTRIBUTES TO
CREDIT 2.1 - 2.2 Construction Waste Management 1-2 point(s)
CREDIT 3.3 Resource Reuse 1 point
CREDIT 4.1 Recycled Content 1 point
CREDIT 4.5 Low Emitting Materials,
Systems & Seating 1 point
CREDIT 5.1 Regional Materials* 1 point
CREDIT 7 Certified Wood 1 point(s)(MUST BE REQUESTED)
*This credit is only applicable if in total 20% of the combined value of the procurement of construction materials and in the furniture are manufactured within a radius of 500 miles. This credit will apply if the installation of the finished product occurs within 500 miles of Kitchener, Ontario.
FAERON WOOD | LEED CI CREDIT SUMMARY
Faeron Wood Easy Access
PRE-CONSUMERRECYCLED CONTENT = 5.39%
POST-CONSUMERRECYCLED CONTENT =11.76%
Up to 27.45% of this Faeron product is recyclable at the end of its useful life.
level® CERTIFICATION, AIR EMISSIONS AND FSC® CERTIFICATION
MATERIAL CONTENT:
level® CERTIFICATIONBIFMA’s e3 Furniture Sustainability Standard is a voluntary, multi-attribute standard that measures the degreeof sustainability of furniture. This standard evaluates product and company environmental attributes andcompliance systems in a wide range of elements which include Materials, Energy & Atmosphere, Human &Ecosystem Health and Social Responsibility. Faeron products have earned level®, BIFMA‘s sustainabilitycertification program for furniture, certification through third-party verification against the e3 standard.
AIR-EMISSIONSAll Faeron products are supplied with air-emissions certified materials. Contact customer service forinformation.
FSC®
In 2005, Krug received Forest Stewardship Council® (FSC®) Chain-of-Custody certification for our manufacturingfacilities. The FSC® Chain-of-Custody tracks certified wood from seedling to final sale. It signifies that thegrowth, harvesting and production of goods are entirely achieved through responsible forestry, which guaranteesa healthy supply of forest resources for generations to come.
Architects, designers, and building professionals can specify FSC®-certified products in order to achieve apoint from the US. Green Building Council's Leadership in Energy and Environmental Design (LEED) RatingSystem.
14.71% Plywood
19.61% Steel
2% Steel Seat Springs
5.88% Fabric
33.33% Hardwood
16.67% Urethane Foam
7.84% Cardboard
August 2019
36 | USA | HEALTHCARE
ORDERING NOTES: Combination upholstery (more than one upholstery cover within the same unit) is an option on all Faeron upholstered products. When combination upholsteryis with upholstery of the same grade or COM, an upcharge for dual fabrics is $25 list per unit and $49 list per unit for three fabrics. When graded incombination upholstery is selected, use the highest grade upholstery selected or contact Customer Service for a quote -please provide the fabrics specifiedand a description of where each fabric is to be applied on the product in order to obtain a quote.
WEIGHT CAPACITIESFaeron weight capacities are as follows:Easy Access Chairs (21” & 24”) - 500 lbs
FEATURES:For a complete list of features see page 12.
DIMENSIONS
Height of WidthOverall Overall Overall Seat Arms from Footrest Between Seat ShippingWidth Depth Height Height Floor Height Arms Depth Weight Cubes
21” Guest 25.0 29.75 40.0 25 30.5 6.75 21 19.5 51 2124” Guest 28.0 29.75 40.0 25 30.5 6.75 24 19.5 55 26
21” Patient 25.0 29.75 50.5 25 30.5 6.75 21 19.5 56 2624” Patient 28.0 29.75 50.5 25 30.5 6.75 24 19.5 61 30
COM YARDAGES - Easy Access Chair
COM Yardage COM Yardage COM YardageSeat Only Back Only Seat & Back
21” & 24” Guest - One Chair 0.9 1.4 1.6
21” & 24” Patient - One Chair 0.9 2.0 2.0
FAERON WOOD | EASY ACCESS CHAIR
Patient backs are available on Easy Access units, please change the model number FAE-HG to FAE2-HP, and add the following upchargesper back:
Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 921” Chairs $48 57 68 87 105 125 144 164 20224” Chairs $52 62 72 91 111 130 149 168 207
Faeron Guest Option Upcharges $ List $ List
CAL 133 & Moisture Barrier (per yard) 49 Solid Surface Arm Cap (per pair) - A White 278Ganging Bracket 44 Solid Surface Arm Cap (per pair) - Gr A Color 286Kinetic Back (not available for Plus) 92 Solid Surface Arm Cap (per pair) - Gr B 30221” & 24” Under-seat Splashguard 44 Solid Surface Arm Cap (per pair) - Gr C 313Removeable Seat Covers 68 Solid Surface Arm (per pair) - A White 437Removable Back Covers 44 Solid Surface Arm (per pair) - Gr A Color 456Urethane Arm Cap (per pair) 105 Solid Surface Arm (per pair) - Gr B 492
Solid Surface Arm (per pair) - Gr C 517
August 2019
HEALTHCARE | USA | 37
FAERON WOOD | EASY ACCESS CHAIR
21” Guest, Open ArmFAE2-HG21ONC Beech
Palette
21” Guest, Semi Closed ArmFAE2-HG21SNC Beech
Palette
21” Guest, Closed ArmFAE2-HG21CNC Beech
Palette
24” Guest, Open ArmFAE2-HG24ONC Beech
Palette
24” Guest, Semi Closed ArmFAE2-HG24SNC Beech
Palette
24” Guest, Closed ArmFAE2-HG24CNC Beech
Palette
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL Species 1 2 3 4 5 6 7 8 9
PRODUCT CODE KEY
Line Series Chair Type Size Arm Type Arm Cap
Faeron Chair Easy Access Guest Chair Open Arm No Cap
Easy Access Patient Chair Semi Closed Arm Urethane Cap
Closed Arm Solid Surface Cap
Solid Surface Arm
FAE 2 OHG 21
SHP 24
DESCRIPTION/MODEL Price
Metal Footrest CapFAE2-RHFRC 61
C
NC
UC
SC
SA
1161 1195 1230 1299 1369 1439 1508 1578 1716
1472 1524 1575 1680 1784 1888 1993 2097 2305
1481 1533 1585 1690 1794 1898 2003 2107 2315
1220 1254 1289 1358 1427 1498 1567 1636 1775
1530 1583 1634 1739 1843 1947 2052 2156 2364
1540 1592 1644 1749 1853 1957 2062 2166 2373
ORDERING NOTES: Faeron chairs can be specified with Urethane Arm Caps (UC), Solid Surface Arm Caps (SC) or Solid Surface Arm (SA),replace “NC” in the model number with the Arm Style selection below and add the upcharge listed on page 36.
August 2019
38 | USA | HEALTHCARE
CONTRIBUTES TO
CREDIT 2.1 - 2.2 Construction Waste Management 1-2 point(s)
CREDIT 3.3 Resource Reuse 1 point
CREDIT 4.1 Recycled Content 1 point
CREDIT 4.2 Recycled Content 1 point
CREDIT 4.5 Low Emitting Materials,
Systems & Seating 1 point
CREDIT 5.1 Regional Materials* 1 point
CREDIT 7 Certified Wood 1 point(s)(MUST BE REQUESTED)
*This credit is only applicable if in total 20% of the combined value of the procurement of construction materials and in the furniture are manufactured within a radius of 500 miles. This credit will apply if the installation of the finished product occurs within 500 miles of Kitchener, Ontario.
FAERON WOOD | LEED CI CREDIT SUMMARY
Faeron Wood Tables
PRE-CONSUMERRECYCLED CONTENT = 54.89%
POST-CONSUMERRECYCLED CONTENT = 10.33%
Up to 10.87% of this Faeron prod-uct is recyclable at the end of itsuseful life.
2.17% Hardwood Veneer
10.87% Cardboard
34.78% Hardwood
52.17% Particle Board
level® CERTIFICATION, AIR EMISSIONS AND FSC® CERTIFICATION
MATERIAL CONTENT:
level® CERTIFICATIONBIFMA’s e3 Furniture Sustainability Standard is a voluntary, multi-attribute standard that measures the degreeof sustainability of furniture. This standard evaluates product and company environmental attributes andcompliance systems in a wide range of elements which include Materials, Energy & Atmosphere, Human &Ecosystem Health and Social Responsibility. Faeron products have earned level®, BIFMA‘s sustainabilitycertification program for furniture, certification through third-party verification against the e3 standard.
AIR-EMISSIONSAll Faeron products are supplied air-emissions certified. Contact customer service for information.
FSC®
In 2005, Krug received Forest Stewardship Council® (FSC®) Chain-of-Custody certification for our manufacturingfacilities. The FSC® Chain-of-Custody tracks certified wood from seedling to final sale. It signifies that thegrowth, harvesting and production of goods are entirely achieved through responsible forestry, which guaranteesa healthy supply of forest resources for generations to come. Karma and other Krug products can be specifiedwith one of two types of FSC® Certification: (a) FSC®-certified (which includes FSC®-certified lumber, veneer and substrate material)(b) FSC®-mix certified (which includes substrate material only, and is a lower cost option certification)Contact customer service for further information, pricing and leadtimes.
Architects, designers, and building professionals can specify FSC®-certified products in order to achieve apoint from the US. Green Building Council's Leadership in Energy and Environmental Design (LEED) RatingSystem.
August 2019
HEALTHCARE | USA | 39
Linked Table - End Linked Table - Corner/Flat 45
Linked Table - Corner/Flat 90
Linked Table - Corner Square Flat
FAE4-LKE-22-22 FAE4-LCRF45 FAE4-LKCRF90 FAE4-LKCSF90FAE4-LKI-22-22
Linked Table -Center
FAERON WOOD | LINKING TABLES FEATURES
ORDERING NOTES: Linking tables can be ordered in conjunction with any of the Krug Multiple Seating. Linking tables are connected to the Multiple Seating via U-Shaped brackets.
The design of the tables for Faeron Multiple Seating allows for any table to be very easily added or moved to a new position within the configuration - orcompletely replaced - after the product has been first installed. The attachment of the tables is designed so that they can be readily be taken out of theconfiguration without any defacing of the adjoining seat frames.
Linking Tables also feature a universal, non-handed design:They can be moved to reverse position in almost any configuration, providing a high level of flexibility for reconfiguring.
Please note Faeron Laminate Linking Tables are not available on KrugExpress. Wood Tops with Wood Edges are available on KrugExpress but with a minimum order requirement of 5 tables per order.
A drawing showing the configuration of the multiple seating and tables is required with each purchase order.
WOOD SPECIES Solid Beech frames, and edges.Veneer tops.
STANDARD FINISHESFor a complete list of standard wood finishes,please see page 4. Faeron tables are availablein 22 standard finishes.
LAMINATE AND POLYMER EDGE Faeron tables are available in laminates withwith Polymer edge.See page 4 for laminate information.
August 2019
40 | USA | HEALTHCARE
Center Square Table FAE4-LKI-22-22
End Square Table FAE4-LKE-22-22
Linking Curved Corner Table 45o
FAE4-LKCRF45
Linking Curved Corner Table 90o
FAE4-LKCRF90
Linking Square Corner Table 90o
FAE4-LKCSF90
FAERON WOOD | LINKING TABLESSolid Surface Solid Surface Solid Surface Solid Surface
Laminate with top Grade top Grade top top DESCRIPTION/MODEL Beech Polymer Edge A - White A - Color Grade B Grade C
515 358 613 647 714 761
657 472 756 792 864 914
572 376 755 794 872 925
709 498 892 945 1051 1123
775 541 982 1036 1144 1218
22 22 - 23 1.5
22 22 16 34 1.5
28 24 16 27 2.2
38 24 16 32 2.2
30 30 16 42 2.2
DIMENSIONSModel Width Depth Height Shipping Weight Cubes
Center Square Table FAE4-LKI-22-22
End Square Table FAE4-LKE-22-22
Linking Curved Corner Table 45o
FAE4-LKCRF45
Linking Curved Corner Table 90o
FAE4-LKCRF90
Linking Square Corner Table 90o
FAE4-LKCSF90
August 2019
HEALTHCARE | USA | 41
WOOD SPECIESSolid Beech frames, and edges.Veneer tops.
STANDARD FINISHESFor a complete list of standard wood finishes,please see page 4. Faeron tables areavailable in 22 standard finishes.
LAMINATE AND POLYMER EDGEFaeron tables are available in laminates withwood or laminates with Polymer edge.See page 4 for laminate information.
FAERON WOOD | FREE STANDING TABLES
Round Tables FAE4-22D-21 FAE4-30D-16FAE4-44D-16
Elliptical FAE4-E44-22-16
Square TablesFAE4-22-22-21FAE4-30-30-16FAE4-44-44-16
Rectangular Table FAE4-44-22-16
Solid Surface Solid Surface Solid Surface Solid SurfaceLaminate with top Grade top Grade top top
DESCRIPTION/MODEL Beech Polymer Edge A - White A - Color Grade B Grade C
DIMENSIONS
950 706 1396 1494 1578 17301068 791 1623 1736 1888 21101961 1432 2866 3066 3344 3744
1221 891 1797 1923 2095 2344
940 698 1332 1425 1515 16691088 807 1636 1751 1934 21842001 1461 2924 3129 3412 3821
1236 902 1805 1932 2107 2359
Model Width Depth Height Shipping Weight Cubes
Round Tables FAE4-22D-21 FAE4-30D-16FAE4-44D-16
Elliptical FAE4-E44-22-16
Square TablesFAE4-22-22-21FAE4-30-30-16FAE4-44-44-16
Rectangular Table FAE4-44-22-16
22” Diameter 21 22 830” Diameter 16 35 1140” Diameter 16 45 14
44 22 16 65 21
22 22 21 34 8
30 30 16 42 11
44 44 16 47 12
44 22 16 55 12
August 2019
42 | USA | HEALTHCARE
FAERON METAL | LEED CI CREDIT SUMMARY
Faeron Metal Guest
41% Steel
18% Urethane Foam
16% Plywood
7% Fabric
7% Plastic
9% Cardboard
2% Steel Seat Springs
level® CERTIFICATION, AIR-EMISSIONS AND FSC® CERTIFICATION
level® CERTIFICATIONBIFMA’s e3 Furniture Sustainability Standard is a voluntary, multi-attribute standard that measures the degreeof sustainability of furniture. This standard evaluates product and company environmental attributes andcompliance systems in a wide range of elements which include Materials, Energy & Atmosphere, Human &Ecosystem Health and Social Responsibility. Cressida products have earned level®, BIFMA‘s sustainabilitycertification program for furniture, certification through third-party verification against the e3 standard.
AIR-EMISSIONSAll Faeron Metal products are supplied air-emissions certified. Contact customer service for information.
FSC®
In 2005, Krug received Forest Stewardship Council® (FSC®) Chain-of-Custody certification for our manufacturingfacilities. The FSC® Chain-of-Custody tracks certified wood from seedling to final sale. It signifies that thegrowth, harvesting and production of goods are entirely achieved through responsible forestry, which guaranteesa healthy supply of forest resources for generations to come. Contact customer service for further information, pricing and leadtimes.
Architects, designers, and building professionals can specify FSC®-certified products in order to achieve apoint from the US. Green Building Council's Leadership in Energy and Environmental Design (LEED) RatingSystem.
MATERIAL CONTENT:
PRE-CONSUMERRECYCLED CONTENT =10.87 %
POST-CONSUMERRECYCLED CONTENT = 17.48%
Up to 50% of this Faeron Metalproduct is recyclable at the end of itsuseful life.
CONTRIBUTES TO
CREDIT 2.1 - 2.2 Construction Waste Management 1-2 point(s)
CREDIT 3.3 Resource Reuse 1 point
CREDIT 4.1 Recycled Content 1 point
CREDIT 4.2 Recycled Content 1 point
CREDIT 4.5 Low Emitting Materials,
Systems & Seating 1 point
CREDIT 5.1 Regional Materials* 1 point
CREDIT 7 Certified Wood 1 point(s)(MUST BE REQUESTED)
*This credit is only applicable if in total 20% of the combined value of the procurement of construction materials and in the furniture are manufactured within a radius of 500 miles. This credit will apply if the installation of the finished product occurs within 500 miles of Kitchener, Ontario.
August 2019
HEALTHCARE | USA | 43
FAERON METAL | GUEST, PATIENT, MULTIPLE & EASY ACCESS FEATURES
CLEAN OUTAll Faeron Metal seating models have a built-in clean out feature: a space at the back of theseat that allows dirt, debris and liquid to fall tothe floor for easy clean up and maintenance - designed so that it does not detract from thecomfort or appearance of the product.
FLEX BACKThe ergonomically designed back has beendesigned with a slight flexing action, toenhance the level of long-term sitting comfort,and provide greater ease of egress.
WALL SAVERThe angle of the back and the rear legs aredesigned to keep the back away from thewall, to prevent wear and damage to both thechairs and to the walls of the facility.
STEEL SEAT FRAMESteel seat frames are joined to othercomponents with hardened steel bolts andinserts, ensuring exceptional durability andstrength. The seats features a spring systemthat substantially enhances comfort andextends product life cycle. Seats are removable,and field replaceable.
SEAT COMFORTSeats feature a spring suspension forexceptional comfort while high grade foamprovides superior support and longevity.
POLYMER ARMFaeron arms are durable, comfortable, and longlasting. They are made with injected polymer thatis a solid color throughout the arm and areavailable in three color options: Black, Grey andTaupe.
FINISH DURABILITYThe Krug’s finish, a proprietary catalyzed varnish formulation,has been repeatedly shown, through independent laboratorytesting, to be the industry leader in durability and abrasionresistance. The Krug finish looks better longer and is especiallysuited to the demands of healthcare environments.
LATEX FREEKrug products are made with latex-free materials to prevent theallergic reaction that latex causes in some people.
REPLACEABLE COMPONENTSFaeron Metal chairs are uniquely designed to allow virtually allmajor components to be field replaced, providing a very costeffective means to significantly extend the life of the product.Seats, backs, frames are field replaceable. Pricing and model numbers can be viewed online at www.krug.ca.
CUSTOM CAPABILITIESModifications in dimension, seat and back shape or thickness, and other modifications are possible with Krug's capability to customize for specific requirements and needs. We can also provide custom finishes.
WEIGHT CAPACITIESFaeron Metal weight capacities are as follows:Guest & Patient Chairs (21” & 24”) - 500 lbsPlus Chairs (30” & 44”) - 750 lbsEasy Access Chairs - 500 lbsMultiple Seating & Pre-configured - 500 lbs per seat2-Seat Freespan - 625 lbs per unit3-Seat Freespan - 750 lbs per unit
August 2019
44 | USA | HEALTHCARE
FAERON METAL | GUEST, PATIENT, MULTIPLE & EASY ACCESS OPTIONS
ARM PANELUpholstered arm panels are available in both semi- andfully-closed styles, and are field replaceable if damaged.
SOLID SURFACE ARM The optional Solid Surface Arm provides a fully seamlessarmrest for enhanced durability, protection andcleanability. It is available in 8 standard Corian colors,and custom colors (at an upcharge). Arms are replaceableas a full side frame if they become damaged ordegraded.
WOOD ARMWood arms are solid Beech and available in standardand custom finishes. Krug’s wood finish is a proprietaryhigh-durability formulation that has been shown to be anindustry leader in abrasion resistance. Arms can bereplaced if they do become damaged or degraded.
