Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
DR. D. Y.PATIL INSTITUTE OF ENGINEERING,
MANAGEMENT & RESEARCH, AKURDI, PUNE – 44
DEPARTMENT OF MECHANICAL
ENGINEERING
REPORT ON TECHNICAL EVENT
ARCADIA 2K19
Date: 10th & 14th February, 2019
ORGANIZING TEAM:
1. Mr. Kiran M. Narkar (HOD, Department of Mechanical Engineering)
2. Mr. Vishvanath R. Solapure (Overall Faculty Coordinator)
3. Mr. Ajay Gatkal (MESA President & Overall Technical Event Coordinator)
4. Mr. Gaurav Wadikar (MESA Vice-President)
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
FOREWORD
Students’ Association of Mechanical Department, (MESA) at Dr. D. Y. Patil Institute of
Engineering, Management & Research, Akurdi, is the student body whose mission is to provide an
accredited dynamic scholarly environment, wherein students learn independently and in
collaboration with others to develop professional, communications and leadership abilities by
organizing events and activities. The primary focus of these activities is to advance students’
knowledge, self-confidence, provide needed recreational opportunities, help them enhance their
skill sets and develop important aspects of personality, soft skills, viz: leadership, team spirit,
sense of responsibility and accountability etc. and thus, groom them professionally to reach their
potential.
The key objective of this Technical Event was to help the students’ develop the
participation spirit among them, which would involve, functioning independently, without need
for constant reassurances from others; reasonable risk-taking; demonstration of personal control;
self-motivation; feelings of usefulness; development and confirmation of identity; confidence,
ethics, and integrity; realistic self-appraisal and self-understanding with competent technical
knowledge, team work and healthy competition. We would like to thank to Campus Chairman
Hon. Satej D. Patil, Campus Director Col. S. K. Joshi, Principal Dr. Mrs. A.V. Patil, Assistant
Registrar Mr. Y. K. Patil and Dr. Mrs. Minaz Alvi for their support and guidance for organizing
technical events for students.
Mr. Ajay Gatkal
Student Coordinator
Mr. V R Solapure
Department
Technical Incharge
Mr. S. B. Solepatil
MESA Coordinator
Prof. Kiran Narkar
H.O.D. [Mech.]
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
OBJECTIVES
1. Appreciate and be able to execute strategic play.
2. Participate at a level appropriate to one's developmental stage.
3. Share in the planning and administration.
4. Provide reasonable leadership.
5. Work effectively within a group toward common goals.
6. Appreciate the rituals and conventions that give particular
Technical their unique meanings.
7. Develop the capacity to make reasoned decisions.
8. Develop and apply knowledge to practical life.
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
DEPARTMENT OF MECHANICAL ENGINEERING
Time-Table for Technical Events
ARCADIA - 2K19
Sr.
No.
Name of Event Date Venue
1 Robo - Soccer 11 - 12/02/2019 Basement & C.R. 5
2 Bot Wrestling 11 - 12/02/2019 Basement & C.R. 5
3 Spot – PPT 13 - 14/02/2019 CAD Lab 1 & 2
4 Junk – Machines 13 - 14/02/2019 First floor & C.R. 14
5 CAD - War 13 - 14/02/2019 CAD Lab 1 & 2
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
No. of Registrations
Event
No.
Event Name No. Of Registrations
(Teams)
No. of Participants
1 Robo-Soccer 12 48
2 Bot Wrestling 11 44
3 Spot – PPT 13 39
4 Junk – Machines 17 51
5 CAD - War 18 36
Total No. of Participants 218
Mr. Ajay Gatkal
Student Coordinator
Mr. V R Solapure
Department
Technical Incharge
Mr. S. B. Solepatil
MESA Coordinator
Prof. Kiran Narkar
H.O.D. [Mech.]
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
JUDGES PANEL
Sr. No. Name of Judge Industry/College
CAD WAR
1 Mr. Vineet Kadam
(Alumni) R&D QA Engineer
3DPLM Pune
2 Mr. Y.N. Jangale
Asst. Prof.
DYPIEMR, Pune
3 Mr. N.S. Modgi
Asst. Prof.
DYPIEMR, Pune
Spot - PPT
1. Mr. Amol Mali
Asst. Prof.
DYPIEMR, Pune
2. Mr. S. R. Kakad
Asst. Prof.
