REPORAND BAUGUHANDPLACE
The ExmembeOn 22n
PACKAGandhDelhi.
EPCH
Tel: 91-
Fax: 91-
RT ON ABARCODI
UST 2015” DICRAFT E, NEW DE
xport Promer exporternd AugustAGING A
hi Handicr
Ex
HOUSE, POC
-11-26135256 -11-26135518,2
AWARENEING IN EX AT THE BHAVAN
ELHI
motion Cours to educat, 2015 the
AND BARCrafts Bhav
Ms. Sh
port P
CKET 6 & 7, S
26135519
ESS SEMINXPORT OF CONFER
N, BABA
uncil for Hate them oe Council CODING
van, Baba
alini deliv
PromoHan
SECTOR 'C', L
DEL
NAR ON F HANDI
RENCE HA KHARAK
Handicrafton new an organised IN EXPORKharak S
vering lectu
otion Cndicraf
LOCAL SHOP
LHI-110070
“IMPORTCARFTS,
ALL, 3RD K SINGH
ts regularlynd emergind a seminRT OF HA
Singh Mar
ure in the S
Councfts
PPING CENT
Ema
TANCE OAT NEW FLOOR, R
H MARG,
y conductsng issues renar on IMANDICARg, Connau
Seminar
cil for
TRE, VASAN
ail :focusregiweb
OF PACKA DELHI ORAJIV GA, CONNA
s seminarsrelated to e
MPORTANRFTS, at thught Place
r
T KUNJ, NEW
[email protected] : www.epch.
AGING N 22nd
ANDHI AUGHT
s for its exports.
NCE OF he Rajiv e, New
W
m .in
MMr. Valechaa talking o
on Bar codees
The seminar was attended by around 30 delegates from different export houses. The seminar was presided over Mr. Ravi Passi (Member CoA EPCH) and the guest speaker for the event on the first topic was Ms. Shalini Srivastava. Ms. Shalini, discussed about the importance of effective and proper packaging of different products according to the norms of the countries exported. She discussed how an effective packaging can reduce the cost for the exporters. She informed that different types of products like wooden toys, glass products should be packed differently. Exporters should also focus on the marks and symbols used in the packaging. The session on importance of barcoding for handicrafts export was discussed by Mr. Gopal Valecha from Bar Code India Limited. A bar code is the small image of lines (bars) and spaces that is affixed to retail store items, identification cards, and postal mail and exported products to identify a particular product number, person, or location. Barcodes eliminate the possibility of human error. The occurrence of errors for manually entered data is significantly higher than that of barcodes. Mr. Gopal Valecha informed that there are two types of barcodes: Linear barcodes and 2D barcodes. The examples of various types of barcodes are EAN/UPC, Code 128, Data Matrix, PDF417, I2 of 5, Maxicode etc. Mr. Valecha informed that India currently follows the GS1 barcode system. Mr. Valecha told the participants, how they can use barcode system in their products, how to apply for barcode system and total cost that the exporter need to bear to implement the GS1 barcode system.
Questions put up by the audience –
Q. What is the difference between cushioning, void fill and wrapping? Products require different types of protection during shipment. Void Fill is simply filling the empty space in a box to prevent product from shifting during shipment. Cushioning is typically used for products that require more protection during shipment. Pad Pak cushioning pads come in a variety of paper weights, providing the ideal amount of cushioning for your products in transit. Wrapping provides ideal padding for fragile items or multiple products being packaged together (i.e. plates, glasses). Q. What types of products can paper protect during shipment? Paper can protect almost any product. If you want to see how paper can protect your product, contact our Package Engineers about creating a custom pack design. Q. What is UN Performance Packaging?
A receptacle and any other components or materials necessary for the receptacle to perform its containment function in conformance with United Nations (UN) specifications. This type of packaging must be certified according to a national
competent authority by design qualification testing in accordance with UN standards. This will ensure the packaging is appropriate for the carriage of dangerous goods.
Q: How does a barcode work?