COMBINATION UPHOLSTERY OPTIONSFaeron Metal can be upholstered in combinations of twoor more upholstery covers on the same units: seats,backs and closed arm panels can be individuallyupholstered with a specific cover. When combinationupholstery is with upholstery of the same grade or COM,an upcharge for dual fabrics is $25 list per unit and $49 list per unit for three fabrics will be applied. Whengraded-in combination upholstery is selected, use thehighest upholstery selected or contact Customer Servicefor a quote (please provide the fabrics specified and adescription of where each fabric is to be applied on theproduct in order to obtain a quote)
KINETIC BACK OPTIONThe optional Kinetic Back provides the chair back with avery pleasant and comfortable rocking motion, which cansignificantly enhance long-term sitting for patients andguests alike. The durable spring-loaded mechanismprovides a range of motion of 20 degrees, and can befield-installed or replaced. It's available on any FaeronGuest or Patient chair back with the exception of thePlus stlyles (30" and 44").
CLEANABLE UNDER-SEAT SPLASHGUARDAll Faeron Metal seating models are available with aplastic moisture barrier that covers and encloses theunderside of the seat (while still allowing air transfer and ven-tilation in and out of the seat cushion). The Splashguard sig-nificantly enhances the anti-microbial and germresistance properties of the product, by enclosing the partof the chair that can be most susceptible to infection-causingpathogens. The Splashguard is a smooth, easy to cleansurface, either while on the chair or when removed, and isalso field replaceable.
REMOVABLE COVERS Faeron Metal chairs (all sizes) are available with remove-able seat and back covers. Replacement seat and backcovers can be quickly installed on Faeron products thatwere originally ordered with the Removeable coveroption. Replacement seat and back covers can also beinstalled on Faeron products that were not originallyordered with the removeable cover option, with somesimple staple removal on the original seats and backs.
MOISTURE BARRIER & CAL 133California Technical Bulletin 133 is a flammability test forseating. Krug offers a compliance method, in combinationwith non-flammable upholstery covers, may enable products to meet certification requirements for this test.This process at the same time also provides the productswith a Moisture Barrier - a treatment that helps to preventthe passage of liquids and moisture to inside of the upholstered components - thereby conferring sanitaryand anti-infection benefits. So when CAL 133 is specified,the product also automatically has a Moisture Barrier,and when a Moisture Barrier is specified, the product alsofeatures the compliance method and low flammability fea-tures of CAL 133.
The application of this up-charge and the compliancemethod does not mean that the specific configuration ofproduct and upholstery cover are tested and officiallycertified as being CAL133 compliant. If the official certification is required, Krug will provide this (through anindependent certified testing laboratory) at a charge of$735 per item, plus the cost of the product to be tested.Lead time for certification testing is typically 4-8 weeks. Krug assumes no responsibility for the testing of ourproducts in combination with upholstery covers, or forthe results of any testing conducted. Some specificconfigurations of products and upholstery have alreadybeen tested. Please contact Customer Service foradditional information. CAL 133 and Moisture Barrier isavailable for $49 list per yard.
GANGING All Faeron Metal freestanding Guest/Patient chairs canbe ganged using a ganging bracket. The powder coatedmetal bracket is fastened to the inside face of each sideframe. Ganging Brackets are available for an upchargeof $44 list per chair.
August 2019
HEALTHCARE | USA | 45
FAERON METAL | GUEST
WEIGHT CAPACITIESFaeron Metal weight capacities are as follows:Guest Chairs (21” & 24”) - 500 lbsPlus Guest Chairs (30” & 44”) - 750 lbs
FEATURES:
For a complete list of features see page 12.
DIMENSIONS
ORDERING NOTES:The approval process is as follows:1. A sample of the COM must be provided to Krug Customer Service prior to or at the time of order. 2. The sample will be reviewed and the customer advised if the fabric is unsuitable.3. The COM fabric or leather will be inspected when received at the factory, to identify any further concerns with its suitability.Note: Some vinyls, leathers & upholsteries are not suitable for application on Faeron Metal seating.
Height of WidthOverall Overall Overall Seat Arms from Between Seat ShippingWidth Depth Height Height Floor Arms Depth Weight Cube
21” Seat 25.0 26.3 34.5 19.0 25.0 21 19.5 56 14
24” Seat 28.0 26.3 34.5 19.0 25.0 24 19.5 60 19
30” Seat 34.0 26.3 34.5 19.0 25.0 30 19.5 66 20
44” Seat 48.0 26.3 34.5 19.0 25.0 44 19.5 83 28
COM- YARDAGE REQUIREMENTSCOM Yardage COM Yardage COM Yardage COM YardageSeat & Back Seats Only Back Only Closed Arm Panel
21” & 24” - One Chair 1.6 0.9 1.4 0.96
30” - One Chair 2.3 0.9 1.4 0.96
44” - One Chair 2.9 1.5 1.6 0.96
A drawing showing the configuration of the multiple seating and tables is required with each purchase order. Combination upholstery (more than one upholstery cover within the same unit) is an option on all Faeron Metal upholstered products. When combinationupholstery is with upholstery of the same grade or COM, an upcharge for dual fabrics is $25 list per unit and $49 list per unit for three fabrics. When graded incombination upholstery is selected, use the highest grade upholstery selected or contact Customer Service for a quote -please provide the fabrics specifiedand a description of where each fabric is to be applied on the product in order to obtain a quote.
Faeron Option Upcharges $ List $ List
CAL 133 & Moisture Barrier (per yard) 49 Solid Surface Arm (per pair) - A White 437Ganging Bracket 44 Solid Surface Arm (per pair) - Gr A Color 456Kinetic Back (not available for Plus) 92 Solid Surface Arm (per pair) - Gr B 49221” & 24” Under-seat Splashguard 44 Solid Surface Arm (per pair) - Gr C 517Removeable Seat Covers 68 Beech/Palette Wood Arm (per pair) 164Removable Back Covers 44
August 2019
46 | USA | HEALTHCARE
FAERON METAL | GUEST
PRODUCT CODE KEY
Line Series Chair Type Size Arm Type Arm Style Metal Finish
Faeron Chair Guest Seating Open Arm Polymer Arm Silver Metallic
Semi Closed Arm Wood Arm Brushed Nickel
Closed Arm Solid Surface Arm
FAE 21
24
O
S
21” Open Polymer Arm, Silver Metallic Frame FAE2M-G21OPAS
21” Open Polymer Arm, Brushed Nickel Frame FAE2M-G21OPAN
21” Semi Closed Polymer Arm, Silver Metallic Frame FAE2M-G21SPAS
21” Semi Closed Polymer Arm, Brushed Nickel Frame FAE2M-G21SPAN 21” Closed Polymer Arm, Silver Metallic Frame FAE2M-G21CPAS
21” Closed Polymer Arm, Brushed Nickel Frame FAE2M-G21CPAN 24” Open Polymer Arm, Silver Metallic Frame FAE2M-G24OPAS
24” Open Polymer Arm, Brushed Nickel Frame FAE2M-G24OPAN
24” Semi Closed Polymer Arm, Silver Metallic Frame FAE2M-G24SPAS
24” Semi Closed Polymer Arm, Brushed Nickel Frame FAE2M-G24SPAN 24” Closed Polymer Arm, Silver Metallic Frame FAE2M-G24CPAS
24” Closed Polymer Arm, Brushed Nickel Frame FAE2M-G24CPAN
30
44
C
G2M PA
WA
SA
772 806 838 905 970 1037 1103 1169 1301
920 953 986 1052 1118 1184 1251 1317 1449
1068 1118 1167 1267 1366 1465 1565 1664 1863
1216 1265 1315 1415 1514 1613 1713 1812 2011
1077 1127 1176 1276 1375 1474 1574 1673 1872
1225 1274 1324 1424 1523 1622 1722 1821 2020
832 865 898 964 1031 1096 1163 1229 1361
979 1013 1046 1112 1178 1244 1310 1376 1508
1128 1177 1227 1327 1426 1525 1625 1724 1922
1275 1325 1374 1474 1573 1672 1772 1871 2070
1137 1186 1236 1336 1435 1534 1634 1733 1931
1284 1334 1383 1483 1582 1681 1781 1880 2079
S
N
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL 1 2 3 4 5 6 7 8 9
ORDERING NOTES: Faeron Metal chairs can also be specified with a Wood Arm (WA) or aSolid Surface Arm (SA), replace “PA” in the model number with theArm Style selection below and add the upcharge listed.
Arm Style Option Upcharges $ List
Solid Surface Arm (per pair) - A White 437Solid Surface Arm (per pair) - Gr A Color 456Solid Surface Arm (per pair) - Gr B 492Solid Surface Arm (per pair) - Gr C 517Beech/Palette Wood Arm (per pair) 164
August 2019
HEALTHCARE | USA | 47
FAERON METAL | GUEST
30” Open Polymer Arm, Silver Metallic Frame FAE2M-G30OPAS
30” Open Polymer Arm, Brushed Nickel Frame FAE2M-G30OPAN
30” Semi Closed Polymer Arm, Silver Metallic Frame FAE2M-G30SPAS
30” Semi Closed Polymer Arm, Brushed Nickel Frame FAE2M-G30SPAN 30” Closed Polymer Arm, Silver Metallic Frame FAE2M-G30CPAS
30” Closed Polymer Arm, Brushed Nickel Frame FAE2M-G30CPAN 44” Open Polymer Arm, Silver Metallic Frame FAE2M-G44OPAS
44” Open Polymer Arm, Brushed Nickel Frame FAE2M-G44OPAN
44” Semi Closed Polymer Arm, Silver Metallic Frame FAE2M-G44SPAS
44” Semi Closed Polymer Arm, Brushed Nickel FrameFAE2M-G44SPAN 44” Closed Polymer Arm, Silver Metallic Frame FAE2M-G44CPAS
44” Closed Polymer Arm, Brushed Nickel Frame FAE2M-G44CPAN
956 1003 1050 1146 1241 1337 1431 1526 1717
1103 1150 1198 1293 1389 1484 1579 1674 1865
1252 1316 1380 1508 1636 1765 1893 2021 2278
1400 1463 1527 1656 1784 1913 2040 2169 2426
1261 1325 1389 1517 1645 1774 1902 2030 2287
1409 1472 1536 1665 1793 1922 2049 2178 2435
1185 1245 1305 1425 1545 1665 1785 1905 2145
1333 1392 1453 1572 1693 1813 1932 2053 2292
1481 1558 1634 1787 1940 2093 2246 2399 2706
1629 1706 1782 1935 2088 2241 2394 2547 2854
1490 1567 1643 1796 1949 2102 2255 2408 2715
1638 1715 1791 1944 2097 2250 2403 2556 2863
PRODUCT CODE KEY
Line Series Chair Type Size Arm Type Arm Style Metal Finish
Faeron Chair Guest Seating Open Arm Polymer Arm Silver Metallic
Semi Closed Arm Wood Arm Brushed Nickel
Closed Arm Solid Surface Arm
FAE 21
24
O
S
30
44
C
G2M PA
WA
SA
S
N
ORDERING NOTES: Faeron Metal chairs can also be specified with a Wood Arm (WA) or aSolid Surface Arm (SA), replace “PA” in the model number with theArm Style selection below and add the upcharge listed.
Arm Style Option Upcharges $ List
Solid Surface Arm (per pair) - A White 437Solid Surface Arm (per pair) - Gr A Color 456Solid Surface Arm (per pair) - Gr B 492Solid Surface Arm (per pair) - Gr C 517Beech/Palette Wood Arm (per pair) 164
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL 1 2 3 4 5 6 7 8 9
August 2019
48 | USA | HEALTHCARE
FAERON METAL | LEED CI CREDIT SUMMARY
Faeron Metal Patient
level® CERTIFICATION, AIR-EMISSIONS AND FSC® CERTIFICATION
level® CERTIFICATIONBIFMA’s e3 Furniture Sustainability Standard is a voluntary, multi-attribute standard that measures the degreeof sustainability of furniture. This standard evaluates product and company environmental attributes andcompliance systems in a wide range of elements which include Materials, Energy & Atmosphere, Human &Ecosystem Health and Social Responsibility. Faeron Metal products have earned level®, BIFMA‘s sustainabilitycertification program for furniture, certification through third-party verification against the e3 standard.
AIR-EMISSIONSAll Faeron Metal products are supplied air-emissions certified. Contact customer service for information.
FSC®
In 2005, Krug received Forest Stewardship Council® (FSC®) Chain-of-Custody certification for our manufacturingfacilities. The FSC® Chain-of-Custody tracks certified wood from seedling to final sale. It signifies that thegrowth, harvesting and production of goods are entirely achieved through responsible forestry, which guaranteesa healthy supply of forest resources for generations to come. Contact customer service for further information,pricing and leadtimes.
Architects, designers, and building professionals can specify FSC®-certified products in order to achieve apoint from the US. Green Building Council's Leadership in Energy and Environmental Design (LEED) RatingSystem.
37% Steel
19% Urethane Foam
19% Plywood
7% Fabric
6% Plastic
10% Cardboard
2% Steel Seat Springs
MATERIAL CONTENT:
PRE-CONSUMERRECYCLED CONTENT = 9.80%
POST-CONSUMERRECYCLED CONTENT = 17.63%
Up to 47.06% of this Faeron Metalproduct is recyclable at the end of itsuseful life.
CONTRIBUTES TO
CREDIT 2.1 - 2.2 Construction Waste Management 1-2 point(s)
CREDIT 3.3 Resource Reuse 1 point
CREDIT 4.1 Recycled Content 1 point
CREDIT 4.2 Recycled Content 1 point
CREDIT 4.5 Low Emitting Materials,
Systems & Seating 1 point
CREDIT 5.1 Regional Materials* 1 point
CREDIT 7 Certified Wood 1 point(s)(MUST BE REQUESTED)
*This credit is only applicable if in total 20% of the combined value of the procurement of construction materials and in the furniture are manufactured within a radius of 500 miles. This credit will apply if the installation of the finished product occurs within 500 miles of Kitchener, Ontario.
August 2019
HEALTHCARE | USA | 49
FAERON METAL | PATIENT
DIMENSIONS & COM REQUIREMENTS
Height of Width Overall Overall Overall Seat Arms from Between Seat ShippingWidth Depth Height Height Floor Arms Depth Weight Cubes
21" Seat 25.0 26.3 45.0 19.0 25 21 19.5 61 17
24" Seat 28.0 26.3 45.0 19.0 25 24 19.5 65 22
30” Seat 34.0 26.3 45.0 19.0 25 30 19.5 76 28
ORDERING NOTES: The approval process is as follows:1. A sample of the COM must be provided to Krug Customer Service prior to or at the time of order. 2. The sample will be reviewed and the customer advised if the fabric is unsuitable.3. The COM fabric or leather will be inspected when received at the factory, to identify any further concerns with its suitability.Note: Some vinyls, leathers & upholsteries are not suitable for application on Faeron Metal seating.
WEIGHT CAPACITIESFaeron Metal weight capacities are as follows:Patient Chairs (21” & 24”) - 500 lbsPlus Patient Chair (30”) - 750 lbs
FEATURES:For a complete list of features see page 12.
COM - YARDAGE REQUIREMENTS COM Yardage COM Yardage COM Yardage COM Yardage
Seats & Backs Only Seat Only Back Only Closed Arm Panel
21” & 24” - One Chair 2.0 0.9 2.0 0.96 30” Plus - One Chair 3.0 0.9 2.0 0.96
Faeron Metal Option Upcharges $ List $ List
CAL 133 & Moisture Barrier (per yard) 49 Solid Surface Arm (per pair) - A White 437Ganging Bracket 44 Solid Surface Arm (per pair) - Gr A Color 456Kinetic Back (not available for Plus) 92 Solid Surface Arm (per pair) - Gr B 49221” & 24” Under-seat Splashguard 44 Solid Surface Arm (per pair) - Gr C 517Removeable Seat Covers 68 Beech/Palette Wood Arm (per pair) 164Removable Back Covers 44
A drawing showing the configuration of the multiple seating and tables is required with each purchase order. Combination upholstery (more than one upholstery cover within the same unit) is an option on all Faeron Metal upholstered products. When combinationupholstery is with upholstery of the same grade or COM, an upcharge for dual fabrics is $25 list per unit and $49 list per unit for three fabrics. When graded incombination upholstery is selected, use the highest grade upholstery selected or contact Customer Service for a quote -please provide the fabrics specifiedand a description of where each fabric is to be applied on the product in order to obtain a quote.
August 2019
50 | USA | HEALTHCARE
FAERON METAL | PATIENT
PRODUCT CODE KEY
Line Series Chair Type Size Arm Type Arm Style Metal Finish
Faeron Chair Patient Seating Open Arm Polymer Arm Silver Metallic
Semi Closed Arm Wood Arm Brushed Nickel
Closed Arm Solid Surface Arm
FAE 21
24
O
S
21” Open Polymer Arm, Silver Metallic Frame FAE2M-P21OPAS
21” Open Polymer Arm, Brushed Nickel FrameFAE2M-P21OPAN
21” Semi Closed Polymer Arm, Silver Metallic Frame FAE2M-P21SPAS
21” Semi Closed Polymer Arm, Brushed Nickel Frame FAE2M-P21SPAN
21” Closed Polymer Arm, Silver Metallic Frame FAE2M-P21CPAS
21” Closed Polymer Arm, Brushed Nickel Frame FAE2M-P21CPAN
24” Open Polymer Arm, Silver Metallic Frame FAE2M-P24OPAS
24” Open Polymer Arm, Brushed Nickel Frame FAE2M-P24OPAN
24” Semi Closed Polymer Arm, Silver Metallic Frame FAE2M-P24SPAS
24” Semi Closed Polymer Arm, Brushed Nickel Frame FAE2M-P24SPAN
24” Closed Polymer Arm, Silver Metallic Frame FAE2M-P24CPAS
24” Closed Polymer Arm, Brushed Nickel Frame FAE2M-P24CPAN
30 C
P2M PA
WA
SA
813 854 896 978 1061 1144 1227 1310 1475
960 1002 1043 1126 1209 1292 1374 1457 1623
1109 1166 1225 1341 1456 1572 1688 1804 2036
1256 1314 1373 1489 1604 1720 1836 1951 2183
1118 1175 1234 1350 1465 1581 1697 1813 2045
1265 1323 1382 1498 1613 1729 1845 1960 2192
862 904 945 1028 1111 1193 1276 1359 1525
1010 1051 1093 1175 1258 1341 1424 1507 1672
1158 1217 1274 1391 1507 1622 1738 1854 2085
1306 1364 1422 1538 1654 1769 1886 2002 2233
1167 1226 1283 1400 1516 1631 1747 1863 2094
1315 1373 1431 1547 1663 1778 1895 2011 2242
S
N
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL 1 2 3 4 5 6 7 8 9
ORDERING NOTES: Faeron Metal chairs can also be specified with a Wood Arm (WA) or aSolid Surface Arm (SA), replace “PA” in the model number with theArm Style selection below and add the upcharge listed.
