APPLICATIONS ■ Deepwater and shallow-water offshore
exploration ■ Clastic and carbonate reservoirs ■ Unconventional resource plays ■ Enhanced oil recovery operations ■ CO2 sequestration projects
BENEFITS ■ Enables higher-resolution vertical
transverse isotropy (VTI) velocity models and associated images
■ Generates a shallow velocity structure for use in multiple-suppression algorithms
■ Maps changes in stratigraphy to improve planning of offset wells and laterals
■ Optimizes placement of production and injection wells
■ Improves fluid detection in carbonate reservoirs
FEATURES ■ Extends full-waveform inversion from
surface to borehole seismic data ■ Directly estimates five elastic rock
properties from vertical seismic profile (VSP) data
■ Requires no advanced processing, imaging, or inversion workflows
■ Complements traditional 3D VSP and walkaway VSP processing
■ Provides a new tool for estimating VTI anisotropy parameters
■ Delineates sand stringers with low compressional impedance contrast
■ Models changes in velocity directly related to CO2 , steam, or water injection
■ Assists with borehole calibration of surface seismic data
Apply elastic full-waveform inversion to borehole seismic dataSchlumberger integrates proprietary advanced workflows for 3D borehole seismic survey design, acquisition, processing, and interpretation to provide operators with high-resolution subsurface images and critical formation properties. The result is improved oil and gas reservoir characterization, modeling, targeting, monitoring, and, ultimately, production.
Elastic full-waveform inversion (FWI) is a new borehole seismic application that provides direct estimates of elastic rock parameters—compressional- and shear-wave velocities (Vp and Vs, respectively), density, and Thomsen’s epsilon and delta—from minimally processed 3D VSP and walkaway VSP recordings.
Although acoustic FWI algorithms have been applied successfully to surface seismic data to obtain more accurate formation properties, now Schlumberger can apply elastic FWI to borehole seismic data.
Obtain accurate parameters with complex processing Typically, obtaining accurate estimates of elastic rock properties from surface or VSP data requires long, complicated processing, imaging, and inversion workflows involving wave separation, deconvolution, model building, and migration. Traditional approaches include various trace inversions, simultaneous inversions, or joint inversions of prestack and poststack seismic data.
Advanced elastic FWI simplifies the process by extracting formation parameters directly from VSP data. The only processing involved is noise reduction and rotation of the 3D data to the
Synthetic traces (right) generated during elastic FWI match with the real data (left). This is an excellent QC of the inver-sion. The synthetic data should replicate all the wave modes seen on the real data.
Elastic Full-Waveform InversionElastic rock properties from borehole seismic data
Dept
h, m
Dept
h, m
Dept
h, m
Dept
h, m
400
500
600
700
800
900
1,000
1,100
1,200
1,300
1,400
1,500
1,600
1,700
1,800
1,900
2,000
400
500
600
700
800
900
1,000
1,100
1,200
1,300
1,400
1,500
1,600
1,700
1,800
1,900
2,000
400
500
600
700
800
900
1,000
1,100
1,200
1,300
1,400
1,500
1,600
1,700
1,800
1,900
2,000
400
500
600
700
800
900
1,000
1,100
1,200
1,300
1,400
1,500
1,600
1,700
1,800
1,900
2,000
Vertical (real) Vertical (synthetic)
Horizontal (real)O�set 1,050 m
Horizontal (synthetic)
Time, s Time, s
Time, s Time, s0.4 0.6 0.8 1 0.4 0.6 0.8 1
Well
Initial Initial Initial
Results Near the WellResults Near the Well
δ: FWI resultε: FWI resultρ (g/cm3): FWI result
Dept
h, m
Dept
h, m
Distance, mDistance, m Velocity, m/s Velocity, m/s
SonicInitialFWI
SonicInitialFWI
0
100
200
300
400
500
600
700
800
900
1,000
1,100
1,200
1,300
1,400
1,500
1,600
1,700
1,800
1,900
2,000
0
100
200
300
400
500
600
700
800
900
1,000
1,100
1,200
1,300
1,400
1,500
1,600
1,700
1,800
1,900
2,000
0
100
200
300
400
500
600
700
800
900
1,000
1,100
1,200
1,300
1,400
1,500
1,600
1,700
1,800
1,900
2,000
0
100
200
300
400
500
600
700
800
900
1,000
1,100
1,200
1,300
1,400
1,500
1,600
1,700
1,800
1,900
2,000
0
100
200
300
400
500
600
700
800
900
1,000
1,100
1,200
1,300
1,400
1,500
1,600
1,700
1,800
1,900
2,000
0
100
200
300
400
500
600
700
800
900
1,000
1,100
1,200
1,300
1,400
1,500
1,600
1,700
1,800
1,900
2,000
0
100
200
300
400
500
600
700
800
900
1,000
1,100
1,200
1,300
1,400
1,500
1,600
1,700
1,800
1,900
2,000
FWI Result for VSFWI Result for VP
1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000
1.9 2 2.1 2.2 2.3 2.4 2.5 2.6 2.7 0 0.05 0.1 0.15 0.2 0.25 0. 0 0.05 0.1 0.15 0.
