Download - EFNI (ACT) - MoP - MobileCEM Labs_v3.0
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
1/49
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
2/49
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
3/49
Mobile CEM LabsProprietary
3
Pre-Requisites
Save the Below folder on theComputer and UNZIP the folder
motochopper.zip
It can be downloaded from the
following locationwww.dropbox.com
username: [email protected]
Password: infoNow
Folder Path : Support -> Software
Make sure your phone is 60%charged
Enable/Select the USB Debugging
in Settings > Developer Option on yourdevice before connecting yourdevice to computer
Technology * Benchmarking *Consulting
Go to Top
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
4/49
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
5/49
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
6/49
Mobile CEM LabsProprietary
6
Step 1 Install Drivers
Use USB Cable to connect your device to computer
Let the device install its driver on your computer
If Not, Then Run .exe file ofSamsung_USB_Driver_for_Mobile_Phones_v1.5.14.0.exe
It can be downloaded from the following locationwww.dropbox.com
username: [email protected]
Password: infoNow
Folder Path : Support -> Software Follow the Install Shield Wizard to finish the installation on
your Computer
Technology * Benchmarking *Consulting
Go to Top
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
7/49
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
8/49
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
9/49
Mobile CEM LabsProprietary
9
And your device will be rooted.
Technology * Benchmarking *Consulting
Rooting Continued
Go to Top
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
10/49
Mobile CEM LabsProprietary
10
If you see SuperSU in your app drawer on the device,
your device is rooted.
Technology * Benchmarking *Consulting
Rooting Continued
Go to Top
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
11/49
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
12/49
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
13/49
Mobile CEM LabsProprietary
13
Procedure
Technology * Benchmarking *Consulting
1) Download the attached file (Root_for_ATTSG4_FM3.rar) from Dropboxwww.dropbox.com
username: [email protected]: infoNowFolder Path : Support -> Software2) Extract and put it into the EXTERNAL microSD. (You can do the extraction
using WinRAR or7-zip).3) Disconnect the Phone and Put the SD card back to the phone4) Download the Android Terminal Emulator app from Playstore
5) Open the Terminal Emulator app and run below 3 commands:
cd /mnt/extSdCard
./pwn
./script.sh
Go to Top
http://www.rarlab.com/download.htmhttp://www.7-zip.org/download.htmlhttps://play.google.com/store/apps/details?id=jackpal.androidtermhttps://play.google.com/store/apps/details?id=jackpal.androidtermhttp://www.7-zip.org/download.htmlhttp://www.rarlab.com/download.htm -
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
14/49
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
15/49
Mobile CEM LabsProprietary
15
Root Indicator on ACT app
Technology * Benchmarking *Consulting
Make sure the device is rooted.The top bar notifies you if the
device is rooted or not.
If device is not rooted, pleasefollow the procedure above.
Go to Top
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
16/49
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
17/49
Mobile CEM LabsProprietary
17
Applications installation
MoP shared separately
Technology * Benchmarking *Consulting
Go to Top
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
18/49
Technology * Benchmarking *Consulting
LTEBand Lock Feature
Go to Top
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
19/49
Mobile CEM LabsProprietary
19
Steps for Band Locking only for LTE
Technology * Benchmarking * Consulting
Go to Top
Click on theBandLock Tab toperform Band
Locking on LTE
Select the requiredband from the drop
down menu.
Click on Lock Bandto lock the deviceto the required
band.
Perform a manualreboot for lockingthe device to the
required Band
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
20/49
Mobile CEM LabsProprietary
20 Technology * Benchmarking *Consulting
Check that thedevice has been
locked to thedesired Band
Click on ReleaseBand and manuallyrestart to put thedevice on default
band.
Steps for Band Locking only for LTE
Go to Top
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
21/49
Technology * Benchmarking *Consulting
LTE TESTExecute, Monitor & Check Report
Go to Top
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
22/49
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
23/49
Mobile CEM LabsProprietary
23
Launch the application and Get the License
Technology * Benchmarking *Consulting
Go to Top
Click Get Licenseto enter theapplication
You may Checkyour devices IMEI
and version ofapplication
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
24/49
Mobile CEM LabsProprietary
24
Add and Load the Test
Technology * Benchmarking *Consulting
Go to Top
Click Add buttonto list all the
available TESTs
Select the respectivetest
(Ericsson_EFNI_Ts.xml)to be executed and click
LOAD
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
25/49
Mobile CEM LabsProprietary
25
Start the Test
Technology * Benchmarking *Consulting
Click START. Fill theSITE ID and USER ID.Select the technologyyou are testing and
carrier
Go to Top
Clicksubmit toexecute
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
26/49
How to see the Test Report on Device for last Days
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
27/49
Mobile CEM LabsProprietary
27
How to see the Test Report on Device for last Day stest
Technology * Benchmarking *Consulting
Go to Top
To the right of SCHEDULERTab, Click on the REPORT
Tab to see the summary ofreport of last tested site
Click on MenuButton on Device
to see theoptions.
