Transcript
Page 1: Engineering drawing   lettering and lines presentation

Engineering Drawing Project

Engineering Drawing (FCE – 142)

Page 2: Engineering drawing   lettering and lines presentation

Group Members

Page 3: Engineering drawing   lettering and lines presentation

Standard Engineering Letteringand Lines

Page 4: Engineering drawing   lettering and lines presentation

Elements of Engineering DrawingEngineering drawing are made up of graphics language and word language.

Graphics language

Describe a shape (mainly).

Word language

Describe an exact size, location and specificationof the object.

Page 5: Engineering drawing   lettering and lines presentation

Elements of Engineering Drawing

Graphicslanguage

Wordlanguage

Lettering

Line Types

Geometricconstruction

Projectionmethod

Engineering Drawing

Page 6: Engineering drawing   lettering and lines presentation

Introduction to Types of Lines

• Each line has a definite form and line weight.

• The standard thick line weight is 0.6mm HB Lead.

• The standard thin line weight is 0.3mm HB Lead.

• The standard construction line weight is 0.5mm 2H Lead.

Page 7: Engineering drawing   lettering and lines presentation

Basic Line Types &Name according to application

ContinuousDashChain

Style

Thickness Thick Thin 1. Dimension line2. Extension line3. Leader line

Center line

Hidden line

Visible line

represent features that can be seen in the current view.

represent features that cannot be seen in the current view.

represents symmetry, path of motion, centers of circles,

axis of axisymmetrical parts.

indicate the sizes and location of features.

1. Visible line

3. Hidden line

4. Center line

2. Dimension line Extension line Leader line

Page 8: Engineering drawing   lettering and lines presentation

Main Line Types

Lines

Hidden Lines

Center Lines

Dimension Lines

Extension Lines

Leader LinesCutting Planes

Section Lines

Phantom Lines

Viewing Planes

Break Lines

Visible Lines

Page 9: Engineering drawing   lettering and lines presentation

Visible/Object Lines• Dark, heavy lines.• Used to represent the outline or contour of the object

being drawn.• Define features you can see in a particular view.

Page 10: Engineering drawing   lettering and lines presentation

Hidden Lines• Light, narrow, short, dashed lines.• Shows the outline of a feature that can not be seen in

a particular view.• Used to help clarify a feature, but can be omitted if

they clutter a drawing.

Page 11: Engineering drawing   lettering and lines presentation

Hidden Lines (Technique)

Page 12: Engineering drawing   lettering and lines presentation

Section Lines

• Thin line usually drawn at a 45 degree angle.• Indicates the material that has been cut through in a

sectional view.

Section Line

Page 13: Engineering drawing   lettering and lines presentation

Center Lines• Thin line consisting of alternating long and short

dashes.• Used to represent the center of round or cylindrical

features, or the symmetry of a feature.

Page 14: Engineering drawing   lettering and lines presentation

Dimension Lines• Thin lines capped on the ends with arrowheads and

broken along their length to provide a space for the dimension numeral.

• They indicate length.

Page 15: Engineering drawing   lettering and lines presentation

Extension Lines• Thin lines used to establish the extent of a dimension.• Can also be used to show extension of a surface to a

theoretical intersection as shown in (b).• Begin 1.5mm from the object and extend to 3mm

beyond the last dimension.• They should not cross dimension lines.

Page 16: Engineering drawing   lettering and lines presentation

Leader Lines• Thin lines used to connect a specific note to a feature.• Also used to direct dimensions, symbols, item number and

part numbers on a drawing.• Commonly drawn at 45, 30 and 60 degrees.• Has a short shoulder (3-6mm) at one end beginning at the

center of the vertical height of text, and a standard dimension arrowhead at the other end touching the feature.

• Leader lines should not cross each other.

• Leader lines should not be excessively long.

• Leader lines should not be vertical or horizontal.

• Leader lines should not be parallel to dimension lines, extension lines or section lines.

Page 17: Engineering drawing   lettering and lines presentation

Arrowheads• Used to terminate dimension lines and leader lines and on

cutting-plane lines and viewing plane lines.• They should be three times as long as they are wide.• They should be the same size throughout the drawing.• The filled arrowhead is generally preferred because of its

clarity.

Page 18: Engineering drawing   lettering and lines presentation

Cutting Plane Lines

• Thick broken line that is terminated with short 90 degree arrowheads.

• Shows where a part is mentally cut in half to better see the interior detail.