DYPIEMR, Pune
JUNK MACHINES
1. Mr. Mithun Sawant
Asst. Prof. (Civil Dept.)
DYPIEMR, Pune
2. Mr. S.S. Gaikwad
Asst. Prof.
DYPIEMR, Pune
3. Mr. P.R. Tripathi
Asst. Prof.
DYPIEMR, Pune
Mr. Ajay Gatkal
Student Coordinator
Mr. V. R. Solapure
Department
Technical Incharge
Mr. S. B. Solepatil
MESA Coordinator
Prof. Kiran Narkar
H.O.D. [Mech.]
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
CAD WAR
Rule Book
1. Entry fees for participants is 50/-
2. There will be three rounds as follows
A. MCQ round (Qualifying round)
B. Part Design
C. Assembly
3. Part design and Assembly are combined round's
4. Students who qualify the specific prescribed marks will be qualified for next level i.e Part design
5. Duration for Part Designing and Assembly will be of 2 hours.
4. Winners would be decided on the following parameters
A. Time duration in which the total assembly is completed
B. Accuracy of part design.
C. Addition of the marks obtained in all the three round
Registration fees:
Rs. 50/student
Total Prizes:
1st Rs. 1500/-
2nd Rs. 1000/-
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
Participants
Sr. No. Name of Participant College
1 Jeevan Ahire DYPIEMR
2 Omkar borhade DYPIEMR
3 Ankita Kalhapure DYPIEMR
4 Kamlesh Daware DYPIEMR
5 AshitoshDol DYPIEMR
6 Sujit Jamdale DYPIEMR
7 Shreyas Bande DYPIEMR
8 Utkarsh Rodge DYPIEMR
9 Swapnil Tundalwar DYPIEMR
10 Vinayak Awale DYPIEMR
11 Mauli Dahiphale DYPIEMR
12 Sahil Patel DYPIEMR
13 Rushikesh Mohite DYPIEMR
14 Akshay Raut DYPIEMR
15 Mehul Khiloshiya DYPIEMR
16 Kajal Bhor DYPIEMR
17 Maya Rasal DYPIEMR
18 Abhishek Prasad DYPIEMR
19 Nikhil Dhage DYPIEMR
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
20 Jayesh Yeola DYPIEMR
21 Shreyansh Jain DYPIEMR
22 Tushar Badgujar DYPIEMR
23 Ghanshyam Nalge DYPIEMR
24 Tejas Patil DYPIEMR
25 Shreyas Borse DYPIEMR
26 Digambar Daphal DYPIEMR
27 Saurabh Ghodke PCCOE
28 Pradhnyesh Suryawanshi DYPIEMR
29 Govinda Gondkar DYPIEMR
30 Jeevan Ahire DYPIEMR
31 Omkar borhade DYPIEMR
32 Ankita Kalhapure DYPIEMR
33 Harish Pawar DYPIEMR
34 Rakesh Gupta DYPIEMR
35 Sujit Jamdale DYPIEMR
36 Shreyas Bande DYPIEMR
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
CAD-WAR SCORE SHEET
Sr.
No.
Name of Participant Objective
(20)
Part
design
(15)
Time
(5)
Assembly
(10)
Total
(50)
1 Jeevan Ahire 7 5 - 3 15
2 Ankita Kalhapure 9 10 2 2 23
3 AshitoshDol 19 13 5 8 45
4 Sujit Jamdale 6 7 - 4 17
5 Shreyas Bande 9 12 3 3 27
6 Swapnil Tundalwar 18 10 2 4 34
7 Sahil Patel 8 9 1 4 22
8 Abhishek Prasad 8 5 - 3 16
9 Govinda Gondkar 18 15 5 8 46
10 Jayesh Yeola 7 9 1 1 18
11 Tushar Badgujar 11 15 2 5 33
12 Ghanshyam Nalge 7 10 2 2 21
13 Tejas Patil 14 8 2 2 26
14 Shreyas Borse 8 10 1 4 23
15 Digambar Daphal 7 11 3 3 24
16 Saurabh Ghodke 14 15 5 8 42
17 PradhnyeshSuryawanshi 8 14 2 1 25
18 Nikhil Dhage 10 17 - 4 31
Judges
Mr. Vineet Kadam (R&D QA Engineer)
Mr. Y.N. Jangale (Asst.Prof)
Mr. N.S. Modgi (Asst. Prof)
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
Glimpses of event
CAD – War: Judges explaining rules to participants
CAD – War: Judges explaining rules to participants
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
CAD – War: Participants doing design on CATIA
CAD – War- Co-ordinator clearing doubts of participants
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
CAD – War: Participants doing design on CATIA
CAD-War:
Winner - Govinda Gondkar (DYPIEMR, Pune)
Runner-up – Ashitosh Dol (DYPIEMR, Pune)
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
Spot PPT
INTRODUCTION:
We will give you topic and you have to make presentation based on that topic and then you
have to present that ppt in front of the judges. After your presentation is done judges will ask you
questions based on your ppt and you have to answer them simple isn’t it? This event will increase
your communication skill, confidence and it will also sharpen your technical knowledge.