A barcode essentially is a way to encode information in a visual pattern that a machine can read. The combination of black and white bars (elements) represents different text characters which follows a set algorithm for that barcode type. If you change the sequence of elements you get different text. A barcode scanner reads this pattern of black and white that is then turned into a line of text your computer can understand.
Q: Is the price of my item in the barcode?
A barcode can hold any type of text information you encode but with product labels the price in not usually encoded. The barcode will denote what product it is and your POS software or database will have pricing information associated to this.
Q:What is a 1D (linear) barcode? What is a 2D barcode?
A 1D (linear) code is the typical "picket fence" style barcode that people are most familiar with. There are several versions of 1D code and some encode only numbers while others can encode any keyboard character. All the information in the code is organized horizontally from left to right. These types of codes can be read by any type of barcode scanner. 2D barcodes are a bit more complex as they organize information vertically and horizontally. This allows 2D codes to hold much more information and take up less space than a 1D code. 2D codes require an imager scanner to be read properly.
We welcome suggestions and feedback to make this initiative more productive. Do write to us at: [email protected].
Seminar on “IMPORTANCE OF PACKAGING AND
BARCODING IN EXPORT OF HANDICARFTS”
EPCH, NEW DELHI
22nd August, 2015
1
Session on Significance of Labeling
and Marking in Export Packaging
Prof. Shalini Srivastava
22nd August, 2015
2
Key Markets and Export
Destinations
India
3
Snapshot (2013-14):
Indian handicrafts are exported across geographies with
the top 10 markets being the US, the UK, the UAE,
Germany, France, LAC, Italy, the Netherlands, Canada and
Australia.
The UAE was the third-largest importer of Indian
handicrafts with imports worth approximately US$ 348
million in 2013–14.
4
Cont….
Indian handicraft exports to LAC, the Netherlands,
Canada and Australia garnered export shares of 3.92 per
cent, 2.91 per cent, 2.29 per cent and 1.87 per cent,
respectively, in 2013-14.
The products exported included art metal ware, wood
ware, hand printed textiles and scarves, embroidered and
crocheted goods, shawls, zari and zari goods, imitation
jewellery and miscellaneous handicrafts such as lace, toys,
etc.
5
Cont….
The EU countries (such as the UK, Germany, France, Italy and Netherlands), in 2013-14, accounted for approximately 28.5 per cent of total handicrafts exported from India.
The US was the second highest importer from India and accounted for approximately 26 per cent of the total exports.
In 2013-14, the export of embroidered and crocheted goods brought in the most revenue to the country of about US$ 880.5 million followed by art metal wares of about US$ 716.08 million.
6
Packaging and Labeling
Handicraft - Few Considerations
7
Implications:
8
Packaging is a part of the presentation of a product, and stays with it throughout the distribution chain.
Poor presentation of handicrafts reinforces the prejudice that the product may be inferior, and removes demand in domestic as well as export markets.
The ability to produce labels or packaging of good quality, either on your own initiative or in response to a customer's request, enhances your product, and provides a very positive promotion for your business.
Main Functions:
9
Marking and Labeling:
to guarantee to the consumer that the product complies
with legal safety standards;
to give information about the product;
to give advice about use or care of the product;
to make the product attractive to the customer;
to incorporate the customer's brand name;
to identify the product to the customer.
Packaging can serve two further functions:
to protect the product during distribution;
to make handling and retail display easier.
Difference between Marks and Labels
A Mark:
A mark is a symbol and/or pictogram that appears on a
product or its respective packaging.
These range in scope from signs of danger to indications
of methods of proper recycling and disposal.
The intention of such marks is to provide the end-user
with information concerning safety, health, energy
efficiency and/or environmental issues relating to the use
or consumption of a product
10
Cont….
Labels:
Labels, on the other hand, appear in the form of written
text or numerical statements, which may be required but
are not necessarily universally recognizable.
Labels typically indicate more specific information about a
product, such as measurements, or an indication of
materials that may be found in the product (such as in
textiles or wood wares).
11
12
Few Considerations (Handicraft):
13
The first kind of information to which an exporter must
give attention is that required by law.
Even if no other presentational material is used, any labels
necessary to confirm compliance with legal standards
must be added to the product or to its package.
