Electrical, Electronic, Fiber Optics and
Telecommunications
Distribution by
FIBERARC GmbHKernenriedstrasse 13421 Lyssach
[email protected]+41 34 423 11 11
70
Telecom, Fiber Optics, Electrical & Electronics
Table of ContentsFIBER OPTICS
Examples of Typical Glass Fiber-Optic Constructions.................................................... 72Comparative Fiber Optic Tool Selection Charts ............................................................. 73FO-CF Fiber Optic Center Feed Stripper ........................................................................ 74FO 103-S Fiber Optic Stripper Line ................................................................................. 75FO 103-D-J, FO 103-D-250 “Dual-Hole” Fiber Optic Strippers ................................... 76FO 103-T-250-J “Tri-Hole” Fiber Optic Stripper ............................................................. 76SnC Strip n’ Cut .................................................................................................................... 77CFS-2, CFS-2 900, OPTISTRIP Fiber Optic Stripper ....................................................... 78FOJST Fiber Optic Jacket Slitting Tool ............................................................................ 79FOKC Fiber Optic Kevlar® Cutter ...................................................................................... 8086 1/2SF Electronics/Kevlar® Shears .................................................................................. 80KS-1, KC699 Kevlar® Shears ............................................................................................... 81ACS, ACS-2, ACS-K Armored Cable Slitter ...................................................................... 82BrightPath EMS 6.6/4.0 CommScope® Mid Span Entry Tool........................................ 83FDS, FDS-2-3MM Fiber Drop Stripper & Buffer Tube Slitter ........................................ 84MSAT, MSAT 5 Mid-Span Access Tool ............................................................................. 85MSAT Micro Mid-Span Access Tool.................................................................................. 86MSAT Kit Mid-Span Access Tool Kit ................................................................................. 86400 Series Fiber Buffer Tube and Drop Cable Slitter .................................................... 87400 Series Kit Fiber Buffer Tube and Drop Cable Slitter .............................................. 88FTS, FTS-005, FTS-035 Fiber Tube Scorer ...................................................................... 89DS-60-C, DS-90-W Diamond-Tip Fiber Optic Scribe ...................................................... 90CS-30-W Carbide-Tip Fiber Optic Scribe ......................................................................... 90CS-30-DE Double End Carbide Fiber Optic Scribe ........................................................ 90FOC-SS Fiber Optic Cleaver/FOC-125 Fiber Optic Cleaver ......................................... 91FOC-125 Fiber Optic Precision Cleaver ........................................................................... 91RMC-6 Ruler ......................................................................................................................... 92FO-VFL Fiber Optic Visual Fault Locator .......................................................................... 92CCT-2 Fiber Continuity Tester ........................................................................................... 93Fiber Optic Inspection Microscope 200x/400x ............................................................. 93FO-R12 Fiber Ribbon Access Tool .................................................................................... 94IET Insertion–Extraction Tool .............................................................................................. 94Fiber Optic Crimp Tool ...................................................................................................... 95RBT Riser Break-out Tool .................................................................................................... 95STR Steel Tape remover ...................................................................................................... 96FOPD-25, FOPD-LC, FS800, FS 900 Fiber Optic Polishing Disc ................................. 96FIBER OPTIC POLISHING KIT ............................................................................................ 97FIBER SAFE SAFETY KIT/FCCT 125/FCCT 250 Fiber Optic Cleaner .......................... 98MDP-4 Miller Dispensing Pump ........................................................................................ 99MDP-8 Miller Dispensing Pump ........................................................................................ 99
ELECTRICAL
RCS-114, RCS-158 Round Cable Strippers ...................................................................100MK02, MK02M Round Cable Strippers .........................................................................101MK04 Cable Jacket Stripper ............................................................................................102MK01DA Outer Jacket Cable Stripper ...........................................................................102721, 821, 921 Multi-Wire Strippers/Cutters ..................................................................103103-S Adjustable Wire Stripper & Cutter with cam adjustment .................................104100 Adjustable Wire Stripper & Cutter ..........................................................................104111-TAS Thumb Adjustable Wire Stripper & Cutter ....................................................105PS 1 / PS 2 Self-Adjusting Wire Stripper ........................................................................106MK 1 F/D Self-Adjusting Wire Stripper ..........................................................................107NN Wire Strippers ..................................................................................................... 107-10960 Utility Cutter ..................................................................................................................110
ELECTRONICS
205 Rural “C” Line Wire Slitter & Stripper ......................................................................110305 Figure-8 Aerial Self Supporting Duct Slitting Tools ..............................................111925CS/925CS-ERGO Splicers Scissors ..........................................................................112CK6, 925CS KIT Splicer’s Scissors/Splicer’s Knife/Splicer’s Kit ...................................113SPECIALTY SCISSORS .......................................................................................................114TWEEZERS..........................................................................................................................115AW, AWG Anti-Wicking Tools ..........................................................................................116DESOLDERING GUNS .....................................................................................................117SOFTY® ANTI-STATIC DISPOSABLE WORK MATS .......................................................118RFNP / RFNP-S Long Nose Plier .....................................................................................11985 Long Nose Plier ............................................................................................................119
TELECOM PDT-66/110 Punch Down Tool .........................................................................................120RJC, RJ Crimping Tool ......................................................................................................120BTC BT/RJ Crimping Tool .................................................................................................121SMART-STRIP Data Cable Strippers ................................................................................121LDT-UTP, DDT-UTP Jacket Trimmer .................................................................................122
72
Telecom, Fiber Optics, Electrical & Electronics
EXAMPLES OF TYPICAL GLASS FIBER-OPTIC CABLE CONSTRUCTIONS
• 125µm Equivalent to 0.005 in.• 900µm buFFer JaCket, often referred to as “tight buFFer”.• looSe tube, often referred to as “buFFer tube”.• 250 µm uv-Cured buFFer/Coating, often referred to as “bare Fiber”.
Simplex
Outer Jacket
Aramid Yarn, Kevlar®
250µm UV-Cured Buffer/Coating
125µm Cladding & Core
900µm Buffer Jacket
SCale 10:1
Distribution
Outer Jacket
Aramid Yarn, Kevlar®
250µm UV-Cured Buffer/Coating125µm Cladding & Core
900µm Buffer Jacket
SCale 2:1
Indoor/Outdoor Loose Tube
Outer JacketAramid Yarn, Kevlar®
250µm UV-Cured Buffer/Coating125µm Cladding & Core
Loose/Buffer tube common sizes: 2.0/2.5/3.0mm
SCale 2:1
73
COMPARATIVE FIBER OPTIC TOOL SELECTION CHARTS
Diameter of Remaining Fiber or Buffer Coating
Miller FO-103 Miller CFS FO-CF FO-SnC
80 to 100 micron FO 103-S-100(Part# 80355-1)
125 micron(from 250 micron buffer)
FO 103-S(Part# 80355)
FO 103-D-250(Part# 80675)FO 103-D-J
(Part# 80676)FO 103-T-250-J
(Part# 80677
CFS-2(Part#
46107-M)
FO-CF(Part#
81400)
FO SnC(Part#
81430)
250 micron FO-103-D-250(Part# 80675)
FO-103-T-250-J(Part# 80677)
FO-CF(Part#
81400)
FO SnC(Part#
81430)
400 micron FO 103-T-250-400(Part# 80740)FO 103-S-525
(Part# 80355-9)
125 micron(from 900 micron buffer)
FO 103-D-250(Part# 80675)
FO 103-T-250-J(Part# 80677)
CFS-2-900(Part# 81281)
Choose from tools below to access fibers in loose/buffer tubes
MSAT BrightPath EMS 6.6/4.0
MSAT 5 FDS 2-3mm
MSAT Micro FDS
MSAT Kit FTS
400 Series FTS-005
FTS-035
Part numbers vary depending on the outside diameter of the buffer tube. See individual tables in catalog for more information.
74
Fiber Optics
> New fiber stripper with center feed design allows for longitudinal fiber stripping> The fiber is fully supported in the stripping process of 900 micron buffer coating to 250 micron and standard 250 micron coating to 125 micron stripping> Side mounted stripper blades provide convenient stripping of 1.6 mm to 3 mm cable jackets> Measurement scale in inches/mm built into the tool jaw and body up to 2 3/4 in. (70 mm) for ease of proper cable preparation> Compact, lightweight and ergonomically designed for ease of use> All cutting surfaces are precision formed, hardened, tempered and
ground assuring precise cable jacket, buffer and acrylate removal with no scratching or nicking of the fiber
> Tool is factory set and requires no adjustment> Removable cleaning brush is conveniently attached to the stripper for periodic cleaning of stripping jaws> Tool supplied with its own individual protective polymer tool case for clean and safe storage> Patent Pending> Made in the U.S.A.> Dimensions: 1.17 x 2.19 x 4.08 in. (29.7 x 55.6 x 103.6 mm)> Weight: 2.8 oz (79 g)> Part #: 81400> FO-CF Brush Part No.: 81410
FO-CF - Fiber optiC Center Feed Stripper
JACKeT 900 MiCRON 250 MiCRON
THRee FiBeR STRiPPiNg STATiONS
75
> All cutting surfaces are precision formed, hardened, tempered and ground assuring precise buffer removal> Made in the U.S.A.> Length: 5.375 in (136.53 mm)> Weight: 2.5 oz (71 g)> See tables for part numbers
FO 103-S – Custom Applications> The same quality FO 103-S construction is available in a variety of stripping fiber diameters > Some models in the table below may be subject to a minimum order
Part # Model Minimum Stripping Blade Diameter
(microns) (inches)
80355 FO 103-S 125 µm .005 in.80355-1 FO 103-S-100 80-100 µm .003-.004 in.
80355-15 FO 103-S-140 140 µm .0055 in.80355-2* FO 103-S-150 150 µm .006 in.80355-3 FO 103-S-162 162 µm .0065 in.80355-4* FO 103-S-175 175 µm .007 in.80355-5 FO 103-S-187.5 187.5 µm .0075 in.
80355-10* FO 103-S-200 200 µm .008 in.80355-12 FO 103-S-225 225 µm .009 in.80355-6* FO 103-S-250 250 µm .010 in.80355-7 FO 103-S-280 275-280 µm .011 in.80355-8* FO 103-S-300 300 µm .012 in.80355-16 FO 103-S-400 400 µm .016 in.80355-9 FO 103-S-525 525 µm .021 in.