RULES:
1) After topics are distributed no matter what, you won’t get to swap or change the given
topics.
2) Total time to make ppt – 2 hrs
3) Internet access will be for only 1 hr
4) Minimum 9 slides of main content should be there ( Maximum 12)
5) No plagiarism is allowed if co-ordinators even got hint of it then you will be disqualified
6) Co-ordinators have total authority to modify rules if circumstances demand so
7) The teams will get 10 minutes for presentation followed by question and answer session.
8) This is a team event. Each team would comprise of two members from the same institution.
Team composition cannot change once the college round is completed.
9) You need to register for the contest as a participant to volunteer by providing necessary
personal data, before the registration closing date.
10) Once you register for the event, you indicate your acceptance that the organizers decision
will be final and binding.
11) Prizes and certificates will be distributed for winning teams from inter-college contests.
College level winners will receive certificates.
12) Bring your college I-Card & receipt on event day. Otherwise you won’t be allowed
Registration fee:
1) Rs. 100 for one
2) Rs. 150 for two
Total Prize: Rs. 3500/-
1ST PRIZE: Rs. 1500/-
2ND PRIZE: Rs. 1000/-
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
*TOPICS for Presentations*
1. Heat Transfer
2. Social Media- Useful or Harmful
3. Machine Learning
4. Hydrogen Fuel Cell
5. Future Transport
6. Medical Applications of Nanobots
7. Industry 4.O
8. 3D Printing
9. Carbon Nanotubes
10. Accident Prevention Systems
11. Torque Converter
12. Geothermal Energy
13. Hybrid Vehicles
14. Space Debris
15. Cryptocurrencies- Bitcoins
16. Job VS Entrepreneurship
17. Teamwork
18. Green Technology
19. Agricultural Advancement
20. Plastic Recycling
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
Participants
Sr. No.
Participant Name
College
1. Tejas Barange
Rushikesh Manakar
DYPIEMR, Pune
2. Hrushikesh Bhavsar
Akhilesh Chavan
DYPIEMR, Pune
3. Digambar Daphal
Utkarsh Rodge
DYPIEMR, Pune
4. Pratap Ghuge
Vishal Ambhore
DYPIEMR, Pune
5. Ravi Rashinkar
Mayuresh Pund
DYPIEMR, Pune
6. Rohit Deshmukh
Vaishnav Ghadge
DYPIEMR, Pune
7. Akshay Raut
Mehul Khiloshiya
DYPIEMR, Pune
8. Makarand Gokhale
Jivtesh Amale
DYPIEMR, Pune
9. Chinmay Zagade
Vyom Patel
DYPIEMR, Pune
10 Amit Pawar
Hrushikesh Wadme
DYPIEMR, Pune
11 Shubham Sawant
Omkar Bhor
DYPIEMR, Pune
12 Prathmesh Shelar
Nachiket Padwal
DYPIEMR, Pune
13 Mithlesh Kadam DYPIEMR, Pune
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
Score Sheet: Spot PPT
Sr. No.