Arm Style Option Upcharges $ List
Solid Surface Arm (per pair) - A White 437Solid Surface Arm (per pair) - Gr A Color 456Solid Surface Arm (per pair) - Gr B 492Solid Surface Arm (per pair) - Gr C 517Beech/Palette Wood Arm (per pair) 164
August 2019
HEALTHCARE | USA | 51
FAERON METAL | PATIENT
30” Open Polymer Arm, Silver Metallic FrameFAE2M-P30OPAS
30” Open Polymer Arm, Brushed Nickel Frame FAE2M-P30OPAN
30” Semi Closed Polymer Arm, Silver Metallic Frame FAE2M-P30SPAS
30” Semi Closed Polymer Arm, Brushed Nickel Frame FAE2M-P30SPAN
30” Closed Polymer Arm, Silver Metallic Frame FAE2M-P30CPAS
30” Closed Polymer Arm, Brushed Nickel Frame FAE2M-P30CPAN
1004 1067 1129 1253 1377 1501 1625 1750 1998
1152 1214 1276 1400 1525 1649 1773 1897 2146
1301 1380 1458 1616 1772 1930 2087 2245 2559
1448 1527 1606 1763 1920 2077 2235 2392 2706
1310 1389 1467 1625 1781 1939 2096 2254 2568
1457 1536 1615 1772 1929 2086 2244 2401 2715
PRODUCT CODE KEY
Line Series Chair Type Size Arm Type Arm Style Metal Finish
Faeron Chair Patient Seating Open Arm Polymer Arm Silver Metallic
Semi Closed Arm Wood Arm Brushed Nickel
Closed Arm Solid Surface Arm
FAE 21
24
O
S
30 C
P2M PA
WA
SA
S
N
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL 1 2 3 4 5 6 7 8 9
ORDERING NOTES: Faeron Metal chairs can also be specified with a Wood Arm (WA) or aSolid Surface Arm (SA), replace “PA” in the model number with theArm Style selection below and add the upcharge listed.
Arm Style Option Upcharges $ List
Solid Surface Arm (per pair) - A White 437Solid Surface Arm (per pair) - Gr A Color 456Solid Surface Arm (per pair) - Gr B 492Solid Surface Arm (per pair) - Gr C 517Beech/Palette Wood Arm (per pair) 164
August 2019
52 | USA | HEALTHCARE
FAERON METAL | MULTIPLE SEATING INSTRUCTIONS
To aid you in the process of specifying and ordering Faeron Metal Multiple Seating, we have compiled the following summary. It explains thethree different types of Faeron Metal Multiple Seating – (a) Pre-Configured, (b) Start, Center & End Units and (c) the Freespan Multiple Units– including the features and considerations of each type, to assist in selecting the one that best suits each application. It is a requirementfor all Faeron Metal Multiple Seating orders, a drawing or plan view layout must accompany the order, so that we can verify that thespecification is correct.
When building your multiple seating layout, please note that your order should start from left to right as you are facing the configuration.
Pre-Configured Multiple UnitsPre-Configured Multiple Units are designed to be used when you have seating configurations that are 2-3 chair units in size.
Considerations if choosing to use Pre-Configured Units:• Linking tables can be joined to either end of a Pre-Configured Multiple Unit, but not in-between• There are no limitations to the number of Pre-Configured Multiple units that can be ganged together with Linking Tables• Pre-Configured Multiple Units are not available in 30” or 44” widths• Pre-Configured Multiple Units are not designed to work with other multiple seating (Start, Center, End Units or Freespan Units) unless a
Linking Table or linking brackets are used in-between the different types of multiple seating.• Pre-Configured Multiple Units are built from Start, Center and End Units and therefore, can be reconfigured to singular or two-seat units.
However, you may have to purchase additional components (arms, etc…) to be able to do this. See line drawings below for possible configurations that can be made from taking apart the Pre-Configured Multiple Units.
*Please note:Example #1-A requires an additional end unit arm for chair A, and a start unit arm for chair B.
Example #1-B requires an additional end unit arm for chair A, a start and end unit arm for chair B, and a start unit arm for chair C.
Start, Center and End Multiple Seating UnitsStart, Center and End Multiple Units are designed to be used when you have seating configurations that are greater than three chair units insize, and/or include 30” or 44” units. Also, before you start to build your multiple seating layout, please note that your order should start fromleft to right as you are facing the chair, therefore begin the configuration with a Start Unit, then move to a Center Unit and finish with an EndUnit.
Considerations if choosing to use Start, Center and End Multiple Units:• Start, Center and End units are available in all widths (21”, 24”, 30” & 44”)• There are no limitations to the amount of center units that can be ganged to a start or an end unit• Linking Tables can be joined to any Faeron Metal Start or End unit only (this is because the units are engineered with the finished arms)
EXAMPLE #1
EXAMPLE #1-A
EXAMPLE #1-B
August 2019
HEALTHCARE | USA | 53
FAERON METAL | MULTIPLE SEATING INSTRUCTIONS
See below for sample a configuration of when you would use Start, Center and End Multiple Units.
Freespan Multiple UnitsFreespan Multiple Units are designed to be used when you have seating configurations that are 2-3 chair units in size and a reduced numberof legs are desirable. (see picture below).
Considerations if choosing to use Freespan Multiple Units:• Freespan Multiple Units come with a choice of a pre-configured unit with or without a center arm• The unit with the center arm increases the overall width of the unit by 1” per arm• Linking tables can be joined to either side of a Freespan Multiple Unit, but not in-between• There are no limitations to the number of Freespan Multiple units that can be ganged together with Linking Tables or linking brackets.• Freespan Multiple Units are not available in 30” or 44” plus widths• Freespan Multiple Units are not designed to work with other multiple seating (Start, Center, End Units or Freespan Units) unless a Link-ing Table orlinking brackets are used in-between the different types of multiple seating.
Below illustrates possible configurations when you could use all three types of Faeron Metal Multiple Seating together.
For more information on how to specify Faeron Metal Multiple Seating, please contact Customer Service directly at 1-888-578-5784.
NO.A
IS THE SOLE PROPERTY OF
K
LegendCT- Corner TableFS – Freespan Multiple SeatingPG – Pre-Configured MultipleSeatingS – Start UnitC – Center UnitE – End UnitLT - Linking Table
CTPGPGPGLT
C
C
C
S S
E
E
LT
FS
FS
August 2019
54 | USA | HEALTHCARE
FAERON METAL | MULTIPLE SEATING - PRECONFIGURED UNITS
WEIGHT CAPACITIESFaeron Metal weight capacities are as follows:Guest & Patient Chairs (21” & 24”) - 500 lbs
DIMENSIONS & COM REQUIREMENTS
COM COM COM COMHeight of Width Seat & Fabric Fabric Fabric
Overall Overall Overall Seat Arms Between Seat Shipping Back Seat Back Closed ArmWidth Depth Height Height from Floor Arms Depth Weight Cube Yardage Yardage Yardage Panel Yardage
PCG21X2 48.3 26.3 34.5 19.0 25.0 21 19.5 95 28 3.0 1.5 2.1 1.44PCP21X2 48.3 26.3 45.0 19.0 25.0 21 19.5 105 38 3.8 1.5 3.0 1.44
PCG21X3 71.5 26.3 34.5 19.0 25.0 21 19.5 134 41 4.6 2.4 3.5 1.92PCP21X3 71.5 26.3 45.0 19.0 25.0 21 19.5 149 56 5.8 2.4 5.0 1.92
PCG24X2 54.3 26.3 34.5 19.0 25.0 24 19.5 102 31 3.0 1.5 2.1 1.44PCP24X2 54.3 26.3 45.0 19.0 25.0 24 19.5 112 43 3.8 1.5 3.0 1.44
PCG24X3 80.5 26.3 34.5 19.0 25.0 24 19.5 146 46 4.6 2.4 3.5 1.92PCP24X3 80.5 26.3 45.0 19.0 25.0 24 19.5 161 63 5.8 2.4 5.0 1.92
Note: Some vinyls, leathers & upholsteries are not suitable for application on Faeron Metal seating. Please refer to page 9 for C.O.M approvalprocess.
CONTRASTING BACKS, SEATS & CLOSED ARMS Combination upholstery (more than one upholstery cover within the same unit) is an option on all Faeron Metal upholstered products. When combination up-holstery is with upholstery of the same grade or COM, an upcharge for dual fabrics is $25 list per unit and $49 list per unit for three fabrics. When graded incombination upholstery is selected, use the highest grade upholstery selected or contact Customer Service for a quote -please provide the fabrics specified anda description of where each fabric is to be applied on the product in order to obtain a quote.A drawing showing the configuration of the multiple seating and tables is required with each purchase order.
PRE-CONFIGURED MULTIPLE UNITS SEAT GUEST BACK PATIENT BACK CLOSED ARM PANEL
PC21x2 3.8 1.5 3.0 1.44PC21x3 5.8 2.4 5.0 1.92PC24X2 3.8 1.5 3.0 1.44PC24X3 5.8 2.4 5.0 1.92
FEATURES:
For a complete list of features see page 12.
Patient backs are available on multiple units, please change the model number FAE2M-PCG to FAE2M-PCP, and add the followingupcharges per back:
Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 921” Chairs $48 57 68 87 105 125 144 164 20224” Chairs $52 62 72 91 111 130 149 168 207
Faeron Option Upcharges $ List $ List $ List
CAL 133 & Moisture Barrier (per yard) 49 Solid Surface Arm (each) - A White 219 Solid Surface Arm (pair) - A White 437Ganging Bracket 44 Solid Surface Arm (each) - Gr A Color 228 Solid Surface Arm (pair) - Gr A Color 456Kinetic Back (not available for Plus) 92 Solid Surface Arm (each) - Gr B 246 Solid Surface Arm (pair) - Gr B 49221” & 24” Under-seat Splashguard 44 Solid Surface Arm (each) - Gr C 259 Solid Surface Arm (pair) - Gr C 517Removeable Seat Covers 68 Beech/Palette Wood Arm (each) 82 Beech/Palette Wood Arm (per pair) 164Removable Back Covers 44
August 2019
HEALTHCARE | USA | 55
FAERON METAL | MULTIPLE SEATING - PRECONFIGURED UNITS
PRODUCT CODE KEY
Line Series Chair Type Back Type Size Arm Type Arm Style Metal Finish
Faeron Chair Pre-configured Guest Open Arm Polymer Arm Silver Metallic Multiple Unit
Patient Semi Closed Arm Wood Arm Brushed Nickel
Closed Arm Solid Surface Arm
FAE 21X2
24X2
O
S
21X3
24X3
C
UC2M PA
WA
SA
1364 1431 1498 1630 1762 1895 2027 2159 2424
1586 1652 1719 1851 1984 2116 2248 2381 2645
1829 1920 2011 2192 2375 2557 2739 2921 3285
2050 2141 2232 2414 2597 2778 2960 3142 3506
1847 1938 2029 2210 2393 2575 2757 2939 3303
2068 2159 2250 2432 2615 2796 2978 3160 3524
1494 1560 1626 1759 1891 2023 2156 2288 2553
1715 1781 1848 1980 2112 2245 2377 2509 2775
1958 2048 2139 2321 2504 2686 2867 3050 3414
2179 2270 2361 2543 2725 2907 3089 3272 3635
1976 2066 2157 2339 2522 2704 2885 3068 3432
2197 2288 2379 2561 2743 2925 3107 3290 3653
S
N
G
P
2 Seat - 21” Open Polymer Arm Pre-configured Unit, Guest Backs, Silver Metallic Frame FAE2M-PCG21X2OPAS
2 Seat - 21” Open Polymer Arm Pre-configured Unit, Guest Backs, Brushed Nickel Frame FAE2M-PCG21X2OPAN
2 Seat - 21” Semi Closed Polymer Arm Pre-configured Unit, Guest Backs, Silver Metallic Frame FAE2M-PCG21X2SPAS
2 Seat - 21” Semi Closed Polymer Arm Pre-configured Unit, Guest Backs, Brushed Nickel Frame FAE2M-PCG21X2SPAN
2 Seat - 21” Closed Polymer Arm Pre-configured Unit, Guest Backs, Silver Metallic Frame FAE2M-PCG21X2CPAS
2 Seat - 21” Closed Polymer Arm Pre-configured Unit, Guest Backs, Brushed Nickel Frame FAE2M-PCG21X2CPAN
2 Seat - 24” Open Polymer Arm Pre-configured Unit, Guest Backs, Silver Metallic Frame FAE2M-PCG24X2OPAS
2 Seat - 24” Open Polymer Arm Pre-configured Unit, Guest Backs, Brushed Nickel Frame FAE2M-PCG24X2OPAN
2 Seat - 24” Semi Closed Polymer Arm Pre-configured Unit, Guest Backs, Silver Metallic Frame FAE2M-PCG24X2SPAS
2 Seat - 24” Semi Closed Polymer Arm Pre-configured Unit, Guest Backs, Brushed Nickel Frame FAE2M-PCG24X2SPAN
2 Seat - 24” Closed Polymer Arm Pre-configured Unit, Guest Backs, Silver Metallic Frame FAE2M-PCG24X2CPAS
2 Seat - 24” Closed Polymer Arm Pre-configured Unit, Guest Backs, Brushed Nickel Frame FAE2M-PCG24X2CPAN
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL 1 2 3 4 5 6 7 8 9
ORDERING NOTES: Faeron Metal chairs can also be specified with a Wood Arm (WA) or aSolid Surface Arm (SA), replace “PA” in the model number with theArm Style selection below and add the upcharge listed.
Arm Style Option Upcharges $ List
Solid Surface Arm (per pair) - A White 437Solid Surface Arm (per pair) - Gr A Color 456Solid Surface Arm (per pair) - Gr B 492Solid Surface Arm (per pair) - Gr C 517Beech/Palette Wood Arm (per pair) 164
August 2019
56 | USA | HEALTHCARE
FAERON METAL | MULTIPLE SEATING - PRECONFIGURED UNITS
PRODUCT CODE KEY
Line Series Chair Type Back Type Size Arm Type Arm Style Metal Finish
Faeron Chair Pre-configured Guest Open Arm Polymer Arm Silver Metallic Multiple Unit
Patient Semi Closed Arm Wood Arm Brushed Nickel
Closed Arm Solid Surface Arm
FAE 21X2
24X2
O
S
21X3
24X3
C
PC2M PA
WA
SA
1946 2046 2145 2344 2543 2741 2939 3138 3535
2241 2341 2440 2639 2838 3036 3235 3434 3830
2578 2710 2842 3107 3372 3637 3902 4166 4696
2873 3005 3137 3402 3668 3932 4197 4461 4991
2605 2737 2869 3134 3399 3664 3929 4193 4723
2900 3032 3164 3429 3695 3959 4224 4488 5018
2097 2162 2261 2460 2658 2857 3056 3254 3651
2392 2457 2556 2755 2953 3152 3351 3550 3947
2729 2826 2958 3223 3488 3753 4018 4282 4812
3024 3121 3254 3518 3784 4048 4313 4577 5108
2756 2853 2985 3250 3515 3780 4045 4309 4839
3051 3148 3281 3545 3811 4075 4340 4604 5135
S
N
G
P
3 Seat - 21” Open Polymer Arm Pre-configured Unit, Guest Backs, Silver Metallic Frame FAE2M-PCG21X3OPAS
3 Seat - 21” Open Polymer Arm Pre-configured Unit, Guest Backs, Brushed Nickel Frame FAE2M-PCG21X3OPAN
3 Seat - 21” Semi Closed Polymer Arm Pre-configured Unit, Guest Backs, Silver Metallic Frame FAE2M-PCG21X3SPAS
3 Seat - 21” Semi Closed Polymer Arm Pre-configured Unit, Guest Backs, Brushed Nickel Frame FAE2M-PCG21X3SPAN
3 Seat - 21” Closed Polymer Arm Pre-configured Unit, Guest Backs, Silver Metallic Frame FAE2M-PCG21X3CPAS
3 Seat - 21” Closed Polymer Arm Pre-configured Unit, Guest Backs, Brushed Nickel Frame FAE2M-PCG21X3CPAN
3 Seat - 24” Open Polymer Arm Pre-configured Unit, Guest Backs, Silver Metallic Frame FAE2M-PCG24X3OPAS
3 Seat - 24” Open Polymer Arm Pre-configured Unit, Guest Backs, Brushed Nickel Frame FAE2M-PCG24X3OPAN
3 Seat - 24” Semi Closed Polymer Arm Pre-configured Unit, Guest Backs, Silver Metallic Frame FAE2M-PCG24X3SPAS
3 Seat - 24” Semi Closed Polymer Arm Pre-configured Unit, Guest Backs, Brushed Nickel Frame FAE2M-PCG24X3SPAN
3 Seat - 24” Closed Polymer Arm Pre-configured Unit, Guest Backs, Silver Metallic Frame FAE2M-PCG24X3CPAS
3 Seat - 24” Closed Polymer Arm Pre-configured Unit, Guest Backs, Brushed Nickel Frame FAE2M-PCG24X3CPAN
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL 1 2 3 4 5 6 7 8 9
ORDERING NOTES: Faeron Metal chairs can also be specified with a Wood Arm (WA) or aSolid Surface Arm (SA), replace “PA” in the model number with theArm Style selection below and add the upcharge listed.
Arm Style Option Upcharges $ List
Solid Surface Arm (per pair) - A White 437Solid Surface Arm (per pair) - Gr A Color 456Solid Surface Arm (per pair) - Gr B 492Solid Surface Arm (per pair) - Gr C 517Beech/Palette Wood Arm (per pair) 164
August 2019
HEALTHCARE | USA | 57
FAERON METAL | MULTIPLE SEATING - START, CENTER & END UNITS
COM COM COM COM Fabric
Height of Width Seat & Fabric Fabric Closed Arm Overall Overall Overall Seat Arms Between Seat Shipping Back Seat Back Panel (Pair) Width Depth Height Height from Floor Arms Depth Weight Cube Yardage Yardage Yardage Yardage
SG21 25 26.3 34.5 19 25 21 19.5 56 14 1.6 0.9 1.4 0.96SP21 25 26.3 45 19 25 21 19.5 61 17 2.0 0.9 2.0 0.96SG24 28 26.3 34.5 19 25 24 19.5 60 19 1.6 0.9 1.4 0.96SP24 28 26.3 45 19 25 24 19.5 65 22 2.0 0.9 2.0 0.96SG30 34 26.3 34.5 19 25 30 19.5 66 20 2.3 0.9 1.4 0.96 SP30 34 26.3 45 19 25 30 19.5 76 28 3.0 0.9 2.0 0.96 SG44 48 26.3 34.5 19 25 44 19.5 83 28 2.9 0.9 1.6 0.96
FAERON METAL MULTIPLE START UNITS
COM COM COM COM Fabric Height of Width Seat & Fabric Fabric Closed Arm
Overall Overall Overall Seat Arms Between Seat Shipping Back Seat Back Panel Width Depth Height Height from Floor Arms Depth Weight Cube Yardage Yardage Yardage Yardage
CG21 25 26.3 34.5 19 25 21 19.5 46 14 1.6 0.9 1.4 0.48 CP21 25 26.3 45 19 25 21 19.5 51 17 2.0 0.9 2.0 0.48CG24 28 26.3 34.5 19 25 24 19.5 50 19 1.6 0.9 1.4 0.48 CP24 28 26.3 45 19 25 24 19.5 55 22 2.0 0.9 2.0 0.48CG30 34 26.3 34.5 19 25 30 19.5 56 20 2.3 0.9 1.4 0.48 CP30 34 26.3 45 19 25 30 19.5 66 28 3.0 0.9 2.0 0.48CG44 48 26.3 34.5 19 25 44 19.5 73 28 2.9 0.9 1.6 0.48
FAERON METAL MULTIPLE CENTER UNITS
DIMENSIONS & COM REQUIREMENTS
COM COM COM COM Height of Width Seat & Fabric Fabric Fabric
Overall Overall Overall Seat Arms Between Seat Shipping Back Seat Back Closed ArmWidth Depth Height Height from Floor Arms Depth Weight Cube Yardage Yardage Yardage Panel Yardage
EG21 25 26.3 34.5 19 25 21 19.5 46 14 1.6 0.9 1.4 0.48EP21 25 26.3 45 19 25 21 19.5 51 17 2.0 0.9 2.0 0.48EG24 28 26.3 34.5 19 25 24 19.5 50 19 1.6 0.9 1.4 0.48EP24 28 26.3 45 19 25 24 19.5 55 22 2.0 0.9 2.0 0.48EG30 34 26.3 34.5 19 25 30 19.5 56 20 2.3 0.9 1.4 0.48EP30 34 26.3 45 19 25 30 19.5 66 28 3.0 0.9 2.0 0.48EG44 48 26.3 34.5 19 25 44 19.5 73 28 2.9 0.9 1.6 0.48
When ordering more than one Start, Center or End unit, please refer to page 14 for COM yardage requirements for guest chairs or page 18 for COM yardagerequirements for patient chairs.