80355-17 FO 103-S-880 880 µm .035 in.80355-18 FO 103-S-1140 1140 µm .045 in.
> For stripping 250 micron buffer coating from 125 micron optical fiber> Precision diameter hole & V-opening in blade allow for accurate buffer coating removal> Pivot pin, spring and precision handles enhance tool functionality and durability> Factory set, requires no adjustment> Prevents scratching or nicking of optical fiber
New Part# New Model # Old Part# Old Model # Old Handle Color
80355-2 FO 103-S-150 NN152 46231 Gold80355-4 FO 103-S-007 NN175 46235 Mustard
80355-10 FO 103-S-200 NN203 46241 Red80355-6 FO 103-S-250 NN254 46249 Lt. Blue80355-8 FO 103-S-300 NN305 46255 White
All old part numbers are while supplies last. All new items come with yellow handles
*Replaces the No-Nik Fiber Optic Strippers. See table below for previous and new model/part numbers
FO-103S - Fiber optiC Stripper
76
Fiber Optics
> Dual hole models offer the same quality as our standard FO 103-S fiber tool coupled with a second hole
> FO 103-D-J: Second hole for stripping 1.6-3 mm fiber jackets and standard 125 micron fiber stripping (250 micron removal to 125 micron)
> FO 103-D-250: Second hole for stripping 900 micron tight buffer down to 250 micron buffer coating and standard 125 micron fiber stripping (250 micron removal to 125 micron) – allows longer stripping lengths without damaging the fiber
> Easy-to-read stripping diagrams imprinted on handles> Made in the U.S.A.> Length: 5.375 in. (137 mm)> Weight: 2.5 oz (71 g)> FO 103-D-J Part #: 80676> FO 103-D-250 Part #: 80675
FO 103-D-J/FO 103-D-250“dual hole” Fiber optiC StripperS
> Three-hole model performs all common fiber stripping functions in one compact tool.... – Hole for removal of 1.6 to
3 mm fiber jackets – Remove 900 tight buffer to
250 micron buffer coating – Standard 250 to 125 micron
stripping> Same consistent quality and features
found in our standard FO 103-S tool> Made in the U.S.A.> Length: 5.375 in. (137 mm)> Weight: 2.5 oz (71 g)> Part #: 80677> Also available: FO 103-T-400-250 Fiber Optic Stripper for 400
micron coated PM Fiber (Part : 80740)
FO 103-T-250-J “tri-hole” Fiber optiC StripperS
77
> New all-in-one unique tool design combines jacket stripping, optical fiber stripping and cutting of Kevlar® strength members in one compact tool body> Allows jacket removal from 1.6 to 3.0 mm with holes for stripping 900 micron tight buffer to 250 micron buffer coating and standard 125 micron fiber stripping.> Fiber stripper and Kevlar cutter slides out of the protective tool body when in use and slides back inside when not in use by activating the sliding tab located on each side of the tool> The fiber stripper and the Kevlar cutter are conveniently stored inside the tool body when not in use, for extra safety and tool life protection> Easy to read fiber stripping diagrams are molded into the tool body> Tool body has a handy molded-in loop for attaching/hanging purposes> All cutting surfaces are precision formed, hardened, tempered and ground assuring precise tool performance> Factory set, requires no adjustment> Made in the U.S.A.> Patent Pending> Dimensions: 3.75 x 1.25 x .70 in. (95 x 32 x 18 mm)> Weight: 3 oz (85 g)> Part #: 81430
SNC - Strip n’ Cut
78
Fiber Optics
> CFS-2 for stripping 250 micron buffer coating to expose 125 micron cladded fiber> CFS-2 900 strips 900 and 250 micron buffer coating down to 125 micron cladded fiber with only ONE-STEP STRIPPING PREPARATION> Second hole for stripping 1.6-3 mm fiber jackets> Pre-set at the factory—no adjustments needed> Will not scratch or nick glass fiber> All stripping surfaces are manufactured to precise
tolerances to assure clean, smooth strips> Comfort-grip, ergonomic handles> Lock to hold tool closed when it is not in use> Made in China> Length: 6.5 in (165 mm) > Weight: 4.2 oz (119 g) > CFS-2 Part #: 46107-M> CFS-2 900 Part #: 81281
> Removes secondary coatings from optical cable and other small cables up to 3.0 mm (0.12 inches O.D.)> Equally effective on loose tube or tight
fit fiber> Damage to cladding prevented by
inserting guide bushings which ensure precise location of the fiber throughout the stripping operation
> Simple setup for operation: fit a pair of guide bushings for selected lead diameter and adjust blade depth
> Supplied with storage case and guide bushings (0.5, 1.0, 1.5, 2.0, 2.5, 3.0 mm)> Stripping Capacity – Fiber optic tubes up to 3.0 mm (0.12 inches O.D.) – P.T.F.E. coated wires 0.5 to 3.0 mm (0.02 to 0.12 inches) O.D.> Replacement Blades (pair): Part No.: 39436> Replacement set guide bushings: Part No.: 39437> Weight: 20 g (1 oz)> Dimensions: 108 x 29 x 13 mm ( 4.3 x 1.1 x 0.5 inches)> Part #: 39435> Made in China
CFS-2/CFS-2 900 Fiber optiC Stripper
OPTiSTRiP - Fiber optiC Stripper
79
> Compact and easy to use ONE-STEP jacket slitter for PVC jacketed fiber cables> Provides two jacket slits 180 degrees apart with nick free jacket slitting required for cable preparation on certain fiber connectors> Blade cassettes have blade indicator marks providing the exact location of the blade for an accurate cable preparation length> Single blade cassette designed with two slitting channels to accomodate the various jacket sizes. > Factory set non-adjustable blade cassette for repeatable and exact cable preparation each and every time> Made in the U.S.A.> Dimensions: 2.875 x .875 x 2.125 in (73.03 x 22.23 x 53.98 mm)> Weight: .94 oz (26.7 g)> FOJST 2/3 mm part # 81210> FOJST 1.6/2.4 mm part # 81215
FOJST - Fiber optiC JaCket Slitting
80
Fiber Optics
> Designed to cut Kevlar® strength members in fiber optic cables> Powerful quick cutting action> Full serrated edge for consistent, fast and
clean cuts> Lightweight and compact> Return spring designed for precise repeated cuts> Ergonomic handles with cushioned non-slip grips> Made of high carbon steel specially treated for long life and trouble
free cuts> Made of Chinese and American parts> Engineered in the U.S.A> Length: 5.75 in. (146 mm)> Weight: 2.5 oz (72 g)> Part #: 36495
> 86 1/2SF is a high-leverage tool for cutting, trimming and slicing through fibers and other tough industrial and electronics material
> Use to cut and trim wire insulation materials, copper leads, filament wire, and nickel-ribbon
> Use 86 1/2SF to trim DuPont Kevlar® Aramid fibers> Hot-forged, high carbon steel for long life> Quick action spring response and two sharp points> 86 1/2SF has one blade serrated and yellow cushioned grips> Made in the U.S.A.> Length of cut: 0.63 in. (16 mm)> Length: 6.5 in. (165 mm)> Weight: 4.8 oz (136 g)> Part #: 46331 86 1/2SF> Part #: 46339 86 1/2S NO grips
FOKC - Fiber optiC kevlar® Cutter
86 1/2SF - eleCtroniC kevlar® ShearS
81
> Oversized molded handles for operator comfort> Blades are hardened stainless steel with a fine serration on one blade
to grip Kevlar® fibers and prevent slipping while cutting> Ambidextrous handles for right- and left- hand use> Made in Japan> Length of cut: 2.5 in. (64 mm)> Length: 7.25 in. (184 mm)> Weight: 1.6 oz (45 g)> Part #: 46175
> Lightweight shears ideal for cutting Kevlar® strength members found in fiber optic cable construction> Ergonomic molded handles provide comfort for both right and left
handed users > One micro-serrated blade reduces slippage for more positive cutting
action> Blades made from high carbon molybdenum, and vanadium steel for
long life> Made in Taiwan> Length: 5.5 in. (140 mm)> Weight: 2.8 oz (79 g)> Shears Only (Part #: 80671)> KS-1 available with nylon pouch with belt loop (Part #: 80665)> Nylon pouch only (Part #: 80669)
KS-1 - kevlar® ShearS
KC699 - kevlar® ShearS
82
Fiber Optics
> Professional grade tool ideal for slitting the corrugated copper, steel or aluminum armor layer on Fiber Feeder, Central Tube, Stranded Loose Tube fiber optic cables and other armored cables
> Rugged anodized aluminum and steel construction> Versatile design allows jacket or shield slitting on non-fiber optic
cables as well> Tool slits outer polyethylene jacket and armor in one operation – Performs longitudinal slitting and circumferential
(ringing) for end stripping – Blade rotates 90 degrees by activating blade lever,
allowing easy mid-span preparation (ringing and slitting)> ACS is adjustable from 0.315 in. (8 mm) to 1.125 in. (28.6 mm) cable O.D.> ACS 2 is adjustable from 0.157 in. (4 mm) to .393 in. (10 mm) for smaller cable O.D. options> Adjustable blade depth to 5.5 mm maximum to accommodate
different cable jackets> Cable guide wheel provides cable stability and allows for easier tool
movement along the cable> Red cable guide wheel (Part No.: 37896) for smaller O.D. cables 0.157 (4 mm) to .393 in. (10 mm) can be ordered separately> Made in the U.S.A.> U.S. Patent Nos.: D505, 056S> Height: 5 in (127 mm) > Weight: 10 oz (284 g)> ACS Part #: 37880 > ACS-2 Part #: 37897> ACS-K Part #: 37899 (kit includes ACS tool (Part # 37880 plus one red cable guide wheel kit (Part No.: 37896) for smaller O.D. cables> Replacement blade: Part No.: 37884 (CB 251-K)
ACS
ACS-2
ACS/ACS-2/ACS-Karmored Cable SlitterS
83
> Especially designed to mid-span access CommScope® BrightPath Self Support Figure 8 Outdoor Fiber Drop Cable
> Tool has two precise shaving channels, one to remove the outer MPDE jacket and one to access the 4 mm buffer tube fibers
> Fixed control of blade cutting depth and angle protects fibers from damage
> Cable is easily inserted and removed by opening and closing spring loaded tool halves with a convenient and quick turning thumb screw
> Replacement Blade for jacket and 4 mm buffer tube is Part No. 37048 (CB229)
> Length: 3.75 in. (95 mm)> Weight: 6.8 oz (193 g)> Part #: 42555> Made in the U.S.A.
