Type:
Execution class:
Design:
Method of declaration:
Welding processes:
Parent material/Steel group:
Responsible Welding Coordinator:
Steel structure components intended for use in construction works
Up to and including EXC 3 according to EN 1090-2:2008+A1:2011
Included
11213a13b, according to EN 1090-1:2009+A1:2011, clause ZA.3.2/ZA.3.3/ZA.3.4/ZA.3.5
111 and 135 according to EN 1090-2:2008+A1:2011, clause 7.3
S235 up till and including S355.
A.M. van Boxel
for t
DET NORSKE Notified B
ERITAS CE
NETHE
DINV
DNV BUSINESS ASSURANCE CERTIFICATE OF CONFORMITY OF THE FACTORY PRODUCTION CONTROL
Certificate No. 2388-CPR-0002 Rev. 1 This Certificate consists of 2 pages
In compliance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the Construction Products Regulation), this certificate applies to the construction product
Structural Components for Steel Structures
produced by or for
Jac. Reijns Staalconstructie Alphen B.V. Looiersweg 7, 5131 BE, Alphen (NB), Netherlands
and produced in the manufacturing plant(s)
Jac. Reijns Staalconstructie Alphen B.V. Looiersweg 7, 5131 BE, Alphen (NB), Netherlands
This certificate attests that all provisions concerning the assessment and verification of constancy of performance described in Annex ZA of the standard(s)
EN 1090-1:2009+A1:2011
under system 2+ are applied and that
the factory production control fulfils all the prescribed requirements set out above.
This certificate remains valid during a four year period as long as the test methods and/or factory production control requirements included in the harmonised standard, used to assess the performance of the declared characteristics, do not change, and the product, and the manufacturing
conditions in the factory or the plant are not modified significantly.
Initial Certification date:
Place and date:
2014-06-30 Barendrecht, 2014-07-16
This Certificate is valid until:
2018-06-30
PHODUCTS The audit has been performed under the supervision of: IIVA C 312
Marco Paans Lead Auditor
D.P. Koe Management Representative
Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid. Accredited Unit:Det Norske Veritas Certification B.V. Zwolseweg 1, 2994 LB Barendrecht, The Netherlands, TEL: +31 10 2922 688 - www.dnvba.com
Page 1 of 2