There may be different ways of doing this:
Cloth labels which are sewn to the actual product may be
required, so that the label remains throughout the
product's life.
An adhesive label attached to the product or its package
may be acceptable.
2. Cont….
14
Next in importance is information regarding the care of the product.
Any product which requires cleaning should advise its user how best to do this. This applies to all textile products, but also to others, such as wooden kitchenware products.
Importers need to protect themselves against complaints by consumers who mistreat products.
For example, if a hand knitted sweater should be dry cleaned, it would probably not survive very well being washed in a machine. If a consumer did this, a complaint would have much more force if the sweater gave no instructions about cleaning. If a label inside the product said 'dry clean only', the consumer could not reasonably complain.
3. Cont….
15
Check your spelling and punctuation.
An error in a label or package might imply to the
consumer a defect in the product, suggesting that the
production too has been careless.
Spelling mistakes can have odd results. An exporter in
Thailand labeled a package : woolly lamb instead of
'woolly lamp’ while exporting to UK.
It is easy to make errors when the language is not your
own. Hence, be careful.
Cont…
16
The story of a detergent manufacturer :
who decided to promote a new brand of powder by
showing three pictures—on the left a pile of dirty clothes,
in the centre the washing process, on the right a pile of
clean clothes. The powder was promoted in the Middle
East; the language duly charged to Arabic;
but the exporter overlooked that reading there is from
right to left.
The story may serve to emphasize that the package, as
well as the product information, must be right for
the target market.
4. Cont…
17
Use labels and packaging appropriate for the
product.
A convenient size is a first consideration. A label as large
as the product is not appropriate.
Make sure the label does not damage the product.
Adhesive labels can leave marks on leather, wood and
stone handicrafts, for example.
5. Cont….
18
Ensure that packaging protects the product
adequately. Packaging must take protection into account,
because the product will be distributed inside its package.
A stone carving in a box, for example, needs protective
wrapping inside the box. Without it, it will move about, and
movement makes breakage more likely. The amount of
external packing material used will not be relevant.
Products made from plant or animal materials should be
packaged in polythene bags only if the bags have holes for
ventilation. Otherwise moisture can cause mould to develop.
Example..Cont….
19
An exporter misunderstood Oxfam Trading's packaging requirements -
They ordered a set of 12 miniature pots from South America. They wanted to sell them from their shops in a box of one dozen, in order to keep them tidy on the shelf and include some information on the box.
The exporter made a wooden box of excellent quality which enabled them to distribute the pots safely from their warehouse to their shops.
However, the box had to be destroyed in order to open it in the shop. The purpose of the packaging had not been served, because the supplier confused their request, thinking it was a packing requirement rather than a packaging one for retail sale.
Marking of Packages
Implications and Parts
20
Implications:
Correct and complete marking of packages helps to
prevent incorrect handling, accidents, incorrect delivery,
losses of weight and volume and Customs fines.
Marking must be clear and precise. Its color should stand
out clearly from that of the package; it is usually black
in color.
Alternatively, it may also be applied on adhesive labels.
21
Cont…..
Where possible, black symbols on a white
background should be used.
Both when the marking is applied directly onto the
package and when adhesive labels are used, care must be
taken to ensure that marking is applied in a legible and
durable manner.
22
Cont…..
Adequate marking is an indispensable component of the
package. If the marking is at variance with the details on
the shipping documents, objections may be raised by the
Customs authorities.
If handling marking is inadequate, those parties whose
actions during transport, handling or storage of the cargo
have caused damage may be excluded from liability.
23
Parts:
1. Shipping mark
Identification mark: e.g. initial letters of receiver or
shipper or of receiver's company name
Identification number: e.g. receiver's order number
Total number of items in the complete consignment
Number of the package in the consignment
Place and port of destination
24
Cont….
2. Information mark
Country of origin: The country of origin must be stated in accordance with the provisions of the particular countries. Statement of the country of origin is often mandatory. In some cases it is not desired and, if contractually agreed, may even have to be omitted.
Failure to comply with such agreements entails a risk of blacklisting.