BRigHTPATH eMS 6.6/4.0mid-Span entry tool
84
Fiber Optics
> Designed for stripping Flat Drop Fiber Cable used in FTTH “Fiber to the Home” applications> ONE STEP stripping action that removes the jacket in two locations top and bottom to expose the dielectric strength memberswhile allowing the quick removal of the jacket> Tool is small and has a lightweight polymer body for ease of use> Easily strips Flat Drop lengths of 2-15 feet plus> ONE TOOL ONLY - FDS will strip Flat Drop Fiber Cable on the cables listed in the table below. (Please call Customer Service for other cable manufacturers) U.S.: 860-635-2200 U.K.: 44-1384-400070> Made in the U.S.A.> Replacement Blade Part No.: 37048 (CB229)> Length: 3.75 in (95mm) • Weight: 6.8oz (193g)> Part #:42670
> Multi-purpose tool designed for stripping Flat Drop Fiber jacket and accessing 2 mm and 3 mm buffer tubes on (FTTH) “Fiber to the Home” applications> Three individual stripping channels in one compact tool body for jacket removal and 2 mm and 3 mm buffer tube slitting> Lightweight polymer body > T-bar handle grip design for extra ease of jacket stripping> Tool can be used with Flat Drop Fiber manufacturers listed in the table below. (Please call Customer Service for other cable manufacturers) U.S.: 860-635-2200 U.K.: 44-1384-400070> Made in the U.S.A.> Length: 3.75 in. (95mm) > Weight: 6.8oz (193g)> Part #: 42770> Jacket Replacement Blade Part #: 37048 (CB229) > Buffer Tube Replacement Blade Part #: 1 set 80794 (two blades) with 1/16 in. Allen Wrench (Note: 2 each CB229 (P/N37048) and two sets of 80794 required to replace all the blades on the FDS-2-3MM)
Drop Cable Manufacturer Stripping Channel
CommScope® ACorning A
Draka/Comteq AOFS A
Berk-Tek BPrysmian B
Sumitomo BSuperior Essex B
Drop Cable Manufacturer Stripping ChannelCommScope® A
Corning ADraka/Comteq A
OFS A
FDS - Fiber optiC Stripper
FDS-2-3MM - Fiber optiC Stripper & buFFer tube Slitter
85
> Allows easy mid-span access to optical fibers in loose buffer tubes> Access tube sizes from 1.9 mm to 3.0 mm> Shaves precise opening to prevent fiber damage> Sizing channels to easily determine tube size> Locking mechanism ensures tool will remain closed through the entire shaving operation> Replacement Blade: Part No.: 80935 (5 blades – 2 screws)> Made in the U.S.A.> Dimensions: 3.9 x 1.5 x 0.7 in. (99 x 38 x 18 mm)> Weight: 1.36 oz (38.5g)> Part #: 80930
> Quickly and easily access fibers in 2, 2.5 and 3 mm buffer tubes in a mid-span location without fiber damage> All blades precisely factory mounted in tube slitting channels with no adjustment required by the installer> Tool design incorporates buffer tube size gages on the tool body for ease of selecting proper tube slitting channel> Convenient spring loaded lever opens and closes the tool and lever becomes flush with the top of the tool body when closed> For use with the following diameter buffer tubes: 2.0 mm 1.9-2.1 mm (0.071 in.- 0.086 in.) 2.5 mm 2.4-2.6 mm (0.090 in.-0.110 in.) 3.0 mm 2.9-3.1 mm (0.110 in.- 0.126 in.) > Made in the U.S.A> Length: 2.5 in. (63.5 mm)> Weight: 8oz (226.7g)> Part #: 80785> Replacement Blade: Part # 80794 includes 1 blade set (2 each) and 1/16 in. Allen wrench> Same blade Part # for all three tool channels
MSAT - mid-Span aCCeSS tool
MSAT 5 - mid-Span aCCeSS tool
86
Fiber Optics
> Compact and user friendly tool provides quick and easy mid-span access to smaller buffer tubes without fiber damage> Tool design will accommodate a range of interchangeable inserts from 1.2 mm up to and including 1.8 mm > Accesses the fiber by precision “shaving” of the buffer tube wall
> Consistent and reliable buffer tube access without any adjustment to tool insert or blade> Double-sided blade for twice the blade life> Locking lever mechanism provides constant pressure to the two body halves ensuring a precise and consistent shaving operation> Patent Pending> Made in the U.S.A.> Dimensions: 2.88 x 1.63 x 1.50 in. (73 x 41 x 38 mm)> Weight: 6.6 oz (187 g)> Insert dimensions: 1.77 x 0.472 in. (45 x 12 mm)> Insert weight: 0.9 oz (26 g) > Tool body available as Part No.: 81460 (without insert). > Replacement Blade Part No.: 81472 (includes 1 double sided blade, 1 screw and 1/16 in. hex wrench)> Tool Inserts and Part No.: 1.2 mm-81512 1.3 mm-81513 1.4 mm-81514 1.5 mm-81515 1.6 mm-81516 1.7 mm-81517 1.8 mm-81518
MSAT MiCRO - mid-Span aCCeSS tool
MSAT KiT kit For mid-Span aCCeSS
> Designed for easy mid-span of fiber tubes in the range from 1.2-3.0 mm> Foam Lined Kit includes: RCS-114 - Jacket Stripper FO-103-S - Fiber Stripper KS-1 Kevlar Shears MSAT 5 - Mid-Span Access Tool MSAT Micro Body 4 MSAT Micro Inserts (1.2 mm, 1.4 mm, 1.6 mm, 1.8 mm)> Part #: 81500
87
> For mid-span and end slitting of fiber buffer tubes and fiber drop cable> Different models available matched to the size of buffer tube or drop
cable to be prepared> Dual blade design> Self closing for safety> Latch locks tool closed> Comfortable soft plastic grips> Made in the U.S.A.> Length: 6.5 in. (165 mm)> Weight: 9.0 oz (255 g)> Replacement Blade Part #: 80235 (two blades per package)> See table for part numbers
400-Series Guide Block Sets
Model Part# Color Tube Sizes
(mm OD) (in OD)
400 - 1.8 mm 80950 Copper 1.6 - 1.8 0.063 - 0.071400 - 2.2 mm 80951 Red 2.0 - 2.2 0.079 - 0.087400 - 2.5 mm 80952 Blue 2.3 - 2.5 0.091 - 0.098400 - 3.0 mm 80953 Green 2.6 - 3.0 0.102 - 0.118400 - 3.3 mm 80954 Green 3.0 - 3.3 0.118 - 0.130400 - 3.5 mm 80955 Yellow 3.3 - 3.6 0.130 - 0.141400 - 4.0 mm 80956 Grey 3.7 - 4.1 0.145 - 0.161400 - 4.5 mm 80957 Beige 4.2 - 4.5 0.165 - 0.177400 - 5.0 mm 80958 Dark Brown 4.6 - 5.1 0.181 - 0.201400 - 6.0 mm 80959 Dark Blue 5.6 - 6.0 0.220 - 0.236*400 - Drop A 80960 Gold 4.4 x 8.2 0.173 - 0.323400 - 8.5 mm 80962 Orange 8.3 - 8.5 0.327 - 0.335400 - 9.1 mm 80963 Blue 8.9 - 9.1 0.350 - 0.358
ModelGuide Block Set
Part# Color Tube Sizes
(mm OD) (in OD)
1.8 mm 80835-001 Copper 1.6 - 1.8 0.063 - 0.0712.2 mm 80835-002 Red 2.0 - 2.2 0.079 - 0.0872.5 mm 80835-003 Blue 2.3 - 2.5 0.091 - 0.0983.0 mm 80835-004 Green 2.6 - 3.0 0.102 - 0.1183.3 mm 80835-005 Purple 3.0 - 3.3 0.118 - 0.130Drop A 80835-006 Gold 4.5 x 8.2 0.173 - 0.3233.5 mm 80835-007 Yellow 3.3 - 3.6 0.130 - 0.1414.0 mm 80835-008 Grey 3.7 - 4.1 0.145 - 0.1614.5 mm 80835-009 Beige 4.2 - 4.5 0.165 - 0.1775.0 mm 80835-010 Dark Brown 4.6 - 5.1 0.181 - 0.2016.0 mm 80835-012 Dark Blue 5.6 - 6.0 0.220 - 0.2368.5 mm 80835-013 Orange 8.1 - 8.8 0.319 - 0.3359.1 mm 80835-015 Blue 8.9 - 9.1 0.350 - 0.358
400 SeRieS - Fiber buFFer tube & drop Cable Slitter
88
Fiber Optics
> Kit for mid-span and end slitting of fiber buffer tubes and fiber drop cable> Interchangeable color coded head blocks matched to
buffer tube or drop cable size> Blade depth precision factory set and can be field adjusted
if required> Dual blade design> Self closing for safety> Latch locks tool closed for ease of use when performing
mid-span slitting preparation> Comfortable plastic grips> Made in the U.S.A.> Replacement Blade Part #: 80235 (2 required)> Kit Dimensions: 11.5 x 8.25 x 2.5 in. (292 x 210 x 63.5 mm)> Kit Weight: 2.04 lbs (925.3 g)> See table for part numbers
Kit Part # Guide Blocks Included80830 2.5/3.0/4.4 x 8.2 mm
80830-001 2.2/2.5/3.0 mm80830-002 1.8 / 2.2 / 2.5 / 3.0 / 3.3 mm80830-007 400 - 8.5 mm80830-008 3.0/3.5/5.0 mm80830-009 400 - 5.3 mm80830-010 400 - 6.0 mm80830-016 400 - 3.5 mm
80235-1 Replacement Blade (two blade package)80235-10 Replacement Blade (10 each)
400 SeRieS KiT - Fiber buFFer tube & drop Cable Slitter
89
> Precise one-step buffer tube scorer> Factory fixed hardened carbon steel blade requires no blade adjustment> Body made of strong resilient acetal polymer (FTS-005-Red, FTS - Yellow, FTS-035 - Blue)> Made in the U.S.A.> Dimensions: 3.75 x .625 in. (95.53 mm x 15.92 mm)> Weight: 1oz (28g)
Model # Buffer Tube Sizes Wall Thickness Part #
FTS-005 up to 2 mm(up to .079 in)
0.17 mm - 0.28 mm(0.007 in - 0.011 in)
80990
FTS 1.6 mm - 6.0 mm(0.062 in - .236 in)
0.25 mm - 0.4 mm(0.009 in - 0.015 in)
80980
FTS-035 1.6 mm - 6.0(0.062 in - .236 in)
1.0 mm - 1.3 mm(0.039 in - 0.051 in)
80985
FTS-005
FTS-035
FTS
FTS SeRieS - Fiber tube SCorerS
90
Fiber Optics
> Quality fiber optic scribes featuring a protective retractable barrel with pocket clip and a stainless steel mounted diamond tip in your choice of conical or wedge shapes
> These scribes are specially made for the “scratch and pull” technique of scribing optical fiber. The wedge shape provides a more durable edge
> Made in the U.S.A.