FAERON METAL MULTIPLE END UNITS
ORDERING NOTES: A drawing showing the configuration of the multiple seating and tables is required with each purchase order. Combination upholstery (more than one upholstery cover within the same unit) is an option on all Faeron Metal upholstered products. When combinationupholstery is with upholstery of the same grade or COM, an upcharge for dual fabrics is $25 list per unit and $49 list per unit for three fabrics. When graded incombination upholstery is selected, use the highest grade upholstery selected or contact Customer Service for a quote -please provide the fabrics specifiedand a description of where each fabric is to be applied on the product in order to obtain a quote.
Patient backs are available on multiple units, please change the model number FAE2M-SG to FAE2M-SP and add the following upchargesper back:
Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 921” Chairs $48 57 68 87 105 125 144 164 20224” Chairs $52 62 72 91 111 130 149 168 20730” Chairs $63 73 83 102 121 141 160 180 218
WEIGHT CAPACITIESFaeron Metal weight capacities are as follows:Guest & Patient Chairs (21” & 24”) - 500 lbs
FEATURES:
For a complete list of features see page 12.
Faeron Option Upcharges $ List $ List $ List
CAL 133 & Moisture Barrier (per yard) 49 Solid Surface Arm (each) - A White 219 Solid Surface Arm (pair) - A White 437Ganging Bracket 44 Solid Surface Arm (each) - Gr A Color 228 Solid Surface Arm (pair) - Gr A Color 456Kinetic Back (not available for Plus) 92 Solid Surface Arm (each) - Gr B 246 Solid Surface Arm (pair) - Gr B 49221” & 24” Under-seat Splashguard 44 Solid Surface Arm (each) - Gr C 259 Solid Surface Arm (pair) - Gr C 517Removeable Seat Covers 68 Beech/Palette Wood Arm (each) 82 Beech/Palette Wood Arm (per pair) 164Removable Back Covers 44
August 2019
58 | USA | HEALTHCARE
PRODUCT CODE KEY
Line Series Chair Type Back Type Size Arm Type Arm Style Metal Finish
Faeron Chair Start Unit Guest Open Arm Polymer Arm Silver Metallic Multiple Seating
Patient Semi Closed Arm Wood Arm Brushed Center Unit Nickel Multiple Seating Closed Arm Solid Surface Arm End Unit Multiple Seating
FAE 21
24
O
S
30 C
S2M PA
WA
SA
S
N
G
P
FAERON METAL | MULTIPLE SEATING - START, CENTER & END UNITS
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL 1 2 3 4 5 6 7 8 9
21” Open Polymer Arm Start Unit, Guest Back, Silver Metallic Frame FAE2M-SG21OPAS
21” Open Polymer Arm Start Unit, Guest Back, Brushed Nickel Frame FAE2M-SG21OPAN
21” Semi Closed Polymer Arm Start Unit, Guest Back, Silver Metallic Frame FAE2M-SG21SPAS
21” Semi Closed Polymer Arm Start Unit, Guest Back, Brushed Nickel Frame FAE2M-SG21SPAN
21” Closed Polymer Arm Start Unit, Guest Back, Silver Metallic Frame FAE2M-SG21CPAS
21” Closed Polymer Arm Start Unit, Guest Back, Brushed Nickel Frame FAE2M-SG21CPAN
24” Open Polymer Arm Start Unit, Guest Back, Silver Metallic Frame FAE2M-SG24OPAS
24” Open Polymer Arm Start Unit, Guest Back, Brushed Nickel Frame FAE2M-SG24OPAN
24” Semi Closed Polymer Arm Start Unit, Guest Back, Silver Metallic Frame FAE2M-SG24SPAS
24” Semi Closed Polymer Arm Start Unit, Guest Back, Brushed Nickel Frame FAE2M-SG24SPAN
24” Closed Polymer Arm Start Unit, Guest Back, Silver Metallic Frame FAE2M-SG24CPAS
24” Closed Polymer Arm Start Unit, Guest Back, Brushed Nickel Frame FAE2M-SG24CPAN
Start
C
E
772 806 838 905 970 1037 1103 1169 1301
920 953 986 1052 1118 1184 1251 1317 1449
1068 1118 1167 1267 1366 1465 1565 1664 1863
1216 1265 1315 1415 1514 1613 1713 1812 2011
1077 1127 1176 1276 1375 1474 1574 1673 1872
1225 1274 1324 1424 1523 1622 1722 1821 2020
832 865 898 964 1031 1096 1163 1229 1361
979 1013 1046 1112 1178 1244 1310 1376 1508
1128 1177 1227 1327 1426 1525 1625 1724 1922
1275 1325 1374 1474 1573 1672 1772 1871 2070
1137 1186 1236 1336 1435 1534 1634 1733 1931
1284 1334 1383 1483 1582 1681 1781 1880 2079
ORDERING NOTES: Faeron Metal chairs can also be specified with a Wood Arm (WA) or aSolid Surface Arm (SA), replace “PA” in the model number with theArm Style selection below and add the upcharge listed.
Arm Style Option Upcharges $ List
Solid Surface Arm (per pair) - A White 437Solid Surface Arm (per pair) - Gr A Color 456Solid Surface Arm (per pair) - Gr B 492Solid Surface Arm (per pair) - Gr C 517Beech/Palette Wood Arm (per pair) 164
44
August 2019
HEALTHCARE | USA | 59
PRODUCT CODE KEY
Line Series Chair Type Back Type Size Arm Type Arm Style Metal Finish
Faeron Chair Start Unit Guest Open Arm Polymer Arm Silver Metallic Multiple Seating
Patient Semi Closed Arm Wood Arm Brushed Center Unit Nickel Multiple Seating Closed Arm Solid Surface Arm End Unit Multiple Seating
FAE 21
24
O
S
30 C
S2M PA
WA
SA
S
N
G
P
FAERON METAL | MULTIPLE SEATING - START, CENTER & END UNITS
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL 1 2 3 4 5 6 7 8 9
30” Open Polymer Arm Start Unit, Guest Back, Silver Metallic Frame FAE2M-SG30OPAS
30” Open Polymer Arm Start Unit, Guest Back, Brushed Nickel Frame FAE2M-SG30OPAN
30” Semi Closed Polymer Arm Start Unit, Guest Back, Silver Metallic Frame FAE2M-SG30SPAS
30” Semi Closed Polymer Arm Start Unit, Guest Back, Brushed Nickel Frame FAE2M-SG30SPAN
30” Closed Polymer Arm Start Unit, Guest Back, Silver Metallic Frame FAE2M-SG30CPAS
30” Closed Polymer Arm Start Unit, Guest Back, Brushed Nickel Frame FAE2M-SG30CPAN
44” Open Polymer Arm Start Unit, Guest Back, Silver Metallic Frame FAE2M-SG44OPAS
44” Open Polymer Arm Start Unit, Guest Back, Brushed Nickel Frame FAE2M-SG44OPAN
44” Semi Closed Polymer Arm Start Unit, Guest Back, Silver Metallic Frame FAE2M-SG44SPAS
44” Semi Closed Polymer Arm Start Unit, Guest Back, Brushed Nickel Frame FAE2M-SG44SPAN
44” Closed Polymer Arm Start Unit, Guest Back, Silver Metallic Frame FAE2M-SG44CPAS
44” Closed Polymer Arm Start Unit, Guest Back, Brushed Nickel Frame FAE2M-SG44CPAN
Start
C
E
956 1003 1050 1146 1241 1337 1431 1526 1717
1103 1150 1198 1293 1389 1484 1579 1674 1865
1252 1316 1380 1508 1636 1765 1893 2021 2278
1400 1463 1527 1656 1784 1913 2040 2169 2426
1261 1325 1389 1517 1645 1774 1902 2030 2287
1409 1472 1536 1665 1793 1922 2049 2178 2435
1185 1245 1305 1425 1545 1665 1785 1905 2145
1333 1392 1453 1572 1693 1813 1932 2053 2292
1481 1558 1634 1787 1940 2093 2246 2399 2706
1629 1706 1782 1935 2088 2241 2394 2547 2854
1490 1567 1643 1796 1949 2102 2255 2408 2715
1638 1715 1791 1944 2097 2250 2403 2556 2863
ORDERING NOTES: Faeron Metal chairs can also be specified with a Wood Arm (WA) or aSolid Surface Arm (SA), replace “PA” in the model number with theArm Style selection below and add the upcharge listed.
Arm Style Option Upcharges $ List
Solid Surface Arm (per pair) - A White 437Solid Surface Arm (per pair) - Gr A Color 456Solid Surface Arm (per pair) - Gr B 492Solid Surface Arm (per pair) - Gr C 517Beech/Palette Wood Arm (per pair) 164
44
August 2019
60 | USA | HEALTHCARE
PRODUCT CODE KEY
Line Series Chair Type Back Type Size Arm Type Arm Style Metal Finish
Faeron Chair Start Unit Guest Open Arm Polymer Arm Silver Metallic Multiple Seating
Patient Semi Closed Arm Wood Arm Brushed Center Unit Nickel Multiple Seating Closed Arm Solid Surface Arm End Unit Multiple Seating
FAE 21
24
O
S
30 C
S2M PA
WA
SA
S
N
G
P
FAERON METAL | MULTIPLE SEATING - START, CENTER & END UNITS
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL 1 2 3 4 5 6 7 8 9
21” Open Polymer Arm Center Unit, Guest Back, Silver Metallic Frame FAE2M-CG21OPAS
21” Open Polymer Arm Center Unit, Guest Back, Brushed Nickel Frame FAE2M-CG21OPAN
21” Semi Closed Polymer Arm Center Unit, Guest Back, Silver Metallic Frame FAE2M-CG21SPAS
21” Semi Closed Polymer Arm Center Unit, Guest Back, Brushed Nickel Frame FAE2M-CG21SPAN
21” Closed Polymer Arm Center Unit, Guest Back, Silver Metallic Frame FAE2M-CG21CPAS
21” Closed Polymer Arm Center Unit, Guest Back, Brushed Nickel Frame FAE2M-CG21CPAN
24” Open Polymer Arm Center Unit, Guest Back, Silver Metallic Frame FAE2M-CG24OPAS
24” Open Polymer Arm Center Unit, Guest Back, Brushed Nickel Frame FAE2M-CG24OPAN
24” Semi Closed Polymer Arm Center Unit, Guest Back, Silver Metallic Frame FAE2M-CG24SPAS
24” Semi Closed Polymer Arm Center Unit, Guest Back, Brushed Nickel Frame FAE2M-CG24SPAN
24” Closed Polymer Arm Center Unit, Guest Back, Silver Metallic Frame FAE2M-CG24CPAS
24” Closed Polymer Arm Center Unit, Guest Back, Brushed Nickel Frame FAE2M-CG24CPAN
Center
C
E
730 763 797 863 929 995 1061 1128 1260
804 837 870 937 1003 1069 1135 1202 1334
898 940 981 1064 1147 1229 1311 1394 1560
972 1013 1055 1138 1220 1302 1385 1468 1634
907 949 990 1073 1156 1238 1320 1403 1569
981 1022 1064 1147 1229 1311 1394 1477 1643
790 823 856 923 988 1055 1121 1187 1319
864 896 930 996 1062 1129 1194 1261 1393
958 999 1040 1123 1206 1289 1372 1454 1619
1031 1073 1114 1197 1280 1363 1445 1528 1693
967 1008 1049 1132 1215 1298 1381 1463 1628
1040 1082 1123 1206 1289 1372 1454 1537 1702
ORDERING NOTES: Faeron Metal chairs can also be specified with a Wood Arm (WA) or aSolid Surface Arm (SA), replace “PA” in the model number with theArm Style selection below and add the upcharge listed.
Arm Style Option Upcharges $ List
Solid Surface Arm (per pair) - A White 437Solid Surface Arm (per pair) - Gr A Color 456Solid Surface Arm (per pair) - Gr B 492Solid Surface Arm (per pair) - Gr C 517Beech/Palette Wood Arm (per pair) 164
44
August 2019
HEALTHCARE | USA | 61
PRODUCT CODE KEY
Line Series Chair Type Back Type Size Arm Type Arm Style Metal Finish
Faeron Chair Start Unit Guest Open Arm Polymer Arm Silver Metallic Multiple Seating
Patient Semi Closed Arm Wood Arm Brushed Center Unit Nickel Multiple Seating Closed Arm Solid Surface Arm End Unit Multiple Seating
FAE 21
24
O
S
30 C
S2M PA
WA
SA
S
N
G
P
FAERON METAL | MULTIPLE SEATING - START, CENTER & END UNITS
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL 1 2 3 4 5 6 7 8 9
30” Open Polymer Arm Center Unit, Guest Back, Silver Metallic Frame FAE2M-CG30OPAS
30” Open Polymer Arm Center Unit, Guest Back, Brushed Nickel Frame FAE2M-CG30OPAN
30” Semi Closed Polymer Arm Center Unit, Guest Back, Silver Metallic Frame FAE2M-CG30SPAS
30” Semi Closed Polymer Arm Center Unit, Guest Back, Brushed Nickel Frame FAE2M-CG30SPAN
30” Closed Polymer Arm Center Unit, Guest Back, Silver Metallic Frame FAE2M-CG30CPAS
30” Closed Polymer Arm Center Unit, Guest Back, Brushed Nickel Frame FAE2M-CG30CPAN
44” Open Polymer Arm Center Unit, Guest Back, Silver Metallic Frame FAE2M-CG44OPAS
44” Open Polymer Arm Center Unit, Guest Back, Brushed Nickel Frame FAE2M-CG44OPAN
44” Semi Closed Polymer Arm Center Unit, Guest Back, Silver Metallic Frame FAE2M-CG44SPAS
44” Semi Closed Polymer Arm Center Unit, Guest Back, Brushed Nickel Frame FAE2M-CG44SPAN
44” Closed Polymer Arm Center Unit, Guest Back, Silver Metallic Frame FAE2M-CG44CPAS
44” Closed Polymer Arm Center Unit, Guest Back, Brushed Nickel Frame FAE2M-CG44CPAN
Center
C
E
914 961 1009 1104 1199 1294 1390 1485 1675
987 1035 1083 1178 1273 1368 1463 1559 1749
1081 1138 1193 1305 1417 1528 1640 1751 1976
1155 1211 1267 1379 1490 1602 1714 1825 2049
1090 1147 1202 1314 1426 1537 1649 1760 1985
1164 1220 1276 1388 1499 1611 1723 1834 2058
1143 1203 1264 1383 1503 1624 1743 1863 2103
1217 1277 1337 1457 1577 1697 1817 1937 2177
1311 1379 1447 1584 1721 1857 1994 2130 2403
1385 1453 1521 1658 1795 1931 2067 2204 2477
1320 1388 1456 1593 1730 1866 2003 2139 2412
1394 1462 1530 1667 1804 1940 2076 2213 2486
ORDERING NOTES: Faeron Metal chairs can also be specified with a Wood Arm (WA) or aSolid Surface Arm (SA), replace “PA” in the model number with theArm Style selection below and add the upcharge listed.
Arm Style Option Upcharges $ List
Solid Surface Arm (per pair) - A White 437Solid Surface Arm (per pair) - Gr A Color 456Solid Surface Arm (per pair) - Gr B 492Solid Surface Arm (per pair) - Gr C 517Beech/Palette Wood Arm (per pair) 164
44
August 2019
62 | USA | HEALTHCARE
PRODUCT CODE KEY
Line Series Chair Type Back Type Size Arm Type Arm Style Metal Finish
Faeron Chair Start Unit Guest Open Arm Polymer Arm Silver Metallic Multiple Seating
Patient Semi Closed Arm Wood Arm Brushed Center Unit Nickel Multiple Seating Closed Arm Solid Surface Arm End Unit Multiple Seating
FAE 21
24
O
S
30 C
S2M PA
WA
SA
S
N
G
P
FAERON METAL | MULTIPLE SEATING - START, CENTER & END UNITS
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL 1 2 3 4 5 6 7 8 9
21” Open Polymer Arm End Unit, Guest Back, Silver Metallic Frame FAE2M-EG21OPAS
21” Open Polymer Arm End Unit, Guest Back, Brushed Nickel Frame FAE2M-EG21OPAN
21” Semi Closed Polymer Arm End Unit, Guest Back, Silver Metallic Frame FAE2M-EG21SPAS
21” Semi Closed Polymer Arm End Unit, Guest Back, Brushed Nickel Frame FAE2M-EG21SPAN
21” Closed Polymer Arm End Unit, Guest Back, Silver Metallic Frame FAE2M-EG21CPAS
21” Closed Polymer Arm End Unit, Guest Back, Brushed Nickel Frame FAE2M-EG21CPAN
24” Open Polymer Arm End Unit, Guest Back, Silver Metallic Frame FAE2M-EG24OPAS
24” Open Polymer Arm End Unit, Guest Back, Brushed Nickel Frame FAE2M-EG24OPAN
24” Semi Closed Polymer Arm End Unit, Guest Back, Silver Metallic Frame FAE2M-EG24SPAS
24” Semi Closed Polymer Arm End Unit, Guest Back, Brushed Nickel Frame FAE2M-EG24SPAN
24” Closed Polymer Arm End Unit, Guest Back, Silver Metallic Frame FAE2M-EG24CPAS
24” Closed Polymer Arm End Unit, Guest Back, Brushed Nickel Frame FAE2M-EG24CPAN
End
C
E
ORDERING NOTES: Faeron Metal chairs can also be specified with a Wood Arm (WA) or aSolid Surface Arm (SA), replace “PA” in the model number with theArm Style selection below and add the upcharge listed.