Page 19: Engineering drawing   lettering and lines presentation

Cutting Plane Lines (Example)

Page 20: Engineering drawing   lettering and lines presentation

Break Lines

• Used to break out sections for clarity or for shortening a part.

• Three types of break lines with different line weights:

a) Short Breaks.b) Long Breaks.c) Cylindrical Breaks.

Page 21: Engineering drawing   lettering and lines presentation

a) Short Break Lines• Thick wavy line.• Used to break the edge or surface of a part for clarity

of a hidden surface.

(a) Short break line on metal shape; (b) Short Break Line on wood shape.

Page 22: Engineering drawing   lettering and lines presentation

b) Long Break Lines

• Long, thin lines.• Used to show that the middle section of an object has

been removed so it can be drawn on a smaller piece of paper.

Page 23: Engineering drawing   lettering and lines presentation

c) Cylindrical Break Lines• Thin lines.• Used to show round parts that are broken in half to

better clarify the print or to reduce the length of the object.

Cylindrical conventional breaks for a solid and tube; where R = Radius

Page 24: Engineering drawing   lettering and lines presentation

Phantom Lines• Thin lines made up of long dashes alternating with

pairs of short dashes.• Three purposes in drawings

a) To show the alternate position of moving parts.b) To show the relationship of parts that fit together.c) To show repeated detail.

Page 25: Engineering drawing   lettering and lines presentation

Phantom Lines (Examples)

Page 26: Engineering drawing   lettering and lines presentation

Grades of Pencils used in Lines

Page 27: Engineering drawing   lettering and lines presentation

Example 1

Page 28: Engineering drawing   lettering and lines presentation

Example 2

Page 29: Engineering drawing   lettering and lines presentation

Lettering in Engineering Drawing

Lettering is used to provide easy to read and understand information to supplement a drawing in the form of notes and annotations.

Thus, it must be written with:

Legibility – shape & space between letters and words.

Uniformity – size & line thickness.

Lettering is an essential element in both traditional drawing and Computer Aided Design (CAD) drawing

Page 30: Engineering drawing   lettering and lines presentation

Types of Lettering

The two types of lettering are:1.Double Stroke Lettering.2.Single Stroke Lettering.

Page 31: Engineering drawing   lettering and lines presentation

1. Double Stroke LetteringIn Double Stroke Lettering the line width is greater than that of Single Stroke Lettering.

Double Stroke Lettering is further divided into:a)Double Stroke Vertical Gothic Lettering.b)Double Stroke Inclined Gothic Lettering.

A stencil is mostly used when hand drawing double stroked letters.

Page 32: Engineering drawing   lettering and lines presentation

2. Single Stroke LetteringThickness in single stroke lettering is obtained by a single stroke of pencil or ink pen.It is further divided into: (a) Single Stroke Vertical Gothic Lettering.(b) Single Stroke Inclined Gothic Lettering.

Single stroke vertical letters Single stroke inclined letters

Page 33: Engineering drawing   lettering and lines presentation

Conventions for Lettering• Use all CAPITAL LETTERS.• Use even pressure to draw precise, clean lines.• Use one stroke per line.• Horizontal Stroke are drawn left to right.• Vertical Strokes are drawn downward.• Curved strokes are drawn top to bottom in one continuous stroke on

each side.• Use kerning to eliminate excessive space between letters. –

[kerning refers to adjusting the space between characters, especially by placing two characters closer together than normal. Kerning makes certain combinations of letters, such as WA, MW, TA, and VA, look better.]

Page 34: Engineering drawing   lettering and lines presentation

Conventions for Lettering (cont.)• Use The Single-stroke, Gothic Style of Lettering.

• Always Skip A Space Between Rows Of Letters.

• Always Use Very Light Guide Lines.

• Fractions Are Lettered Twice The Height Of Normal Letters.

• Fraction Bars Are Always Drawn Horizontal.• Use a Medium (B, HB, F or H) Lead For Normal Lettering.• Use a Hard (2H To 4H) Lead For Drawing Guide Lines.

• Notes should be double spaced.

Page 35: Engineering drawing   lettering and lines presentation

Application of Lettering

Lettering in Engineering Drawings is used in writing Title Blocks which play a crucial role in drawings, they are used to record all of the important information necessary for the working drawings. A HB Pencil is used.

What does the Title Block contain?

Other uses of lettering include Dimensions and Notes on the engineering drawing.

Page 36: Engineering drawing   lettering and lines presentation

Placement of text on Engineering Drawings

Try and locate the text on the drawings going around.