> Reversible 30 degree angled carbide blade edged on both ends to double the life of the tool
> 5 mm wide blade wider than conventional scribe blades for greater visibility
> “Soft feel” grip on rugged anodized aluminum casing> Hex-shaped end to prevent scribe from rolling off work table> Plastic cap protects blade when tool is not in use> Convenient pocket clip> Made in the U.S.A.> Carbide Blade Replacement Part #: 46122
Model Description Full Length Part #
DS-60-C 60° Cone Angle-Diamond Tip Retractable Scribe 5.375 in./137 mm 46137DS-90-W 90° Wedge-Diamond Tip Retractable Scribe 46140
> The CS-30-W is a 30-degree wedge-tip carbide scribe 3.8 mm wide for long life and simple fiber termination> Housed in a rugged, anodized aluminum casing 112 mm long and 8
mm in diameter, the CS-30-W fits comfortably in either hand and in your pocket or tool kit
> The CS-30-W includes a convenient pocket clip and soft, brightly colored, protective “Squeeze and Pull” cap for easy and quick tool selection
> Made in the U.S.A.Model Description Full Length Part #
CS-30-W 30° Wedge-Carbide Tip 4.375 in./112 mm 46124
Model Description Full Length Part #
CS-30-DE 3/16 in.(5 mm)
5-1/4 in.(133 mm)
46123
DS-60-C/DS-90-Wdiamond-tip Fiber optiC SCribe
CS-30-WCarbide-tip Fiber optiC SCribe
CS-30-Dedouble end Carbide Fiber optiC SCribe
91
> Designed for fiber cleaving applications that include field termination of fiber connectors and mechanical splices as well as laboratory applications> Small, lightweight and easy to use> Features a graduated leaf spring scale, which allows cleave lengths of 2.0 mm to 20.0 mm > The “Score and Snap” leaf spring function is easy, fast and is the preferred method by many fiber installers> Produces a precise cleave endface angle of less than 2 degrees> Supplied with a standard carbide cleaving blade capable of over 6,000 consistent cleaves> Cleaving tool is designed for single mode and multimode fiber with cladding O.D. diameter of 125 micron with no operator tool adjustments> Made in the U.S.A.> Cleaver Dimension: 4.88 x 0.79 x 1.57 in. (124 x 20 x 40 mm)> Weight: 2.12 oz (60g)
> Fiber Optic Cleaver: FOC-SS Part #: 46490
> Leaf Spring Replacement: FOC-LS Part #: 46492
> Carbide Blade Replacement: FOC-CBL, Bladelife scores – 6,000* Part #: 46491
> Diamond Blade Replacement: FOC-DBL, Bladelife scores – 10,000* Part #: 46493*Based on no damage or chipping to blade
> Small and lightweight design that is easily used in the lab or in the field> Provides ultimate reliability, repeatability and efficiency along with ease of use> Designed for single and multimode fiber with cladding diameter of 125 micron> Fiber coating diameters of 250 micron and 900 micron> Cleaved length- 6-20mm (250 micron) and 10-20mm (900 micron)> Provides 48,000 cleaves blade life (1,000 fibers x 3 heights x 16 positions) before blade replacement> Cleave angle capability provides a precise cleave end face angle of < 0.5 degrees> Cleaver supplied with Side Cover installed only (no Scrap Collection System – Scrap Box)> Convenient protective soft shell suede carrying case, and 1.5mm Hex Wrench provided> Made in China> Dimensions: 2.7 x 3.2 x 1.6 in (69 mm x 82 mm x 41mm)> Weight: 6.4 oz. (181 g)> Part#: 81010
FOC-SS - Fiber optiC Cleaver
FO-125 - preCiSion Cleaver
92
> Slim pen style 650 nm red visible laser diode fault locator for single and multimode fiber> Efficient and economical tool for fiber tracing, fiber routing, and continuity checking in an optical network, during, and after installation> Detects fiber breaks, fiber leaks, stress points and faulty connectors > Features a universal connector accepting any optical connector style with 2.5 mm ferrule such as FC, SC, ST, E2000, and APC> LED indicates function status, such as ON and OFF of laser, continuous laser mode, pulse laser mode, and low battery> Includes two 1.5V AAA batteries, cushioned vinyl carrying case, lense cap, and instruction sheet> Additional power button prevents accidentally activating the laser and draining the batteries> Average laser life is approximately 3000 hours> Maximum output power is 5 mW> Minimum coupled power is 0.5 mW> For single mode up to 7 km, for multi-mode up to 3 km> Laser class 3A> CE, RoHS compliant> FO-VFL without 1.25 mm Adapter (Part No. 80920); Made in China> FO-VFL with 1.25 mm Adapter included (Part No. 80910); Made in China> 1.25 mm Adapter Only (Part #. 80918); Made in Taiwan
> Precision quality stainless steel 6 in. (150 mm) ruler> Sliding clip for pocket attachment and depth gauge use> One ruler side indicates inches and mm and one side indicates 64th and mm conversions> Ideal addition for fiber kits as well as other specialty tool kits> Made in the U.S.A.> Weight: 1.0 oz (28 g)> Length: 6.4 in. (163 mm)> Part #: 80683
RMC-6 - ruler
FO-VFL - viSual Fault loCator
Fiber Optics
93
> Provides a high intensity, long-lasting RED LED light source that transmits light instantly and accurately down the fiber to a maximum range of 2 km
> New design provides a more economically priced tool over the original CCT-2001
> Provides a fast, efficient and low cost check of fiber continuity in the field> Use with both single mode and multimode fiber> Compatible with almost all types of connectors including ST, FC, SC,
LC and MT-RJ > Push button operation> Uses (3) each LR41 or AG3 batteries (included)> CE certified> ROHS Compliant> Made in China> 5 lumens, 60mW @ 30mA, 620-640nm> Part #: 81140
CCT-2 - Fiber Continuity teSter
> Available in magnification strengths of either 200x or 400x> Achromatic glass objective for excellent image quality> Focus wheel for proper focus at all times> Universal 2.5 mm adapter for nearly all ST, SC and FC connector ferrules
included as the standard adapter> Integrated laser safety filters (not intended for viewing lit fibers)> Coaxial Illumination by LED light giving up to 100,000 lamp hour life
and extended battery life> Side illumination port allows back lit inspection of jumpers and can be
used as a fault finder> Body of durable aluminum comes in soft padded storage case> Takes 3 AAA batteries (included)> Made in China> Length: 9 in. (230 mm) > Weight: 1.2 lbs (550 g) without case> 200x Part #: 80760> 400x Part #: 80761
FiBeR OPTiC iNSPeCTiON miCroSCope - 200x400x
94
Fiber Optics
> Removes outer jackets from 12 count fiber ribbons> Factory set, requires no adjustment> Prevents scratching or nicking of optical fibers> All cutting surfaces are precision formed, hardened, tempered and
ground> Tools for other fiber counts available upon request> Made in the U.S.A. > Length: 5.375 in (136.53 mm) > Weight: 2.5 oz (71 g) > Part #: 80745
> Easily inserts and extracts fiber optic connectors in high density patch panels> Works with LC and SC simplex and duplex connectors as well as MU, MT-RJ and other similar types> Tool tip design insures positive gripping without slipping> Spring loaded tool action and ergonomic grips allow easy, comfortable and precise left or right hand operation> Made in China> Dimensions: 8.75 in. x 2.75 in. x .75 in. (222.86 mm x 70 mm x 19.1 mm)> Weight: 3.49 oz (99 g)> Part #: 80860
FO-R12 - Fiber ribbon aCCeSS tool
ieT - inSertion/extraCtion tool
95
> For use in FTTH –MDU (Multiple Dwelling Units) as well as other riser cable applications> Preparation tool especially designed to shave a break-out window
in riser cable with no fiber damage while allowing individual fiber extraction
> Tool is compact and lightweight and has rugged aluminum body design
> Allows easy and fast access to closely spaced riser cables especially in small confined areas
> Compact and thin profile tool design allows for ease of use when riser cable is surface mounted, without the need for separating it from the mounting surface
> Shaves a longitudinal break-out window in 8.5 mm, 10.5 mm and 14 mm O.D. riser cables without any time consuming tool adjustment
> Factory fixed shaving blade made of high carbon steel is safely recessed away from installer’s hand to minimize exposure
> Call Customer Service for applicable cables U.S.: 860-635-2200 U.K.: +44-1384-400070> Made in the U.S.A.> Tool Dimensions: 4 in. x 1.5 in. x 5/8 in. (100 mm x 38 mm x 17 mm)> Weight: 3.68oz (105g)> Replacement Blade: Part No: 81320 includes 10 blades, two spare
mounting screws and washers> Part #: 81315
> Ratcheting action crimp tool for positive, full cycle crimping of fiber optic connectors> Rugged steel frame > Interchangeable jaws> Several common fiber optic hex and oval jaws available> Made of Taiwan and America parts> Engineered in the U.S.A.> Length: 8.6 in. (218 mm)> Weight: 1.1 lb (500 g)
With Set Jaw #
Part # Square Hex Sizes Oval Sizes
Jaw Set Only Part #
1 39840-1* .043 .068, .100, .137, .213, .255
39844*
2 39840-2** .042 .068, .078, .128, .151, .178
39845*
3 39840-3** .042 .068 .133, .162, .195
39842*
4 39840-4** .042 .068, .151, .178, .213
39843*
FiBeR OPTiC CRiMP TOOL
RBT - Fiber break-out tool
Cable Manufacturers Cable
Prysmian Verticasa
Acome PACE
Draka ezBREAKOUT™SILEC Indoor Sheath® MS
96
Fiber Optics
> Easily opens/separates the steel tape armor on fiber optic cable> Unique counter rotation mechanism opens steel tape armor in 2 1/2 – 3 1/2 turns allowing for cutting of the armor> Accomodates steel tape armor from 1–2 mm OD
> High quality hand polishing disc for fiber optic connectors> “Universal” design fits most 2.5 mm ferrule connectors including: ST,
SC and FC connectors> Inside and outside rims designed for improved hand positioning
while performing the polishing operation> Channeled, raised base allows debris to escape easily and provide
for easy polishing action> High quality, precision machined stainless steel design
for long life> Diameter: 1.94 in. (49.2 mm)> Weight: 1.5 oz (43 g)> FOPD-25 Part #: 80688; Made in the U.S.A.> FOPD-LC also available (aluminum disc for 1.25 mm
ferrule LC connectors) (Part #: 80754); Made in Taiwan> FS800 is 1.5 in. diameter plastic disc designed for most
2.5 mm ST, SC and FC connectors (Part #: 46167); Made in the U.S.A.