Indication of weight of package: From a gross weight of 1000 kg, packages must be marked with details of weight. With regard to ease of transport, handling and storage, the relevant standards also recommend indicating weight from a lower threshold.
Dimensions of packages: Standards specify that dimensions be stated in centimeters.
25
Cont….
3. Handling instructions "Handling marks" help to ensure that greater care is taken with cargo handling. It must be possible to tell,
whether the package is sensitive to heat or moisture
whether it is at risk of breakage
where the top and bottom are and where the center of gravity is located
where loading tackle may be slung
The symbols for package handling instructions are internationally standardized in ISO 780 (International Organization for Standardization)
26
E.g. Symbols:
Keep Dry
Cargoes bearing this
symbol must be protected
from excessive humidity
and must accordingly be
stored under cover.
If particularly large or
bulky packages cannot be
stored in warehouses or
sheds, they must be
carefully covered with
tarpaulins.
27
Cont….
Fragile, Handle with Care
The symbol should be
applied to easily broken
cargoes.
Cargoes marked with this
symbol should be handled
carefully and should never
be tipped over or slung.
28
Cont….
Tear off here
This symbol is intended
only for the receiver.
29
Labeling and Marking
European Union (EU)
30
EU and India:
31
Major importers: the UK, Germany, France, Italy, the
Netherlands.
The EU countries (such as the UK, Germany, France, Italy
and Netherlands), in 2013-14, accounted for
approximately 28.5 per cent of total handicrafts exported
from India.
EU and India :
Major Handicraft Products for Export
32
Art Metal wares
Germany, UK , Netherlands
Wood Wares
UK, Germany ,France
Hand Printed & Textiles & Scarves
UK, Germany
Embroidered & Crocheted Goods
UK, Germany, France
Shawls as Artwares
UK, France ,Germany
Zari & Zari goods
UK, Italy, Germany, France
Imitation Jewellery
UK, Italy, Germany
Miscellaneous Handicrafts
Germany, UK
Introduction:
The first step in investigating the marking, labeling and packaging legislation that might apply to a product entering the EU is to draw a distinction between what is mandatory and what is voluntary.
Some EU legislation refers only to the former, and vice versa; some legislation refers to both.
In addition, decisions related to mandatory marking, labeling and/or packaging requirements may sometimes be left to individual member states.
Finally, voluntary marks and/or labels are used as marketing tools in some EU member states.
33
Mandatory Marks & Labels
Textiles
Cosmetics
Dangerous Substances
Explosive Atmosphere
Electrical & Electronic Equipment
Household Appliances
Pricing
Footwear
Units of Measurement
Automotive
Maritime
Materials in Contact with Food
Noise Emission
Tyre labeling
Wood packaging
Energy Efficiency
Recycling - Separate Collection
34
Voluntary Marks and Labels
Cup/Fork Symbol (material in contact with food)
Eco-Label
Green Dot
Energy Star
‗e‘ Mark
Recycling Marks
35
APPLICABILITY OF VOLUNTARY AND
MANDATORY MARKS AND LABELS
Countries in the European Union (EU) :
Austria
Belgium
Bulgaria
Cyprus
Czech Republic
Denmark
Estonia
Finland
France
Germany
Greece
Hungary
Ireland
Italy
Latvia
Lithuania
Luxembourg
Malta
Netherlands
Poland
Portugal
Romania
Spain
Sweden
Slovakia
Slovenia
United Kingdom
36
Cont….
Additional Countries of the European Economic
Area (EEA) and European Free Trade Association
(EFTA) :
Iceland
Norway
Switzerland (EFTA)
Liechtenstein
37
MANDATORY MARKS AND LABELS
Handicraft
38
CE Marking
This is probably the most widely used and recognized marking required by the EU.
The letters "CE" are the abbreviation of French phrase "Conformité Européene" which literally means "European Conformity".
The CE marking demonstrates that a product meets all essential requirements (typically related to safety, health, energy efficiency and/or environmental concerns).
39
Cont….
CE marking is required for some of the following
products/product families:
- Radio and telecommunications terminal equipment
- Refrigeration appliances
- Machinery
- Simple pressure vessels
- Energy related products etc, Handicraft
Handicrafts
Toys
Recreational Crafts
40
TEXTILES
Textile products must be labeled or marked whenever they
are put onto the market for production or commercial
purposes (sale).