Participant Name College Total Marks
1. Tejas Barange Rushikesh Manakar
DYPIEMR, Pune 31
2. Hrushikesh Bhavsar Akhilesh Chavan
DYPIEMR, Pune 30
3. Digambar Daphal Utkarsh Rodge
DYPIEMR, Pune 29
4. Pratap Ghuge Vishal Ambhore
DYPIEMR, Pune 35
5. Ravi Rashinkar Mayuresh Pund
DYPIEMR, Pune 40
6. Rohit Deshmukh Vaishnav Ghadge
DYPIEMR, Pune 37
7. Akshay Raut Mehul Khiloshiya
DYPIEMR, Pune 29
8. Makarand Gokhale Jivtesh Amale
DYPIEMR, Pune 34
9. Chinmay Zagade Vyom Patel
DYPIEMR, Pune 32
10 Amit Pawar Hrushikesh Wadme
DYPIEMR, Pune 34
11 Shubham Sawant Omkar Bhor
DYPIEMR, Pune 30
12 Prathmesh Shelar Nachiket Padwal
DYPIEMR, Pune 27
13 Mithlesh Kadam DYPIEMR, Pune 25
Judges:
1. Prof. A. S. Mali
2. Prof. S. R. Kakad
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
Glimpses of Spot PPT
SPPT: Judges asking questions to participants
SPPT: Participants presenting presentation
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
SPPT: Participants presenting presentation
SPPT: Participants presenting presentation
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
SPPT: Participants preparing presentations
SPPT: Participants presenting presentation
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
Spot - PPT
Winner:
Mayuresh Pund & Ravi Rashinkar (DYPIEMR, Pune)
Runner-Up:
Rohit Deshmukh & Vaishnav Ghadge (DYPIEMR, Pune)
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
JUNK-MACHINES
EVENT OBJECTIVE:
This event tests your ability to make use of every available resource in an optimized
manner while racing against time. It gives you a chance to explore yourself and bring out a creative
and innovative spark to create something from junk i.e. “Jugaad from Kabaad”. Brainstorming,
innovation and fun, JUNK-MACHINES has it all. So, put on your hat of creativity, get ready to
dirty your hands and let the “Junkyard War” begin.
EVENT STRUCTURE:
Round 1: Complete the given task using the materials provided by the organizers. There will be elimination after the first round based on the points acquired in round 1and the shortlisted teams will compete in the final round for the title of the JUNK-MACHINES CHAMPIONS. RULES:
1. No external equipment other than that provided by the organizers can be used.
2. Using equipment of other participants is also strictly prohibited (i.e. using some extra material).
3. Participants can be of different colleges/institutions. But, one person may not be a part of
multiple teams for the same event.
4. The teams must adhere to the spirit of healthy competition and maintain decorum at all times.
5. Organizers reserve the right to disqualify any team indulging in misbehavior or violating any
rules.
6. In case of disputes, the decision of the organizers and the judges will be final and binding to all.
7. Any team that is not ready at the specified time will be disqualified from the competition
automatically.
8. Rules may be changed without prior intimation.
TEAM STRUCTURE AND ENTRY FEES
Registration fee:
Rs. 150/- per team (Maximum 3 participants per team)
Total Prize: Rs. 2500/-
1ST PRIZE: Rs. 1500/-
2ND PRIZE: Rs. 1000/
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
Participants
SR. NO. NAME OF PARTICIPANT COLLEGE NAME
1 VIPUL, ANIKET, PURUSHOTTAM DYPCOE, Pune
2 ROHIT, MITESH, PRATK DYPIEMR, Pune
3 ANIKET, RUSHIKESH, VIKAS DYPIEMR, Pune
4 SUHAS,BHARGAV, SOURABH DYPIEMR, Pune
5 AYUSH, TEJAS, PRADNYA DYPCOE, Pune
6 TEJAS, SHREYAS,SHUBHAM DYPIEMR, Pune
7 RUTUJA, ANJALI, MANALI DYPIEMR, Pune
8 PIYUSH, CHINMAY, HRUSHIKESH DYPIEMR, Pune
9 SOURABH, ANIKET, RISHIKESH DYPIEMR, Pune
10 SNCHAYATI, RUTUJA, MRUNAL DYPIEMR, Pune
11 GIRISH, SUSHAT, DEEPAK DYPIEMR, Pune
12 MAHESH, KAMLESH, RISHIKESH DYPIEMR, Pune
13 ANIKET, SAGAR, RUTURAJ DYPIEMR, Pune
14 RAJA, RAHUL, VAIBHAV DYPCOE, Pune
15 TUSHAR, AKHILESH, VISHAL DYPIEMR, Pune
16 AKSHAY, RAVINDRA, MEHULKUMAR DYPIEMR, Pune
17 SWAPNIL, SHREYASH,ABHISHEK DYPIEMR, Pune
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
RESULTS: Junk Machines
SR. NO. NAME OF PARTICIPANT COLLEGE SCORE