> FS900 is 1.5 in. diameter stainless steel disc for 2.5 mm connectors (Part #: 46169); Made in the U.S.A.
> Neodymium rare earth magnet holds tool halves together making operation easy> Tool totally heat treated for long life> Screw clamps are high-strength alloy steel> 1.5 in. (38.1 mm) outside diameter fits comfortably in your hand> Made in China> Dimensions: Diameter 1.5 in. x .82 in. (38.5 mm x 20.7 mm)> Weight: 9.0 oz (258 g)> Part #: 81161
FOPD-25
FS900FS800
FOPD-LC
STR - Steel tape remover
FOPD-25, FOPD-LC, FS800 FS900 - Fiber optiC poliShing diSC
97
Complete kit includes:> Clear Lexan® polishing plate> Neoprene polishing pad> Universal plastic polishing puck> Universal stainless steel polishing puck> 12 micron polishing film – 10 included> 3 micron polishing film – 10 included> .5 micron polishing film – 10 included> Lint-free cleaning wipes – 25 included> Pre-saturated bifurcated swipes – 10 included> Made in the U.S.A.
Model Description Dimensions Part #
PK2000 Fiber Optic Polishing KitComplete
L: 14-3/8 in. W: 9-1/2 in. D: 2-3/8 in365 mm x 241 mm x 60 mm
46277
FS600 Fiber Optic Polishing PlateLexan®
L: 13 in. W: 9in. D: 1/4 in330 mm x 229 mm x 6 mm
46163
FS700 Fiber Optic Polishing PadNeoprene
H: 5-1/2 in. W 5-1/2 in D: 1/8 in.140 mm x 140 mm x 3 mm
46165
FS800 Fiber Optic Polishing PuckPlastic Steel 2.5 mm
D: 1-1/2 in38 mm
46167
FS900 Fiber Optic Polishing PuckStainless Steel 2.5 mm
D: 1-1/2 in38 mm
46169
PFA0-5 Fiber Optic Polishing FilmAluminum Oxide 5 Micron
Color: White
3 in x 6 in.76 mm x 152 mm
46273
PFA0-3 Fiber Optic Polishing FilmAluminum Oxide 3 Micron
Color: Yellow
3 in x 6 in.76 mm x 152 mm
46275
PFA0-12
Fiber Optic Polishing FilmAluminum Oxide 12 Micron
Color: Red
3 in x 6 in.76 mm x 152 mm
46274
F1000 Fiber Cleaning Wipes 3 in x 4 in.76 mm x 101 mm
46143
FS400 Bifurcated Swipes 4-1/4 in108 mm
46161
FiBeR OPTiC POLiSHiNg KiT
98
Fiber Optics
> Fiber-Safe™ safety kit is specifically for working safely with glass fiber. > Complete kit includes a Fiber-Safe polishing / work mat, fiber scraps trash can, splinter removal tweezer, ten bifurcated cleaning swipes, each with a self-contained alcohol dispensing tube, and safety glasses.> Made in the U.S.A.> Kit items can also be purchased separately. See table for part numbers.
Model Description Dimensions Part #
FS9500 Fiber Optic Safety KitComplete
L: 16.5 in. W: 3.5 in. 419.1 mm x 88.9 mm
46171
FS100 Polishing/Work MatColor: Black
L: 22 in. W: 14 in. 46154
FS200S Fiber Scraps Trash Can H: 4.1 in. W: 2.6 in.104.14 mm x 66.04 mm
46157
FS300 Safety Glasses N/A 46159FS400 Bifurcated Swipes
(10 included)L: 5 in.
127 mm46161
FS500 Fiber Splinter Removal Tweezers
L: 4.25 in.107.95 mm
46162
> The Miller FCCT cleaner series by Ripley uses a mechanical dry cleaning design that provides fast and reliable cleaning to fiber connectors and adapters> FCCT-250 model designed for FC, SC and ST connectors and adapters > FCCT-125 model designed for LC and MU connectors and adapters> Cleaner provides 360 degree cleaning coverage with 800+ cleanings> Automatic feed provides a fresh section of lint free fabric after each use> Dust cover for full contamination protection of tool cleaning fabric> Tool body window indicator allows user to view remaining cleaning fabric> One single forward push action engages the cleaner with an audible “click” indicating that the cleaner is properly seated and cleaning is complete > Pull Out nozzle extends to a total length of 3.25 in. (82.55 mm) for easier access to compact adapter panels> Dimensions: 7 in. (177.8mm) X .68 in. (17.27mm) X .68 in.(17.27mm)> Weight: .896 oz. (25.4 g)FCCT-250 Part No.: 81592FCCT-125 Part No.: 81591
FiBeR-SAFe™ SAFeTy KiT
FCCT-250/FCCT-125 ConneCtor/adapter CleanerS
99
> Oval (Euro Style) container design with rectangular bottom for stability > Polypropylene Twist-lock pump provides leak-free seal for travel
and is ideal for use in a fiber kit > Use with isopropanol for proper cleaning of fiber during the cable preparation > One handed pump operationfrees up user’s hands > Made in the U.S.A.
> Container not supplied with liquid > Dimensions: 2.9 x 5.5 x 2.4 in. deep (74 x 140 x 61 mm deep)> Capacity 8 oz (250 ml)> Weight 1.8 oz (51 g)> Part #: 80870
> Square HDPE 4 oz (118 ml) container provides stability and offers stainless steel pump> Use with Isopropanol for proper cleaning of fiber during the cable preparation > One handed pump operation frees up user’s hands> Cam-lock hinge keeps lid open and closed to reduce odors> Pump design with purity protector prevents fluid from reentering the bottle> Each touch of the pump dispenses approximately 2cc of liquid > Made in the U.S.A.> Container is not supplied with liquid> Dimensions: 3.1 x 2.1 in. (79 x 54 mm)> Weight: 2.3oz (65g)> Part #: 80875
MDP-4 - miller diSpenSing pump
MDP-8 - miller diSpenSing pump
100
Electrical
> Designed for fast, safe, and precise jacket removal of PE, PVC, rubber, and other jackets> Fiber Optic cables - excellent tool for precise jacket stripping of fiber
optic multi-fiber cables> For smaller diameter cables: 0.178 to 1.14 in. (4.5 - 29 mm)> Rotary cut to a longitudinal cut along the cable length for end
stripping > Spiral cut for end stripping and mid-span stripping> Spiral cutting features provides easier removal of harder jackets> Spring-loaded cable brace firmly secures cable to the blade
for controlled cutting action > Comfort and ergonomic design for ease of use and storage> Long life blade design> Blade depth can be regulated by simply turning the blade housing > Blade housing is PTFE coated, for smooth,low effort stripping> Made in U.K.> Length: 5.43 in. (138 mm)> Weight: 3.5 oz (100 g)> Part #: 37140 > Replacement blade: CB231 (Part #: 37150)
> Designed for fast, safe, and precise jacket removal of PE, PVC, rubber, and other jackets> Fiber Optic cables - excellent tool for precise jacket stripping of
fiber optic multi-fiber cables> For larger diameter cables: 0.75 to 1.58 in. (19 to 40 mm)> Rotary cut to a longitudinal cut along the cable length for end
stripping > Spiral cut for end stripping and mid-span stripping> Spiral cutting features provides easier removal of harder jackets> Spring-loaded cable brace firmly secures cable to the blade
for controlled cutting action > Comfort and ergonomic design for ease of use and storage> Long life blade design> Blade depth can be regulated by simply turning the blade housing > Blade housing is PTFE coated, for smooth,low effort stripping> Made in U.K.> Length: 6.02 in. (153 mm)> Weight: 3.84 oz (110 g)> Part #: 37145 > Replacement blade: CB231 (Part # 37150)
RCS-114 - round Cable StripperS
RCS-158 - round Cable StripperS
101
> Cable stripper for outer jackets & insulations from 0.18 to 1.12 in. (4.5 to 28.5 mm) O.D.