The names, descriptions and details of a textile‘s fiber content
must be indicated on products available to consumers.
With the exception of trademarks or the name of the
undertaking, information other than that required by the
directive must be listed separately.
Member States may require that their national language be
used on the labeling and marking required by the directive.
41
42
FOOTWEAR
Labels must convey information relating to the upper, the lining
and insole sock, and the outer-sole of the footwear article.
The information must be conveyed by means of approved
pictograms or textual information, as defined by the directive.
The label must be legible, firmly secured and accessible, and
the manufacturer or his authorized agent established in the
Community is responsible for supplying the label and for the
accuracy of the information contained therein. Only the
information provided for in the directive need be supplied.
There are no restrictions preventing additional information
being included on the label.
43
44
PACKAGING MATERIAL
The EU Packaging and Packaging Waste Directive harmonized
member state legislation regarding packaging material
composition and the management of packaging waste.
Composition of packaging material is addressed in a series of
EU-wide standards.
For the management of packaging waste through recycling
targets and collection and recycling systems, member states
have adopted voluntary marking mentioned in the report.
EU Packaging and Packaging Waste Market Research Report,
available online at:
http://www.buyusainfo.net/docs/x_6455675.pdf
45
E.g. Wood Packaging
Like the U.S., the EU has adopted legislation to ensure pest control in wood packaging.
The marking used for regulated materials is based on the International Plant Protection Convention (IPPC) compliance symbol shown in the example.
46
ISPM 15
47
International Standards For Phytosanitary Measures No. 15 (ISPM 15) is an International Phytosanitary Measure developed by the International Plant Protection Convention (IPPC) that directly addresses the need to treat wood materials of a thickness greater than 6mm, used to ship products between countries.
Its main purpose is to prevent the international transport and spread of disease and insects that could negatively affect plants or ecosystems.
Cont….
48
ISPM 15 affects all wood packaging material (pallets, crates etc.) requiring that they be debarked and then heat treated or fumigated with methyl bromide and stamped or branded with a mark of compliance.
Products exempt from the ISPM 15 are made from alternative material, like paper, plastic or wood panel products (i.e. hardboard, and plywood).
The Revision of ISPM No. 15 (2009) requires that wood used to manufacture ISPM 15 compliant Wood Packaging must be made from debarked wood not to be confused with bark free wood.
ISPM 15 was updated to adopt the bark restriction regulations proposed by the European Union in 2009.
For details:
http://www.ispm15.com/ISPM15_Revised_2009.pdf
VOULANTRY MARKS AND LABELS
Handicraft
49
THE ECO-LABEL
The European Eco-label scheme enables European consumers, including public and private purchasers, to easily identify officially approved green products across the European Union, Norway, Liechtenstein and Iceland.
Introduced in 1992, the label communicates to the customer that the marked products meet specific eco-friendly criteria that have been developed to apply to everyday consumer goods and services.
50
Eco – Label: Handicraft Items
Textile products
Textile coverings
Footwear
Wooden coverings
Wooden furniture
Printed paper products
Bed Mattresses
51
Recycling
The ―mobius loop‖ (sometimes known as the ―chasing arrows‖), based on an international standard, may be found on products throughout Europe and is meant to help consumers identify and participate in recycling schemes for product packaging and materials.
As well as being used on printed packaging, the chasing arrow symbol is sometimes featured in the moulds of glass, metal, paper, or plastic products.
Various kinds of loops indicate whether the product is recyclable, recycled or contains recycled material.
52
Glass
There are no EU-wide symbols used to designate the recyclable nature of glass.
However, it is certainly encouraged on the national level with an array of symbols.
The two shown are only a small sample of the total existing to show recycling capability.
53
Green Dot
The Green Dot system is a scheme in which participating bodies coordinate the collection, sorting and recovery of used packaging.
This system is actually administered according to national packaging laws (adhered to by packaging manufacturers, fillers, retailers and importers), and it should be noted that all participating national systems operate independently.