1 VIPUL, ANIKET, PURUSHOTTAM DYPCOE, Pune 24
2 ROHIT, MITESH, PRATIK DYPIEMR, Pune 25.33
3 ANIKET, RUSHIKESH, VIKAS DYPIEMR, Pune 26.83
4 SUHAS,BHARGAV, SOURABH DYPIEMR, Pune 44.33
5 AYUSH, TEJAS, PRADNYA DYPCOE, Pune 47.66
6 TEJAS, SHREYAS,SHUBHAM DYPIEMR, Pune 32.5
7 RUTUJA, ANJALI, MANALI DYPIEMR, Pune 40.66
8 PIYUSH, CHINMAY,
HRUSHIKESH DYPIEMR, Pune 27.5
9 SOURABH, ANIKET, RISHIKESH DYPIEMR, Pune 26.83
10 SNCHAYATI, RUTUJA, MRUNAL DYPIEMR, Pune 39
11 GIRISH, SUSHAT, DEEPAK DYPIEMR, Pune 10
12 MAHESH, KAMLESH, RISHIKESH DYPIEMR, Pune 21.5
13 ANIKET, SAGAR, RUTURAJ DYPIEMR, Pune 21
14 RAJA, RAHUL, VAIBHAV DYPCOE, Pune 15.16
15 TUSHAR, AKHILESH, VISHAL DYPIEMR, Pune 41
16 AKSHAY, RAVINDRA,
MEHULKUMAR DYPIEMR, Pune 27.16
17 SWAPNIL, SHREYASH,ABHISHEK DYPIEMR, Pune 45.5
Judges:
1. Prof. S. S. Gaikwad
2. Prof. P. R. Tripathi
3. Prof. Mithun Sawant
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
Approved by A.I.C.T.E,
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044.
Website : www.dypiemr.ac.in
Glimpses of event: Junk Machines
Junk-Machines: Prof
Junk-Machines:
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH pproved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020
www.dypiemr.ac.in Email : [email protected]
Glimpses of event: Junk Machines
Prof. K. M. Narkar & Faculties inaugurating event
Machines: View of Participates Making the Models
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
, Maharashtra State Government, Affiliated to Savitribai
27654470, Fax: 020-27656566
. K. M. Narkar & Faculties inaugurating event
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
Junk-Machines: Guidelines to Participants by Volunteers for Preparing Models
Junk-Machines: Models Prepared By Participants
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
Junk Machines: Distribution of prizes and certificates to winners by the hands of HOD Sir and
Faculty
Junk Machines
Winner: AYUSH, TEJAS, PRADNYA (DYPIEMR, Pune)
Runner-Up: SWAPNIL, SHREYASH, ABHISHEK (DYPIEMR, Pune)
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
ROBO-SOCCER
The League of Footballer Robots
INTRODUCTION:
Football- The most breath-taking game becomes even more so when It’s the robots that
play the game! Bring your footballer-bot to the game and become a part of the most attractive of
the events of “ANKURAN 2K18”. As an event that surely keeps everyone’s eyes transfixed on the
field, Robo-Soccer does not fail to entertain and teach at the same time. Explore the Robotics-
aspect of ANKURAN 2K18 and experience the extravagant thrill as you make your bot wade past
the opponent and …that’s right – SCORE!
RULES:
• Max Current 5A.
1. A maximum of 3 candidates pursuing undergraduate program in their institution are allowed per
team.
2. Registration fee is Rs.250/- per team.
3. Teams can register at the desk put up in various colleges in and around Pune. Teams can also
register at the registration desk on the day of the event, at least an hour prior to the event.
4. ROBOT LIMITATIONS
Maximum robot dimensions: 30cm x 30 cm x 30 cm.
Maximum weight 3 kg.
Power specifications:
Max Voltage: 12V (Normal Operation).
The robot cannot split into two independent parts.
Robot should be manually controlled.
No weapons (blades, spikes) of any kind are to be attached onto the robot.
The participants are allowed to use any number of actuators/ controller switches.
5. There should be no intentional damage done to the other robot by means of attacking wires,
wheels, motors etc.
6. NOTE: Any intentional damage to the field or to the opposing robot would result in immediate
disqualification of the team.
7. MATCH:
The duration of each match will be 8 minutes (i.e. two halves, each of 4 minutes duration).
A one minute break will be given after half time during which the teams will be allowed to attend
to their robots.
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
Each match will be a one-on-one match between two similar teams selected randomly. For
scoring system, refer to 8.A.