> Stripping action is both circumferential, then longitudinal for removal of insulation section at the end or mid span of wires
> Note: Does not provide a Sprial Cutting feature> Adjustable depth up to 0.12 in. (3 mm) cutting depth> Spherical blade for softer insulation is standard; chisel point
blade for harder coverings is optional > Solid construction for rugged applications> Made in China> Stripping Capacity – 0.18 to 1.12 in. (4.5 to 28.5 mm) O.D. > Weight: 4.2 oz (120 g)> Dimensions: 5.3 x 1.6 x 0.6 in. (135 x 40 x 15 mm)
MK02> MK02 has handy spring-loaded hook ripping blade at base
of tool to facilitate insulation removal> MK02 Part #: 39390
MK02M> MK02M the same as the MK02 without the spring-loaded hook
ripping blade>MK02M Part #: 39490
Both> Replacement Blades for MK02 & MK02M: Spherical cutting blade (set of 5) – Part # 39391 Chisel point blade (set of 5) - Part # 39392
MK02/MK02M - Cable StripperS
102
Electrical
> Cable stripper for outer jackets & insulation on large diameter cables> Cable Size Range in O.D. 0.79 in. to 2.36 in. (20 to 52 mm)> Heavy duty construction for industrial environments> Rotary cut to a longitudinal cut along the cable length for end
stripping> Spiral cut for end stripping> Spiral cut for mid-span stripping> Spiral cutting feature provides easier removal of soft jackets and on
larger cables> Adjustable blade up to 0.20 inches (5 mm) cutting depth> Blade depth setting can be locked to assure consistent repetitive
operations> Roller support of cable for smooth stripping action> Wheel blade applications available – contact Customer Service for
sizes and applications > Made in China> Replacement Fixed Blade Assembly: Part#: 39379> Replacement Fixed Blade Cartridges (FC2) Part #: 39377 for larger
O.D. cable & (FC3) Part #: 39378 for smaller O.D. cable> Weight: 1.5 lbs (680 g)> Size: 3.7 x 1.7 (head) x 9.8 in. (95 x 42 x250 mm)> Part #: 39376
> Designed for precision cable stripping of a variety of insulation types including rubber, PVC, nylon and cotton> Wire Size: 0.31 in. ti 1.5 in (8 mm to 33 mm)> Adjustable blade depth up to 4.5 mm (0.18 in.) > Blade depth setting can be locked to assure consistent repetitive
operations> Adjustable hook head allows for variation in blade force for harder
materials> Stripping action is circumferential, longitudinal and spiral for
removal of jacket and insulation> Made in China> Replacement Blade: Part #: 39381> Weight: 159 g (5.6 oz) > Length: 163 mm (6.4 in.) closed> Part #: 39922
MK04 - Cable JaCket Stripper
MK01DA outer JaCket Cable Stripper
103
Model # Part # Sizesmm/AWG
721 80564 mm 0.6 0.8 1.0 1.3 1.6 2.0 2.6AWG 22 20 18 16 14 12 10
821 80568 mm 0.4 0.5 0.65 0.8 1.0 1.3AWG 26 24 22 20 18 16
921 44625 mm 0.25 0.32 0.4 0.5 0.6 0.8AWG 30 28 26 24 22 20
> AWG/mm wire sizes embossed/pad printed on tool> Cushion grips for comfort> Serrated plier-type nose for wire pulls and loops> Handle lock mechanism for compact and protective storage for ease
of use with pouch> Wire looping / bending holes conveniently located> Automatic return spring for ease of use and speed> Compact and lightweight with narrow nose design> Black oxide finish for extra corrosion protection> All cutting surfaces are precision formed, hardened, tempered and
ground, assuring clean, accurate strips> Made in China> Length: 6.25 in. (159 mm) > Weight: 3.8 oz (107.7 g)
821
721/821/921 - multi-Wire StripperS/CutterS
721
921
104
Electrical
> Strips and cuts insulated wire sizes from #22 AWG (0.65 mm) to #10 AWG (2.6 mm)> Cam adjusts easily to fit wire size> Pressure is against the cam not on the set screw> Opening spring and closing lock feature> Ideal for all applications> Ground and unground versions available> Soft plastic coated handles> Made in Taiwan> Length: 5.375 in. (136.53 mm)> Weight: 2.5 oz (71 g) > Model 103-S Part #: 80315> Model 103-S Part #: 80315-30 Ground Cutting Surface
> Strips and cuts insulated wire sizes from #22 AWG (0.65 mm) to #10 AWG (2.6 mm)
> Effective for stripping / scoring fiber optic jackets and buffer tubing> Stop screw adjusts easily to fit wire size> Ground and unground cutting surface versions available> Soft plastic coated handles> Made in Taiwan> Length: 5.125 in. (130.18 mm)> Weight: 2.5 oz (71 g)> Also available with opening spring and closing lock feature (Model #101-S)> Model 100 Part #: 80300> Model 100 Part #: 80300-30 Ground Cutting Surface> Model 101-S Part #: 80305> Model 101-S Part #: 80305-30 Ground Cutting Surface
With cam adjustment
103-S adJuStable Wire Stripper/Cutter
100 - adJuStable Wire Stripper
Cutter
105
> Effective for stripping & cutting insulated wire sizes from #22 AWG (0.65 mm) to #10 AWG (2.6 mm)> Scalloped handles ergonomically designed for ease of use and
optimum operator comfort > Patented mechanism allows for full range adjustment > Finger operated stop, adjusts easily for manual adjustment of jaws without additional tools> Unique spring mechanism holds the jaws and stripping surfaces in
a normally open position, permitting ease of operation in repetitive stripping applications
> Once set, the operating pressure is encapsulated between the cam and pivoting tool arm, allowing for maximum operator leverage
> All cutting surfaces are precision formed, hardened, tempered and ground assuring clean smooth strips
> Made in China> Length: 5.4 in. (137 mm)> Weight: 2.2 oz (62 g) > Part #: 80735
111-TAS - thumb adJuStable Wire Stripper/Cutter
106
Electrical
> Designed to handle PVC insulated small cross- sectional wires up to 1.5 mm2 (0.062 in.) > Lightweight and compact size ideal for small applications
> Ideal for production line and electronic / electrical maintenance applications
> Comfortable fatigue free shape> Fully self-adjusting with built-in wire cutter, adjustable length stop and variable gripping power > Strips wire without damage to conductor> Robust glassfiber reinforced nylon body with hardened and tempered steel moving component parts insures a long, maintenance free life > Made in China> Weight: 150 g (5.3 oz)> Dimensions: 180 x 70 x 18 mm (7.1 x 2.8 x 0.7 in.)> Part #: 39780
> Allows for precise work with less fatigue> Automatic, self-adjusting stripping action over entire range> Built-in strip stop for consistent strip lengths> Built-in cutter for wire end trimming> Supplied with interchangeable gripping pads to suit different types
of insulation> Made in China> Weight: 76 g (2.7 oz)> Dimensions: 155 x 80 x 14 mm (6.1 x 3.1 x 0.6 in.)> Part #: 39765> Replacement Gripping Pads (set of 3): Part #: 39398
Application Wire SizeRange mm2
Wire SizeRange O.D.
Appox.AWG Wire Size
Wire Stripping up to 1.5 up to 0.062 Stranded 34-16Solid 34-14
Wire Cutting up to 1.5 up to 0.062 Stranded 34-16Solid 34-14
Application Wire SizeRange mm2
Wire SizeRange O.D.
Appox.AWG Wire Size
Wire Stripping 0.08 to 6.00 up to 0.126 22-10Stranded & Solid
Wire Cutting Up to 6.00stranded Copper
up to 0.126 22-10Stranded & Solid
PS 2SelF-adJuSting Wire Stripper
PS 1 SelF-adJuSting Wire Stripper
107
> The premier precision wire stripper for removing insulation from solid or stranded wire without nicking or scratching the conductor
> Nominal conductor diameter range from .0050 to .044 in.> Tool hole diameter range from .008 to .054 in> Tool handle is stamped with identifying hole diameter> Made in the U.S.A.> Length: 5.375 in. (136.53 mm) > Weight: 2.5 oz (71 g)> See tables for part number
> Designed for high volume, production environments> Strips 0.25 mm2 to 2.5 mm2 PVC insulated wires> Wire Size Range: Up to 0.1 in. (0.25 to 2.5 mm2)
> AWG Wire Size: Stranded or Solid: Up to 14 AWG> Die cast aluminum frame and pressed steel linkages offer a
rugged design for production and field use> Automatic, self-adjusting stripping action over entire range> Additional flexibility to adjust for tough or soft insulations, with built-
in adjustment dial> Built in strip stop for consistent strip lengths> Made in China> Weight: 240 g (8.5 oz)> Dimensions: 165 x 64 x 16 mm (6.5 x 2.5 x 0.6 in. )> Part #: 39415> Replacement Stripping Jaw Assembly: Part #: 39416
MK 1F/D - Wire StripperS
NN - Wire StripperS
108
Electrical
AW
GW
ire
Co
nst
ruct
ion
No
min
alC
on
du
cto
rD
iam
eter
in.
No
min
alC
on
du
cto
rD
iam
eter
mm
Too
l Ho
leD
iam
eter
New
To
ol
Mo
del
#N
ew
Too
lP
art
#
Old
To
ol
Mo
del
#O
ld T
oo
lP
art
#
Old
To
ol
Co
lor
18So
lid.0
403
1.02
36.0
44N
N04
4W86
215
NN
044
4621
5D
ark
Bro
wn
Stra
nded
.044
1.11
76.0
54N
N05
4W86
217
NN
054
4621
7C
lear
20
Solid
.032
0.8
128
.034
NN
034W
8621
1N
N03
446
211
Pink
.812
8.0
37N
N03
7W86
213
NN
037
4621
3G
rey
Stra
nded
.035
.889
.037
NN
037W
8621
3N
N03
746
213
Gre
y
.889
.044
NN
044W
8621
5N
N04
446
215
Dar
k B
row
n
22
Solid
.025
3.6
4262
.028
NN
028W
8620
6N
N02
846
206
Bla
ck
.642
62.0
31N
N03
1W86
209
NN
031
4620
9Ta
n
Stra
ndad
.028
.711
2.0
31N
N03
1W86
209
NN
031
4620
9Ta
n
.711
2.0
34N
N03
4W86
211
NN
034
4621
1Pi
nk
24
Solid
.020
1.5
11.0
23N
N02
3W86
202
NN
023
4620
2M
aro
on
.511
.025
NN
025W
8620
4N
N02
546
204
Lig
ht G
reen
Stra
nded
.022
.558
8.0
25N
N02
5W86
204
NN
025
4620
4Li
ght
Gre
en
.558
8.0
28N
N02
8W86
206
NN
028
4610
6B
lack
26
Solid
.015
9.4
04.0
18N
N01
8W86
198
NN
018
4619
8Y
ello
w
.404
.021
NN
021W
8620
0N
N02
146
200
Roya
l Blu
e
Stra
nded
.017
.431
8.0
21N
N02
1W86
200
NN
021
4620
0Ro
yal B
lue
.431
8.0
23N
N02
3W86
202
NN
023
4620
2M
aro
on
Ordering Guide for NN Wire Strippers
Note: NN Wire Strippers replace the No Nik Strippers that are no longer available.
