Download - Engineering drawing fnbe 04.14 final
![Page 1: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/1.jpg)
Introduction to Drawing
( ITD – ARC30103 )
Lim Joe Onn Jaclyn Hwang Jeff Ong Natalie Ki Pang Khai Shuen
Structural Engineering
Drawings
![Page 2: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/2.jpg)
WHAT ARE STRUCTURAL
ENGINEERING DRAWINGS?
![Page 3: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/3.jpg)
Introduction
A type of technical drawing that
shows details and information
such as…
RoofsFoundations Beams
Applies Math and Science concepts to design
structures, resulting in stability and
sustainability of the structure.
![Page 4: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/4.jpg)
![Page 5: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/5.jpg)
To archive the geometric form of the design.
To communicate ideas between designers and
manufacturing personnel.
To act as an analysing tool.
To stimulate the design.
To serve as a completing checker.
To support large number of perspective
references.
Importance
![Page 6: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/6.jpg)
Thank You
Steps involved in
producing
Engineering
Drawings
![Page 7: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/7.jpg)
![Page 8: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/8.jpg)
![Page 9: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/9.jpg)
![Page 10: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/10.jpg)
![Page 11: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/11.jpg)
![Page 12: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/12.jpg)
![Page 13: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/13.jpg)
![Page 14: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/14.jpg)
![Page 15: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/15.jpg)
![Page 16: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/16.jpg)
Elements in
Engineering Drawings
![Page 17: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/17.jpg)
![Page 18: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/18.jpg)
Lines
![Page 19: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/19.jpg)
ScalesEngineering Drawings are always to scale.
1:100
1:50
1:25
1:10
1:5
![Page 20: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/20.jpg)
Dimensions
Factors to take into consideration:
method and line type that is used for dimensioning.
The linear dimension would be the overall, auxiliary
depiction and the second form of dimensioning would be
the diameter and radii of the structure.
A mixture of the two would depict the position of ‘The Hole’
in an engineering drawing.
![Page 21: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/21.jpg)
![Page 22: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/22.jpg)
- Shows the
builder and
others the
required size
for every
parts of the
building.
- Unbroken
lines.
- 2 mm away
from the
object being
dimensioned.
![Page 23: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/23.jpg)
2-Dimensional (2D)
There are multiple types of 2D Drawing Types in Structural
Engineering.
- Plan:
‘Top View’, ‘Floor Plan’ & ‘Roof Plan’
- Sections:
‘Cross-Section’ & ‘Longitudinal Section’
- Elevations:
‘Front Elevation’, ‘Right Elevation’, ‘Left Elevation’ and
‘Rear Elevation’
![Page 24: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/24.jpg)
![Page 25: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/25.jpg)
3-Dimensional (3D)
3-Dimensional engineering drawings
are also known as ‘Production
Drawings’
The 3-Dimensional (3D) Drawing Types:
- Orthogonal Projections
- Pictorial Drawing: Isometric & Oblique
- ‘’Working Drawings’’
![Page 26: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/26.jpg)
![Page 27: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/27.jpg)
Projection
of Engineering
Drawings
![Page 28: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/28.jpg)
Orthographic Projection
Orthographic projection drawings are used to
describe buildings, structures or objects pictorially.
Showed through first and third angle projection.
![Page 29: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/29.jpg)
![Page 30: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/30.jpg)
![Page 31: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/31.jpg)
![Page 32: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/32.jpg)
Graphical Projection
Graphical Projection drawings
have two different types:
1) Perspective projection
2) Parallel projection
![Page 33: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/33.jpg)
![Page 34: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/34.jpg)
Types of Projections
Axonometric
Isometric
Diametric
Trimetric
Oblique
![Page 35: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/35.jpg)
![Page 36: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/36.jpg)
Hatchings for Materials
Usually used in sectional views.
To show the materials of the
structure cut by the section plane.
![Page 37: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/37.jpg)
![Page 38: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/38.jpg)
![Page 39: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/39.jpg)
![Page 40: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/40.jpg)
Thank You Thank you.
![Page 41: Engineering drawing fnbe 04.14 final](https://reader033.vdocuments.us/reader033/viewer/2022052912/55a0eabd1a28ab5a088b46a1/html5/thumbnails/41.jpg)
• B.S. 1192 : Part 1,2,3,4,5 Construction Drawing Practice• Construction Unit (1998), Computer-Aided Design using MicroStation 95, Industrial
Centre, The Hong Kong Polytechnic University.• Dennis Neeley (1996), CAD and the Practise of Architecture, New York, N.Y.: J.
Wiley• Earle James H., (1991), Drafting Technology, Addison-Wesley• Elsheikh Ahmed (1995), An Introduction to Drawing for Civil Engineers, McGraw-
Hill• Jude D.V., (1983), Civil Engineering Drawing London ; New York : Granada• Muller Edward J (1996). Reading Architectural Working Drawing , Prentice Hall• Pickup F. & Parker M. A. (1970) Engineering Drawing with Worked Example
London : Hutchinson.• Ratensky A. (1983), Drawing and Model making, Whitney Library of Design• Thompson Arthur, (1993). An Introduction to Construction Drawing, London : E.
Arnold.• ‘’ Engineering Drawings – Sixth Edition’’ by A.W Boundy (604.2)• ‘’Introduction to Engineering Drawing – Second Edition’’ by Warren J. Luzadder &
Jon M. Duff ( 604.2)
Guarantee at least 70% referencing from books!
References