Page 37: Engineering drawing   lettering and lines presentation

GuidelinesExtremely light horizontal lines that are necessary to regulate the height of letters.

In addition, light vertical or inclined guidelines are needed to keep the letters uniformly vertical or inclined.

Guidelines are absolutely essential for good lettering.

Guidelines are drawn using Hard (2H to 4H) Lead Pencils with light pressure. HB grade conical end pencils are used for lettering.

Procedure for Lettering

• Thin horizontal guide lines are drawn first at a distance ‘h’ apart.• Lettering Technique: Horizontal lines of the letters are drawn from

left to right. Vertical, inclined and curved lines are drawn from top to bottom.

• After lettering has been completed, the guidelines are not erased.

Page 38: Engineering drawing   lettering and lines presentation

Guidelines in Lettering (including Height)

hc1 c2

c3 b1 b2

-(height of capital letters)-(height of lower-case letters)-(tail of lower-case letters) -(stem of lower-case letters)-(spacing between baselines)-(spacing between baselines)

Recommended Size (height, h) of Letters/Numerals

Main Title 5mm, 7mm, 10mm

Sub-Title 3.5mm, 5mm

Dimensions, Notes etc. 2.5mm, 3.5mm, 5mm

h

c 2 c 2

Page 39: Engineering drawing   lettering and lines presentation

Guidelines for Lettering

• Drawing numbers, title blocks and letters denoting cutting planes, sections are written in 10mm size.

• Drawing title is written in 7mm size.• Hatching, subtitles, materials, dimensions, notes etc. are written in 3.5

mm size.• Space between lines is 3/10 h (height of capital letters)• Space between words may be equal to the width of the alphabet M or

3/5 h (height of capital letters).

Standard height for CAPITAL Letters and Numerals according to the Bureau of

Indian Standards (BIS) is: 1.8, 2.5, 3.5, 5, 6, 10, 14, 20 mm. (Sizes selected based upon size of drawing)

Page 40: Engineering drawing   lettering and lines presentation

Guidelines for Lettering

Page 41: Engineering drawing   lettering and lines presentation

Basics of Single StrokingStraight Slanted CurvedHorizontal

1 1 2

3

“I” letter “A” letter

1

2

3

4 5

6

“B” letter

Examples

Page 42: Engineering drawing   lettering and lines presentation

Order of Strokes

Stroking is done based on the slope of each letter and the strokes vary with order and direction.

Page 43: Engineering drawing   lettering and lines presentation

Various Single Stroking

Groups

Page 44: Engineering drawing   lettering and lines presentation

Stroking for Upper Case Letters & Numerals

Straight lineletters

Curved lineletters

&Numerals

Page 45: Engineering drawing   lettering and lines presentation

Stroking for Lower Case Letters

Page 46: Engineering drawing   lettering and lines presentation

Stroking Groups

The I-H-T Group•The letter I is The Foundation Stroke.•The top of T is drawn first to the full width of the square and the stem is started accurately at its mid point.

I H T

Page 47: Engineering drawing   lettering and lines presentation

Stroking Groups

The L-E-F Group•The L is made in two strokes.•The first two strokes of the E are the same for the L, the third or the upper stoke is lightly shorter than the lower and the last stroke is the third as long as the lower.•F has the same proportion as E.

L E F

Page 48: Engineering drawing   lettering and lines presentation

Stroking Groups

The V-A-K Group•V is the same width as A, the A bridge is one third up from the bottom.•The second stroke of K strikes stem one third up from the bottom and the third stroke branches from it.

V A K

Page 49: Engineering drawing   lettering and lines presentation

Stroking Groups

The M-W Group•Are the widest letters.•M may be made in consecutive strokes of the two verticals as of N.•W is made with two V’s.

M W

Page 50: Engineering drawing   lettering and lines presentation

Stroking GroupsThe O-Q-C-G Group•The O families are made as full circles and made in two strokes with the left side a longer arc than the right.•A large size C and G can be made more accurately with an extra stroke at the top.

O Q C G

The O-Q-C-G Group stroking will be demonstrated on the whiteboard

Page 51: Engineering drawing   lettering and lines presentation

Stroking GroupsThe O-Q-C-G Group (cont.)

Page 52: Engineering drawing   lettering and lines presentation

Stroking Groups

The D-U-J Group•The top and bottom stokes of D must be horizontal, fail line to observe this is a common fault with beginners•U is formed by two parallel strokes to which the bottom stroke be added.•J has the same construction as U, with the first stroke omitted.