109
AW
GW
ire
Co
nst
ruct
ion
No
min
alC
on
du
cto
rD
iam
eter
in.
No
min
alC
on
du
cto
rD
iam
eter
mm
Too
l Ho
leD
iam
eter
New
To
ol
Mo
del
#N
ew
Too
lP
art
#
Old
To
ol
Mo
del
#O
ld T
oo
lP
art
#
Old
To
ol
Co
lor
28
Solid
0.12
6.3
20.0
14N
N01
4W86
194
NN
014
4619
4D
ark
Gre
en
.320
.016
NN
016W
8619
6N
N01
646
196
Ora
nge
Stra
ndad
.014
.355
6.0
16N
N01
6W86
196
NN
016
4619
6O
rang
e
.355
6.0
18N
N01
8W86
198
NN
018
4619
8Ye
llow
30
Solid
.010
0.2
54.0
12N
N01
2W86
192
NN
012
4619
2W
hite
.254
.014
NN
014W
8619
4N
N01
446
194
Dar
k G
reen
Stra
nded
.011
.279
4.0
14N
N01
4W86
194
NN
014
4619
4D
ark
Gre
en
.279
4.0
16N
N01
6W86
196
NN
016
4619
6O
rang
e
32
Solid
.008
0.2
032
.010
NN
010W
8619
0N
N01
046
190
Lig
ht B
lue
.203
2.0
12N
N01
2W86
192
NN
012
4619
2W
hite
Stra
ndad
.009
.228
6.0
10N
N01
0W86
190
NN
010
4619
0Li
ght
Blu
e
.228
6.0
12N
N01
2W86
192
NN
012
4619
2W
hite
34So
lid.0
063
.160
.008
NN
008W
8618
8N
N00
846
188
Red
.160
.010
NN
010W
8619
0N
N01
046
190
Lig
ht B
lue
Stra
nded
.007
.177
8.0
10N
N01
0W86
190
NN
010
4619
0Li
ght
Blu
e
36So
lid.0
050
.127
.008
NN
008W
8618
8N
N00
846
188
Red
Stra
nded
.006
.152
4.0
08N
N00
8W86
188
NN
008
4618
8Re
d
Ordering Guide for NN Wire Strippers
Note: NN Wire Strippers replace the No Nik Strippers that are no longer available.
110
Electrical
> Cuts stranded wire from #22 AWG (.65 mm) to #12 AWG (2.3 mm)> Utility cutter for plastic, wire and other materials> Perfect for plastic cuffs> Spring mechanism opens tool permitting ease of operation in repetitive
functions> All cutting surfaces are precision formed, hardened, tempered and
ground> Closing lock feature> Soft plastic coated handles> Made in Taiwan> Length: 5.375 in. (136.53 mm)> Weight: 2.5 oz (71 g)> Part #: 80365
> Heads matched to wire diameter> Used by major telephone installers> Slitting and stripping blades are replaceable> Tools are self-closing for safety> Soft plastic coated handles> Made in the U.S.A.> Length: 7 in. (177.80 mm)> Weight: 9.5 oz (269 g)
Model Part # Wire Diameter Replacement Blade
Replacement Blade Part #(in.) (mm)
205 14GA 80250 .062 1.57 205SL BL (Slitting Blade)205ST BL (Stripping Blade)
80235*80236-1
205 12GA 80238 .080 2.03 205SL BL (Slitting Blade)205ST BL (Stripping Blade)
80235*80236-4
* Made in Korea
60 - utility Cutter
205 - rural “C” line Wire Slitter & Stripper
111
> Messenger removal and jacket slitting tools for round figure-8 aerial duct> Heads matched to messenger sizes> Self closing for safety> Locking latch on MJ and MW tools provides easier slitting action> Replaceable blades > Plastic Grips on handles> Made in the U.S.A.> Length: 6.5 in. (165 mm)> Weight: 9.0 oz (255 g)
Model # Part # Duct
Mfr
Nominal
Duct
Messenger
Size - mm
Maximum
Messenger
Covering
O.D. - in.
Replacement
Blade
Blade
Part #
305 AN 80255 - - .380 - 420 305 BL 80235
305 WEB-B 80260 - - .435 - .450 305 BL 80235
305-6MW-P6 80631 Pyramid 6.6 .400 305 Hook 80244
305-6MW-D6 80241 Duraline 6.6 .450 305 Hook 80244
Model # Part # Duct
Mfr
Nominal
Duct
Messenger
Size - mm
Maximum
Messenger
Covering
O.D. - in.
Replacement
Blade
Blade
Part #
305-6MJ-P6 80640 Pyramid 6.6 .400 305 MJ 80639
305-6MJ-AD6 80240 Duraline,Amco
6.6 .450 305 MJ 80639
Models for Messenger Jacket Slitting(Slits Messenger Jacket for Removal)
305 - Figure 8 aerial SelF Support duCt Slitting
112
Electrical
> Multi-purpose service tool> All exterior surfaces and interior blade surfaces double-plated
with chrome over nickel to prevent rust and corrosion — the ONLY electrician’s scissors that offer this full double protection
> Every pair totally thru-hardened for years of service.> Use for splicing wire; cutting harness ties, insulation materials,
medium gauge wires, and electrical tape; and stripping insulation.> Stripping notches for 19 and 23 gauge wire> Scraper and file on back of blade> Made in the U.S.A.> Length: 5.25 in (133 mm)> Weight: 3.2 oz (91 g)> Part #: 46043
> ERGO Scissors have the same quality features as 925CS > Ergonomic design to minimize hand wrist fatigue > Cushioned handle that nests in the palm of your hand for greater cutting leverage> Made in the U.S.A. > Length: 7.5 in. (190 mm) > Weight: 3.7 oz (110 g)> Part #: 46046
925CS - SpliCer’S SCiSSorS
925CS - eRgO - SpliCer’S SCiSSorS
113
> Complete Kit Contains: 1 – CSH 96 Holster 1 – 925CS Splicer’s Scissors 1 – CK6 Knife> Made in the U.S.A.> Kit Dimensions: 8.25 x 2.125 x 1 in. (210 x 54 x 2.54 mm)> Weight: 7.5oz (213 g)> Part #: 46044
> Tough, coping-style blade> Forged steel> Full-Size, high-dielectric, yellow-cushioned handle> Provided with a protective blade sheath> Made in the U.S.A.> Length: 6.25 in. (159 mm)> Blade length: 1.625 in. (41 mm)> Weight: 2.4 oz (68 g)> Part #: 46112
Model # Part # Description FullLength
Length of Cut
925CS 46043 Stripping notches 19 & 23 AWG and one blade serrated
5 in.(127mm)
1.75 in.(44 mm)
925CS-ERGO 46046 Same as 925CS except with ERGO handles
5 in.(127mm)
1.75 in.(44 mm)
CK6 46112 Slicer’s Knife 6.25 in.(159 mm)
N/A
925CS Kit 46044 One 925CS Scissor, One CK6 Splicer’s Knife and One CSH96
Holster
8.5 in.(216 mm)
N/A
CK6 - SpliCer’S kniFe
925CS - SpliCer’S SCiSSorS
114
Electronics
> Precision crafted tools > Perfect for military spec work> Used for cutting harnesses, assembling circuit boards,
cutting and tieing laces, and trimming wire for terminals> Needle-sharp points for accuracy and delicate trimming in
tight places> Hot-forged fine cutlery steel, double-plated with chrome
over nickel, tempered and precision ground for the finest performance
> IS4 1/4 is a precise instrument with long blades and needle-sharp points for stripping shielding, and cutting light wire for shim stock. High leverage for extra cutting power
> 33 1/4 is a high leverage scissor with delicate, extra sharp, curved blades
> 384 and 385 have the same features, but vary in overall length and length of cut
> 554 has snub-nosed, curved blades, and long, strong handles for cutting wire and filament in limited clearance areas
> 564C has one blade serrated to prevent slip-out> Made in the U.S.A.> See table for part numbers
Model # Part # FullLength
Length of Cut
IS4 1/4 46333 4-1/4 in.(108 mm)
3/4 in.(19mm)
33 1/4 (Curved Blades) 46332 3-1/4 in.(83mm)
1/2 in.(13mm)
384 46337 4 in. (102 mm)
1-1/4 in.(32 mm)
385 46338 5 in. (127 mm)
1-1/2 in.(38 mm)
564C (one blade serrated) 46334 4 in.(102 mm)
3/8 in.(10 mm)
IS4 1/4
384
554
564C
33 1/4
SPeCiALTy SCiSSORS
115
> AA-SA — Strong, fine tips. General purpose tweezer popular for assembly line work. Anti-acid/anti-magnetic stainless steel. Brushed satin finish.> 5SA — Needle sharp tips. Excellent for die attaching, wire
bonding, and handling miniature parts. Anti-acid/anti-magnetic stainless steel. Brushed satin finish.
> 7SA — Extra fine curved tips for working on miniature assemblies. Curved tips allow hand to rest on work surface for support, which means greater accuracy with less fatigue. Anti-acid/anti-magnetic stainless steel. Brushed satin finish.
> 7C — Same design as the 7SA but made of carbon steel. Chrome plated for extra protection.
> 231 — General purpose assembly tweezer with serrated inside points. Anti-acid/anti-magnetic stainless steel. Brushed satin finish.
> 226 — Same design and serrated points as the 231 but made of carbon steel. Chrome-plated for added protection
> Made in the U.S.A.> Weight: 7 oz (198 g)
Model # Part # FullLength
AA-SA 46056 4-7/8 in.(124 mm)
5-SA 46029 4-1/4 in.(108mm)
7-SA 46034 4-1/2 in. (114 mm)
7C 46032 4-1/2 in. (114 mm)
231 46011 4-3/4 in. (121 mm)
226 46009 4-3/4 in. (121 mm)
AA-SA
7C
5SA
7SA
231
226
TWeezeRS
116
Electronics
> AW Series: Bullet-shaped head grips conductor, supports insulation> AWG Series: L-shaped head affords greater visibility.