Arm Style Option Upcharges $ List
Solid Surface Arm (per pair) - A White 437Solid Surface Arm (per pair) - Gr A Color 456Solid Surface Arm (per pair) - Gr B 492Solid Surface Arm (per pair) - Gr C 517Beech/Palette Wood Arm (per pair) 164
44
730 763 797 863 929 995 1061 1128 1260
804 837 870 937 1003 1069 1135 1202 1334
898 940 981 1064 1147 1229 1311 1394 1560
972 1013 1055 1138 1220 1302 1385 1468 1634
907 949 990 1073 1156 1238 1320 1403 1569
981 1022 1064 1147 1229 1311 1394 1477 1643
790 823 856 923 988 1055 1121 1187 1319
864 896 930 996 1062 1129 1194 1261 1393
958 999 1040 1123 1206 1289 1372 1454 1619
1031 1073 1114 1197 1280 1363 1445 1528 1693
967 1008 1049 1132 1215 1298 1381 1463 1628
1040 1082 1123 1206 1289 1372 1454 1537 1702
August 2019
HEALTHCARE | USA | 63
PRODUCT CODE KEY
Line Series Chair Type Back Type Size Arm Type Arm Style Metal Finish
Faeron Chair Start Unit Guest Open Arm Polymer Arm Silver Metallic Multiple Seating
Patient Semi Closed Arm Wood Arm Brushed Center Unit Nickel Multiple Seating Closed Arm Solid Surface Arm End Unit Multiple Seating
FAE 21
24
O
S
30 C
S2M PA
WA
SA
S
N
G
P
FAERON METAL | MULTIPLE SEATING - START, CENTER & END UNITS
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL 1 2 3 4 5 6 7 8 9
30” Open Polymer Arm End Unit, Guest Back, Silver Metallic Frame FAE2M-EG30OPAS
30” Open Polymer Arm End Unit, Guest Back, Brushed Nickel Frame FAE2M-EG30OPAN
30” Semi Closed Polymer Arm End Unit, Guest Back, Silver Metallic Frame FAE2M-EG30SPAS
30” Semi Closed Polymer Arm End Unit, Guest Back, Brushed Nickel Frame FAE2M-EG30SPAN
30” Closed Polymer Arm End Unit, Guest Back, Silver Metallic Frame FAE2M-EG30CPAS
30” Closed Polymer Arm End Unit, Guest Back, Brushed Nickel Frame FAE2M-EG30CPAN
44” Open Polymer Arm End Unit, Guest Back, Silver Metallic Frame FAE2M-EG44OPAS
44” Open Polymer Arm End Unit, Guest Back, Brushed Nickel Frame FAE2M-EG44OPAN
44” Semi Closed Polymer Arm End Unit, Guest Back, Silver Metallic Frame FAE2M-EG44SPAS
44” Semi Closed Polymer Arm End Unit, Guest Back, Brushed Nickel Frame FAE2M-EG44SPAN
44” Closed Polymer Arm End Unit, Guest Back, Silver Metallic Frame FAE2M-EG44CPAS
44” Closed Polymer Arm End Unit, Guest Back, Brushed Nickel Frame FAE2M-EG44CPAN
End
C
E
ORDERING NOTES: Faeron Metal chairs can also be specified with a Wood Arm (WA) or aSolid Surface Arm (SA), replace “PA” in the model number with theArm Style selection below and add the upcharge listed.
Arm Style Option Upcharges $ List
Solid Surface Arm (per pair) - A White 437Solid Surface Arm (per pair) - Gr A Color 456Solid Surface Arm (per pair) - Gr B 492Solid Surface Arm (per pair) - Gr C 517Beech/Palette Wood Arm (per pair) 164
44
914 961 1009 1104 1199 1294 1390 1485 1675
987 1035 1083 1178 1273 1368 1463 1559 1749
1081 1138 1193 1305 1417 1528 1640 1751 1976
1155 1211 1267 1379 1490 1602 1714 1825 2049
1090 1147 1202 1314 1426 1537 1649 1760 1985
1164 1220 1276 1388 1499 1611 1723 1834 2058
1143 1203 1264 1383 1503 1624 1743 1863 2103
1217 1277 1337 1457 1577 1697 1817 1937 2177
1311 1379 1447 1584 1721 1857 1994 2130 2403
1385 1453 1521 1658 1795 1931 2067 2204 2477
1320 1388 1456 1593 1730 1866 2003 2139 2412
1394 1462 1530 1667 1804 1940 2076 2213 2486
August 2019
64 | USA | HEALTHCARE
FAERON METAL | MULTIPLE SEATING - FREESPAN UNITS
COM COM COM COM Height of Width Seat & Fabric Fabric Fabric Overall Overall Overall Seat Arms Between Seat Shipping Back Seat Back Closed Arm Width Depth Height Height from Floor Arms Depth Weight Cube Yardage Yardage Yardage Panel Yardage
PCFG21X2A 46.5 26.3 34.5 19 25.0 43.0 19.5 86 28 3.0 1.5 2.1 0.96PCFP21X2A 46.5 26.3 45.0 19 25.0 43.0 19.5 96 37 3.8 1.5 3.0 0.96PCFG21X3A 68.0 26.3 34.5 19 25.0 64.8 19.5 117 40 4.6 2.4 3.5 0.96PCFP21X3A 68.0 26.3 45.0 19 25.0 64.8 19.5 132 54 5.8 2.4 5.0 0.96PCFG24X2A 52.5 26.3 34.5 19 25.0 49.0 19.5 93 30 3.0 1.5 2.1 0.96PCFP24X2A 52.5 26.3 45.0 19 25.0 49.0 19.5 103 42 3.8 1.5 3.0 0.96PCFG24X3A 77.0 26.3 34.5 19 25.0 73.8 19.5 129 45 4.6 2.4 3.5 0.96PCFP24X3A 77.0 26.3 45.0 19 25.0 73.8 19.5 144 61 5.8 2.4 5.0 0.96
DIMENSIONS & COM REQUIREMENTS
Note: Some vinyls, leathers & upholsteries are not suitable for application on Faeron Metal seating.The approval process is as follows:1. A sample of the COM must be provided to Krug Customer Service prior to or at the time of order. 2. The sample will be reviewed and the customer advised if the fabric is unsuitable.3. The COM fabric or leather will be inspected when received at the factory, to identify any further concerns with its suitability.
Unit COM COM COMWith Fabric Fabric FabricCenter Arm Closed Arm Closed Arm Closed Arm(Continued) Panels ( 2 Arms) Panels ( 3 Arms) Panels ( 4 Arms)
PCF21X2B 0.96 1.44 1.92 PCF21X3B 0.96 1.44 1.92PCF24X2B 0.96 1.44 1.92PCF24X3B 0.96 1.44 1.92
UNIT WITH NO CENTER ARM
UNIT WITH CENTER ARM (CONTINUED), GUEST AND PATIENT BACKS
COM COM COM Height of Width Seat & Fabric Fabric
Overall Overall Overall Seat Arms Between Seat Shipping Back Seat Back Width Depth Height Height from Floor Arms Depth Weight Cube Yardage Yardage Yardage PCFG21X2B 48.3 26.3 34.5 19 25.0 21.5 19.5 95 28 3.0 1.5 2.1 PCFP21X2B 48.3 26.3 45.0 19 25.0 21.5 19.5 105 38 3.8 1.5 3.0PCFG21X3B 71.5 26.3 34.5 19 25.0 21.5 19.5 135 40 4.6 2.4 3.5 PCFP21X3B 71.5 26.3 45.0 19 25.0 21.5 19.5 150 56 5.8 2.4 5.0 PCFG24X2B 54.3 26.3 34.5 19 25.0 24.5 19.5 102 30 3.0 1.5 2.1PCFP24X2B 54.3 26.3 45.0 19 25.0 24.5 19.5 112 43 3.8 1.5 3.0 PCFG24X3B 80.5 26.3 34.5 19 25.0 24.5 19.5 147 45 4.6 2.4 3.5PCFP24X3B 80.5 26.3 45.0 19 25.0 24.5 19.5 162 63 5.8 2.4 5.0
UNIT WITH CENTER ARM
ORDERING NOTES: A drawing showing the configuration of the multiple seating and tables is required with each purchase order. Combination upholstery (more than one upholstery cover within the same unit) is an option on all Faeron Metal upholstered products. When combinationupholstery is with upholstery of the same grade or COM, an upcharge for dual fabrics is $25 list per unit and $49 list per unit for three fabrics. When graded incombination upholstery is selected, use the highest grade upholstery selected or contact Customer Service for a quote -please provide the fabrics specifiedand a description of where each fabric is to be applied on the product in order to obtain a quote.
WEIGHT CAPACITIESFaeron Metal weight capacities are as follows:Guest & Patient Chairs (21” & 24”) - 500 lbs
FEATURES:
For a complete list of features see page 12.
Patient backs are available on multiple units, please change the model number FAE2M-SG to FAE2M-SP and add the following upchargesper back:
Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 921” Chairs $48 57 68 87 105 125 144 164 20224” Chairs $52 62 72 91 111 130 149 168 20730” Chairs $63 73 83 102 121 141 160 180 218
Faeron Option Upcharges $ List $ List $ List
CAL 133 & Moisture Barrier (per yard) 49 Solid Surface Arm (each) - A White 219 Solid Surface Arm (pair) - A White 437Ganging Bracket 44 Solid Surface Arm (each) - Gr A Color 228 Solid Surface Arm (pair) - Gr A Color 456Kinetic Back (not available for Plus) 92 Solid Surface Arm (each) - Gr B 246 Solid Surface Arm (pair) - Gr B 49221” & 24” Under-seat Splashguard 44 Solid Surface Arm (each) - Gr C 259 Solid Surface Arm (pair) - Gr C 517Removeable Seat Covers 68 Beech/Palette Wood Arm (each) 82 Beech/Palette Wood Arm (per pair) 164Removable Back Covers 44
August 2019
HEALTHCARE | USA | 65
FAERONMETAL | MULTIPLE SEATING - FREESPAN UNITS WITHOUT CENTER ARMS
2 Seat - 21” Open Polymer Arm Pre-configured Unit, Guest Backs, Silver Metallic Frame FAE2M-PCFG21X2AOPAS
2 Seat - 21” Open Polymer Arm Pre-configured Unit, Guest Backs, Brushed Nickel FrameAE2M-PCFG21X2AOPAN
2 Seat - 21” Semi Closed Polymer Arm Pre-configured Unit, Guest Backs, Silver Metallic Frame FAE2M-PCFG21X2ASPAS
2 Seat - 21” Semi Closed Polymer Arm Pre-configured Unit, Guest Backs, Brushed Nickel FrameFAE2M-PCFG21X2ASPAN
2 Seat - 21” Closed Polymer Arm Pre-configured Unit, Guest Backs, Silver Metallic FrameFAE2M-PCFG21X2ACPAS
2 Seat - 21” Closed Polymer Arm Pre-configured Unit, Guest Backs, Brushed Nickel FrameFAE2M-PCFG21X2ACPAN
3 Seat - 21” Open Polymer Arm Pre-configured Unit, Guest Backs, Silver Metallic FrameFAE2M-PCFG21X3AOPAS
3 Seat - 21” Open Polymer Arm Pre-configured Unit, Guest Backs, Brushed Nickel FrameFAE2M-PCFG21X3AOPAN
3 Seat - 21” Semi Closed Polymer Arm Pre-configured Unit, Guest Backs, Silver Metallic FrameFAE2M-PCFG21X3ASPAS
3 Seat - 21” Semi Closed Polymer Arm Pre-configured Unit, Guest Backs, Brushed Nickel FrameFAE2M-PCFG21X3ASPAN
3 Seat - 21” Closed Polymer Arm Pre-configured Unit, Guest Backs, Silver Metallic FrameFAE2M-PCFG21X3ACPAS
3 Seat - 21” Closed Polymer Arm Pre-configured Unit, Guest Backs, Brushed Nickel FrameFAE2M-PCFG21X3ACPAN
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL 1 2 3 4 5 6 7 8 9
1282 1348 1414 1546 1679 1812 1944 2076 2341
1429 1496 1562 1694 1826 1959 2092 2224 2489
1578 1661 1743 1909 2075 2240 2406 2571 2902
1725 1808 1891 2057 2222 2388 2553 2719 3049
1587 1670 1752 1918 2084 2249 2415 2580 2911
1734 1817 1900 2066 2231 2397 2562 2728 3058
1761 1860 1959 2158 2357 2556 2754 2953 3350
1909 2008 2107 2306 2505 2704 2902 3101 3497
2057 2174 2289 2521 2752 2984 3216 3448 3911
2205 2321 2436 2669 2900 3132 3363 3596 4059
2066 2183 2298 2530 2761 2993 3225 3457 3920
2214 2330 2445 2678 2909 3141 3372 3605 4068
PRODUCT CODE KEY
Line Series Chair Type Back Type Size Unit Style Arm Type Arm Style Metal Finish
Faeron Chair Pre-Configured Guest Unit with no Open Arm Polymer Arm Silver Metallic Freespan Center Arm Multiple Unit Patient Semi Closed Arm Wood Arm Brushed Unit with Nickel Center Arm Closed Arm Solid Surface Arm
FAE O
S
C
PCF2M PA
WA
SA
S
N
G
P
21X2
21X3
24X2
24X3
A
B
ORDERING NOTES: Faeron Metal chairs can also be specified with a Wood Arm (WA) or aSolid Surface Arm (SA), replace “PA” in the model number with theArm Style selection below and add the upcharge listed.
Arm Style Option Upcharges $ List
Solid Surface Arm (per pair) - A White 437Solid Surface Arm (per pair) - Gr A Color 456Solid Surface Arm (per pair) - Gr B 492Solid Surface Arm (per pair) - Gr C 517Beech/Palette Wood Arm (per pair) 164
August 2019
66 | USA | HEALTHCARE
FAERONMETAL | MULTIPLE SEATING - FREESPAN UNITS WITHOUT CENTER ARMS
PRODUCT CODE KEY
Line Series Chair Type Back Type Size Unit Style Arm Type Arm Style Metal Finish
Faeron Chair Pre-Configured Guest Unit with no Open Arm Polymer Arm Silver Metallic Freespan Center Arm Multiple Unit Patient Semi Closed Arm Wood Arm Brushed Unit with Nickel Center Arm Closed Arm Solid Surface Arm
FAE O
S
C
PCF2M PA
WA
SA
S
N
G
P
21X2
21X3
24X2
24X3
A
B
2 Seat - 24” Open Polymer Arm Pre-configured Unit, Guest Backs, Silver Metallic FrameFAE2M-PCFG24X2AOPAS
2 Seat - 24” Open Polymer Arm Pre-configured Unit, Guest Backs, Brushed Nickel FrameFAE2M-PCFG24X2AOPAN
2 Seat - 24” Semi Closed Polymer Arm Pre-configured Unit, Guest Backs, Silver Metallic FrameFAE2M-PCFG24X2ASPAS
2 Seat - 24” Semi Closed Polymer Arm Pre-configured Unit, Guest Backs, Brushed Nickel FrameFAE2M-PCFG24X2ASPAN
2 Seat - 24” Closed Polymer Arm Pre-configured Unit, Guest Backs, Silver Metallic FrameFAE2M-PCFG24X2ACPAS
2 Seat - 24” Closed Polymer Arm Pre-configured Unit, Guest Backs, Brushed Nickel FrameFAE2M-PCFG24X2ACPAN
3 Seat - 24” Open Polymer Arm Pre-configured Unit, Guest Backs, Silver Metallic FrameFAE2M-PCFG24X3AOPAS
3 Seat - 24” Open Polymer Arm Pre-configured Unit, Guest Backs, Brushed Nickel FrameFAE2M-PCFG24X3AOPAN
3 Seat - 24” Semi Closed Polymer Arm Pre-configured Unit, Guest Backs, Silver Metallic FrameFAE2M-PCFG24X3ASPAS
3 Seat - 24” Semi Closed Polymer Arm Pre-configured Unit, Guest Backs, Brushed Nickel FrameFAE2M-PCFG24X3ASPAN
3 Seat - 24” Closed Polymer Arm Pre-configured Unit, Guest Backs, Silver Metallic FrameFAE2M-PCFG24X3ACPAS
3 Seat - 24” Closed Polymer Arm Pre-configured Unit, Guest Backs, Brushed Nickel FrameFAE2M-PCFG24X3ACPAN
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL 1 2 3 4 5 6 7 8 9
1395 1462 1527 1661 1793 1925 2057 2190 2454
1543 1609 1675 1808 1940 2073 2205 2337 2602
1691 1774 1857 2022 2188 2354 2519 2685 3016
1839 1922 2004 2170 2336 2501 2667 2832 3164
1700 1783 1866 2031 2197 2363 2528 2694 3025
1848 1931 2013 2179 2345 2510 2676 2841 3173
1922 2022 2121 2320 2518 2717 2916 3115 3512
2070 2170 2269 2468 2666 2865 3064 3263 3659
2219 2335 2451 2682 2914 3146 3378 3609 4073
2366 2482 2598 2830 3062 3293 3525 3757 4220
2228 2344 2460 2691 2923 3155 3387 3618 4082
2375 2491 2607 2839 3071 3302 3534 3766 4229
ORDERING NOTES: Faeron Metal chairs can also be specified with a Wood Arm (WA) or aSolid Surface Arm (SA), replace “PA” in the model number with theArm Style selection below and add the upcharge listed.
Arm Style Option Upcharges $ List
Solid Surface Arm (per pair) - A White 437Solid Surface Arm (per pair) - Gr A Color 456Solid Surface Arm (per pair) - Gr B 492Solid Surface Arm (per pair) - Gr C 517Beech/Palette Wood Arm (per pair) 164
August 2019
HEALTHCARE | USA | 67
FAERONMETAL | MULTIPLE SEATING - FREESPAN UNITS WITH CENTER ARMS
2 Seat - 21” Open Polymer Arm Pre-configured Freespan Unit, Guest Backs, Silver Metallic Frame FAE2M-PCFG21X2BOPAS
2 Seat - 21” Open Polymer Arm Pre-configured Freespan Unit, Guest Backs, Brushed Nickel FrameFAE2M-PCFG21X2BOPAN
2 Seat - 21” Semi Closed Polymer Arm Pre-configured Freespan Unit, Guest Backs, Silver Metallic FrameFAE2M-PCFG21X2BSPAS
2 Seat - 21” Semi Closed Polymer Arm Pre-configured Freespan Unit, Guest Backs, Brushed Nickel FrameFAE2M-PCFG21X2BSPAN
2 Seat - 21” Closed Polymer Arm Pre-configured Freespan Unit, Guest Backs, Silver Metallic FrameFAE2M-PCFG21X2BCPAS
2 Seat - 21” Closed Polymer Arm Pre-configured Freespan Unit, Guest Backs, Brushed Nickel FrameFAE2M-PCFG21X2BCPAN
3 Seat - 21” Open Polymer Arm Pre-configured Freespan Unit, Guest Backs, Silver Metallic FrameFAE2M-PCFG21X3BOPAS
3 Seat - 21” Open Polymer Arm Pre-configured Freespan Unit, Guest Backs, Brushed Nickel FrameFAE2M-PCFG21X3BOPAN
3 Seat - 21” Semi Closed Polymer Arm Pre-configured Freespan Unit, Guest Backs, Silver Metallic FrameFAE2M-PCFG21X3BSPAS
3 Seat - 21” Semi Closed Polymer Arm Pre-configured Freespan Unit, Guest Backs, Brushed Nickel FrameFAE2M-PCFG21X3BSPAN
3 Seat - 21” Closed Polymer Arm Pre-configured Freespan Unit, Guest Backs, Silver Metallic FrameFAE2M-PCFG21X3BCPAS
3 Seat - 21” Closed Polymer Arm Pre-configured Freespan Unit, Guest Backs, Brushed Nickel FrameFAE2M-PCFG21X3BCPAN
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL 1 2 3 4 5 6 7 8 9
1642 1708 1774 1907 2039 2172 2304 2436 2701
1863 1930 1995 2129 2261 2393 2525 2658 2922
2106 2197 2288 2470 2652 2834 3016 3198 3562
2327 2418 2509 2691 2874 3056 3237 3419 3784
2124 2215 2306 2488 2670 2852 3034 3216 3580
2345 2436 2527 2709 2892 3074 3255 3437 3802
2335 2435 2534 2732 2931 3129 3328 3527 3924
2630 2730 2829 3028 3227 3425 3623 3822 4219
2966 3099 3231 3496 3761 4026 4290 4555 5085
3262 3394 3526 3791 4056 4321 4586 4850 5380
2993 3126 3258 3523 3788 4053 4317 4582 5112
3289 3421 3553 3818 4083 4348 4613 4877 5407
PRODUCT CODE KEY
Line Series Chair Type Back Type Size Unit Style Arm Type Arm Style Metal Finish
Faeron Chair Pre-Configured Guest Unit with no Open Arm Polymer Arm Silver Metallic Freespan Center Arm Multiple Unit Patient Semi Closed Arm Wood Arm Brushed Unit with Nickel Center Arm Closed Arm Solid Surface Arm
FAE O
S
C
PCF2M PA
WA
SA
S
N
G
P
21X2
21X3
24X2
24X3
A
B
ORDERING NOTES: Faeron Metal chairs can also be specified with a Wood Arm (WA) or aSolid Surface Arm (SA), replace “PA” in the model number with theArm Style selection below and add the upcharge listed.
