www.scrollsawworkshop.blogspot.com
Digital PatternsDesigned bySteve Good
Home of Scroll Saw Pattern Printer
Copyright Steve Good [email protected]
Piano body1” thick
5” x 4”
Keyboard 1/4” thick5” x 3/4”
Piano Top 1/4” thick
5 ½” x 1 1/4”
R
S
Q
Cam followers 1/4” thickT U
Other materials you will need to completethis project.
Metal Coat hanger
But two 7 inch straight sections.
Wooden Dowel
Use whatever size dowel you have available.Just use the appropriate drill bits when drilling the holes in the frame and body.
Notice the cam followers.These are parts T & U.
Epoxy to wires.
Cams N & O gluedto the dowel. Make
the high point of eachcam is opposite.
Please watch the video on the blog forconstruction tips.
Notice that the wires go through the feet andfloor. You want to make sure these holes all line up with the cam followers belowthe floor. The wires should be straight upfrom the cams.
Leave the coat hanger wires long until you have the piano made. Then use the keyboard height to set the position of the arms touchingthe keys while the cam is at it’s low point. Onceyou have that set cut and bend the wire throughthe wrist hole.