The team with the highest number of points is the winner of the match. In case of a tie, a tie
breaker round will be held, details of which will be announced at the time of the event.
The teams will be short-listed for final rounds on the basis of their score in the elimination
round.
In final rounds, matches will be one-on-one with a scoring system as in 8.A.
8. SCORING:
A. Elimination round:
I. Goal from inner circle: +20 points.
II. Goal from between inner circle and half line: +40 points
III. Goal from beyond half line: +60 points
IV. Negative points for fouls.
V. Disqualification after warning.
Note: This may change at the time of the event
9. A yellow card will be flashed on each hand touch after the first one. A maximum of three such
cards will add up to a red card i.e. Disqualification.
10. Losing teams may re-register to participate again in the elimination round. Registration fees
would be Rs.150/- for this case. (Organizers reserve the rights to close the re-registrations at any
point of time).
11. Organizers have the authority to disqualify any team for misconduct or disorderly behavior.
This team would not be allowed to re-register.
12. Organizers reserve the rights to make changes to the field design at any time without prior
notification.
13. Organizers' decisions will be final and binding to all.
Registration Fees:
Rs. 250/- per team
Total Prize: Rs. 6000/-
1ST PRIZE: Rs. 4000/-
2ND PRIZE: Rs. 2000/-
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
Registrations
Sr. No. Team Name College
1 KIRA DYPIEMR, Pune
2 TORQUE DYPIEMR, Pune
3 Jaguar PDEA, Pune
4 GlitchAR DYPIEMR, Pune
5 Deadpool DYPIEMR, Pune
6 ELECTRUS DYPIEMR, Pune
7 AVI-1 AISSMS, Pune
8 AVI-2 AISSMS, Pune
9 MESSI JSPM Tathawde, Pune
10 NEYMAR JSPM Tathawde, Pune
11 RONALDO JSPM Tathawde, Pune
12 THUNDERBOLT DYPIEMR, Pune
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
Glimpses of event
Robo-Soccer: Prof. K. M. Narkar & Faculties inaugurating event
Robo-Soccer: Volunteers working for event
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
Robo-Soccer: HOD Sir chasseing a goal with Bot
Robo-Soccer: During bot match
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
Robo-Soccer: Prof. A. N. Umbrajkar distributing prizes and certificates to winner team
Robo-Soccer: Dr. P. B. Salunkhe distributing prizes and certificates to runner-up team
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
Robo-Soccer:
Winner: Team Jaguars (PDEA’s COEM, Pune)
Runner-Up: Team Glitchar (DYPIEMR, Pune)
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
BOT WRESTLING
EVENT OVERVIEW:
Bot Wrestling is basically a competition of two wired or wireless robots competing in an
attempt to push the opponent out of the arena. These robots must be remote operated.
EVENT STRUCTURE:
The arena consists of two concentric rings- inner one blue surrounded by a red boundary. The aim
of the robots is to push the opposition robot out of the outer circle. Robots gains points for pushing
the opposition robot in the red zone. Points are deducted from the teams score if it enters the red
zone. The team that scores maximum points in given play time will be declared as winner.
EACH ROUND WILL BE A KNOCKOUT ROUND. Knockout Round:
1.Two teams will compete against each other .
2. The team which wins round will be declared the winner of the match.
3.The team that pushes the opposition robot out of the arena is declared with a point.
4.The scoring pattern will be uniform throughout .
5.In case of a tie in a round (i.e. none of the team’s robot is able to push opposition robot out of the
arena), the winner will be decided by the points earned by each team in tie breaker round.
6.In case of a tie in the match, the winner of the match will be decided by a tie breaker.
TASK:
1.Teams must build a robot which can be wired or wirelessly controlled using a remote.
2.The aim of the robot is to push the robot of the opposite team out of the arena. The team doing so
wins the match.
Arena:
1.The arena will be square in shape of side 7ft.
2.The main arena will be a circular in shape with a maximum diameter 6ft.
3.There are white squares of 300 mm x 300 mm on the opposite sides of this line that indicate the
starting zones of the two competing teams.
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
4.The arena will be made up of wood and the markings on it including all the zones will be drawn
using paint.
Machine Specifications:
1.The machine should fit in a square of 300mm x 300mm. There is no height limit.
2.The combined weight of the robot must not exceed 3.5kg.
3.If the team is using a wired remote or a laptop or a mobile phone for
controlling the robot then its weight is not included in the above.