Arm Style Option Upcharges $ List
Solid Surface Arm (per pair) - A White 437Solid Surface Arm (per pair) - Gr A Color 456Solid Surface Arm (per pair) - Gr B 492Solid Surface Arm (per pair) - Gr C 517Beech/Palette Wood Arm (per pair) 164
August 2019
68 | USA | HEALTHCARE
FAERONMETAL | MULTIPLE SEATING - FREESPAN UNITS WITH CENTER ARMS
PRODUCT CODE KEY
Line Series Chair Type Back Type Size Unit Style Arm Type Arm Style Metal Finish
Faeron Chair Pre-Configured Guest Unit with no Open Arm Polymer Arm Silver Metallic Freespan Center Arm Multiple Unit Patient Semi Closed Arm Wood Arm Brushed Unit with Nickel Center Arm Closed Arm Solid Surface Arm
FAE O
S
C
PCF2M PA
WA
SA
S
N
G
P
21X2
21X3
24X2
24X3
A
B
2 Seat - 24” Open Polymer Arm Pre-configured Freespan Unit, Guest Backs, Silver Metallic FrameFAE2M-PCFG24X2BOPAS
2 Seat - 24” Open Polymer Arm Pre-configured Freespan Unit, Guest Backs, Brushed Nickel FrameFAE2M-PCFG24X2BOPAN
2 Seat - 24” Semi Closed Polymer Arm Pre-configured Freespan Unit, Guest Backs, Silver Metallic FrameFAE2M-PCFG24X2BSPAS
2 Seat - 24” Semi Closed Polymer Arm Pre-configured Freespan Unit, Guest Backs, Brushed Nickel FrameFAE2M-PCFG24X2BSPAN
2 Seat - 24” Closed Polymer Arm Pre-configured Freespan Unit, Guest Backs, Silver Metallic FrameFAE2M-PCFG24X2BCPAS
2 Seat - 24” Closed Polymer Arm Pre-configured Freespan Unit, Guest Backs, Brushed Nickel FrameFAE2M-PCFG24X2BCPAN
3 Seat - 24” Open Polymer Arm Pre-configured Freespan Unit, Guest Backs, Silver Metallic FrameFAE2M-PCFG24X3BOPAS
3 Seat - 24” Open Polymer Arm Pre-configured Freespan Unit, Guest Backs, Brushed Nickel FrameFAE2M-PCFG24X3BOPAN
3 Seat - 24” Semi Closed Polymer Arm Pre-configured Freespan Unit, Guest Backs, Silver Metallic FrameFAE2M-PCFG24X3BSPAS
3 Seat - 24” Semi Closed Polymer Arm Pre-configured Freespan Unit, Guest Backs, Brushed Nickel FrameFAE2M-PCFG24X3BSPAN
3 Seat - 24” Closed Polymer Arm Pre-configured Freespan Unit, Guest Backs, Silver Metallic FrameFAE2M-PCFG24X3BCPAS
3 Seat - 24” Closed Polymer Arm Pre-configured Freespan Unit, Guest Backs, Brushed Nickel FrameFAE2M-PCFG24X3BCPAN
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL 1 2 3 4 5 6 7 8 9
1756 1822 1888 2021 2153 2285 2417 2550 2815
1977 2043 2110 2242 2374 2507 2639 2771 3037
2219 2310 2401 2584 2766 2948 3129 3312 3676
2441 2532 2623 2805 2987 3169 3351 3533 3897
2237 2328 2419 2602 2784 2966 3147 3330 3694
2459 2550 2641 2823 3005 3187 3369 3551 3915
2497 2596 2696 2894 3092 3291 3490 3688 4086
2792 2891 2991 3189 3388 3587 3785 3983 4381
3128 3261 3393 3658 3922 4188 4452 4717 5247
3424 3556 3688 3953 4217 4483 4748 5012 5542
3155 3288 3420 3685 3949 4215 4479 4744 5274
3451 3583 3715 3980 4244 4510 4775 5039 5569
ORDERING NOTES: Faeron Metal chairs can also be specified with a Wood Arm (WA) or aSolid Surface Arm (SA), replace “PA” in the model number with theArm Style selection below and add the upcharge listed.
Arm Style Option Upcharges $ List
Solid Surface Arm (per pair) - A White 437Solid Surface Arm (per pair) - Gr A Color 456Solid Surface Arm (per pair) - Gr B 492Solid Surface Arm (per pair) - Gr C 517Beech/Palette Wood Arm (per pair) 164
August 2019
HEALTHCARE | USA | 69
FAERON METAL | LEED CI CREDIT SUMMARY
Faeron Metal Easy Access
PRE-CONSUMERRECYCLED CONTENT = 12.74%
POST-CONSUMERRECYCLED CONTENT =17.81%
Up to 56.6% of this Faeron Metalproduct is recyclable at the end of itsuseful life.
level® CERTIFICATION, AIR EMISSIONS AND FSC® CERTIFICATION
MATERIAL CONTENT:
level® CERTIFICATIONBIFMA’s e3 Furniture Sustainability Standard is a voluntary, multi-attribute standard that measures the degreeof sustainability of furniture. This standard evaluates product and company environmental attributes andcompliance systems in a wide range of elements which include Materials, Energy & Atmosphere, Human &Ecosystem Health and Social Responsibility. Faeron Metal products have earned level®, BIFMA‘s sustainabilitycertification program for furniture, certification through third-party verification against the e3 standard.
AIR-EMISSIONSAll Faeron Metal products are supplied with air-emissions certified materials. Contact customer service forinformation.
FSC®
In 2005, Krug received Forest Stewardship Council® (FSC®) Chain-of-Custody certification for our manufacturingfacilities. The FSC® Chain-of-Custody tracks certified wood from seedling to final sale. It signifies that thegrowth, harvesting and production of goods are entirely achieved through responsible forestry, which guaranteesa healthy supply of forest resources for generations to come.
Architects, designers, and building professionals can specify FSC®-certified products in order to achieve apoint from the US. Green Building Council's Leadership in Energy and Environmental Design (LEED) RatingSystem.
6% Fabric
14% Plywood
16% Urethane Foam
49% Steel
6% Plastic
7% Cardboard
2% Steel Seat Springs
CONTRIBUTES TO
CREDIT 2.1 - 2.2 Construction Waste Management 1-2 point(s)
CREDIT 3.3 Resource Reuse 1 point
CREDIT 4.1 Recycled Content 1 point
CREDIT 4.2 Recycled Content 1 point
CREDIT 4.5 Low Emitting Materials,
Systems & Seating 1 point
CREDIT 5.1 Regional Materials* 1 point
CREDIT 7 Certified Wood 1 point(s)(MUST BE REQUESTED)
*This credit is only applicable if in total 20% of the combined value of the procurement of construction materials and in the furniture are manufactured within a radius of 500 miles. This credit will apply if the installation of the finished product occurs within 500 miles of Kitchener, Ontario.
August 2019
70 | USA | HEALTHCARE
DIMENSIONS
Height of WidthOverall Overall Overall Seat Arms from Footrest Between Seat ShippingWidth Depth Height Height Floor Height Arms Depth Weight Cubes
21” Guest 25.0 29.75 40.0 25.0 30.5 6.75 21 19.5 70 2124” Guest 28.0 29.75 40.0 25.0 30.5 6.75 24 19.5 74 26
21” Patient 25.0 29.75 50.5 25.0 30.5 6.75 21 19.5 75 2624” Patient 28.0 29.75 50.5 25.0 30.5 6.75 24 19.5 80 30
COM YARDAGES
COM Yardage COM Yardage COM Yardage COM YardageSeat Only Back Only Seat & Back Closed Arm
21” & 24” Guest - One Chair 0.9 1.4 1.6 0.96
21” & 24” Patient - One Chair 0.9 2.0 2.0 0.96
FAERON METAL | EASY ACCESS CHAIR
ORDERING NOTES: A drawing showing the configuration of the multiple seating and tables is required with each purchase order. Combination upholstery (more than one upholstery cover within the same unit) is an option on all Faeron Metal upholstered products. When combinationupholstery is with upholstery of the same grade or COM, an upcharge for dual fabrics is $26 list per unit and $46 list per unit for three fabrics. When graded incombination upholstery is selected, use the highest grade upholstery selected or contact Customer Service for a quote -please provide the fabrics specifiedand a description of where each fabric is to be applied on the product in order to obtain a quote.
WEIGHT CAPACITIESFaeron Metal weight capacities are as follows:Guest & Patient Chairs (21” & 24”) - 500 lbs
FEATURES:
For a complete list of features see page 12.
Faeron Metal Option Upcharges $ List $ List
CAL 133 & Moisture Barrier (per yard) 49 Solid Surface Arm (per pair) - A White 437Ganging Bracket 44 Solid Surface Arm (per pair) - Gr A Color 456Kinetic Back (not available for Plus) 92 Solid Surface Arm (per pair) - Gr B 49221” & 24” Under-seat Splashguard 44 Solid Surface Arm (per pair) - Gr C 517Removeable Seat Covers 68 Beech/Palette Wood Arm (per pair) 164Removable Back Covers 44
Patient backs are available on Easy Access chairs, please change the model number FAE2M-HG to FAE2M-HP and add the followingupcharges per back:
Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 921” Chairs $48 57 68 87 105 125 144 164 20224” Chairs $52 62 72 91 111 130 149 168 207
August 2019
HEALTHCARE | USA | 71
FAERON METAL | EASY ACCESS CHAIR
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL 1 2 3 4 5 6 7 8 9
1157 1190 1222 1288 1354 1420 1486 1552 1683
1532 1565 1598 1663 1729 1796 1861 1927 2058
1453 1502 1552 1651 1750 1849 1948 2047 2245
1828 1877 1927 2026 2125 2224 2323 2422 2620
1462 1511 1561 1660 1759 1858 1957 2056 2254
1837 1886 1936 2035 2134 2233 2332 2431 2629
1178 1211 1245 1310 1376 1442 1508 1573 1706
1562 1595 1628 1694 1760 1825 1891 1957 2089
1474 1524 1573 1672 1771 1870 1969 2068 2266
1858 1907 1957 2056 2155 2254 2353 2452 2650
1483 1533 1582 1681 1780 1879 1978 2077 2275
1867 1916 1966 2065 2164 2263 2362 2461 2659
PRODUCT CODE KEY
Line Series Chair Type Size Arm Type Arm Style Metal Finish
Faeron Chair Easy Access Guest Chair Open Arm Polymer Arm Silver Metallic
Easy Access Patient Chair Semi Closed Arm Wood Arm Brushed Nickel
Closed Arm Solid Surface Arm
FAE 21
24
O
S
21” Open Polymer Arm, Silver Metallic FrameFAE2M-HG21OPAS
21” Open Polymer Arm, Brushed Nickel FrameFAE2M-HG21OPAN
21” Semi Closed Polymer Arm, Silver Metallic FrameFAE2M-HG21SPAS
21” Semi Closed Polymer Arm, Brushed Nickel FrameFAE2M-HG21SPAN
21” Closed Polymer Arm, Silver Metallic FrameFAE2M-HG21CPAS
21” Closed Polymer Arm, Brushed Nickel FrameFAE2M-HG21CPAN
24” Open Polymer Arm, Silver Metallic FrameFAE2M-HG24OPAS
24” Open Polymer Arm, Brushed Nickel FrameFAE2M-HG24OPAN
24” Semi Closed Polymer Arm, Silver Metallic FrameFAE2M-HG24SPAS
24” Semi Closed Polymer Arm, Brushed Nickel FrameFAE2M-HG24SPAN
24” Closed Polymer Arm, Silver Metallic FrameFAE2M-HG24CPAS
24” Closed Polymer Arm, Brushed Nickel FrameFAE2M-HG24CPAN
C
HG2M PA
WA
SA
S
NHP
ORDERING NOTES: Faeron Metal chairs can also be specified with a Wood Arm (WA) or aSolid Surface Arm (SA), replace “PA” in the model number with theArm Style selection below and add the upcharge listed.
Arm Style Option Upcharges $ List
Solid Surface Arm (per pair) - A White 437Solid Surface Arm (per pair) - Gr A Color 456Solid Surface Arm (per pair) - Gr B 492Solid Surface Arm (per pair) - Gr C 517Beech/Palette Wood Arm (per pair) 164
August 2019
72 | USA | HEALTHCARE
FAERON METAL | LEED CI CREDIT SUMMARY
Faeron Metal Tables
PRE-CONSUMERRECYCLED CONTENT = 67.26%
POST-CONSUMERRECYCLED CONTENT =17.02%
Up to 40.48% of this Faeron Metalproduct is recyclable at the end of itsuseful life.
level® CERTIFICATION, AIR EMISSIONS AND FSC® CERTIFICATION
MATERIAL CONTENT:
level® CERTIFICATIONBIFMA’s e3 Furniture Sustainability Standard is a voluntary, multi-attribute standard that measures the degreeof sustainability of furniture. This standard evaluates product and company environmental attributes andcompliance systems in a wide range of elements which include Materials, Energy & Atmosphere, Human &Ecosystem Health and Social Responsibility. Faeron Metal products have earned level®, BIFMA‘s sustainabilitycertification program for furniture, certification through third-party verification against the e3 standard.
AIR-EMISSIONSAll Faeron Metal products are supplied with air-emissions certified materials. Contact customer service forinformation.
FSC®
In 2005, Krug received Forest Stewardship Council® (FSC®) Chain-of-Custody certification for our manufacturingfacilities. The FSC® Chain-of-Custody tracks certified wood from seedling to final sale. It signifies that thegrowth, harvesting and production of goods are entirely achieved through responsible forestry, which guaranteesa healthy supply of forest resources for generations to come.
Architects, designers, and building professionals can specify FSC®-certified products in order to achieve apoint from the US. Green Building Council's Leadership in Energy and Environmental Design (LEED) RatingSystem.
57% Particle Board
29% Steel
12% Cardboard
2% Hardwood Veneer
CONTRIBUTES TO
CREDIT 2.1 - 2.2 Construction Waste Management 1-2 point(s)
CREDIT 3.3 Resource Reuse 1 point
CREDIT 4.1 Recycled Content 1 point
CREDIT 4.2 Recycled Content 1 point
CREDIT 4.5 Low Emitting Materials,
Systems & Seating 1 point
CREDIT 5.1 Regional Materials* 1 point
CREDIT 7 Certified Wood 1 point(s)(MUST BE REQUESTED)
*This credit is only applicable if in total 20% of the combined value of the procurement of construction materials and in the furniture are manufactured within a radius of 500 miles. This credit will apply if the installation of the finished product occurs within 500 miles of Kitchener, Ontario.
August 2019
HEALTHCARE | USA | 73
Center Square Table FAE4-LKI-22-22
End Square Table, Silver Metallic Frame FAE4-MLKE-22-22S
End Square Table, Brushed Nickel Frame FAE4-MLKE-22-22N
Linking Curved Corner Table 45o
FAE4-LKCRF45
Linking Curved Corner Table 90o
FAE4-LKCRF90
Linking Square Corner Table 90o, Silver Metallic Frame FAE4-MLKCSF90S
Linking Square Corner Table 90o, Brushed Nickel Frame FAE4-MLKCSF90N
FAERON METAL | LINKING TABLES
Solid Surface Solid Surface Solid Surface Solid SurfaceLaminate with top Grade top Grade top top
DESCRIPTION/MODEL Beech Polymer Edge A - White A - Color Grade B Grade C
22 22 - 23 1.5
22 22 16 39 1.5
28 24 16 27 2.2
38 24 16 32 2.2
30 30 16 45 2.2
DIMENSIONSModel Width Depth Height Shipping Weight Cubes
Center Square Table FAE4-LKI-22-22
End Square Table FAE4-MLKE-22-22
Linking Curved Corner Table 45o
FAE4-LKCRF45
Linking Curved Corner Table 90o
FAE4-LKCRF90
Linking Square Corner Table 90o
FAE4-MLKCSF90
515 358 613 647 714 761
613 428 712 914 820 869
647 461 745 781 853 903
572 376 755 794 872 925
709 498 892 945 1051 1123
752 518 959 1013 1121 1195
940 536 977 1031 1139 1212
August 2019
74 | USA | HEALTHCARE
FRAME FINISHFaeron Metal table frames are available inKrug Sliver Metallic or Brushed Nickel.
STANDARD FINISHESFor a complete list of standard wood finishes,please see page 4. Faeron tables areavailable in 22 standard finishes.
LAMINATE AND POLYMER EDGEFaeron tables are available in laminates withwood or laminates with Polymer edge.See page 4 for laminate information.