Works well in tightly confined solder areas> Precision-made from non-fatiguing copper alloy> Fully chrome-plated for extended life and solder-free
operation> Heads drilled to precise tolerances for positive conductor
contact and maximum thermal conductivity> Insures compliance with military and NASA specifications
on inspection requirements of solder connections when used properly
> Reverse action automatically grips conductor> Part numbers give correct AWG size wire that tools are
made to fit> Meets all specifications for soldering both single and
multi-strand wire> Made in the U.S.A.> Weight: 7 oz (198 g)
Model # Part # Full Length
ConductorContact Length
HoleDiameter
AW 18 46059 5 in. (127 mm) 1/16 in (1.59 mm) .046 - .047 in. (1.17 - 1.19 mm)
AW 20 46061 5 in. (127 mm) 1/16 in (1.59 mm) .035 - .036 in. / .89 - .91 mm
AW 22 46063 5 in. (127 mm) 1/16 in (1.59 mm) .028 - .029 in. / .71 - .74 mm
AW 24 46065 5 in. (127 mm) 1/32 in. (.79 mm) .022 - .023 in. / .56 - .58 mm
AW 26 46067 5 in. (127 mm) 1/32 in. (.79 mm) .017 - .018 in. / .43 - .46 mm
AW 28 46069 5 in. (127 mm) 1/32 in. (.79 mm) .012 - .014 in. / .30 - .36 mm
AW 30 46071 5 in. (127 mm) 1/32 in. (.79 mm) .010 - .011 in. / .25 - .28 mm
AWG 18 46073 4-1/2 In. (114 mm) 1/16 in. (1.59 mm) .046 - .047 in. / 1.17 - 1.19 mm
AWG 20 46076 4-1/2 In. (114 mm) 1/16 in. (1.59 mm) .035 - .036 in. / .89 - .91 mm
AWG 22 46179 4-1/2 In. (114 mm) 1/16 in. (1.59 mm) .028 - .029 in. / .71 - .74 mm
AWG 24 46082 4-1/2 In. (114 mm) 1/32 in. (.79 mm) .022 - .023 in. / .56 - .58 mm
AWG 26 46085 4-1/2 In. (114 mm) 1/32 in. (.79 mm) .017 - .018 in. / .43 - .46 mm
AWG 28 46087 4-1/2 In. (114 mm) 1/32 in. (.79 mm) .012 - .014 in. / .30 - .36 mm
AWG 30 46089 4-1/2 In. (114 mm) 1/32 in. (.79 mm) .010 - .011 in. / .25 - .28 mm
AW Series
AWG Series
AW/AWg - anti-WiCking toolS
117
> C
omplete range of professional quality desoldering tools for solder
removal
> Tools feature PTFE or silicon rubber nozzles (see below
)>
Extraction springs located outside the vacuum cham
ber to prevent solder sticking and prom
ote long life>
Anti-static gun versions feature carbon im
pregnated tips and polished
aluminum
bodies to provide conduction from the desoldering point
through to the operator (some plastic bodies, see below
)>
Mad
e in China
Pro
du
ct/Part #
Body Aluminum
Body Plastic
Anti-Static
Nozzle PTFE
Nozzle Silicone Rubber
A. Dimensions (mm)
B. Dimensions (mm)
C. Dimensions (mm)
D. Dimensions (mm)
E. Dimensions (mm)
Weight (g)
Spare Nozzles
(x5)
Neoprene Washers (x10)
DSG
PRM
587 (39455)X
190
2020
31.5
5639503
29512
DSG
587 AS (39467)
XX
X190
20 20
31.5
5639505
29512
DSG
59802 AS (39459)
XX
X154
1415.5
31.5
3539504
39514
VALU
VAC 574 A
S (39461)X
XX
18426
203
1.539
39508
FLEXIVA
C 2006 (39463)
XX
X206
2630
52
4239506
FLEXIVA
C 2009 (39466)
XX
X198
2630
52
6039506
39459DSG MINI AS 59802MIni Antistatic De-soldering Tool
39455DSG PRM De-soldering Toolfitted with micronozzle
39467DSG 587 ASThe antistatic version of the DSGPRM
39461VALUVAC 574 ASBlack antistatic plastic bodied VAL-U-VAC with PTFE nozzle
39463FLEXIVAC 2006Black plastic bodied VAL-U-VAC with the flexi nozzle
39466 FLEXIVAC 20093 position antistatic FLEXIVAC with the flexi nozzel
DeSOLDeRiNg gUNS
118
Electronics
> Cushioned surface protects delicate assemblies and expensive work surfaces > Make small parts handling easier and quicker> Inexpensive and disposable> Anti-static and free from contamination> Depress easily to give tools a sure grip on parts> Backing is non-slip, even on smooth glass> Will not put carbon into the atmosphere> Can be cleaned with soap and water without affecting their
anti-static quality> Available in two sizes of mats or rolls> Surface restivity 1010 - 1011 ohms/sq> Meets DOD-STD-1686 for anti-static material> Meets DOCFF1-70 test for flammability> Made in U.S.A.
Model # Part # Size Packaging
M11 White 46180 11 in. x 14 in.(279 mm x 356 mm)
Single
M14 White 46183 14 in. x 22 in.(356 mm x 559 mm)
Single
R22 White 46281 22 in. Width(559 mm)
180’ (55 m) per roll
SOFTy® ANT-STATiC DiSPOSABLe
WORK MAT
119
> Perfect for precision assembly work> Ideal for mechanics, technicians and hobbyists> Spring closing action holds parts so they don’t slip during assembly> Soft plastic coated handles> Made in the U.S.A.> Length: 9.25 in. (234.95 mm)> Handle Width: 5.1 in., 130 mm> Tip Width; .25 in. (6.35 mm)> Weight: 77 g, 2.7 oz> Part #: 80285
> ESD Safe and ergonomic slip free dual-compound thermoplastic grips for maximum comfort and durability> Smooth wide jaws for fine assembly applications s> Drop-forged, hardened and tempered steel alloy, designed for
maximum strength and performance> Pliers are suitable for work on ESD work stations in accordance with IEC 61340-5-1 surface resistance 106 - 109 ohms/sq> Made in Germany> See table for part numbers
Model Part # Weight Length
RFNP-SShort Nose Pliers
46475 2.2 oz (61 g) 5.1 in (130 mm)
RFNPLong Nose Pliers
46474 3.1 oz (89 g) 5.7 in (145 mm)
RFNP/RFNP-S - Flat noSe plierS
85 - long noSe plierS
120
Telecom
> Crimps RJ10, RJ11, RJ12, RJ22 and RJ45 modular connectors (4P, 6P, 8P)> Comfortable and ergonomic plastic grips> Wire cutter and jacket stripper built into tool body> Easy release ratcheting mechanism for ease of assembly> Ratchet mechanism can be released mid-cycle> Made in Taiwan> Length: 7-3/4 in. (197 mm)> Weight: 12 oz (340 g)> Part #: 80756> Replacement Blades: Part #: 80757
> This spring-loaded adjustable, automatic impact tool is used for terminating wires on 110/88 or 66 – type connecting blocks> Precision hardened and interchangeable blades spread the
termination prongs to allow fast and easy insertion of the wire into the contact, providing a tight termination that resists corrosion. The blade finishes the job in the same motion by neatly cutting off excess wire
> Accepts a variety of interchangeable blades> No screwdriver is needed to change the blades> The impact of the blade can be adjusted simply by turning a thumb
wheel> Convenient storage compartment with a unique locking mechanism
provides storage for spare blades> Made in Taiwan> Length: 5.75 in. (146 mm)> Weight: 5.1 oz (145 g)> Part #: 46271> Replacement Blades: 110/88 Part #: 46268: 110/66 Part #: 46269
PDT - punCh doWn tool
RJC - rJ Crimping tool
121
> Crimps British Telecom 630A/631A modular connectors> Crimps RJ11, RJ12 & RJ 45 connectors> Comfortable and ergonomic plastic grips> Wire cutter and jacket stripper built into tool body> Easy release ratcheting mechanism for ease of assembly> Ratchet mechanism can be released mid-cycle> Replacement Blades (package of 2) Part No: 80757> Length: 197 mm (7-3/4 in)> Weight: 340 g (12 oz)> Made in Taiwan> Part #: 40000
> Versatile and compact tool suitable for all types of standard insulation
> Smart-Strip produces an accurate depth of cut to any standard insulated size of wire or cable in the 0.03 to 0.39 in. (0.75 - 10 mm) range> Strips UTP & STP data network cable> Detailed depth adjustment mechanism allows the operator to
change settings across standard insulations and a variety of delicate and irregular shielded multicore cables
> Spring loaded action> Fixed depth version also available> Made in China> Weight: 1.4 oz (40 g)> Dimensions: 3.8 x 0.75 x 1.5 in. (97 x 19 x 38 mm)> Part #: 39470
BTC - bt/rJ Crimping tool
SMART-STRiP - data Cable Stripper
122
Telecom
> LDT-UTP is used for stripping the jacket on CAT5, CAT5E and CAT6 UTP/STP cables> Molded blade cassette ensures precise jacket stripping with no nicking/scoring of the twisted pair conductors> Factory pre-set cassette blades require no adjustment by the installer> Note: Tool is not intended for Plenum Series Cable construction> Made of Chinese and American Parts> Engineered in the U.S.A.> Length: 4 in. (102mm) > Weight: 0.8 oz (23g) > Part #: 42688
> DDT-UTP combo design is used for stripping the jacket on CAT5, CAT5E, CAT6 and the larger O.D. 10G types of UTP/STP cables> Molded blade cassette ensures precise jacket stripping with no nicking/scoring of the twisted pair conductors> Factory pre-set cassette blades require no adjustment by the installer> DDT combo model reduces the number of tools required to prepare various sizes of twisted pair (UTP/STP) cable> Note: Tool is not intended for Plenum Series Cable construction> Made of Chinese and American Parts> Engineered in the U.S.A.> Length: 3.63 in. (92mm) > Weight: 2 oz (57g) > Part #: 42452
LDT-UTP - utp JaCket trimmer
DDT-UTP - utp JaCket trimmer