4.The robot must be stable and must stand on its own at the beginning of the run when put in the
starting point. Robots not fulfilling this criterion will be disqualified.
5.During the match, the robot can expand itself provided it does not damage the arena in anyway.
However, the machine should not leave anything behind while competing. The machine should not
scratch, damage or destroy the arena or accompanying parts of arena.
The machine should not shoot anything at the opponent’s robot. 6.Any robot found damaging the
arena will be immediately disqualified. The final decision is at the discretion of the organizers.
7.Readymade (market sold) robot with or without modifications will not be allowed in the
competition.
Power supply:
1.Maximum power supply of 12V will be provided.
2. Voltage on the machine at any point should not exceed 12 V DC.
GENERAL RULES:
1.Any team that is not readyat the time specified will be disqualified from the competition
automatically.
2.The machine will be checked for its safety before each match and will be discarded if found
unsafe for other participants and spectators.
3.Team members will not be allowed to step in the arena. Only organizers are allowed in any
situation. The team will be disqualified if any of the team members steps on the arena
without the approval of the presiding organizers.
4.Only one member of the team is allowed to handle and operate the robot.
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
5.Participants are not allowed to keep anything inside the arena other than its robot.
6.No robot is allowed to use any flammable, combustible, explosiveor potentially dangerous
processes.
7.Proper protection majors from short-circuiting of batteries are required to be taken by
participants for the safety of everyone present at arena.
8.The time measured by the organizers will be final and will be used for scoring the teams. Time
measured by any contestant by any other means is not acceptable for scoring.
9.In case of any disputes/discrepancies, the organizers’ decision will be final and binding.
The organizers reserve the rights to change any or all of the above rules as they deem fit..
10.Judges’ decision shall be treated as final and binding on all.
11.Rules may be changed without prior intimation. Participants are requested get updated with
organisation Committee
Hand Touch:
1.Two hand touches are allowed in between the matches.
2.Further hand touches would cost reduction in points.
3.If a participant takes a hand touch, the clock will be paused.
TEAM AND FEE STRUCTURE:
Team size :Maximum of 4 members per team.
Registration fee :₹200/- per team.
Prize :
1st Prize : 3000Rs.
2nd Prize: 2000Rs.
CONTACT US:
1.Ashish Naidu : 8554028595
2.Abhishek ghatge : 9923181078
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
Registrations
SR NO TEAM NAME COLLEGE NAME
1 VC -1 JSPM Tathawde
2 VC-2 JSPM Tathawde
3 VC-3 JSPM Tathawde, Pune
4 AVI-1 AISSMS, Pune
5 AVI-2 AISSMS, Pune
6 SPARX-1 PCCOER, Pune
7 SPARK-2 PCCOER, Pune
8 MARS Sinhagad Vadgaon, Pune
9 JAGUAR PDEA’S COEM, Pune
10 ELECTRUS DYPIEMR, Pune
11 KHAN WARRIORS DYPIEMR, Pune
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
Glimpses of event
Bot Wrestling: Participants trying to push opponent out of the circle
Bot Wrestling: Participants trying to push opponent out of the circle
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
Bot Wrestling: Faculties watching the match
Bot Wrestling: During match between 2 bots
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
Robo-Soccer: Team Jaguar being awarded for their excellence in both the events
BOT-WRESTLING
WINNER: Team Jaguars (PDEA’s COEM, Pune)
RUNNER – UP: Team Mars (Sinhagad COE, Vadgoan, Pune)
Dr. D. Y. Patil Pratishthan’s
DR. D. Y. PATIL INSTITUTE OF ENGINEERING, MANAGEMENT &
RESEARCH Approved by A.I.C.T.E, New Delhi, Maharashtra State Government, Affiliated to Savitribai
Phule Pune University
Sector No. 29, PCNTDA, Nigdi Pradhikaran, Akurdi, Pune 411044. Phone: 020–27654470, Fax: 020-27656566
Website : www.dypiemr.ac.in Email : [email protected]
Inno-Vision 2K19
DEPARTMENT OF MECHANICAL ENGINEERING
ARCADIA 2K19
Date: 11th & 14th February, 2019
Report on Technical Event prepared by:
1. Mr. Ajay Gatkal (MESA President & Overall Student Coordinator)
9890025330
2. Mr. V. R. Solapure (Assistant Professor – Mechanical Department)
9860753134