The umbrella organization, PRO-Europe, is responsible for managing the Green Dot labeling system in Europe.
54
Barcodes:
Why is it used?
Bar coding is used by manufacturers and distributors to
track production, parts, shipping and warehousing.
Retailers use bar coding for inventory control – crucial to
the success of any retail business.
Inventory cycle counts, point-of-sale checkout, purchasing
and sales analysis are just some of the business activities
that can easily be carried out using a retail bar code
system.
55
The European Article Numbering (EAN) Code:
In 1974, manufacturers and distributors of 12 European
countries formed an ad-hoc council to examine the
possibility of developing a uniform and standard
numbering system for Europe, similar to the UPC system
already in operation in the USA.
As a result, a UPC compatible system, called European
Article Numbering was established in February, 1977.
The basic difference was that it added an extra digit to the
beginning so that there would be plenty of numbers for the
entire world.
56
Cont….
To reflect increasing internationalization, the name was
changed to EAN International, in 1992.
EAN International is now used all over the world, and the
GS1 US mandated all retail systems in the United States
and Canada be able to recognize both UPC and EAN by
January 1, 2005.
57
EAN-13
There are a total of thirteen characters encoded in an EAN.
The first two to three characters are the country code, and the last number is the check digit.
The intermediate numbers consist of the manufacturer code and product code and vary in meaning depending on which country the code comes from.
58
Cont…..
59
The first digit is always placed outside the symbol, additionally
right quiet zone indicator (>) is used to indicate Quiet Zones
that are necessary for barcode scanners to work properly.
In barcode technology, a quiet zone is the blank margin on
either side of a bar code that's used to tell the barcode reader
where a barcode's symbology starts and stops.
The purpose of a quiet zone is to prevent the reader from
picking up information that does not pertain to the bar
code that is being scanned.
EU and Barcodes
Barcodes are not legislated by the European
Union; neither are they legislated by its member
states.
It is rare, however, to see products without barcodes.
The code system and its use is governed by voluntary
industry agreements.
60
EUTR and Vriksh
61
EUTR
62
EUTR (European Union Timber Regulation) by FLEGT
which The European Union Timber Regulation (EUTR) is
one part of the EU‘s FLEGT (Forest Law Enforcement,
Governance and Trade) Action Plan to help stamp out
illegal logging worldwide.
It prohibits the placing on the EU market of illegally
harvested timber and products derived from such timber.
It divides those dealing in wood or wood products into
two categories - operators and traders.
Cont….
63
EUTR has resulted in Complexity of Requirements:
1. Traceability of Wood Sources
2. Compliance with regulations
3. Complexity of supply chain
4. Market Access & Risk Management
Vriksh
64
The EPCH ―VRIKSH‖ Timber Legality Assessment and Verification Standard – India is intended for entities who want to accurately track and make claims about the legal origin and transport of their products.
Objectives:
1. To promote the responsible and legal use of wood in the handicrafts and home décor industry
2. To provide a viable solution to help the handicrafts exporters
3. To effectively deal with International Timber Regulation requirements
For details, visit :
http://vrikshindia.in/
EU Export Help Desk
65
Check the Export Helpdesk at:
www.exporthelp.europa.eu
EPAs
66
The Economic Partnership Agreements (EPAs) that the
EU has with African, Caribbean and Pacific (ACP)
countries, allows them to pay lower duties on some or
all of what they sell to the EU.
The EPAs are designed to facilitate these countries‘
integration into the global economy through gradual
trade liberalization and improved trade-related
cooperation.