FAERON METAL | FREE STANDING TABLES
Round Tables, Silver Metallic Frame FAE4-M22D-21S FAE4-M30D-16SFAE4-M44D-16S
Round Tables, Brushed Nickel Frame FAE4-M22D-21N FAE4-M30D-16NFAE4-M44D-16N
Elliptical, Silver Metallic Frame FAE4-ME44-22-16S
Elliptical, Brushed Nickel Frame FAE4-ME44-22-16N
Square Tables, Silver Metallic FrameFAE4-M22-22-21SFAE4-M30-30-16SFAE4-M44-44-16S
Square Tables, Brushed Nickel FrameFAE4-M22-22-21NFAE4-M30-30-16NFAE4-M44-44-16N
Rectangular Table, Silver Metallic Frame FAE4-M44-22-16S
Rectangular Table, Brushed Nickel Frame FAE4-M44-22-16N
Solid Surface Solid Surface Solid Surface Solid SurfaceLaminate with top Grade top Grade top top
DESCRIPTION/MODEL Beech Polymer Edge A - White A - Color Grade B Grade C
Round Tables FAE4-M22D-21 FAE4-M30D-16FAE4-M44D-16
Elliptical FAE4-ME44-22-16
Square TablesFAE4-M22-22-21FAE4-M30-30-16FAE4-M44-44-16
Rectangular Table FAE4-M44-22-16
DIMENSIONS
22” Diameter 21 30 830” Diameter 16 42 1144” Diameter 16 72 21
44 22 16 42 12
22 22 21 32 8
30 30 16 47 11
44 44 16 83 21
44 22 16 47 12
Model Width Depth Height Shipping Weight Cubes
862 618 1308 1406 1490 1643932 655 1487 1600 1751 19751754 1225 2659 2859 3137 3537
986 742 1431 1529 1613 17661056 779 1610 1724 1875 20982026 1497 2930 3131 3408 3809
1047 716 1622 1748 1920 2170
1293 963 1868 1994 2166 2417
852 611 1245 1337 1427 1581952 671 1499 1615 1797 20481795 1254 2717 2922 3205 3614
976 734 1368 1461 1551 17051076 794 1623 1738 1921 21712066 1526 2989 3194 3477 3885
1061 727 1631 1757 1931 2184
1308 974 1877 2003 2178 2431
August 2019
HEALTHCARE | USA | 75
FAERON LOUNGE | LEED CI CREDIT SUMMARY
Faeron Lounge
12% Particle Board
9.33% Cardboard
10.67% Hardwood4% Softwood
36% Plywood
17.33% Urethane Foam
8% Fabric
2.67% Steel seat springs
level® CERTIFICATIONBIFMA’s e3 Furniture Sustainability Standard is a voluntary, multi-attribute standard that measures the degreeof sustainability of furniture. This standard evaluates product and company environmental attributes andcompliance systems in a wide range of elements which include Materials, Energy & Atmosphere, Human &Ecosystem Health and Social Responsibility. Faeron products have earned level®, BIFMA‘s sustainabilitycertification program for furniture, certification through third-party verification against the e3 standard.
AIR-EMISSIONSAll Faeron products are supplied air-emissions certified. Contact customer service for information.
FSC®
In 2005, Krug received Forest Stewardship Council® (FSC®) Chain-of-Custody certification for our manufacturingfacilities. The FSC® Chain-of-Custody tracks certified wood from seedling to final sale. It signifies that thegrowth, harvesting and production of goods are entirely achieved through responsible forestry, which guarantees a healthy supply of forest resources for generations to come.Contact customer service for further information, pricing and leadtimes.
Architects, designers, and building professionals can specify FSC®-certified products in order to achieve apoint from the US. Green Building Council's Leadership in Energy and Environmental Design (LEED) RatingSystem.
level® CERTIFICATION & AIR-EMISSIONS CERTIFICATION
PRE-CONSUMERRECYCLED CONTENT = 12.67%
POST-CONSUMERRECYCLED CONTENT =9.40%
Up to 18.93% of this Faeron product is recyclable at the end of its useful life.
MATERIAL CONTENT:
CONTRIBUTES TO
CREDIT 2.1 - 2.2 Construction Waste Management 1-2 point(s)
CREDIT 3.3 Resource Reuse 1 point
CREDIT 4.1 Recycled Content 1 point
CREDIT 4.5 Low Emitting Materials,
Systems & Seating 1 point
CREDIT 5.1 Regional Materials* 1 point
CREDIT 7 Certified Wood 1 point(s)(MUST BE REQUESTED)
*This credit is only applicable if in total 20% of the combined value of the procurement of construction materials and in the furniture are manufactured within a radius of 500 miles. This credit will apply if the installation of the finished product occurs within 500 miles of Kitchener, Ontario.
August 2019
76 | USA | HEALTHCARE
FAERON LOUNGE | DIMENSIONS & COM
DIMENSIONS & COM REQUIREMENTS
ORDERING NOTES:
CONTRASTING BACKS, SEATS & CLOSED ARMS Combination upholstery (more than one upholstery cover within the same unit) is an option on all Faeron upholstered products. When combination upholsteryis with upholstery of the same grade or COM, an upcharge for dual fabrics is $25 list per unit and $49 list per unit for three fabrics. When graded in combinationupholstery is selected, use the highest grade upholstery selected or contact Customer Service for a quote -please provide the fabrics specified and a descriptionof where each fabric is to be applied on the product in order to obtain a quote. Note: Some vinyls, leathers & upholsteries are not suitable for application onFaeron seating. Please refer to page 9 for C.O.M approval process.
WEIGHT CAPACITIES Faeron weight capacities are as follows:One -Seat - 500 lbsOne -Seat - Plus - 750 lbsOne-seat Wide - 500 lbsOne-seat Wide Plus - 750 lbsTwo- Seat - 625 lbsTwo- Seat Plus- 975 lbsThree - Seat - 850 lbsThree - Seat Plus- 1200 lbs
Faeron Option Upcharges $ List $ List
CAL 133 & Moisture Barrier (per yard) 49 Solid Surface Arm Cap (per pair) - A White 293One-Seat Removable Back Covers 116 Solid Surface Arm Cap (per pair) - Gr A Color 303One-Seat Plus Removable Back Covers 174 Solid Surface Arm Cap (per pair) - Gr B 321Two-Seat Removable Back Covers 230 Solid Surface Arm Cap (per pair) - Gr C 332Three-Seat Removable Back Covers 345 Solid Surface Arm (per pair) - A White 517One-Seat Removable Seat Covers 116 Solid Surface Arm (per pair) - Gr A Color 540One-Seat Plus Removable Seat Covers 174 Solid Surface Arm (per pair) - Gr B 586Two-Seat Removable Seat Covers 230 Solid Surface Arm (per pair) - Gr C 618Three-Seat Removable Seat Covers 345 Urethane Arm Cap (per pair) 116
Upholstered Lounge Wood Arm Cap (per pair) 147
COM COM COM COMHeight of Width Yardage Yardage Yardage Yardage
Overall Overall Overall Seat Arms from Between Seat Shipping Entire Seat Back ArmWidth Depth Height Height Floor Arms Depth Weight Cube Unit Only Only Only
One-seat - wood armlow back 27 28.5 31.5 17.8 24 23 21 55 20 2.5 1.3 1.7 1.2high back 27 28.5 41.5 17.8 24 23 21 59 24 2.7 1.3 2.3 1.2One-seat - armlesslow back 23 28.5 31.5 17.8 - - 21 52 20 2.5 1.3 1.7 -high back 23 28.5 41.5 17.8 - - 21 55 24 2.7 1.3 2.3 -One-seat - upholstered armlow back 28 28.5 31.5 17.8 24 23 21 75 20 5.4 1.3 1.7 2.9high back 28 28.5 41.5 17.8 24 23 21 79 24 5.6 1.3 2.3 2.9wingback 32 28.5 42.5 17.8 24 23 21 84 27 6.6 1.3 3.3 2.9
One-seat plus - wood armlow back 34 28.5 31.5 17.8 24 30 21 64 23 3.4 1.5 1.7 1.2high back 34 28.5 41.5 17.8 24 30 21 68 27 4 1.5 2.3 1.2One-seat plus - armlesslow back 30 28.5 31.5 17.8 - - 21 61 23 3.4 1.5 1.7 -high back 30 28.5 41.5 17.8 - - 21 65 27 4 1.5 2.3 -One-seat plus - upholstered armlow back 35 28.5 31.5 17.8 24 30 21 84 23 6.3 1.5 1.7 2.9high back 35 28.5 41.5 17.8 24 30 21 88 27 6.9 1.5 2.3 2.9wingback 39 28.5 42.5 17.8 24 30 21 93 30 7.9 1.3 3.3 2.9
Two-seat - wood armlow back 50 28.5 31.5 17.8 24 46 21 88 36 4.3 1.7 2.6 1.2high back 50 28.5 41.5 17.8 24 46 21 95 43 5.3 1.7 3.5 1.2Two-seat - armlesslow back 46 28.5 31.5 17.8 - - 21 87 36 4.3 1.7 2.6 -high back 46 28.5 41.5 17.8 - - 21 94 43 5.3 1.7 3.5 -Two-seat - upholstered armlow back 51 28.5 31.5 17.8 24 46 21 108 36 7.2 1.7 2.6 2.9high back 51 28.5 41.5 17.8 24 46 21 115 43 8.2 1.7 3.5 2.9wingback 55 28.5 42.5 17.8 24 46 21 120 46 9.2 1.7 4.5 2.9
Three-seat - wood armlow back 73 28.5 31.5 17.8 24 69 21 130 52 6 2.5 3.4 1.2high back 73 28.5 41.5 17.8 24 69 21 130 61 7.2 2.5 4.7 1.2Three-seat - armlesslow back 69 28.5 31.5 17.8 - - 21 122 52 6 2.5 3.4 -high back 69 28.5 41.5 17.8 - - 21 122 61 7.2 2.5 4.7 -Three-seat - upholstered armlow back 74 28.5 31.5 17.8 24 69 21 140 52 8.9 2.5 3.4 2.9high back 74 28.5 41.5 17.8 24 69 21 140 61 10.1 2.5 4.7 2.9wingback 78 28.5 42.5 17.8 24 69 21 145 64 11.1 1.7 5.7 2.9
August 2019
HEALTHCARE | USA | 77
FAERON LOUNGE | FEATURES & OPTIONS
WOOD ARMFaeron Wood Arm Lounge chairs are availablewith optional Arm Caps in Urethane and SolidSurface. As well as a Solid Surface Arm.
ARMLESSFaeron Armless Lounge seating can bespecified with a full wood base providing anenhanced base profile.
UPHOLSTERED ARM Faeron Upholstered arm lounge chairs areavailable with optional arm caps in Wood,Solid Surface and Urethane (Wingbacklounge is not available with Urethane cap).
ARM PANELArm Panels are available on Faeron WoodArm Lounge seating in semi and fully closedstyles for optimum design flexibility.
BEECH WOOD LEGSFaeron Lounge legs and bases are solidBeech available in 22 finish selections.
METAL LEGSFaeron Upholstered Arm models are alsoavailable with Metal Legs; Silver Metallic orBrushed Nickle finish.
WALL SAVERAll Faeron Lounge low back models featurea wall saver feature in which the angle of theback and the rear legs are designed to keepthe back away from the wall, to prevent wearand damage to both the chairs
CLEAN OUTAll Faeron Lounge seating has a built-in cleanout feature: a space at the back of the seatthat allows dirt, debris and liquid to fall to thefloor for easy clean up and maintenance - designed so that it does not detract from thecomfort or appearance of the product.
OPTIONSURETHANE ARM CAPThe optional Urethane Arm Cap is available onWood Arm Lounge and Upholstered ArmLounge (with the exception of WingbackLounge) and provides enhanced durability andprotection for the arms. This is field replaceableif this becomes damaged or degraded and isavailable in three colors; Black, Grey and Taupe.
WOOD ARM CAPThe optional Solid Beech Arm Cap is availableon Upholstered Arm and Wingback Lounge.This is field replaceable if this becomesdamaged or degraded.
SOLID SURFACE ARM CAPThe optional Solid Surface Arm Cap is availableon Wood Arm Lounge and Upholstered ArmLounge and provides enhanced durability,protection and cleanability for the arms. This isfield replaceable if this becomes damaged ordegraded and is available in 8 standard colors.
SOLID SURFACE ARM The optional Solid Surface Arm is available onWood Arm Lounge and provides a fully seam-less armrest for enhanced durability, protectionand cleanability. It is available in 8 standardcolors and replaceable as a full side frame if itbecomes damaged or degraded.
COMBINATION UPHOLSTERYWhen combination upholstery (more than oneupholstery cover within the same unit) isspecified with upholstery of the same grade orCOM, an upcharge for dual fabrics is $25 listper unit and $49 list per unit for three fabrics.When graded-in combination upholstery isselected, use the highest grade upholsteryselected or contact Customer Service for a quote
MOISTURE BARRIER & CAL 133California Technical Bulletin 133 is a flammabilitytest for seating. Krug offers a compliance method,in combination with non- flammable upholsterycovers, that may enable products to meetcertification requirements for this test. Thisprocess at the same time also provides theproducts with a Moisture Barrier - a treatment thathelps to prevent the passage of liquids andmoisture to inside of the uphostered components- thereby conferring sanitary and anti-infectionbenefits. So when CAL133 is specified, theproduct also automatically has a Moisture Barrier,and when a Moisture Barrier is specified, theproduct also features the compliance method andlow flammability features of CAL 133. Theapplication of this up-charge and the compliancemethod does not mean that the specificconfiguration of product and upholstery cover aretested and officially certified as being CAL133compliant. If the official certification is required,Krug will provide this (through an independentcertified testing laboratory) at a charge of $772 peritem, plus the cost of the product to be tested.Lead time for certification testing is typically 4-8weeks. Moisture Barrier & CAL 133 is availablefor an upcharge of $49 list per yard.
REMOVABLE AND REPLACEABLE COVERSFaeron Lounge Chairs are available with aRemovable Seat & Back Covers. See page 76 for upcharges.
August 2019
78 | USA | HEALTHCARE
One-Seat, Armless, Low back, Standard Base FAE3-AL1S Beech
One-Seat Plus, Armless, Low back, Standard Base FAE3-ALB1S Beech
One-Seat, Armless, Low back, with Full Wood Base FAE3-AL1F Beech
One-Seat Plus, Armless, Low back, with Full Wood Base FAE3-ALB1F Beech
One-Seat Wide, Armless, Low back, Standard Base FAE3-AL1+S Beech
One-Seat Wide Plus, Armless, Low back, Standard Base FAE3-ALB1+S Beech
One-Seat Wide, Armless, Low back, with Full Wood BaseFAE3-AL1+F Beech
One-Seat Wide Plus, Armless, Low back, with Full Wood BaseFAE3-ALB1+F Beech
Two-Seat, Armless, Low back, Standard Base FAE3-AL2S Beech
Two-Seat Plus, Armless, Low back, Standard BaseFAE3-ALB2S Beech
Two-Seat, Armless, Low back, with Full Wood Base FAE3-AL2F Beech
Two-Seat Plus, Armless, Low back, with Full Wood BaseFAE3-ALB2F Beech
Three-Seat, Armless, Low back, Standard Base FAE3-AL3S Beech
Three-Seat Plus, Armless, Low back, Standard BaseFAE3-ALB3S Beech
Three-Seat, Armless, Low back, with Full Wood Base FAE3-AL3F Beech
Three-Seat Plus, Armless, Low back, with Full Wood BaseFAE3-ALB3F Beech
Line Series Chair Type Size Arm Type
Faeron Lounge Seating Low Back One-Seat One-Seat Plus Standard Base
High Back One-Seat Wide One-Seat Wide Plus Full Wood Base Two-Seat Two-Seat Plus
Three-Seat Three-Seat Plus
FAE 3-A 1
2
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL Species 1 2 3 4 5 6 7 8 9
PRODUCT CODE KEY
3
B1+
B2
B3
L
H
S
1386 1440 1495 1603 1712 1820 1929 2037 2255
1438 1493 1546 1655 1763 1873 1981 2090 2307
1510 1565 1619 1728 1836 1945 2053 2162 2380
1562 1616 1671 1779 1888 1997 2106 2214 2431
1566 1641 1714 1862 2010 2157 2305 2453 2748
1623 1696 1771 1918 2066 2214 2361 2509 2804
1727 1800 1874 2022 2170 2317 2465 2613 2908
1782 1856 1930 2077 2225 2373 2520 2669 2964
1964 2045 2127 2289 2452 2615 2779 2942 3267
2043 2125 2207 2369 2532 2695 2858 3020 3347
2189 2270 2351 2514 2677 2840 3003 3166 3492
2267 2349 2430 2594 2757 2919 3082 3245 3572
2602 2733 2863 3124 3385 3645 3906 4167 4688
2736 2866 2996 3258 3518 3778 4039 4300 4821
2898 3029 3159 3419 3681 3941 4202 4462 4984
3032 3162 3292 3553 3813 4074 4335 4595 5117
1+
B1
FAERON LOUNGE | ARMLESS, LOW BACK LOUNGE
F
August 2019
HEALTHCARE | USA | 79
One-Seat, Armless, High back, Standard Base FAE3-AH1S Beech
One-Seat Plus, Armless, High back, Standard BaseFAE3-AHB1S Beech
One-Seat, Armless, High back, with Full Wood Base FAE3-AH1F Beech
One-Seat Plus, Armless, High, with Full Wood BaseFAE3-AHB1F Beech
One-Seat Wide, Armless, High back, Standard BaseFAE3-AH1+S Beech
One-Seat Wide Plus, Armless, High back, Standard BaseFAE3-AHB1+S Beech
One-Seat Wide, Armless, High back, with Full Wood BaseFAE3-AH1+F Beech
One-Seat Wide Plus, Armless, High back, with Full Wood BaseFAE3-AHB1+F Beech
Two-Seat, Armless, High back, Standard Base FAE3-AH2S Beech
Two-Seat Plus, Armless, High back, Standard BaseFAE3-AHB2S Beech
Two-Seat, Armless, High back, with Full Wood Base FAE3-AH2F Beech
Two-Seat Plus, Armless, High back, with Full Wood BaseFAE3-AHB2F Beech
Three-Seat, Armless, High back, Standard Base FAE3-AH3S Beech
Three-Seat Plus, Armless, High back, Standard BaseFAE3-AHB3S Beech
Three-Seat, Armless, High back, with Full Wood Base FAE3-AH3F Beech
Three-Seat Plus, Armless, with Full Wood BaseFAE3-AHB3F Beech
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL Species 1 2 3 4 5 6 7 8 9
1558 1624 1690 1822 1956 2088 2221 2354 2619
1609 1675 1742 1875 2007 2140 2273 2406 2672
1682 1748 1815 1947 2079 2213 2345 2478 2744
1734 1800 1866 1999 2132 2264 2398 2530 2796
1750 1836 1922 2094 2265 2438 2610 2781 3125
1806 1892 1978 2150 2322 2493 2665 2838 3181
1909 1995 2082 2254 2425 2597 2769 2940 3285
1966 2052 2137 2309 2482 2653 2825 2997 3341
2091 2186 2279 2466 2653 2840 3027 3213 3588
2171 2264 2358 2545 2733 2919 3106 3293 3667
2316 2410 2504 2691 2877 3064 3251 3438 3813
2396 2489 2582 2769 2957 3144 3331 3518 3892
2780 2934 3089 3398 3707 4016 4324 4634 5252
2913 3068 3222 3531 3840 4149 4458 4766 5385
3076 3230 3385 3693 4002 4312 4620 4929 5548
3208 3364 3518 3827 4135 4444 4754 5063 5680
FAERON LOUNGE | ARMLESS, HIGH BACK LOUNGE
Line Series Chair Type Size Base Type
Faeron Lounge Seating Low Back One-Seat One-Seat Plus Standard Base
High Back One-Seat Wide One-Seat Wide Plus Full Wood Base Two-Seat Two-Seat Plus
Three-Seat Three-Seat Plus
FAE 3-A 1
2
PRODUCT CODE KEY
3
B1+
B2
B3
L
H
S
1+
B1
F
August 2019
80 | USA | HEALTHCARE
One-Seat, Wood Arm, Low back, with Open Arm FAE3-WL1ONC Beech
One-Seat Plus, Wood Arm, Low back, with Open Arm FAE3-WL1BONC Beech
One-Seat, Wood Arm, Low back, with Semi Closed Arm FAE3-WL1SNC Beech
One-Seat Plus, Wood Arm, Low back, with Semi Closed Arm FAE3-WL1BSNC Beech
One-Seat, Wood Arm, Low back, with Closed Arm FAE3-WL1CNC Beech
One-Seat Plus, Wood Arm, Low back, with Closed Arm FAE3-WL1BCNC Beech
One-Seat, Wood Arm, High back, with Open Arm FAE3-WH1ONC Beech
One-Seat Plus, Wood Arm, High back, with Open Arm FAE3-WH1BONC Beech
One-Seat, Wood Arm, High back, with Semi Closed Arm FAE3-WH1SNC Beech
One-Seat Plus, Wood Arm, High back, with Semi Closed Arm FAE3-WH1BSNC Beech
One-Seat, Wood Arm, High back, with Closed Arm FAE3-WH1CNC Beech
One-Seat Plus, Wood Arm, High back, with Closed Arm FAE3-WH1BCNC Beech
Line Series Chair Type Size Arm Type Arm Cap
Faeron Wood Arm Low Back One-Seat One-Seat Open Arm No Cap Lounge Seating Plus
High Back One-Seat Wide One-Seat Wide Semi Closed Arm Urethane Cap Plus Two-Seat Two-Seat Closed Arm Solid Surface Cap Plus
Three-Seat Three-Seat Solid Surface Arm Plus
FAE 3-W NC
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL Species 1 2 3 4 5 6 7 8 9
PRODUCT CODE KEY
L
H
O
UCS
C SC
SA
1464 1518 1572 1682 1790 1898 2007 2115 2333
1516 1570 1625 1733 1841 1950 2058 2168 2385
1868 1948 2029 2190 2350 2511 2672 2832 3155
1920 2001 2081 2242 2403 2564 2724 2885 3206
1883 1964 2044 2205 2366 2527 2687 2848 3169
1936 2015 2096 2257 2418 2578 2739 2900 3222
1635 1701 1768 1901 2033 2166 2299 2431 2697
1687 1753 1820 1952 2086 2218 2350 2484 2749
2040 2132 2224 2409 2594 2779 2964 3149 3519
2091 2184 2277 2462 2646 2831 3016 3201 3570
2054 2147 2240 2425 2610 2795 2979 3164 3534
2107 2199 2292 2476 2661 2846 3031 3216 3586
ORDERING NOTES: Faeron chairs can be specified with Urethane Arm Caps (UC), Solid Surface Arm Caps (SC) or Solid Surface Arm (SA),replace “NC” in the model number with the Arm Style selection below and add the upcharge listed on page 76.