Click onTechnology to
fetch your
desired report
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
28/49
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
29/49
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
30/49
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
31/49
Mobile CEM LabsProprietary
31 Technology * Benchmarking *Consulting
Thelocked/requestedfrequency will bedisplayed after the
restart
Click on unlock
frequency to unlockthe device andperform a manual
restart
Steps for Frequency Locking only for UMTS
Go to Top
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
32/49
Technology * Benchmarking *Consulting
UMTS TESTExecute, Monitor & Check Report
Go to Top
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
33/49
h h l d h
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
34/49
Mobile CEM LabsProprietary
34
Launch the application and Get the License
Technology * Benchmarking *Consulting
Click Get Licenseto enter theapplication
You may Checkyour devices IMEI
and version of
application
Go to Top
dd d d h
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
35/49
Mobile CEM LabsProprietary
35
Add and Load the Test
Technology * Benchmarking *Consulting
Click Add buttonto list all the
available TESTs
Select the respective test(Ericsson_UMTS_EFNI_Ts.xml)to be executed and click LOAD
Go to Top
S h T
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
36/49
Mobile CEM LabsProprietary
36
Start the Test
Technology * Benchmarking *Consulting
Click START. Fill theSITE ID and USERID. Select the
technology you aretesting and thecarrier (1C/2C)
Go to Top
Clicksubmit toexecute
M it th t t
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
37/49
Mobile CEM LabsProprietary
37
Monitor the test
Technology * Benchmarking *Consulting
Click on theMONITOR Tab tosee the execution
of test
List of Activitieswill comes whichwith individualstatus in front
Go to Top
How to see the Test Report on Device for last Days
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
38/49
Mobile CEM LabsProprietary
38
How to see the Test Report on Device for last Day stest
Technology * Benchmarking *Consulting
To the right ofSCHEDULER Tab, Clickon the REPORT Tab tosee the summary of
report of last tested site
Go to Top
Click on MenuButton onDevice to seethe options.
Click onTechnology
to fetch your
desiredreport
How to see the Test Report on Device for last Days
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
39/49
Mobile CEM LabsProprietary
39
How to see the Test Report on Device for last Day stest
Technology * Benchmarking *Consulting
Go to Top
Choose the type of reportyou want to fetch,
depending upon the testyou executed LTE or UMTS?
Report offollowing type
should come up
Report Tab will keep on listing allthe results for the sites tested for
the current day
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
40/49
Technology * Benchmarking *Consulting
How to Lock a Handset on UMTS
Go to Top
L k H d t t UMTS
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
41/49
Mobile CEM LabsProprietary
41
Lock a Handset to UMTS
Technology * Benchmarking *Consulting
Remove the Sim fromthe phone and switchon the phone withoutthe sim card.
Dial *#2263# onthe phone keypadto open theServiceModemenu.
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
42/49
Lock a Handset to UMTS
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
43/49
Mobile CEM LabsProprietary
43
Lock a Handset to UMTS
Technology * Benchmarking *Consulting
Once the Bandis selected,switch off thephone.
Put the Sim Card inand Restart thePhone. The phoneis now locked to theselected band.
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
44/49
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
45/49
FAQs and Helpful Tricks
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
46/49
Mobile CEM LabsProprietary
46
FAQs and Helpful Tricks
What if on loading the Test in Scheduler Tab, it doesnt get listed?
A. Restart the Device and then try scheduling the test.
What if your device couldnt GET LICENSE?
A. Click on CONTACT SUPPORT button to send the device details forregistration
What if you get a message on GETTING LICENSE Mobi-Reportersnew version available!?
A. You might have an incorrect version installed on your device forMobi Reporter. Check administration to get the correct version
What if you get a message on GETTING LICENSE mCEMAAHandys new version available!?
A. You might have an incorrect version installed on your device formCEMAA Handy. Check administration to get the correct version
Technology * Benchmarking *Consulting
Go to Top
FAQs and Helpful Tricks
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
47/49
Mobile CEM LabsProprietary
47
FAQs and Helpful Tricks
What if on running the test you get a message Incorrect Appversion?
A. Check the versions of both the applications and install the correctversions.
How to check your devices IMEI and Versions installed in it?
A. In mCEMAA Handy app, check the versions in DATA TAB to see
MR Version and MRA Version. If you are not able to get into themCEMAA Handy application. Check the version on the GETLICENSE page itself, right bottom corner.
What if clicking on REPORT TAB shows No report available for lastsite?
A. Your report must be getting processed at server end, Wait for awhile and then refresh from the menu button while you are insidethe report tab
Technology * Benchmarking *Consulting
Go to Top
FAQs and Helpful Tricks
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
48/49
Mobile CEM LabsProprietary
48
FAQs and Helpful Tricks
What if on start of TS and filling user id/site id information, device
gives error Technology mismatchA. Check the technology on the network bar below various tabs in
the application and make sure you are selecting the sametechnology. Also make sure is that the same technology you wantto perform your test
What if on start of TS and filling user id/site id information, devicegives error PSC/PCI mismatch
A. The PSC or PCI you are entering must match with what device isreceiving at the moment when you are starting your test. If itdoesnt, you can check what PSC or PCI your device is ON, fromthe network bar below various tabs, and then start the test.
Technology * Benchmarking * Consulting
Go to Top
Thank You!!
-
7/29/2019 EFNI (ACT) - MoP - MobileCEM Labs_v3.0
49/49
Thank You!!
Your Partner in CEMAATM Strategy