Confidential 2
Engineer TrainingMain Window
Print options
Archive
Print queue
Tool bar
Preview&information
Status bar
Local Disk Capacity
Confidential 3
Engineer TrainingMain Window – Print Options
Mode: Dependable on chosenPrint SET
Print SET: Dependable on print sets built in Configuration>Print SET and match jobs resolution in the Queue
Direction: Dual/Super Text
Print Speed: Super Fast, Fast, Medium, Slow
Ink amount: 100%–800%(mode dependable)
Noise: 0–30%
Multiply: x1, x2, x4, x0.5 (image size)
LUT: Color Look Up Table
Units: cm/inch
Confidential 4
Engineer TrainingDirection – Super Text
A unique single-directional printing technique (left to right only).
Produces excellent output quality for very small text and edges
Intended for close-viewing applications.
Confidential 5
Engineer TrainingImport
TIFF 1 bit
TIFF 8 bitChoose type of file/s:
Tiff 8 bit: 5,11, 23 dpiTiff 1 bit: 46, 92, 185, 370dpi
Confidential 6
Engineer TrainingImport
To Print Queue
ArchiveImport image to:
Change file name if required (A new name)
or: Import
Confidential 7
Engineer TrainingEdit
Common
Copies
Step & Repeat
XGap
YGap Zero
YGap default +
File Info
Skip white
LUT
Margins (Center)
L: (left)
Center
Cropping
Backlit Front Side
Number of backlit rulers
Size
Color [%]
Crop on preview
Tiling
Columns
W: (width)
From: to:
Rows
H: (Height)
From: to:
Overlap
Confidential 8
Engineer TrainingEdit – File Info
Right Click onFile Info opensa dialog box.
The File Info option provides the facility to print details at the bottom of a printed image.
Additional Text
Note:File Info details are added to the following jobs (When File Info is checked).
Confidential 9
Engineer TrainingEdit – Skip White
This option may be activated with printing images that contain large blocks of white (areas in excess of approximately 100 cm in height), which do not require printing.
This useful feature (also known as logical seeking) saves time.
Confidential 10
Engineer TrainingEdit – Step & Repeat
Allows you to print copies Horizontally.
Automatically arranges the images according to the media width.
Confidential 11
Engineer TrainingEdit – YGap Zero
Allows you to print copies Vertically without any Gap.
Note: When using this option disable:
File Info
Skip White
Overlaps
Backlit
Confidential 12
Engineer TrainingEdit – Margins
L: (Left) Set the margines you require in the left position of your media
Center: Automatically positions the image in the center of the media width.
Confidential 13
Engineer TrainingPrint
Terminate – Stops after current print file(finish print)
Abort – Immediate stop the current print
Maintenance in pause position
Confidential 14
Engineer TrainingBacklit Printing
Backlit application provides you the option to print on both sides of the media, to create an accurate quality for duble side printing the same image
Choose Backlit
Use 2 rulers
Confidential 15
Engineer Training
Controls the image position while printing the second side.
Click while printing
X / Y adjustment
Rotation adjustment
For detailed information see the backlit chapter in the user manualor the backlit application note.
Backlit Printing (Cont.)
Confidential 16
Engineer TrainingConfiguration - Measure
This unique feature enables the operator to print the same image or different tiles on more than one substrate roll at the same time, and get maximum system utilization.
1-3 rollsMulti Roll option
Auto Measure
For detailed information see the multi-roll chapter in the user manual.
Confidential 17
Engineer TrainingConfiguration – MODE
Each MODE is built with specific configuration
• Resolution
• Maximum Ink percentage (%)
• Head Frequency (max 5.4 KHz)
Confidential 18
Engineer TrainingConfiguration – Print SET
Print SET configuration name
Media Tracking
Speed
Automated Registration tests
Confidential 19
Engineer TrainingConfiguration – Print SET
Click Add
Material nameWrite width, type, color, etc.)
Chose MODEResolution is determined by the Mode
Remove: Remove a Print Set
Confidential 20
Engineer TrainingConfiguration – Registration
To set the registration:
1. Check the nozzle status using: Nozzles Test
2. Adjust Cyan left/right Adjustment
3. Adjust MYK left/right Alignment
4. Adjust X/Y Color Alignment
Registration is set per Print SET/Speed
Confidential 21
Engineer TrainingConfiguration – Pattern Test
This test was designed for Sample mode only
We can decide which heads will be used for printing. We can choose one head from each couple on the machine; thus we can enhance our print quality.
Click on "Pattern test".When printing this test "Y delay" is automatically deactivated.We get a test print from each pair of heads on the machine, one above the other.We can see which head is better (nozzles, spray, accuracy etc...) between the two.
Confidential 22
Engineer TrainingConfiguration – Pattern (Test)
This test was designed for Sample mode only
Open the "Pattern" tabEnter the results.
Now, when printing in Sample mode, the machine will use only the best heads and the results will be the best possible.
Confidential 23
Engineer TrainingMaintenance
Head Voltage Power Supply
Load Motor SoftwareInitialize printer
Head Carriage to Home Position
Purging ink threw the heads
IR manual operation
Confidential 24
Engineer TrainingMaterial control
Dray last job (cm)
Backward
Forward
T - TensionDirection control
Z - Tension
Step (cm)
Confidential 25
Engineer TrainingColor LUT
Select Color LUT from the menu bar:Option valid for tiff 8 bit only
Color Look Up Table
Confidential 26
Engineer TrainingChanging Ink system
Select Ink System from the menu bar:
Choose theink set.
Confidential 27
Engineer TrainingAuto Clean
Select Auto Clean from the menu bar:
1. Select ON or OFF2. Set the purge
period.
3. Set the frequency.4. Set the delay.
Confidential 28
Engineer TrainingCalibration
Select Calibration from the menu bar:
• Motor calibration• Heads calibration• Backlit adjustment
Confidential 29
Engineer TrainingStatistic
Select Statistic from the menu bar:
Information about media use