1
2
3
B1+
B2
B3
1+
B1
FAERON LOUNGE | WOOD ARM, LOW & HIGH BACK LOUNGE
August 2019
HEALTHCARE | USA | 81
FAERON LOUNGE | WOOD ARM, LOW & HIGH BACK LOUNGE
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL Species 1 2 3 4 5 6 7 8 9
One-Seat Wide, Wood Arm, Low back, with Open ArmFAE3-WL1+ONC
One-Seat Wide Plus, Wood Arm, Low back, with Open ArmFAE3-WLB1+ONC
One-Seat Wide, Wood Arm, Low back, with Semi Closed Arm FAE3-WL1+SNC Beech
One-Seat Wide Plus, Wood Arm, Low back, with Semi Closed Arm FAE3-WLB1+SNC
One-Seat Wide, Wood Arm, Low back, with Closed Arm FAE3-WL1+CNC Beech
One-Seat Wide Plus, Wood Arm, Low back, with Closed Arm FAE3-WLB1+CNC
One-Seat Wide, Wood Arm, High back, with Open Arm FAE3-WH1+ONC Beech
One-Seat Wide Plus, Wood Arm, High back, with Open ArmFAE3-WHB1+ONC
One-Seat Wide, Wood Arm, High back, with Semi Closed Arm FAE3-WH1+SNC Beech
One-Seat Wide Plus, Wood Arm, High back, with Semi Closed ArmFAE3-WHB1+SNC
One-Seat Wide, Wood Arm, High back, with Closed Arm FAE3-WH1+CNC Beech
One-Seat Wide Plus, Wood Arm, High back, with Closed ArmFAE3-WHB1+CNC
1608 1682 1755 1903 2051 2198 2346 2494 2789
1664 1737 1812 1959 2107 2255 2403 2550 2846
2012 2112 2212 2412 2612 2811 3012 3211 3611
2068 2169 2268 2468 2667 2868 3068 3267 3667
2027 2128 2228 2427 2627 2827 3027 3226 3626
2084 2183 2283 2484 2683 2883 3083 3283 3683
1791 1877 1963 2135 2306 2478 2651 2822 3166
1847 1934 2019 2191 2363 2535 2706 2879 3222
2196 2307 2420 2643 2868 3092 3315 3540 3987
2252 2364 2475 2700 2924 3147 3372 3596 4044
2211 2323 2434 2659 2883 3106 3331 3555 4003
2267 2379 2491 2715 2939 3163 3387 3610 4059
ORDERING NOTES: Faeron chairs can be specified with Urethane Arm Caps (UC), Solid Surface Arm Caps (SC) or Solid Surface Arm (SA),replace “NC” in the model number with the Arm Style selection below and add the upcharge listed on page 76.
Line Series Chair Type Size Arm Type Arm Cap
Faeron Wood Arm Low Back One-Seat One-Seat Open Arm No Cap Lounge Seating Plus
High Back One-Seat Wide One-Seat Wide Semi Closed Arm Urethane Cap Plus Two-Seat Two-Seat Closed Arm Solid Surface Cap Plus
Three-Seat Three-Seat Solid Surface Arm Plus
FAE 3-W NC
PRODUCT CODE KEY
L
H
O
UCS
C SC
SA
1
2
3
B1+
B2
B3
1+
B1
August 2019
82 | USA | HEALTHCARE
FAERON LOUNGE | WOOD ARM, LOW & HIGH BACK LOUNGE
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL Species 1 2 3 4 5 6 7 8 9
Two-Seat, Wood Arm, Low back, with Open Arm FAE3-WL2ONC Beech
Two-Seat Plus, Wood Arm, Low back, with Open Arm FAE3-WLB2ONC Beech
Two-Seat, Wood Arm, Low back, with Semi Closed Arm FAE3-WL2SNC Beech
Two-Seat Plus, Wood Arm, Low back, with Semi Closed Arm FAE3-WLB2SNC Beech
Two-Seat, Wood Arm, Low back, with Closed Arm FAE3-WL2CNC Beech
Two-Seat Plus, Wood Arm, Low back, with Closed Arm FAE3-WLB2CNC Beech
Two-Seat, Wood Arm, High back, with Open Arm FAE3-WH2ONC Beech
Two-Seat Plus, Wood Arm, High back, with Open Arm FAE3-WHB2ONC Beech
Two-Seat, Wood Arm, High back, with Semi Closed Arm FAE3-WH2SNC Beech
Two-Seat Plus, Wood Arm, High back, with Semi Closed Arm FAE3-WHB2SNC Beech
Two-Seat Wood Arm, High back, with Closed Arm FAE3-WH2CNC Beech
Two-Seat Plus, Wood Arm, High back, with Closed Arm FAE3-WHB2CNC Beech
2026 2107 2189 2351 2514 2677 2840 3003 3329
2087 2168 2250 2412 2575 2738 2901 3064 3390
2430 2537 2645 2861 3075 3290 3505 3721 4150
2491 2598 2706 2921 3136 3351 3566 3782 4211
2445 2553 2660 2875 3091 3306 3520 3735 4166
2506 2614 2721 2936 3152 3367 3581 3796 4227
2153 2246 2341 2528 2715 2902 3089 3275 3650
2214 2307 2401 2589 2776 2963 3149 3336 3711
2558 2677 2797 3036 3275 3515 3754 3993 4471
2619 2738 2858 3097 3336 3576 3815 4053 4532
2573 2693 2812 3052 3290 3530 3769 4008 4487
2634 2754 2873 3113 3351 3590 3830 4069 4548
ORDERING NOTES: Faeron chairs can be specified with Urethane Arm Caps (UC), Solid Surface Arm Caps (SC) or Solid Surface Arm (SA),replace “NC” in the model number with the Arm Style selection below and add the upcharge listed on page 76.
Line Series Chair Type Size Arm Type Arm Cap
Faeron Wood Arm Low Back One-Seat One-Seat Open Arm No Cap Lounge Seating Plus
High Back One-Seat Wide One-Seat Wide Semi Closed Arm Urethane Cap Plus Two-Seat Two-Seat Closed Arm Solid Surface Cap Plus
Three-Seat Three-Seat Solid Surface Arm Plus
FAE 3-W NC
PRODUCT CODE KEY
L
H
O
UCS
C SC
SA
1
2
3
B1+
B2
B3
1+
B1
August 2019
HEALTHCARE | USA | 83
FAERON LOUNGE | WOOD ARM, LOW & HIGH BACK LOUNGE
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL Species 1 2 3 4 5 6 7 8 9
Three-Seat, Wood Arm, Low back with Open Arm FAE3-WL3ONC Beech
Three-Seat Plus, Wood Arm, Low back, with Open Arm FAE3-WLB3ONC Beech
Three-Seat, Wood Arm, Low back with Semi Closed Arm FAE3-WL3SNC Beech
Three-Seat Plus, Wood Arm, Low back with Semi Closed Arm FAE3-WLB3SNC Beech
Three-Seat, Wood Arm, Low back with Closed Arm FAE3-WL3CNC Beech
Three-Seat Plus, Wood Arm, Low back, with Closed Arm FAE3-WLB3CNC Beech
Three-Seat, Wood Arm, High back with Open Arm FAE3-WH3ONC Beech
Three-Seat Plus, Wood Arm, High back with Open Arm FAE3-WHB3ONC Beech
Three-Seat, Wood Arm, High back with Semi Closed Arm FAE3-WH3SNC Beech
Three-Seat Plus, Wood Arm, High back with Semi Closed Arm FAE3-WHB3SNC Beech
Three-Seat, Wood Arm, High back with Closed Arm FAE3-WH3CNC Beech
Three-Seat Plus, Wood Arm, High back with Closed Arm FAE3-WHB3CNC Beech
2603 2734 2864 3125 3386 3646 3906 4168 4689
2709 2840 2971 3231 3492 3752 4014 4274 4795
3008 3164 3321 3633 3946 4259 4572 4885 5511
3115 3270 3427 3740 4052 4365 4678 4991 5617
3023 3180 3336 3649 3962 4275 4587 4900 5526
3129 3286 3442 3755 4068 4381 4694 5007 5632
2781 2935 3090 3398 3708 4017 4325 4634 5253
2887 3041 3196 3505 3814 4123 4431 4741 5359
3185 3366 3546 3908 4269 4630 4991 5352 6074
3291 3472 3652 4014 4375 4736 5097 5458 6181
3201 3381 3562 3922 4283 4645 5006 5367 6089
3307 3488 3668 4029 4391 4751 5112 5473 6195
ORDERING NOTES: Faeron chairs can be specified with Urethane Arm Caps (UC), Solid Surface Arm Caps (SC) or Solid Surface Arm (SA),replace “NC” in the model number with the Arm Style selection below and add the upcharge listed on page 76.
Line Series Chair Type Size Arm Type Arm Cap
Faeron Wood Arm Low Back One-Seat One-Seat Open Arm No Cap Lounge Seating Plus
High Back One-Seat Wide One-Seat Wide Semi Closed Arm Urethane Cap Plus Two-Seat Two-Seat Closed Arm Solid Surface Cap Plus
Three-Seat Three-Seat Solid Surface Arm Plus
FAE 3-W NC
PRODUCT CODE KEY
L
H
O
UCS
C SC
SA
1
2
3
B1+
B2
B3
1+
B1
August 2019
84 | USA | HEALTHCARE
FAERON LOUNGE | UPHOLSTERED ARM, LOW BACK LOUNGE
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL 1 2 3 4 5 6 7 8 9
One-seat, Upholstered arm, Low back, No arm cap, Wood leg FAE3-UL1NCW
One-seat Plus, Upholstered arm, Low back, No arm cap, Wood leg FAE3-ULB1NCW
One-seat Wide, Upholstered arm, Low back, No arm cap, Wood leg FAE3-UL1+NCW
One-seat Wide Plus, Upholstered arm, Low back, No arm cap, Wood legFAE3-ULB1+NCW
Two-seat, Upholstered arm, Low back, No arm cap, Wood leg FAE3-UL2NCW
Two-seat Plus, Upholstered arm, Low back, No arm cap, Wood legFAE3-ULB2NCW
Three-seat, Upholstered arm, Low back, No arm cap, Wood leg FAE3-UL3NCW
Three-seat Plus, Upholstered arm, Low back, No arm cap, Wood legFAE3-ULB3NCW
Line Series Chair Type Size Arm Cap Leg Type
Faeron Upholstered Arm Low Back One-Seat One-Seat No Cap Beech Wood Leg Lounge Seating Plus
High Back One-Seat Wide One-Seat Wide Urethane Cap Silver Metallic Plus Two-Seat Two-Seat Solid Surface Cap Brushed Plus Nickel
Three-Seat Three-Seat Wood Arm Cap Plus
FAE 3-U W
PRODUCT CODE KEY
L
H
NC
UC
SC
ORDERING NOTES: Faeron upholstered chairs can be specified with Urethane Arm Caps (UC), Solid Surface Arm Caps (SC) , or Wood ArmCaps (WC), replace “NC” in the model number with the Arm Style selection below and add the upcharge listed on page 76.To specify the Metal Leg option below, replace “W” in the above model number with “S” for Silver Metallic or “N” for Brushed Nickel.
1
2
3
B1+
B2
B3
1+
B1
WC
S
N
1988 2106 2222 2457 2692 2927 3161 3396 3864
2040 2157 2275 2509 2744 2978 3213 3448 3917
2132 2268 2406 2679 2953 3227 3500 3774 4321
2188 2325 2462 2736 3009 3283 3557 3830 4378
2550 2694 2839 3127 3416 3706 3995 4283 4861
2611 2755 2900 3188 3477 3766 4056 4344 4922
3127 3321 3515 3901 4288 4674 5061 5448 6222
3234 3428 3621 4007 4394 4781 5168 5554 6328
August 2019
HEALTHCARE | USA | 85
One-seat, Upholstered arm, High back, No arm cap, Wood leg FAE3-UH1NCW
One-seat Plus, Upholstered arm, High back, No arm cap, Wood leg FAE3-UHB1NCW
One-seat Wide, Upholstered arm, High back, No arm cap, Wood leg FAE3-UH1+NCW
One-seat Wide Plus, Upholstered arm, High back, No arm cap, Wood legFAE3-UHB1+NCW
Two-seat, Upholstered arm, High back, No arm cap, Wood leg FAE3-UH2NCW
Two-seat Plus, Upholstered arm, High back, No arm cap, Wood legFAE3-UHB2NCW
Three-seat, Upholstered arm, High back, No arm cap, Wood leg FAE3-UH3NCW
Three-seat Plus, Upholstered arm, High back, No arm cap, Wood legFAE3-UHB3NCW
FAERON LOUNGE | UPHOLSTERED ARM, HIGH BACK LOUNGE
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL 1 2 3 4 5 6 7 8 9
ORDERING NOTES: Faeron upholstered chairs can be specified with Urethane Arm Caps (UC), Solid Surface Arm Caps (SC) , or Wood ArmCaps (WC), replace “NC” in the model number with the Arm Style selection below and add the upcharge listed on page 76.To specify the Metal Leg option below, replace “W” in the above model number with “S” for Silver Metallic or “N” for Brushed Nickel.
Line Series Chair Type Size Arm Cap Leg Type
Faeron Upholstered Arm Low Back One-Seat One-Seat No Cap Beech Wood Leg Lounge Seating Plus
High Back One-Seat Wide One-Seat Wide Urethane Cap Silver Metallic Plus Two-Seat Two-Seat Solid Surface Cap Brushed Plus Nickel
Three-Seat Three-Seat Wood Arm Cap Plus
FAE 3-U W
PRODUCT CODE KEY
L
H
NC
UC
SC
1
2
3
B1+
B2
B3
1+
B1
WC
S
N
2159 2288 2418 2677 2935 3195 3453 3712 4229
2211 2341 2470 2728 2988 3246 3505 3764 4281
2316 2464 2613 2911 3209 3506 3805 4103 4698
2371 2520 2670 2967 3265 3563 3860 4158 4754
2678 2834 2991 3304 3617 3930 4242 4556 5182
2739 2895 3052 3365 3678 3990 4303 4616 5243
3305 3522 3740 4175 4610 5045 5479 5915 6785
3411 3628 3847 4281 4716 5151 5586 6021 6891
August 2019
One-seat, Upholstered arm, Wingback, No arm cap, Wood leg FAE3-UW1NCW
One-seat Plus, Upholstered arm, Wingback, No arm cap, Wood leg FAE3-UWB1NCW
One-seat Wide, Upholstered arm, Wingback, No arm cap, Wood leg FAE3-UW1+NCW
One-seat Wide Plus, Upholstered arm, Wingback, No arm cap, Wood legFAE3-UWB1+NCW
Two-seat, Upholstered arm, Wingback, No arm cap, Wood leg FAE3-UW2NCW
Two-seat Plus, Upholstered arm, Wingback, No arm cap, Wood legFAE3-UWB2NCW
Three-seat, Upholstered arm, Wingback, No arm cap, Wood leg FAE3-UW3NCW
Three-seat Plus, Upholstered arm, Wingback, No arm cap, Wood legFAE3-UWB3NCW
FAERON LOUNGE | WINGBACK LOUNGE
Line Series Chair Type Size Arm Cap Leg Type
Faeron Upholstered Arm Wingback One-Seat One-Seat No Cap Beech Wood Leg Lounge Seating Plus
One-Seat Wide One-Seat Wide Urethane Cap Silver Metallic Plus Two-Seat Two-Seat Solid Surface Cap Brushed Plus Nickel
Three-Seat Three-Seat Wood Arm Cap Plus
FAE 3-U W
PRODUCT CODE KEY
W NC
UC
SC
1
2
3
B1+
B2
B3
1+
B1
COM COL FABRIC GRADES LEATHERDESCRIPTION/MODEL 1 2 3 4 5 6 7 8 9
ORDERING NOTES: Faeron upholstered chairs can be specified with Urethane Arm Caps (UC), Solid Surface Arm Caps (SC) , or WoodArm Caps (WC), replace “NC” in the model number with the Arm Style selection below and add the upcharge listed on page 76.To specify the Metal Leg option below, replace “W” in the above model number with “S” for Silver Metallic or “N” for Brushed Nickel.
WC
S
N
2462 2591 2720 2978 3238 3496 3755 4014 4531
2513 2642 2771 3031 3289 3548 3807 4066 4584
2617 2766 2915 3213 3511 3809 4107 4404 5001
2674 2822 2971 3269 3567 3864 4163 4461 5056
2979 3136 3292 3605 3919 4232 4545 4858 5484
3040 3197 3353 3666 3980 4293 4606 4919 5544
3607 3825 4042 4477 4912 5347 5782 6216 7087
3713 3931 4148 4583 5018 5453 5888 6323 7193
HEALTHCARE | USA | 86
August 2019
Printed in Canad
aPCFA
EMTL
USA2019 2019 Ver. 1
All products are air emissions certified and are available as FSC® certified
[email protected] | www.krug.ca | 1.888.578.KRUG
August 2019