1,500Initial VSInitial VP
VP VS
2,000 2,500 3,000 3,500 4,000 4,500 5,000
–400 –300 –200 –100 0 100 200 300 400
–400 –300 –200 –100 0 100 200 300 400 –400 –300 –200 –100 0 100 200 300 400 –400 –300 –200 –100 0 100 200 300 400
–400 –300 –200 –100 0 100 200 300 400 1,0002,000 3,000 4,000 5,000 6,000 2,000 3,000
Copyright © 2014 Schlumberger. All rights reserved. 14-PT-0207
inline, crossline, and true vertical orientations. By removing the processing and imaging steps, velocity models more accurately represent the underlying geology, enabling geoscientists to delineate finer stratigraphic features.
Elastic FWI uses elastic wave equations in anisotropic VTI media to model wave propagation, minimizing the misfit between modeled and real data by repeatedly updating model parameters. The technique requires two inputs: a 2D source line from land or marine VSP data, and a smoothed version of the borehole-calibrated VTI model generated from well data. The 2D source line may come from a walkaway VSP, or can be extracted from a 3D VSP.
First, forward-modeled data are saved as synthetic seismograms. Then, the elastic FWI algorithm performs a simultaneous inversion for the source wavelet and five elastic rock properties—Vp , Vs , density, epsilon, and delta. The model is continuously updated until synthetics match the real data. In this manner, elastic FWI generates high-resolution 2D profiles. It is possible to invert for the source wavelet, an important consideration in land work.
Elastic Full-Waveform Inversion
slb.com/pts
Resolve finer geologic details, improve field operationsElastic FWI is more accurate than the acoustic inversion schemes commonly used on surface seismic data. It produces profiles of formation properties with much higher resolution than conventional imaging. The technique can recover geologic features not resolved on standard VSP images. By extracting anisotropy profiles around the well, it provides calibration points for surface seismic imaging and supports other methods of estimating anisotropy.
In unconventional resource plays, more accurate elastic parameters can enable operators to map high-resolution changes in rock heterogeneity to improve offset and horizontal well planning.
In EOR and CO2 sequestration projects, elastic FWI can provide a direct, more quantifiable look at changes in Vp and Vs due to CO2, steam, or water injection. In carbonate reservoirs, elastic FWI can identify subtle changes in stratigraphy and improve fluid detection. Reservoirs that are difficult to detect, such as thin channel sands with low compressional impedance contrast, may be detected using another elastic property.
In deepwater exploration, many operators depend on complicated processing schemes to estimate Vp and Vs to calibrate pore pressure predications.
Elastic FWI Vp and Vs profiles from a well in the Horn River basin in British Columbia, Canada. The white circles are the VSP receivers, the black curves are the sonic Vp and Vs responses, and the blue curves are the inverted Vp and Vs responses at the well location. The inversion produces an excellent tie at the wellhead. Fine details seen in the logs are captured in the property profiles.