D U JNote:- The bottom stroke in J is drawn once, and not twice as shown in the animation.

Page 53: Engineering drawing   lettering and lines presentation

Stroking Groups

The P-R-B Group•The number of stokes depends up on the size of the letter.•The middle line of P and R are on centerline of the vertical line.

P R B

Page 54: Engineering drawing   lettering and lines presentation

Stroking Groups

The N-Z-X-Y Group•The parallel sides of N are generally drawn first. •Z is drawn without lifting the pen. Z and X are both started inside the width of the square on top and run to full width on the bottom.

N Z X Y

Page 55: Engineering drawing   lettering and lines presentation

Other Stroking GroupsThe S-8-3 Group

The 0-6-9 Group

A perfect 3 should be able to be completed into an 8; An 8 can be made from an S construction. The S is made up of three strokes.

The cipher (zero) is narrower than the letter O and made of two strokes. The 6 and 9 have the cipher as their backbone. With their lobes 2/3 the figure’s height.

Page 56: Engineering drawing   lettering and lines presentation

Other Stroking Groups The 2-5-7-& Group

The Fraction Group

• Always made with a horizontal vinculum (a horizontal line used in mathematical notation).

• The figures are two-thirds the height of the whole numbers, with a clear space above and below the line, making the total height of the fraction nearly twice the cap height (h).

The bottom of 2 and top of 5 and 7 should be straight lines. For 2 the reverse curve should cross the center of the space. The ampersand (&) is made of three strokes.

Page 57: Engineering drawing   lettering and lines presentation

The Fraction Group (Example)

Page 58: Engineering drawing   lettering and lines presentation

Sample Video(showing single stoking in lettering)

Page 59: Engineering drawing   lettering and lines presentation

Spacing

Uniformity in spacing of letters is a matter of equalizingspaces by eye. •The background area between letters, not the distance between them, should be approximately equal. •Words are spaced well apart, but letters within words should be spaced closely.

•For either upper case or lower-case lettering, make the spaces between words approximately equal to a capital O.

•Avoid spacing letters too far apart and words too close together.

LINES AND LETTERINGS

L I N E S

T T E R SEL

Page 60: Engineering drawing   lettering and lines presentation

Types of Spacing

Page 61: Engineering drawing   lettering and lines presentation

Space between letters

Contour

DRAWINGContour can be denoted as straight, slant and curve.

Adjacent contour can be1. straight-straight : II, IN, IM, IP etc.2. straight-curve (or curve-straight) : IO, QR etc.

3. straight-slant (or slant-straight) : IV, IW etc.

4. curve-curve : OO, OG etc.

5. slant-curve (or curve-slant) : VO, WG, VC etc.

6. slant-slant : VW, VX etc.7. The ‘L’ and ‘T’ : LT

Page 62: Engineering drawing   lettering and lines presentation

Space between letters

Page 63: Engineering drawing   lettering and lines presentation

Space between letters

Page 64: Engineering drawing   lettering and lines presentation

Lettering Uniformity

• Important to produce good drawings.

• Uniform in style, size, inclination, weight and space.

• Carelessness might result in mistakes.

ENGINEERING DRAWINGS

Space between letters

• Spacing between characters, is normally (2/10)h.

• Spacing between words, is normally (6/10)h.

where h is the cap height.

Page 65: Engineering drawing   lettering and lines presentation

Examples of Common Mistakes in Lettering

L E t T E r I N G

L E T T E R I N G

L E T T E R I N G

LET T E R ING

L E T T E R I N G

Lettering style not uniform

Lettering height not uniform

Lettering inclination not uniform

Lettering thickness not uniform

Lettering space not uniform

Page 66: Engineering drawing   lettering and lines presentation

ReferencesFrench, T. E., (1918). A MANUAL OF ENGINEERING DRAWING FOR STUDENTS AND DRAFTSMEN. London: Hill Publishing Co., Ltd.

Engineering Drawing Fundamentals: Introduction to Engineering Drawing. Retrieved from http://pioneer.netserv.chula.ac.th/~kjirapon/lecture-note.html.

Madsen D. A., Madsen D. P., (2011). ENGINEERING DRAWING & DESIGN, Fifth Edition. New York: Cengage Learning.

Reddy K. V., (2008). TEXTBOOK OF ENGINEERING DRAWING. Hyderabad: BS Publications.

Page 67: Engineering drawing   lettering and lines presentation

THE END


Top Related