Some useful web links:
67
http://ec.europa.eu/enterprise/sectors/textiles/files/studies/study-report-labelling-textile_en.pdf
https://new.export.gov/basic-guide/10-legal-considerations
http://www.austrade.gov.au/Invest/Doing-business-in-Australia/Investor-Guide/Running-a-business/Understanding-Australian-business-regulation/Australian-export-and-import-laws
http://emergingmarkets.ey.com/wp-content/uploads/downloads/2012/05/Doing-Business-in-UAE-2011.pdf
68
Thank You
Mobile Applications RFID Solutions System Integration
Importance of Barcoding in Handicrafts Sector
Gopal Valecha
Leading AIDC solution provider in Bar Coding, RFID, Mobile Computing and Enterprise WLAN
15+ years of Industry Leadership Ranked amongst Top 150 leading Indian IT
companies Team of 150+ industry professionals Presence in all metros and major cities of India Well equipped regional offices with team of sales,
support & development personnel
• The technologies which enable identification of products and capturing/recording of related data attributes in an automated manner
These technologies :
1. Enable Data accuracy
2. Speed
3. Eliminates manual intervention
Problems with manual collection and data entry:
1. Human errors
o Creeps in when data is collected and entered manually
2. Time factor
o Time delay between occurrence of activities and events and entry of associated data
o Manual methods are inherently time consuming
3. Administrative/Labour cost
1. Optical
o Bar codes (linear and 2-D), optical character recognition, machine vision
2. Electromagnetic
o Radio frequency identification (RFID)
3. Magnetic
o Data are encoded magnetically, similar to magnetic tape (e.g., plastic credit cards, bank checks), and magnetic ink character recognition
4. Smart card
o Small plastic cards imbedded with microchips (integrated circuits)
5. Biometric
o Voice recognition, fingerprint analysis, retinal eye scans
• ICT Functions
• -capture… • -store… • -process… • -share… • -manage… • …information
• Information on Items/Products can be captured automatically using Technologies like :
Barcode
RFID
Is a pattern of black bars and white spaces to encode product related information and to capture the same using scanners, automatically and with 100% accuracy
Barcoding:
Automates data capture at great speeds and with 100% accuracy.
Eliminates need for manual data entry which is error-prone
Provides unambiguous identification of products, consignments,
entities, etc.
Enables lower cost through increased productivity, elimination of errors and
savings in administrative and personnel costs
890101600508
• The type of barcode to use for a particular situation depends upon:
1. The use.
2. The data encoded in the barcode.
3. How the barcode will be printed
There are several different types of barcode standards for different purposes - these are called symbologies. Each type of symbology (or barcode type) is a standard that defines the printed symbol and how a device, such as a barcode scanner, reads and decodes the printed symbol.
• There are two types of barcodes: Linear barcodes and 2D barcodes. Some examples include:
EAN/UPC ,Code 128,Data Matrix,PDF417 ,I2 of 5,Maxicode etc
1D ( Linear ) Barcodes 2D ( 2 Dimensional ) Barcodes
Can Store data only in horizontal direction
Can store data in Horizontal & vertical direction
Less data encoding capacity High data encoding Capacity
Requires more space Requires less space
Normally used to store static data Used to store variable data
Can be read from left to right Can be read from any direction
NA Error Correction & Decoding capability
Are read by laser scanners Are read by imager scanners
16
• Managing inventory of handicraft SKUS ( high in numbers) i.e inventory
,distribution ,despatch management etc
• Lot of manual work so, possibility of error creeping in
• Involves a lot of time
• Arduous to take inventory of hundred & thousands of handicraft items
• Requirement of International buyers
Automatic data capture with 100% accuracy
Unique, universal and unambiguous identification of all handicraft products
Enables real time stock status/consignment visibility across the entire
distribution chain
It’s a tool for supply chain management
Meets up requirements of International buyers
Provides international look & feel to the handicraft products
Efficient management of handicraft items
Enables paper-less environment
18
19
20
The Office of the Development Commissioner (Handicrafts) for development of handicrafts in the country has initiated a very attractive financial assistance scheme to assist handicrafts exporters in adoption of GSI global identification standards and for bar coding, including handicrafts mark for generic products. Thru this scheme, member exporters of EPCH & CEPC can avail 100 % subsidy for
adoption of GS1 standards in barcoding. Total Fee for GS1 company prefix for 1000 products = Rs.38451/- * Financial assistance by O/o DC (Handicrafts ) = Rs.33500/- Fee payable by exporters = Rs.4951/- ( Rs.1500
Security Deposit + Rs.3451/- as service tax ) * Pls check with GS1 India if there is revision in fee
Thank you